# Cura # Copyright (C) 2022 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # Ultimaker , 2022. # msgid "" msgstr "" "Project-Id-Version: Cura 5.1\n" "Report-Msgid-Bugs-To: plugins@ultimaker.com\n" "POT-Creation-Date: 2022-06-21 12:50+0200\n" "PO-Revision-Date: 2022-07-07 19:34+0200\n" "Last-Translator: Miroslav Šustek \n" "Language-Team: DenyCZ \n" "Language: cs_CZ\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n>=2 && n<=4 ? 1 : 2);\n" "X-Generator: Poedit 3.1\n" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 msgctxt "@label" msgid "Unknown" msgstr "Neznámý" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 msgctxt "@label" msgid "The printer(s) below cannot be connected because they are part of a group" msgstr "Níže uvedené tiskárny nelze připojit, protože jsou součástí skupiny" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 msgctxt "@label" msgid "Available networked printers" msgstr "Dostupné síťové tiskárny" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:219 msgctxt "@menuitem" msgid "Not overridden" msgstr "Nepřepsáno" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 msgctxt "@label" msgid "Connected printers" msgstr "Připojené tiskárny" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 msgctxt "@label" msgid "Preset printers" msgstr "Přednastavené tiskárny" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:143 #, python-brace-format msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "Doopravdy chcete odstranit {0}? Toto nelze vrátit zpět!" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:61 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 msgctxt "@label" msgid "Default" msgstr "Výchozí" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:65 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "Vizuální" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:66 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "Vizuální profil je navržen pro tisk vizuálních prototypů a modelů s cílem vysoké vizuální a povrchové kvality." #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:70 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "Technika" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:71 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "Inženýrský profil je navržen pro tisk funkčních prototypů a koncových částí s cílem lepší přesnosti a bližších tolerancí." #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:75 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "Návrh" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:76 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "Návrhový profil je navržen pro tisk počátečních prototypů a ověření koncepce s cílem podstatného zkrácení doby tisku." #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:232 msgctxt "@label" msgid "Custom Material" msgstr "Vlastní materiál" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:233 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340 msgctxt "@label" msgid "Custom" msgstr "Vlastní" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:391 msgctxt "@label" msgid "Custom profiles" msgstr "Vlastní profily" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:426 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "Všechny podporované typy ({0})" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:427 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "Všechny soubory (*)" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualitySettingsModel.py:182 msgctxt "@info:status" msgid "Calculated" msgstr "Vypočítáno" #: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:190 msgctxt "@info:title" msgid "Login failed" msgstr "Přihlášení selhalo" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "Hledám nové umístění pro objekt" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" msgid "Finding Location" msgstr "Hledám umístění" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:99 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "Nemohu najít lokaci na podložce pro všechny objekty" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" msgid "Can't Find Location" msgstr "Nemohu najít umístění" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:115 msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "Nelze vytvořit archiv ze složky s uživatelskými daty: {}" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122 #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 msgctxt "@info:title" msgid "Backup" msgstr "Záloha" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup without having proper data or meta data." msgstr "Pokusil se obnovit zálohu Cura bez nutnosti správných dat nebo metadat." #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:145 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup that is higher than the current version." msgstr "Pokusil se obnovit zálohu Cura, která je vyšší než aktuální verze." #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:158 msgctxt "@info:backup_failed" msgid "The following error occurred while trying to restore a Cura backup:" msgstr "Během obnovení zálohy Cura se vyskytly následující chyby:" #: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100 msgctxt "@info:status" msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." msgstr "Výška podložky byla snížena kvůli hodnotě nastavení „Sekvence tisku“, aby se zabránilo kolizi rámu s tištěnými modely." #: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:103 msgctxt "@info:title" msgid "Build Volume" msgstr "Podložka" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "Cura nelze spustit" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "

Oops, Ultimaker Cura has encountered something that doesn't seem right.

\n" "

We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.

\n" "

Please send us this Crash Report to fix the problem.

\n" " " msgstr "" "

Jejda, Ultimaker Cura narazil na něco, co se nezdá být v pořádku.

\n" "                    

Během spouštění jsme zaznamenali neodstranitelnou chybu. Bylo to pravděpodobně způsobeno některými nesprávnými konfiguračními soubory. Doporučujeme zálohovat a resetovat vaši konfiguraci.

\n" "                    

Zálohy najdete v konfigurační složce.

\n" "                    

Za účelem vyřešení problému nám prosím pošlete tento záznam pádu.

\n" " " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to Ultimaker" msgstr "Poslat záznam o pádu do Ultimakeru" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "Zobrazit podrobný záznam pádu" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "Zobrazit složku s konfigurací" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "Zálohovat a resetovat konfiguraci" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "Záznam pádu" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" "

V Cuře došlo k závažné chybě. Zašlete nám prosím tento záznam pádu k vyřešení problému

\n" "            

Použijte tlačítko „Odeslat zprávu“ k automatickému odeslání hlášení o chybě na naše servery

\n" " " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "Systémové informace" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "Neznámý" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "Verze Cura" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "Jazyk Cura" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "Jazyk operačního systému" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "Platforma" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "Verze Qt" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "Verze PyQt" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "OpenGL" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized" msgstr "Neinicializováno" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "
  • OpenGL Version: {version}
    • " msgstr "
  • Verze OpenGL: {version}
    • " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "
  • OpenGL Vendor: {vendor}
    • " msgstr "
  • OpenGL Vendor: {vendor}
    • " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "
  • OpenGL Renderer: {renderer}
    • " msgstr "
  • OpenGL Renderer: {renderer}
    • " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:304 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "Stopování chyby" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:390 msgctxt "@title:groupbox" msgid "Logs" msgstr "Protokoly" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:418 msgctxt "@action:button" msgid "Send report" msgstr "Odeslat záznam" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:531 msgctxt "@info:progress" msgid "Loading machines..." msgstr "Načítám zařízení..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:538 msgctxt "@info:progress" msgid "Setting up preferences..." msgstr "Nastavuji preference..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:683 msgctxt "@info:progress" msgid "Initializing Active Machine..." msgstr "Inicializuji aktivní zařízení..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:823 msgctxt "@info:progress" msgid "Initializing machine manager..." msgstr "Inicializuji správce zařízení..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:837 msgctxt "@info:progress" msgid "Initializing build volume..." msgstr "Inicializuji prostor podložky..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:905 msgctxt "@info:progress" msgid "Setting up scene..." msgstr "Připravuji scénu..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:941 msgctxt "@info:progress" msgid "Loading interface..." msgstr "Načítám rozhraní..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:946 msgctxt "@info:progress" msgid "Initializing engine..." msgstr "Inicializuji engine..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1272 #, python-format msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." msgid "%(width).1f x %(depth).1f x %(height).1f mm" msgstr "%(width).1f x %(depth).1f x %(height).1f mm" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1798 #, python-brace-format msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "Současně lze načíst pouze jeden soubor G-kódu. Přeskočen import {0}" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1800 #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:217 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189 msgctxt "@info:title" msgid "Warning" msgstr "Varování" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1810 #, python-brace-format msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "Nelze otevřít žádný jiný soubor, když se načítá G kód. Přeskočen import {0}" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1812 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:166 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173 msgctxt "@info:title" msgid "Error" msgstr "Chyba" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30 msgctxt "@info:status" msgid "Multiplying and placing objects" msgstr "Násobím a rozmisťuji objekty" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:32 msgctxt "@info:title" msgid "Placing Objects" msgstr "Umisťuji objekty" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:100 msgctxt "@info:title" msgid "Placing Object" msgstr "Umisťuji objekt" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:89 msgctxt "@message" msgid "Could not read response." msgstr "Nelze přečíst odpověď." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75 msgctxt "@message" msgid "The provided state is not correct." msgstr "Poskytnutý stav není správný." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Vypršel časový limit při autentizaci se serverem s účty." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Při autorizaci této aplikace zadejte požadovaná oprávnění." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Při pokusu o přihlášení se stalo něco neočekávaného, zkuste to znovu." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:216 msgctxt "@info" msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." msgstr "Nepodařilo se mi spustit nový proces přihlášení. Zkontrolujte, zda nějaký jiný již neběží." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:277 msgctxt "@info" msgid "Unable to reach the Ultimaker account server." msgstr "Nelze se dostat na server účtu Ultimaker." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:278 msgctxt "@info:title" msgid "Log-in failed" msgstr "Přihlášení selhalo" #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104 msgctxt "@text:error" msgid "Failed to create archive of materials to sync with printers." msgstr "Nepodařilo se vytvořit archiv s materiály pro synchronizaci s tiskárnami." #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165 msgctxt "@text:error" msgid "Failed to load the archive of materials to sync it with printers." msgstr "Nepodařilo se načíst archiv s materiály pro synchronizaci s tiskárnami." #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143 msgctxt "@text:error" msgid "The response from Digital Factory appears to be corrupted." msgstr "Odpověď z Digital Factory se zdá být poškozená." #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155 msgctxt "@text:error" msgid "The response from Digital Factory is missing important information." msgstr "Odpověď z Digital Factory postrádá důležité informace." #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218 msgctxt "@text:error" msgid "Failed to connect to Digital Factory to sync materials with some of the printers." msgstr "Nepodařilo se připojit k Digital Factory pro synchronizaci materiálů s některými z tiskáren." #: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232 msgctxt "@text:error" msgid "Failed to connect to Digital Factory." msgstr "Nepodařilo se připojit k Digital Factory." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:207 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:140 msgctxt "@title:window" msgid "File Already Exists" msgstr "Soubor již existuje" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:208 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:141 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "Soubor {0} již existuje. Opravdu jej chcete přepsat?" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:459 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:462 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "Špatná cesta k souboru:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" msgstr "Nepodařilo se exportovat profil do {0}: {1}" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:163 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." msgstr "Export profilu do {0} se nezdařil: Zapisovací zásuvný modul ohlásil chybu." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:171 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" msgstr "Exportován profil do {0}" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:173 msgctxt "@info:title" msgid "Export succeeded" msgstr "Export úspěšný" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:205 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}: {1}" msgstr "Nepodařilo se importovat profil z {0}: {1}" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:209 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Can't import profile from {0} before a printer is added." msgstr "Nemohu přidat profil z {0} před tím, než je přidána tiskárna." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:224 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "No custom profile to import in file {0}" msgstr "V souboru {0} není k dispozici žádný vlastní profil" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:228 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "Import profilu z {0} se nezdařil:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:252 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:262 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." msgstr "Tento profil {0} obsahuje nesprávná data, nemohl je importovat." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:355 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to import profile from {0}:" msgstr "Import profilu z {0} se nezdařil:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:359 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "Úspěšně importován profil {0}." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:366 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "Soubor {0} neobsahuje žádný platný profil." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:369 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "Profil {0} má neznámý typ souboru nebo je poškozen." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443 msgctxt "@label" msgid "Custom profile" msgstr "Vlastní profil" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:459 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "V profilu chybí typ kvality." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463 msgctxt "@info:status" msgid "There is no active printer yet." msgstr "Zatím neexistuje aktivní tiskárna." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:469 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "Nepovedlo se přidat profil." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:483 #, python-brace-format msgctxt "@info:status" msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "Typ kvality '{0}' není kompatibilní s definicí '{1}' aktivního zařízení." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:488 #, python-brace-format msgctxt "@info:status" msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." msgstr "Varování: Profil není viditelný, protože typ kvality '{0}' není dostupný pro aktuální konfiguraci. Přepněte na kombinaci materiálu a trysky, která může být použita s tímto typem kvality." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "Nepodporovaný" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "Výchozí" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:219 msgctxt "@label" msgid "Nozzle" msgstr "Tryska" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:857 msgctxt "@info:message Followed by a list of settings." msgid "Settings have been changed to match the current availability of extruders:" msgstr "Nastavení byla změněna, aby odpovídala aktuální dostupnosti extruderů:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:858 msgctxt "@info:title" msgid "Settings updated" msgstr "Nastavení aktualizováno" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1480 msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "Extruder(y) zakázány" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61 msgctxt "@action:button" msgid "Add" msgstr "Přidat" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:290 msgctxt "@action:button" msgid "Finish" msgstr "Dokončit" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:508 #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:323 #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:147 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:139 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:291 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:74 msgctxt "@action:button" msgid "Cancel" msgstr "Zrušit" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" msgstr "Skupina #{group_nr}" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85 msgctxt "@tooltip" msgid "Outer Wall" msgstr "Vnější stěna" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86 msgctxt "@tooltip" msgid "Inner Walls" msgstr "Vnitřní stěna" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Skin" msgstr "Skin" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Infill" msgstr "Výplň" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Support Infill" msgstr "Výplň podpor" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Support Interface" msgstr "Rozhraní podpor" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Support" msgstr "Podpora" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Skirt" msgstr "Límec" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Prime Tower" msgstr "Hlavní věž" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94 msgctxt "@tooltip" msgid "Travel" msgstr "Pohyb" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:95 msgctxt "@tooltip" msgid "Retractions" msgstr "Retrakce" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:96 msgctxt "@tooltip" msgid "Other" msgstr "Jiné" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:63 msgctxt "@text:window" msgid "The release notes could not be opened." msgstr "Poznámky k vydání nelze otevřít." #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:57 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:277 msgctxt "@action:button" msgid "Next" msgstr "Další" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:286 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:67 msgctxt "@action:button" msgid "Skip" msgstr "Přeskočit" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:72 #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175 #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135 #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:443 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:186 msgctxt "@action:button" msgid "Close" msgstr "Zavřít" #: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 msgctxt "@action:button" msgid "Please sync the material profiles with your printers before starting to print." msgstr "Prosím synchronizujte před začátkem tisku materiálové profily s vašimi tiskárnami." #: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 msgctxt "@action:button" msgid "New materials installed" msgstr "Byly nainstalovány nové materiály" #: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 msgctxt "@action:button" msgid "Sync materials" msgstr "Synchronizovat materiály" #: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:397 #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:80 msgctxt "@action:button" msgid "Learn more" msgstr "Zjistit více" #: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135 msgctxt "@message:text" msgid "Could not save material archive to {}:" msgstr "Nelze uložit archiv s materiálem do {}:" #: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136 msgctxt "@message:title" msgid "Failed to save material archive" msgstr "Nepodařilo se uložit archiv s materiálem" #: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188 msgctxt "@text" msgid "Unknown error." msgstr "Neznámá chyba." #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "Asistent 3D modelu" #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:97 #, python-brace-format msgctxt "@info:status" msgid "" "

    One or more 3D models may not print optimally due to the model size and material configuration:

    \n" "

    {model_names}

    \n" "

    Find out how to ensure the best possible print quality and reliability.

    \n" "

    View print quality guide

    " msgstr "" "

    Jeden nebo více 3D modelů se nemusí tisknout optimálně kvůli velikosti modelu a konfiguraci materiálu:

    \n" "

    {model_names}

    \n" "

    Zjistěte, jak zajistit nejlepší možnou kvalitu a spolehlivost tisku.

    \n" "

