# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
"POT-Creation-Date: 2020-04-06 16:33+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:85
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:104
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:340
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1490
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:188
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:229
msgctxt "@label"
msgid "Unknown"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
msgctxt "@label"
msgid ""
"The printer(s) below cannot be connected because they are part of a group"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:117
msgctxt "@label"
msgid "Available networked printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:208
msgctxt "@menuitem"
msgid "Not overridden"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:41
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:321
msgctxt "@label"
msgid "Default"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:44
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
msgctxt "@label"
msgid "Visual"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
msgctxt "@text"
msgid ""
"The visual profile is designed to print visual prototypes and models with "
"the intent of high visual and surface quality."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:48
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
msgctxt "@label"
msgid "Engineering"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
msgctxt "@text"
msgid ""
"The engineering profile is designed to print functional prototypes and end-"
"use parts with the intent of better accuracy and for closer tolerances."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:52
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
msgctxt "@label"
msgid "Draft"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
msgctxt "@text"
msgid ""
"The draft profile is designed to print initial prototypes and concept "
"validation with the intent of significant print time reduction."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:213
msgctxt "@label"
msgid "Custom Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:214
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
msgctxt "@label"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:359
msgctxt "@label"
msgid "Custom profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:393
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "All Supported Types ({0})"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:394
msgctxt "@item:inlistbox"
msgid "All Files (*)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:81
msgctxt "@info:title"
msgid "Login failed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:66
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:30
msgctxt "@info:status"
msgid "Finding new location for objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:70
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:34
msgctxt "@info:title"
msgid "Finding Location"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:149
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:103
#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
msgctxt "@info:status"
msgid "Unable to find a location within the build volume for all objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:104
msgctxt "@info:title"
msgid "Can't Find Location"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:99
msgctxt "@info:backup_failed"
msgid "Could not create archive from user data directory: {}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
msgctxt "@info:title"
msgid "Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:114
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup without having proper data or meta data."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:125
msgctxt "@info:backup_failed"
msgid "Tried to restore a Cura backup that is higher than the current version."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:95
msgctxt "@info:status"
msgid ""
"The build volume height has been reduced due to the value of the \"Print "
"Sequence\" setting to prevent the gantry from colliding with printed models."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:97
msgctxt "@info:title"
msgid "Build Volume"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
msgctxt "@title:window"
msgid "Cura can't start"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
msgctxt "@label crash message"
msgid ""
"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right."
"</p></b>\n"
"                    <p>We encountered an unrecoverable error during start "
"up. It was possibly caused by some incorrect configuration files. We suggest "
"to backup and reset your configuration.</p>\n"
"                    <p>Backups can be found in the configuration folder.</"
"p>\n"
"                    <p>Please send us this Crash Report to fix the problem.</"
"p>\n"
"                "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
msgctxt "@action:button"
msgid "Send crash report to Ultimaker"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
msgctxt "@action:button"
msgid "Show detailed crash report"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
msgctxt "@action:button"
msgid "Show configuration folder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
msgctxt "@action:button"
msgid "Backup and Reset Configuration"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:169
msgctxt "@title:window"
msgid "Crash Report"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:188
msgctxt "@label crash message"
msgid ""
"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report "
"to fix the problem</p></b>\n"
"            <p>Please use the \"Send report\" button to post a bug report "
"automatically to our servers</p>\n"
"        "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:196
msgctxt "@title:groupbox"
msgid "System information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:205
msgctxt "@label unknown version of Cura"
msgid "Unknown"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:216
msgctxt "@label Cura version number"
msgid "Cura version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:217
msgctxt "@label"
msgid "Cura language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:218
msgctxt "@label"
msgid "OS language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:219
msgctxt "@label Type of platform"
msgid "Platform"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:220
msgctxt "@label"
msgid "Qt version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:221
msgctxt "@label"
msgid "PyQt version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:222
msgctxt "@label OpenGL version"
msgid "OpenGL"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:247
msgctxt "@label"
msgid "Not yet initialized<br/>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:250
#, python-brace-format
msgctxt "@label OpenGL version"
msgid "<li>OpenGL Version: {version}</li>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:251
#, python-brace-format
msgctxt "@label OpenGL vendor"
msgid "<li>OpenGL Vendor: {vendor}</li>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:252
#, python-brace-format
msgctxt "@label OpenGL renderer"
msgid "<li>OpenGL Renderer: {renderer}</li>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:286
msgctxt "@title:groupbox"
msgid "Error traceback"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:372
msgctxt "@title:groupbox"
msgid "Logs"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:400
msgctxt "@action:button"
msgid "Send report"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:495
msgctxt "@info:progress"
msgid "Loading machines..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:502
msgctxt "@info:progress"
msgid "Setting up preferences..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:630
msgctxt "@info:progress"
msgid "Initializing Active Machine..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:757
msgctxt "@info:progress"
msgid "Initializing machine manager..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:771
msgctxt "@info:progress"
msgid "Initializing build volume..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:833
msgctxt "@info:progress"
msgid "Setting up scene..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:868
msgctxt "@info:progress"
msgid "Loading interface..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:873
msgctxt "@info:progress"
msgid "Initializing engine..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1166
#, python-format
msgctxt ""
"@info 'width', 'depth' and 'height' are variable names that must NOT be "
"translated; just translate the format of ##x##x## mm."
msgid "%(width).1f x %(depth).1f x %(height).1f mm"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1676
#, python-brace-format
msgctxt "@info:status"
msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1677
#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
msgctxt "@info:title"
msgid "Warning"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1686
#, python-brace-format
msgctxt "@info:status"
msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1687
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:138
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:145
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:137
msgctxt "@info:title"
msgid "Error"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1776
msgctxt "@info:status"
msgid "The selected model was too small to load."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:29
msgctxt "@info:status"
msgid "Multiplying and placing objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
msgctxt "@info:title"
msgid "Placing Objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:108
msgctxt "@info:title"
msgid "Placing Object"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:79
msgctxt "@message"
msgid "Could not read response."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:68
msgctxt "@message"
msgid "The provided state is not correct."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:79
msgctxt "@message"
msgid "Please give the required permissions when authorizing this application."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:86
msgctxt "@message"
msgid "Something unexpected happened when trying to log in, please try again."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:201
msgctxt "@info"
msgid "Unable to reach the Ultimaker account server."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:196
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:124
msgctxt "@title:window"
msgid "File Already Exists"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:197
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:125
#, python-brace-format
msgctxt "@label Don't translate the XML tag <filename>!"
msgid ""
"The file <filename>{0}</filename> already exists. Are you sure you want to "
"overwrite it?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:432
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:435
msgctxt "@info:status"
msgid "Invalid file URL:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:136
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid ""
"Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:143
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid ""
"Failed to export profile to <filename>{0}</filename>: Writer plugin reported "
"failure."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:148
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Exported profile to <filename>{0}</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:149
msgctxt "@info:title"
msgid "Export succeeded"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:176
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>: {1}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:180
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid ""
"Can't import profile from <filename>{0}</filename> before a printer is added."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:197
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "No custom profile to import in file <filename>{0}</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:201
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:225
#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename>!"
msgid ""
"This profile <filename>{0}</filename> contains incorrect data, could not "
"import it."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:324
#, python-brace-format
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Failed to import profile from <filename>{0}</filename>:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:327
#, python-brace-format
msgctxt "@info:status"
msgid "Successfully imported profile {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:330
#, python-brace-format
msgctxt "@info:status"
msgid "File {0} does not contain any valid profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:333
#, python-brace-format
msgctxt "@info:status"
msgid "Profile {0} has an unknown file type or is corrupted."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:368
msgctxt "@label"
msgid "Custom profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:384
msgctxt "@info:status"
msgid "Profile is missing a quality type."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:398
#, python-brace-format
msgctxt "@info:status"
msgid "Could not find a quality type {0} for the current configuration."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
msgctxt "@info:not supported profile"
msgid "Not supported"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
msgctxt "@info:No intent profile selected"
msgid "Default"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:659
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:199
msgctxt "@label"
msgid "Nozzle"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:796
msgctxt "@info:message Followed by a list of settings."
msgid ""
"Settings have been changed to match the current availability of extruders:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:798
msgctxt "@info:title"
msgid "Settings updated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1367
msgctxt "@info:title"
msgid "Extruder(s) Disabled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
msgctxt "@action:button"
msgid "Add"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:18
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:406
#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234
#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
msgctxt "@action:button"
msgid "Cancel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:62
#, python-brace-format
msgctxt "@label"
msgid "Group #{group_nr}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:81
msgctxt "@tooltip"
msgid "Outer Wall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:82
msgctxt "@tooltip"
msgid "Inner Walls"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
msgctxt "@tooltip"
msgid "Skin"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
msgctxt "@tooltip"
msgid "Infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
msgctxt "@tooltip"
msgid "Support Infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
msgctxt "@tooltip"
msgid "Support Interface"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
msgctxt "@tooltip"
msgid "Support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
msgctxt "@tooltip"
msgid "Skirt"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
msgctxt "@tooltip"
msgid "Prime Tower"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
msgctxt "@tooltip"
msgid "Travel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
msgctxt "@tooltip"
msgid "Retractions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
msgctxt "@tooltip"
msgid "Other"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
msgctxt "@action:button"
msgid "Next"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17
#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:131
#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
msgctxt "@action:button"
msgid "Close"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
msgctxt "@info:title"
msgid "3D Model Assistant"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:94
#, python-brace-format
msgctxt "@info:status"
msgid ""
"<p>One or more 3D models may not print optimally due to the model size and "
"material configuration:</p>\n"
"<p>{model_names}</p>\n"
"<p>Find out how to ensure the best possible print quality and reliability.</"
"p>\n"
"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality "
"guide</a></p>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:497
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid ""
"Project file <filename>{0}</filename> contains an unknown machine type "
"<message>{1}</message>. Cannot import the machine. Models will be imported "
"instead."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:500
msgctxt "@info:title"
msgid "Open Project File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:186
msgctxt "@title:tab"
msgid "Recommended"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:188
msgctxt "@title:tab"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
msgctxt "@item:inlistbox"
msgid "3MF File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
msgctxt "@error:zip"
msgid "3MF Writer plug-in is corrupt."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
msgctxt "@error:zip"
msgid "No permission to write the workspace here."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:181
msgctxt "@error:zip"
msgid "Error writing 3mf file."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
msgctxt "@item:inlistbox"
msgid "3MF file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
msgctxt "@item:inlistbox"
msgid "Cura Project 3MF file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
msgctxt "@item:inlistbox"
msgid "AMF File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
msgctxt "@info:title"
msgid "Backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
msgctxt "@info:backup_status"
msgid "There was an error while uploading your backup."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
msgctxt "@info:backup_status"
msgid "Creating your backup..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
msgctxt "@info:backup_status"
msgid "There was an error while creating your backup."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
msgctxt "@info:backup_status"
msgid "Uploading your backup..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
msgctxt "@info:backup_status"
msgid "Your backup has finished uploading."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
msgctxt "@error:file_size"
msgid "The backup exceeds the maximum file size."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
msgctxt "@info:backup_status"
msgid "There was an error trying to restore your backup."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
msgctxt "@item:inmenu"
msgid "Manage backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
msgctxt "@info:status"
msgid ""
"Unable to slice with the current material as it is incompatible with the "
"selected machine or configuration."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:343
