{
    "version": 2,
    "name": "TinyBoy Fabrikator Mini 1.5",
    "inherits": "fdmprinter",
    "metadata": { 
        "visible": true,
        "author": "Reiner Buehl",
        "manufacturer": "TinyBoy",
        "file_formats": "text/x-gcode",
        "platform": "tinyboy_fabrikator15.stl",
        "platform_offset": [-95, -3, -46],
        "has_materials": true,
        "preferred_material": "generic_pla_175",
        "has_machine_quality": true,
        "preferred_quality_type": "normal",
        "machine_extruder_trains":
        {
            "0": "tinyboy_fabrikator15_extruder_0"
        }
    },

    "overrides": {
        "machine_name": { "default_value": "Fabrikator Mini 1.5" },
        "machine_width": { "default_value": 80 },
        "machine_depth": { "default_value": 80 },
        "machine_height": { "default_value": 80 },
        "machine_head_with_fans_polygon": { "default_value": [
                [-10, 35],
                [-10, -18],
                [28, -18],
                [28, 35]
            ]
        },
        "gantry_height": { "value": 45 },
        "machine_center_is_zero": { "default_value": false },
         "machine_start_gcode": {
            "default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28 X0 Y0  ;move X/Y to min endstops\nG28 Z0     ;move Z to min endstops\nG1 X0.0 Y0.0 Z15.0 F6000 ;move the printhead up 15mm\nG92 E0                  ;zero the extruded length\nM104 S{material_print_temperature} ;set extruder temperature\nM105\nM109 S{material_print_temperature} ;wait for extruder temperature\nG1 F200 E30              ;extrude 30mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F6000\n;Put printing message on LCD screen\nM117 Printing..."
        },
        "machine_end_gcode": {
            "default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n;{jobname}"
        }
    }
}