#, fuzzy msgid "" msgstr "" "Project-Id-Version: Uranium json setting files\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2020-10-19 13:15+0000\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #: fdmprinter.def.json msgctxt "machine_settings label" msgid "Machine" msgstr "" #: fdmprinter.def.json msgctxt "machine_settings description" msgid "Machine specific settings" msgstr "" #: fdmprinter.def.json msgctxt "machine_name label" msgid "Machine Type" msgstr "" #: fdmprinter.def.json msgctxt "machine_name description" msgid "The name of your 3D printer model." msgstr "" #: fdmprinter.def.json msgctxt "machine_show_variants label" msgid "Show Machine Variants" msgstr "" #: fdmprinter.def.json msgctxt "machine_show_variants description" msgid "" "Whether to show the different variants of this machine, which are described " "in separate json files." msgstr "" #: fdmprinter.def.json msgctxt "machine_start_gcode label" msgid "Start G-code" msgstr "" #: fdmprinter.def.json msgctxt "machine_start_gcode description" msgid "" "G-code commands to be executed at the very start - separated by \n" "." msgstr "" #: fdmprinter.def.json msgctxt "machine_end_gcode label" msgid "End G-code" msgstr "" #: fdmprinter.def.json msgctxt "machine_end_gcode description" msgid "" "G-code commands to be executed at the very end - separated by \n" "." msgstr "" #: fdmprinter.def.json msgctxt "material_guid label" msgid "Material GUID" msgstr "" #: fdmprinter.def.json msgctxt "material_guid description" msgid "GUID of the material. This is set automatically." msgstr "" #: fdmprinter.def.json msgctxt "material_diameter label" msgid "Diameter" msgstr "" #: fdmprinter.def.json msgctxt "material_diameter description" msgid "" "Adjusts the diameter of the filament used. Match this value with the " "diameter of the used filament." msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_wait label" msgid "Wait for Build Plate Heatup" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_wait description" msgid "" "Whether to insert a command to wait until the build plate temperature is " "reached at the start." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_wait label" msgid "Wait for Nozzle Heatup" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_wait description" msgid "Whether to wait until the nozzle temperature is reached at the start." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_prepend label" msgid "Include Material Temperatures" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temp_prepend description" msgid "" "Whether to include nozzle temperature commands at the start of the gcode. " "When the start_gcode already contains nozzle temperature commands Cura " "frontend will automatically disable this setting." msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_prepend label" msgid "Include Build Plate Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temp_prepend description" msgid "" "Whether to include build plate temperature commands at the start of the " "gcode. When the start_gcode already contains build plate temperature " "commands Cura frontend will automatically disable this setting." msgstr "" #: fdmprinter.def.json msgctxt "machine_width label" msgid "Machine Width" msgstr "" #: fdmprinter.def.json msgctxt "machine_width description" msgid "The width (X-direction) of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_depth label" msgid "Machine Depth" msgstr "" #: fdmprinter.def.json msgctxt "machine_depth description" msgid "The depth (Y-direction) of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_shape label" msgid "Build Plate Shape" msgstr "" #: fdmprinter.def.json msgctxt "machine_shape description" msgid "" "The shape of the build plate without taking unprintable areas into account." msgstr "" #: fdmprinter.def.json msgctxt "machine_shape option rectangular" msgid "Rectangular" msgstr "" #: fdmprinter.def.json msgctxt "machine_shape option elliptic" msgid "Elliptic" msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type label" msgid "Build Plate Material" msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type description" msgid "The material of the build plate installed on the printer." msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type option glass" msgid "Glass" msgstr "" #: fdmprinter.def.json msgctxt "machine_buildplate_type option aluminum" msgid "Aluminum" msgstr "" #: fdmprinter.def.json msgctxt "machine_height label" msgid "Machine Height" msgstr "" #: fdmprinter.def.json msgctxt "machine_height description" msgid "The height (Z-direction) of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_bed label" msgid "Has Heated Build Plate" msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_bed description" msgid "Whether the machine has a heated build plate present." msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_build_volume label" msgid "Has Build Volume Temperature Stabilization" msgstr "" #: fdmprinter.def.json msgctxt "machine_heated_build_volume description" msgid "Whether the machine is able to stabilize the build volume temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_always_write_active_tool label" msgid "Always Write Active Tool" msgstr "" #: fdmprinter.def.json msgctxt "machine_always_write_active_tool description" msgid "" "Write active tool after sending temp commands to inactive tool. Required for " "Dual Extruder printing with Smoothie or other firmware with modal tool " "commands." msgstr "" #: fdmprinter.def.json msgctxt "machine_center_is_zero label" msgid "Is Center Origin" msgstr "" #: fdmprinter.def.json msgctxt "machine_center_is_zero description" msgid "" "Whether the X/Y coordinates of the zero position of the printer is at the " "center of the printable area." msgstr "" #: fdmprinter.def.json msgctxt "machine_extruder_count label" msgid "Number of Extruders" msgstr "" #: fdmprinter.def.json msgctxt "machine_extruder_count description" msgid "" "Number of extruder trains. An extruder train is the combination of a feeder, " "bowden tube, and nozzle." msgstr "" #: fdmprinter.def.json msgctxt "extruders_enabled_count label" msgid "Number of Extruders That Are Enabled" msgstr "" #: fdmprinter.def.json msgctxt "extruders_enabled_count description" msgid "" "Number of extruder trains that are enabled; automatically set in software" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_tip_outer_diameter label" msgid "Outer Nozzle Diameter" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_tip_outer_diameter description" msgid "The outer diameter of the tip of the nozzle." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_head_distance label" msgid "Nozzle Length" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_head_distance description" msgid "" "The height difference between the tip of the nozzle and the lowest part of " "the print head." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_expansion_angle label" msgid "Nozzle Angle" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_expansion_angle description" msgid "" "The angle between the horizontal plane and the conical part right above the " "tip of the nozzle." msgstr "" #: fdmprinter.def.json msgctxt "machine_heat_zone_length label" msgid "Heat Zone Length" msgstr "" #: fdmprinter.def.json msgctxt "machine_heat_zone_length description" msgid "" "The distance from the tip of the nozzle in which heat from the nozzle is " "transferred to the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_temp_enabled label" msgid "Enable Nozzle Temperature Control" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_temp_enabled description" msgid "" "Whether to control temperature from Cura. Turn this off to control nozzle " "temperature from outside of Cura." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_heat_up_speed label" msgid "Heat Up Speed" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_heat_up_speed description" msgid "" "The speed (°C/s) by which the nozzle heats up averaged over the window of " "normal printing temperatures and the standby temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_cool_down_speed label" msgid "Cool Down Speed" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_cool_down_speed description" msgid "" "The speed (°C/s) by which the nozzle cools down averaged over the window of " "normal printing temperatures and the standby temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_min_cool_heat_time_window label" msgid "Minimal Time Standby Temperature" msgstr "" #: fdmprinter.def.json msgctxt "machine_min_cool_heat_time_window description" msgid "" "The minimal time an extruder has to be inactive before the nozzle is cooled. " "Only when an extruder is not used for longer than this time will it be " "allowed to cool down to the standby temperature." msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor label" msgid "G-code Flavor" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor description" msgid "The type of g-code to be generated." msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option RepRap (Marlin/Sprinter)" msgid "Marlin" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option RepRap (Volumetric)" msgid "Marlin (Volumetric)" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option RepRap (RepRap)" msgid "RepRap" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option UltiGCode" msgid "Ultimaker 2" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option Griffin" msgid "Griffin" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option Makerbot" msgid "Makerbot" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option BFB" msgid "Bits from Bytes" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option MACH3" msgid "Mach3" msgstr "" #: fdmprinter.def.json msgctxt "machine_gcode_flavor option Repetier" msgid "Repetier" msgstr "" #: fdmprinter.def.json msgctxt "machine_firmware_retract label" msgid "Firmware Retraction" msgstr "" #: fdmprinter.def.json msgctxt "machine_firmware_retract description" msgid "" "Whether to use firmware retract commands (G10/G11) instead of using the E " "property in G1 commands to retract the material." msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_share_heater label" msgid "Extruders Share Heater" msgstr "" #: fdmprinter.def.json msgctxt "machine_extruders_share_heater description" msgid "" "Whether the extruders share a single heater rather than each extruder having " "its own heater." msgstr "" #: fdmprinter.def.json msgctxt "machine_disallowed_areas label" msgid "Disallowed Areas" msgstr "" #: fdmprinter.def.json msgctxt "machine_disallowed_areas description" msgid "A list of polygons with areas the print head is not allowed to enter." msgstr "" #: fdmprinter.def.json msgctxt "nozzle_disallowed_areas label" msgid "Nozzle Disallowed Areas" msgstr "" #: fdmprinter.def.json msgctxt "nozzle_disallowed_areas description" msgid "A list of polygons with areas the nozzle is not allowed to enter." msgstr "" #: fdmprinter.def.json msgctxt "machine_head_with_fans_polygon label" msgid "Machine Head & Fan Polygon" msgstr "" #: fdmprinter.def.json msgctxt "machine_head_with_fans_polygon description" msgid "A 2D silhouette of the print head (fan caps included)." msgstr "" #: fdmprinter.def.json msgctxt "gantry_height label" msgid "Gantry Height" msgstr "" #: fdmprinter.def.json msgctxt "gantry_height description" msgid "" "The height difference between the tip of the nozzle and the gantry system (X " "and Y axes)." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_id label" msgid "Nozzle ID" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_id description" msgid "The nozzle ID for an extruder train, such as \"AA 0.4\" and \"BB 0.8\"." msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_size label" msgid "Nozzle Diameter" msgstr "" #: fdmprinter.def.json msgctxt "machine_nozzle_size description" msgid "" "The inner diameter of the nozzle. Change this setting when using a non-" "standard nozzle size." msgstr "" #: fdmprinter.def.json msgctxt "machine_use_extruder_offset_to_offset_coords label" msgid "Offset with Extruder" msgstr "" #: fdmprinter.def.json msgctxt "machine_use_extruder_offset_to_offset_coords description" msgid "Apply the extruder offset to the coordinate system." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_z label" msgid "Extruder Prime Z Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_z description" msgid "" "The Z coordinate of the position where the nozzle primes at the start of " "printing." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_abs label" msgid "Absolute Extruder Prime Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_abs description" msgid "" "Make the extruder prime position absolute rather than relative to the last-" "known location of the head." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_x label" msgid "Maximum Speed X" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_x description" msgid "The maximum speed for the motor of the X-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_y label" msgid "Maximum Speed Y" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_y description" msgid "The maximum speed for the motor of the Y-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_z label" msgid "Maximum Speed Z" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_z description" msgid "The maximum speed for the motor of the Z-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_e label" msgid "Maximum Feedrate" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_feedrate_e description" msgid "The maximum speed of the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_x label" msgid "Maximum Acceleration X" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_x description" msgid "Maximum acceleration for the motor of the X-direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_y label" msgid "Maximum Acceleration Y" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_y description" msgid "Maximum acceleration for the motor of the Y-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_z label" msgid "Maximum Acceleration Z" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_z description" msgid "Maximum acceleration for the motor of the Z-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_e label" msgid "Maximum Filament Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_acceleration_e description" msgid "Maximum acceleration for the motor of the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_acceleration label" msgid "Default Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "machine_acceleration description" msgid "The default acceleration of print head movement." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_xy label" msgid "Default X-Y Jerk" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_xy description" msgid "Default jerk for movement in the horizontal plane." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_z label" msgid "Default Z Jerk" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_z description" msgid "Default jerk for the motor of the Z-direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_e label" msgid "Default Filament Jerk" msgstr "" #: fdmprinter.def.json msgctxt "machine_max_jerk_e description" msgid "Default jerk for the motor of the filament." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_x label" msgid "Steps per Millimeter (X)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_x description" msgid "" "How many steps of the stepper motor will result in one millimeter of " "movement in the X direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_y label" msgid "Steps per Millimeter (Y)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_y description" msgid "" "How many steps of the stepper motor will result in one millimeter of " "movement in the Y direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_z label" msgid "Steps per Millimeter (Z)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_z description" msgid "" "How many steps of the stepper motor will result in one millimeter of " "movement in the Z direction." msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_e label" msgid "Steps per Millimeter (E)" msgstr "" #: fdmprinter.def.json msgctxt "machine_steps_per_mm_e description" msgid "" "How many steps of the stepper motors will result in one millimeter of " "extrusion." msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_x label" msgid "X Endstop in Positive Direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_x description" msgid "" "Whether the endstop of the X axis is in the positive direction (high X " "coordinate) or negative (low X coordinate)." msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_y label" msgid "Y Endstop in Positive Direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_y description" msgid "" "Whether the endstop of the Y axis is in the positive direction (high Y " "coordinate) or negative (low Y coordinate)." msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_z label" msgid "Z Endstop in Positive Direction" msgstr "" #: fdmprinter.def.json msgctxt "machine_endstop_positive_direction_z description" msgid "" "Whether the endstop of the Z axis is in the positive direction (high Z " "coordinate) or negative (low Z coordinate)." msgstr "" #: fdmprinter.def.json msgctxt "machine_minimum_feedrate label" msgid "Minimum Feedrate" msgstr "" #: fdmprinter.def.json msgctxt "machine_minimum_feedrate description" msgid "The minimal movement speed of the print head." msgstr "" #: fdmprinter.def.json msgctxt "machine_feeder_wheel_diameter label" msgid "Feeder Wheel Diameter" msgstr "" #: fdmprinter.def.json msgctxt "machine_feeder_wheel_diameter description" msgid "The diameter of the wheel that drives the material in the feeder." msgstr "" #: fdmprinter.def.json msgctxt "resolution label" msgid "Quality" msgstr "" #: fdmprinter.def.json msgctxt "resolution description" msgid "" "All settings that influence the resolution of the print. These settings have " "a large impact on the quality (and print time)" msgstr "" #: fdmprinter.def.json msgctxt "layer_height label" msgid "Layer Height" msgstr "" #: fdmprinter.def.json msgctxt "layer_height description" msgid "" "The height of each layer in mm. Higher values produce faster prints in lower " "resolution, lower values produce slower prints in higher resolution." msgstr "" #: fdmprinter.def.json msgctxt "layer_height_0 label" msgid "Initial Layer Height" msgstr "" #: fdmprinter.def.json msgctxt "layer_height_0 description" msgid "" "The height of the initial layer in mm. A thicker initial layer makes " "adhesion to the build plate easier." msgstr "" #: fdmprinter.def.json msgctxt "line_width label" msgid "Line Width" msgstr "" #: fdmprinter.def.json msgctxt "line_width description" msgid "" "Width of a single line. Generally, the width of each line should correspond " "to the width of the nozzle. However, slightly reducing this value could " "produce better prints." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width label" msgid "Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width description" msgid "Width of a single wall line." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_0 label" msgid "Outer Wall Line Width" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_0 description" msgid "" "Width of the outermost wall line. By lowering this value, higher levels of " "detail can be printed." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_x label" msgid "Inner Wall(s) Line Width" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_width_x description" msgid "" "Width of a single wall line for all wall lines except the outermost one." msgstr "" #: fdmprinter.def.json msgctxt "skin_line_width label" msgid "Top/Bottom Line Width" msgstr "" #: fdmprinter.def.json msgctxt "skin_line_width description" msgid "Width of a single top/bottom line." msgstr "" #: fdmprinter.def.json msgctxt "infill_line_width label" msgid "Infill Line Width" msgstr "" #: fdmprinter.def.json msgctxt "infill_line_width description" msgid "Width of a single infill line." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_line_width label" msgid "Skirt/Brim Line Width" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_line_width description" msgid "Width of a single skirt or brim line." msgstr "" #: fdmprinter.def.json msgctxt "support_line_width label" msgid "Support Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_line_width description" msgid "Width of a single support structure line." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_line_width label" msgid "Support Interface Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_line_width description" msgid "Width of a single line of support roof or floor." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_width label" msgid "Support Roof Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_width description" msgid "Width of a single support roof line." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_width label" msgid "Support Floor Line Width" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_width description" msgid "Width of a single support floor line." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_line_width label" msgid "Prime Tower Line Width" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_line_width description" msgid "Width of a single prime tower line." msgstr "" #: fdmprinter.def.json msgctxt "initial_layer_line_width_factor label" msgid "Initial Layer Line Width" msgstr "" #: fdmprinter.def.json msgctxt "initial_layer_line_width_factor description" msgid "" "Multiplier of the line width on the first layer. Increasing this could " "improve bed adhesion." msgstr "" #: fdmprinter.def.json msgctxt "shell label" msgid "Shell" msgstr "" #: fdmprinter.def.json msgctxt "shell description" msgid "Shell" msgstr "" #: fdmprinter.def.json msgctxt "wall_extruder_nr label" msgid "Wall Extruder" msgstr "" #: fdmprinter.def.json msgctxt "wall_extruder_nr description" msgid "" "The extruder train used for printing the walls. This is used in multi-" "extrusion." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_extruder_nr label" msgid "Outer Wall Extruder" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_extruder_nr description" msgid "" "The extruder train used for printing the outer wall. This is used in multi-" "extrusion." msgstr "" #: fdmprinter.def.json msgctxt "wall_x_extruder_nr label" msgid "Inner Wall Extruder" msgstr "" #: fdmprinter.def.json msgctxt "wall_x_extruder_nr description" msgid "" "The extruder train used for printing the inner walls. This is used in multi-" "extrusion." msgstr "" #: fdmprinter.def.json msgctxt "wall_thickness label" msgid "Wall Thickness" msgstr "" #: fdmprinter.def.json msgctxt "wall_thickness description" msgid "" "The thickness of the walls in the horizontal direction. This value divided " "by the wall line width defines the number of walls." msgstr "" #: fdmprinter.def.json msgctxt "wall_line_count label" msgid "Wall Line Count" msgstr "" #: fdmprinter.def.json msgctxt "wall_line_count description" msgid "" "The number of walls. When calculated by the wall thickness, this value is " "rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_wipe_dist label" msgid "Outer Wall Wipe Distance" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_wipe_dist description" msgid "" "Distance of a travel move inserted after the outer wall, to hide the Z seam " "better." msgstr "" #: fdmprinter.def.json msgctxt "roofing_extruder_nr label" msgid "Top Surface Skin Extruder" msgstr "" #: fdmprinter.def.json msgctxt "roofing_extruder_nr description" msgid "" "The extruder train used for printing the top most skin. This is used in " "multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "roofing_layer_count label" msgid "Top Surface Skin Layers" msgstr "" #: fdmprinter.def.json msgctxt "roofing_layer_count description" msgid "" "The number of top most skin layers. Usually only one top most layer is " "sufficient to generate higher quality top surfaces." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_extruder_nr label" msgid "Top/Bottom Extruder" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_extruder_nr description" msgid "" "The extruder train used for printing the top and bottom skin. This is used " "in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_thickness label" msgid "Top/Bottom Thickness" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_thickness description" msgid "" "The thickness of the top/bottom layers in the print. This value divided by " "the layer height defines the number of top/bottom layers." msgstr "" #: fdmprinter.def.json msgctxt "top_thickness label" msgid "Top Thickness" msgstr "" #: fdmprinter.def.json msgctxt "top_thickness description" msgid "" "The thickness of the top layers in the print. This value divided by the " "layer height defines the number of top layers." msgstr "" #: fdmprinter.def.json msgctxt "top_layers label" msgid "Top Layers" msgstr "" #: fdmprinter.def.json msgctxt "top_layers description" msgid "" "The number of top layers. When calculated by the top thickness, this value " "is rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "bottom_thickness label" msgid "Bottom Thickness" msgstr "" #: fdmprinter.def.json msgctxt "bottom_thickness description" msgid "" "The thickness of the bottom layers in the print. This value divided by the " "layer height defines the number of bottom layers." msgstr "" #: fdmprinter.def.json msgctxt "bottom_layers label" msgid "Bottom Layers" msgstr "" #: fdmprinter.def.json msgctxt "bottom_layers description" msgid "" "The number of bottom layers. When calculated by the bottom thickness, this " "value is rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "initial_bottom_layers label" msgid "Initial Bottom Layers" msgstr "" #: fdmprinter.def.json msgctxt "initial_bottom_layers description" msgid "" "The number of initial bottom layers, from the build-plate upwards. When " "calculated by the bottom thickness, this value is rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern label" msgid "Top/Bottom Pattern" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern description" msgid "The pattern of the top/bottom layers." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 label" msgid "Bottom Pattern Initial Layer" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 description" msgid "The pattern on the bottom of the print on the first layer." msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "top_bottom_pattern_0 option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "connect_skin_polygons label" msgid "Connect Top/Bottom Polygons" msgstr "" #: fdmprinter.def.json msgctxt "connect_skin_polygons description" msgid "" "Connect top/bottom skin paths where they run next to each other. For the " "concentric pattern enabling this setting greatly reduces the travel time, " "but because the connections can happen midway over infill this feature can " "reduce the top surface quality." msgstr "" #: fdmprinter.def.json msgctxt "skin_angles label" msgid "Top/Bottom Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "skin_angles description" msgid "" "A list of integer line directions to use when the top/bottom layers use the " "lines or zig zag pattern. Elements from the list are used sequentially as " "the layers progress and when the end of the list is reached, it starts at " "the beginning again. The list items are separated by commas and the whole " "list is contained in square brackets. Default is an empty list which means " "use the traditional default angles (45 and 135 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_inset label" msgid "Outer Wall Inset" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_inset description" msgid "" "Inset applied to the path of the outer wall. If the outer wall is smaller " "than the nozzle, and printed after the inner walls, use this offset to get " "the hole in the nozzle to overlap with the inner walls instead of the " "outside of the model." msgstr "" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" msgstr "" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "" "Optimize the order in which walls are printed so as to reduce the number of " "retractions and the distance travelled. Most parts will benefit from this " "being enabled but some may actually take longer so please compare the print " "time estimates with and without optimization. First layer is not optimized " "when choosing brim as build plate adhesion type." msgstr "" #: fdmprinter.def.json msgctxt "outer_inset_first label" msgid "Outer Before Inner Walls" msgstr "" #: fdmprinter.def.json msgctxt "outer_inset_first description" msgid "" "Prints walls in order of outside to inside when enabled. This can help " "improve dimensional accuracy in X and Y when using a high viscosity plastic " "like ABS; however it can decrease outer surface print quality, especially on " "overhangs." msgstr "" #: fdmprinter.def.json msgctxt "alternate_extra_perimeter label" msgid "Alternate Extra Wall" msgstr "" #: fdmprinter.def.json msgctxt "alternate_extra_perimeter description" msgid "" "Prints an extra wall at every other layer. This way infill gets caught " "between these extra walls, resulting in stronger prints." msgstr "" #: fdmprinter.def.json msgctxt "travel_compensate_overlapping_walls_enabled label" msgid "Compensate Wall Overlaps" msgstr "" #: fdmprinter.def.json msgctxt "travel_compensate_overlapping_walls_enabled description" msgid "" "Compensate the flow for parts of a wall being printed where there is already " "a wall in place." msgstr "" #: fdmprinter.def.json msgctxt "travel_compensate_overlapping_walls_0_enabled label" msgid "Compensate Outer Wall Overlaps" msgstr "" #: fdmprinter.def.json msgctxt "travel_compensate_overlapping_walls_0_enabled description" msgid "" "Compensate the flow for parts of an outer wall being printed where there is " "already a wall in place." msgstr "" #: fdmprinter.def.json msgctxt "travel_compensate_overlapping_walls_x_enabled label" msgid "Compensate Inner Wall Overlaps" msgstr "" #: fdmprinter.def.json msgctxt "travel_compensate_overlapping_walls_x_enabled description" msgid "" "Compensate the flow for parts of an inner wall being printed where there is " "already a wall in place." msgstr "" #: fdmprinter.def.json msgctxt "wall_min_flow label" msgid "Minimum Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_min_flow description" msgid "" "Minimum allowed percentage flow for a wall line. The wall overlap " "compensation reduces a wall's flow when it lies close to an existing wall. " "Walls whose flow is less than this value will be replaced with a travel " "move. When using this setting, you must enable the wall overlap compensation " "and print the outer wall before inner walls." msgstr "" #: fdmprinter.def.json msgctxt "wall_min_flow_retract label" msgid "Prefer Retract" msgstr "" #: fdmprinter.def.json msgctxt "wall_min_flow_retract description" msgid "" "If enabled, retraction is used rather than combing for travel moves that " "replace walls whose flow is below the minimum flow threshold." msgstr "" #: fdmprinter.def.json msgctxt "fill_perimeter_gaps label" msgid "Fill Gaps Between Walls" msgstr "" #: fdmprinter.def.json msgctxt "fill_perimeter_gaps description" msgid "Fills the gaps between walls where no walls fit." msgstr "" #: fdmprinter.def.json msgctxt "fill_perimeter_gaps option nowhere" msgid "Nowhere" msgstr "" #: fdmprinter.def.json msgctxt "fill_perimeter_gaps option everywhere" msgid "Everywhere" msgstr "" #: fdmprinter.def.json msgctxt "filter_out_tiny_gaps label" msgid "Filter Out Tiny Gaps" msgstr "" #: fdmprinter.def.json msgctxt "filter_out_tiny_gaps description" msgid "Filter out tiny gaps to reduce blobs on outside of model." msgstr "" #: fdmprinter.def.json msgctxt "fill_outline_gaps label" msgid "Print Thin Walls" msgstr "" #: fdmprinter.def.json msgctxt "fill_outline_gaps description" msgid "" "Print pieces of the model which are horizontally thinner than the nozzle " "size." msgstr "" #: fdmprinter.def.json msgctxt "xy_offset label" msgid "Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "xy_offset description" msgid "" "Amount of offset applied to all polygons in each layer. Positive values can " "compensate for too big holes; negative values can compensate for too small " "holes." msgstr "" #: fdmprinter.def.json msgctxt "xy_offset_layer_0 label" msgid "Initial Layer Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "xy_offset_layer_0 description" msgid "" "Amount of offset applied to all polygons in the first layer. A negative " "value can compensate for squishing of the first layer known as \"elephant's " "foot\"." msgstr "" #: fdmprinter.def.json msgctxt "hole_xy_offset label" msgid "Hole Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "hole_xy_offset description" msgid "" "Amount of offset applied to all holes in each layer. Positive values " "increase the size of the holes, negative values reduce the size of the holes." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type label" msgid "Z Seam Alignment" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type description" msgid "" "Starting point of each path in a layer. When paths in consecutive layers " "start at the same point a vertical seam may show on the print. When aligning " "these near a user specified location, the seam is easiest to remove. When " "placed randomly the inaccuracies at the paths' start will be less " "noticeable. When taking the shortest path the print will be quicker." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option back" msgid "User Specified" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option shortest" msgid "Shortest" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option random" msgid "Random" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position label" msgid "Z Seam Position" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position description" msgid "The position near where to start printing each part in a layer." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option backleft" msgid "Back Left" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option back" msgid "Back" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option backright" msgid "Back Right" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option right" msgid "Right" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option frontright" msgid "Front Right" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option front" msgid "Front" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option frontleft" msgid "Front Left" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_position option left" msgid "Left" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_x label" msgid "Z Seam X" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_x description" msgid "" "The X coordinate of the position near where to start printing each part in a " "layer." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_y label" msgid "Z Seam Y" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_y description" msgid "" "The Y coordinate of the position near where to start printing each part in a " "layer." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "" "Control whether corners on the model outline influence the position of the " "seam. None means that corners have no influence on the seam position. Hide " "Seam makes the seam more likely to occur on an inside corner. Expose Seam " "makes the seam more likely to occur on an outside corner. Hide or Expose " "Seam makes the seam more likely to occur at an inside or outside corner. " "Smart Hiding allows both inside and outside corners, but chooses inside " "corners more frequently, if appropriate." msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_weighted" msgid "Smart Hiding" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_relative label" msgid "Z Seam Relative" msgstr "" #: fdmprinter.def.json msgctxt "z_seam_relative description" msgid "" "When enabled, the z seam coordinates are relative to each part's centre. " "When disabled, the coordinates define an absolute position on the build " "plate." msgstr "" #: fdmprinter.def.json msgctxt "skin_no_small_gaps_heuristic label" msgid "No Skin in Z Gaps" msgstr "" #: fdmprinter.def.json msgctxt "skin_no_small_gaps_heuristic description" msgid "" "When the model has small vertical gaps of only a few layers, there should " "normally be skin around those layers in the narrow space. Enable this " "setting to not generate skin if the vertical gap is very small. This " "improves printing time and slicing time, but technically leaves infill " "exposed to the air." msgstr "" #: fdmprinter.def.json msgctxt "skin_outline_count label" msgid "Extra Skin Wall Count" msgstr "" #: fdmprinter.def.json msgctxt "skin_outline_count description" msgid "" "Replaces the outermost part of the top/bottom pattern with a number of " "concentric lines. Using one or two lines improves roofs that start on infill " "material." msgstr "" #: fdmprinter.def.json msgctxt "ironing_enabled label" msgid "Enable Ironing" msgstr "" #: fdmprinter.def.json msgctxt "ironing_enabled description" msgid "" "Go over the top surface one additional time, but this time extruding very " "little material. This is meant to melt the plastic on top further, creating " "a smoother surface. The pressure in the nozzle chamber is kept high so that " "the creases in the surface are filled with material." msgstr "" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" msgstr "" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "" "Only perform ironing on the very last layer of the mesh. This saves time if " "the lower layers don't need a smooth surface finish." msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern label" msgid "Ironing Pattern" msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern description" msgid "The pattern to use for ironing top surfaces." msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "ironing_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "ironing_line_spacing label" msgid "Ironing Line Spacing" msgstr "" #: fdmprinter.def.json msgctxt "ironing_line_spacing description" msgid "The distance between the lines of ironing." msgstr "" #: fdmprinter.def.json msgctxt "ironing_flow label" msgid "Ironing Flow" msgstr "" #: fdmprinter.def.json msgctxt "ironing_flow description" msgid "" "The amount of material, relative to a normal skin line, to extrude during " "ironing. Keeping the nozzle filled helps filling some of the crevices of the " "top surface, but too much results in overextrusion and blips on the side of " "the surface." msgstr "" #: fdmprinter.def.json msgctxt "ironing_inset label" msgid "Ironing Inset" msgstr "" #: fdmprinter.def.json msgctxt "ironing_inset description" msgid "" "A distance to keep from the edges of the model. Ironing all the way to the " "edge of the mesh may result in a jagged edge on your print." msgstr "" #: fdmprinter.def.json msgctxt "speed_ironing label" msgid "Ironing Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_ironing description" msgid "The speed at which to pass over the top surface." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_ironing label" msgid "Ironing Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_ironing description" msgid "The acceleration with which ironing is performed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_ironing label" msgid "Ironing Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_ironing description" msgid "The maximum instantaneous velocity change while performing ironing." msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap label" msgid "Skin Overlap Percentage" msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap description" msgid "" "Adjust the amount of overlap between the walls and (the endpoints of) the " "skin-centerlines, as a percentage of the line widths of the skin lines and " "the innermost wall. A slight overlap allows the walls to connect firmly to " "the skin. Note that, given an equal skin and wall line-width, any percentage " "over 50% may already cause any skin to go past the wall, because at that " "point the position of the nozzle of the skin-extruder may already reach past " "the middle of the wall." msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap_mm label" msgid "Skin Overlap" msgstr "" #: fdmprinter.def.json msgctxt "skin_overlap_mm description" msgid "" "Adjust the amount of overlap between the walls and (the endpoints of) the " "skin-centerlines. A slight overlap allows the walls to connect firmly to the " "skin. Note that, given an equal skin and wall line-width, any value over " "half the width of the wall may already cause any skin to go past the wall, " "because at that point the position of the nozzle of the skin-extruder may " "already reach past the middle of the wall." msgstr "" #: fdmprinter.def.json msgctxt "infill label" msgid "Infill" msgstr "" #: fdmprinter.def.json msgctxt "infill description" msgid "Infill" msgstr "" #: fdmprinter.def.json msgctxt "infill_extruder_nr label" msgid "Infill Extruder" msgstr "" #: fdmprinter.def.json msgctxt "infill_extruder_nr description" msgid "" "The extruder train used for printing infill. This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_density label" msgid "Infill Density" msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_density description" msgid "Adjusts the density of infill of the print." msgstr "" #: fdmprinter.def.json msgctxt "infill_line_distance label" msgid "Infill Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "infill_line_distance description" msgid "" "Distance between the printed infill lines. This setting is calculated by the " "infill density and the infill line width." msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern label" msgid "Infill Pattern" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "" "The pattern of the infill material of the print. The line and zig zag infill " "swap direction on alternate layers, reducing material cost. The grid, " "triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric " "patterns are fully printed every layer. Gyroid, cubic, quarter cubic and " "octet infill change with every layer to provide a more equal distribution of " "strength over each direction." msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option trihexagon" msgid "Tri-Hexagon" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cubic" msgid "Cubic" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cubicsubdiv" msgid "Cubic Subdivision" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" msgstr "" #: fdmprinter.def.json msgctxt "infill_pattern option gyroid" msgid "Gyroid" msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "" "Connect the ends where the infill pattern meets the inner wall using a line " "which follows the shape of the inner wall. Enabling this setting can make " "the infill adhere to the walls better and reduce the effects of infill on " "the quality of vertical surfaces. Disabling this setting reduces the amount " "of material used." msgstr "" #: fdmprinter.def.json msgctxt "connect_infill_polygons label" msgid "Connect Infill Polygons" msgstr "" #: fdmprinter.def.json msgctxt "connect_infill_polygons description" msgid "" "Connect infill paths where they run next to each other. For infill patterns " "which consist of several closed polygons, enabling this setting greatly " "reduces the travel time." msgstr "" #: fdmprinter.def.json msgctxt "infill_angles label" msgid "Infill Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "infill_angles description" msgid "" "A list of integer line directions to use. Elements from the list are used " "sequentially as the layers progress and when the end of the list is reached, " "it starts at the beginning again. The list items are separated by commas and " "the whole list is contained in square brackets. Default is an empty list " "which means use the traditional default angles (45 and 135 degrees for the " "lines and zig zag patterns and 45 degrees for all other patterns)." msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_x label" msgid "Infill X Offset" msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_x description" msgid "The infill pattern is moved this distance along the X axis." msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_y label" msgid "Infill Y Offset" msgstr "" #: fdmprinter.def.json msgctxt "infill_offset_y description" msgid "The infill pattern is moved this distance along the Y axis." msgstr "" #: fdmprinter.def.json msgctxt "infill_randomize_start_location label" msgid "Randomize Infill Start" msgstr "" #: fdmprinter.def.json msgctxt "infill_randomize_start_location description" msgid "" "Randomize which infill line is printed first. This prevents one segment " "becoming the strongest, but it does so at the cost of an additional travel " "move." msgstr "" #: fdmprinter.def.json msgctxt "infill_multiplier label" msgid "Infill Line Multiplier" msgstr "" #: fdmprinter.def.json msgctxt "infill_multiplier description" msgid "" "Convert each infill line to this many lines. The extra lines do not cross " "over each other, but avoid each other. This makes the infill stiffer, but " "increases print time and material usage." msgstr "" #: fdmprinter.def.json msgctxt "infill_wall_line_count label" msgid "Extra Infill Wall Count" msgstr "" #: fdmprinter.def.json msgctxt "infill_wall_line_count description" msgid "" "Add extra walls around the infill area. Such walls can make top/bottom skin " "lines sag down less which means you need less top/bottom skin layers for the " "same quality at the cost of some extra material.\n" "This feature can combine with the Connect Infill Polygons to connect all the " "infill into a single extrusion path without the need for travels or " "retractions if configured right." msgstr "" #: fdmprinter.def.json msgctxt "sub_div_rad_add label" msgid "Cubic Subdivision Shell" msgstr "" #: fdmprinter.def.json msgctxt "sub_div_rad_add description" msgid "" "An addition to the radius from the center of each cube to check for the " "boundary of the model, as to decide whether this cube should be subdivided. " "Larger values lead to a thicker shell of small cubes near the boundary of " "the model." msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap label" msgid "Infill Overlap Percentage" msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap description" msgid "" "The amount of overlap between the infill and the walls as a percentage of " "the infill line width. A slight overlap allows the walls to connect firmly " "to the infill." msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap_mm label" msgid "Infill Overlap" msgstr "" #: fdmprinter.def.json msgctxt "infill_overlap_mm description" msgid "" "The amount of overlap between the infill and the walls. A slight overlap " "allows the walls to connect firmly to the infill." msgstr "" #: fdmprinter.def.json msgctxt "infill_wipe_dist label" msgid "Infill Wipe Distance" msgstr "" #: fdmprinter.def.json msgctxt "infill_wipe_dist description" msgid "" "Distance of a travel move inserted after every infill line, to make the " "infill stick to the walls better. This option is similar to infill overlap, " "but without extrusion and only on one end of the infill line." msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_thickness label" msgid "Infill Layer Thickness" msgstr "" #: fdmprinter.def.json msgctxt "infill_sparse_thickness description" msgid "" "The thickness per layer of infill material. This value should always be a " "multiple of the layer height and is otherwise rounded." msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_steps label" msgid "Gradual Infill Steps" msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_steps description" msgid "" "Number of times to reduce the infill density by half when getting further " "below top surfaces. Areas which are closer to top surfaces get a higher " "density, up to the Infill Density." msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_step_height label" msgid "Gradual Infill Step Height" msgstr "" #: fdmprinter.def.json msgctxt "gradual_infill_step_height description" msgid "" "The height of infill of a given density before switching to half the density." msgstr "" #: fdmprinter.def.json msgctxt "infill_before_walls label" msgid "Infill Before Walls" msgstr "" #: fdmprinter.def.json msgctxt "infill_before_walls description" msgid "" "Print the infill before printing the walls. Printing the walls first may " "lead to more accurate walls, but overhangs print worse. Printing the infill " "first leads to sturdier walls, but the infill pattern might sometimes show " "through the surface." msgstr "" #: fdmprinter.def.json msgctxt "min_infill_area label" msgid "Minimum Infill Area" msgstr "" #: fdmprinter.def.json msgctxt "min_infill_area description" msgid "Don't generate areas of infill smaller than this (use skin instead)." msgstr "" #: fdmprinter.def.json msgctxt "infill_support_enabled label" msgid "Infill Support" msgstr "" #: fdmprinter.def.json msgctxt "infill_support_enabled description" msgid "" "Print infill structures only where tops of the model should be supported. " "Enabling this reduces print time and material usage, but leads to ununiform " "object strength." msgstr "" #: fdmprinter.def.json msgctxt "infill_support_angle label" msgid "Infill Overhang Angle" msgstr "" #: fdmprinter.def.json msgctxt "infill_support_angle description" msgid "" "The minimum angle of internal overhangs for which infill is added. At a " "value of 0° objects are totally filled with infill, 90° will not provide any " "infill." msgstr "" #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" msgstr "" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "" "The largest width of skin areas which are to be removed. Every skin area " "smaller than this value will disappear. This can help in limiting the amount " "of time and material spent on printing top/bottom skin at slanted surfaces " "in the model." msgstr "" #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" msgstr "" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "" "The largest width of top skin areas which are to be removed. Every skin area " "smaller than this value will disappear. This can help in limiting the amount " "of time and material spent on printing top skin at slanted surfaces in the " "model." msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "" "The largest width of bottom skin areas which are to be removed. Every skin " "area smaller than this value will disappear. This can help in limiting the " "amount of time and material spent on printing bottom skin at slanted " "surfaces in the model." msgstr "" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" msgid "Skin Expand Distance" msgstr "" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "" "The distance the skins are expanded into the infill. Higher values makes the " "skin attach better to the infill pattern and makes the walls on neighboring " "layers adhere better to the skin. Lower values save amount of material used." msgstr "" #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" msgstr "" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "" "The distance the top skins are expanded into the infill. Higher values makes " "the skin attach better to the infill pattern and makes the walls on the " "layer above adhere better to the skin. Lower values save amount of material " "used." msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" msgstr "" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "" "The distance the bottom skins are expanded into the infill. Higher values " "makes the skin attach better to the infill pattern and makes the skin adhere " "better to the walls on the layer below. Lower values save amount of material " "used." msgstr "" #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" msgid "Maximum Skin Angle for Expansion" msgstr "" #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion description" msgid "" "Top and/or bottom surfaces of your object with an angle larger than this " "setting, won't have their top/bottom skin expanded. This avoids expanding " "the narrow skin areas that are created when the model surface has a near " "vertical slope. An angle of 0° is horizontal, while an angle of 90° is " "vertical." msgstr "" #: fdmprinter.def.json msgctxt "min_skin_width_for_expansion label" msgid "Minimum Skin Width for Expansion" msgstr "" #: fdmprinter.def.json msgctxt "min_skin_width_for_expansion description" msgid "" "Skin areas narrower than this are not expanded. This avoids expanding the " "narrow skin areas that are created when the model surface has a slope close " "to the vertical." msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_thickness label" msgid "Skin Edge Support Thickness" msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_thickness description" msgid "The thickness of the extra infill that supports skin edges." msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_layers label" msgid "Skin Edge Support Layers" msgstr "" #: fdmprinter.def.json msgctxt "skin_edge_support_layers description" msgid "The number of infill layers that supports skin edges." msgstr "" #: fdmprinter.def.json msgctxt "material label" msgid "Material" msgstr "" #: fdmprinter.def.json msgctxt "material description" msgid "Material" msgstr "" #: fdmprinter.def.json msgctxt "default_material_print_temperature label" msgid "Default Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "default_material_print_temperature description" msgid "" "The default temperature used for printing. This should be the \"base\" " "temperature of a material. All other print temperatures should use offsets " "based on this value" msgstr "" #: fdmprinter.def.json msgctxt "build_volume_temperature label" msgid "Build Volume Temperature" msgstr "" #: fdmprinter.def.json msgctxt "build_volume_temperature description" msgid "" "The temperature of the environment to print in. If this is 0, the build " "volume temperature will not be adjusted." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature label" msgid "Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature description" msgid "The temperature used for printing." msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature_layer_0 label" msgid "Printing Temperature Initial Layer" msgstr "" #: fdmprinter.def.json msgctxt "material_print_temperature_layer_0 description" msgid "" "The temperature used for printing the first layer. Set at 0 to disable " "special handling of the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "material_initial_print_temperature label" msgid "Initial Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_initial_print_temperature description" msgid "" "The minimal temperature while heating up to the Printing Temperature at " "which printing can already start." msgstr "" #: fdmprinter.def.json msgctxt "material_final_print_temperature label" msgid "Final Printing Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_final_print_temperature description" msgid "" "The temperature to which to already start cooling down just before the end " "of printing." msgstr "" #: fdmprinter.def.json msgctxt "material_extrusion_cool_down_speed label" msgid "Extrusion Cool Down Speed Modifier" msgstr "" #: fdmprinter.def.json msgctxt "material_extrusion_cool_down_speed description" msgid "" "The extra speed by which the nozzle cools while extruding. The same value is " "used to signify the heat up speed lost when heating up while extruding." msgstr "" #: fdmprinter.def.json msgctxt "default_material_bed_temperature label" msgid "Default Build Plate Temperature" msgstr "" #: fdmprinter.def.json msgctxt "default_material_bed_temperature description" msgid "" "The default temperature used for the heated build plate. This should be the " "\"base\" temperature of a build plate. All other print temperatures should " "use offsets based on this value" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature label" msgid "Build Plate Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature description" msgid "" "The temperature used for the heated build plate. If this is 0, the build " "plate is left unheated." msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature_layer_0 label" msgid "Build Plate Temperature Initial Layer" msgstr "" #: fdmprinter.def.json msgctxt "material_bed_temperature_layer_0 description" msgid "" "The temperature used for the heated build plate at the first layer. If this " "is 0, the build plate is left unheated during the first layer." msgstr "" #: fdmprinter.def.json msgctxt "material_adhesion_tendency label" msgid "Adhesion Tendency" msgstr "" #: fdmprinter.def.json msgctxt "material_adhesion_tendency description" msgid "Surface adhesion tendency." msgstr "" #: fdmprinter.def.json msgctxt "material_surface_energy label" msgid "Surface Energy" msgstr "" #: fdmprinter.def.json msgctxt "material_surface_energy description" msgid "Surface energy." msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage label" msgid "Scaling Factor Shrinkage Compensation" msgstr "" #: fdmprinter.def.json msgctxt "material_shrinkage_percentage description" msgid "" "To compensate for the shrinkage of the material as it cools down, the model " "will be scaled with this factor." msgstr "" #: fdmprinter.def.json msgctxt "material_crystallinity label" msgid "Crystalline Material" msgstr "" #: fdmprinter.def.json msgctxt "material_crystallinity description" msgid "" "Is this material the type that breaks off cleanly when heated (crystalline), " "or is it the type that produces long intertwined polymer chains (non-" "crystalline)?" msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retracted_position label" msgid "Anti-ooze Retracted Position" msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retracted_position description" msgid "How far the material needs to be retracted before it stops oozing." msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retraction_speed label" msgid "Anti-ooze Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_anti_ooze_retraction_speed description" msgid "" "How fast the material needs to be retracted during a filament switch to " "prevent oozing." msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_retracted_position label" msgid "Break Preparation Retracted Position" msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_retracted_position description" msgid "How far the filament can be stretched before it breaks, while heated." msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_speed label" msgid "Break Preparation Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_speed description" msgid "" "How fast the filament needs to be retracted just before breaking it off in a " "retraction." msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_temperature label" msgid "Break Preparation Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_break_preparation_temperature description" msgid "" "The temperature used to purge material, should be roughly equal to the " "highest possible printing temperature." msgstr "" #: fdmprinter.def.json msgctxt "material_break_retracted_position label" msgid "Break Retracted Position" msgstr "" #: fdmprinter.def.json msgctxt "material_break_retracted_position description" msgid "How far to retract the filament in order to break it cleanly." msgstr "" #: fdmprinter.def.json msgctxt "material_break_speed label" msgid "Break Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_break_speed description" msgid "" "The speed at which to retract the filament in order to break it cleanly." msgstr "" #: fdmprinter.def.json msgctxt "material_break_temperature label" msgid "Break Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_break_temperature description" msgid "The temperature at which the filament is broken for a clean break." msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_speed label" msgid "Flush Purge Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_speed description" msgid "How fast to prime the material after switching to a different material." msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_length label" msgid "Flush Purge Length" msgstr "" #: fdmprinter.def.json msgctxt "material_flush_purge_length description" msgid "" "How much material to use to purge the previous material out of the nozzle " "(in length of filament) when switching to a different material." msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_speed label" msgid "End of Filament Purge Speed" msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_speed description" msgid "" "How fast to prime the material after replacing an empty spool with a fresh " "spool of the same material." msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_length label" msgid "End of Filament Purge Length" msgstr "" #: fdmprinter.def.json msgctxt "material_end_of_filament_purge_length description" msgid "" "How much material to use to purge the previous material out of the nozzle " "(in length of filament) when replacing an empty spool with a fresh spool of " "the same material." msgstr "" #: fdmprinter.def.json msgctxt "material_maximum_park_duration label" msgid "Maximum Park Duration" msgstr "" #: fdmprinter.def.json msgctxt "material_maximum_park_duration description" msgid "How long the material can be kept out of dry storage safely." msgstr "" #: fdmprinter.def.json msgctxt "material_no_load_move_factor label" msgid "No Load Move Factor" msgstr "" #: fdmprinter.def.json msgctxt "material_no_load_move_factor description" msgid "" "A factor indicating how much the filament gets compressed between the feeder " "and the nozzle chamber, used to determine how far to move the material for a " "filament switch." msgstr "" #: fdmprinter.def.json msgctxt "material_flow label" msgid "Flow" msgstr "" #: fdmprinter.def.json msgctxt "material_flow description" msgid "" "Flow compensation: the amount of material extruded is multiplied by this " "value." msgstr "" #: fdmprinter.def.json msgctxt "wall_material_flow label" msgid "Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_material_flow description" msgid "Flow compensation on wall lines." msgstr "" #: fdmprinter.def.json msgctxt "wall_0_material_flow label" msgid "Outer Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_0_material_flow description" msgid "Flow compensation on the outermost wall line." msgstr "" #: fdmprinter.def.json msgctxt "wall_x_material_flow label" msgid "Inner Wall(s) Flow" msgstr "" #: fdmprinter.def.json msgctxt "wall_x_material_flow description" msgid "" "Flow compensation on wall lines for all wall lines except the outermost one." msgstr "" #: fdmprinter.def.json msgctxt "skin_material_flow label" msgid "Top/Bottom Flow" msgstr "" #: fdmprinter.def.json msgctxt "skin_material_flow description" msgid "Flow compensation on top/bottom lines." msgstr "" #: fdmprinter.def.json msgctxt "roofing_material_flow label" msgid "Top Surface Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "roofing_material_flow description" msgid "Flow compensation on lines of the areas at the top of the print." msgstr "" #: fdmprinter.def.json msgctxt "infill_material_flow label" msgid "Infill Flow" msgstr "" #: fdmprinter.def.json msgctxt "infill_material_flow description" msgid "Flow compensation on infill lines." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_material_flow label" msgid "Skirt/Brim Flow" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_material_flow description" msgid "Flow compensation on skirt or brim lines." msgstr "" #: fdmprinter.def.json msgctxt "support_material_flow label" msgid "Support Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_material_flow description" msgid "Flow compensation on support structure lines." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_material_flow label" msgid "Support Interface Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_material_flow description" msgid "Flow compensation on lines of support roof or floor." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_material_flow label" msgid "Support Roof Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_material_flow description" msgid "Flow compensation on support roof lines." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_material_flow label" msgid "Support Floor Flow" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_material_flow description" msgid "Flow compensation on support floor lines." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_flow label" msgid "Prime Tower Flow" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_flow description" msgid "Flow compensation on prime tower lines." msgstr "" #: fdmprinter.def.json msgctxt "material_flow_layer_0 label" msgid "Initial Layer Flow" msgstr "" #: fdmprinter.def.json msgctxt "material_flow_layer_0 description" msgid "" "Flow compensation for the first layer: the amount of material extruded on " "the initial layer is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "material_standby_temperature label" msgid "Standby Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_standby_temperature description" msgid "" "The temperature of the nozzle when another nozzle is currently used for " "printing." msgstr "" #: fdmprinter.def.json msgctxt "speed label" msgid "Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed description" msgid "Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_print label" msgid "Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_print description" msgid "The speed at which printing happens." msgstr "" #: fdmprinter.def.json msgctxt "speed_infill label" msgid "Infill Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_infill description" msgid "The speed at which infill is printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_wall label" msgid "Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_wall description" msgid "The speed at which the walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_0 label" msgid "Outer Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_0 description" msgid "" "The speed at which the outermost walls are printed. Printing the outer wall " "at a lower speed improves the final skin quality. However, having a large " "difference between the inner wall speed and the outer wall speed will affect " "quality in a negative way." msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_x label" msgid "Inner Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_wall_x description" msgid "" "The speed at which all inner walls are printed. Printing the inner wall " "faster than the outer wall will reduce printing time. It works well to set " "this in between the outer wall speed and the infill speed." msgstr "" #: fdmprinter.def.json msgctxt "speed_roofing label" msgid "Top Surface Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_roofing description" msgid "The speed at which top surface skin layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_topbottom label" msgid "Top/Bottom Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_topbottom description" msgid "The speed at which top/bottom layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "speed_support label" msgid "Support Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support description" msgid "" "The speed at which the support structure is printed. Printing support at " "higher speeds can greatly reduce printing time. The surface quality of the " "support structure is not important since it is removed after printing." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_infill label" msgid "Support Infill Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_infill description" msgid "" "The speed at which the infill of support is printed. Printing the infill at " "lower speeds improves stability." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_interface label" msgid "Support Interface Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_interface description" msgid "" "The speed at which the roofs and floors of support are printed. Printing " "them at lower speeds can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_roof label" msgid "Support Roof Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_roof description" msgid "" "The speed at which the roofs of support are printed. Printing them at lower " "speeds can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "speed_support_bottom label" msgid "Support Floor Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_support_bottom description" msgid "" "The speed at which the floor of support is printed. Printing it at lower " "speed can improve adhesion of support on top of your model." msgstr "" #: fdmprinter.def.json msgctxt "speed_prime_tower label" msgid "Prime Tower Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_prime_tower description" msgid "" "The speed at which the prime tower is printed. Printing the prime tower " "slower can make it more stable when the adhesion between the different " "filaments is suboptimal." msgstr "" #: fdmprinter.def.json msgctxt "speed_travel label" msgid "Travel Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_travel description" msgid "The speed at which travel moves are made." msgstr "" #: fdmprinter.def.json msgctxt "speed_layer_0 label" msgid "Initial Layer Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_layer_0 description" msgid "" "The speed for the initial layer. A lower value is advised to improve " "adhesion to the build plate." msgstr "" #: fdmprinter.def.json msgctxt "speed_print_layer_0 label" msgid "Initial Layer Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_print_layer_0 description" msgid "" "The speed of printing for the initial layer. A lower value is advised to " "improve adhesion to the build plate." msgstr "" #: fdmprinter.def.json msgctxt "speed_travel_layer_0 label" msgid "Initial Layer Travel Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_travel_layer_0 description" msgid "" "The speed of travel moves in the initial layer. A lower value is advised to " "prevent pulling previously printed parts away from the build plate. The " "value of this setting can automatically be calculated from the ratio between " "the Travel Speed and the Print Speed." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_speed label" msgid "Skirt/Brim Speed" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_speed description" msgid "" "The speed at which the skirt and brim are printed. Normally this is done at " "the initial layer speed, but sometimes you might want to print the skirt or " "brim at a different speed." msgstr "" #: fdmprinter.def.json msgctxt "speed_z_hop label" msgid "Z Hop Speed" msgstr "" #: fdmprinter.def.json msgctxt "speed_z_hop description" msgid "" "The speed at which the vertical Z movement is made for Z Hops. This is " "typically lower than the print speed since the build plate or machine's " "gantry is harder to move." msgstr "" #: fdmprinter.def.json msgctxt "speed_slowdown_layers label" msgid "Number of Slower Layers" msgstr "" #: fdmprinter.def.json msgctxt "speed_slowdown_layers description" msgid "" "The first few layers are printed slower than the rest of the model, to get " "better adhesion to the build plate and improve the overall success rate of " "prints. The speed is gradually increased over these layers." msgstr "" #: fdmprinter.def.json msgctxt "speed_equalize_flow_enabled label" msgid "Equalize Filament Flow" msgstr "" #: fdmprinter.def.json msgctxt "speed_equalize_flow_enabled description" msgid "" "Print thinner than normal lines faster so that the amount of material " "extruded per second remains the same. Thin pieces in your model might " "require lines printed with smaller line width than provided in the settings. " "This setting controls the speed changes for such lines." msgstr "" #: fdmprinter.def.json msgctxt "speed_equalize_flow_max label" msgid "Maximum Speed for Flow Equalization" msgstr "" #: fdmprinter.def.json msgctxt "speed_equalize_flow_max description" msgid "" "Maximum print speed when adjusting the print speed in order to equalize flow." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_enabled label" msgid "Enable Acceleration Control" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_enabled description" msgid "" "Enables adjusting the print head acceleration. Increasing the accelerations " "can reduce printing time at the cost of print quality." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print label" msgid "Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print description" msgid "The acceleration with which printing happens." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_infill label" msgid "Infill Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_infill description" msgid "The acceleration with which infill is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall label" msgid "Wall Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall description" msgid "The acceleration with which the walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_0 label" msgid "Outer Wall Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_0 description" msgid "The acceleration with which the outermost walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_x label" msgid "Inner Wall Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_wall_x description" msgid "The acceleration with which all inner walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_roofing label" msgid "Top Surface Skin Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_roofing description" msgid "The acceleration with which top surface skin layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_topbottom label" msgid "Top/Bottom Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_topbottom description" msgid "The acceleration with which top/bottom layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support label" msgid "Support Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support description" msgid "The acceleration with which the support structure is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_infill label" msgid "Support Infill Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_infill description" msgid "The acceleration with which the infill of support is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_interface label" msgid "Support Interface Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_interface description" msgid "" "The acceleration with which the roofs and floors of support are printed. " "Printing them at lower acceleration can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_roof label" msgid "Support Roof Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_roof description" msgid "" "The acceleration with which the roofs of support are printed. Printing them " "at lower acceleration can improve overhang quality." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_bottom label" msgid "Support Floor Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_support_bottom description" msgid "" "The acceleration with which the floors of support are printed. Printing them " "at lower acceleration can improve adhesion of support on top of your model." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_prime_tower label" msgid "Prime Tower Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_prime_tower description" msgid "The acceleration with which the prime tower is printed." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel label" msgid "Travel Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel description" msgid "The acceleration with which travel moves are made." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_layer_0 label" msgid "Initial Layer Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_layer_0 description" msgid "The acceleration for the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print_layer_0 label" msgid "Initial Layer Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_print_layer_0 description" msgid "The acceleration during the printing of the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel_layer_0 label" msgid "Initial Layer Travel Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_travel_layer_0 description" msgid "The acceleration for travel moves in the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "acceleration_skirt_brim label" msgid "Skirt/Brim Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "acceleration_skirt_brim description" msgid "" "The acceleration with which the skirt and brim are printed. Normally this is " "done with the initial layer acceleration, but sometimes you might want to " "print the skirt or brim at a different acceleration." msgstr "" #: fdmprinter.def.json msgctxt "jerk_enabled label" msgid "Enable Jerk Control" msgstr "" #: fdmprinter.def.json msgctxt "jerk_enabled description" msgid "" "Enables adjusting the jerk of print head when the velocity in the X or Y " "axis changes. Increasing the jerk can reduce printing time at the cost of " "print quality." msgstr "" #: fdmprinter.def.json msgctxt "jerk_print label" msgid "Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_print description" msgid "The maximum instantaneous velocity change of the print head." msgstr "" #: fdmprinter.def.json msgctxt "jerk_infill label" msgid "Infill Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_infill description" msgid "The maximum instantaneous velocity change with which infill is printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall label" msgid "Wall Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall description" msgid "" "The maximum instantaneous velocity change with which the walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_0 label" msgid "Outer Wall Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_0 description" msgid "" "The maximum instantaneous velocity change with which the outermost walls are " "printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_x label" msgid "Inner Wall Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_wall_x description" msgid "" "The maximum instantaneous velocity change with which all inner walls are " "printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_roofing label" msgid "Top Surface Skin Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_roofing description" msgid "" "The maximum instantaneous velocity change with which top surface skin layers " "are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_topbottom label" msgid "Top/Bottom Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_topbottom description" msgid "" "The maximum instantaneous velocity change with which top/bottom layers are " "printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support label" msgid "Support Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support description" msgid "" "The maximum instantaneous velocity change with which the support structure " "is printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_infill label" msgid "Support