    Zobrazit průvodce kvalitou tisku

    " #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Project file {0} contains an unknown machine type {1}. Cannot import the machine. Models will be imported instead." msgstr "Projektový soubor {0} obsahuje neznámý typ zařízení {1}. Nelze importovat zařízení. Místo toho budou importovány modely." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:548 msgctxt "@info:title" msgid "Open Project File" msgstr "Otevřít soubor s projektem" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "Soubor projektu {0} je neočekávaně nedostupný: {1}." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:659 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "Nepovedlo se otevřít soubor projektu" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:658 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is corrupt: {1}." msgstr "Soubor projektu {0} je poškozený: {1}." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:711 #, python-brace-format msgctxt "@info:error Don't translate the XML tag !" msgid "Project file {0} is made using profiles that are unknown to this version of Ultimaker Cura." msgstr "Soubor projektu {0} je vytvořený profily, které jsou této verzi Ultimaker Cura neznámé." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:212 msgctxt "@title:tab" msgid "Recommended" msgstr "Doporučeno" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:214 msgctxt "@title:tab" msgid "Custom" msgstr "Vlastní" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:390 msgctxt "@info:status" msgid "The material used in this project relies on some material definitions not available in Cura, this might produce undesirable print results. We highly recommend installing the full material package from the Marketplace." msgstr "Materiál použitý v tomto projektu závisí na jiných definicích materiálů, které nejsou dostupné v Cuře. To může způsobit nečekané problémy při tisku. Důrazně doporučujeme nainstalovat kompletní balíček materiálů z Obchodu." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:392 msgctxt "@info:title" msgid "Material profiles not installed" msgstr "Materiálové profily nejsou nainstalovány" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:405 msgctxt "@action:button" msgid "Install Materials" msgstr "Instalovat materiály" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "Soubor 3MF" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "Plugin 3MF Writer je poškozen." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37 msgctxt "@error" msgid "There is no workspace yet to write. Please add a printer first." msgstr "Zatím neexistuje žádný pracovní prostor. Nejprve prosím přidejte tiskárnu." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "Nemáte oprávnění zapisovat do tohoto pracovního prostoru." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101 msgctxt "@error:zip" msgid "The operating system does not allow saving a project file to this location or with this file name." msgstr "Operační systém nepovoluje uložit soubor s projektem do tohoto umístění nebo pod tímto názvem." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:238 msgctxt "@error:zip" msgid "Error writing 3mf file." msgstr "Chyba při zápisu 3mf file." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:282 #, python-brace-format msgctxt "@error:material" msgid "It was not possible to store material package information in project file: {material}. This project may not open correctly on other systems." msgstr "Nepodařilo se uložit informace o balíčku materiálů v souboru projektu: {material}. Tento projekt se nemusí otevřít správně na jiných systémech." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:283 msgctxt "@info:title" msgid "Failed to save material package information" msgstr "Nepodařilo se uložit informace o balíčku materiálů" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "Soubor 3MF" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:36 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "Soubor Cura Project 3MF" #: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" msgid "AMF File" msgstr "Soubor AMF" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25 msgctxt "@info:title" msgid "Backups" msgstr "Zálohy" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error while uploading your backup." msgstr "Nastala chyba při nahrávání vaší zálohy." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46 msgctxt "@info:backup_status" msgid "Creating your backup..." msgstr "Vytvářím zálohu..." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55 msgctxt "@info:backup_status" msgid "There was an error while creating your backup." msgstr "Nastala chyba při vytváření zálohy." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59 msgctxt "@info:backup_status" msgid "Uploading your backup..." msgstr "Nahrávám vaši zálohu..." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69 msgctxt "@info:backup_status" msgid "Your backup has finished uploading." msgstr "Vaše záloha byla úspěšně nahrána." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103 msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "Záloha překračuje maximální povolenou velikost soubor." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "Nastala chyba při pokusu obnovit vaši zálohu." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69 msgctxt "@item:inmenu" msgid "Manage backups" msgstr "Spravovat zálohy" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." msgstr "Slicování selhalo na neočekávané chybě. Zvažte, prosím, nahlášení chyby v našem issue trackeru." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message:title" msgid "Slicing failed" msgstr "Slicování selhalo" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 msgctxt "@message:button" msgid "Report a bug" msgstr "Nahlásit chybu" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168 msgctxt "@message:description" msgid "Report a bug on Ultimaker Cura's issue tracker." msgstr "Nahlásit chybu v Ultimaker Cura issue trackeru." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:400 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Nelze slicovat s aktuálním materiálem, protože je nekompatibilní s vybraným strojem nebo konfigurací." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:401 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:434 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:461 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:473 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:485 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:498 msgctxt "@info:title" msgid "Unable to slice" msgstr "Nelze slicovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:433 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice with the current settings. The following settings have errors: {0}" msgstr "S aktuálním nastavením nelze slicovat. Následující nastavení obsahuje chyby: {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:460 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" msgstr "Nelze slicovat kvůli některým nastavení jednotlivých modelů. Následující nastavení obsahuje chyby na jednom nebo více modelech: {error_labels}" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:472 msgctxt "@info:status" msgid "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "Nelze slicovat, protože hlavní věž nebo primární pozice jsou neplatné." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:484 #, python-format msgctxt "@info:status" msgid "Unable to slice because there are objects associated with disabled Extruder %s." msgstr "Nelze slicovat, protože jsou zde objekty asociované k zakázanému extruder %s." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:494 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" "- Fit within the build volume\n" "- Are assigned to an enabled extruder\n" "- Are not all set as modifier meshes" msgstr "" "Zkontrolujte nastavení a zda vaše modely:\n" "- Vejdou se na pracovní prostor\n" "- Jsou přiřazeny k povolenému extruderu\n" "- Nejsou nastavené jako modifikační sítě" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Zpracovávám vrstvy" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261 msgctxt "@info:title" msgid "Information" msgstr "Informace" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Cura profil" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 msgctxt "@info" msgid "Could not access update information." msgstr "Nemohu načíst informace o aktualizaci." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." msgstr "K dispozici mohou být nové funkce nebo opravy chyb pro zařízení {machine_name}! Pokud jste tak už neučinili, je doporučeno zaktualizovat firmware vaší tiskárny na verzi {latest_version}." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" msgstr "Nový stabilní firmware je k dispozici pro %s" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" msgid "How to update" msgstr "Jak aktualizovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 msgctxt "@action" msgid "Update Firmware" msgstr "Aktualizovat firmware" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "Kompresovaný soubor G kódu" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "GCodeGzWriter nepodporuje textový mód." #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "Soubor G-kódu" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:350 msgctxt "@info:status" msgid "Parsing G-code" msgstr "Zpracovávám G kód" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:352 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:506 msgctxt "@info:title" msgid "G-code Details" msgstr "Podrobnosti G kódu" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:504 msgctxt "@info:generic" msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." msgstr "Před odesláním souboru se ujistěte, že je g-kód vhodný pro vaši tiskárnu a konfiguraci tiskárny. Reprezentace g-kódu nemusí být přesná." #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "G File" msgstr "G soubor" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74 msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "GCodeWriter nepodporuje netextový mód." #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "Před exportem prosím připravte G-kód." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "Obrázek JPG" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "Obrázek JPEG" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "Obrázek PNG" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "Obrázek BMP" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "Obrázek GIF" #: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "Profily Cura 15.04" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 msgctxt "@action" msgid "Machine Settings" msgstr "Nastavení zařízení" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:144 msgctxt "@info:generic" msgid "Do you want to sync material and software packages with your account?" msgstr "Chcete synchronizovat materiálové a softwarové balíčky s vaším účtem?" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:145 #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:95 msgctxt "@info:title" msgid "Changes detected from your Ultimaker account" msgstr "Zjištěny změny z vašeho účtu Ultimaker" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:147 msgctxt "@action:button" msgid "Sync" msgstr "Synchronizovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:91 msgctxt "@info:generic" msgid "Syncing..." msgstr "Synchronizuji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:12 #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:79 msgctxt "@button" msgid "Decline" msgstr "Odmítnout" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:13 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53 msgctxt "@button" msgid "Agree" msgstr "Přijmout" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:77 msgctxt "@title:window" msgid "Plugin License Agreement" msgstr "Licenční ujednání zásuvného modulu" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicensePresenter.py:42 msgctxt "@button" msgid "Decline and remove from account" msgstr "Odmítnout a odstranit z účtu" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22 msgctxt "@info:generic" msgid "You need to quit and restart {} before changes have effect." msgstr "Než se změny projeví, musíte ukončit a restartovat {}." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/SyncOrchestrator.py:79 msgctxt "@info:generic" msgid "{} plugins failed to download" msgstr "Nepovedlo se stáhnout {} zásuvných modulů" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:28 msgctxt "@label" msgid "Installed Plugins" msgstr "Nainstalované moduly" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:29 msgctxt "@label" msgid "Installed Materials" msgstr "Nainstalované materiály" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:33 msgctxt "@label" msgid "Bundled Plugins" msgstr "Přibalené moduly" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:34 msgctxt "@label" msgid "Bundled Materials" msgstr "Přibalené materiály" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:43 msgctxt "@label:property" msgid "Unknown Package" msgstr "Neznámý balíček" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:66 msgctxt "@label:property" msgid "Unknown Author" msgstr "Neznámý autor" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:117 msgctxt "@info:error" msgid "Could not interpret the server's response." msgstr "Nelze přečíst odpověď serveru." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:148 msgctxt "@info:error" msgid "Could not reach Marketplace." msgstr "Nelze se připojit k Obchodu." #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" msgid "Monitor" msgstr "Monitorování" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" msgid "Per Model Settings" msgstr "Nastavení pro každý model" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15 msgctxt "@info:tooltip" msgid "Configure Per Model Settings" msgstr "Konfigurovat nastavení pro každý model" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 msgctxt "@item:inmenu" msgid "Post Processing" msgstr "Post Processing" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 msgctxt "@item:inmenu" msgid "Modify G-Code" msgstr "Modifikovat G kód" #: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" msgstr "Příprava" #: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" msgid "Preview" msgstr "Náhled" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "Uložit na vyměnitelný disk" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "Uložit na vyměnitelný disk {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "Nejsou k dispozici žádné formáty souborů pro zápis!" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" msgstr "Ukládám na vyměnitelný disk {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110 msgctxt "@info:title" msgid "Saving" msgstr "Ukládám" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" msgstr "Nemohu uložit na {0}: {1}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Při pokusu o zápis do zařízení {device} nebyl nalezen název souboru." #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "Nelze uložit na vyměnitelnou jednotku {0}: {1}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "Ukládám na vyměnitelnou jednotku {0} jako {1}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 msgctxt "@info:title" msgid "File Saved" msgstr "Soubor uložen" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 msgctxt "@action:button" msgid "Eject" msgstr "Vysunout" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "Vysunout vyměnitelnou jednotku {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "Vysunuto {0}. Nyní můžete bezpečně vyjmout jednotku." #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "Bezpečně vysunout hardware" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "Nepodařilo se vysunout {0}. Jednotku může používat jiný program." #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "Vyměnitelná jednotka" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:129 msgctxt "@info:status" msgid "Cura does not accurately display layers when Wire Printing is enabled." msgstr "Když je aktivován síťový tisk, Cura přesně nezobrazuje vrstvy." #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:130 msgctxt "@info:title" msgid "Simulation View" msgstr "Pohled simulace" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:133 msgctxt "@info:status" msgid "Nothing is shown because you need to slice first." msgstr "Nic není zobrazeno, nejdříve musíte slicovat." #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:134 msgctxt "@info:title" msgid "No layers to show" msgstr "Žádné vrstvy k zobrazení" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136 #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "Znovu nezobrazovat tuto zprávu" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15 msgctxt "@item:inlistbox" msgid "Layer view" msgstr "Pohled vrstev" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." msgstr "Nelze načíst ukázkový datový soubor." #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71 msgctxt "@info:status" msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." msgstr "Zvýrazněné oblasti označují chybějící nebo vedlejší povrchy. Opravte váš model a otevřete jej znovu." #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73 msgctxt "@info:title" msgid "Model Errors" msgstr "Chyby modelu" #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" msgstr "Pevný pohled" #: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12 msgctxt "@label" msgid "Support Blocker" msgstr "Blokovač podpor" #: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" msgid "Create a volume in which supports are not printed." msgstr "Vytvořit prostor ve kterém nejsou tištěny podpory." #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15 msgctxt "@item:inlistbox 'Open' is part of the name of this file format." msgid "Open Compressed Triangle Mesh" msgstr "Open Compressed Triangle Mesh" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" msgid "COLLADA Digital Asset Exchange" msgstr "COLLADA Digital Asset Exchange" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" msgid "glTF Binary" msgstr "gITF binární soubor" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27 msgctxt "@item:inlistbox" msgid "glTF Embedded JSON" msgstr "glTF Embedded JSON" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36 msgctxt "@item:inlistbox" msgid "Stanford Triangle Format" msgstr "Stanford Triangle Format" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40 msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "Kompresovaný COLLADA Digital Asset Exchenge" #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "Ultimaker Format Package" msgstr "Balíček ve formátu Ultimaker" #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:159 msgctxt "@info:error" msgid "Can't write to UFP file:" msgstr "Nemohu zapsat do UFP souboru:" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 msgctxt "@action" msgid "Level build plate" msgstr "Vyrovnat podložku" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" msgid "Select upgrades" msgstr "Vybrat vylepšení" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 msgctxt "@action:button" msgid "Print via cloud" msgstr "Tisknout přes cloud" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155 msgctxt "@properties:tooltip" msgid "Print via cloud" msgstr "Tisknout přes cloud" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156 msgctxt "@info:status" msgid "Connected via cloud" msgstr "Připojen přes cloud" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 msgctxt "@action:button" msgid "Monitor print" msgstr "Sledovat tisk" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" msgstr "Sledujte tisk v Ultimaker Digital Factory" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 #, python-brace-format msgctxt "@error:send" msgid "Unknown error code when uploading print job: {0}" msgstr "Při nahrávání tiskové úlohy došlo k chybě s neznámým kódem: {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "Z vašeho Ultimaker účtu byla detekována nová tiskárna" msgstr[1] "Z vašeho Ultimaker účtu byly detekovány nové tiskárny" msgstr[2] "Z vašeho Ultimaker účtu byly detekovány nové tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:242 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "Přidávám tiskárnu {name} ({model}) z vašeho účtu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:261 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" msgid_plural "... and {0} others" msgstr[0] "... a {0} další" msgstr[1] "... a {0} další" msgstr[2] "... a {0} dalších" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:266 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "Tiskárny přidané z Digital Factory:" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:334 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "Pro tuto tiskárnu není připojení přes cloud dostupné" msgstr[1] "Pro tyto tiskárny není připojení přes cloud dostupné" msgstr[2] "Pro tyto tiskárny není připojení přes cloud dostupné" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:343 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "Tato tiskárna není napojena na Digital Factory:" msgstr[1] "Tyto tiskárny nejsou napojeny na Digital Factory:" msgstr[2] "Tyto tiskárny nejsou napojeny na Digital Factory:" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:348 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:440 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "Ultimaker Digital Factory" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:352 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "Chcete-li navázat spojení, navštivte {website_link}" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:356 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "Zachovat konfiguraci tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:361 msgctxt "@action:button" msgid "Remove printers" msgstr "Odstranit tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:442 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "Tiskárna {printer_name} bude odebrána až do další synchronizace účtu." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:443 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "Chcete-li tiskárnu {printer_name} trvale odebrat, navštivte {digital_factory_link}" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:444 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "Opravdu chcete tiskárnu {printer_name} dočasně odebrat?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481 msgctxt "@title:window" msgid "Remove printers?" msgstr "Odstranit tiskárny?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484 #, python-brace-format msgctxt "@label" msgid "" "You are about to remove {0} printer from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr[0] "" "Chystáte se odebrat {0} tiskárnu z Cury. Tuto akci nelze vrátit zpět.\n" "Doopravdy chcete pokračovat?" msgstr[1] "" "Chystáte se odebrat {0} tiskárny z Cury. Tuto akci nelze vrátit zpět.\n" "Doopravdy chcete pokračovat?" msgstr[2] "" "Chystáte se odebrat {0} tiskáren z Cury. Tuto akci nelze vrátit zpět.\n" "Doopravdy chcete pokračovat?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:489 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr "" "Chystáte se odebrat všechny tiskárny z Cury. Tuto akci nelze vrátit zpět.\n" "Doopravdy chcete pokračovat?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25 #, python-brace-format msgctxt "@info:status" msgid "" "Your printer {printer_name} could be connected via cloud.\n" " Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory" msgstr "" "Vaše tiskárna {printer_name} může být připojena přes cloud.\n" " Spravujte vaši tiskovou frontu a sledujte tisk odkudkoliv připojením vaší tiskárny k Digital Factory" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26 msgctxt "@info:title" msgid "Are you ready for cloud printing?" msgstr "Jste připraveni na tisk přes cloud?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30 msgctxt "@action" msgid "Get started" msgstr "Začínáme" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31 msgctxt "@action" msgid "Learn more" msgstr "Zjistit více" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 msgctxt "@info:status" msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." msgstr "Pokoušíte se připojit k tiskárně, na které není spuštěna aplikace Ultimaker Connect. Aktualizujte tiskárnu na nejnovější firmware." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" msgid "Update your printer" msgstr "Aktualizujte vaší tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format msgctxt "@info:status" msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." msgstr "Cura zjistil materiálové profily, které ještě nebyly nainstalovány na hostitelské tiskárně skupiny {0}." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 msgctxt "@info:title" msgid "Sending materials to printer" msgstr "Odesílání materiálů do tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." msgstr "Pokoušíte se připojit k {0}, ale není hostitelem skupiny. Webovou stránku můžete navštívit a nakonfigurovat ji jako skupinového hostitele." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "Není hostem skupiny" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36 msgctxt "@action" msgid "Configure group" msgstr "Konfigurovat skupinu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "Počkejte, až bude odeslána aktuální úloha." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "Chyba tisku" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "Nemohu nahrát data do tiskárny." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "Chyba sítě" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" msgid "Sending Print Job" msgstr "Odesílám tiskovou úlohu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" msgid "Uploading print job to printer." msgstr "Nahrávám tiskovou úlohu do tiskárny." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "Fronta tiskových úloh je plná. Tiskárna nemůže přijmout další úlohu." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "Fronta je plná" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "Tisková úloha byla úspěšně odeslána do tiskárny." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "Data poslána" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "Tisk přes síť" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "Tisk přes síť" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 msgctxt "@info:status" msgid "Connected over the network" msgstr "Připojeno přes síť" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 msgctxt "@action" msgid "Connect via Network" msgstr "Připojit přes síť" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" msgid "tomorrow" msgstr "zítra" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 msgctxt "@info:status" msgid "today" msgstr "dnes" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 msgctxt "@item:inmenu" msgid "USB printing" msgstr "USB tisk" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print via USB" msgstr "Tisk přes USB" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 msgctxt "@info:tooltip" msgid "Print via USB" msgstr "Tisk přes USB" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 msgctxt "@info:status" msgid "Connected via USB" msgstr "Připojeno přes USB" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 msgctxt "@label" msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" msgstr "Probíhá tisk přes USB, uzavření Cura tento tisk zastaví. Jsi si jistá?" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135 msgctxt "@message" msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." msgstr "Tisk stále probíhá. Cura nemůže spustit další tisk přes USB, dokud není předchozí tisk dokončen." #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136 msgctxt "@message" msgid "Print in Progress" msgstr "Probíhá tisk" #: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" msgid "X3D File" msgstr "Soubor X3D" #: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" msgstr "Rentgenový pohled" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:15 msgctxt "@title:window" msgid "Open Project" msgstr "Otevřit projekt" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:63 msgctxt "@action:ComboBox Update/override existing profile" msgid "Update existing" msgstr "Aktualizovat existující" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:64 msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "Vytvořit nový" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:82 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:59 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "Souhrn - Projekt Cura" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108 msgctxt "@info:tooltip" msgid "How should the conflict in the machine be resolved?" msgstr "Jak by měl být problém v zařízení vyřešen?" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:164 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:95 msgctxt "@action:label" msgid "Printer settings" msgstr "Nastavení tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:175 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:104 msgctxt "@action:label" msgid "Type" msgstr "Typ" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:192 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119 msgctxt "@action:label" msgid "Printer Group" msgstr "Skupina tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:217 msgctxt "@info:tooltip" msgid "How should the conflict in the profile be resolved?" msgstr "Jak by měl být problém v profilu vyřešen?" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:220 msgctxt "@action:label" msgid "Profile settings" msgstr "Nastavení profilu" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:250 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:375 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:244 msgctxt "@action:label" msgid "Name" msgstr "Název" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:268 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:261 msgctxt "@action:label" msgid "Intent" msgstr "Záměr" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:286 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:228 msgctxt "@action:label" msgid "Not in profile" msgstr "Není v profilu" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:233 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" msgstr[0] "%1 přepsání" msgstr[1] "%1 přepsání" msgstr[2] "%1 přepsání" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:305 msgctxt "@action:label" msgid "Derivative from" msgstr "Derivát z" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:311 msgctxt "@action:label" msgid "%1, %2 override" msgid_plural "%1, %2 overrides" msgstr[0] "%1, %2 override" msgstr[1] "%1, %2 overrides" msgstr[2] "%1, %2 overrides" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:333 msgctxt "@info:tooltip" msgid "How should the conflict in the material be resolved?" msgstr "Jak by měl být problém v materiálu vyřešen?" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:360 msgctxt "@action:label" msgid "Material settings" msgstr "Nastavení materiálu" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:396 msgctxt "@action:label" msgid "Setting visibility" msgstr "Nastavení zobrazení" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:405 msgctxt "@action:label" msgid "Mode" msgstr "Mód" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:421 msgctxt "@action:label" msgid "Visible settings:" msgstr "Viditelná zařízení:" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:426 msgctxt "@action:label" msgid "%1 out of %2" msgstr "%1 z %2" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:447 msgctxt "@action:warning" msgid "Loading a project will clear all models on the build plate." msgstr "Nahrání projektu vymaže všechny modely na podložce." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:514 msgctxt "@action:button" msgid "Open" msgstr "Otevřít" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:520 msgctxt "@action:button" msgid "Open project anyway" msgstr "Přesto otevřít projekt" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:529 msgctxt "@action:button" msgid "Install missing material" msgstr "Nainstalovat chybějící materiál" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" msgid "Want more?" msgstr "Chcete více?" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" msgid "Backup Now" msgstr "Zálohovat nyní" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 msgctxt "@checkbox:description" msgid "Auto Backup" msgstr "Automatické zálohy" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 msgctxt "@checkbox:description" msgid "Automatically create a backup each day that Cura is started." msgstr "Automaticky vytvořte zálohu každý den, kdy je spuštěna Cura." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64 msgctxt "@button" msgid "Restore" msgstr "Obnovit" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93 msgctxt "@dialog:title" msgid "Delete Backup" msgstr "Odstranit zálohu" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94 msgctxt "@dialog:info" msgid "Are you sure you want to delete this backup? This cannot be undone." msgstr "Opravdu chcete tuto zálohu smazat? To nelze vrátit zpět." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102 msgctxt "@dialog:title" msgid "Restore Backup" msgstr "Obnovit zálohu" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103 msgctxt "@dialog:info" msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" msgstr "Před obnovením zálohy budete muset restartovat Curu. Chcete nyní Curu zavřít?" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 msgctxt "@backuplist:label" msgid "Cura Version" msgstr "Cura verze" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 msgctxt "@backuplist:label" msgid "Machines" msgstr "Zařízení" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 msgctxt "@backuplist:label" msgid "Materials" msgstr "Materiály" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 msgctxt "@backuplist:label" msgid "Profiles" msgstr "Profily" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 msgctxt "@backuplist:label" msgid "Plugins" msgstr "Zásuvné moduly" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25 msgctxt "@title:window" msgid "Cura Backups" msgstr "Cura zálohy" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 msgctxt "@title" msgid "My Backups" msgstr "Moje zálohy" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36 msgctxt "@empty_state" msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." msgstr "Momentálně nemáte žádné zálohy. Pomocí tlačítka 'Zálohovat nyní' vytvořte." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55 msgctxt "@backup_limit_info" msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." msgstr "Během fáze náhledu budete omezeni na 5 viditelných záloh. Chcete-li zobrazit starší, odstraňte zálohu." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "Zálohovat a synchronizovat vaše nastavení Cura." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:49 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:164 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:212 msgctxt "@button" msgid "Sign in" msgstr "Přihlásit se" #: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216 msgctxt "@option" msgid "Save Cura project and print file" msgstr "Uložit projekt Cura a tiskový soubor UFP" #: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217 msgctxt "@option" msgid "Save Cura project" msgstr "Uložit projekt Cura" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "Aktualizovat firmware" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "Firmware je software běžící přímo na vaší 3D tiskárně. Tento firmware řídí krokové motory, reguluje teplotu a v konečném důsledku zajišťuje vaši práci tiskárny." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "Dodávání firmwaru s novými tiskárnami funguje, ale nové verze mají obvykle více funkcí a vylepšení." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Automaticky aktualizovat firmware" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Nahrát vlastní firmware" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "Firmware nelze aktualizovat, protože není spojeno s tiskárnou." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "Firmware nelze aktualizovat, protože připojení k tiskárně nepodporuje aktualizaci firmwaru." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Vybrat vlastní firmware" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113 msgctxt "@title:window" msgid "Firmware Update" msgstr "Aktualizace firmwaru" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137 msgctxt "@label" msgid "Updating firmware." msgstr "Aktualizuji firmware." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139 msgctxt "@label" msgid "Firmware update completed." msgstr "Aktualizace firmwaru kompletní." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "Aktualizace firmwaru selhala kvůli neznámému problému." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "Aktualizace firmwaru selhala kvůli chybě v komunikaci." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "Aktualizace firmwaru selhala kvůli chybě vstupu / výstupu." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "Aktualizace firmwaru selhala kvůli chybějícímu firmwaru." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:14 msgctxt "@title:window" msgid "Convert Image" msgstr "Konvertovat obrázek" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33 msgctxt "@action:label" msgid "Height (mm)" msgstr "Výška (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "Maximální vzdálenost každého pixelu od „základny“." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:66 msgctxt "@action:label" msgid "Base (mm)" msgstr "Základna (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:90 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "Výška základny od podložky v milimetrech." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:100 msgctxt "@action:label" msgid "Width (mm)" msgstr "Šířka (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:124 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate" msgstr "Šířka na podložce v milimetrech" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:134 msgctxt "@action:label" msgid "Depth (mm)" msgstr "Hloubka (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:158 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "Hloubka podložky v milimetrech" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:187 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "Tmavější je vyšší" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:188 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "Světlejší je vyšší" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." msgstr "U litofanů by tmavé pixely měly odpovídat silnějším místům, aby blokovaly více světla procházejícího. Pro výškové mapy znamenají světlejší pixely vyšší terén, takže světlejší pixely by měly odpovídat silnějším umístěním v generovaném 3D modelu." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:205 msgctxt "@action:label" msgid "Color Model" msgstr "Barevný model" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:224 msgctxt "@item:inlistbox" msgid "Linear" msgstr "Lineární" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:225 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "Průsvitnost" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:232 msgctxt "@info:tooltip" msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." msgstr "Pro litofany je k dispozici jednoduchý logaritmický model pro průsvitnost. U výškových map odpovídají hodnoty pixelů lineárně výškám." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:242 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "1mm propustnost (%)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:263 msgctxt "@info:tooltip" msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." msgstr "Procento světla pronikajícího do tisku o tloušťce 1 milimetr. Snížení této hodnoty zvyšuje kontrast v tmavých oblastech a snižuje kontrast ve světlých oblastech obrazu." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:274 msgctxt "@action:label" msgid "Smoothing" msgstr "Vyhlazování" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:298 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "Množství vyhlazení, které se použije na obrázek." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:329 #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:136 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:143 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:80 msgctxt "@action:button" msgid "OK" msgstr "OK" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 msgctxt "@title:tab" msgid "Printer" msgstr "Tiskárna" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 msgctxt "@title:label" msgid "Nozzle Settings" msgstr "Nastavení trysky" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74 msgctxt "@label" msgid "Nozzle size" msgstr "Velikost trysky" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 msgctxt "@label" msgid "mm" msgstr "mm" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88 msgctxt "@label" msgid "Compatible material diameter" msgstr "Kompatibilní průměr materiálu" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104 msgctxt "@label" msgid "Nozzle offset X" msgstr "X offset trysky" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119 msgctxt "@label" msgid "Nozzle offset Y" msgstr "Y offset trysky" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134 msgctxt "@label" msgid "Cooling Fan Number" msgstr "Číslo chladícího větráku" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162 msgctxt "@title:label" msgid "Extruder Start G-code" msgstr "Počáteční G-kód extuderu" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176 msgctxt "@title:label" msgid "Extruder End G-code" msgstr "Ukončující G-kód extuderu" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 msgctxt "@title:label" msgid "Printer Settings" msgstr "Nastavení tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68 msgctxt "@label" msgid "X (Width)" msgstr "X (Šířka)" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83 msgctxt "@label" msgid "Y (Depth)" msgstr "Y (Hloubka)" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98 msgctxt "@label" msgid "Z (Height)" msgstr "Z (Výška)" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112 msgctxt "@label" msgid "Build plate shape" msgstr "Tvar tiskové podložky" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125 msgctxt "@label" msgid "Origin at center" msgstr "Počátek ve středu" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137 msgctxt "@label" msgid "Heated bed" msgstr "Topná podložka" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149 msgctxt "@label" msgid "Heated build volume" msgstr "Vyhřívaný objem sestavení" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161 msgctxt "@label" msgid "G-code flavor" msgstr "Varianta G kódu" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185 msgctxt "@title:label" msgid "Printhead Settings" msgstr "Nastavení tiskové hlavy" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197 msgctxt "@label" msgid "X min" msgstr "X min" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217 msgctxt "@label" msgid "Y min" msgstr "Y min" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237 msgctxt "@label" msgid "X max" msgstr "X max" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257 msgctxt "@label" msgid "Y max" msgstr "Y max" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275 msgctxt "@label" msgid "Gantry Height" msgstr "Výška rámu tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289 msgctxt "@label" msgid "Number of Extruders" msgstr "Počet extrůderů" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341 msgctxt "@label" msgid "Apply Extruder offsets to GCode" msgstr "Aplikovat offsety extruderu do G kódu" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:389 msgctxt "@title:label" msgid "Start G-code" msgstr "Počáteční G kód" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:400 msgctxt "@title:label" msgid "End G-code" msgstr "Ukončující G kód" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15 msgctxt "@title" msgid "Changes from your account" msgstr "Změny z vašeho účtu" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 msgctxt "@button" msgid "Dismiss" msgstr "Schovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:118 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:175 msgctxt "@button" msgid "Next" msgstr "Další" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52 msgctxt "@label" msgid "The following packages will be added:" msgstr "Následující balíčky byly přidány:" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94 msgctxt "@label" msgid "The following packages can not be installed because of an incompatible Cura version:" msgstr "Následující balíčky nelze nainstalovat z důvodu nekompatibilní verze Cura:" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15 msgctxt "@title" msgid "Install missing Materials" msgstr "Nainstalovat chybějící materiály" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:15 msgctxt "@button" msgid "Plugin license agreement" msgstr "Licenční smlouva modulu" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:47 msgctxt "@text" msgid "Please read and agree with the plugin licence." msgstr "Prosím přečtěte si a přijměte licenci modulu." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:70 msgctxt "@button" msgid "Accept" msgstr "Příjmout" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11 msgctxt "@header" msgid "Manage packages" msgstr "Spravovat balíčky" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15 msgctxt "@text" msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly." msgstr "Zde můžete spravovat své Ultimaker Cura moduly a materiály. Udržujte své moduly aktuální a pravidelně zálohujte své nastavení." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32 msgctxt "@info:tooltip" msgid "Manage packages" msgstr "Spravovat balíčky" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:87 msgctxt "@title" msgid "Loading..." msgstr "Načítám..." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:148 msgctxt "@button" msgid "Plugins" msgstr "Zásuvné moduly" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:156 msgctxt "@button" msgid "Materials" msgstr "Materiály" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:193 msgctxt "@info" msgid "Search in the browser" msgstr "Hledat v prohlížeči" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:271 msgctxt "@button" msgid "In order to use the package you will need to restart Cura" msgstr "Abyste mohli balíček použít, musíte restartovat Curu" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:279 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "Ukončit %1" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:8 #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MissingPackages.qml:8 msgctxt "@header" msgid "Install Materials" msgstr "Instalovat materiály" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:12 msgctxt "@text" msgid "Select and install material profiles optimised for your Ultimaker 3D printers." msgstr "Vyberte a nainstalujte materiálové profily optimalizované pro vaše 3D tiskárny Ultimaker." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35 msgctxt "@label" msgid "You need to accept the license to install the package" msgstr "Pro instalaci balíčku musíte přijmout licenční ujednání" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/OnboardBanner.qml:101 #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:207 msgctxt "@button:label" msgid "Learn More" msgstr "Zjistit Více" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:172 msgctxt "@label Is followed by the name of an author" msgid "By" msgstr "Od" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226 msgctxt "@button" msgid "Enable" msgstr "Zapnout" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226 msgctxt "@button" msgid "Disable" msgstr "Vypnout" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:244 msgctxt "@button" msgid "Downgrading..." msgstr "Snižuji verzi..." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:245 msgctxt "@button" msgid "Downgrade" msgstr "Snížit verzi" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:249 msgctxt "@button" msgid "Installing..." msgstr "Instaluji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:250 msgctxt "@button" msgid "Install" msgstr "Instalovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:254 msgctxt "@button" msgid "Uninstall" msgstr "Odinstalovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269 msgctxt "@button" msgid "Updating..." msgstr "Aktualizuji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269 msgctxt "@button" msgid "Update" msgstr "Aktualizovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15 msgctxt "@header" msgid "Package details" msgstr "Detaily balíčku" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40 msgctxt "@button:tooltip" msgid "Back" msgstr "Zpět" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:81 msgctxt "@header" msgid "Description" msgstr "Popis" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:110 msgctxt "@header" msgid "Compatible printers" msgstr "Kompatibilní tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:134 msgctxt "@info" msgid "No compatibility information" msgstr "Žádné informace o kompatibilitě" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:152 msgctxt "@header" msgid "Compatible support materials" msgstr "Kompatibilní materiály podpor" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:176 msgctxt "@info No materials" msgid "None" msgstr "Žádné" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:193 msgctxt "@header" msgid "Compatible with Material Station" msgstr "Kompatibilní s Material Station" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202 #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "Yes" msgstr "Ano" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202 #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228 msgctxt "@info" msgid "No" msgstr "Ne" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:219 msgctxt "@header" msgid "Optimized for Air Manager" msgstr "Optimalizováno pro Air Manager" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Visit plug-in website" msgstr "Navštívit webovou stránku modulu" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243 msgctxt "@button" msgid "Website" msgstr "Webová stránka" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:252 msgctxt "@button" msgid "Buy spool" msgstr "Koupit cívku" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:261 msgctxt "@button" msgid "Safety datasheet" msgstr "Bezpečnostní list" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:270 msgctxt "@button" msgid "Technical datasheet" msgstr "Technický list" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Failed to load packages:" msgstr "Nepodařilo se načíst balíčky:" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151 msgctxt "@button" msgid "Retry?" msgstr "Opakovat?" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:167 msgctxt "@button" msgid "Loading" msgstr "Načítám" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No more results to load" msgstr "Žádné další výsledky k načtení" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183 msgctxt "@message" msgid "No results found with current filter" msgstr "S aktuálním filtrem nebyly nalezeny žádné výsledky" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:226 msgctxt "@button" msgid "Load more" msgstr "Načíst více" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8 msgctxt "@header" msgid "Install Plugins" msgstr "Nainstalovat moduly" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12 msgctxt "@text" msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users." msgstr "Urychlete váš postup práce a přizpůsobte si zážitek s Ultimaker Cura pomocí modulů, kterými přispěla naše úžasná komunita uživatelů." #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21 msgctxt "@info" msgid "Ultimaker Verified Plug-in" msgstr "Modul ověřený společností Ultimaker" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22 msgctxt "@info" msgid "Ultimaker Certified Material" msgstr "Materiál certifikovaný společností Ultimaker" #: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23 msgctxt "@info" msgid "Ultimaker Verified Package" msgstr "Balíček ověřený společností Ultimaker" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100 msgctxt "@info" msgid "" "Please make sure your printer has a connection:\n" "- Check if the printer is turned on.\n" "- Check if the printer is connected to the network.\n" "- Check if you are signed in to discover cloud-connected printers." msgstr "" "Zkontrolujte, zda má tiskárna připojení:\n" "- Zkontrolujte, zda je tiskárna zapnutá.\n" "- Zkontrolujte, zda je tiskárna připojena k síti.\n" "- Zkontrolujte, zda jste přihlášeni k objevování tiskáren připojených k cloudu." #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:113 msgctxt "@info" msgid "Please connect your printer to the network." msgstr "Připojte tiskárnu k síti." #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:147 msgctxt "@label link to technical assistance" msgid "View user manuals online" msgstr "Zobrazit online manuály" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:163 msgctxt "@info" msgid "In order to monitor your print from Cura, please connect the printer." msgstr "Abyste mohli monitorovat tisk z Cury, připojte prosím tiskárnu." #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41 msgctxt "@label" msgid "Mesh Type" msgstr "Typ síťového modelu" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81 msgctxt "@label" msgid "Normal model" msgstr "Normální model" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96 msgctxt "@label" msgid "Print as support" msgstr "Tisknout jako podporu" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "Upravte nastavení překrývání" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126 msgctxt "@label" msgid "Don't support overlaps" msgstr "Nepodporovat překrývání" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "Pouze síť výplně" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "Síť řezu" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385 msgctxt "@action:button" msgid "Select settings" msgstr "Vybrat nastavení" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "Vybrat nastavení k přizpůsobení pro tento model" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:102 msgctxt "@label:textbox" msgid "Filter..." msgstr "Filtrovat..." #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75 msgctxt "@label:checkbox" msgid "Show all" msgstr "Zobrazit vše" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "Zásuvný balíček Post Processing" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "Skripty Post Processingu" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215 msgctxt "@action" msgid "Add a script" msgstr "Přidat skript" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251 msgctxt "@label" msgid "Settings" msgstr "Nastavení" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:459 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "Změnít aktivní post-processing skripty." #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:463 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "Následují skript je aktivní:" msgstr[1] "Následují skripty jsou aktivní:" msgstr[2] "Následují skripty jsou aktivní:" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:18 #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:47 msgctxt "@label" msgid "Color scheme" msgstr "Barevné schéma" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:104 msgctxt "@label:listbox" msgid "Material Color" msgstr "Barva materiálu" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:108 msgctxt "@label:listbox" msgid "Line Type" msgstr "Typ úsečky" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:112 msgctxt "@label:listbox" msgid "Speed" msgstr "Rychlost" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:116 msgctxt "@label:listbox" msgid "Layer Thickness" msgstr "Tloušťka vrstvy" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:120 msgctxt "@label:listbox" msgid "Line Width" msgstr "Šířka čáry" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:124 msgctxt "@label:listbox" msgid "Flow" msgstr "Průtok" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:164 msgctxt "@label" msgid "Compatibility Mode" msgstr "Mód kompatibility" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:231 msgctxt "@label" msgid "Travels" msgstr "Cesty" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237 msgctxt "@label" msgid "Helpers" msgstr "Pomocníci" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243 msgctxt "@label" msgid "Shell" msgstr "Shell" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64 msgctxt "@label" msgid "Infill" msgstr "Výplň" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257 msgctxt "@label" msgid "Starts" msgstr "Začátky" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:304 msgctxt "@label" msgid "Only Show Top Layers" msgstr "Zobrazit jen vrchní vrstvy" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:313 msgctxt "@label" msgid "Show 5 Detailed Layers On Top" msgstr "Zobrazit 5 podrobných vrstev nahoře" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326 msgctxt "@label" msgid "Top / Bottom" msgstr "Nahoře / Dole" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:330 msgctxt "@label" msgid "Inner Wall" msgstr "Vnitřní stěna" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:397 msgctxt "@label" msgid "min" msgstr "min" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:462 msgctxt "@label" msgid "max" msgstr "max" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:16 msgctxt "@title:window" msgid "More information on anonymous data collection" msgstr "Další informace o anonymním shromažďování údajů" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:73 msgctxt "@text:window" msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu. Níže uvádíme příklad všech sdílených dat:" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:107 msgctxt "@text:window" msgid "I don't want to send anonymous data" msgstr "Nechci posílat anonymní data" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:116 msgctxt "@text:window" msgid "Allow sending anonymous data" msgstr "Povolit zasílání anonymních dat" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 msgctxt "@title" msgid "Build Plate Leveling" msgstr "Vyrovnávání podložky" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42 msgctxt "@label" msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." msgstr "Chcete-li se ujistit, že vaše výtisky vyjdou skvěle, můžete nyní sestavení své podložku. Když kliknete na „Přesunout na další pozici“, tryska se přesune do různých poloh, které lze upravit." #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52 msgctxt "@label" msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." msgstr "Pro každou pozici; vložte kousek papíru pod trysku a upravte výšku tiskové desky. Výška desky pro sestavení tisku je správná, když je papír lehce uchopen špičkou trysky." #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67 msgctxt "@action:button" msgid "Start Build Plate Leveling" msgstr "Spustit vyrovnání položky" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79 msgctxt "@action:button" msgid "Move to Next Position" msgstr "Přesunout na další pozici" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" msgid "Please select any upgrades made to this Ultimaker Original" msgstr "Vyberte prosím všechny upgrady provedené v tomto originálu Ultimaker" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39 msgctxt "@label" msgid "Heated Build Plate (official kit or self-built)" msgstr "Vyhřívaná podložka (Oficiální kit, nebo vytvořená)" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "Připojte se k síťové tiskárně" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." msgstr "Chcete-li tisknout přímo na tiskárně prostřednictvím sítě, zkontrolujte, zda je tiskárna připojena k síti pomocí síťového kabelu nebo připojením tiskárny k síti WIFI. Pokud nepřipojíte Curu k tiskárně, můžete stále používat jednotku USB k přenosu souborů g-kódu do vaší tiskárny." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "Vyberte svou tiskárnu z nabídky níže:" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71 msgctxt "@action:button" msgid "Edit" msgstr "Upravit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:140 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:321 msgctxt "@action:button" msgid "Remove" msgstr "Odstranit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90 msgctxt "@action:button" msgid "Refresh" msgstr "Aktualizovat" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161 msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "Pokud vaše tiskárna není uvedena, přečtěte si průvodce řešením problémů se síťovým tiskem " #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:247 msgctxt "@label" msgid "Type" msgstr "Typ" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:256 msgctxt "@label" msgid "Firmware version" msgstr "Verze firmwaru" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:266 msgctxt "@label" msgid "Address" msgstr "Adresa" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "Tato tiskárna není nastavena tak, aby hostovala skupinu tiskáren." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "Tato tiskárna je hostitelem skupiny tiskáren %1." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "Tiskárna na této adrese dosud neodpověděla." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250 msgctxt "@action:button" msgid "Connect" msgstr "Připojit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261 msgctxt "@title:window" msgid "Invalid IP address" msgstr "Špatná IP adresa" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:141 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "Prosím zadejte validní IP adresu." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272 msgctxt "@title:window" msgid "Printer Address" msgstr "Adresa tiskárny" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:97 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "Vložte IP adresu vaší tiskárny na síti." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" msgid "Configuration Changes" msgstr "Změny konfigurace" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36 msgctxt "@action:button" msgid "Override" msgstr "Override" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83 msgctxt "@label" msgid "The assigned printer, %1, requires the following configuration change:" msgid_plural "The assigned printer, %1, requires the following configuration changes:" msgstr[0] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace:" msgstr[1] "Přiřazená tiskárna %1 vyžaduje následující změny akonfigurace:" msgstr[2] "Přiřazená tiskárna %1 vyžaduje následující změnu konfigurace:" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87 msgctxt "@label" msgid "The printer %1 is assigned, but the job contains an unknown material configuration." msgstr "Tiskárna %1 je přiřazena, ale úloha obsahuje neznámou konfiguraci materiálu." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97 msgctxt "@label" msgid "Change material %1 from %2 to %3." msgstr "Změnit materiál %1 z %2 na %3." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100 msgctxt "@label" msgid "Load %3 as material %1 (This cannot be overridden)." msgstr "Načíst %3 jako materiál %1 (Toho nemůže být přepsáno)." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103 msgctxt "@label" msgid "Change print core %1 from %2 to %3." msgstr "Změnit jádro tisku %1 z %2 na %3." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106 msgctxt "@label" msgid "Change build plate to %1 (This cannot be overridden)." msgstr "Změnit podložku na %1 (Toto nemůže být přepsáno)." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113 msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "Přepsání použije zadaná nastavení s existující konfigurací tiskárny. To může vést k selhání tisku." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175 msgctxt "@label" msgid "Glass" msgstr "Sklo" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154 msgctxt "@label" msgid "Aluminum" msgstr "Hliník" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 msgctxt "@label" msgid "Move to top" msgstr "Přesunout nahoru" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 msgctxt "@label" msgid "Delete" msgstr "Odstranit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 msgctxt "@label" msgid "Resume" msgstr "Obnovit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 msgctxt "@label" msgid "Pausing..." msgstr "Pozastavuji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 msgctxt "@label" msgid "Resuming..." msgstr "Obnovuji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:279 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:288 msgctxt "@label" msgid "Pause" msgstr "Pozastavit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Aborting..." msgstr "Ruším..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Abort" msgstr "Zrušit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "Doopravdy chcete posunout %1 na začátek fronty?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 msgctxt "@window:title" msgid "Move print job to top" msgstr "Přesunout tiskovou úlohu nahoru" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "Doopravdy chcete odstranit %1?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152 msgctxt "@window:title" msgid "Delete print job" msgstr "Odstranit tiskovou úlohu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "Doopravdy chcete zrušit %1?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:326 msgctxt "@window:title" msgid "Abort print" msgstr "Zrušit tisk" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "Spravovat tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "Aktualizujte firmware tiskárny a spravujte frontu vzdáleně." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam." msgstr "Vstup z webové kamery nemůže být pro cloudové tiskárny zobrazen v Ultimaker Cura. Klikněte na \"Spravovat tiskárnu\", abyste navštívili Ultimaker Digital Factory a zobrazili tuto webkameru." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335 msgctxt "@label:status" msgid "Loading..." msgstr "Načítám..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339 msgctxt "@label:status" msgid "Unavailable" msgstr "Nedostupný" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343 msgctxt "@label:status" msgid "Unreachable" msgstr "Nedostupný" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347 msgctxt "@label:status" msgid "Idle" msgstr "Čekám" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 msgctxt "@label:status" msgid "Preparing..." msgstr "Připravuji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Printing" msgstr "Tisknu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397 msgctxt "@label" msgid "Untitled" msgstr "Bez názvu" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412 msgctxt "@label" msgid "Anonymous" msgstr "Anonymní" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "Jsou nutné změny v nastavení" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447 msgctxt "@action:button" msgid "Details" msgstr "Podrobnosti" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126 msgctxt "@label" msgid "Unavailable printer" msgstr "Nedostupná tiskárna" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128 msgctxt "@label" msgid "First available" msgstr "První dostupný" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 msgctxt "@label:status" msgid "Aborted" msgstr "Zrušeno" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74 msgctxt "@label:status" msgid "Finished" msgstr "Dokončeno" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 msgctxt "@label:status" msgid "Aborting..." msgstr "Ruším..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 msgctxt "@label:status" msgid "Failed" msgstr "Selhání" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 msgctxt "@label:status" msgid "Pausing..." msgstr "Pozastavuji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 msgctxt "@label:status" msgid "Paused" msgstr "Pozastaveno" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102 msgctxt "@label:status" msgid "Resuming..." msgstr "Obnovuji..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104 msgctxt "@label:status" msgid "Action required" msgstr "Akce vyžadována" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106 msgctxt "@label:status" msgid "Finishes %1 at %2" msgstr "Dokončuji %1 z %2" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29 msgctxt "@label" msgid "Queued" msgstr "Zařazeno do fronty" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63 msgctxt "@label link to connect manager" msgid "Manage in browser" msgstr "Spravovat v prohlížeči" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90 msgctxt "@label" msgid "There are no print jobs in the queue. Slice and send a job to add one." msgstr "Ve frontě nejsou žádné tiskové úlohy. Slicujte a odesláním úlohy jednu přidejte." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98 msgctxt "@label" msgid "Print jobs" msgstr "Tiskové úlohy" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107 msgctxt "@label" msgid "Total print time" msgstr "Celkový čas tisknutí" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116 msgctxt "@label" msgid "Waiting for" msgstr "Čekám na" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12 msgctxt "@title:window" msgid "Print over network" msgstr "Tisk přes síť" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53 msgctxt "@action:button" msgid "Print" msgstr "Tisk" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81 msgctxt "@label" msgid "Printer selection" msgstr "Výběr tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24 msgctxt "@action:button" msgid "Sign in" msgstr "Přihlásit se" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:19 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" msgid "Sign in to the Ultimaker platform" msgstr "Přihlásit se do platformy Ultimaker" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:39 msgctxt "@text" msgid "" "- Add material profiles and plug-ins from the Marketplace\n" "- Back-up and sync your material profiles and plug-ins\n" "- Share ideas and get help from 48,000+ users in the Ultimaker community" msgstr "" "- Přidejte materiálnové profily and moduly z Obchodu\n" "- Zálohujte a synchronizujte vaše materiálové profily and moduly\n" "- Sdílejte nápady a získejte pomoc od více než 48 000 uživatelů v Ultimaker komunitě" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:58 msgctxt "@button" msgid "Create a free Ultimaker account" msgstr "Vytvořit účet Ultimaker zdarma" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35 msgctxt "@label" msgid "Checking..." msgstr "Kontroluji..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42 msgctxt "@label" msgid "Account synced" msgstr "Účet byl synchronizován" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:49 msgctxt "@label" msgid "Something went wrong..." msgstr "Nastala chyba..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:102 msgctxt "@button" msgid "Install pending updates" msgstr "Nainstalujte čekající aktualizace" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:123 msgctxt "@button" msgid "Check for account updates" msgstr "Zkontrolovat aktualizace pro účet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:78 msgctxt "@label The argument is a timestamp" msgid "Last update: %1" msgstr "Poslední aktualizace: %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:107 msgctxt "@button" msgid "Ultimaker Account" msgstr "Ultimaker Account" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:126 msgctxt "@button" msgid "Sign Out" msgstr "Odhlásit se" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" msgid "No time estimation available" msgstr "Žádný odhad času není dostupný" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" msgid "No cost estimation available" msgstr "Žádná cena není dostupná" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 msgctxt "@button" msgid "Preview" msgstr "Náhled" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" msgid "Time estimation" msgstr "Odhad času" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:107 msgctxt "@label" msgid "Material estimation" msgstr "Odhad materiálu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:156 msgctxt "@label m for meter" msgid "%1m" msgstr "%1m" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:157 msgctxt "@label g for grams" msgid "%1g" msgstr "%1g" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54 msgctxt "@label:PrintjobStatus" msgid "Slicing..." msgstr "Slicuji..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:78 msgctxt "@label:PrintjobStatus" msgid "Unable to slice" msgstr "Nelze slicovat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114 msgctxt "@button" msgid "Processing" msgstr "Zpracovává se" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114 msgctxt "@button" msgid "Slice" msgstr "Slicovat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:115 msgctxt "@label" msgid "Start the slicing process" msgstr "Začít proces slicování" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:132 msgctxt "@button" msgid "Cancel" msgstr "Zrušit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:81 msgctxt "@action:inmenu" msgid "Show Online Troubleshooting" msgstr "Zobrazit online řešení problémů" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:88 msgctxt "@action:inmenu" msgid "Toggle Full Screen" msgstr "Přepnout zobrazení na celou obrazovku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:96 msgctxt "@action:inmenu" msgid "Exit Full Screen" msgstr "Ukončit zobrazení na celou obrazovku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:103 msgctxt "@action:inmenu menubar:edit" msgid "&Undo" msgstr "&Vrátit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:113 msgctxt "@action:inmenu menubar:edit" msgid "&Redo" msgstr "&Znovu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:131 msgctxt "@action:inmenu menubar:file" msgid "&Quit" msgstr "&Ukončit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" msgid "3D View" msgstr "3D Pohled" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" msgid "Front View" msgstr "Přední pohled" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" msgid "Top View" msgstr "Pohled seshora" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" msgid "Bottom View" msgstr "Pohled zezdola" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167 msgctxt "@action:inmenu menubar:view" msgid "Left Side View" msgstr "Pohled z pravé strany" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174 msgctxt "@action:inmenu menubar:view" msgid "Right Side View" msgstr "Pohled z pravé strany" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:188 msgctxt "@action:inmenu" msgid "Configure Cura..." msgstr "Konfigurovat Cura..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195 msgctxt "@action:inmenu menubar:printer" msgid "&Add Printer..." msgstr "Přidat t&iskárnu..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:201 msgctxt "@action:inmenu menubar:printer" msgid "Manage Pr&inters..." msgstr "Spravovat &tiskárny..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:208 msgctxt "@action:inmenu" msgid "Manage Materials..." msgstr "Spravovat materiály..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:216 msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate." msgid "Add more materials from Marketplace" msgstr "Přidat více materiálů z Obchodu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:223 msgctxt "@action:inmenu menubar:profile" msgid "&Update profile with current settings/overrides" msgstr "&Aktualizovat profil s aktuálními nastaveními/přepsáními" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:231 msgctxt "@action:inmenu menubar:profile" msgid "&Discard current changes" msgstr "Smazat aktuální &změny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:243 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." msgstr "&Vytvořit profil z aktuálního nastavení/přepsání." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:249 msgctxt "@action:inmenu menubar:profile" msgid "Manage Profiles..." msgstr "Spravovat profily..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:257 msgctxt "@action:inmenu menubar:help" msgid "Show Online &Documentation" msgstr "Zobrazit online &dokumentaci" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265 msgctxt "@action:inmenu menubar:help" msgid "Report a &Bug" msgstr "Nahlásit &chybu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:273 msgctxt "@action:inmenu menubar:help" msgid "What's New" msgstr "Co je nového" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:287 msgctxt "@action:inmenu menubar:help" msgid "About..." msgstr "Více..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:294 msgctxt "@action:inmenu menubar:edit" msgid "Delete Selected" msgstr "Smazat vybrané" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:304 msgctxt "@action:inmenu menubar:edit" msgid "Center Selected" msgstr "Centrovat vybrané" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:313 msgctxt "@action:inmenu menubar:edit" msgid "Multiply Selected" msgstr "Násobit vybrané" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:322 msgctxt "@action:inmenu" msgid "Delete Model" msgstr "Odstranit model" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:330 msgctxt "@action:inmenu" msgid "Ce&nter Model on Platform" msgstr "&Centerovat model na podložce" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:336 msgctxt "@action:inmenu menubar:edit" msgid "&Group Models" msgstr "Sesk&upit modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:356 msgctxt "@action:inmenu menubar:edit" msgid "Ungroup Models" msgstr "Rozdělit modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:366 msgctxt "@action:inmenu menubar:edit" msgid "&Merge Models" msgstr "Spo&jit modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:376 msgctxt "@action:inmenu" msgid "&Multiply Model..." msgstr "Náso&bení modelu..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383 msgctxt "@action:inmenu menubar:edit" msgid "Select All Models" msgstr "Vybrat všechny modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:393 msgctxt "@action:inmenu menubar:edit" msgid "Clear Build Plate" msgstr "Vyčistit podložku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:403 msgctxt "@action:inmenu menubar:file" msgid "Reload All Models" msgstr "Znovu načíst všechny modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" msgstr "Uspořádat všechny modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:420 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" msgstr "Uspořádat selekci" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Positions" msgstr "Resetovat všechny pozice modelů" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Transformations" msgstr "Resetovat všechny transformace modelů" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:443 msgctxt "@action:inmenu menubar:file" msgid "&Open File(s)..." msgstr "&Otevřít soubor(y)..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:453 msgctxt "@action:inmenu menubar:file" msgid "&New Project..." msgstr "&Nový projekt..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:460 msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "Zobrazit složku s konfigurací" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:467 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:476 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "Konfigurovat viditelnost nastavení..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32 msgctxt "@label:button" msgid "My printers" msgstr "Moje tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34 msgctxt "@tooltip:button" msgid "Monitor printers in Ultimaker Digital Factory." msgstr "Sledujte tiskárny v Ultimaker Digital Factory." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41 msgctxt "@tooltip:button" msgid "Create print projects in Digital Library." msgstr "Vytvořte tiskové projekty v Digital Library." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46 msgctxt "@label:button" msgid "Print jobs" msgstr "Tiskové úlohy" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48 msgctxt "@tooltip:button" msgid "Monitor print jobs and reprint from your print history." msgstr "Sledujte tiskové úlohy a znovu tiskněte z historie." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55 msgctxt "@tooltip:button" msgid "Extend Ultimaker Cura with plugins and material profiles." msgstr "Rozšiřte Ultimaker Cura pomocí modulů a materiálových profilů." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62 msgctxt "@tooltip:button" msgid "Become a 3D printing expert with Ultimaker e-learning." msgstr "Staňte se expertem na 3D tisk díky Ultimaker e-learningu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67 msgctxt "@label:button" msgid "Ultimaker support" msgstr "Ultimaker podpora" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69 msgctxt "@tooltip:button" msgid "Learn how to get started with Ultimaker Cura." msgstr "Zjistěte, jak začít s Ultimaker Cura." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74 msgctxt "@label:button" msgid "Ask a question" msgstr "Položit otázku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76 msgctxt "@tooltip:button" msgid "Consult the Ultimaker Community." msgstr "Poraďte se s Ultimaker komunitou." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81 msgctxt "@label:button" msgid "Report a bug" msgstr "Nahlásit chybu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83 msgctxt "@tooltip:button" msgid "Let developers know that something is going wrong." msgstr "Dejte vývojářům vědět, že je něco špatně." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90 msgctxt "@tooltip:button" msgid "Visit the Ultimaker website." msgstr "Navštivte web Ultimaker." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:107 msgctxt "@label" msgid "Hex" msgstr "Hexadecimální" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:250 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "Tento balíček bude nainstalován po restartování." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:463 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:14 msgctxt "@title:tab" msgid "General" msgstr "Obecné" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 msgctxt "@title:tab" msgid "Settings" msgstr "Nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:17 msgctxt "@title:tab" msgid "Printers" msgstr "Tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:470 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70 msgctxt "@title:tab" msgid "Materials" msgstr "Materiály" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:472 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:57 msgctxt "@title:tab" msgid "Profiles" msgstr "Profily" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:589 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "Zavírám %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:590 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:599 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "Doopravdy chcete zavřít %1?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:637 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16 msgctxt "@title:window" msgid "Open file(s)" msgstr "Otevřít soubor(y)" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:742 msgctxt "@window:title" msgid "Install Package" msgstr "Nainstalovat balíček" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:749 msgctxt "@title:window" msgid "Open File(s)" msgstr "Otevřít Soubor(y)" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:751 msgctxt "@text:window" msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." msgstr "Ve vybraných souborech jsme našli jeden nebo více souborů G-kódu. Naraz můžete otevřít pouze jeden soubor G-kódu. Pokud chcete otevřít soubor G-Code, vyberte pouze jeden." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:831 msgctxt "@title:window" msgid "Add Printer" msgstr "Přidat tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:839 msgctxt "@title:window" msgid "What's New" msgstr "Co je nového" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "O %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57 msgctxt "@label" msgid "version: %1" msgstr "verze: %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "Komplexní řešení pro 3D tisk z taveného filamentu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85 msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" msgstr "" "Cura vyvíjí Ultimaker B.V. ve spolupráci s komunitou.\n" "Cura hrdě používá následující open source projekty:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136 msgctxt "@label" msgid "Graphical user interface" msgstr "Grafické uživatelské prostředí" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137 msgctxt "@label" msgid "Application framework" msgstr "Aplikační framework" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138 msgctxt "@label" msgid "G-code generator" msgstr "Generátor G kódu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:139 msgctxt "@label" msgid "Interprocess communication library" msgstr "Meziprocesní komunikační knihovna" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label" msgid "Python bindings for libnest2d" msgstr "Propojení libnest2d s jazykem Python" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label" msgid "Polygon packing library, developed by Prusa Research" msgstr "Knihovna pro plošnou optimalizaci vyvinutá Prusa Research" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label" msgid "Support library for handling 3MF files" msgstr "Podpůrná knihovna pro manipulaci s 3MF soubory" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label" msgid "Support library for file metadata and streaming" msgstr "Podpůrná knihovna pro metadata souborů a streaming" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146 msgctxt "@label" msgid "Programming language" msgstr "Programovací jazyk" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147 msgctxt "@label" msgid "GUI framework" msgstr "GUI framework" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label" msgid "GUI framework bindings" msgstr "Propojení GUI frameworku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label" msgid "C/C++ Binding library" msgstr "Binding knihovna C/C++" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label" msgid "Data interchange format" msgstr "Formát výměny dat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label" msgid "Font" msgstr "Font" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154 msgctxt "@label" msgid "Polygon clipping library" msgstr "Knihovna pro výstřižky z mnohoúhelníků" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155 msgctxt "@label" msgid "JSON parser" msgstr "JSON parser" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 msgctxt "@label" msgid "Utility functions, including an image loader" msgstr "Pomocné funkce zahrnující načítání obrázků" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@label" msgid "Utility library, including Voronoi generation" msgstr "Pomocná knihovna zahrnující Voronoi generátor" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:161 msgctxt "@label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "Kořenové certifikáty pro ověření důvěryhodnosti SSL" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162 msgctxt "@label" msgid "Compatibility between Python 2 and 3" msgstr "Kompatibilita mezi Python 2 a 3" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label" msgid "Support library for system keyring access" msgstr "Podpůrná knihovna pro přístup k systémové klíčence" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label" msgid "Support library for faster math" msgstr "Podpůrný knihovna pro rychlejší matematické výpočty" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:165 msgctxt "@label" msgid "Support library for handling STL files" msgstr "Podpůrná knihovna pro práci se soubory STL" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:166 msgctxt "@label" msgid "Python bindings for Clipper" msgstr "Propojení Clipper s jazykem Python" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:167 msgctxt "@label" msgid "Serial communication library" msgstr "Knihovna pro sériovou komunikaci" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:168 msgctxt "@label" msgid "Support library for scientific computing" msgstr "Podpůrná knihovna pro vědecké výpočty" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169 msgctxt "@Label" msgid "Python Error tracking library" msgstr "Chyba v Python trackovací knihovně" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:170 msgctxt "@label" msgid "Support library for handling triangular meshes" msgstr "Podpůrná knihovna pro manipulaci s trojúhelníkovými sítěmi" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:171 msgctxt "@label" msgid "ZeroConf discovery library" msgstr "Knihovna ZeroConf discovery" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174 msgctxt "@label" msgid "Universal build system configuration" msgstr "Univerzální konfigurace překladu programů" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:175 msgctxt "@label" msgid "Dependency and package manager" msgstr "Správce závislostí a balíčků" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:176 msgctxt "@label" msgid "Packaging Python-applications" msgstr "Vytváření balíčků Python aplikací" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:177 msgctxt "@label" msgid "Linux cross-distribution application deployment" msgstr "Linux cross-distribution application deployment" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:178 msgctxt "@label" msgid "Generating Windows installers" msgstr "Generování instalátorů pro Windows" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17 msgctxt "@title:window" msgid "Open project file" msgstr "Otevřít soubor s projektem" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83 msgctxt "@text:window" msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" msgstr "Toto je soubor projektu Cura. Chcete jej otevřít jako projekt nebo importovat z něj modely?