{ "name": "JGAurora A3S", "version": 2, "inherits": "fdmprinter", "metadata": { "visible": true, "author": "Samuel Pinches", "manufacturer": "JGAurora", "file_formats": "text/x-gcode", "preferred_quality_type": "normal", "machine_extruder_trains": { "0": "jgaurora_a3s_extruder_0" } }, "overrides": { "machine_name": { "default_value": "JGAurora A3S" }, "machine_start_gcode": { "default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --" }, "machine_end_gcode": { "default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y200 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --" }, "machine_width": { "default_value": 205 }, "machine_height": { "default_value": 205 }, "machine_depth": { "default_value": 205 }, "machine_heated_bed": { "default_value": true }, "machine_center_is_zero": { "default_value": false }, "gantry_height": { "value": "10" }, "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "material_diameter": { "default_value": 1.75 }, "layer_height_0": { "default_value": 0.12 }, "wall_thickness": { "value": "1.2" }, "speed_print": { "default_value": 35 }, "support_enable": { "default_value": true }, "retraction_enable": { "default_value": true }, "retraction_amount": { "default_value": 8 }, "retraction_speed": { "default_value": 45 } } }