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:374
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:398
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:407
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:416
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
msgctxt "@info:title"
msgid "Unable to slice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:373
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Unable to slice with the current settings. The following settings have "
"errors: {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:397
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Unable to slice due to some per-model settings. The following settings have "
"errors on one or more models: {error_labels}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:406
msgctxt "@info:status"
msgid ""
"Unable to slice because the prime tower or prime position(s) are invalid."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:415
#, python-format
msgctxt "@info:status"
msgid ""
"Unable to slice because there are objects associated with disabled Extruder "
"%s."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:424
msgctxt "@info:status"
msgid ""
"Please review settings and check if your models:\n"
"- Fit within the build volume\n"
"- Are assigned to an enabled extruder\n"
"- Are not all set as modifier meshes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:50
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
msgctxt "@info:status"
msgid "Processing Layers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:256
msgctxt "@info:title"
msgid "Information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:126
msgctxt "@info"
msgid "Could not access update information."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
#, python-brace-format
msgctxt ""
"@info Don't translate {machine_name}, since it gets replaced by a printer "
"name!"
msgid ""
"New features are available for your {machine_name}! It is recommended to "
"update the firmware on your printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:21
#, python-format
msgctxt "@info:title The %s gets replaced with the printer name."
msgid "New %s firmware available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:27
msgctxt "@action:button"
msgid "How to update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:25
msgctxt "@action"
msgid "Update Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
msgctxt "@item:inlistbox"
msgid "Compressed G-code File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:38
msgctxt "@error:not supported"
msgid "GCodeGzWriter does not support text mode."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
msgctxt "@item:inlistbox"
msgid "G-code File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:341
msgctxt "@info:status"
msgid "Parsing G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:343
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:497
msgctxt "@info:title"
msgid "G-code Details"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:495
msgctxt "@info:generic"
msgid ""
"Make sure the g-code is suitable for your printer and printer configuration "
"before sending the file to it. The g-code representation may not be accurate."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "G File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:66
msgctxt "@error:not supported"
msgid "GCodeWriter does not support non-text mode."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:72
#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:88
msgctxt "@warning:status"
msgid "Please prepare G-code before exporting."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "JPG Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
msgctxt "@item:inlistbox"
msgid "JPEG Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
msgctxt "@item:inlistbox"
msgid "PNG Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
msgctxt "@item:inlistbox"
msgid "BMP Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
msgctxt "@item:inlistbox"
msgid "GIF Image"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
msgctxt "@item:inlistbox"
msgid "Cura 15.04 profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:30
msgctxt "@action"
msgid "Machine Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
msgctxt "@item:inmenu"
msgid "Monitor"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
msgctxt "@label"
msgid "Per Model Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
msgctxt "@info:tooltip"
msgid "Configure Per Model Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
msgctxt "@item:inmenu"
msgid "Post Processing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:37
msgctxt "@item:inmenu"
msgid "Modify G-Code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
msgctxt "@item:inmenu"
msgid "Prepare"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
msgctxt "@item:inmenu"
msgid "Preview"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Save to Removable Drive"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
#, python-brace-format
msgctxt "@item:inlistbox"
msgid "Save to Removable Drive {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:64
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:107
msgctxt "@info:status"
msgid "There are no file formats available to write with!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
#, python-brace-format
msgctxt "@info:progress Don't translate the XML tags <filename>!"
msgid "Saving to Removable Drive <filename>{0}</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:94
msgctxt "@info:title"
msgid "Saving"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:104
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:107
#, python-brace-format
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
#, python-brace-format
msgctxt "@info:status Don't translate the tag {device}!"
msgid "Could not find a file name when trying to write to {device}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:136
#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
#, python-brace-format
msgctxt "@info:status"
msgid "Could not save to removable drive {0}: {1}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
#, python-brace-format
msgctxt "@info:status"
msgid "Saved to Removable Drive {0} as {1}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:145
msgctxt "@info:title"
msgid "File Saved"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
msgctxt "@action:button"
msgid "Eject"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146
#, python-brace-format
msgctxt "@action"
msgid "Eject removable device {0}"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
#, python-brace-format
msgctxt "@info:status"
msgid "Ejected {0}. You can now safely remove the drive."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
msgctxt "@info:title"
msgid "Safely Remove Hardware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
#, python-brace-format
msgctxt "@info:status"
msgid "Failed to eject {0}. Another program may be using the drive."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:75
msgctxt "@item:intext"
msgid "Removable Drive"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:119
msgctxt "@info:status"
msgid "Cura does not accurately display layers when Wire Printing is enabled."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:120
msgctxt "@info:title"
msgid "Simulation View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
msgctxt "@info:status"
msgid "Nothing is shown because you need to slice first."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
msgctxt "@info:title"
msgid "No layers to show"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
msgctxt "@info:option_text"
msgid "Do not show this message again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
msgctxt "@item:inlistbox"
msgid "Layer view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
msgctxt "@item:inmenu"
msgid "Solid view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
msgctxt "@label"
msgid "Support Blocker"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
msgctxt "@info:tooltip"
msgid "Create a volume in which supports are not printed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:101
msgctxt "@info:generic"
msgid "Do you want to sync material and software packages with your account?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:102
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:91
msgctxt "@info:title"
msgid "Changes detected from your Ultimaker account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:105
msgctxt "@action:button"
msgid "Sync"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:87
msgctxt "@info:generic"
msgid "Syncing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
msgctxt "@button"
msgid "Decline"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
msgctxt "@button"
msgid "Agree"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
msgctxt "@title:window"
msgid "Plugin License Agreement"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
msgctxt "@button"
msgid "Decline and remove from account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:18
msgctxt "@info:generic"
msgid "You need to quit and restart {} before changes have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:71
msgctxt "@info:generic"
msgid "{} plugins failed to download"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
msgid "Open Compressed Triangle Mesh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
msgctxt "@item:inlistbox"
msgid "COLLADA Digital Asset Exchange"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
msgctxt "@item:inlistbox"
msgid "glTF Binary"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
msgctxt "@item:inlistbox"
msgid "glTF Embedded JSON"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
msgctxt "@item:inlistbox"
msgid "Stanford Triangle Format"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
msgctxt "@item:inlistbox"
msgid "Compressed COLLADA Digital Asset Exchange"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
msgctxt "@item:inlistbox"
msgid "Ultimaker Format Package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:21
msgctxt "@action"
msgid "Level build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:18
msgctxt "@action"
msgid "Select upgrades"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:139
msgctxt "@action:button"
msgid "Print via Cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:140
msgctxt "@properties:tooltip"
msgid "Print via Cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:141
msgctxt "@info:status"
msgid "Connected via Cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
msgctxt "@info:status"
msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
msgctxt "@info:status Ultimaker Cloud should not be translated."
msgid "Connect to Ultimaker Cloud"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
msgctxt "@action"
msgid "Get started"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
msgctxt "@info:status"
msgid ""
"You are attempting to connect to a printer that is not running Ultimaker "
"Connect. Please update the printer to the latest firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
msgctxt "@info:title"
msgid "Update your printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
#, python-brace-format
msgctxt "@info:status"
msgid ""
"Cura has detected material profiles that were not yet installed on the host "
"printer of group {0}."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
msgctxt "@info:title"
msgid "Sending materials to printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
#, python-brace-format
msgctxt "@info:status"
msgid ""
"You are attempting to connect to {0} but it is not the host of a group. You "
"can visit the web page to configure it as a group host."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
msgctxt "@info:title"
msgid "Not a group host"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
msgctxt "@action"
msgid "Configure group"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
msgctxt "@info:status"
msgid "Please wait until the current job has been sent."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
msgctxt "@info:title"
msgid "Print error"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
msgctxt "@info:text"
msgid "Could not upload the data to the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
msgctxt "@info:title"
msgid "Network error"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:14
msgctxt "@info:status"
msgid "Sending Print Job"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
msgctxt "@info:status"
msgid "Uploading print job to printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
msgctxt "@info:status"
msgid "Print job was successfully sent to the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
msgctxt "@info:title"
msgid "Data Sent"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:57
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print over network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
msgctxt "@properties:tooltip"
msgid "Print over network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
msgctxt "@info:status"
msgid "Connected over the network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:26
msgctxt "@action"
msgid "Connect via Network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
msgctxt "@info:status"
msgid "tomorrow"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
msgctxt "@info:status"
msgid "today"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
msgctxt "@item:inmenu"
msgid "USB printing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
msgctxt "@action:button Preceded by 'Ready to'."
msgid "Print via USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
msgctxt "@info:tooltip"
msgid "Print via USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
msgctxt "@info:status"
msgid "Connected via USB"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:106
msgctxt "@label"
msgid ""
"A USB print is in progress, closing Cura will stop this print. Are you sure?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
msgctxt "@message"
msgid ""
"A print is still in progress. Cura cannot start another print via USB until "
"the previous print has completed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:128
msgctxt "@message"
msgid "Print in Progress"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
msgctxt "@item:inlistbox"
msgid "X3D File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
msgctxt "@item:inlistbox"
msgid "X-Ray view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
msgctxt "@info:tooltip"
msgid ""
"Some things could be problematic in this print. Click to see tips for "
"adjustment."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
msgctxt "@title:window"
msgid "Open Project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:58
msgctxt "@action:ComboBox Update/override existing profile"
msgid "Update existing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:59
msgctxt "@action:ComboBox Save settings in a new profile"
msgid "Create new"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:70
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:73
msgctxt "@action:title"
msgid "Summary - Cura Project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:92
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
msgctxt "@action:label"
msgid "Printer settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
msgctxt "@info:tooltip"
msgid "How should the conflict in the machine be resolved?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:115
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:124
msgctxt "@action:ComboBox option"
msgid "Update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:116
msgctxt "@action:ComboBox option"
msgid "Create new"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:143
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:106
msgctxt "@action:label"
msgid "Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:159
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
msgctxt "@action:label"
msgid "Printer Group"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:180
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:222
msgctxt "@action:label"
msgid "Profile settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:196
msgctxt "@info:tooltip"
msgid "How should the conflict in the profile be resolved?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:216
#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:323
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:121
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:246
msgctxt "@action:label"
msgid "Name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:263
msgctxt "@action:label"
msgid "Intent"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:246
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:230
msgctxt "@action:label"
msgid "Not in profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:251
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:235
msgctxt "@action:label"
msgid "%1 override"
msgid_plural "%1 overrides"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:262
msgctxt "@action:label"
msgid "Derivative from"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:267
msgctxt "@action:label"
msgid "%1, %2 override"
msgid_plural "%1, %2 overrides"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:283
msgctxt "@action:label"
msgid "Material settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:299
msgctxt "@info:tooltip"
msgid "How should the conflict in the material be resolved?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:342
msgctxt "@action:label"
msgid "Setting visibility"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:351
msgctxt "@action:label"
msgid "Mode"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
msgctxt "@action:label"
msgid "Visible settings:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:372
msgctxt "@action:label"
msgid "%1 out of %2"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
msgctxt "@action:warning"
msgid "Loading a project will clear all models on the build plate."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:416
msgctxt "@action:button"
msgid "Open"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
msgctxt "@button"
msgid "Want more?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
msgctxt "@button"
msgid "Backup Now"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
msgctxt "@checkbox:description"
msgid "Auto Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
msgctxt "@checkbox:description"
msgid "Automatically create a backup each day that Cura is started."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
msgctxt "@button"
msgid "Restore"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
msgctxt "@dialog:title"
msgid "Delete Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
msgctxt "@dialog:info"
msgid "Are you sure you want to delete this backup? This cannot be undone."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
msgctxt "@dialog:title"
msgid "Restore Backup"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
msgctxt "@dialog:info"
