{
    "version": 2,
    "name": "3Dator",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "3Dator GmbH",
        "manufacturer": "3Dator GmbH",
        "file_formats": "text/x-gcode",
        "supports_usb_connection": true,
        "platform": "3dator_platform.3mf",
        "machine_extruder_trains":
        {
            "0": "3dator_extruder_0"
        }
    },

    "overrides": {
        "machine_name": { "default_value": "3Dator" },
        "prime_tower_size": { "default_value": 8.660254037844387 },
        "infill_sparse_density": { "default_value": 20 },
        "layer_height": { "default_value": 0.2 },
        "speed_print": { "default_value": 50 },
        "machine_heated_bed": { "default_value": true },
        "machine_center_is_zero": { "default_value": false },
        "machine_height": { "default_value": 260 },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_depth": { "default_value": 170 },
        "machine_width": { "default_value": 180 },
        "retraction_speed": {"default_value":100},
        "adhesion_type": { "default_value": "none" },
        "machine_head_with_fans_polygon": {
            "default_value": [
                [-15, -25],
                [-15, 35],
                [40, 35],
                [40, -25]
            ]
        },
        "gantry_height": {
            "value": "30"
        },
        "machine_start_gcode": {
            "default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21  ;metric values\nG90  ;absolute positioning\nM82  ;set extruder to absolute mode\nM107  ;start with the fan off\nG28 Z0  ;move Z to min endstops\nG28 X0 Y0  ;move X/Y to min endstops\nG29  ;Auto Level\nG1 Z0.6 F{speed_travel} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0  ;zero the extruded length\nG1 X10 E30 F500  ;printing a Line from right to left\nG92 E0  ;zero the extruded length again\nG1 Z2\nG1 F{speed_travel}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white"      },
        "machine_end_gcode": {
            "default_value": "M104 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off (if you have it)\nG91                                    ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28                          ;move X/Y to min endstops, so the head is out of the way\nM84                         ;steppers off\nG90                         ;absolute positioning"
        }
    }
}