{
    "version": 2,
    "name": "Kosher",
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "Venkat Kamesh",
        "manufacturer": "Sri Vignan Technologies",
        "weight": 3,
        "file_formats": "text/x-gcode",
        "platform": "ultimaker3_platform.obj",
        "platform_texture": "koshertext.png",
        "platform_offset": [0, 0, 0],
        "has_material": true,
        "has_variants": true,
        "preferred_variant_name": "0.4 mm Nozzle",
        "machine_extruder_trains":
        {
            "0": "kosher_extruder_0",
            "1": "kosher_extruder_1"
        }
    },

    "overrides": {
        "machine_name": { "default_value": "Kosher" },
        "machine_width": { "default_value": 220 },
        "machine_height": { "default_value": 300 },
        "machine_depth": { "default_value": 220 },
        "machine_heated_bed": { "default_value": true },
        "machine_acceleration": {"default_value": 3000},
        "machine_max_feedrate_x": { "value": 300 },
        "machine_max_feedrate_y": { "value": 300 },
        "machine_max_feedrate_z": { "value": 40 },
        "machine_max_feedrate_e": { "value": 150 },
        "machine_use_extruder_offset_to_offset_coords": {"default_value": false},
        "machine_center_is_zero": {"default_value": false},
        "gantry_height": {"value": "48"},
        "line_width": {"value": "machine_nozzle_size"},
        "speed_travel": {"maximum_value": "300", "value": "200"},
        "optimize_wall_printing_order": { "value": "True" },
        "material_diameter": { "default_value": 1.75},
        "retraction_amount": {"default_value": 6.5},
        "retraction_speed": { "default_value": 30},
        
		"adhesion_type": { "default_value": "skirt" },
        "machine_gcode_flavor": { "default_value": "Marlin"},
	   "ironing_enabled":{"default_value": true},

        "machine_start_gcode": { "default_value": "M605 S0\nG21\nG90\nM82\nM107\nG28\nT1\nG92 E0\nG1 E16 F210\nG92 E0\nT0\nG92 E0\nG1 E16 F210\nG92 E0\n" },
        "machine_end_gcode": { "default_value": "G91\nG1 Z+0.5 E-16 Y+10 F9000\nG90\nM107\nM104 S0 T1\nM104 S0 T0\nM140 S0\nG28 X0 Y0\nT0\nM605 S1\nM84" },
        "machine_extruder_count": { "default_value": 2 }
    }
}