msgid ""
"You will need to restart Cura before your backup is restored. Do you want to "
"close Cura now?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
msgctxt "@backuplist:label"
msgid "Cura Version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
msgctxt "@backuplist:label"
msgid "Machines"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
msgctxt "@backuplist:label"
msgid "Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
msgctxt "@backuplist:label"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
msgctxt "@backuplist:label"
msgid "Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
msgctxt "@title:window"
msgid "Cura Backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
msgctxt "@title"
msgid "My Backups"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
msgctxt "@empty_state"
msgid ""
"You don't have any backups currently. Use the 'Backup Now' button to create "
"one."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
msgctxt "@backup_limit_info"
msgid ""
"During the preview phase, you'll be limited to 5 visible backups. Remove a "
"backup to see older ones."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
msgctxt "@description"
msgid "Backup and synchronize your Cura settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:48
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:138
msgctxt "@button"
msgid "Sign in"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
msgctxt "@title"
msgid "Update Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
msgctxt "@label"
msgid ""
"Firmware is the piece of software running directly on your 3D printer. This "
"firmware controls the step motors, regulates the temperature and ultimately "
"makes your printer work."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
msgctxt "@label"
msgid ""
"The firmware shipping with new printers works, but new versions tend to have "
"more features and improvements."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
msgctxt "@action:button"
msgid "Automatically upgrade Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
msgctxt "@action:button"
msgid "Upload custom Firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
msgctxt "@label"
msgid ""
"Firmware can not be updated because there is no connection with the printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
msgctxt "@label"
msgid ""
"Firmware can not be updated because the connection with the printer does not "
"support upgrading firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
msgctxt "@title:window"
msgid "Select custom firmware"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
msgctxt "@title:window"
msgid "Firmware Update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
msgctxt "@label"
msgid "Updating firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
msgctxt "@label"
msgid "Firmware update completed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
msgctxt "@label"
msgid "Firmware update failed due to an unknown error."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
msgctxt "@label"
msgid "Firmware update failed due to an communication error."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
msgctxt "@label"
msgid "Firmware update failed due to an input/output error."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
msgctxt "@label"
msgid "Firmware update failed due to missing firmware."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
msgctxt "@title:window"
msgid "Convert Image..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
msgctxt "@info:tooltip"
msgid "The maximum distance of each pixel from \"Base.\""
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
msgctxt "@action:label"
msgid "Height (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
msgctxt "@info:tooltip"
msgid "The base height from the build plate in millimeters."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
msgctxt "@action:label"
msgid "Base (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
msgctxt "@info:tooltip"
msgid "The width in millimeters on the build plate."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
msgctxt "@action:label"
msgid "Width (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
msgctxt "@info:tooltip"
msgid "The depth in millimeters on the build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
msgctxt "@action:label"
msgid "Depth (mm)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
msgctxt "@info:tooltip"
msgid ""
"For lithophanes dark pixels should correspond to thicker locations in order "
"to block more light coming through. For height maps lighter pixels signify "
"higher terrain, so lighter pixels should correspond to thicker locations in "
"the generated 3D model."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
msgctxt "@item:inlistbox"
msgid "Darker is higher"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
msgctxt "@item:inlistbox"
msgid "Lighter is higher"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
msgctxt "@info:tooltip"
msgid ""
"For lithophanes a simple logarithmic model for translucency is available. "
"For height maps the pixel values correspond to heights linearly."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
msgctxt "@item:inlistbox"
msgid "Linear"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
msgctxt "@item:inlistbox"
msgid "Translucency"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
msgctxt "@info:tooltip"
msgid ""
"The percentage of light penetrating a print with a thickness of 1 "
"millimeter. Lowering this value increases the contrast in dark regions and "
"decreases the contrast in light regions of the image."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
msgctxt "@action:label"
msgid "1mm Transmittance (%)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
msgctxt "@info:tooltip"
msgid "The amount of smoothing to apply to the image."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
msgctxt "@action:label"
msgid "Smoothing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227
#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
msgctxt "@action:button"
msgid "OK"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
msgctxt "@title:tab"
msgid "Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
msgctxt "@title:label"
msgid "Nozzle Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
msgctxt "@label"
msgid "Nozzle size"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
msgctxt "@label"
msgid "mm"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
msgctxt "@label"
msgid "Compatible material diameter"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
msgctxt "@label"
msgid "Nozzle offset X"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
msgctxt "@label"
msgid "Nozzle offset Y"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
msgctxt "@label"
msgid "Cooling Fan Number"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
msgctxt "@title:label"
msgid "Extruder Start G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
msgctxt "@title:label"
msgid "Extruder End G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
msgctxt "@title:label"
msgid "Printer Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
msgctxt "@label"
msgid "X (Width)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
msgctxt "@label"
msgid "Y (Depth)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
msgctxt "@label"
msgid "Z (Height)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
msgctxt "@label"
msgid "Build plate shape"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
msgctxt "@label"
msgid "Origin at center"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
msgctxt "@label"
msgid "Heated bed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
msgctxt "@label"
msgid "Heated build volume"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
msgctxt "@label"
msgid "G-code flavor"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
msgctxt "@title:label"
msgid "Printhead Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
msgctxt "@label"
msgid "X min"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
msgctxt "@label"
msgid "Y min"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
msgctxt "@label"
msgid "X max"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
msgctxt "@label"
msgid "Y max"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
msgctxt "@label"
msgid "Gantry Height"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
msgctxt "@label"
msgid "Number of Extruders"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:339
msgctxt "@label"
msgid "Shared Heater"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:365
msgctxt "@title:label"
msgid "Start G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:376
msgctxt "@title:label"
msgid "End G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
msgctxt "@info"
msgid ""
"Please make sure your printer has a connection:\n"
"- Check if the printer is turned on.\n"
"- Check if the printer is connected to the network.\n"
"- Check if you are signed in to discover cloud-connected printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
msgctxt "@info"
msgid "Please connect your printer to the network."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:156
msgctxt "@label link to technical assistance"
msgid "View user manuals online"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:45
msgctxt "@label"
msgid "Mesh Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:75
msgctxt "@label"
msgid "Normal model"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:87
msgctxt "@label"
msgid "Print as support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:99
msgctxt "@label"
msgid "Modify settings for overlaps"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
msgctxt "@label"
msgid "Don't support overlaps"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:142
msgctxt "@item:inlistbox"
msgid "Infill mesh only"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:143
msgctxt "@item:inlistbox"
msgid "Cutting mesh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:373
msgctxt "@action:button"
msgid "Select settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
msgctxt "@title:window"
msgid "Select Settings to Customize for this model"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
msgctxt "@label:textbox"
msgid "Filter..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:70
msgctxt "@label:checkbox"
msgid "Show all"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
msgctxt "@title:window"
msgid "Post Processing Plugin"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
msgctxt "@label"
msgid "Post Processing Scripts"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
msgctxt "@action"
msgid "Add a script"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
msgctxt "@label"
msgid "Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
msgctxt "@info:tooltip"
msgid "Change active post-processing scripts."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
msgctxt "@info:tooltip"
msgid "The following script is active:"
msgid_plural "The following scripts are active:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
msgctxt "@label"
msgid "Color scheme"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
msgctxt "@label:listbox"
msgid "Material Color"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
msgctxt "@label:listbox"
msgid "Line Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
msgctxt "@label:listbox"
msgid "Speed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
msgctxt "@label:listbox"
msgid "Layer thickness"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
msgctxt "@label"
msgid "Compatibility Mode"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
msgctxt "@label"
msgid "Travels"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
msgctxt "@label"
msgid "Helpers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
msgctxt "@label"
msgid "Shell"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
msgctxt "@label"
msgid "Infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
msgctxt "@label"
msgid "Only Show Top Layers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
msgctxt "@label"
msgid "Show 5 Detailed Layers On Top"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
msgctxt "@label"
msgid "Top / Bottom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
msgctxt "@label"
msgid "Inner Wall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
msgctxt "@label"
msgid "min"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
msgctxt "@label"
msgid "max"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
msgctxt "@title:window"
msgid "More information on anonymous data collection"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
msgctxt "@text:window"
msgid ""
"Ultimaker Cura collects anonymous data in order to improve the print quality "
"and user experience. Below is an example of all the data that is shared:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
msgctxt "@text:window"
msgid "I don't want to send anonymous data"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
msgctxt "@text:window"
msgid "Allow sending anonymous data"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
msgctxt "@label"
msgid "You need to login first before you can rate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/RatingWidget.qml:54
msgctxt "@label"
msgid "You need to install the package before you can rate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/SmallRatingWidget.qml:27
msgctxt "@label"
msgid "ratings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
msgctxt "@action:button"
msgid "Back"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
msgctxt "@label"
msgid "Compatibility"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
msgctxt "@label:table_header"
msgid "Machine"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
msgctxt "@label:table_header"
msgid "Build Plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
msgctxt "@label:table_header"
msgid "Support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
msgctxt "@label:table_header"
msgid "Quality"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
msgctxt "@action:label"
msgid "Technical Data Sheet"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
msgctxt "@action:label"
msgid "Safety Data Sheet"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
msgctxt "@action:label"
msgid "Printing Guidelines"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
msgctxt "@action:label"
msgid "Website"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
msgctxt "@action:button"
msgid "Installed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
msgid "<a href='%1'>Log in</a> is required to install or update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
msgid "<a href='%1'>Buy material spools</a>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
msgctxt "@action:button"
msgid "Update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
msgctxt "@action:button"
msgid "Updating"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
msgctxt "@action:button"
msgid "Updated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
msgctxt "@label"
msgid "Featured"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
msgctxt "@info:tooltip"
msgid "Go to Web Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
msgctxt "@label"
msgid "Search materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
msgctxt "@info"
msgid "You will need to restart Cura before changes in packages have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
msgctxt "@info:button, %1 is the application name"
msgid "Quit %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:34
msgctxt "@title:tab"
msgid "Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:79
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:442
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
msgctxt "@title:tab"
msgid "Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
msgctxt "@title:tab"
msgid "Installed"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
msgctxt "@label"
msgid "Will install upon restarting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
msgid "<a href='%1'>Log in</a> is required to update"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
msgctxt "@action:button"
msgid "Downgrade"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
msgctxt "@action:button"
msgid "Uninstall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
msgctxt "@action:button"
msgid "Install"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
msgctxt "@title"
msgid "Changes from your account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
msgctxt "@button"
msgid "Dismiss"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
msgctxt "@button"
msgid "Next"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
msgctxt "@label"
msgid "The following packages will be added:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
msgctxt "@label"
msgid ""
"The following packages can not be installed because of an incompatible Cura "
"version:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
msgctxt "@title:window"
msgid "Confirm uninstall"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
msgctxt "@text:window"
msgid ""
"You are uninstalling materials and/or profiles that are still in use. "
"Confirming will reset the following materials/profiles to their defaults."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
msgctxt "@text:window"
msgid "Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
msgctxt "@text:window"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
msgctxt "@action:button"
msgid "Confirm"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
msgctxt "@label"
msgid "You need to accept the license to install the package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:93
msgctxt "@label"
msgid "Website"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:100
msgctxt "@label"
msgid "Email"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:97
msgctxt "@label"
msgid "Your rating"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:105
msgctxt "@label"
msgid "Version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:112
msgctxt "@label"
msgid "Last updated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:119
msgctxt "@label"
msgid "Author"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:126
msgctxt "@label"
msgid "Downloads"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
msgctxt "@label"
msgid "Community Contributions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
msgctxt "@label"
msgid "Community Plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
msgctxt "@label"
msgid "Generic Materials"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
msgctxt "@info"
msgid ""
"Could not connect to the Cura Package database. Please check your connection."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:16
msgctxt "@info"
msgid "Fetching packages..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:31
msgctxt "@description"
msgid "Get plugins and materials verified by Ultimaker"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
msgctxt "@title"
msgid "Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
msgctxt "@title"