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:90 msgctxt "@text:window" msgid "Remember my choice" msgstr "Pamatuj si moji volbu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:104 msgctxt "@action:button" msgid "Open as project" msgstr "Otevřít jako projekt" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:109 msgctxt "@action:button" msgid "Import models" msgstr "Importovat modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13 msgctxt "@title:window" msgid "Discard or Keep changes" msgstr "Smazat nebo nechat změny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:49 msgctxt "@text:window, %1 is a profile name" msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "Upravili jste některá nastavení profilu. Chcete tato nastavení zachovat i po přepnutí profilů? V opačném případě můžete změny zahodit a načíst výchozí hodnoty z '%1'." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:75 msgctxt "@title:column" msgid "Profile settings" msgstr "Nastavení profilu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:77 msgctxt "@title:column" msgid "Current changes" msgstr "Aktuální změny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:104 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:799 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "Vždy se zeptat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:105 msgctxt "@option:discardOrKeep" msgid "Discard and never ask again" msgstr "Smazat a už se nikdy neptat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:106 msgctxt "@option:discardOrKeep" msgid "Keep and never ask again" msgstr "Nechat a už se nikdy neptat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:136 msgctxt "@action:button" msgid "Discard changes" msgstr "Smazat změny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:142 msgctxt "@action:button" msgid "Keep changes" msgstr "Zanechat změny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47 msgctxt "@text:window" msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" msgstr "Ve vybraných souborech jsme našli jeden nebo více projektových souborů. Naraz můžete otevřít pouze jeden soubor projektu. Doporučujeme importovat pouze modely z těchto souborů. Chtěli byste pokračovat?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 msgctxt "@action:button" msgid "Import all as models" msgstr "Importovat vše jako modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14 msgctxt "@title:window" msgid "Save Project" msgstr "Uložit projekt" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:175 msgctxt "@action:label" msgid "Extruder %1" msgstr "Extruder %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191 msgctxt "@action:label" msgid "%1 & material" msgstr "%1 & materiál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193 msgctxt "@action:label" msgid "Material" msgstr "Materiál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "Nezobrazovat souhrn projektu při uložení znovu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296 msgctxt "@action:button" msgid "Save" msgstr "Uložit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16 msgctxt "@label %1 is filled in with the name of an extruder" msgid "Print Selected Model with %1" msgid_plural "Print Selected Models with %1" msgstr[0] "Tisknout vybraný model pomocí %1" msgstr[1] "Tisknout vybraný model pomocí %1" msgstr[2] "Tisknout vybraný model pomocí %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:93 msgctxt "@text Print job name" msgid "Untitled" msgstr "Bez názvu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "Nasta&vení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87 msgctxt "@title:window" msgid "New project" msgstr "Nový projekt" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88 msgctxt "@info:question" msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." msgstr "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135 msgctxt "@action:button" msgid "Marketplace" msgstr "Obchod" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 msgctxt "@header" msgid "Configurations" msgstr "Konfigurace" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 msgctxt "@label" msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." msgstr "Tato konfigurace není k dispozici, protože %1 nebyl rozpoznán. Navštivte prosím %2 a stáhněte si správný materiálový profil." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 msgctxt "@label" msgid "Marketplace" msgstr "Obchod" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52 msgctxt "@label" msgid "Loading available configurations from the printer..." msgstr "Načítání dostupných konfigurací z tiskárny ..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53 msgctxt "@label" msgid "The configurations are not available because the printer is disconnected." msgstr "Konfigurace nejsou k dispozici, protože je tiskárna odpojena." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106 msgctxt "@tooltip" msgid "The configuration of this extruder is not allowed, and prohibits slicing." msgstr "Konfigurace tohoto extruderu není dovolena a znemožňuje slicování." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110 msgctxt "@tooltip" msgid "There are no profiles matching the configuration of this extruder." msgstr "Neexistují žádné profily odpovídající nastavení tohoto extruderu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250 msgctxt "@label" msgid "Select configuration" msgstr "Vybrat konfiguraci" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358 msgctxt "@label" msgid "Configurations" msgstr "Konfigurace" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27 msgctxt "@header" msgid "Custom" msgstr "Vlastní" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62 msgctxt "@label" msgid "Printer" msgstr "Tiskárna" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:217 msgctxt "@label" msgid "Enabled" msgstr "Povoleno" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:266 msgctxt "@label" msgid "Material" msgstr "Materiál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:392 msgctxt "@label" msgid "Use glue for better adhesion with this material combination." msgstr "S touto kombinací materiálu pro lepší adhezi použijte lepidlo." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:29 msgctxt "@label" msgid "Print Selected Model With:" msgid_plural "Print Selected Models With:" msgstr[0] "Tisknout vybraný model pomocí:" msgstr[1] "Tisknout vybrané modely pomocí:" msgstr[2] "Tisknout vybrané modely pomocí:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:92 msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "Násobit vybraný model" msgstr[1] "Násobit vybrané modele" msgstr[2] "Násobit vybrané modele" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:123 msgctxt "@label" msgid "Number of Copies" msgstr "Počet kopií" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/EditMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "Upr&avit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ExtensionMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "E&xtensions" msgstr "D&oplňky" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "&Soubor" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:45 msgctxt "@title:menu menubar:file" msgid "&Save Project..." msgstr "&Uložit projekt..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:78 msgctxt "@title:menu menubar:file" msgid "&Export..." msgstr "&Exportovat..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:89 msgctxt "@action:inmenu menubar:file" msgid "Export Selection..." msgstr "Výběr exportu..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/HelpMenu.qml:14 msgctxt "@title:menu menubar:toplevel" msgid "&Help" msgstr "Po&moc" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13 msgctxt "@label:category menu label" msgid "Material" msgstr "Materiál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:53 msgctxt "@label:category menu label" msgid "Favorites" msgstr "Oblíbené" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:78 msgctxt "@label:category menu label" msgid "Generic" msgstr "Obecné" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/OpenFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open File(s)..." msgstr "Otevřít soubor(y)..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PreferencesMenu.qml:21 msgctxt "@title:menu menubar:toplevel" msgid "P&references" msgstr "P&reference" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:13 msgctxt "@title:menu menubar:settings" msgid "&Printer" msgstr "&Tiskárna" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:17 msgctxt "@label:category menu label" msgid "Network enabled printers" msgstr "Tiskárny s povolenou sítí" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:50 msgctxt "@label:category menu label" msgid "Local printers" msgstr "Lokální tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open &Recent" msgstr "Otevřít &Poslední" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SaveProjectMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Save Project..." msgstr "Uložit projekt..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:34 msgctxt "@title:menu" msgid "&Material" msgstr "&Materiál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49 msgctxt "@action:inmenu" msgid "Set as Active Extruder" msgstr "Nastavit jako aktivní extruder" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:55 msgctxt "@action:inmenu" msgid "Enable Extruder" msgstr "Povolit extuder" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:63 msgctxt "@action:inmenu" msgid "Disable Extruder" msgstr "Zakázat Extruder" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16 msgctxt "@action:inmenu" msgid "Visible Settings" msgstr "Viditelná nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 msgctxt "@action:inmenu" msgid "Collapse All Categories" msgstr "Sbalit všechny kategorie" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 msgctxt "@action:inmenu" msgid "Manage Setting Visibility..." msgstr "Spravovat nastavení viditelnosti ..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "Po&hled" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:17 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" msgstr "Pozice &kamery" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:30 msgctxt "@action:inmenu menubar:view" msgid "Camera view" msgstr "Pohled kamery" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:48 msgctxt "@action:inmenu menubar:view" msgid "Perspective" msgstr "Perspektiva" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" msgid "Orthographic" msgstr "Ortografický" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:115 msgctxt "@label:MonitorStatus" msgid "Not connected to a printer" msgstr "Nepřipojen k tiskárně" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119 msgctxt "@label:MonitorStatus" msgid "Printer does not accept commands" msgstr "Tiskárna nepřijímá příkazy" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:129 msgctxt "@label:MonitorStatus" msgid "In maintenance. Please check the printer" msgstr "V údržbě. Prosím zkontrolujte tiskíárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:140 msgctxt "@label:MonitorStatus" msgid "Lost connection with the printer" msgstr "Ztráta spojení s tiskárnou" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:142 msgctxt "@label:MonitorStatus" msgid "Printing..." msgstr "Tisknu..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:145 msgctxt "@label:MonitorStatus" msgid "Paused" msgstr "Pozastaveno" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:148 msgctxt "@label:MonitorStatus" msgid "Preparing..." msgstr "Připravuji..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:150 msgctxt "@label:MonitorStatus" msgid "Please remove the print" msgstr "Prosím odstraňte výtisk" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:318 msgctxt "@label" msgid "Abort Print" msgstr "Zrušit tisk" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:327 msgctxt "@label" msgid "Are you sure you want to abort the print?" msgstr "Jste si jist, že chcete zrušit tisknutí?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:109 msgctxt "@label" msgid "Is printed as support." msgstr "Je tisknuto jako podpora." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:112 msgctxt "@label" msgid "Other models overlapping with this model are modified." msgstr "Ostatní modely překrývající se s tímto modelem jsou upraveny." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:115 msgctxt "@label" msgid "Infill overlapping with this model is modified." msgstr "Výplň překrývající se s tímto modelem byla modifikována." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:118 msgctxt "@label" msgid "Overlaps with this model are not supported." msgstr "Přesahy na tomto modelu nejsou podporovány." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:125 msgctxt "@label %1 is the number of settings it overrides." msgid "Overrides %1 setting." msgid_plural "Overrides %1 settings." msgstr[0] "Přepíše %1 nastavení." msgstr[1] "Přepíše %1 nastavení." msgstr[2] "Přepíše %1 nastavení." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59 msgctxt "@label" msgid "Object list" msgstr "Seznam objektů" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:131 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:24 msgctxt "@action:button" msgid "Defaults" msgstr "Výchozí" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:169 msgctxt "@label" msgid "Interface" msgstr "Rozhranní" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:212 msgctxt "@heading" msgid "-- incomplete --" msgstr "-- nekompletní --" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:258 msgctxt "@label" msgid "Currency:" msgstr "Měna:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:274 msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed." msgid "Theme*:" msgstr "Styl*:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:320 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Slicovat automaticky při změně nastavení." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:328 msgctxt "@option:check" msgid "Slice automatically" msgstr "Slicovat automaticky" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:337 msgctxt "@label" msgid "*You will need to restart the application for these changes to have effect." msgstr "*Aby se tyto změny projevily, budete muset aplikaci restartovat." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:352 msgctxt "@label" msgid "Viewport behavior" msgstr "Chování výřezu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Zvýraznit červeně místa modelu bez podpor. Bez podpor tyto místa nebudou správně vytisknuta." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:369 msgctxt "@option:check" msgid "Display overhang" msgstr "Zobrazit převis" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "Zvýraznit chybějící nebo vedlejší povrchy modelu pomocí varovných značek. Dráhám nástrojů budou často chybět části zamýšlené geometrie." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388 msgctxt "@option:check" msgid "Display model errors" msgstr "Zobrazovat chyby modelu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:396 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "Při výběru modelu pohybuje kamerou tak, aby byl model ve středu pohledu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:401 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Vycentrovat kameru pokud je vybrána položka" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "Mělo by být výchozí chování přiblížení u cury invertováno?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Obrátit směr přibližování kamery." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "Mělo by se přibližování pohybovat ve směru myši?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "V pravoúhlé perspektivě není podporováno přiblížení směrem k myši." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:437 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Přiblížit směrem k směru myši" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Měly by se modely na platformě pohybovat tak, aby se již neprotínaly?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:468 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "Zajistěte, aby modely byly odděleny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:477 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "Měly by být modely na platformě posunuty dolů tak, aby se dotýkaly podložky?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:482 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Automaticky přetáhnout modely na podložku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:494 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "Zobrazte v čtečce g-kódu varovnou zprávu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "Upozornění ve čtečce G-kódu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:511 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "Měla by být vrstva vynucena do režimu kompatibility?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:516 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "Vynutit režim kompatibility zobrazení vrstev (vyžaduje restart)" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:526 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "Měla by se Cura otevřít v místě, kde byla uzavřena?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531 msgctxt "@option:check" msgid "Restore window position on start" msgstr "Při zapnutí obnovit pozici okna" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:541 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "Jaký typ kamery by se měl použít?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:548 msgctxt "@window:text" msgid "Camera rendering:" msgstr "Vykreslování kamery:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:555 msgid "Perspective" msgstr "Perspektiva" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:556 msgid "Orthographic" msgstr "Ortografický" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596 msgctxt "@label" msgid "Opening and saving files" msgstr "Otevírám a ukládám soubory" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:603 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "Měli by se soubory z plochy, nebo externích aplikací otevírat ve stejné instanci Cury?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:608 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "Používat pouze jednu instanci programu Cura" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619 msgctxt "@info:tooltip" msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?" msgstr "Má být podložka vyčištěna před načtením nového modelu v jediné instanci Cury?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:625 msgctxt "@option:check" msgid "Clear buildplate before loading model into the single instance" msgstr "Vyčistit podložku před načtením modelu do jediné instance" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "Měly by být modely upraveny na velikost podložky, pokud jsou příliš velké?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:640 msgctxt "@option:check" msgid "Scale large models" msgstr "Škálovat velké modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:650 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Model se může jevit velmi malý, pokud je jeho jednotka například v metrech, nikoli v milimetrech. Měly by být tyto modely škálovány?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:655 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Škálovat extrémně malé modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:665 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "Měly by být modely vybrány po načtení?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:670 msgctxt "@option:check" msgid "Select models when loaded" msgstr "Vybrat modely po načtení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "Je třeba k názvu tiskové úlohy přidat předponu založenou na názvu tiskárny automaticky?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:685 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Přidat předponu zařízení před název úlohy" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:695 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Mělo by se při ukládání souboru projektu zobrazit souhrn?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:699 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Zobrazit souhrnný dialog při ukládání projektu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Výchozí chování při otevírání souboru" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:717 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Výchozí chování při otevření souboru s projektem: " #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:732 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "Vždy se zeptat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Vždy otevírat jako projekt" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:734 msgctxt "@option:openProject" msgid "Always import models" msgstr "Vždy importovat modely" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Pokud jste provedli změny v profilu a přepnuli na jiný, zobrazí se dialogové okno s dotazem, zda si přejete zachovat své modifikace nebo ne, nebo si můžete zvolit výchozí chování a už nikdy toto dialogové okno nezobrazovat." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:36 msgctxt "@label" msgid "Profiles" msgstr "Profily" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:785 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "Výchozí chování pro změněné hodnoty nastavení při přepnutí na jiný profil: " #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:800 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "Vždy smazat změněné nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:801 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "Vždy přesunout nastavení do nového profilu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:835 msgctxt "@label" msgid "Privacy" msgstr "Soukromí" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:841 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Měla by být anonymní data o vašem tisku zaslána společnosti Ultimaker? Upozorňujeme, že nejsou odesílány ani ukládány žádné modely, adresy IP ani jiné osobní údaje." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:846 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "Posílat (anonymní) informace o tisku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:876 msgctxt "@label" msgid "Updates" msgstr "Aktualizace" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:883 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "Měla by Cura zkontrolovat aktualizace při spuštění programu?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:888 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Zkontrolovat aktualizace při zapnutí" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:904 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." msgstr "Při kontrole aktualizací kontrolovat pouze stabilní vydání." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:910 msgctxt "@option:radio" msgid "Stable releases only" msgstr "Pouze stabilní vydání" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:920 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." msgstr "Při kontrole aktualizací kontrolovat stabilní i beta vydání." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:926 msgctxt "@option:radio" msgid "Stable and Beta releases" msgstr "Stabilní a beta vydání" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:936 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" msgstr "Mají být při každém startu Cury automaticky kontrolovány nové moduly? Důrazně doporučujeme tuto možnost nevypínat!" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:941 msgctxt "@option:check" msgid "Get notifications for plugin updates" msgstr "Získávat oznámení o aktualizacích modulů" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:50 msgctxt "@action:button" msgid "Add New" msgstr "Přidat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:134 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:294 msgctxt "@action:button" msgid "Activate" msgstr "Aktivovat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:146 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:331 msgctxt "@action:button" msgid "Rename" msgstr "Přejmenovat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72 msgctxt "@label" msgid "Materials compatible with active printer:" msgstr "Materiály kompatibilní s aktivní tiskárnou:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:94 msgctxt "@action:button" msgid "Create new" msgstr "Vytvořit nový" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:88 msgctxt "@action:button" msgid "Import" msgstr "Import" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101 msgctxt "@action:button" msgid "Sync with Printers" msgstr "Synchronizovat s tiskárnami" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:311 msgctxt "@action:button" msgid "Duplicate" msgstr "Duplikovat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:342 msgctxt "@action:button" msgid "Export" msgstr "Export" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:392 msgctxt "@title:window" msgid "Confirm Remove" msgstr "Potvrdit odstranění" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:393 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "Doopravdy chcete odstranit %1? Toto nelze vrátit zpět!" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238 msgctxt "@title:window" msgid "Import Material" msgstr "Importovat materiál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "Úspěšně importován materiál %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" msgstr "Nelze importovat materiál %1: %2" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:267 msgctxt "@title:window" msgid "Export Material" msgstr "Exportovat materiál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:272 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" msgstr "Neúspěch při exportu materiálu do %1: %2" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:275 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" msgstr "Úspěšné exportování materiálu do %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18 msgctxt "@title:window" msgid "Sync materials with printers" msgstr "Synchronizovat materiály s tiskárnami" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49 msgctxt "@title:header" msgid "Sync materials with printers" msgstr "Synchronizovat materiály s tiskárnami" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55 msgctxt "@text" msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers." msgstr "Následováním několika jednoduchých kroků budete moci synchronizovat všechny vaše materiálové profily s vašimi tiskárnami." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77 msgctxt "@button" msgid "Why do I need to sync material profiles?" msgstr "K čemu je dobrá synchronizace materiálových profilů?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86 msgctxt "@button" msgid "Start" msgstr "Začít" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:128 msgctxt "@title:header" msgid "Sign in" msgstr "Přihlásit se" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:134 msgctxt "@text" msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura." msgstr "Pro automatickou synchronizaci materiálových profilů se všemi vašimi tiskárnami připojenými k Digital Factory musíte být přihlášení v Cuře." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:158 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:586 msgctxt "@button" msgid "Sync materials with USB" msgstr "Synchronizovat materiály pomocí USB" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:191 msgctxt "@title:header" msgid "The following printers will receive the new material profiles:" msgstr "Následující tiskárny získají nové materiálové profily:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:198 msgctxt "@title:header" msgid "Something went wrong when sending the materials to the printers." msgstr "Při odesílání materiálů do tiskáren se něco nepodařilo." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:205 msgctxt "@title:header" msgid "Material profiles successfully synced with the following printers:" msgstr "Materiálové profily byly úspěšně synchronizovány s následujícími tiskárnami:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429 msgctxt "@button" msgid "Troubleshooting" msgstr "Podpora při problémech" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406 msgctxt "@text Asking the user whether printers are missing in a list." msgid "Printers missing?" msgstr "Chybí tiskárny?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408 msgctxt "@text" msgid "Make sure all your printers are turned ON and connected to Digital Factory." msgstr "Ujistěte se, že jsou všechny vaše tiskárny zapnuté a připojené k Digital Factory." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417 msgctxt "@button" msgid "Refresh List" msgstr "Obnovit seznam" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457 msgctxt "@button" msgid "Try again" msgstr "Zkusit znovu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696 msgctxt "@button" msgid "Done" msgstr "Hotovo" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:606 msgctxt "@button" msgid "Sync" msgstr "Synchronizovat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519 msgctxt "@button" msgid "Syncing" msgstr "Synchronizuji" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537 msgctxt "@title:header" msgid "No printers found" msgstr "Nenalezeny žádné tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558 msgctxt "@text" msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware." msgstr "Zdá se, že nemáte žádné kompatibilní tiskárny připojené k Digital Factory. Ujistěte se, že je vaše tiskárna připojena a používá nejnovější firmware." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:569 msgctxt "@button" msgid "Learn how to connect your printer to Digital Factory" msgstr "Zjistěte, jak připojit vaši tiskárnu k Digital Factory" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:597 msgctxt "@button" msgid "Refresh" msgstr "Obnovit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:626 msgctxt "@title:header" msgid "Sync material profiles via USB" msgstr "Synchronizovat materiálové profily přes USB" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:632 msgctxt "@text In the UI this is followed by a list of steps the user needs to take." msgid "Follow the following steps to load the new material profiles to your printer." msgstr "Následujte tyto kroky, abyste nahráli nové materiálové profily do vaší tiskárny." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:663 msgctxt "@text" msgid "Click the export material archive button." msgstr "Klikněte na tlačítko \"Exportovat archiv s materiálem\"." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:664 msgctxt "@text" msgid "Save the .umm file on a USB stick." msgstr "Uložte soubor .umm na USB úložiště." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665 msgctxt "@text" msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles." msgstr "Připojte USB úložiště k vaší tiskárně a spusťte proceduru pro nahrání nových materiálových profilů." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:673 msgctxt "@button" msgid "How to load new material profiles to my printer" msgstr "Jak nahrát nové materiálové profily do mé tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:687 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:299 msgctxt "@button" msgid "Back" msgstr "Zpět" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696 msgctxt "@button" msgid "Export material archive" msgstr "Exportovat archiv s materiálem" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:731 msgctxt "@title:window" msgid "Export All Materials" msgstr "Exportovat všechny materiály" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121 msgctxt "@title:window" msgid "Confirm Diameter Change" msgstr "Potvrdit změnu průměru" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122 msgctxt "@label (%1 is a number)" msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" msgstr "Nový průměr vlákna je nastaven na %1 mm, což není kompatibilní s aktuálním extrudérem. Přejete si pokračovat?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152 msgctxt "@label" msgid "Display Name" msgstr "Jméno" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171 msgctxt "@label" msgid "Brand" msgstr "Značka" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190 msgctxt "@label" msgid "Material Type" msgstr "Typ materiálu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210 msgctxt "@label" msgid "Color" msgstr "Barva" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:262 msgctxt "@title" msgid "Material color picker" msgstr "Volba barvy materiálu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:275 msgctxt "@label" msgid "Properties" msgstr "Vlastnosti" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:286 msgctxt "@label" msgid "Density" msgstr "Husttoa" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:319 msgctxt "@label" msgid "Diameter" msgstr "Průměr" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:369 msgctxt "@label" msgid "Filament Cost" msgstr "Cena filamentu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:401 msgctxt "@label" msgid "Filament weight" msgstr "Váha filamentu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:433 msgctxt "@label" msgid "Filament length" msgstr "Délka filamentu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:451 msgctxt "@label" msgid "Cost per Meter" msgstr "Cena za metr" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:465 msgctxt "@label" msgid "This material is linked to %1 and shares some of its properties." msgstr "Tento materiál je propojen s %1 a sdílí některé jeho vlastnosti." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:472 msgctxt "@label" msgid "Unlink Material" msgstr "Zrušit propojení s materiálem" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:485 msgctxt "@label" msgid "Description" msgstr "Popis" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:503 msgctxt "@label" msgid "Adhesion Information" msgstr "Informace o adhezi" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642 msgctxt "@title" msgid "Information" msgstr "Informace" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:647 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:82 msgctxt "@label" msgid "Print settings" msgstr "Nastavení tisku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:59 msgctxt "@label" msgid "Profiles compatible with active printer:" msgstr "Profily kompatibilní s aktivní tiskárnou:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:98 msgctxt "@action:tooltip" msgid "Create new profile from current settings/overrides" msgstr "Vytvořit nový profil z aktuálních nastavení/přepsání" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:125 msgctxt "@action:label" msgid "Some settings from current profile were overwritten." msgstr "Některá nastavení z aktuálního profilu byla přepsána." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:140 msgctxt "@action:button" msgid "Update profile." msgstr "Aktualizovat profil." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:143 msgctxt "@action:tooltip" msgid "Update profile with current settings/overrides" msgstr "Aktualizovat profil s aktuálními nastaveními/přepsáními" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:148 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256 msgctxt "@action:button" msgid "Discard current changes" msgstr "Zrušit aktuální změny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:158 msgctxt "@action:label" msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." msgstr "Tento profil používá výchozí nastavení zadaná tiskárnou, takže nemá žádná nastavení / přepíše v níže uvedeném seznamu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:165 msgctxt "@action:label" msgid "Your current settings match the selected profile." msgstr "Vaše aktuální nastavení odpovídá vybranému profilu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:175 msgctxt "@title:tab" msgid "Global Settings" msgstr "Globální nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278 msgctxt "@title:window" msgid "Create Profile" msgstr "Vytvořit profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:280 msgctxt "@info" msgid "Please provide a name for this profile." msgstr "Prosím uveďte jméno pro tento profil." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:352 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:368 msgctxt "@title:window" msgid "Export Profile" msgstr "Exportovat profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:382 msgctxt "@title:window" msgid "Duplicate Profile" msgstr "Duplikovat profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:409 msgctxt "@title:window" msgid "Rename Profile" msgstr "Přejmenovat profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:422 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:429 msgctxt "@title:window" msgid "Import Profile" msgstr "Importovat profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:22 msgctxt "@title:window" msgid "Rename" msgstr "Přejmenovat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:23 msgctxt "@info" msgid "Please provide a new name." msgstr "Prosím uveďte nové jméno." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56 msgctxt "@item:tooltip" msgid "This setting has been hidden by the active machine and will not be visible." msgstr "Toto nastavení bylo skryto aktivním zařízením a nebude viditelné." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73 msgctxt "@item:tooltip %1 is list of setting names" msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible." msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible." msgstr[0] "Toto nastavení bylo skryto hodnotou nastavení %1. Změňte hodnotu toho nastavení, aby bylo toto znovu viditelné." msgstr[1] "Toto nastavení bylo skryto hodnotami nastavení %1. Změňte hodnoty těch nastavení, aby bylo toto znovu viditelné." msgstr[2] "Toto nastavení bylo skryto hodnotami nastavení %1. Změňte hodnoty těch nastavení, aby bylo toto znovu viditelné." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13 msgctxt "@title:tab" msgid "Setting Visibility" msgstr "Nastavení zobrazení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:55 msgctxt "@label:textbox" msgid "Check all" msgstr "Zkontrolovat vše" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40 msgctxt "@label" msgid "Extruder" msgstr "Extuder" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." msgstr "Cílová teplota hotendu. Hotend se ohřeje nebo ochladí na tuto teplotu. Pokud je 0, ohřev teplé vody je vypnutý." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "Aktuální teplota tohoto hotendu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "Teplota pro předehřátí hotendu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Zrušit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263 msgctxt "@button" msgid "Pre-heat" msgstr "Předehřání" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297 msgctxt "@tooltip of pre-heat" msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." msgstr "Před tiskem zahřejte hotend předem. Můžete pokračovat v úpravách tisku, zatímco se zahřívá, a nemusíte čekat na zahřátí hotendu, až budete připraveni k tisku." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "Barva materiálu v tomto extruderu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "Materiál v tomto extruderu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "Vložená trysky v tomto extruderu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25 msgctxt "@label" msgid "Build plate" msgstr "Podložka" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55 msgctxt "@tooltip" msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." msgstr "Cílová teplota vyhřívací podložky. Podložka se zahřeje, nebo schladí směrem k této teplotě. Pokud je 0, tak je vyhřívání podložky vypnuto." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "Aktuální teplota vyhřívané podložky." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "Teplota pro předehřátí podložky." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286 msgctxt "@tooltip of pre-heat" msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." msgstr "Před tiskem zahřejte postel předem. Můžete pokračovat v úpravě tisku, zatímco se zahřívá, a nemusíte čekat, až se postel zahřeje, až budete připraveni k tisku." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51 msgctxt "@label" msgid "Printer control" msgstr "Ovládání tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66 msgctxt "@label" msgid "Jog Position" msgstr "Pozice hlavy" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82 msgctxt "@label" msgid "X/Y" msgstr "X/Y" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162 msgctxt "@label" msgid "Z" msgstr "Z" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217 msgctxt "@label" msgid "Jog Distance" msgstr "Vzdálenost hlavy" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Send G-code" msgstr "Poslat G kód" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319 msgctxt "@tooltip of G-code command input" msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." msgstr "Na připojenou tiskárnu odešlete vlastní příkaz G-kódu. Stisknutím klávesy „Enter“ odešlete příkaz." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 msgctxt "@info:status" msgid "The printer is not connected." msgstr "Tiskárna není připojena." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 msgctxt "@status" msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." msgstr "Cloudová tiskárna je offline. Prosím zkontrolujte, zda je tiskárna zapnutá a připojená k internetu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 msgctxt "@status" msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." msgstr "Tiskárna není připojena k vašemu účtu. Prosím navštivte Ultimaker Digital Factory pro navázání spojení." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." msgstr "Připojení ke cloudu není nyní dostupné. Prosím přihlašte se k připojení ke cloudové tiskárně." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please check your internet connection." msgstr "Připojení ke cloudu není nyní dostupné. Prosím zkontrolujte si vaše internetové připojení." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:235 msgctxt "@button" msgid "Add printer" msgstr "Přidat tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252 msgctxt "@button" msgid "Manage printers" msgstr "Spravovat tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156 msgctxt "@label" msgid "Active print" msgstr "Aktivní tisk" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164 msgctxt "@label" msgid "Job Name" msgstr "Název úlohy" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:172 msgctxt "@label" msgid "Printing Time" msgstr "Čas tisku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:180 msgctxt "@label" msgid "Estimated time left" msgstr "Předpokládaný zbývající čas" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46 msgctxt "@label" msgid "Profile" msgstr "Profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:145 msgctxt "@tooltip" msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." msgstr "" "Některé hodnoty nastavení / přepsání se liší od hodnot uložených v profilu.\n" "\n" "Klepnutím otevřete správce profilů." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158 msgctxt "@label:header" msgid "Custom profiles" msgstr "Vlastní profily" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20 msgctxt "@label shown when we load a Gcode file" msgid "Print setup disabled. G-code file can not be modified." msgstr "Nastavení tisku zakázáno. Soubor G-kódu nelze změnit." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:142 msgctxt "@button" msgid "Recommended" msgstr "Doporučeno" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:156 msgctxt "@button" msgid "Custom" msgstr "Vlastní" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 msgctxt "@label:Should be short" msgid "On" msgstr "Zap" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 msgctxt "@label:Should be short" msgid "Off" msgstr "Vyp" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34 msgctxt "@label" msgid "Experimental" msgstr "Experimentální" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:54 msgctxt "@info" msgid "custom profile is active and you overwrote some settings." msgstr "– vlastní profil je aktivní a přepsali jste některá nastavení." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:68 msgctxt "@info" msgid "custom profile is overriding some settings." msgstr "– vlastní profil přepisuje některá nastavení." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:79 msgctxt "@info" msgid "Some settings were changed." msgstr "Některá nastavení byly změněna." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27 msgctxt "@label" msgid "Adhesion" msgstr "Adheze" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72 msgctxt "@label" msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." msgstr "Umožňuje tisk okraje nebo voru. Tímto způsobem se kolem nebo pod objekt přidá plochá oblast, kterou lze snadno odříznout." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:198 msgctxt "@label" msgid "Gradual infill" msgstr "Postupná výplň" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:236 msgctxt "@label" msgid "Gradual infill will gradually increase the amount of infill towards the top." msgstr "Postupná výplň postupně zvyšuje množství výplně směrem nahoru." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:26 msgctxt "@label" msgid "Resolution" msgstr "Rozlišení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28 msgctxt "@label" msgid "Support" msgstr "Podpora" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69 msgctxt "@label" msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." msgstr "Vytvořte struktury pro podporu částí modelu, které mají přesahy. Bez těchto struktur by se takové části během tisku zhroutily." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31 msgctxt "@error" msgid "Configuration not supported" msgstr "Konfigurace není podporována" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39 msgctxt "@message:text %1 is the name the printer uses for 'nozzle'." msgid "No profiles are available for the selected material/%1 configuration. Please change your configuration." msgstr "Pro vybranou konfiguraci materiál/%1 není dostupný žádný profil. Prosím změňte svou konfiguraci." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47 msgctxt "@button:label" msgid "Learn more" msgstr "Zjistit více" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:36 msgctxt "@title:column" msgid "Setting" msgstr "Nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:37 msgctxt "@title:column" msgid "Profile" msgstr "Profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:38 msgctxt "@title:column" msgid "Current" msgstr "Aktuální" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:39 msgctxt "@title:column Unit of measurement" msgid "Unit" msgstr "Jednotka" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/SearchBar.qml:17 msgctxt "@placeholder" msgid "Search" msgstr "Hledat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:115 msgctxt "@label" msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." msgstr "" "Některá skrytá nastavení používají hodnoty odlišné od jejich normální vypočtené hodnoty.\n" "\n" "Klepnutím toto nastavení zviditelníte." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:84 msgctxt "@label" msgid "This setting is not used because all the settings that it influences are overridden." msgstr "Toto nastavení se nepoužívá, protože všechna nastavení, která ovlivňuje, jsou přepsána." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:89 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "Ovlivňuje" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:94 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "Ovlivněno" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:190 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." msgstr "Toto nastavení je vždy sdíleno všemi extrudéry. Jeho změnou se změní hodnota všech extruderů." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:194 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "Toto nastavení je vyřešeno z konfliktních hodnot specifického extruder:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:234 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." msgstr "" "Toto nastavení má jinou hodnotu než profil.\n" "\n" "Klepnutím obnovíte hodnotu profilu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:334 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." msgstr "" "Toto nastavení se obvykle počítá, ale v současné době je nastavena absolutní hodnota.\n" "\n" "Klepnutím obnovíte vypočítanou hodnotu." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:48 msgctxt "@label:textbox" msgid "Search settings" msgstr "Prohledat nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:395 msgctxt "@action:menu" msgid "Copy value to all extruders" msgstr "Kopírovat hodnotu na všechny extrudery" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:404 msgctxt "@action:menu" msgid "Copy all changed values to all extruders" msgstr "Kopírovat všechny změněné hodnoty na všechny extrudery" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:440 msgctxt "@action:menu" msgid "Hide this setting" msgstr "Schovat toto nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:453 msgctxt "@action:menu" msgid "Don't show this setting" msgstr "Neukazovat toto nastavení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:457 msgctxt "@action:menu" msgid "Keep this setting visible" msgstr "Nechat toto nastavení viditelné" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:25 msgctxt "@info:tooltip" msgid "3D View" msgstr "3D Pohled" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:38 msgctxt "@info:tooltip" msgid "Front View" msgstr "Přední pohled" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:51 msgctxt "@info:tooltip" msgid "Top View" msgstr "Pohled seshora" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:64 msgctxt "@info:tooltip" msgid "Left View" msgstr "Pohled zleva" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:77 msgctxt "@info:tooltip" msgid "Right View" msgstr "Pohled zprava" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50 msgctxt "@label" msgid "View type" msgstr "Typ pohledu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" msgid "Add a Cloud printer" msgstr "Přidat Cloudovou tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:73 msgctxt "@label" msgid "Waiting for Cloud response" msgstr "Čekám na odpověď od Cloudu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:83 msgctxt "@label" msgid "No printers found in your account?" msgstr "Žádné tiskárny nenalezeny ve vašem účtě?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:117 msgctxt "@label" msgid "The following printers in your account have been added in Cura:" msgstr "Následující tiskárny ve vašem účtě byla přidány do Cury:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:186 msgctxt "@button" msgid "Add printer manually" msgstr "Přidat tiskárnu manuálně" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203 msgctxt "@label" msgid "Manufacturer" msgstr "Výrobce" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214 msgctxt "@label" msgid "Profile author" msgstr "Autor profilu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226 msgctxt "@label" msgid "Printer name" msgstr "Název tiskárny" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232 msgctxt "@text" msgid "Please name your printer" msgstr "Pojmenujte prosím svou tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 msgctxt "@label" msgid "Add a printer" msgstr "Přidat tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:38 msgctxt "@label" msgid "Add a networked printer" msgstr "Přidat síťovou tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:87 msgctxt "@label" msgid "Add a non-networked printer" msgstr "Přidat ne-síťovou tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 msgctxt "@label" msgid "There is no printer found over your network." msgstr "Přes síť nebyla nalezena žádná tiskárna." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162 msgctxt "@label" msgid "Refresh" msgstr "Obnovit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173 msgctxt "@label" msgid "Add printer by IP" msgstr "Přidat tiskárnu podle IP" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184 msgctxt "@label" msgid "Add cloud printer" msgstr "Přidat cloudovou tiskárnu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:220 msgctxt "@label" msgid "Troubleshooting" msgstr "Podpora při problémech" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" msgid "Add printer by IP address" msgstr "Přidat tiskárnu podle IP adresy" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:128 msgctxt "@text" msgid "Enter your printer's IP address." msgstr "Zadejte IP adresu vaší tiskárny." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:150 msgctxt "@button" msgid "Add" msgstr "Přidat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:195 msgctxt "@label" msgid "Could not connect to device." msgstr "Nelze se připojit k zařízení." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:196 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:201 msgctxt "@label" msgid "Can't connect to your Ultimaker printer?" msgstr "Nemůžete se připojit k Vaší tiskárně Ultimaker?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:200 msgctxt "@label" msgid "The printer at this address has not responded yet." msgstr "Tiskárna na této adrese dosud neodpověděla." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:231 msgctxt "@label" msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." msgstr "Tuto tiskárnu nelze přidat, protože se jedná o neznámou tiskárnu nebo není hostitelem skupiny." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:312 msgctxt "@button" msgid "Connect" msgstr "Připojit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24 msgctxt "@label" msgid "Release Notes" msgstr "Poznámky k vydání" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:123 msgctxt "@text" msgid "Add material settings and plugins from the Marketplace" msgstr "Přidat nastavení materiálů a moduly z Obchodu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:149 msgctxt "@text" msgid "Backup and sync your material settings and plugins" msgstr "Zálohovat a synchronizovat nastavení materiálů a moduly" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:175 msgctxt "@text" msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community" msgstr "Sdílejte nápady a získejte pomoc od více než 48 0000 uživatelů v Ultimaker komunitě" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:189 msgctxt "@button" msgid "Skip" msgstr "Přeskočit" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:201 msgctxt "@text" msgid "Create a free Ultimaker Account" msgstr "Vytvořit účet Ultimaker zdarma" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 msgctxt "@label" msgid "Help us to improve Ultimaker Cura" msgstr "Pomožte nám zlepšovat Ultimaker Cura" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:56 msgctxt "@text" msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" msgstr "Ultimaker Cura shromažďuje anonymní data za účelem zlepšení kvality tisku a uživatelského komfortu, včetně:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:68 msgctxt "@text" msgid "Machine types" msgstr "Typy zařízení" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:74 msgctxt "@text" msgid "Material usage" msgstr "Použití materiálu" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:80 msgctxt "@text" msgid "Number of slices" msgstr "Počet sliců" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:86 msgctxt "@text" msgid "Print settings" msgstr "Nastavení tisku" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:99 msgctxt "@text" msgid "Data collected by Ultimaker Cura will not contain any personal information." msgstr "Data shromážděná společností Ultimaker Cura nebudou obsahovat žádné osobní údaje." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:100 msgctxt "@text" msgid "More information" msgstr "Více informací" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 msgctxt "@label" msgid "Empty" msgstr "Prázdné" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 msgctxt "@label" msgid "User Agreement" msgstr "Uživatelská dohoda" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67 msgctxt "@button" msgid "Decline and close" msgstr "Odmítnout a zavřít" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56 msgctxt "@label" msgid "Welcome to Ultimaker Cura" msgstr "Vítejte v Ultimaker Cura" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:67 msgctxt "@text" msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments." msgstr "Při nastavování postupujte podle těchto pokynů Ultimaker Cura. Bude to trvat jen několik okamžiků." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:82 msgctxt "@button" msgid "Get started" msgstr "Začínáme" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28 msgctxt "@label" msgid "What's New" msgstr "Co je nového" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Widgets/ComboBox.qml:18 msgctxt "@label" msgid "No items to select from" msgstr "Není z čeho vybírat" #: ModelChecker/plugin.json msgctxt "description" msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "Zkontroluje možné tiskové modely a konfiguraci tisku a poskytne návrhy." #: ModelChecker/plugin.json msgctxt "name" msgid "Model Checker" msgstr "Kontroler modelu" #: 3MFReader/plugin.json msgctxt "description" msgid "Provides support for reading 3MF files." msgstr "Poskytuje podporu pro čtení souborů 3MF." #: 3MFReader/plugin.json msgctxt "name" msgid "3MF Reader" msgstr "Čtečka 3MF" #: 3MFWriter/plugin.json msgctxt "description" msgid "Provides support for writing 3MF files." msgstr "Poskytuje podporu pro psaní souborů 3MF." #: 3MFWriter/plugin.json msgctxt "name" msgid "3MF Writer" msgstr "Zapisovač 3MF" #: AMFReader/plugin.json msgctxt "description" msgid "Provides support for reading AMF files." msgstr "Poskytuje podporu pro čtení souborů AMF." #: AMFReader/plugin.json msgctxt "name" msgid "AMF Reader" msgstr "Čtečka AMF" #: CuraDrive/plugin.json msgctxt "description" msgid "Backup and restore your configuration." msgstr "Zálohujte a obnovte konfiguraci." #: CuraDrive/plugin.json msgctxt "name" msgid "Cura Backups" msgstr "Cura zálohy" #: CuraEngineBackend/plugin.json msgctxt "description" msgid "Provides the link to the CuraEngine slicing backend." msgstr "Poskytuje odkaz na backend krájení CuraEngine." #: CuraEngineBackend/plugin.json msgctxt "name" msgid "CuraEngine Backend" msgstr "CuraEngine Backend" #: CuraProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing Cura profiles." msgstr "Poskytuje podporu pro import profilů Cura." #: CuraProfileReader/plugin.json msgctxt "name" msgid "Cura Profile Reader" msgstr "Čtečka Cura profilu" #: CuraProfileWriter/plugin.json msgctxt "description" msgid "Provides support for exporting Cura profiles." msgstr "Poskytuje podporu pro export profilů Cura." #: CuraProfileWriter/plugin.json msgctxt "name" msgid "Cura Profile Writer" msgstr "Zapisovač Cura profilu" #: DigitalLibrary/plugin.json msgctxt "description" msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." msgstr "Připojuje k Digitální knihovně. Umožňuje Cuře otevírat a ukládat soubory z a do Digitální knihovny." #: DigitalLibrary/plugin.json msgctxt "name" msgid "Ultimaker Digital Library" msgstr "Digitální knihovna Ultimaker" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." msgstr "Zkontroluje dostupné aktualizace firmwaru." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" msgstr "Kontroler aktualizace firmwaru" #: FirmwareUpdater/plugin.json msgctxt "description" msgid "Provides a machine actions for updating firmware." msgstr "Poskytuje akce počítače pro aktualizaci firmwaru." #: FirmwareUpdater/plugin.json msgctxt "name" msgid "Firmware Updater" msgstr "Firmware Updater" #: GCodeGzReader/plugin.json msgctxt "description" msgid "Reads g-code from a compressed archive." msgstr "Čte g-kód z komprimovaného archivu." #: GCodeGzReader/plugin.json msgctxt "name" msgid "Compressed G-code Reader" msgstr "Čtečka kompresovaného G kódu" #: GCodeGzWriter/plugin.json msgctxt "description" msgid "Writes g-code to a compressed archive." msgstr "Zapíše g-kód do komprimovaného archivu." #: GCodeGzWriter/plugin.json msgctxt "name" msgid "Compressed G-code Writer" msgstr "Zapisova kompresovaného G kódu" #: GCodeProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from g-code files." msgstr "Poskytuje podporu pro import profilů ze souborů g-kódu." #: GCodeProfileReader/plugin.json msgctxt "name" msgid "G-code Profile Reader" msgstr "Čtečka profilu G kódu" #: GCodeReader/plugin.json msgctxt "description" msgid "Allows loading and displaying G-code files." msgstr "Povoluje načítání a zobrazení souborů G kódu." #: GCodeReader/plugin.json msgctxt "name" msgid "G-code Reader" msgstr "Čtečka G kódu" #: GCodeWriter/plugin.json msgctxt "description" msgid "Writes g-code to a file." msgstr "Zapisuje G kód o souboru." #: GCodeWriter/plugin.json msgctxt "name" msgid "G-code Writer" msgstr "Zapisovač G kódu" #: ImageReader/plugin.json msgctxt "description" msgid "Enables ability to generate printable geometry from 2D image files." msgstr "Umožňuje generovat tiskovou geometrii ze 2D obrazových souborů." #: ImageReader/plugin.json msgctxt "name" msgid "Image Reader" msgstr "Čtečka obrázků" #: LegacyProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from legacy Cura versions." msgstr "Poskytuje podporu pro import profilů ze starších verzí Cura." #: LegacyProfileReader/plugin.json msgctxt "name" msgid "Legacy Cura Profile Reader" msgstr "Čtečka legacy Cura profilu" #: MachineSettingsAction/plugin.json msgctxt "description" msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." msgstr "Poskytuje způsob, jak změnit nastavení zařízení (například objem sestavení, velikost trysek atd.)." #: MachineSettingsAction/plugin.json msgctxt "name" msgid "Machine Settings Action" msgstr "Akce nastavení zařízení" #: Marketplace/plugin.json msgctxt "description" msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website." msgstr "Spravuje rozšíření aplikace a umožňuje prohlížení rozšíření z webu Ultimaker." #: Marketplace/plugin.json msgctxt "name" msgid "Marketplace" msgstr "Obchod" #: MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." msgstr "Poskytuje monitorovací scénu v Cuře." #: MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" msgstr "Fáze monitoringu" #: PerObjectSettingsTool/plugin.json msgctxt "description" msgid "Provides the Per Model Settings." msgstr "Umožňuje nastavení pro každý model." #: PerObjectSettingsTool/plugin.json msgctxt "name" msgid "Per Model Settings Tool" msgstr "Nástroj pro nastavení pro každý model" #: PostProcessingPlugin/plugin.json msgctxt "description" msgid "Extension that allows for user created scripts for post processing" msgstr "Rozšíření, které umožňuje uživateli vytvořené skripty pro následné zpracování" #: PostProcessingPlugin/plugin.json msgctxt "name" msgid "Post Processing" msgstr "Post Processing" #: PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." msgstr "Poskytuje přípravnou fázi v Cuře." #: PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" msgstr "Fáze přípravy" #: PreviewStage/plugin.json msgctxt "description" msgid "Provides a preview stage in Cura." msgstr "Poskytuje fázi náhledu v Cura." #: PreviewStage/plugin.json msgctxt "name" msgid "Preview Stage" msgstr "Fáze náhledu" #: RemovableDriveOutputDevice/plugin.json msgctxt "description" msgid "Provides removable drive hotplugging and writing support." msgstr "Poskytuje vyměnitelnou jednotku za plného zapojení a podporu zápisu." #: RemovableDriveOutputDevice/plugin.json msgctxt "name" msgid "Removable Drive Output Device Plugin" msgstr "Vyměnitelný zásuvný modul pro výstupní zařízení" #: SentryLogger/plugin.json msgctxt "description" msgid "Logs certain events so that they can be used by the crash reporter" msgstr "Protokolová určité události, aby je mohl použít reportér havárií" #: SentryLogger/plugin.json msgctxt "name" msgid "Sentry Logger" msgstr "Záznamník hlavy" #: SimulationView/plugin.json msgctxt "description" msgid "Provides the preview of sliced layerdata." msgstr "Poskytuje náhled slicovaných dat vrstev." #: SimulationView/plugin.json msgctxt "name" msgid "Simulation View" msgstr "Pohled simulace" #: SliceInfoPlugin/plugin.json msgctxt "description" msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "Odešle anonymní informace o slicování. Lze deaktivovat pomocí preferencí." #: SliceInfoPlugin/plugin.json msgctxt "name" msgid "Slice info" msgstr "Informace o slicování" #: SolidView/plugin.json msgctxt "description" msgid "Provides a normal solid mesh view." msgstr "Poskytuje normální zobrazení pevné sítě." #: SolidView/plugin.json msgctxt "name" msgid "Solid View" msgstr "Solid View" #: SupportEraser/plugin.json msgctxt "description" msgid "Creates an eraser mesh to block the printing of support in certain places" msgstr "Vytvoří gumovou síť, která blokuje tisk podpory na určitých místech" #: SupportEraser/plugin.json msgctxt "name" msgid "Support Eraser" msgstr "Mazač podpor" #: TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." msgstr "Poskytuje podporu pro čtení souborů modelu." #: TrimeshReader/plugin.json msgctxt "name" msgid "Trimesh Reader" msgstr "Čtečka trimesh" #: UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." msgstr "Poskytuje podporu pro čtení balíčků formátu Ultimaker." #: UFPReader/plugin.json msgctxt "name" msgid "UFP Reader" msgstr "Čtečka UFP" #: UFPWriter/plugin.json msgctxt "description" msgid "Provides support for writing Ultimaker Format Packages." msgstr "Poskytuje podporu pro psaní balíčků formátu Ultimaker." #: UFPWriter/plugin.json msgctxt "name" msgid "UFP Writer" msgstr "Zapisovač UFP" #: UltimakerMachineActions/plugin.json msgctxt "description" msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." msgstr "Poskytuje akce strojů pro stroje Ultimaker (jako je průvodce vyrovnáváním postele, výběr upgradů atd.)." #: UltimakerMachineActions/plugin.json msgctxt "name" msgid "Ultimaker machine actions" msgstr "Akce zařízení Ultimaker" #: UM3NetworkPrinting/plugin.json msgctxt "description" msgid "Manages network connections to Ultimaker networked printers." msgstr "Spravuje síťová připojení k síťovým tiskárnám Ultimaker." #: UM3NetworkPrinting/plugin.json msgctxt "name" msgid "Ultimaker Network Connection" msgstr "Síťové připojení Ultimaker" #: USBPrinting/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "Přijme G-kód a odešle je do tiskárny. Plugin může také aktualizovat firmware." #: USBPrinting/plugin.json msgctxt "name" msgid "USB printing" msgstr "USB tisk" #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "Aktualizuje konfigurace z Cura 2.1 na Cura 2.2." #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" msgid "Version Upgrade 2.1 to 2.2" msgstr "Aktualizace verze 2.1 na 2.2" #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "Aktualizuje konfigurace z Cura 2.2 na Cura 2.4." #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "Aktualizace verze 2.2 na 2.4" #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "Aktualizuje konfigurace z Cura 2.5 na Cura 2.6." #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" msgid "Version Upgrade 2.5 to 2.6" msgstr "Aktualizace verze 2.5 na 2.6" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "Aktualizuje konfigurace z Cura 2.6 na Cura 2.7." #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" msgid "Version Upgrade 2.6 to 2.7" msgstr "Aktualizace verze 2.6 na 2.7" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "Aktualizuje konfigurace z Cura 2.7 na Cura 3.0." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "Aktualizace verze 2.7 na 3.0" #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "Aktualizuje konfigurace z Cura 3.0 na Cura 3.1." #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" msgid "Version Upgrade 3.0 to 3.1" msgstr "Aktualizace verze 3.0 na 3.1" #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "Aktualizuje konfigurace z Cura 3.2 na Cura 3.3." #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "Aktualizace verze 3.2 na 3.3" #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "Aktualizuje konfigurace z Cura 3.3 na Cura 3.4." #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "Aktualizace verze 3.3 na 3.4" #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "Aktualizuje konfigurace z Cura 3.4 na Cura 3.5." #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "Aktualizace verze 3.4 na 3.5" #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "Aktualizuje konfigurace z Cura 3.5 na Cura 4.0." #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" msgid "Version Upgrade 3.5 to 4.0" msgstr "Aktualizace verze 3.5 na 4.0" #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "Aktualizuje konfigurace z Cura 4.0 na Cura 4.1." #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" msgid "Version Upgrade 4.0 to 4.1" msgstr "Aktualizace verze 4.0 na 4.1" #: VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." msgstr "Aktualizuje konfigurace z Cura 4.11 na Cura 4.12." #: VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "name" msgid "Version Upgrade 4.11 to 4.12" msgstr "Aktualizace verze 4.11 na 4.12" #: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." msgstr "Aktualizuje konfigurace z Cura 4.13 na Cura 5.0." #: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "name" msgid "Version Upgrade 4.13 to 5.0" msgstr "Aktualizace verze 4.13 na 5.0" #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "Aktualizuje konfigurace z Cura 4.1 na Cura 4.2." #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" msgid "Version Upgrade 4.1 to 4.2" msgstr "Aktualizace verze 4.1 na 4.2" #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "Aktualizuje konfigurace z Cura 4.2 na Cura 4.3." #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" msgid "Version Upgrade 4.2 to 4.3" msgstr "Aktualizace verze 4.2 na 4.3" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "Aktualizuje konfigurace z Cura 4.3 na Cura 4.4." #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" msgid "Version Upgrade 4.3 to 4.4" msgstr "Aktualizace verze 4.3 na 4.4" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "Aktualizuje konfigurace z Cura 4.4 na Cura 4.5." #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" msgid "Version Upgrade 4.4 to 4.5" msgstr "Aktualizace verze 4.4 na 4.5" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "Aktualizuje konfigurace z Cura 4.5 na Cura 4.6." #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" msgid "Version Upgrade 4.5 to 4.6" msgstr "Aktualizace verze 4.5 na 4.6" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "Aktualizuje konfigurace z Cura 4.6.0 na Cura 4.6.2." #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "Aktualizace verze 4.6.0 na 4.6.2" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "Aktualizuje konfigurace z Cura 4.6.2 na Cura 4.7." #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.2 to 4.7" msgstr "Aktualizace verze 4.6.2 na 4.7" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "Aktualizuje konfigurace z Cura 4.7 na Cura 4.8." #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" msgid "Version Upgrade 4.7 to 4.8" msgstr "Aktualizace verze 4.7 na 4.8" #: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." msgstr "Aktualizuje konfigurace z Cura 4.8 na Cura 4.9." #: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "name" msgid "Version Upgrade 4.8 to 4.9" msgstr "Aktualizace verze 4.8 na 4.9" #: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "Aktualizuje konfigurace z Cura 4.9 na Cura 4.10." #: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "name" msgid "Version Upgrade 4.9 to 4.10" msgstr "Aktualizace verze 4.9 na 4.10" #: X3DReader/plugin.json msgctxt "description" msgid "Provides support for reading X3D files." msgstr "Poskytuje podporu pro čtení souborů X3D." #: X3DReader/plugin.json msgctxt "name" msgid "X3D Reader" msgstr "Čtečka X3D" #: XmlMaterialProfile/plugin.json msgctxt "description" msgid "Provides capabilities to read and write XML-based material profiles." msgstr "Poskytuje funkce pro čtení a zápis materiálových profilů založených na XML." #: XmlMaterialProfile/plugin.json msgctxt "name" msgid "Material Profiles" msgstr "Materiálové profily" #: XRayView/plugin.json msgctxt "description" msgid "Provides the X-Ray view." msgstr "Poskytuje rentgenové zobrazení." #: XRayView/plugin.json msgctxt "name" msgid "X-Ray View" msgstr "Rentgenový pohled" #~ msgctxt "@label" #~ msgid "Not yet initialized
    " #~ msgstr "Neinicializováno
    " #~ msgctxt "@label" #~ msgid "By" #~ msgstr "Od" #~ msgctxt "@Label" #~ msgid "Static type checker for Python" #~ msgstr "Kontrola statických typů pro Python" #~ msgctxt "@Label" #~ msgid "Root Certificates for validating SSL trustworthiness" #~ msgstr "Základní certifikáty pro validaci důvěryhodnosti SSL" #~ msgctxt "@label" #~ msgid "Python extensions for Microsoft Windows" #~ msgstr "Python rozšíření pro Microsoft Windows" #~ msgctxt "@label" #~ msgid "SVG icons" #~ msgstr "Ikony SVG" #~ msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" #~ msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" #~ msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" #~ msgstr[0] "Neexistuje žádný profil %1 pro konfiguraci v extruderu %2. Místo toho bude použit výchozí záměr" #~ msgstr[1] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr" #~ msgstr[2] "Neexistuje žádný profil %1 pro konfigurace v extruderu %2. Místo toho bude použit výchozí záměr" #~ msgctxt "@tooltip" #~ msgid "You have modified some profile settings. If you want to change these go to custom mode." #~ msgstr "Upravili jste některá nastavení profilu. Pokud je chcete změnit, přejděte do uživatelského režimu." #~ msgctxt "@action:button" #~ msgid "Sync materials with printers" #~ msgstr "Synchronizovat materiály s tiskárnami" #~ msgctxt "@title:window" #~ msgid "Convert Image..." #~ msgstr "Konvertovat obrázek.." #~ msgctxt "@info:tooltip" #~ msgid "The width in millimeters on the build plate." #~ msgstr "Šířka podložky v milimetrech." #~ msgctxt "@title" #~ msgid "Marketplace" #~ msgstr "Obchod" #~ msgctxt "@info" #~ msgid "You will need to restart Cura before changes in packages have effect." #~ msgstr "Než se změny v balíčcích projeví, budete muset restartovat Curu." #~ msgctxt "@action:button" #~ msgid "Install" #~ msgstr "Nainstalovat" #~ msgctxt "@action:button" #~ msgid "Installed" #~ msgstr "Nainstalováno" #~ msgctxt "@label" #~ msgid "Premium" #~ msgstr "Premium" #~ msgctxt "@info:tooltip" #~ msgid "Go to Web Marketplace" #~ msgstr "Přejít na webový obchod" #~ msgctxt "@label" #~ msgid "Search materials" #~ msgstr "Hledat materiály" #~ msgctxt "@label" #~ msgid "Compatibility" #~ msgstr "Kompatibilita" #~ msgctxt "@label:table_header" #~ msgid "Machine" #~ msgstr "Zařízení" #~ msgctxt "@label:table_header" #~ msgid "Build Plate" #~ msgstr "Podložka" #~ msgctxt "@label:table_header" #~ msgid "Support" #~ msgstr "Podpora" #~ msgctxt "@label:table_header" #~ msgid "Quality" #~ msgstr "Kvalita" #~ msgctxt "@action:label" #~ msgid "Technical Data Sheet" #~ msgstr "Technický datasheet" #~ msgctxt "@action:label" #~ msgid "Safety Data Sheet" #~ msgstr "Datasheet bezpečnosti" #~ msgctxt "@action:label" #~ msgid "Printing Guidelines" #~ msgstr "Zásady tisku" #~ msgctxt "@action:label" #~ msgid "Website" #~ msgstr "Webová stránka" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Log in is required to install or update" #~ msgstr "K instalaci nebo aktualizaci je vyžadováno přihlášení" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Buy material spools" #~ msgstr "Koupit cívky materiálu" #~ msgctxt "@action:button" #~ msgid "Update" #~ msgstr "Aktualizace" #~ msgctxt "@action:button" #~ msgid "Updating" #~ msgstr "Aktualizuji" #~ msgctxt "@action:button" #~ msgid "Updated" #~ msgstr "Aktualizování" #~ msgctxt "@action:button" #~ msgid "Back" #~ msgstr "Zpět" #~ msgctxt "@title:tab" #~ msgid "Plugins" #~ msgstr "Zásuvné moduly" #~ msgctxt "@title:tab" #~ msgid "Installed" #~ msgstr "Nainstalování" #~ msgctxt "@label" #~ msgid "Will install upon restarting" #~ msgstr "Nainstaluje se po restartu" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Log in is required to update" #~ msgstr "Pro aktualizace je potřeba se přihlásit" #~ msgctxt "@action:button" #~ msgid "Downgrade" #~ msgstr "Downgrade" #~ msgctxt "@action:button" #~ msgid "Uninstall" #~ msgstr "Odinstalace" #~ msgctxt "@label" #~ msgid "Community Contributions" #~ msgstr "Soubory od komunity" #~ msgctxt "@label" #~ msgid "Community Plugins" #~ msgstr "Komunitní zásuvné moduly" #~ msgctxt "@label" #~ msgid "Generic Materials" #~ msgstr "Obecné materiály" #~ msgctxt "@info" #~ msgid "Fetching packages..." #~ msgstr "Načítám balíčky..." #~ msgctxt "@label" #~ msgid "Website" #~ msgstr "Webová stránka" #~ msgctxt "@label" #~ msgid "Email" #~ msgstr "Email" #~ msgctxt "@description" #~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise" #~ msgstr "Přihlaste se, abyste získali ověřené pluginy a materiály pro Ultimaker Cura Enterprise" #~ msgctxt "@label" #~ msgid "Version" #~ msgstr "Verze" #~ msgctxt "@label" #~ msgid "Last updated" #~ msgstr "Naposledy aktualizování" #~ msgctxt "@label" #~ msgid "Downloads" #~ msgstr "Ke stažení" #~ msgctxt "@title:tab" #~ msgid "Installed plugins" #~ msgstr "Nainstalovaná rozšíření" #~ msgctxt "@info" #~ msgid "No plugin has been installed." #~ msgstr "Žádné rozšíření nebylo nainstalováno." #~ msgctxt "@title:tab" #~ msgid "Installed materials" #~ msgstr "Nainstalované materiály" #~ msgctxt "@info" #~ msgid "No material has been installed." #~ msgstr "Žádný materiál nebyl nainstalován." #~ msgctxt "@title:tab" #~ msgid "Bundled plugins" #~ msgstr "Zabalená rozšíření" #~ msgctxt "@title:tab" #~ msgid "Bundled materials" #~ msgstr "Zabalené materiály" #~ msgctxt "@info" #~ msgid "Could not connect to the Cura Package database. Please check your connection." #~ msgstr "Nelze se připojit k databázi balíčku Cura. Zkontrolujte připojení." #~ msgctxt "@title:window" #~ msgid "Confirm uninstall" #~ msgstr "Potvrdit odinstalaci" #~ msgctxt "@text:window" #~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults." #~ msgstr "Odinstalujete materiály a / nebo profily, které se stále používají. Potvrzením resetujete následující materiály / profily na výchozí hodnoty." #~ msgctxt "@text:window" #~ msgid "Materials" #~ msgstr "Materiály" #~ msgctxt "@text:window" #~ msgid "Profiles" #~ msgstr "Profily" #~ msgctxt "@action:button" #~ msgid "Confirm" #~ msgstr "Potvrdit" #~ msgctxt "@info:tooltip" #~ msgid "Some things could be problematic in this print. Click to see tips for adjustment." #~ msgstr "Některé věci mohou být v tomto tisku problematické. Kliknutím zobrazíte tipy pro úpravy." #~ msgctxt "@label" #~ msgid "Support library for handling planar objects" #~ msgstr "Podpůrná knihovna pro manipulaci s planárními objekty" #~ msgctxt "@text:window, %1 is a profile name" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to Keep these changed settings after switching profiles?\n" #~ "Alternatively, you can discard the changes to load the defaults from '%1'." #~ msgstr "" #~ "Upravili jste některá nastavení profilu.\n" #~ "Chcete tato změněná nastavení zachovat i po přepnutí profilů?\n" #~ "V opačném případě můžete změny smazat a načíst výchozí hodnoty z '%1'." #~ msgctxt "@action:inmenu menubar:view" #~ msgid "&Build plate" #~ msgstr "Pod&ložka" #~ msgctxt "@label" #~ msgid "Create" #~ msgstr "Vytvořit" #~ msgctxt "@label" #~ msgid "Duplicate" #~ msgstr "Duplikovat" #~ msgctxt "@label %1 is printer name" #~ msgid "Printer: %1" #~ msgstr "Tiskárna: %1" #~ msgctxt "@action:button" #~ msgid "Update profile with current settings/overrides" #~ msgstr "Aktualizovat profil s aktuálním nastavení/přepsánímy" #~ msgctxt "@label" #~ msgid "Theme:" #~ msgstr "Styl:" #~ msgctxt "@label" #~ msgid "You will need to restart the application for these changes to have effect." #~ msgstr "Aby se tyto změny projevily, budete muset aplikaci restartovat." #~ msgctxt "@action:button" #~ msgid "More information" #~ msgstr "Více informací" #~ msgctxt "@action:button" #~ msgid "Create" #~ msgstr "Vytvořit" #~ msgctxt "@action:button Sending materials to printers" #~ msgid "Sync with Printers" #~ msgstr "Synchronizovat s tiskárnami" #~ msgctxt "@action:label" #~ msgid "Printer" #~ msgstr "Tiskárna" #~ msgctxt "@title:column" #~ msgid "Unit" #~ msgstr "Jednotka" #~ msgctxt "@action:inmenu" #~ msgid "Show Online Troubleshooting Guide" #~ msgstr "Zobrazit online průvodce řešením problémů" #~ msgctxt "@action:inmenu" #~ msgid "Add more materials from Marketplace" #~ msgstr "Přidat více materiálů z obchodu" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Arrange All Models To All Build Plates" #~ msgstr "Uspořádejte všechny modely do všechpodložek" #~ msgctxt "@action:menu" #~ msgid "&Marketplace" #~ msgstr "Mark&et" #~ msgctxt "description" #~ msgid "Find, manage and install new Cura packages." #~ msgstr "Najděte, spravujte a nainstalujte nové balíčky Cura." #~ msgctxt "name" #~ msgid "Toolbox" #~ msgstr "Nástroje" #~ msgctxt "description" #~ msgid "Provides the Simulation view." #~ msgstr "Poskytuje zobrazení simulace." #~ msgctxt "@info:status" #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account." #~ msgstr "Odesílejte a sledujte tiskové úlohy odkudkoli pomocí účtu Ultimaker." #~ msgctxt "@info:status Ultimaker Cloud should not be translated." #~ msgid "Connect to Ultimaker Digital Factory" #~ msgstr "Připojit se k Ultimaker Digital Factory" #~ msgctxt "@info" #~ msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura." #~ msgstr "Vstup z webových kamer pro cloudové tiskárny nemůže být v Ultimaker Cura zobrazen." #~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" #~ msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}." #~ msgstr "Pro vaše {machine_name} mohou být k dispozici nové funkce nebo opravy chyb! Pokud ještě není v nejnovější verzi, doporučuje se aktualizovat firmware v tiskárně na verzi {latest_version}." #~ msgctxt "@info:title The %s gets replaced with the printer name." #~ msgid "New %s firmware available" #~ msgstr "Nový %s firmware je dostupný" #~ msgctxt "@info:status" #~ msgid "Global stack is missing." #~ msgstr "Chybí globální zásobník." #~ msgctxt "@info:status" #~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces." #~ msgstr "Váš model není rozmanitý. Zvýrazněné oblasti indikují buď chybějící, či vedlejší povrch." #~ msgctxt "@info:title" #~ msgid "Model errors" #~ msgstr "Chyby modelu" #~ msgctxt "@label:listbox" #~ msgid "Layer thickness" #~ msgstr "Tloušťka vrstvy" #~ msgctxt "@label" #~ msgid "Your key to connected 3D printing" #~ msgstr "Váš klíč k propojenému 3D tisku" #~ msgctxt "@text" #~ msgid "" #~ "- Customize your experience with more print profiles and plugins\n" #~ "- Stay flexible by syncing your setup and loading it anywhere\n" #~ "- Increase efficiency with a remote workflow on Ultimaker printers" #~ msgstr "" #~ "- Přizpůsobte si své zážitky pomocí více profilů tisku a modulů\n" #~ "- Zůstaňte flexibilní díky synchronizaci nastavení a přístupu k ní kdekoli\n" #~ "- Zvyšte efektivitu pomocí vzdáleného pracovního postupu na tiskárnách Ultimaker" #~ msgctxt "@button" #~ msgid "Create account" #~ msgstr "Vytvořit účet" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Delete Selected Model" #~ msgid_plural "Delete Selected Models" #~ msgstr[0] "Smazat vybraný model" #~ msgstr[1] "Smazat vybrané modely" #~ msgstr[2] "Smazat vybrané modely" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Center Selected Model" #~ msgid_plural "Center Selected Models" #~ msgstr[0] "Centrovat vybraný model" #~ msgstr[1] "Centrovat vybrané modely" #~ msgstr[2] "Centrovat vybrané modely" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Multiply Selected Model" #~ msgid_plural "Multiply Selected Models" #~ msgstr[0] "Násobit vybraný model" #~ msgstr[1] "Násobit vybrané modely" #~ msgstr[2] "Násobit vybrané modely" #~ msgctxt "@button" #~ msgid "Finish" #~ msgstr "Dokončit" #~ msgctxt "@label" #~ msgid "Ultimaker Account" #~ msgstr "Účet Ultimaker" #~ msgctxt "@text" #~ msgid "Your key to connected 3D printing" #~ msgstr "Váš klíč k propojenému 3D tisku" #~ msgctxt "@text" #~ msgid "- Customize your experience with more print profiles and plugins" #~ msgstr "- Přizpůsobte si své zážitky pomocí více profilů tisku a modulů" #~ msgctxt "@text" #~ msgid "- Stay flexible by syncing your setup and loading it anywhere" #~ msgstr "- Zůstaňte flexibilní díky synchronizaci nastavení a přístupu k ní kdekoli" #~ msgctxt "@text" #~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers" #~ msgstr "- Zvyšte efektivitu pomocí vzdáleného pracovního postupu na tiskárnách Ultimaker" #~ msgctxt "@text" #~ msgid "" #~ "Please follow these steps to set up\n" #~ "Ultimaker Cura. This will only take a few moments." #~ msgstr "" #~ "Při nastavování postupujte podle těchto pokynů\n" #~ "Ultimaker Cura. Bude to trvat jen několik okamžiků." #~ msgctxt "@label" #~ msgid "What's new in Ultimaker Cura" #~ msgstr "Co je nového v Ultimaker Cura" #~ msgctxt "@label ({} is object name)" #~ msgid "Are you sure you wish to remove {}? This cannot be undone!" #~ msgstr "Doopravdy chcete odstranit {}? Toto nelze vrátit zpět!" #~ msgctxt "@info:status" #~ msgid "The selected model was too small to load." #~ msgstr "Vybraný model byl moc malý k načtení." #~ msgctxt "@info:status" #~ msgid "Successfully imported profile {0}" #~ msgstr "Úspěšně importován profil {0}" #~ msgctxt "@info:status" #~ msgid "Could not find a quality type {0} for the current configuration." #~ msgstr "Nelze najít typ kvality {0} pro aktuální konfiguraci." #~ msgctxt "info:status" #~ msgid "Adding printer {} ({}) from your account" #~ msgstr "Přidávám tiskárnu {} ({}) z vašeho účtu" #~ msgctxt "info:hidden list items" #~ msgid "
  • ... and {} others
    • " #~ msgstr "
  • ... a {} dalších
    • " #~ msgctxt "info:status" #~ msgid "Printers added from Digital Factory:
      {}
    " #~ msgstr "Tiskárny přidané z Digital Factory:
      {}
    " #~ msgctxt "info:status" #~ msgid "
      {}
    To establish a connection, please visit the Ultimaker Digital Factory." #~ msgstr "
      {}
    Chcete-li navázat spojení, navštivte Ultimaker Digital Factory." #~ msgctxt "@label ({} is printer name)" #~ msgid "{} will be removed until the next account sync.
    To remove {} permanently, visit Ultimaker Digital Factory.

