{
    "version": 2,
    "name": "Maker Made 300x",    
    "inherits": "fdmprinter",
    "metadata": {
        "visible": true,
        "author": "DragonJe",
        "manufacturer": "Maker Made",
        "file_formats": "text/x-gcode",
        "platform_offset": [0, 0, 0],
        "has_materials": true,
        "has_variants": false,
        "preferred_quality_type": "normal",
        "has_machine_quality": false,
        "preferred_material": "generic_pla",
        "machine_extruder_trains":
        {
            "0": "maker_made_300x_extruder_0"
        }
    },

    "overrides": {
        "machine_name": {"default_value": "Maker Made 300x"},
        "machine_width": {"default_value": 300},
        "machine_height": {"default_value": 400},
        "machine_depth": {"default_value": 300},
        "machine_head_with_fans_polygon": {"default_value": [[-30, 34],[-30, -32],[30, -32],[30, 34]]},
        "gantry_height": {"value": "30"},
        "machine_heated_bed": {"default_value": true},
        "material_diameter": {"default_value": 1.75},
        "machine_gcode_flavor": {"default_value": " RepRap (Marlin/Sprinter)"},
        "machine_start_gcode": {"default_value": "G28 ;Home\n G29 ;Auto Level\n G92 E0 ;Reset Extruder\n G1 Z5.0 F3000 ;Move Z Axis up\n G1 X25 Y295.0 Z0.28 F3000.0 ;Move to extrude\n G1 X250 Y295.0 Z0.28 F1500.0 E15 ;Draw the first line\n G1 X25 Y290.0 Z0.28 F3000.0 ;Move to side a little\n G1 X250 Y290.0 Z0.28 F1500.0 E30 ;Draw the second line\n G92 E0 ;Reset Extruder\n G1 Z5.0 F3000 ;Move Z Axis up" },
        "machine_end_gcode": {"default_value": "M104 S0\n M140 S0\n ;Retract the filament\n G92 E1\n G1 E-1 F300\n G28 X0 Y0\n G1 Y300 F3000 ;Move bed forward\n M84" },

        "layer_height": {"value": 0.16},
        "layer_height_0": {"value": 0.32},
        "line_width": {"value": 0.4},
        "wall_line_width_0": {"value": 0.4},
        "initial_layer_line_width_factor": {"value": 100},
        "wall_thickness": {"value": 0.8},
        "wall_0_wipe_dist": {"value": 0.2},
        "roofing_layer_count": {"value": 1},
        "top_bottom_thickness": {"value": 0.6},
        "top_thickness": {"value": 0.8},
        "top_layers": {"value": 5},
        "bottom_thickness": {"value": 0.6},
        "bottom_layers": {"value": 3},
        "top_bottom_pattern": {"value": "'lines'" },
        "top_bottom_pattern_0": {"value": "'lines'" },
        "wall_0_inset": {"value": 0},
        "optimize_wall_printing_order": {"value": false },
        "inset_direction": {"value": "'inside_out'" },
        "alternate_extra_perimeter": {"value": false },
        "filter_out_tiny_gaps": {"value": true },
        "fill_outline_gaps": {"value": true },
        "xy_offset": {"value": 0},
        "skin_no_small_gaps_heuristic": {"value": true },
        "skin_outline_count": {"value": 1},
        "ironing_enabled": {"value": false },
        "infill_sparse_density": {"value": 20 },
        "zig_zaggify_infill": {"value": false },
        "infill_multiplier": {"value": 1},
        "infill_wall_line_count": {"value": 0},
        "infill_overlap": {"value": 10},
        "skin_overlap": {"value": 5},
        "infill_wipe_dist": {"value": 0.1},
        "gradual_infill_steps": {"value": 0},
        "infill_before_walls": {"value": false },
        "infill_support_enabled": {"value": false },
        "max_skin_angle_for_expansion": {"value": 90},
        "default_material_print_temperature": {"value": 220},
        "material_print_temperature": {"value": 220},
        "material_print_temperature_layer_0": {"value": 220},
        "material_initial_print_temperature": {"value": 220},
        "material_final_print_temperature": {"value": 220},
        "default_material_bed_temperature": {"value": 50},
        "material_bed_temperature": {"value": 50},
        "material_flow": {"value": 100},
        "retraction_enable": {"value": true },
        "retract_at_layer_change": {"value": false },
        "retraction_amount": {"value": 5},
        "retraction_speed": {"value": 45},
        "retraction_extra_prime_amount": {"value": 0},
        "retraction_min_travel": {"value": 0.8},
        "retraction_count_max": {"value": 90},
        "retraction_extrusion_window": {"value": 5},
        "limit_support_retractions": {"value": true },
        "switch_extruder_retraction_amount": {"value": 16},
        "switch_extruder_retraction_speeds": {"value": 20},
        "speed_print": {"value": 50},
        "speed_travel": {"value": 150},
        "speed_layer_0": {"value": 10},
        "speed_travel_layer_0": {"value": 50},
        "speed_slowdown_layers": {"value": 2},
        "acceleration_enabled": {"value": false },
        "acceleration_roofing":  {"value": 3000 },
        "jerk_enabled":  {"value": false },
        "retraction_combing":  {"value": "'infill'" },
        "travel_retract_before_outer_wall": {"value": false },
        "travel_avoid_other_parts": {"value": true },
        "retraction_hop_enabled": {"value": false },
        "cool_fan_enabled": {"value": true },
        "cool_fan_speed": {"value": 100},
        "cool_fan_speed_0": {"value": 0},
        "cool_fan_full_at_height":  {"value": 0.32 },
        "cool_lift_head":  {"value": false },
        "support_enable":  {"value": true },
        "support_type": {"value": "'everywhere'" },
        "support_angle":  {"value": "50"},
        "support_pattern":  {"value": "'grid'"},
        "support_wall_count": {"value": 0},
        "zig_zaggify_support":  {"value": false },
        "support_infill_rate": {"value": "15 if support_enable else 0"},
        "support_brim_enable":  {"value": true },
        "support_brim_line_count": {"value": 5},
        "support_z_distance": {"value": 0.2},
        "support_xy_distance": {"value": 0.7},
        "support_xy_distance_overhang": {"value": 0.2},
        "support_bottom_stair_step_height": {"value": 0.3},
        "support_bottom_stair_step_width": {"value": 5.0},
        "support_join_distance": {"value": 2.0},
        "support_offset": {"value": 0.2},
        "gradual_support_infill_steps": {"value": 0},
        "support_roof_enable": {"value": true },
        "support_bottom_enable":  {"value": false },
        "support_roof_height":  {"value": 0.45},
        "support_roof_density":  {"value": 45},
        "support_roof_pattern": {"value": "'lines'" },
        "support_fan_enable": {"value": false },
        "support_use_towers":  {"value": true },
        "support_tower_diameter":  {"value": 3},
        "support_tower_roof_angle":  {"value": "65"},
        "adhesion_type":  {"value": "'skirt'"},
        "skirt_line_count": {"value": 2},
        "skirt_gap":  {"value": 3},
        "meshfix_union_all":  {"value": true },
        "meshfix_union_all_remove_holes":  {"value": false },
        "meshfix_extensive_stitching":  {"value": false },
        "meshfix_keep_open_polygons":  {"value": false },
        "multiple_mesh_overlap": {"value": "0.16"},
        "carve_multiple_volumes": {"value": false }       
    }
}