msgid "Build Plate Leveling"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
msgctxt "@label"
msgid ""
"To make sure your prints will come out great, you can now adjust your "
"buildplate. When you click 'Move to Next Position' the nozzle will move to "
"the different positions that can be adjusted."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
msgctxt "@label"
msgid ""
"For every position; insert a piece of paper under the nozzle and adjust the "
"print build plate height. The print build plate height is right when the "
"paper is slightly gripped by the tip of the nozzle."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
msgctxt "@action:button"
msgid "Start Build Plate Leveling"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
msgctxt "@action:button"
msgid "Move to Next Position"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
msgctxt "@label"
msgid "Please select any upgrades made to this Ultimaker Original"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
msgctxt "@label"
msgid "Heated Build Plate (official kit or self-built)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
msgctxt "@title:window"
msgid "Connect to Networked Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
msgctxt "@label"
msgid ""
"To print directly to your printer over the network, please make sure your "
"printer is connected to the network using a network cable or by connecting "
"your printer to your WIFI network. If you don't connect Cura with your "
"printer, you can still use a USB drive to transfer g-code files to your "
"printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
msgctxt "@label"
msgid "Select your printer from the list below:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
msgctxt "@action:button"
msgid "Edit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
msgctxt "@action:button"
msgid "Remove"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
msgctxt "@action:button"
msgid "Refresh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
msgctxt "@label"
msgid ""
"If your printer is not listed, read the <a href='%1'>network printing "
"troubleshooting guide</a>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
msgctxt "@label"
msgid "Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
msgctxt "@label"
msgid "Firmware version"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
msgctxt "@label"
msgid "Address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
msgctxt "@label"
msgid "This printer is not set up to host a group of printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
msgctxt "@label"
msgid "This printer is the host for a group of %1 printers."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
msgctxt "@label"
msgid "The printer at this address has not yet responded."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
msgctxt "@action:button"
msgid "Connect"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
msgctxt "@title:window"
msgid "Invalid IP address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
msgctxt "@text"
msgid "Please enter a valid IP address."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
msgctxt "@title:window"
msgid "Printer Address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
msgctxt "@label"
msgid "Enter the IP address of your printer on the network."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
msgctxt "@title:window"
msgid "Configuration Changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
msgctxt "@action:button"
msgid "Override"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
msgctxt "@label"
msgid "The assigned printer, %1, requires the following configuration change:"
msgid_plural ""
"The assigned printer, %1, requires the following configuration changes:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
msgctxt "@label"
msgid ""
"The printer %1 is assigned, but the job contains an unknown material "
"configuration."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
msgctxt "@label"
msgid "Change material %1 from %2 to %3."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
msgctxt "@label"
msgid "Load %3 as material %1 (This cannot be overridden)."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
msgctxt "@label"
msgid "Change print core %1 from %2 to %3."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
msgctxt "@label"
msgid "Change build plate to %1 (This cannot be overridden)."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
msgctxt "@label"
msgid ""
"Override will use the specified settings with the existing printer "
"configuration. This may result in a failed print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:192
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
msgctxt "@label"
msgid "Glass"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
msgctxt "@label"
msgid "Aluminum"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
msgctxt "@label"
msgid "Move to top"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
msgctxt "@label"
msgid "Delete"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
msgctxt "@label"
msgid "Resume"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
msgctxt "@label"
msgid "Pausing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
msgctxt "@label"
msgid "Resuming..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
msgctxt "@label"
msgid "Pause"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
msgctxt "@label"
msgid "Aborting..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
msgctxt "@label"
msgid "Abort"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to move %1 to the top of the queue?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
msgctxt "@window:title"
msgid "Move print job to top"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to delete %1?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
msgctxt "@window:title"
msgid "Delete print job"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
msgctxt "@label %1 is the name of a print job."
msgid "Are you sure you want to abort %1?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
msgctxt "@window:title"
msgid "Abort print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:155
msgctxt "@label link to Connect and Cloud interfaces"
msgid "Manage printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:256
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:514
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
msgctxt "@info"
msgid "Please update your printer's firmware to manage the queue remotely."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:289
msgctxt "@info"
msgid "The webcam is not available because you are monitoring a cloud printer."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
msgctxt "@label:status"
msgid "Loading..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
msgctxt "@label:status"
msgid "Unavailable"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
msgctxt "@label:status"
msgid "Unreachable"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
msgctxt "@label:status"
msgid "Idle"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:401
msgctxt "@label"
msgid "Untitled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:422
msgctxt "@label"
msgid "Anonymous"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:449
msgctxt "@label:status"
msgid "Requires configuration changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:487
msgctxt "@action:button"
msgid "Details"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
msgctxt "@label"
msgid "Unavailable printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
msgctxt "@label"
msgid "First available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
msgctxt "@label:status"
msgid "Aborted"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
msgctxt "@label:status"
msgid "Finished"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
msgctxt "@label:status"
msgid "Preparing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
msgctxt "@label:status"
msgid "Aborting..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
msgctxt "@label:status"
msgid "Pausing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
msgctxt "@label:status"
msgid "Paused"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
msgctxt "@label:status"
msgid "Resuming..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
msgctxt "@label:status"
msgid "Action required"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
msgctxt "@label:status"
msgid "Finishes %1 at %2"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
msgctxt "@label"
msgid "Queued"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:67
msgctxt "@label link to connect manager"
msgid "Manage in browser"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:100
msgctxt "@label"
msgid "There are no print jobs in the queue. Slice and send a job to add one."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:115
msgctxt "@label"
msgid "Print jobs"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:131
msgctxt "@label"
msgid "Total print time"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:147
msgctxt "@label"
msgid "Waiting for"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
msgctxt "@title:window"
msgid "Print over network"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
msgctxt "@action:button"
msgid "Print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
msgctxt "@label"
msgid "Printer selection"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
msgctxt "@action:button"
msgid "Sign in"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
msgctxt "@label"
msgid "Your key to connected 3D printing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
msgctxt "@text"
msgid ""
"- Customize your experience with more print profiles and plugins\n"
"- Stay flexible by syncing your setup and loading it anywhere\n"
"- Increase efficiency with a remote workflow on Ultimaker printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78
msgctxt "@button"
msgid "Create account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:22
msgctxt "@label The argument is a username."
msgid "Hi %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:33
msgctxt "@button"
msgid "Ultimaker account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:42
msgctxt "@button"
msgid "Sign out"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
msgctxt "@label"
msgid "No time estimation available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
msgctxt "@label"
msgid "No cost estimation available"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
msgctxt "@button"
msgid "Preview"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
msgctxt "@label"
msgid "Time estimation"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
msgctxt "@label"
msgid "Material estimation"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
msgctxt "@label m for meter"
msgid "%1m"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
msgctxt "@label g for grams"
msgid "%1g"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
msgctxt "@label:PrintjobStatus"
msgid "Slicing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
msgctxt "@label:PrintjobStatus"
msgid "Unable to slice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
msgctxt "@button"
msgid "Processing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
msgctxt "@button"
msgid "Slice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
msgctxt "@label"
msgid "Start the slicing process"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
msgctxt "@button"
msgid "Cancel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
msgctxt "@action:inmenu"
msgid "Show Online Troubleshooting Guide"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
msgctxt "@action:inmenu"
msgid "Toggle Full Screen"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
msgctxt "@action:inmenu"
msgid "Exit Full Screen"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
msgctxt "@action:inmenu menubar:edit"
msgid "&Undo"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
msgctxt "@action:inmenu menubar:edit"
msgid "&Redo"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
msgctxt "@action:inmenu menubar:file"
msgid "&Quit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
msgctxt "@action:inmenu menubar:view"
msgid "3D View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
msgctxt "@action:inmenu menubar:view"
msgid "Front View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
msgctxt "@action:inmenu menubar:view"
msgid "Top View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
msgctxt "@action:inmenu menubar:view"
msgid "Left Side View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
msgctxt "@action:inmenu menubar:view"
msgid "Right Side View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
msgctxt "@action:inmenu"
msgid "Configure Cura..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
msgctxt "@action:inmenu menubar:printer"
msgid "&Add Printer..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
msgctxt "@action:inmenu menubar:printer"
msgid "Manage Pr&inters..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
msgctxt "@action:inmenu"
msgid "Manage Materials..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
msgctxt "@action:inmenu"
msgid "Add more materials from Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
msgctxt "@action:inmenu menubar:profile"
msgid "&Update profile with current settings/overrides"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
msgctxt "@action:inmenu menubar:profile"
msgid "&Discard current changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
msgctxt "@action:inmenu menubar:profile"
msgid "&Create profile from current settings/overrides..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
msgctxt "@action:inmenu menubar:profile"
msgid "Manage Profiles..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
msgctxt "@action:inmenu menubar:help"
msgid "Show Online &Documentation"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
msgctxt "@action:inmenu menubar:help"
msgid "Report a &Bug"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
msgctxt "@action:inmenu menubar:help"
msgid "What's New"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
msgctxt "@action:inmenu menubar:help"
msgid "About..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
msgctxt "@action:inmenu menubar:edit"
msgid "Delete Selected Model"
msgid_plural "Delete Selected Models"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
msgctxt "@action:inmenu menubar:edit"
msgid "Center Selected Model"
msgid_plural "Center Selected Models"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
msgctxt "@action:inmenu menubar:edit"
msgid "Multiply Selected Model"
msgid_plural "Multiply Selected Models"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
msgctxt "@action:inmenu"
msgid "Delete Model"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
msgctxt "@action:inmenu"
msgid "Ce&nter Model on Platform"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
msgctxt "@action:inmenu menubar:edit"
msgid "&Group Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
msgctxt "@action:inmenu menubar:edit"
msgid "Ungroup Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
msgctxt "@action:inmenu menubar:edit"
msgid "&Merge Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
msgctxt "@action:inmenu"
msgid "&Multiply Model..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
msgctxt "@action:inmenu menubar:edit"
msgid "Select All Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
msgctxt "@action:inmenu menubar:edit"
msgid "Clear Build Plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
msgctxt "@action:inmenu menubar:file"
msgid "Reload All Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange All Models To All Build Plates"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange All Models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
msgctxt "@action:inmenu menubar:edit"
msgid "Arrange Selection"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Positions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
msgctxt "@action:inmenu menubar:edit"
msgid "Reset All Model Transformations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
msgctxt "@action:inmenu menubar:file"
msgid "&Open File(s)..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
msgctxt "@action:inmenu menubar:file"
msgid "&New Project..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
msgctxt "@action:inmenu menubar:help"
msgid "Show Configuration Folder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:545
msgctxt "@action:menu"
msgid "Configure setting visibility..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
msgctxt "@action:menu"
msgid "&Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:242
msgctxt "@label"
msgid "This package will be installed after restarting."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:435
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
msgctxt "@title:tab"
msgid "General"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:438
msgctxt "@title:tab"
msgid "Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:440
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
msgctxt "@title:tab"
msgid "Printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:444
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
msgctxt "@title:tab"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:563
msgctxt "@title:window %1 is the application name"
msgid "Closing %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:564
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:576
msgctxt "@label %1 is the application name"
msgid "Are you sure you want to exit %1?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:614
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
msgctxt "@title:window"
msgid "Open file(s)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:720
msgctxt "@window:title"
msgid "Install Package"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:728
msgctxt "@title:window"
msgid "Open File(s)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:731
msgctxt "@text:window"
msgid ""
"We have found one or more G-Code files within the files you have selected. "
"You can only open one G-Code file at a time. If you want to open a G-Code "
"file, please just select only one."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:834
msgctxt "@title:window"
msgid "Add Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:842
msgctxt "@title:window"
msgid "What's New"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
msgctxt "@title:window The argument is the application name."
msgid "About %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
msgctxt "@label"
msgid "version: %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
msgctxt "@label"
msgid "End-to-end solution for fused filament 3D printing."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
msgctxt "@info:credit"
msgid ""
"Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
"Cura proudly uses the following open source projects:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
msgctxt "@label"
msgid "Graphical user interface"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
msgctxt "@label"