    Are you sure you want to remove {} temporarily?" #~ msgstr "{} bude odebrána až do další synchronizace účtu.
    Chcete-li {} trvale odebrat, navštivte Ultimaker Digital Factory.

    Opravdu chcete dočasně odebrat {}?" #~ msgctxt "@label" #~ msgid "" #~ "You are about to remove {} printer(s) from Cura. This action cannot be undone. \n" #~ "Are you sure you want to continue?" #~ msgstr "" #~ "Chystáte se odebrat {} tiskárny z Cury. Tuto akci nelze vrátit zpět.\n" #~ "Jste si jistý, že chcete pokračovat?" #~ msgctxt "@label" #~ msgid "" #~ "You are about to remove all printers from Cura. This action cannot be undone. \n" #~ "Are you sure you want to continue?" #~ msgstr "" #~ "Chystáte se odebrat všechny tiskárny z Cury. Tuto akci nelze vrátit zpět.\n" #~ "Doopravdy chcete pokračovat?" #~ msgctxt "@action:ComboBox option" #~ msgid "Update" #~ msgstr "Aktualizovat" #~ msgctxt "@action:ComboBox option" #~ msgid "Create new" #~ msgstr "Vytvořit nový" #~ msgctxt "@label" #~ msgid "Shared Heater" #~ msgstr "Sdílený ohřívač" #~ msgctxt "@info" #~ msgid "The webcam is not available because you are monitoring a cloud printer." #~ msgstr "Webová kamera není k dispozici, protože monitorujete cloudovou tiskárnu." #~ msgctxt "@button" #~ msgid "Ultimaker Digital Factory" #~ msgstr "Ultimaker Digital Factory" #~ msgctxt "@text:window, %1 is a profile name" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to Keep these changed settings after switching profiles?\n" #~ "Alternatively, you can Discard the changes to load the defaults from '%1'." #~ msgstr "" #~ "Upravili jste některá nastavení profilu.\n" #~ "Chcete tato změněná nastavení zachovat i po přepnutí profilů?\n" #~ "Alternativně můžete zahodit změny a načíst výchozí hodnoty z '%1'." #~ msgctxt "@label" #~ msgid "Overrides %1 setting." #~ msgid_plural "Overrides %1 settings." #~ msgstr[0] "Přepsat %1 nastavení." #~ msgstr[1] "Přepsat %1 nastavení." #~ msgstr[2] "Přepsat %1 nastavení." #~ msgctxt "@text" #~ msgid "Please give your printer a name" #~ msgstr "Prosím dejte vaší tiskárně název" #~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" #~ msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer." #~ msgstr "Pro vaše zařízení {machine_name} jsou k dispozici nové funkce! Doporučujeme aktualizovat firmware na tiskárně." #~ msgctxt "@action:button" #~ msgid "Print via Cloud" #~ msgstr "Tisknout přes Cloud" #~ msgctxt "@properties:tooltip" #~ msgid "Print via Cloud" #~ msgstr "Tisknout přes Cloud" #~ msgctxt "@info:status" #~ msgid "Connected via Cloud" #~ msgstr "Připojeno přes Cloud" #~ msgctxt "@info:status Ultimaker Cloud should not be translated." #~ msgid "Connect to Ultimaker Cloud" #~ msgstr "Připojit k Ultimaker Cloudu" #~ msgctxt "@label" #~ msgid "You need to login first before you can rate" #~ msgstr "Před hodnocením se musíte přihlásit" #~ msgctxt "@label" #~ msgid "You need to install the package before you can rate" #~ msgstr "Před hodnocením musíte nainstalovat balíček" #~ msgctxt "@label" #~ msgid "ratings" #~ msgstr "hodnocení" #~ msgctxt "@label" #~ msgid "Featured" #~ msgstr "Doporučeno" #~ msgctxt "@label" #~ msgid "Your rating" #~ msgstr "Vaše hodnocení" #~ msgctxt "@label" #~ msgid "Author" #~ msgstr "Autor" #~ msgctxt "@description" #~ msgid "Get plugins and materials verified by Ultimaker" #~ msgstr "Získejte pluginy a materiály ověřené společností Ultimaker" #~ msgctxt "@label The argument is a username." #~ msgid "Hi %1" #~ msgstr "Zdravím, %1" #~ msgctxt "@button" #~ msgid "Ultimaker account" #~ msgstr "Ultimaker účet" #~ msgctxt "@button" #~ msgid "Sign out" #~ msgstr "Odhlásit se" #~ msgctxt "@label" #~ msgid "Support library for analysis of complex networks" #~ msgstr "Podpůrná knihovna pro analýzu komplexních sítí" #~ msgctxt "@Label" #~ msgid "Python HTTP library" #~ msgstr "Python HTTP knihovna" #~ msgctxt "@text:window" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to keep or discard those settings?" #~ msgstr "" #~ "Upravili jste některá nastavení profilu.\n" #~ "Chcete tato nastavení zachovat nebo zrušit?" #~ msgctxt "@title:column" #~ msgid "Default" #~ msgstr "Výchozí" #~ msgctxt "@title:column" #~ msgid "Customized" #~ msgstr "Upraveno" #~ msgctxt "@action:button" #~ msgid "Discard" #~ msgstr "Smazat" #~ msgctxt "@action:button" #~ msgid "Keep" #~ msgstr "Ponechat" #~ msgctxt "@action:button" #~ msgid "Create New Profile" #~ msgstr "Vytvořit nový profil" #~ msgctxt "@title:menu menubar:file" #~ msgid "&Save..." #~ msgstr "Uloži&t..." #~ msgctxt "@text" #~ msgid "Place enter your printer's IP address." #~ msgstr "Prosím zadejte IP adresu vaší tiskárny." #~ msgctxt "@button" #~ msgid "Create an account" #~ msgstr "Vytvořit účet" #~ msgctxt "@info:status" #~ msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder." #~ msgstr "Nic ke slicování, protože žádný z modelů neodpovídá objemu sestavení nebo není přiřazen k vytlačovacímu stroji s deaktivací. Změňte měřítko nebo otočte modely, aby se vešly, nebo povolte extrudér." #~ msgctxt "@info:backup_status" #~ msgid "There was an error listing your backups." #~ msgstr "Nastala chyba při výpisu vašich záloh." #~ msgctxt "@title:groupbox" #~ msgid "User description (Note: Developers may not speak your language, please use English if possible)" #~ msgstr "Popis (Poznámka: Vývojáři nemusí mluvit vaším jazykem, pokud je to možné, použijte prosím angličtinu)" #~ msgctxt "@title:window" #~ msgid "Closing Cura" #~ msgstr "Zavírám Curu" #~ msgctxt "@label" #~ msgid "Are you sure you want to exit Cura?" #~ msgstr "Doopravdy chcete ukončit Curu?" #~ msgctxt "@label" #~ msgid "Language:" #~ msgstr "Jazyk:" #~ msgctxt "@label" #~ msgid "Ultimaker Cloud" #~ msgstr "Ultimaker Cloud" #~ msgctxt "@text" #~ msgid "The next generation 3D printing workflow" #~ msgstr "Pracovní postup 3D tisku nové generace" #~ msgctxt "@text" #~ msgid "- Send print jobs to Ultimaker printers outside your local network" #~ msgstr "- Odeslat tiskové úlohy do tiskáren Ultimaker mimo vaši místní síť" #~ msgctxt "@text" #~ msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere" #~ msgstr "- Uložte svá nastavení Ultimaker Cura do cloudu pro použití kdekoli" #~ msgctxt "@text" #~ msgid "- Get exclusive access to print profiles from leading brands" #~ msgstr "- Získejte exkluzivní přístup k profilům tisku od předních značek" #~ msgctxt "@label" #~ msgid "The value is resolved from per-extruder values " #~ msgstr "Hodnota je rozlišena z hodnot na extruderu " #~ msgctxt "@label" #~ msgid "The next generation 3D printing workflow" #~ msgstr "Pracovní postup 3D tisku nové generace" #~ msgctxt "@text" #~ msgid "" #~ "- Send print jobs to Ultimaker printers outside your local network\n" #~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n" #~ "- Get exclusive access to print profiles from leading brands" #~ msgstr "" #~ "- Odeslat tiskové úlohy do tiskáren Ultimaker mimo vaši místní síť\n" #~ "- Uložte svá nastavení Ultimaker Cura do cloudu pro použití kdekoli\n" #~ "- Získejte exkluzivní přístup k profilům tisku od předních značek" #~ msgctxt "@title:window" #~ msgid "About " #~ msgstr "O " #~ msgctxt "@info:button" #~ msgid "Quit Cura" #~ msgstr "Ukončit Curu" #~ msgctxt "@action:checkbox" #~ msgid "Infill only" #~ msgstr "Pouze výplň" #~ msgctxt "@info:tooltip" #~ msgid "Change active post-processing scripts" #~ msgstr "Změnit akitvní post-processing skripty" #~ msgctxt "@label:listbox" #~ msgid "Feedrate" #~ msgstr "Feedrate" #~ msgctxt "name" #~ msgid "Machine Settings action" #~ msgstr "Akce nastavení zařízení"