# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2020-10-19 13:15+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 msgctxt "@label" msgid "Unknown" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 msgctxt "@label" msgid "" "The printer(s) below cannot be connected because they are part of a group" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 msgctxt "@label" msgid "Available networked printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211 msgctxt "@menuitem" msgid "Not overridden" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76 #, python-brace-format msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 msgctxt "@label" msgid "Default" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "" "The visual profile is designed to print visual prototypes and models with " "the intent of high visual and surface quality." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "" "The engineering profile is designed to print functional prototypes and end-" "use parts with the intent of better accuracy and for closer tolerances." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "" "The draft profile is designed to print initial prototypes and concept " "validation with the intent of significant print time reduction." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226 msgctxt "@label" msgid "Custom Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205 msgctxt "@label" msgid "Custom" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383 msgctxt "@label" msgid "Custom profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178 msgctxt "@info:title" msgid "Login failed" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" msgid "Finding Location" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" msgid "Can't Find Location" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104 msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113 msgctxt "@info:title" msgid "Backup" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup without having proper data or meta data." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup that is higher than the current version." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98 msgctxt "@info:status" msgid "" "The build volume height has been reduced due to the value of the \"Print " "Sequence\" setting to prevent the gantry from colliding with printed models." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100 msgctxt "@info:title" msgid "Build Volume" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "

Oops, Ultimaker Cura has encountered something that doesn't seem right." "

\n" "

We encountered an unrecoverable error during start " "up. It was possibly caused by some incorrect configuration files. We suggest " "to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.\n" "

Please send us this Crash Report to fix the problem.\n" " " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to Ultimaker" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "

A fatal error has occurred in Cura. Please send us this Crash Report " "to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report " "automatically to our servers

\n" " " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized
" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "
  • OpenGL Version: {version}
    • " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "
  • OpenGL Vendor: {vendor}
    • " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "
  • OpenGL Renderer: {renderer}
    • " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389 msgctxt "@title:groupbox" msgid "Logs" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417 msgctxt "@action:button" msgid "Send report" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521 msgctxt "@info:progress" msgid "Loading machines..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528 msgctxt "@info:progress" msgid "Setting up preferences..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657 msgctxt "@info:progress" msgid "Initializing Active Machine..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788 msgctxt "@info:progress" msgid "Initializing machine manager..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802 msgctxt "@info:progress" msgid "Initializing build volume..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870 msgctxt "@info:progress" msgid "Setting up scene..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906 msgctxt "@info:progress" msgid "Loading interface..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911 msgctxt "@info:progress" msgid "Initializing engine..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221 #, python-format msgctxt "" "@info 'width', 'depth' and 'height' are variable names that must NOT be " "translated; just translate the format of ##x##x## mm." msgid "%(width).1f x %(depth).1f x %(height).1f mm" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777 #, python-brace-format msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 msgctxt "@info:title" msgid "Warning" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787 #, python-brace-format msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 msgctxt "@info:title" msgid "Error" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26 msgctxt "@info:status" msgid "Multiplying and placing objects" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28 msgctxt "@info:title" msgid "Placing Objects" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77 msgctxt "@info:title" msgid "Placing Object" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90 msgctxt "@message" msgid "Could not read response." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74 msgctxt "@message" msgid "The provided state is not correct." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187 msgctxt "@info" msgid "" "Unable to start a new sign in process. Check if another sign in attempt is " "still active." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 msgctxt "@info" msgid "Unable to reach the Ultimaker account server." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132 msgctxt "@title:window" msgid "File Already Exists" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "" "The file {0} already exists. Are you sure you want to " "overwrite it?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "" "Failed to export profile to {0}: {1}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "" "Failed to export profile to {0}: Writer plugin reported " "failure." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157 msgctxt "@info:title" msgid "Export succeeded" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}: {1}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "" "Can't import profile from {0} before a printer is added." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "No custom profile to import in file {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "" "This profile {0} contains incorrect data, could not " "import it." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to import profile from {0}:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423 msgctxt "@label" msgid "Custom profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443 msgctxt "@info:status" msgid "Global stack is missing." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463 #, python-brace-format msgctxt "@info:status" msgid "" "Quality type '{0}' is not compatible with the current active machine " "definition '{1}'." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468 #, python-brace-format msgctxt "@info:status" msgid "" "Warning: The profile is not visible because its quality type '{0}' is not " "available for the current configuration. Switch to a material/nozzle " "combination that can use this quality type." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 msgctxt "@label" msgid "Nozzle" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860 msgctxt "@info:message Followed by a list of settings." msgid "" "Settings have been changed to match the current availability of extruders:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862 msgctxt "@info:title" msgid "Settings updated" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447 msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48 msgctxt "@action:button" msgid "Add" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263 msgctxt "@action:button" msgid "Finish" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292 msgctxt "@action:button" msgid "Cancel" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83 msgctxt "@tooltip" msgid "Outer Wall" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84 msgctxt "@tooltip" msgid "Inner Walls" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85 msgctxt "@tooltip" msgid "Skin" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86 msgctxt "@tooltip" msgid "Infill" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Support Infill" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Support Interface" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Support" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Skirt" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Prime Tower" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Travel" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Retractions" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94 msgctxt "@tooltip" msgid "Other" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 msgctxt "@action:button" msgid "Next" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127 msgctxt "@action:button" msgid "Close" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96 #, python-brace-format msgctxt "@info:status" msgid "" "

    One or more 3D models may not print optimally due to the model size and " "material configuration:

    \n" "

    {model_names}

    \n" "

    Find out how to ensure the best possible print quality and reliability.\n" "

    View print quality " "guide

    " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "" "Project file {0} contains an unknown machine type " "{1}. Cannot import the machine. Models will be imported " "instead." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538 msgctxt "@info:title" msgid "Open Project File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "" "Project file {0} is suddenly inaccessible: {1}" "." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686 #, python-brace-format msgctxt "@info:error Don't translate the XML tag !" msgid "" "Project file {0} is made using profiles that are " "unknown to this version of Ultimaker Cura." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203 msgctxt "@title:tab" msgid "Recommended" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205 msgctxt "@title:tab" msgid "Custom" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96 msgctxt "@error:zip" msgid "" "The operating system does not allow saving a project file to this location " "or with this file name." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185 msgctxt "@error:zip" msgid "Error writing 3mf file." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" msgid "AMF File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 msgctxt "@info:title" msgid "Backups" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27 msgctxt "@info:backup_status" msgid "There was an error while uploading your backup." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47 msgctxt "@info:backup_status" msgid "Creating your backup..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54 msgctxt "@info:backup_status" msgid "There was an error while creating your backup." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58 msgctxt "@info:backup_status" msgid "Uploading your backup..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68 msgctxt "@info:backup_status" msgid "Your backup has finished uploading." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107 msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64 msgctxt "@item:inmenu" msgid "Manage backups" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 msgctxt "@info:status" msgid "" "Unable to slice with the current material as it is incompatible with the " "selected machine or configuration." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441 msgctxt "@info:title" msgid "Unable to slice" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386 #, python-brace-format msgctxt "@info:status" msgid "" "Unable to slice with the current settings. The following settings have " "errors: {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410 #, python-brace-format msgctxt "@info:status" msgid "" "Unable to slice due to some per-model settings. The following settings have " "errors on one or more models: {error_labels}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419 msgctxt "@info:status" msgid "" "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 #, python-format msgctxt "@info:status" msgid "" "Unable to slice because there are objects associated with disabled Extruder " "%s." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" "- Fit within the build volume\n" "- Are assigned to an enabled extruder\n" "- Are not all set as modifier meshes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:title" msgid "Information" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 msgctxt "@info" msgid "Could not access update information." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 #, python-brace-format msgctxt "" "@info Don't translate {machine_name}, since it gets replaced by a printer " "name!" msgid "" "New features or bug-fixes may be available for your {machine_name}! If not " "already at the latest version, it is recommended to update the firmware on " "your printer to version {latest_version}." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" msgid "How to update" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 msgctxt "@action" msgid "Update Firmware" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347 msgctxt "@info:status" msgid "Parsing G-code" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503 msgctxt "@info:title" msgid "G-code Details" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501 msgctxt "@info:generic" msgid "" "Make sure the g-code is suitable for your printer and printer configuration " "before sending the file to it. The g-code representation may not be accurate." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "G File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74 msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 msgctxt "@action" msgid "Machine Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" msgid "Monitor" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" msgid "Per Model Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15 msgctxt "@info:tooltip" msgid "Configure Per Model Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 msgctxt "@item:inmenu" msgid "Post Processing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 msgctxt "@item:inmenu" msgid "Modify G-Code" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" msgid "Preview" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 msgctxt "@info:title" msgid "Saving" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 msgctxt "@info:title" msgid "File Saved" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 msgctxt "@action:button" msgid "Eject" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121 msgctxt "@info:status" msgid "Cura does not accurately display layers when Wire Printing is enabled." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122 msgctxt "@info:title" msgid "Simulation View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123 msgctxt "@info:status" msgid "Nothing is shown because you need to slice first." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123 msgctxt "@info:title" msgid "No layers to show" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15 msgctxt "@item:inlistbox" msgid "Layer view" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70 msgctxt "@info:status" msgid "" "Your model is not manifold. The highlighted areas indicate either missing or " "extraneous surfaces." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72 msgctxt "@info:title" msgid "Model errors" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12 msgctxt "@label" msgid "Support Blocker" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" msgid "Create a volume in which supports are not printed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142 msgctxt "@info:generic" msgid "Do you want to sync material and software packages with your account?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 msgctxt "@info:title" msgid "Changes detected from your Ultimaker account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146 msgctxt "@action:button" msgid "Sync" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89 msgctxt "@info:generic" msgid "Syncing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9 msgctxt "@button" msgid "Decline" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 msgctxt "@button" msgid "Agree" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74 msgctxt "@title:window" msgid "Plugin License Agreement" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38 msgctxt "@button" msgid "Decline and remove from account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20 msgctxt "@info:generic" msgid "You need to quit and restart {} before changes have effect." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76 msgctxt "@info:generic" msgid "{} plugins failed to download" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15 msgctxt "@item:inlistbox 'Open' is part of the name of this file format." msgid "Open Compressed Triangle Mesh" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" msgid "COLLADA Digital Asset Exchange" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" msgid "glTF Binary" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27 msgctxt "@item:inlistbox" msgid "glTF Embedded JSON" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36 msgctxt "@item:inlistbox" msgid "Stanford Triangle Format" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40 msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "Ultimaker Format Package" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146 msgctxt "@info:error" msgid "Can't write to UFP file:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 msgctxt "@action" msgid "Level build plate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" msgid "Select upgrades" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152 msgctxt "@action:button" msgid "Print via cloud" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153 msgctxt "@properties:tooltip" msgid "Print via cloud" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 msgctxt "@info:status" msgid "Connected via cloud" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264 #, python-brace-format msgctxt "@error:send" msgid "Unknown error code when uploading print job: {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" msgid_plural "... and {0} others" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 msgctxt "@action:button" msgid "Remove printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460 msgctxt "@title:window" msgid "Remove printers?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463 #, python-brace-format msgctxt "@label" msgid "" "You are about to remove {0} printer from Cura. This action cannot be " "undone.\n" "Are you sure you want to continue?" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be " "undone.\n" "Are you sure you want to continue?" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be " "undone.\n" "Are you sure you want to continue?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27 msgctxt "@info:status" msgid "Send and monitor print jobs from anywhere using your Ultimaker account." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33 msgctxt "@info:status Ultimaker Cloud should not be translated." msgid "Connect to Ultimaker Digital Factory" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36 msgctxt "@action" msgid "Get started" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 msgctxt "@info:status" msgid "" "You are attempting to connect to a printer that is not running Ultimaker " "Connect. Please update the printer to the latest firmware." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" msgid "Update your printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format msgctxt "@info:status" msgid "" "Cura has detected material profiles that were not yet installed on the host " "printer of group {0}." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 msgctxt "@info:title" msgid "Sending materials to printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "" "You are attempting to connect to {0} but it is not the host of a group. You " "can visit the web page to configure it as a group host." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35 msgctxt "@action" msgid "Configure group" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" msgid "Sending Print Job" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" msgid "Uploading print job to printer." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 msgctxt "@info:status" msgid "Connected over the network" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 msgctxt "@action" msgid "Connect via Network" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" msgid "tomorrow" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 msgctxt "@info:status" msgid "today" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 msgctxt "@item:inmenu" msgid "USB printing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print via USB" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 msgctxt "@info:tooltip" msgid "Print via USB" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 msgctxt "@info:status" msgid "Connected via USB" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 msgctxt "@label" msgid "" "A USB print is in progress, closing Cura will stop this print. Are you sure?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 msgctxt "@message" msgid "" "A print is still in progress. Cura cannot start another print via USB until " "the previous print has completed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 msgctxt "@message" msgid "Print in Progress" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" msgid "X3D File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22 msgctxt "@info:tooltip" msgid "" "Some things could be problematic in this print. Click to see tips for " "adjustment." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14 msgctxt "@title:window" msgid "Open Project" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61 msgctxt "@action:ComboBox Update/override existing profile" msgid "Update existing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62 msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93 msgctxt "@action:label" msgid "Printer settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112 msgctxt "@info:tooltip" msgid "How should the conflict in the machine be resolved?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102 msgctxt "@action:label" msgid "Type" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 msgctxt "@action:label" msgid "Printer Group" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218 msgctxt "@action:label" msgid "Profile settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219 msgctxt "@info:tooltip" msgid "How should the conflict in the profile be resolved?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242 msgctxt "@action:label" msgid "Name" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259 msgctxt "@action:label" msgid "Intent" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226 msgctxt "@action:label" msgid "Not in profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287 msgctxt "@action:label" msgid "Derivative from" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292 msgctxt "@action:label" msgid "%1, %2 override" msgid_plural "%1, %2 overrides" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309 msgctxt "@action:label" msgid "Material settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325 msgctxt "@info:tooltip" msgid "How should the conflict in the material be resolved?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369 msgctxt "@action:label" msgid "Setting visibility" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378 msgctxt "@action:label" msgid "Mode" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394 msgctxt "@action:label" msgid "Visible settings:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399 msgctxt "@action:label" msgid "%1 out of %2" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425 msgctxt "@action:warning" msgid "Loading a project will clear all models on the build plate." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453 msgctxt "@action:button" msgid "Open" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" msgid "Want more?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" msgid "Backup Now" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 msgctxt "@checkbox:description" msgid "Auto Backup" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 msgctxt "@checkbox:description" msgid "Automatically create a backup each day that Cura is started." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71 msgctxt "@button" msgid "Restore" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99 msgctxt "@dialog:title" msgid "Delete Backup" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100 msgctxt "@dialog:info" msgid "Are you sure you want to delete this backup? This cannot be undone." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108 msgctxt "@dialog:title" msgid "Restore Backup" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109 msgctxt "@dialog:info" msgid "" "You will need to restart Cura before your backup is restored. Do you want to " "close Cura now?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 msgctxt "@backuplist:label" msgid "Cura Version" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 msgctxt "@backuplist:label" msgid "Machines" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 msgctxt "@backuplist:label" msgid "Materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 msgctxt "@backuplist:label" msgid "Profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 msgctxt "@backuplist:label" msgid "Plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25 msgctxt "@title:window" msgid "Cura Backups" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 msgctxt "@title" msgid "My Backups" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38 msgctxt "@empty_state" msgid "" "You don't have any backups currently. Use the 'Backup Now' button to create " "one." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60 msgctxt "@backup_limit_info" msgid "" "During the preview phase, you'll be limited to 5 visible backups. Remove a " "backup to see older ones." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125 msgctxt "@button" msgid "Sign in" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39 msgctxt "@label" msgid "" "Firmware is the piece of software running directly on your 3D printer. This " "firmware controls the step motors, regulates the temperature and ultimately " "makes your printer work." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46 msgctxt "@label" msgid "" "The firmware shipping with new printers works, but new versions tend to have " "more features and improvements." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83 msgctxt "@label" msgid "" "Firmware can not be updated because there is no connection with the printer." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91 msgctxt "@label" msgid "" "Firmware can not be updated because the connection with the printer does not " "support upgrading firmware." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98 msgctxt "@title:window" msgid "Select custom firmware" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119 msgctxt "@title:window" msgid "Firmware Update" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 msgctxt "@label" msgid "Updating firmware." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 msgctxt "@label" msgid "Firmware update completed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19 msgctxt "@title:window" msgid "Convert Image..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38 msgctxt "@action:label" msgid "Height (mm)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61 msgctxt "@action:label" msgid "Base (mm)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84 msgctxt "@action:label" msgid "Width (mm)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108 msgctxt "@action:label" msgid "Depth (mm)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126 msgctxt "@info:tooltip" msgid "" "For lithophanes dark pixels should correspond to thicker locations in order " "to block more light coming through. For height maps lighter pixels signify " "higher terrain, so lighter pixels should correspond to thicker locations in " "the generated 3D model." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149 msgctxt "@info:tooltip" msgid "" "For lithophanes a simple logarithmic model for translucency is available. " "For height maps the pixel values correspond to heights linearly." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 msgctxt "@item:inlistbox" msgid "Linear" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171 msgctxt "@info:tooltip" msgid "" "The percentage of light penetrating a print with a thickness of 1 " "millimeter. Lowering this value increases the contrast in dark regions and " "decreases the contrast in light regions of the image." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200 msgctxt "@action:label" msgid "Smoothing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 msgctxt "@action:button" msgid "OK" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 msgctxt "@title:tab" msgid "Printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 msgctxt "@title:label" msgid "Nozzle Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75 msgctxt "@label" msgid "Nozzle size" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 msgctxt "@label" msgid "mm" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89 msgctxt "@label" msgid "Compatible material diameter" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105 msgctxt "@label" msgid "Nozzle offset X" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120 msgctxt "@label" msgid "Nozzle offset Y" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135 msgctxt "@label" msgid "Cooling Fan Number" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162 msgctxt "@title:label" msgid "Extruder Start G-code" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176 msgctxt "@title:label" msgid "Extruder End G-code" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 msgctxt "@title:label" msgid "Printer Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70 msgctxt "@label" msgid "X (Width)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85 msgctxt "@label" msgid "Y (Depth)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100 msgctxt "@label" msgid "Z (Height)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114 msgctxt "@label" msgid "Build plate shape" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127 msgctxt "@label" msgid "Origin at center" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139 msgctxt "@label" msgid "Heated bed" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151 msgctxt "@label" msgid "Heated build volume" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163 msgctxt "@label" msgid "G-code flavor" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187 msgctxt "@title:label" msgid "Printhead Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 msgctxt "@label" msgid "X min" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 msgctxt "@label" msgid "Y min" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 msgctxt "@label" msgid "X max" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 msgctxt "@label" msgid "Y max" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 msgctxt "@label" msgid "Gantry Height" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293 msgctxt "@label" msgid "Number of Extruders" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374 msgctxt "@title:label" msgid "Start G-code" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385 msgctxt "@title:label" msgid "End G-code" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100 msgctxt "@info" msgid "" "Please make sure your printer has a connection:\n" "- Check if the printer is turned on.\n" "- Check if the printer is connected to the network.\n" "- Check if you are signed in to discover cloud-connected printers." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117 msgctxt "@info" msgid "Please connect your printer to the network." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155 msgctxt "@label link to technical assistance" msgid "View user manuals online" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42 msgctxt "@label" msgid "Mesh Type" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82 msgctxt "@label" msgid "Normal model" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94 msgctxt "@label" msgid "Print as support" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118 msgctxt "@label" msgid "Don't support overlaps" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380 msgctxt "@action:button" msgid "Select settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94 msgctxt "@label:textbox" msgid "Filter..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68 msgctxt "@label:checkbox" msgid "Show all" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233 msgctxt "@action" msgid "Add a script" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279 msgctxt "@label" msgid "Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 msgctxt "@label" msgid "Color scheme" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107 msgctxt "@label:listbox" msgid "Material Color" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111 msgctxt "@label:listbox" msgid "Line Type" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115 msgctxt "@label:listbox" msgid "Speed" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119 msgctxt "@label:listbox" msgid "Layer thickness" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156 msgctxt "@label" msgid "Compatibility Mode" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230 msgctxt "@label" msgid "Travels" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236 msgctxt "@label" msgid "Helpers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242 msgctxt "@label" msgid "Shell" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 msgctxt "@label" msgid "Infill" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298 msgctxt "@label" msgid "Only Show Top Layers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308 msgctxt "@label" msgid "Show 5 Detailed Layers On Top" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322 msgctxt "@label" msgid "Top / Bottom" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326 msgctxt "@label" msgid "Inner Wall" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384 msgctxt "@label" msgid "min" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433 msgctxt "@label" msgid "max" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17 msgctxt "@title:window" msgid "More information on anonymous data collection" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74 msgctxt "@text:window" msgid "" "Ultimaker Cura collects anonymous data in order to improve the print quality " "and user experience. Below is an example of all the data that is shared:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110 msgctxt "@text:window" msgid "I don't want to send anonymous data" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119 msgctxt "@text:window" msgid "Allow sending anonymous data" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25 msgctxt "@action:button" msgid "Back" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34 msgctxt "@label" msgid "Compatibility" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124 msgctxt "@label:table_header" msgid "Machine" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137 msgctxt "@label:table_header" msgid "Build Plate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143 msgctxt "@label:table_header" msgid "Support" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149 msgctxt "@label:table_header" msgid "Quality" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170 msgctxt "@action:label" msgid "Technical Data Sheet" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179 msgctxt "@action:label" msgid "Safety Data Sheet" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188 msgctxt "@action:label" msgid "Printing Guidelines" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197 msgctxt "@action:label" msgid "Website" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 msgctxt "@action:button" msgid "Installed" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56 msgctxt "@label:The string between and is the highlighted link" msgid "Log in is required to install or update" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80 msgctxt "@label:The string between and is the highlighted link" msgid "Buy material spools" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 msgctxt "@action:button" msgid "Update" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 msgctxt "@action:button" msgid "Updating" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 msgctxt "@action:button" msgid "Updated" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27 msgctxt "@label" msgid "Premium" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 msgctxt "@info:tooltip" msgid "Go to Web Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42 msgctxt "@label" msgid "Search materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19 msgctxt "@info" msgid "You will need to restart Cura before changes in packages have effect." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30 msgctxt "@title:tab" msgid "Plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 msgctxt "@title:tab" msgid "Materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58 msgctxt "@title:tab" msgid "Installed" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22 msgctxt "@label" msgid "Will install upon restarting" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53 msgctxt "@label:The string between and is the highlighted link" msgid "Log in is required to update" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 msgctxt "@action:button" msgid "Downgrade" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 msgctxt "@action:button" msgid "Uninstall" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18 msgctxt "@action:button" msgid "Install" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14 msgctxt "@title" msgid "Changes from your account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 msgctxt "@button" msgid "Dismiss" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 msgctxt "@button" msgid "Next" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52 msgctxt "@label" msgid "The following packages will be added:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97 msgctxt "@label" msgid "" "The following packages can not be installed because of an incompatible Cura " "version:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20 msgctxt "@title:window" msgid "Confirm uninstall" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50 msgctxt "@text:window" msgid "" "You are uninstalling materials and/or profiles that are still in use. " "Confirming will reset the following materials/profiles to their defaults." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51 msgctxt "@text:window" msgid "Materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52 msgctxt "@text:window" msgid "Profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90 msgctxt "@action:button" msgid "Confirm" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36 msgctxt "@label" msgid "You need to accept the license to install the package" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95 msgctxt "@label" msgid "Website" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102 msgctxt "@label" msgid "Email" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89 msgctxt "@label" msgid "Version" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96 msgctxt "@label" msgid "Last updated" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 msgctxt "@label" msgid "Brand" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110 msgctxt "@label" msgid "Downloads" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 msgctxt "@label" msgid "Community Contributions" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 msgctxt "@label" msgid "Community Plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42 msgctxt "@label" msgid "Generic Materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16 msgctxt "@info" msgid "" "Could not connect to the Cura Package database. Please check your connection." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33 msgctxt "@title:tab" msgid "Installed plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72 msgctxt "@info" msgid "No plugin has been installed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86 msgctxt "@title:tab" msgid "Installed materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125 msgctxt "@info" msgid "No material has been installed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139 msgctxt "@title:tab" msgid "Bundled plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184 msgctxt "@title:tab" msgid "Bundled materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17 msgctxt "@info" msgid "Fetching packages..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22 msgctxt "@description" msgid "" "Please sign in to get verified plugins and materials for Ultimaker Cura " "Enterprise" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19 msgctxt "@title" msgid "Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 msgctxt "@title" msgid "Build Plate Leveling" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44 msgctxt "@label" msgid "" "To make sure your prints will come out great, you can now adjust your " "buildplate. When you click 'Move to Next Position' the nozzle will move to " "the different positions that can be adjusted." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57 msgctxt "@label" msgid "" "For every position; insert a piece of paper under the nozzle and adjust the " "print build plate height. The print build plate height is right when the " "paper is slightly gripped by the tip of the nozzle." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75 msgctxt "@action:button" msgid "Start Build Plate Leveling" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87 msgctxt "@action:button" msgid "Move to Next Position" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" msgid "Please select any upgrades made to this Ultimaker Original" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41 msgctxt "@label" msgid "Heated Build Plate (official kit or self-built)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 msgctxt "@label" msgid "" "To print directly to your printer over the network, please make sure your " "printer is connected to the network using a network cable or by connecting " "your printer to your WIFI network. If you don't connect Cura with your " "printer, you can still use a USB drive to transfer g-code files to your " "printer." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77 msgctxt "@action:button" msgid "Edit" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138 msgctxt "@action:button" msgid "Remove" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96 msgctxt "@action:button" msgid "Refresh" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176 msgctxt "@label" msgid "" "If your printer is not listed, read the network printing " "troubleshooting guide" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 msgctxt "@label" msgid "Type" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 msgctxt "@label" msgid "Firmware version" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 msgctxt "@label" msgid "Address" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283 msgctxt "@action:button" msgid "Connect" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296 msgctxt "@title:window" msgid "Invalid IP address" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308 msgctxt "@title:window" msgid "Printer Address" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" msgid "Configuration Changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 msgctxt "@action:button" msgid "Override" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85 msgctxt "@label" msgid "The assigned printer, %1, requires the following configuration change:" msgid_plural "" "The assigned printer, %1, requires the following configuration changes:" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89 msgctxt "@label" msgid "" "The printer %1 is assigned, but the job contains an unknown material " "configuration." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99 msgctxt "@label" msgid "Change material %1 from %2 to %3." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102 msgctxt "@label" msgid "Load %3 as material %1 (This cannot be overridden)." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105 msgctxt "@label" msgid "Change print core %1 from %2 to %3." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108 msgctxt "@label" msgid "Change build plate to %1 (This cannot be overridden)." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115 msgctxt "@label" msgid "" "Override will use the specified settings with the existing printer " "configuration. This may result in a failed print." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 msgctxt "@label" msgid "Glass" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156 msgctxt "@label" msgid "Aluminum" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 msgctxt "@label" msgid "Move to top" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 msgctxt "@label" msgid "Delete" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289 msgctxt "@label" msgid "Resume" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 msgctxt "@label" msgid "Pausing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 msgctxt "@label" msgid "Resuming..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293 msgctxt "@label" msgid "Pause" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Aborting..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Abort" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144 msgctxt "@window:title" msgid "Move print job to top" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154 msgctxt "@window:title" msgid "Delete print job" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335 msgctxt "@window:title" msgid "Abort print" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" msgid "Loading..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352 msgctxt "@label:status" msgid "Unavailable" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Unreachable" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360 msgctxt "@label:status" msgid "Idle" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365 msgctxt "@label:status" msgid "Printing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406 msgctxt "@label" msgid "Untitled" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427 msgctxt "@label" msgid "Anonymous" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492 msgctxt "@action:button" msgid "Details" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133 msgctxt "@label" msgid "Unavailable printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135 msgctxt "@label" msgid "First available" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 msgctxt "@label:status" msgid "Aborted" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 msgctxt "@label:status" msgid "Finished" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 msgctxt "@label:status" msgid "Preparing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 msgctxt "@label:status" msgid "Aborting..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 msgctxt "@label:status" msgid "Pausing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 msgctxt "@label:status" msgid "Paused" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 msgctxt "@label:status" msgid "Resuming..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 msgctxt "@label:status" msgid "Action required" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 msgctxt "@label:status" msgid "Finishes %1 at %2" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31 msgctxt "@label" msgid "Queued" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66 msgctxt "@label link to connect manager" msgid "Manage in browser" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99 msgctxt "@label" msgid "There are no print jobs in the queue. Slice and send a job to add one." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110 msgctxt "@label" msgid "Print jobs" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122 msgctxt "@label" msgid "Total print time" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134 msgctxt "@label" msgid "Waiting for" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11 msgctxt "@title:window" msgid "Print over network" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52 msgctxt "@action:button" msgid "Print" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80 msgctxt "@label" msgid "Printer selection" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24 msgctxt "@action:button" msgid "Sign in" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40 msgctxt "@label" msgid "Your key to connected 3D printing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51 msgctxt "@text" msgid "" "- Customize your experience with more print profiles and plugins\n" "- Stay flexible by syncing your setup and loading it anywhere\n" "- Increase efficiency with a remote workflow on Ultimaker printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142 msgctxt "@button" msgid "Create account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28 msgctxt "@label" msgid "Checking..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35 msgctxt "@label" msgid "Account synced" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42 msgctxt "@label" msgid "Something went wrong..