msgid "Application framework"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
msgctxt "@label"
msgid "G-code generator"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
msgctxt "@label"
msgid "Interprocess communication library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
msgctxt "@label"
msgid "Programming language"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
msgctxt "@label"
msgid "GUI framework"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
msgctxt "@label"
msgid "GUI framework bindings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
msgctxt "@label"
msgid "C/C++ Binding library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
msgctxt "@label"
msgid "Data interchange format"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
msgctxt "@label"
msgid "Support library for scientific computing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
msgctxt "@label"
msgid "Support library for faster math"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
msgctxt "@label"
msgid "Support library for handling STL files"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
msgctxt "@label"
msgid "Support library for handling planar objects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
msgctxt "@label"
msgid "Support library for handling triangular meshes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
msgctxt "@label"
msgid "Support library for analysis of complex networks"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
msgctxt "@label"
msgid "Support library for handling 3MF files"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
msgctxt "@label"
msgid "Support library for file metadata and streaming"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
msgctxt "@label"
msgid "Serial communication library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
msgctxt "@label"
msgid "ZeroConf discovery library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
msgctxt "@label"
msgid "Polygon clipping library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
msgctxt "@Label"
msgid "Python HTTP library"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
msgctxt "@label"
msgid "Font"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
msgctxt "@label"
msgid "SVG icons"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
msgctxt "@label"
msgid "Linux cross-distribution application deployment"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
msgctxt "@title:window"
msgid "Open project file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
msgctxt "@text:window"
msgid ""
"This is a Cura project file. Would you like to open it as a project or "
"import the models from it?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
msgctxt "@text:window"
msgid "Remember my choice"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
msgctxt "@action:button"
msgid "Open as project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
msgctxt "@action:button"
msgid "Import models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
msgctxt "@title:window"
msgid "Discard or Keep changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
msgctxt "@text:window"
msgid ""
"You have customized some profile settings.\n"
"Would you like to keep or discard those settings?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
msgctxt "@title:column"
msgid "Profile settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:116
msgctxt "@title:column"
msgid "Default"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:123
msgctxt "@title:column"
msgid "Customized"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:156
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:708
msgctxt "@option:discardOrKeep"
msgid "Always ask me this"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:157
msgctxt "@option:discardOrKeep"
msgid "Discard and never ask again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
msgctxt "@option:discardOrKeep"
msgid "Keep and never ask again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:195
msgctxt "@action:button"
msgid "Discard"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:208
msgctxt "@action:button"
msgid "Keep"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:221
msgctxt "@action:button"
msgid "Create New Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
msgctxt "@text:window"
msgid ""
"We have found one or more project file(s) within the files you have "
"selected. You can open only one project file at a time. We suggest to only "
"import models from those files. Would you like to proceed?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
msgctxt "@action:button"
msgid "Import all as models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
msgctxt "@title:window"
msgid "Save Project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:177
msgctxt "@action:label"
msgid "Extruder %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
msgctxt "@action:label"
msgid "%1 & material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:195
msgctxt "@action:label"
msgid "Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:285
msgctxt "@action:label"
msgid "Don't show project summary on save again"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:304
msgctxt "@action:button"
msgid "Save"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
msgctxt "@label %1 is filled in with the name of an extruder"
msgid "Print Selected Model with %1"
msgid_plural "Print Selected Models with %1"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
msgctxt "@text Print job name"
msgid "Untitled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&File"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
msgctxt "@title:menu menubar:toplevel"
msgid "&Edit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:48
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
msgctxt "@title:menu menubar:toplevel"
msgid "&View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:50
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
msgctxt "@title:menu menubar:toplevel"
msgid "&Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:55
msgctxt "@title:menu menubar:toplevel"
msgid "E&xtensions"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:93
msgctxt "@title:menu menubar:toplevel"
msgid "P&references"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:101
msgctxt "@title:menu menubar:toplevel"
msgid "&Help"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:147
msgctxt "@title:window"
msgid "New project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
msgctxt "@info:question"
msgid ""
"Are you sure you want to start a new project? This will clear the build "
"plate and any unsaved settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
msgctxt "@action:button"
msgid "Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
msgctxt "@header"
msgid "Configurations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
msgctxt "@label"
msgid ""
"This configuration is not available because %1 is not recognized. Please "
"visit %2 to download the correct material profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
msgctxt "@label"
msgid "Marketplace"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
msgctxt "@label"
msgid "Loading available configurations from the printer..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
msgctxt "@label"
msgid ""
"The configurations are not available because the printer is disconnected."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
msgctxt "@label"
msgid "Select configuration"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
msgctxt "@label"
msgid "Configurations"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
msgctxt "@header"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
msgctxt "@label"
msgid "Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
msgctxt "@label"
msgid "Enabled"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:251
msgctxt "@label"
msgid "Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:378
msgctxt "@label"
msgid "Use glue for better adhesion with this material combination."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
msgctxt "@label"
msgid "Print Selected Model With:"
msgid_plural "Print Selected Models With:"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
msgctxt "@title:window"
msgid "Multiply Selected Model"
msgid_plural "Multiply Selected Models"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
msgctxt "@label"
msgid "Number of Copies"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
msgctxt "@title:menu menubar:file"
msgid "&Save..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
msgctxt "@title:menu menubar:file"
msgid "&Export..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
msgctxt "@action:inmenu menubar:file"
msgid "Export Selection..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
msgctxt "@label:category menu label"
msgid "Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
msgctxt "@label:category menu label"
msgid "Favorites"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
msgctxt "@label:category menu label"
msgid "Generic"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
msgctxt "@label:category menu label"
msgid "Network enabled printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
msgctxt "@label:category menu label"
msgid "Local printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
msgctxt "@title:menu menubar:file"
msgid "Open &Recent"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
msgctxt "@title:menu menubar:settings"
msgid "&Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:27
msgctxt "@title:menu"
msgid "&Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:36
msgctxt "@action:inmenu"
msgid "Set as Active Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:42
msgctxt "@action:inmenu"
msgid "Enable Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
msgctxt "@action:inmenu"
msgid "Disable Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
msgctxt "@action:inmenu"
msgid "Visible Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
msgctxt "@action:inmenu"
msgid "Collapse All Categories"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
msgctxt "@action:inmenu"
msgid "Manage Setting Visibility..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
msgctxt "@action:inmenu menubar:view"
msgid "&Camera position"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
msgctxt "@action:inmenu menubar:view"
msgid "Camera view"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
msgctxt "@action:inmenu menubar:view"
msgid "Perspective"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
msgctxt "@action:inmenu menubar:view"
msgid "Orthographic"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
msgctxt "@action:inmenu menubar:view"
msgid "&Build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
msgctxt "@label:MonitorStatus"
msgid "Not connected to a printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
msgctxt "@label:MonitorStatus"
msgid "Printer does not accept commands"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
msgctxt "@label:MonitorStatus"
msgid "In maintenance. Please check the printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
msgctxt "@label:MonitorStatus"
msgid "Lost connection with the printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
msgctxt "@label:MonitorStatus"
msgid "Printing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
msgctxt "@label:MonitorStatus"
msgid "Paused"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
msgctxt "@label:MonitorStatus"
msgid "Preparing..."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
msgctxt "@label:MonitorStatus"
msgid "Please remove the print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
msgctxt "@label"
msgid "Abort Print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
msgctxt "@label"
msgid "Are you sure you want to abort the print?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
msgctxt "@label"
msgid "Object list"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:132
msgctxt "@label"
msgid "Interface"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:211
msgctxt "@label"
msgid "Currency:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:224
msgctxt "@label"
msgid "Theme:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:280
msgctxt "@label"
msgid ""
"You will need to restart the application for these changes to have effect."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:297
msgctxt "@info:tooltip"
msgid "Slice automatically when changing settings."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:305
msgctxt "@option:check"
msgid "Slice automatically"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:319
msgctxt "@label"
msgid "Viewport behavior"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:327
msgctxt "@info:tooltip"
msgid ""
"Highlight unsupported areas of the model in red. Without support these areas "
"will not print properly."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:336
msgctxt "@option:check"
msgid "Display overhang"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:344
msgctxt "@info:tooltip"
msgid ""
"Moves the camera so the model is in the center of the view when a model is "
"selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:349
msgctxt "@action:button"
msgid "Center camera when item is selected"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:359
msgctxt "@info:tooltip"
msgid "Should the default zoom behavior of cura be inverted?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:364
msgctxt "@action:button"
msgid "Invert the direction of camera zoom."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
msgctxt "@info:tooltip"
msgid "Should zooming move in the direction of the mouse?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:380
msgctxt "@info:tooltip"
msgid ""
"Zooming towards the mouse is not supported in the orthographic perspective."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:385
msgctxt "@action:button"
msgid "Zoom toward mouse direction"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
msgctxt "@info:tooltip"
msgid ""
"Should models on the platform be moved so that they no longer intersect?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
msgctxt "@option:check"
msgid "Ensure models are kept apart"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:425
msgctxt "@info:tooltip"
msgid "Should models on the platform be moved down to touch the build plate?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:430
msgctxt "@option:check"
msgid "Automatically drop models to the build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:442
msgctxt "@info:tooltip"
msgid "Show caution message in g-code reader."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:451
msgctxt "@option:check"
msgid "Caution message in g-code reader"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:459
msgctxt "@info:tooltip"
msgid "Should layer be forced into compatibility mode?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:464
msgctxt "@option:check"
msgid "Force layer view compatibility mode (restart required)"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:474
msgctxt "@info:tooltip"
msgid "Should Cura open at the location it was closed?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:479
msgctxt "@option:check"
msgid "Restore window position on start"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:489
msgctxt "@info:tooltip"
msgid "What type of camera rendering should be used?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:496
msgctxt "@window:text"
msgid "Camera rendering:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:507
msgid "Perspective"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:508
msgid "Orthographic"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:539
msgctxt "@label"
msgid "Opening and saving files"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:546
msgctxt "@info:tooltip"
msgid "Should models be scaled to the build volume if they are too large?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:551
msgctxt "@option:check"
msgid "Scale large models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:561
msgctxt "@info:tooltip"
msgid ""
"An model may appear extremely small if its unit is for example in meters "
"rather than millimeters. Should these models be scaled up?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:566
msgctxt "@option:check"
msgid "Scale extremely small models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:576
msgctxt "@info:tooltip"
msgid "Should models be selected after they are loaded?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:581
msgctxt "@option:check"
msgid "Select models when loaded"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:591
msgctxt "@info:tooltip"
msgid ""
"Should a prefix based on the printer name be added to the print job name "
"automatically?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
msgctxt "@option:check"
msgid "Add machine prefix to job name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:606
msgctxt "@info:tooltip"
msgid "Should a summary be shown when saving a project file?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:610
msgctxt "@option:check"
msgid "Show summary dialog when saving project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
msgctxt "@info:tooltip"
msgid "Default behavior when opening a project file"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:628
msgctxt "@window:text"
msgid "Default behavior when opening a project file: "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:642
msgctxt "@option:openProject"
msgid "Always ask me this"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:643
msgctxt "@option:openProject"
msgid "Always open as a project"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:644
msgctxt "@option:openProject"
msgid "Always import models"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680
msgctxt "@info:tooltip"
msgid ""
"When you have made changes to a profile and switched to a different one, a "
"dialog will be shown asking whether you want to keep your modifications or "
"not, or you can choose a default behaviour and never show that dialog again."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:689
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
msgctxt "@label"
msgid "Profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:694
msgctxt "@window:text"
msgid ""
"Default behavior for changed setting values when switching to a different "
"profile: "
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
msgctxt "@option:discardOrKeep"
msgid "Always discard changed settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:710
msgctxt "@option:discardOrKeep"
msgid "Always transfer changed settings to new profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:744
msgctxt "@label"
msgid "Privacy"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:751
msgctxt "@info:tooltip"
msgid "Should Cura check for updates when the program is started?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:756
msgctxt "@option:check"
msgid "Check for updates on start"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:766
msgctxt "@info:tooltip"
msgid ""
"Should anonymous data about your print be sent to Ultimaker? Note, no "
"models, IP addresses or other personally identifiable information is sent or "
"stored."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771
msgctxt "@option:check"
msgid "Send (anonymous) print information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780
msgctxt "@action:button"
msgid "More information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
msgctxt "@action:button"
msgid "Activate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
msgctxt "@action:button"
msgid "Rename"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
msgctxt "@action:button"
msgid "Create"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
msgctxt "@action:button"
msgid "Duplicate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
msgctxt "@action:button"
msgid "Import"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
msgctxt "@action:button"
msgid "Export"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
msgctxt "@action:label"
msgid "Printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
msgctxt "@title:window"
msgid "Confirm Remove"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
msgctxt "@label (%1 is object name)"
msgid "Are you sure you wish to remove %1? This cannot be undone!"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
msgctxt "@title:window"
msgid "Import Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
msgid ""
"Could not import material <filename>%1</filename>: <message>%2</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully imported material <filename>%1</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
msgctxt "@title:window"
msgid "Export Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
msgid ""
"Failed to export material to <filename>%1</filename>: <message>%2</message>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
msgctxt "@info:status Don't translate the XML tag <filename>!"
msgid "Successfully exported material to <filename>%1</filename>"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
msgctxt "@title"
msgid "Information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
msgctxt "@title:window"
msgid "Confirm Diameter Change"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
msgctxt "@label (%1 is a number)"
msgid ""
"The new filament diameter is set to %1 mm, which is not compatible with the "
"current extruder. Do you wish to continue?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
msgctxt "@label"
msgid "Display Name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
msgctxt "@label"
msgid "Brand"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
msgctxt "@label"
msgid "Material Type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
msgctxt "@label"
msgid "Color"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
msgctxt "@label"
msgid "Properties"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
msgctxt "@label"
msgid "Density"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
msgctxt "@label"
msgid "Diameter"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
msgctxt "@label"
msgid "Filament Cost"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
msgctxt "@label"
msgid "Filament weight"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
msgctxt "@label"
msgid "Filament length"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
msgctxt "@label"
msgid "Cost per Meter"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
msgctxt "@label"
msgid "This material is linked to %1 and shares some of its properties."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
msgctxt "@label"
msgid "Unlink Material"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
msgctxt "@label"
msgid "Description"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
msgctxt "@label"
msgid "Adhesion Information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
msgctxt "@label"
msgid "Print settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
msgctxt "@label"
msgid "Create"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
msgctxt "@label"
msgid "Duplicate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
msgctxt "@title:window"
msgid "Create Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
msgctxt "@info"
msgid "Please provide a name for this profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
msgctxt "@title:window"
msgid "Duplicate Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
msgctxt "@title:window"
msgid "Rename Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
msgctxt "@title:window"
msgid "Import Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
msgctxt "@title:window"
msgid "Export Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
msgctxt "@label %1 is printer name"
msgid "Printer: %1"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
msgctxt "@action:button"
msgid "Update profile with current settings/overrides"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:258
msgctxt "@action:button"
msgid "Discard current changes"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
msgctxt "@action:label"
msgid ""
"This profile uses the defaults specified by the printer, so it has no "
"settings/overrides in the list below."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
msgctxt "@action:label"
msgid "Your current settings match the selected profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
msgctxt "@title:tab"
msgid "Global Settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
msgctxt "@info:status"
msgid "Calculated"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
msgctxt "@title:column"
msgid "Setting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
msgctxt "@title:column"
msgid "Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
msgctxt "@title:column"
msgid "Current"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
msgctxt "@title:column"
msgid "Unit"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
msgctxt "@title:tab"
msgid "Setting Visibility"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
msgctxt "@label:textbox"
msgid "Check all"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
msgctxt "@label"
msgid "Extruder"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
msgctxt "@tooltip"
msgid ""
"The target temperature of the hotend. The hotend will heat up or cool down "
"towards this temperature. If this is 0, the hotend heating is turned off."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
msgctxt "@tooltip"
msgid "The current temperature of this hotend."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the hotend to."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
msgctxt "@button Cancel pre-heating"
msgid "Cancel"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
msgctxt "@button"
msgid "Pre-heat"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
msgctxt "@tooltip of pre-heat"
msgid ""
"Heat the hotend in advance before printing. You can continue adjusting your "
"print while it is heating, and you won't have to wait for the hotend to heat "
"up when you're ready to print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
msgctxt "@tooltip"
msgid "The colour of the material in this extruder."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
msgctxt "@tooltip"
msgid "The material in this extruder."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
msgctxt "@tooltip"
msgid "The nozzle inserted in this extruder."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
msgctxt "@label"
msgid "Build plate"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
msgctxt "@tooltip"
msgid ""
"The target temperature of the heated bed. The bed will heat up or cool down "
"towards this temperature. If this is 0, the bed heating is turned off."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
msgctxt "@tooltip"
msgid "The current temperature of the heated bed."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
msgctxt "@tooltip of temperature input"
msgid "The temperature to pre-heat the bed to."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
msgctxt "@tooltip of pre-heat"
msgid ""
"Heat the bed in advance before printing. You can continue adjusting your "
"print while it is heating, and you won't have to wait for the bed to heat up "
"when you're ready to print."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
msgctxt "@label"
msgid "Printer control"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
msgctxt "@label"
msgid "Jog Position"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
msgctxt "@label"
msgid "X/Y"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
msgctxt "@label"
msgid "Z"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
msgctxt "@label"
msgid "Jog Distance"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
msgctxt "@label"
msgid "Send G-code"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
msgctxt "@tooltip of G-code command input"
msgid ""
"Send a custom G-code command to the connected printer. Press 'enter' to send "
"the command."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
msgctxt "@info:status"
msgid "The printer is not connected."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:166
msgctxt "@button"
msgid "Add printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:182
msgctxt "@button"
msgid "Manage printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
msgctxt "@label"
msgid "Connected printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
msgctxt "@label"
msgid "Preset printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
msgctxt "@label"
msgid "Active print"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
msgctxt "@label"
msgid "Job Name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
msgctxt "@label"
msgid "Printing Time"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
msgctxt "@label"
msgid "Estimated time left"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
msgctxt "@label"
msgid "Profile"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:172
msgctxt "@tooltip"
msgid ""
"Some setting/override values are different from the values stored in the "
"profile.\n"
"\n"
"Click to open the profile manager."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:160
msgctxt "@label:header"
msgid "Custom profiles"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
msgctxt ""
"@label %1 is filled in with the type of a profile. %2 is filled with a list "
"of numbers (eg '1' or '1, 2')"
msgid ""
"There is no %1 profile for the configuration in extruder %2. The default "
"intent will be used instead"
msgid_plural ""
"There is no %1 profile for the configurations in extruders %2. The default "
"intent will be used instead"
msgstr[0] ""
msgstr[1] ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
msgctxt "@label shown when we load a Gcode file"
msgid "Print setup disabled. G-code file can not be modified."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
msgctxt "@button"
msgid "Recommended"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
msgctxt "@button"
msgid "Custom"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
msgctxt "@label:Should be short"
msgid "On"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
msgctxt "@label:Should be short"
msgid "Off"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
msgctxt "@label"
msgid "Experimental"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
msgctxt "@label"
msgid "Adhesion"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
msgctxt "@label"
msgid ""
"Enable printing a brim or raft. This will add a flat area around or under "
"your object which is easy to cut off afterwards."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
msgctxt "@label"
msgid "Gradual infill"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
msgctxt "@label"
msgid ""
"Gradual infill will gradually increase the amount of infill towards the top."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
msgctxt "@tooltip"
msgid ""
"You have modified some profile settings. If you want to change these go to "
"custom mode."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
msgctxt "@label"
msgid "Support"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
msgctxt "@label"
msgid ""
"Generate structures to support parts of the model which have overhangs. "
"Without these structures, such parts would collapse during printing."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:234
msgctxt "@label"
msgid ""
"Some hidden settings use values different from their normal calculated "
"value.\n"
"\n"
"Click to make these settings visible."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
msgctxt "@label"
msgid ""
"This setting is not used because all the settings that it influences are "
"overridden."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
msgctxt "@label Header for list of settings."
msgid "Affects"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
msgctxt "@label Header for list of settings."
msgid "Affected By"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
msgctxt "@label"
msgid ""
"This setting is always shared between all extruders. Changing it here will "
"change the value for all extruders."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
msgctxt "@label"
msgid "This setting is resolved from conflicting extruder-specific values:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
msgctxt "@label"
msgid ""
"This setting has a value that is different from the profile.\n"
"\n"
"Click to restore the value of the profile."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
msgctxt "@label"
msgid ""
"This setting is normally calculated, but it currently has an absolute value "
"set.\n"
"\n"
"Click to restore the calculated value."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
msgctxt "@label:textbox"
msgid "Search settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:463
msgctxt "@action:menu"
msgid "Copy value to all extruders"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:472
msgctxt "@action:menu"
msgid "Copy all changed values to all extruders"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:509
msgctxt "@action:menu"
msgid "Hide this setting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:522
msgctxt "@action:menu"
msgid "Don't show this setting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:526
msgctxt "@action:menu"
msgid "Keep this setting visible"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
msgctxt "@info:tooltip"
msgid "3D View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
msgctxt "@info:tooltip"
msgid "Front View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
msgctxt "@info:tooltip"
msgid "Top View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
msgctxt "@info:tooltip"
msgid "Left View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
msgctxt "@info:tooltip"
msgid "Right View"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
msgctxt "@label"
msgid "View type"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:212
msgctxt "@label"
msgid "Printer name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:225
msgctxt "@text"
msgid "Please give your printer a name"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
msgctxt "@label"
msgid "Add a printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
msgctxt "@label"
msgid "Add a networked printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:81
msgctxt "@label"
msgid "Add a non-networked printer"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:42
msgctxt "@label"
msgid "There is no printer found over your network."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:180
msgctxt "@label"
msgid "Refresh"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:191
msgctxt "@label"
msgid "Add printer by IP"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:224
msgctxt "@label"
msgid "Troubleshooting"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
msgctxt "@label"
msgid "Add printer by IP address"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
msgctxt "@text"
msgid "Place enter your printer's IP address."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
msgctxt "@button"
msgid "Add"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
msgctxt "@label"
msgid "Could not connect to device."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
msgctxt "@label"
msgid "Can't connect to your Ultimaker printer?"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
msgctxt "@label"
msgid "The printer at this address has not responded yet."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
msgctxt "@label"
msgid ""
"This printer cannot be added because it's an unknown printer or it's not the "
"host of a group."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
msgctxt "@button"
msgid "Back"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
msgctxt "@button"
msgid "Connect"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:36
msgctxt "@label"
msgid "Ultimaker Account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:77
msgctxt "@text"
msgid "Your key to connected 3D printing"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:94
msgctxt "@text"
msgid "- Customize your experience with more print profiles and plugins"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:97
msgctxt "@text"
msgid "- Stay flexible by syncing your setup and loading it anywhere"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:100
msgctxt "@text"
msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:119
msgctxt "@button"
msgid "Finish"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:128
msgctxt "@button"
msgid "Create an account"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
msgctxt "@label"
msgid "Help us to improve Ultimaker Cura"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
msgctxt "@text"
msgid ""
"Ultimaker Cura collects anonymous data to improve print quality and user "
"experience, including:"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
msgctxt "@text"
msgid "Machine types"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
msgctxt "@text"
msgid "Material usage"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
msgctxt "@text"
msgid "Number of slices"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
msgctxt "@text"
msgid "Print settings"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
msgctxt "@text"
msgid ""
"Data collected by Ultimaker Cura will not contain any personal information."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
msgctxt "@text"
msgid "More information"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
msgctxt "@label"
msgid "Empty"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
msgctxt "@label"
msgid "User Agreement"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
msgctxt "@button"
msgid "Decline and close"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
msgctxt "@label"
msgid "Welcome to Ultimaker Cura"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
msgctxt "@text"
msgid ""
"Please follow these steps to set up\n"
"Ultimaker Cura. This will only take a few moments."
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
msgctxt "@button"
msgid "Get started"
msgstr ""