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96 msgctxt "@button" msgid "Install pending updates" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118 msgctxt "@button" msgid "Check for account updates" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81 msgctxt "@label The argument is a timestamp" msgid "Last update: %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109 msgctxt "@button" msgid "Ultimaker Account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125 msgctxt "@button" msgid "Sign Out" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" msgid "No time estimation available" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" msgid "No cost estimation available" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 msgctxt "@button" msgid "Preview" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" msgid "Time estimation" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114 msgctxt "@label" msgid "Material estimation" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164 msgctxt "@label m for meter" msgid "%1m" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165 msgctxt "@label g for grams" msgid "%1g" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55 msgctxt "@label:PrintjobStatus" msgid "Slicing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67 msgctxt "@label:PrintjobStatus" msgid "Unable to slice" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 msgctxt "@button" msgid "Processing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 msgctxt "@button" msgid "Slice" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104 msgctxt "@label" msgid "Start the slicing process" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118 msgctxt "@button" msgid "Cancel" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82 msgctxt "@action:inmenu" msgid "Show Online Troubleshooting Guide" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89 msgctxt "@action:inmenu" msgid "Toggle Full Screen" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97 msgctxt "@action:inmenu" msgid "Exit Full Screen" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104 msgctxt "@action:inmenu menubar:edit" msgid "&Undo" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114 msgctxt "@action:inmenu menubar:edit" msgid "&Redo" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124 msgctxt "@action:inmenu menubar:file" msgid "&Quit" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132 msgctxt "@action:inmenu menubar:view" msgid "3D View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" msgid "Front View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" msgid "Top View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" msgid "Left Side View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" msgid "Right Side View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167 msgctxt "@action:inmenu" msgid "Configure Cura..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174 msgctxt "@action:inmenu menubar:printer" msgid "&Add Printer..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180 msgctxt "@action:inmenu menubar:printer" msgid "Manage Pr&inters..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187 msgctxt "@action:inmenu" msgid "Manage Materials..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195 msgctxt "@action:inmenu" msgid "Add more materials from Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202 msgctxt "@action:inmenu menubar:profile" msgid "&Update profile with current settings/overrides" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210 msgctxt "@action:inmenu menubar:profile" msgid "&Discard current changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228 msgctxt "@action:inmenu menubar:profile" msgid "Manage Profiles..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236 msgctxt "@action:inmenu menubar:help" msgid "Show Online &Documentation" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244 msgctxt "@action:inmenu menubar:help" msgid "Report a &Bug" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252 msgctxt "@action:inmenu menubar:help" msgid "What's New" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258 msgctxt "@action:inmenu menubar:help" msgid "About..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265 msgctxt "@action:inmenu menubar:edit" msgid "Delete Selected Model" msgid_plural "Delete Selected Models" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275 msgctxt "@action:inmenu menubar:edit" msgid "Center Selected Model" msgid_plural "Center Selected Models" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284 msgctxt "@action:inmenu menubar:edit" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293 msgctxt "@action:inmenu" msgid "Delete Model" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301 msgctxt "@action:inmenu" msgid "Ce&nter Model on Platform" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307 msgctxt "@action:inmenu menubar:edit" msgid "&Group Models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327 msgctxt "@action:inmenu menubar:edit" msgid "Ungroup Models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337 msgctxt "@action:inmenu menubar:edit" msgid "&Merge Models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347 msgctxt "@action:inmenu" msgid "&Multiply Model..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354 msgctxt "@action:inmenu menubar:edit" msgid "Select All Models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364 msgctxt "@action:inmenu menubar:edit" msgid "Clear Build Plate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374 msgctxt "@action:inmenu menubar:file" msgid "Reload All Models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models To All Build Plates" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Positions" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Transformations" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419 msgctxt "@action:inmenu menubar:file" msgid "&Open File(s)..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427 msgctxt "@action:inmenu menubar:file" msgid "&New Project..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434 msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448 msgctxt "@action:menu" msgid "&Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15 msgctxt "@title:tab" msgid "General" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462 msgctxt "@title:tab" msgid "Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16 msgctxt "@title:tab" msgid "Printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34 msgctxt "@title:tab" msgid "Profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 msgctxt "@title:window" msgid "Open file(s)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744 msgctxt "@window:title" msgid "Install Package" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752 msgctxt "@title:window" msgid "Open File(s)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755 msgctxt "@text:window" msgid "" "We have found one or more G-Code files within the files you have selected. " "You can only open one G-Code file at a time. If you want to open a G-Code " "file, please just select only one." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858 msgctxt "@title:window" msgid "Add Printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866 msgctxt "@title:window" msgid "What's New" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57 msgctxt "@label" msgid "version: %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85 msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135 msgctxt "@label" msgid "Graphical user interface" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136 msgctxt "@label" msgid "Application framework" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137 msgctxt "@label" msgid "G-code generator" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138 msgctxt "@label" msgid "Interprocess communication library" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label" msgid "Programming language" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label" msgid "GUI framework" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label" msgid "GUI framework bindings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label" msgid "C/C++ Binding library" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144 msgctxt "@label" msgid "Data interchange format" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145 msgctxt "@label" msgid "Support library for scientific computing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146 msgctxt "@label" msgid "Support library for faster math" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147 msgctxt "@label" msgid "Support library for handling STL files" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label" msgid "Support library for handling planar objects" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label" msgid "Support library for handling triangular meshes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label" msgid "Support library for handling 3MF files" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label" msgid "Support library for file metadata and streaming" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152 msgctxt "@label" msgid "Serial communication library" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153 msgctxt "@label" msgid "ZeroConf discovery library" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154 msgctxt "@label" msgid "Polygon clipping library" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155 msgctxt "@Label" msgid "Static type checker for Python" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@Label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158 msgctxt "@Label" msgid "Python Error tracking library" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159 msgctxt "@label" msgid "Polygon packing library, developed by Prusa Research" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160 msgctxt "@label" msgid "Python bindings for libnest2d" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162 msgctxt "@label" msgid "Font" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label" msgid "SVG icons" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label" msgid "Linux cross-distribution application deployment" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20 msgctxt "@title:window" msgid "Open project file" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93 msgctxt "@text:window" msgid "" "This is a Cura project file. Would you like to open it as a project or " "import the models from it?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103 msgctxt "@text:window" msgid "Remember my choice" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122 msgctxt "@action:button" msgid "Open as project" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131 msgctxt "@action:button" msgid "Import models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15 msgctxt "@title:window" msgid "Discard or Keep changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57 msgctxt "@text:window, %1 is a profile name" msgid "" "You have customized some profile settings.\n" "Would you like to Keep these changed settings after switching profiles?\n" "Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111 msgctxt "@title:column" msgid "Profile settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125 msgctxt "@title:column" msgid "Current changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159 msgctxt "@option:discardOrKeep" msgid "Discard and never ask again" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 msgctxt "@option:discardOrKeep" msgid "Keep and never ask again" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197 msgctxt "@action:button" msgid "Discard changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210 msgctxt "@action:button" msgid "Keep changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 msgctxt "@text:window" msgid "" "We have found one or more project file(s) within the files you have " "selected. You can open only one project file at a time. We suggest to only " "import models from those files. Would you like to proceed?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99 msgctxt "@action:button" msgid "Import all as models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15 msgctxt "@title:window" msgid "Save Project" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173 msgctxt "@action:label" msgid "Extruder %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189 msgctxt "@action:label" msgid "%1 & material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191 msgctxt "@action:label" msgid "Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300 msgctxt "@action:button" msgid "Save" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16 msgctxt "@label %1 is filled in with the name of an extruder" msgid "Print Selected Model with %1" msgid_plural "Print Selected Models with %1" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99 msgctxt "@text Print job name" msgid "Untitled" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31 msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56 msgctxt "@title:menu menubar:toplevel" msgid "E&xtensions" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94 msgctxt "@title:menu menubar:toplevel" msgid "P&references" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102 msgctxt "@title:menu menubar:toplevel" msgid "&Help" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148 msgctxt "@title:window" msgid "New project" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149 msgctxt "@info:question" msgid "" "Are you sure you want to start a new project? This will clear the build " "plate and any unsaved settings." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90 msgctxt "@action:button" msgid "Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 msgctxt "@header" msgid "Configurations" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 msgctxt "@label" msgid "" "This configuration is not available because %1 is not recognized. Please " "visit %2 to download the correct material profile." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 msgctxt "@label" msgid "Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57 msgctxt "@label" msgid "Loading available configurations from the printer..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58 msgctxt "@label" msgid "" "The configurations are not available because the printer is disconnected." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112 msgctxt "@label" msgid "Select configuration" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223 msgctxt "@label" msgid "Configurations" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25 msgctxt "@header" msgid "Custom" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61 msgctxt "@label" msgid "Printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213 msgctxt "@label" msgid "Enabled" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267 msgctxt "@label" msgid "Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394 msgctxt "@label" msgid "Use glue for better adhesion with this material combination." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27 msgctxt "@label" msgid "Print Selected Model With:" msgid_plural "Print Selected Models With:" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116 msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141 msgctxt "@label" msgid "Number of Copies" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33 msgctxt "@title:menu menubar:file" msgid "&Save Project..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54 msgctxt "@title:menu menubar:file" msgid "&Export..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65 msgctxt "@action:inmenu menubar:file" msgid "Export Selection..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13 msgctxt "@label:category menu label" msgid "Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54 msgctxt "@label:category menu label" msgid "Favorites" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79 msgctxt "@label:category menu label" msgid "Generic" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25 msgctxt "@label:category menu label" msgid "Network enabled printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42 msgctxt "@label:category menu label" msgid "Local printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open &Recent" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15 msgctxt "@title:menu menubar:settings" msgid "&Printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29 msgctxt "@title:menu" msgid "&Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44 msgctxt "@action:inmenu" msgid "Set as Active Extruder" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50 msgctxt "@action:inmenu" msgid "Enable Extruder" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57 msgctxt "@action:inmenu" msgid "Disable Extruder" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13 msgctxt "@action:inmenu" msgid "Visible Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 msgctxt "@action:inmenu" msgid "Collapse All Categories" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 msgctxt "@action:inmenu" msgid "Manage Setting Visibility..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44 msgctxt "@action:inmenu menubar:view" msgid "Camera view" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47 msgctxt "@action:inmenu menubar:view" msgid "Perspective" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" msgid "Orthographic" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80 msgctxt "@action:inmenu menubar:view" msgid "&Build plate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119 msgctxt "@label:MonitorStatus" msgid "Not connected to a printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123 msgctxt "@label:MonitorStatus" msgid "Printer does not accept commands" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133 msgctxt "@label:MonitorStatus" msgid "In maintenance. Please check the printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144 msgctxt "@label:MonitorStatus" msgid "Lost connection with the printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146 msgctxt "@label:MonitorStatus" msgid "Printing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149 msgctxt "@label:MonitorStatus" msgid "Paused" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152 msgctxt "@label:MonitorStatus" msgid "Preparing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154 msgctxt "@label:MonitorStatus" msgid "Please remove the print" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325 msgctxt "@label" msgid "Abort Print" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337 msgctxt "@label" msgid "Are you sure you want to abort the print?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114 msgctxt "@label" msgid "Is printed as support." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117 msgctxt "@label" msgid "Other models overlapping with this model are modified." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120 msgctxt "@label" msgid "Infill overlapping with this model is modified." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123 msgctxt "@label" msgid "Overlaps with this model are not supported." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130 msgctxt "@label %1 is the number of settings it overrides." msgid "Overrides %1 setting." msgid_plural "Overrides %1 settings." msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59 msgctxt "@label" msgid "Object list" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137 msgctxt "@label" msgid "Interface" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216 msgctxt "@label" msgid "Currency:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229 msgctxt "@label" msgid "Theme:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285 msgctxt "@label" msgid "" "You will need to restart the application for these changes to have effect." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310 msgctxt "@option:check" msgid "Slice automatically" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324 msgctxt "@label" msgid "Viewport behavior" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332 msgctxt "@info:tooltip" msgid "" "Highlight unsupported areas of the model in red. Without support these areas " "will not print properly." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341 msgctxt "@option:check" msgid "Display overhang" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351 msgctxt "@info:tooltip" msgid "" "Highlight missing or extraneous surfaces of the model using warning signs. " "The toolpaths will often be missing parts of the intended geometry." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360 msgctxt "@option:check" msgid "Display model errors" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368 msgctxt "@info:tooltip" msgid "" "Moves the camera so the model is in the center of the view when a model is " "selected" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404 msgctxt "@info:tooltip" msgid "" "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435 msgctxt "@info:tooltip" msgid "" "Should models on the platform be moved so that they no longer intersect?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503 msgctxt "@option:check" msgid "Restore window position on start" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520 msgctxt "@window:text" msgid "Camera rendering:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531 msgid "Perspective" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532 msgid "Orthographic" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563 msgctxt "@label" msgid "Opening and saving files" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570 msgctxt "@info:tooltip" msgid "" "Should opening files from the desktop or external applications open in the " "same instance of Cura?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590 msgctxt "@option:check" msgid "Scale large models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600 msgctxt "@info:tooltip" msgid "" "An model may appear extremely small if its unit is for example in meters " "rather than millimeters. Should these models be scaled up?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620 msgctxt "@option:check" msgid "Select models when loaded" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630 msgctxt "@info:tooltip" msgid "" "Should a prefix based on the printer name be added to the print job name " "automatically?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683 msgctxt "@option:openProject" msgid "Always import models" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719 msgctxt "@info:tooltip" msgid "" "When you have made changes to a profile and switched to a different one, a " "dialog will be shown asking whether you want to keep your modifications or " "not, or you can choose a default behaviour and never show that dialog again." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 msgctxt "@label" msgid "Profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733 msgctxt "@window:text" msgid "" "Default behavior for changed setting values when switching to a different " "profile: " msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783 msgctxt "@label" msgid "Privacy" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795 msgctxt "@option:check" msgid "Check for updates on start" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805 msgctxt "@info:tooltip" msgid "" "Should anonymous data about your print be sent to Ultimaker? Note, no " "models, IP addresses or other personally identifiable information is sent or " "stored." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819 msgctxt "@action:button" msgid "More information" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84 msgctxt "@action:button" msgid "Activate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152 msgctxt "@action:button" msgid "Rename" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126 msgctxt "@action:button" msgid "Create" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141 msgctxt "@action:button" msgid "Duplicate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167 msgctxt "@action:button" msgid "Import" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179 msgctxt "@action:button" msgid "Export" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234 msgctxt "@action:label" msgid "Printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274 msgctxt "@title:window" msgid "Confirm Remove" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323 msgctxt "@title:window" msgid "Import Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tags or !" msgid "" "Could not import material %1: %2" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354 msgctxt "@title:window" msgid "Export Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358 msgctxt "@info:status Don't translate the XML tags and !" msgid "" "Failed to export material to %1: %2" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72 msgctxt "@title" msgid "Information" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101 msgctxt "@title:window" msgid "Confirm Diameter Change" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102 msgctxt "@label (%1 is a number)" msgid "" "The new filament diameter is set to %1 mm, which is not compatible with the " "current extruder. Do you wish to continue?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128 msgctxt "@label" msgid "Display Name" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148 msgctxt "@label" msgid "Material Type" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158 msgctxt "@label" msgid "Color" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208 msgctxt "@label" msgid "Properties" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210 msgctxt "@label" msgid "Density" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225 msgctxt "@label" msgid "Diameter" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259 msgctxt "@label" msgid "Filament Cost" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276 msgctxt "@label" msgid "Filament weight" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294 msgctxt "@label" msgid "Filament length" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303 msgctxt "@label" msgid "Cost per Meter" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317 msgctxt "@label" msgid "This material is linked to %1 and shares some of its properties." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324 msgctxt "@label" msgid "Unlink Material" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335 msgctxt "@label" msgid "Description" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348 msgctxt "@label" msgid "Adhesion Information" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 msgctxt "@label" msgid "Print settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104 msgctxt "@label" msgid "Create" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121 msgctxt "@label" msgid "Duplicate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202 msgctxt "@title:window" msgid "Create Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204 msgctxt "@info" msgid "Please provide a name for this profile." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260 msgctxt "@title:window" msgid "Duplicate Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291 msgctxt "@title:window" msgid "Rename Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304 msgctxt "@title:window" msgid "Import Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333 msgctxt "@title:window" msgid "Export Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396 msgctxt "@label %1 is printer name" msgid "Printer: %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554 msgctxt "@action:button" msgid "Update profile with current settings/overrides" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 msgctxt "@action:button" msgid "Discard current changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580 msgctxt "@action:label" msgid "" "This profile uses the defaults specified by the printer, so it has no " "settings/overrides in the list below." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588 msgctxt "@action:label" msgid "Your current settings match the selected profile." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606 msgctxt "@title:tab" msgid "Global Settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61 msgctxt "@info:status" msgid "Calculated" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75 msgctxt "@title:column" msgid "Setting" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82 msgctxt "@title:column" msgid "Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89 msgctxt "@title:column" msgid "Current" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97 msgctxt "@title:column" msgid "Unit" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14 msgctxt "@title:tab" msgid "Setting Visibility" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46 msgctxt "@label:textbox" msgid "Check all" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41 msgctxt "@label" msgid "Extruder" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71 msgctxt "@tooltip" msgid "" "The target temperature of the hotend. The hotend will heat up or cool down " "towards this temperature. If this is 0, the hotend heating is turned off." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 msgctxt "@button" msgid "Pre-heat" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370 msgctxt "@tooltip of pre-heat" msgid "" "Heat the hotend in advance before printing. You can continue adjusting your " "print while it is heating, and you won't have to wait for the hotend to heat " "up when you're ready to print." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26 msgctxt "@label" msgid "Build plate" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56 msgctxt "@tooltip" msgid "" "The target temperature of the heated bed. The bed will heat up or cool down " "towards this temperature. If this is 0, the bed heating is turned off." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361 msgctxt "@tooltip of pre-heat" msgid "" "Heat the bed in advance before printing. You can continue adjusting your " "print while it is heating, and you won't have to wait for the bed to heat up " "when you're ready to print." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52 msgctxt "@label" msgid "Printer control" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67 msgctxt "@label" msgid "Jog Position" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85 msgctxt "@label" msgid "X/Y" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192 msgctxt "@label" msgid "Z" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Jog Distance" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301 msgctxt "@label" msgid "Send G-code" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365 msgctxt "@tooltip of G-code command input" msgid "" "Send a custom G-code command to the connected printer. Press 'enter' to send " "the command." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 msgctxt "@info:status" msgid "The printer is not connected." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 msgctxt "@status" msgid "" "The cloud printer is offline. Please check if the printer is turned on and " "connected to the internet." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 msgctxt "@status" msgid "" "This printer is not linked to your account. Please visit the Ultimaker " "Digital Factory to establish a connection." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 msgctxt "@status" msgid "" "The cloud connection is currently unavailable. Please sign in to connect to " "the cloud printer." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 msgctxt "@status" msgid "" "The cloud connection is currently unavailable. Please check your internet " "connection." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238 msgctxt "@button" msgid "Add printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255 msgctxt "@button" msgid "Manage printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 msgctxt "@label" msgid "Connected printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 msgctxt "@label" msgid "Preset printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140 msgctxt "@label" msgid "Active print" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148 msgctxt "@label" msgid "Job Name" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156 msgctxt "@label" msgid "Printing Time" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164 msgctxt "@label" msgid "Estimated time left" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47 msgctxt "@label" msgid "Profile" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170 msgctxt "@tooltip" msgid "" "Some setting/override values are different from the values stored in the " "profile.\n" "\n" "Click to open the profile manager." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146 msgctxt "@label:header" msgid "Custom profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31 msgctxt "" "@label %1 is filled in with the type of a profile. %2 is filled with a list " "of numbers (eg '1' or '1, 2')" msgid "" "There is no %1 profile for the configuration in extruder %2. The default " "intent will be used instead" msgid_plural "" "There is no %1 profile for the configurations in extruders %2. The default " "intent will be used instead" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21 msgctxt "@label shown when we load a Gcode file" msgid "Print setup disabled. G-code file can not be modified." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144 msgctxt "@button" msgid "Recommended" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158 msgctxt "@button" msgid "Custom" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 msgctxt "@label:Should be short" msgid "On" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 msgctxt "@label:Should be short" msgid "Off" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33 msgctxt "@label" msgid "Experimental" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29 msgctxt "@label" msgid "Adhesion" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74 msgctxt "@label" msgid "" "Enable printing a brim or raft. This will add a flat area around or under " "your object which is easy to cut off afterwards." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193 msgctxt "@label" msgid "Gradual infill" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232 msgctxt "@label" msgid "" "Gradual infill will gradually increase the amount of infill towards the top." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81 msgctxt "@tooltip" msgid "" "You have modified some profile settings. If you want to change these go to " "custom mode." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30 msgctxt "@label" msgid "Support" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71 msgctxt "@label" msgid "" "Generate structures to support parts of the model which have overhangs. " "Without these structures, such parts would collapse during printing." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200 msgctxt "@label" msgid "" "Some hidden settings use values different from their normal calculated " "value.\n" "\n" "Click to make these settings visible." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81 msgctxt "@label" msgid "" "This setting is not used because all the settings that it influences are " "overridden." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187 msgctxt "@label" msgid "" "This setting is always shared between all extruders. Changing it here will " "change the value for all extruders." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value " "set.\n" "\n" "Click to restore the calculated value." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68 msgctxt "@label:textbox" msgid "Search settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456 msgctxt "@action:menu" msgid "Copy value to all extruders" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465 msgctxt "@action:menu" msgid "Copy all changed values to all extruders" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502 msgctxt "@action:menu" msgid "Hide this setting" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515 msgctxt "@action:menu" msgid "Don't show this setting" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519 msgctxt "@action:menu" msgid "Keep this setting visible" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27 msgctxt "@info:tooltip" msgid "3D View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40 msgctxt "@info:tooltip" msgid "Front View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53 msgctxt "@info:tooltip" msgid "Top View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66 msgctxt "@info:tooltip" msgid "Left View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79 msgctxt "@info:tooltip" msgid "Right View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50 msgctxt "@label" msgid "View type" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" msgid "Add a Cloud printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74 msgctxt "@label" msgid "Waiting for Cloud response" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86 msgctxt "@label" msgid "No printers found in your account?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121 msgctxt "@label" msgid "The following printers in your account have been added in Cura:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204 msgctxt "@button" msgid "Add printer manually" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218 msgctxt "@button" msgid "Finish" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230 msgctxt "@label" msgid "Manufacturer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247 msgctxt "@label" msgid "Profile author" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265 msgctxt "@label" msgid "Printer name" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274 msgctxt "@text" msgid "Please name your printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 msgctxt "@label" msgid "Add a printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39 msgctxt "@label" msgid "Add a networked printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90 msgctxt "@label" msgid "Add a non-networked printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 msgctxt "@label" msgid "There is no printer found over your network." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182 msgctxt "@label" msgid "Refresh" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193 msgctxt "@label" msgid "Add printer by IP" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204 msgctxt "@label" msgid "Add cloud printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240 msgctxt "@label" msgid "Troubleshooting" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" msgid "Add printer by IP address" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133 msgctxt "@text" msgid "Enter your printer's IP address." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158 msgctxt "@button" msgid "Add" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206 msgctxt "@label" msgid "Could not connect to device." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 msgctxt "@label" msgid "Can't connect to your Ultimaker printer?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211 msgctxt "@label" msgid "The printer at this address has not responded yet." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245 msgctxt "@label" msgid "" "This printer cannot be added because it's an unknown printer or it's not the " "host of a group." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 msgctxt "@button" msgid "Back" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347 msgctxt "@button" msgid "Connect" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43 msgctxt "@label" msgid "Ultimaker Account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84 msgctxt "@text" msgid "Your key to connected 3D printing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101 msgctxt "@text" msgid "- Customize your experience with more print profiles and plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104 msgctxt "@text" msgid "- Stay flexible by syncing your setup and loading it anywhere" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107 msgctxt "@text" msgid "- Increase efficiency with a remote workflow on Ultimaker printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157 msgctxt "@button" msgid "Skip" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 msgctxt "@label" msgid "Help us to improve Ultimaker Cura" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57 msgctxt "@text" msgid "" "Ultimaker Cura collects anonymous data to improve print quality and user " "experience, including:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71 msgctxt "@text" msgid "Machine types" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77 msgctxt "@text" msgid "Material usage" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83 msgctxt "@text" msgid "Number of slices" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89 msgctxt "@text" msgid "Print settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102 msgctxt "@text" msgid "" "Data collected by Ultimaker Cura will not contain any personal information." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103 msgctxt "@text" msgid "More information" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 msgctxt "@label" msgid "Empty" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 msgctxt "@label" msgid "User Agreement" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70 msgctxt "@button" msgid "Decline and close" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29 msgctxt "@label" msgid "Welcome to Ultimaker Cura" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47 msgctxt "@text" msgid "" "Please follow these steps to set up\n" "Ultimaker Cura. This will only take a few moments." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58 msgctxt "@button" msgid "Get started" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24 msgctxt "@label" msgid "What's new in Ultimaker Cura" msgstr "" #: ModelChecker/plugin.json msgctxt "description" msgid "" "Checks models and print configuration for possible printing issues and give " "suggestions." msgstr "" #: ModelChecker/plugin.json msgctxt "name" msgid "Model Checker" msgstr "" #: 3MFReader/plugin.json msgctxt "description" msgid "Provides support for reading 3MF files." msgstr "" #: 3MFReader/plugin.json msgctxt "name" msgid "3MF Reader" msgstr "" #: 3MFWriter/plugin.json msgctxt "description" msgid "Provides support for writing 3MF files." msgstr "" #: 3MFWriter/plugin.json msgctxt "name" msgid "3MF Writer" msgstr "" #: AMFReader/plugin.json msgctxt "description" msgid "Provides support for reading AMF files." msgstr "" #: AMFReader/plugin.json msgctxt "name" msgid "AMF Reader" msgstr "" #: CuraDrive/plugin.json msgctxt "description" msgid "Backup and restore your configuration." msgstr "" #: CuraDrive/plugin.json msgctxt "name" msgid "Cura Backups" msgstr "" #: CuraEngineBackend/plugin.json msgctxt "description" msgid "Provides the link to the CuraEngine slicing backend." msgstr "" #: CuraEngineBackend/plugin.json msgctxt "name" msgid "CuraEngine Backend" msgstr "" #: CuraProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing Cura profiles." msgstr "" #: CuraProfileReader/plugin.json msgctxt "name" msgid "Cura Profile Reader" msgstr "" #: CuraProfileWriter/plugin.json msgctxt "description" msgid "Provides support for exporting Cura profiles." msgstr "" #: CuraProfileWriter/plugin.json msgctxt "name" msgid "Cura Profile Writer" msgstr "" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." msgstr "" #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" msgstr "" #: FirmwareUpdater/plugin.json msgctxt "description" msgid "Provides a machine actions for updating firmware." msgstr "" #: FirmwareUpdater/plugin.json msgctxt "name" msgid "Firmware Updater" msgstr "" #: GCodeGzReader/plugin.json msgctxt "description" msgid "Reads g-code from a compressed archive." msgstr "" #: GCodeGzReader/plugin.json msgctxt "name" msgid "Compressed G-code Reader" msgstr "" #: GCodeGzWriter/plugin.json msgctxt "description" msgid "Writes g-code to a compressed archive." msgstr "" #: GCodeGzWriter/plugin.json msgctxt "name" msgid "Compressed G-code Writer" msgstr "" #: GCodeProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from g-code files." msgstr "" #: GCodeProfileReader/plugin.json msgctxt "name" msgid "G-code Profile Reader" msgstr "" #: GCodeReader/plugin.json msgctxt "description" msgid "Allows loading and displaying G-code files." msgstr "" #: GCodeReader/plugin.json msgctxt "name" msgid "G-code Reader" msgstr "" #: GCodeWriter/plugin.json msgctxt "description" msgid "Writes g-code to a file." msgstr "" #: GCodeWriter/plugin.json msgctxt "name" msgid "G-code Writer" msgstr "" #: ImageReader/plugin.json msgctxt "description" msgid "Enables ability to generate printable geometry from 2D image files." msgstr "" #: ImageReader/plugin.json msgctxt "name" msgid "Image Reader" msgstr "" #: LegacyProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from legacy Cura versions." msgstr "" #: LegacyProfileReader/plugin.json msgctxt "name" msgid "Legacy Cura Profile Reader" msgstr "" #: MachineSettingsAction/plugin.json msgctxt "description" msgid "" "Provides a way to change machine settings (such as build volume, nozzle " "size, etc.)." msgstr "" #: MachineSettingsAction/plugin.json msgctxt "name" msgid "Machine Settings Action" msgstr "" #: MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." msgstr "" #: MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" msgstr "" #: PerObjectSettingsTool/plugin.json msgctxt "description" msgid "Provides the Per Model Settings." msgstr "" #: PerObjectSettingsTool/plugin.json msgctxt "name" msgid "Per Model Settings Tool" msgstr "" #: PostProcessingPlugin/plugin.json msgctxt "description" msgid "Extension that allows for user created scripts for post processing" msgstr "" #: PostProcessingPlugin/plugin.json msgctxt "name" msgid "Post Processing" msgstr "" #: PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." msgstr "" #: PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" msgstr "" #: PreviewStage/plugin.json msgctxt "description" msgid "Provides a preview stage in Cura." msgstr "" #: PreviewStage/plugin.json msgctxt "name" msgid "Preview Stage" msgstr "" #: RemovableDriveOutputDevice/plugin.json msgctxt "description" msgid "Provides removable drive hotplugging and writing support." msgstr "" #: RemovableDriveOutputDevice/plugin.json msgctxt "name" msgid "Removable Drive Output Device Plugin" msgstr "" #: SentryLogger/plugin.json msgctxt "description" msgid "Logs certain events so that they can be used by the crash reporter" msgstr "" #: SentryLogger/plugin.json msgctxt "name" msgid "Sentry Logger" msgstr "" #: SimulationView/plugin.json msgctxt "description" msgid "Provides the Simulation view." msgstr "" #: SimulationView/plugin.json msgctxt "name" msgid "Simulation View" msgstr "" #: SliceInfoPlugin/plugin.json msgctxt "description" msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "" #: SliceInfoPlugin/plugin.json msgctxt "name" msgid "Slice info" msgstr "" #: SolidView/plugin.json msgctxt "description" msgid "Provides a normal solid mesh view." msgstr "" #: SolidView/plugin.json msgctxt "name" msgid "Solid View" msgstr "" #: SupportEraser/plugin.json msgctxt "description" msgid "" "Creates an eraser mesh to block the printing of support in certain places" msgstr "" #: SupportEraser/plugin.json msgctxt "name" msgid "Support Eraser" msgstr "" #: Toolbox/plugin.json msgctxt "description" msgid "Find, manage and install new Cura packages." msgstr "" #: Toolbox/plugin.json msgctxt "name" msgid "Toolbox" msgstr "" #: TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." msgstr "" #: TrimeshReader/plugin.json msgctxt "name" msgid "Trimesh Reader" msgstr "" #: UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." msgstr "" #: UFPReader/plugin.json msgctxt "name" msgid "UFP Reader" msgstr "" #: UFPWriter/plugin.json msgctxt "description" msgid "Provides support for writing Ultimaker Format Packages." msgstr "" #: UFPWriter/plugin.json msgctxt "name" msgid "UFP Writer" msgstr "" #: UltimakerMachineActions/plugin.json msgctxt "description" msgid "" "Provides machine actions for Ultimaker machines (such as bed leveling " "wizard, selecting upgrades, etc.)." msgstr "" #: UltimakerMachineActions/plugin.json msgctxt "name" msgid "Ultimaker machine actions" msgstr "" #: UM3NetworkPrinting/plugin.json msgctxt "description" msgid "Manages network connections to Ultimaker networked printers." msgstr "" #: UM3NetworkPrinting/plugin.json msgctxt "name" msgid "Ultimaker Network Connection" msgstr "" #: USBPrinting/plugin.json msgctxt "description" msgid "" "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "" #: USBPrinting/plugin.json msgctxt "name" msgid "USB printing" msgstr "" #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "" #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" msgid "Version Upgrade 2.1 to 2.2" msgstr "" #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "" #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "" #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "" #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" msgid "Version Upgrade 2.5 to 2.6" msgstr "" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" msgid "Version Upgrade 2.6 to 2.7" msgstr "" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "" #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "" #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" msgid "Version Upgrade 3.0 to 3.1" msgstr "" #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "" #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "" #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "" #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "" #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "" #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "" #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "" #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" msgid "Version Upgrade 3.5 to 4.0" msgstr "" #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "" #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" msgid "Version Upgrade 4.0 to 4.1" msgstr "" #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "" #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" msgid "Version Upgrade 4.1 to 4.2" msgstr "" #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "" #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" msgid "Version Upgrade 4.2 to 4.3" msgstr "" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" msgid "Version Upgrade 4.3 to 4.4" msgstr "" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" msgid "Version Upgrade 4.4 to 4.5" msgstr "" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" msgid "Version Upgrade 4.5 to 4.6" msgstr "" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.2 to 4.7" msgstr "" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" msgid "Version Upgrade 4.7 to 4.8" msgstr "" #: X3DReader/plugin.json msgctxt "description" msgid "Provides support for reading X3D files." msgstr "" #: X3DReader/plugin.json msgctxt "name" msgid "X3D Reader" msgstr "" #: XmlMaterialProfile/plugin.json msgctxt "description" msgid "Provides capabilities to read and write XML-based material profiles." msgstr "" #: XmlMaterialProfile/plugin.json msgctxt "name" msgid "Material Profiles" msgstr "" #: XRayView/plugin.json msgctxt "description" msgid "Provides the X-Ray view." msgstr "" #: XRayView/plugin.json msgctxt "name" msgid "X-Ray View" msgstr ""