#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
msgctxt "@label"
msgid "What's new in Ultimaker Cura"
msgstr ""

#: ModelChecker/plugin.json
msgctxt "description"
msgid ""
"Checks models and print configuration for possible printing issues and give "
"suggestions."
msgstr ""

#: ModelChecker/plugin.json
msgctxt "name"
msgid "Model Checker"
msgstr ""

#: 3MFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading 3MF files."
msgstr ""

#: 3MFReader/plugin.json
msgctxt "name"
msgid "3MF Reader"
msgstr ""

#: 3MFWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing 3MF files."
msgstr ""

#: 3MFWriter/plugin.json
msgctxt "name"
msgid "3MF Writer"
msgstr ""

#: AMFReader/plugin.json
msgctxt "description"
msgid "Provides support for reading AMF files."
msgstr ""

#: AMFReader/plugin.json
msgctxt "name"
msgid "AMF Reader"
msgstr ""

#: CuraDrive/plugin.json
msgctxt "description"
msgid "Backup and restore your configuration."
msgstr ""

#: CuraDrive/plugin.json
msgctxt "name"
msgid "Cura Backups"
msgstr ""

#: CuraEngineBackend/plugin.json
msgctxt "description"
msgid "Provides the link to the CuraEngine slicing backend."
msgstr ""

#: CuraEngineBackend/plugin.json
msgctxt "name"
msgid "CuraEngine Backend"
msgstr ""

#: CuraProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing Cura profiles."
msgstr ""

#: CuraProfileReader/plugin.json
msgctxt "name"
msgid "Cura Profile Reader"
msgstr ""

#: CuraProfileWriter/plugin.json
msgctxt "description"
msgid "Provides support for exporting Cura profiles."
msgstr ""

#: CuraProfileWriter/plugin.json
msgctxt "name"
msgid "Cura Profile Writer"
msgstr ""

#: FirmwareUpdateChecker/plugin.json
msgctxt "description"
msgid "Checks for firmware updates."
msgstr ""

#: FirmwareUpdateChecker/plugin.json
msgctxt "name"
msgid "Firmware Update Checker"
msgstr ""

#: FirmwareUpdater/plugin.json
msgctxt "description"
msgid "Provides a machine actions for updating firmware."
msgstr ""

#: FirmwareUpdater/plugin.json
msgctxt "name"
msgid "Firmware Updater"
msgstr ""

#: GCodeGzReader/plugin.json
msgctxt "description"
msgid "Reads g-code from a compressed archive."
msgstr ""

#: GCodeGzReader/plugin.json
msgctxt "name"
msgid "Compressed G-code Reader"
msgstr ""

#: GCodeGzWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a compressed archive."
msgstr ""

#: GCodeGzWriter/plugin.json
msgctxt "name"
msgid "Compressed G-code Writer"
msgstr ""

#: GCodeProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from g-code files."
msgstr ""

#: GCodeProfileReader/plugin.json
msgctxt "name"
msgid "G-code Profile Reader"
msgstr ""

#: GCodeReader/plugin.json
msgctxt "description"
msgid "Allows loading and displaying G-code files."
msgstr ""

#: GCodeReader/plugin.json
msgctxt "name"
msgid "G-code Reader"
msgstr ""

#: GCodeWriter/plugin.json
msgctxt "description"
msgid "Writes g-code to a file."
msgstr ""

#: GCodeWriter/plugin.json
msgctxt "name"
msgid "G-code Writer"
msgstr ""

#: ImageReader/plugin.json
msgctxt "description"
msgid "Enables ability to generate printable geometry from 2D image files."
msgstr ""

#: ImageReader/plugin.json
msgctxt "name"
msgid "Image Reader"
msgstr ""

#: LegacyProfileReader/plugin.json
msgctxt "description"
msgid "Provides support for importing profiles from legacy Cura versions."
msgstr ""

#: LegacyProfileReader/plugin.json
msgctxt "name"
msgid "Legacy Cura Profile Reader"
msgstr ""

#: MachineSettingsAction/plugin.json
msgctxt "description"
msgid ""
"Provides a way to change machine settings (such as build volume, nozzle "
"size, etc.)."
msgstr ""

#: MachineSettingsAction/plugin.json
msgctxt "name"
msgid "Machine Settings Action"
msgstr ""

#: MonitorStage/plugin.json
msgctxt "description"
msgid "Provides a monitor stage in Cura."
msgstr ""

#: MonitorStage/plugin.json
msgctxt "name"
msgid "Monitor Stage"
msgstr ""

#: PerObjectSettingsTool/plugin.json
msgctxt "description"
msgid "Provides the Per Model Settings."
msgstr ""

#: PerObjectSettingsTool/plugin.json
msgctxt "name"
msgid "Per Model Settings Tool"
msgstr ""

#: PostProcessingPlugin/plugin.json
msgctxt "description"
msgid "Extension that allows for user created scripts for post processing"
msgstr ""

#: PostProcessingPlugin/plugin.json
msgctxt "name"
msgid "Post Processing"
msgstr ""

#: PrepareStage/plugin.json
msgctxt "description"
msgid "Provides a prepare stage in Cura."
msgstr ""

#: PrepareStage/plugin.json
msgctxt "name"
msgid "Prepare Stage"
msgstr ""

#: PreviewStage/plugin.json
msgctxt "description"
msgid "Provides a preview stage in Cura."
msgstr ""

#: PreviewStage/plugin.json
msgctxt "name"
msgid "Preview Stage"
msgstr ""

#: RemovableDriveOutputDevice/plugin.json
msgctxt "description"
msgid "Provides removable drive hotplugging and writing support."
msgstr ""

#: RemovableDriveOutputDevice/plugin.json
msgctxt "name"
msgid "Removable Drive Output Device Plugin"
msgstr ""

#: SentryLogger/plugin.json
msgctxt "description"
msgid "Logs certain events so that they can be used by the crash reporter"
msgstr ""

#: SentryLogger/plugin.json
msgctxt "name"
msgid "Sentry Logger"
msgstr ""

#: SimulationView/plugin.json
msgctxt "description"
msgid "Provides the Simulation view."
msgstr ""

#: SimulationView/plugin.json
msgctxt "name"
msgid "Simulation View"
msgstr ""

#: SliceInfoPlugin/plugin.json
msgctxt "description"
msgid "Submits anonymous slice info. Can be disabled through preferences."
msgstr ""

#: SliceInfoPlugin/plugin.json
msgctxt "name"
msgid "Slice info"
msgstr ""

#: SolidView/plugin.json
msgctxt "description"
msgid "Provides a normal solid mesh view."
msgstr ""

#: SolidView/plugin.json
msgctxt "name"
msgid "Solid View"
msgstr ""

#: SupportEraser/plugin.json
msgctxt "description"
msgid ""
"Creates an eraser mesh to block the printing of support in certain places"
msgstr ""

#: SupportEraser/plugin.json
msgctxt "name"
msgid "Support Eraser"
msgstr ""

#: Toolbox/plugin.json
msgctxt "description"
msgid "Find, manage and install new Cura packages."
msgstr ""

#: Toolbox/plugin.json
msgctxt "name"
msgid "Toolbox"
msgstr ""

#: TrimeshReader/plugin.json
msgctxt "description"
msgid "Provides support for reading model files."
msgstr ""

#: TrimeshReader/plugin.json
msgctxt "name"
msgid "Trimesh Reader"
msgstr ""

#: UFPReader/plugin.json
msgctxt "description"
msgid "Provides support for reading Ultimaker Format Packages."
msgstr ""

#: UFPReader/plugin.json
msgctxt "name"
msgid "UFP Reader"
msgstr ""

#: UFPWriter/plugin.json
msgctxt "description"
msgid "Provides support for writing Ultimaker Format Packages."
msgstr ""

#: UFPWriter/plugin.json
msgctxt "name"
msgid "UFP Writer"
msgstr ""

#: UltimakerMachineActions/plugin.json
msgctxt "description"
msgid ""
"Provides machine actions for Ultimaker machines (such as bed leveling "
"wizard, selecting upgrades, etc.)."
msgstr ""

#: UltimakerMachineActions/plugin.json
msgctxt "name"
msgid "Ultimaker machine actions"
msgstr ""

#: UM3NetworkPrinting/plugin.json
msgctxt "description"
msgid "Manages network connections to Ultimaker networked printers."
msgstr ""

#: UM3NetworkPrinting/plugin.json
msgctxt "name"
msgid "Ultimaker Network Connection"
msgstr ""

#: USBPrinting/plugin.json
msgctxt "description"
msgid ""
"Accepts G-Code and sends them to a printer. Plugin can also update firmware."
msgstr ""

#: USBPrinting/plugin.json
msgctxt "name"
msgid "USB printing"
msgstr ""

#: VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
msgstr ""

#: VersionUpgrade/VersionUpgrade21to22/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.1 to 2.2"
msgstr ""

#: VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
msgstr ""

#: VersionUpgrade/VersionUpgrade22to24/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.2 to 2.4"
msgstr ""

#: VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
msgstr ""

#: VersionUpgrade/VersionUpgrade25to26/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.5 to 2.6"
msgstr ""

#: VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
msgstr ""

#: VersionUpgrade/VersionUpgrade26to27/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.6 to 2.7"
msgstr ""

#: VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
msgstr ""

#: VersionUpgrade/VersionUpgrade27to30/plugin.json
msgctxt "name"
msgid "Version Upgrade 2.7 to 3.0"
msgstr ""

#: VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
msgstr ""

#: VersionUpgrade/VersionUpgrade30to31/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.0 to 3.1"
msgstr ""

#: VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
msgstr ""

#: VersionUpgrade/VersionUpgrade32to33/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.2 to 3.3"
msgstr ""

#: VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
msgstr ""

#: VersionUpgrade/VersionUpgrade33to34/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.3 to 3.4"
msgstr ""

#: VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
msgstr ""

#: VersionUpgrade/VersionUpgrade34to35/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.4 to 3.5"
msgstr ""

#: VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
msgstr ""

#: VersionUpgrade/VersionUpgrade35to40/plugin.json
msgctxt "name"
msgid "Version Upgrade 3.5 to 4.0"
msgstr ""

#: VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
msgstr ""

#: VersionUpgrade/VersionUpgrade40to41/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.0 to 4.1"
msgstr ""

#: VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
msgstr ""

#: VersionUpgrade/VersionUpgrade41to42/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.1 to 4.2"
msgstr ""

#: VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
msgstr ""

#: VersionUpgrade/VersionUpgrade42to43/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.2 to 4.3"
msgstr ""

#: VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
msgstr ""

#: VersionUpgrade/VersionUpgrade43to44/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.3 to 4.4"
msgstr ""

#: VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
msgstr ""

#: VersionUpgrade/VersionUpgrade44to45/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.4 to 4.5"
msgstr ""

#: VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "description"
msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
msgstr ""

#: VersionUpgrade/VersionUpgrade45to46/plugin.json
msgctxt "name"
msgid "Version Upgrade 4.5 to 4.6"
msgstr ""

#: X3DReader/plugin.json
msgctxt "description"
msgid "Provides support for reading X3D files."
msgstr ""

#: X3DReader/plugin.json
msgctxt "name"
msgid "X3D Reader"
msgstr ""

#: XmlMaterialProfile/plugin.json
msgctxt "description"
msgid "Provides capabilities to read and write XML-based material profiles."
msgstr ""

#: XmlMaterialProfile/plugin.json
msgctxt "name"
msgid "Material Profiles"
msgstr ""

#: XRayView/plugin.json
msgctxt "description"
msgid "Provides the X-Ray view."
msgstr ""

#: XRayView/plugin.json
msgctxt "name"
msgid "X-Ray View"
msgstr ""