Infill Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_infill description" msgid "" "The maximum instantaneous velocity change with which the infill of support " "is printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_interface label" msgid "Support Interface Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_interface description" msgid "" "The maximum instantaneous velocity change with which the roofs and floors of " "support are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_roof label" msgid "Support Roof Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_roof description" msgid "" "The maximum instantaneous velocity change with which the roofs of support " "are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_bottom label" msgid "Support Floor Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_support_bottom description" msgid "" "The maximum instantaneous velocity change with which the floors of support " "are printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_prime_tower label" msgid "Prime Tower Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_prime_tower description" msgid "" "The maximum instantaneous velocity change with which the prime tower is " "printed." msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel label" msgid "Travel Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel description" msgid "" "The maximum instantaneous velocity change with which travel moves are made." msgstr "" #: fdmprinter.def.json msgctxt "jerk_layer_0 label" msgid "Initial Layer Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_layer_0 description" msgid "The print maximum instantaneous velocity change for the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "jerk_print_layer_0 label" msgid "Initial Layer Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_print_layer_0 description" msgid "" "The maximum instantaneous velocity change during the printing of the initial " "layer." msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel_layer_0 label" msgid "Initial Layer Travel Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_travel_layer_0 description" msgid "The acceleration for travel moves in the initial layer." msgstr "" #: fdmprinter.def.json msgctxt "jerk_skirt_brim label" msgid "Skirt/Brim Jerk" msgstr "" #: fdmprinter.def.json msgctxt "jerk_skirt_brim description" msgid "" "The maximum instantaneous velocity change with which the skirt and brim are " "printed." msgstr "" #: fdmprinter.def.json msgctxt "travel label" msgid "Travel" msgstr "" #: fdmprinter.def.json msgctxt "travel description" msgid "travel" msgstr "" #: fdmprinter.def.json msgctxt "retraction_enable label" msgid "Enable Retraction" msgstr "" #: fdmprinter.def.json msgctxt "retraction_enable description" msgid "Retract the filament when the nozzle is moving over a non-printed area." msgstr "" #: fdmprinter.def.json msgctxt "retract_at_layer_change label" msgid "Retract at Layer Change" msgstr "" #: fdmprinter.def.json msgctxt "retract_at_layer_change description" msgid "Retract the filament when the nozzle is moving to the next layer." msgstr "" #: fdmprinter.def.json msgctxt "retraction_amount label" msgid "Retraction Distance" msgstr "" #: fdmprinter.def.json msgctxt "retraction_amount description" msgid "The length of material retracted during a retraction move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_speed label" msgid "Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "retraction_speed description" msgid "" "The speed at which the filament is retracted and primed during a retraction " "move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_retract_speed label" msgid "Retraction Retract Speed" msgstr "" #: fdmprinter.def.json msgctxt "retraction_retract_speed description" msgid "The speed at which the filament is retracted during a retraction move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_prime_speed label" msgid "Retraction Prime Speed" msgstr "" #: fdmprinter.def.json msgctxt "retraction_prime_speed description" msgid "The speed at which the filament is primed during a retraction move." msgstr "" #: fdmprinter.def.json msgctxt "retraction_extra_prime_amount label" msgid "Retraction Extra Prime Amount" msgstr "" #: fdmprinter.def.json msgctxt "retraction_extra_prime_amount description" msgid "" "Some material can ooze away during a travel move, which can be compensated " "for here." msgstr "" #: fdmprinter.def.json msgctxt "retraction_min_travel label" msgid "Retraction Minimum Travel" msgstr "" #: fdmprinter.def.json msgctxt "retraction_min_travel description" msgid "" "The minimum distance of travel needed for a retraction to happen at all. " "This helps to get fewer retractions in a small area." msgstr "" #: fdmprinter.def.json msgctxt "retraction_count_max label" msgid "Maximum Retraction Count" msgstr "" #: fdmprinter.def.json msgctxt "retraction_count_max description" msgid "" "This setting limits the number of retractions occurring within the minimum " "extrusion distance window. Further retractions within this window will be " "ignored. This avoids retracting repeatedly on the same piece of filament, as " "that can flatten the filament and cause grinding issues." msgstr "" #: fdmprinter.def.json msgctxt "retraction_extrusion_window label" msgid "Minimum Extrusion Distance Window" msgstr "" #: fdmprinter.def.json msgctxt "retraction_extrusion_window description" msgid "" "The window in which the maximum retraction count is enforced. This value " "should be approximately the same as the retraction distance, so that " "effectively the number of times a retraction passes the same patch of " "material is limited." msgstr "" #: fdmprinter.def.json msgctxt "limit_support_retractions label" msgid "Limit Support Retractions" msgstr "" #: fdmprinter.def.json msgctxt "limit_support_retractions description" msgid "" "Omit retraction when moving from support to support in a straight line. " "Enabling this setting saves print time, but can lead to excessive stringing " "within the support structure." msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing label" msgid "Combing Mode" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing description" msgid "" "Combing keeps the nozzle within already printed areas when traveling. This " "results in slightly longer travel moves but reduces the need for " "retractions. If combing is off, the material will retract and the nozzle " "moves in a straight line to the next point. It is also possible to avoid " "combing over top/bottom skin areas or to only comb within the infill." msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option off" msgid "Off" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option all" msgid "All" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option noskin" msgid "Not in Skin" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing option infill" msgid "Within Infill" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing_max_distance label" msgid "Max Comb Distance With No Retract" msgstr "" #: fdmprinter.def.json msgctxt "retraction_combing_max_distance description" msgid "" "When non-zero, combing travel moves that are longer than this distance will " "use retraction." msgstr "" #: fdmprinter.def.json msgctxt "travel_retract_before_outer_wall label" msgid "Retract Before Outer Wall" msgstr "" #: fdmprinter.def.json msgctxt "travel_retract_before_outer_wall description" msgid "Always retract when moving to start an outer wall." msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_other_parts label" msgid "Avoid Printed Parts When Traveling" msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_other_parts description" msgid "" "The nozzle avoids already printed parts when traveling. This option is only " "available when combing is enabled." msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_supports label" msgid "Avoid Supports When Traveling" msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_supports description" msgid "" "The nozzle avoids already printed supports when traveling. This option is " "only available when combing is enabled." msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_distance label" msgid "Travel Avoid Distance" msgstr "" #: fdmprinter.def.json msgctxt "travel_avoid_distance description" msgid "" "The distance between the nozzle and already printed parts when avoiding " "during travel moves." msgstr "" #: fdmprinter.def.json msgctxt "layer_start_x label" msgid "Layer Start X" msgstr "" #: fdmprinter.def.json msgctxt "layer_start_x description" msgid "" "The X coordinate of the position near where to find the part to start " "printing each layer." msgstr "" #: fdmprinter.def.json msgctxt "layer_start_y label" msgid "Layer Start Y" msgstr "" #: fdmprinter.def.json msgctxt "layer_start_y description" msgid "" "The Y coordinate of the position near where to find the part to start " "printing each layer." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_enabled label" msgid "Z Hop When Retracted" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_enabled description" msgid "" "Whenever a retraction is done, the build plate is lowered to create " "clearance between the nozzle and the print. It prevents the nozzle from " "hitting the print during travel moves, reducing the chance to knock the " "print from the build plate." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_only_when_collides label" msgid "Z Hop Only Over Printed Parts" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_only_when_collides description" msgid "" "Only perform a Z Hop when moving over printed parts which cannot be avoided " "by horizontal motion by Avoid Printed Parts when Traveling." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop label" msgid "Z Hop Height" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop description" msgid "The height difference when performing a Z Hop." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch label" msgid "Z Hop After Extruder Switch" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch description" msgid "" "After the machine switched from one extruder to the other, the build plate " "is lowered to create clearance between the nozzle and the print. This " "prevents the nozzle from leaving oozed material on the outside of a print." msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch_height label" msgid "Z Hop After Extruder Switch Height" msgstr "" #: fdmprinter.def.json msgctxt "retraction_hop_after_extruder_switch_height description" msgid "The height difference when performing a Z Hop after extruder switch." msgstr "" #: fdmprinter.def.json msgctxt "cooling label" msgid "Cooling" msgstr "" #: fdmprinter.def.json msgctxt "cooling description" msgid "Cooling" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_enabled label" msgid "Enable Print Cooling" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_enabled description" msgid "" "Enables the print cooling fans while printing. The fans improve print " "quality on layers with short layer times and bridging / overhangs." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed label" msgid "Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed description" msgid "The speed at which the print cooling fans spin." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_min label" msgid "Regular Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_min description" msgid "" "The speed at which the fans spin before hitting the threshold. When a layer " "prints faster than the threshold, the fan speed gradually inclines towards " "the maximum fan speed." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_max label" msgid "Maximum Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_max description" msgid "" "The speed at which the fans spin on the minimum layer time. The fan speed " "gradually increases between the regular fan speed and maximum fan speed when " "the threshold is hit." msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time_fan_speed_max label" msgid "Regular/Maximum Fan Speed Threshold" msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time_fan_speed_max description" msgid "" "The layer time which sets the threshold between regular fan speed and " "maximum fan speed. Layers that print slower than this time use regular fan " "speed. For faster layers the fan speed gradually increases towards the " "maximum fan speed." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_0 label" msgid "Initial Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_speed_0 description" msgid "" "The speed at which the fans spin at the start of the print. In subsequent " "layers the fan speed is gradually increased up to the layer corresponding to " "Regular Fan Speed at Height." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_at_height label" msgid "Regular Fan Speed at Height" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_at_height description" msgid "" "The height at which the fans spin on regular fan speed. At the layers below " "the fan speed gradually increases from Initial Fan Speed to Regular Fan " "Speed." msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_layer label" msgid "Regular Fan Speed at Layer" msgstr "" #: fdmprinter.def.json msgctxt "cool_fan_full_layer description" msgid "" "The layer at which the fans spin on regular fan speed. If regular fan speed " "at height is set, this value is calculated and rounded to a whole number." msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time label" msgid "Minimum Layer Time" msgstr "" #: fdmprinter.def.json msgctxt "cool_min_layer_time description" msgid "" "The minimum time spent in a layer. This forces the printer to slow down, to " "at least spend the time set here in one layer. This allows the printed " "material to cool down properly before printing the next layer. Layers may " "still take shorter than the minimal layer time if Lift Head is disabled and " "if the Minimum Speed would otherwise be violated." msgstr "" #: fdmprinter.def.json msgctxt "cool_min_speed label" msgid "Minimum Speed" msgstr "" #: fdmprinter.def.json msgctxt "cool_min_speed description" msgid "" "The minimum print speed, despite slowing down due to the minimum layer time. " "When the printer would slow down too much, the pressure in the nozzle would " "be too low and result in bad print quality." msgstr "" #: fdmprinter.def.json msgctxt "cool_lift_head label" msgid "Lift Head" msgstr "" #: fdmprinter.def.json msgctxt "cool_lift_head description" msgid "" "When the minimum speed is hit because of minimum layer time, lift the head " "away from the print and wait the extra time until the minimum layer time is " "reached." msgstr "" #: fdmprinter.def.json msgctxt "support label" msgid "Support" msgstr "" #: fdmprinter.def.json msgctxt "support description" msgid "Support" msgstr "" #: fdmprinter.def.json msgctxt "support_enable label" msgid "Generate Support" msgstr "" #: fdmprinter.def.json msgctxt "support_enable description" msgid "" "Generate structures to support parts of the model which have overhangs. " "Without these structures, such parts would collapse during printing." msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr label" msgid "Support Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr description" msgid "" "The extruder train to use for printing the support. This is used in multi-" "extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_extruder_nr label" msgid "Support Infill Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_extruder_nr description" msgid "" "The extruder train to use for printing the infill of the support. This is " "used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr_layer_0 label" msgid "First Layer Support Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_extruder_nr_layer_0 description" msgid "" "The extruder train to use for printing the first layer of support infill. " "This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_extruder_nr label" msgid "Support Interface Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_extruder_nr description" msgid "" "The extruder train to use for printing the roofs and floors of the support. " "This is used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_extruder_nr label" msgid "Support Roof Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_extruder_nr description" msgid "" "The extruder train to use for printing the roofs of the support. This is " "used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_extruder_nr label" msgid "Support Floor Extruder" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_extruder_nr description" msgid "" "The extruder train to use for printing the floors of the support. This is " "used in multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "support_structure label" msgid "Support Structure" msgstr "" #: fdmprinter.def.json msgctxt "support_structure description" msgid "" "Chooses between the techniques available to generate support. \"Normal\" " "support creates a support structure directly below the overhanging parts and " "drops those areas straight down. \"Tree\" support creates branches towards " "the overhanging areas that support the model on the tips of those branches, " "and allows the branches to crawl around the model to support it from the " "build plate as much as possible." msgstr "" #: fdmprinter.def.json msgctxt "support_structure option normal" msgid "Normal" msgstr "" #: fdmprinter.def.json msgctxt "support_structure option tree" msgid "Tree" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_angle label" msgid "Tree Support Branch Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_angle description" msgid "" "The angle of the branches. Use a lower angle to make them more vertical and " "more stable. Use a higher angle to be able to have more reach." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_distance label" msgid "Tree Support Branch Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_distance description" msgid "" "How far apart the branches need to be when they touch the model. Making this " "distance small will cause the tree support to touch the model at more " "points, causing better overhang but making support harder to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter label" msgid "Tree Support Branch Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter description" msgid "" "The diameter of the thinnest branches of tree support. Thicker branches are " "more sturdy. Branches towards the base will be thicker than this." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter_angle label" msgid "Tree Support Branch Diameter Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter_angle description" msgid "" "The angle of the branches' diameter as they gradually become thicker towards " "the bottom. An angle of 0 will cause the branches to have uniform thickness " "over their length. A bit of an angle can increase stability of the tree " "support." msgstr "" #: fdmprinter.def.json msgctxt "support_tree_collision_resolution label" msgid "Tree Support Collision Resolution" msgstr "" #: fdmprinter.def.json msgctxt "support_tree_collision_resolution description" msgid "" "Resolution to compute collisions with to avoid hitting the model. Setting " "this lower will produce more accurate trees that fail less often, but " "increases slicing time dramatically." msgstr "" #: fdmprinter.def.json msgctxt "support_type label" msgid "Support Placement" msgstr "" #: fdmprinter.def.json msgctxt "support_type description" msgid "" "Adjusts the placement of the support structures. The placement can be set to " "touching build plate or everywhere. When set to everywhere the support " "structures will also be printed on the model." msgstr "" #: fdmprinter.def.json msgctxt "support_type option buildplate" msgid "Touching Buildplate" msgstr "" #: fdmprinter.def.json msgctxt "support_type option everywhere" msgid "Everywhere" msgstr "" #: fdmprinter.def.json msgctxt "support_angle label" msgid "Support Overhang Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_angle description" msgid "" "The minimum angle of overhangs for which support is added. At a value of 0° " "all overhangs are supported, 90° will not provide any support." msgstr "" #: fdmprinter.def.json msgctxt "support_pattern label" msgid "Support Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern description" msgid "" "The pattern of the support structures of the print. The different options " "available result in sturdy or easy to remove support." msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" msgstr "" #: fdmprinter.def.json msgctxt "support_pattern option gyroid" msgid "Gyroid" msgstr "" #: fdmprinter.def.json msgctxt "support_wall_count label" msgid "Support Wall Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_wall_count description" msgid "" "The number of walls with which to surround support infill. Adding a wall can " "make support print more reliably and can support overhangs better, but " "increases print time and material used." msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_support label" msgid "Connect Support Lines" msgstr "" #: fdmprinter.def.json msgctxt "zig_zaggify_support description" msgid "" "Connect the ends of the support lines together. Enabling this setting can " "make your support more sturdy and reduce underextrusion, but it will cost " "more material." msgstr "" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" msgid "Connect Support ZigZags" msgstr "" #: fdmprinter.def.json msgctxt "support_connect_zigzags description" msgid "" "Connect the ZigZags. This will increase the strength of the zig zag support " "structure." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_rate label" msgid "Support Density" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_rate description" msgid "" "Adjusts the density of the support structure. A higher value results in " "better overhangs, but the supports are harder to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_line_distance label" msgid "Support Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_line_distance description" msgid "" "Distance between the printed support structure lines. This setting is " "calculated by the support density." msgstr "" #: fdmprinter.def.json msgctxt "support_initial_layer_line_distance label" msgid "Initial Layer Support Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_initial_layer_line_distance description" msgid "" "Distance between the printed initial layer support structure lines. This " "setting is calculated by the support density." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_angles label" msgid "Support Infill Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_angles description" msgid "" "A list of integer line directions to use. Elements from the list are used " "sequentially as the layers progress and when the end of the list is reached, " "it starts at the beginning again. The list items are separated by commas and " "the whole list is contained in square brackets. Default is an empty list " "which means use the default angle 0 degrees." msgstr "" #: fdmprinter.def.json msgctxt "support_brim_enable label" msgid "Enable Support Brim" msgstr "" #: fdmprinter.def.json msgctxt "support_brim_enable description" msgid "" "Generate a brim within the support infill regions of the first layer. This " "brim is printed underneath the support, not around it. Enabling this setting " "increases the adhesion of support to the build plate." msgstr "" #: fdmprinter.def.json msgctxt "support_brim_width label" msgid "Support Brim Width" msgstr "" #: fdmprinter.def.json msgctxt "support_brim_width description" msgid "" "The width of the brim to print underneath the support. A larger brim " "enhances adhesion to the build plate, at the cost of some extra material." msgstr "" #: fdmprinter.def.json msgctxt "support_brim_line_count label" msgid "Support Brim Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_brim_line_count description" msgid "" "The number of lines used for the support brim. More brim lines enhance " "adhesion to the build plate, at the cost of some extra material." msgstr "" #: fdmprinter.def.json msgctxt "support_z_distance label" msgid "Support Z Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_z_distance description" msgid "" "Distance from the top/bottom of the support structure to the print. This gap " "provides clearance to remove the supports after the model is printed. This " "value is rounded up to a multiple of the layer height." msgstr "" #: fdmprinter.def.json msgctxt "support_top_distance label" msgid "Support Top Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_top_distance description" msgid "Distance from the top of the support to the print." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_distance label" msgid "Support Bottom Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_distance description" msgid "Distance from the print to the bottom of the support." msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance label" msgid "Support X/Y Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance description" msgid "Distance of the support structure from the print in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z label" msgid "Support Distance Priority" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z description" msgid "" "Whether the Support X/Y Distance overrides the Support Z Distance or vice " "versa. When X/Y overrides Z the X/Y distance can push away the support from " "the model, influencing the actual Z distance to the overhang. We can disable " "this by not applying the X/Y distance around overhangs." msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z option xy_overrides_z" msgid "X/Y overrides Z" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_overrides_z option z_overrides_xy" msgid "Z overrides X/Y" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance_overhang label" msgid "Minimum Support X/Y Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_xy_distance_overhang description" msgid "" "Distance of the support structure from the overhang in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_height label" msgid "Support Stair Step Height" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_height description" msgid "" "The height of the steps of the stair-like bottom of support resting on the " "model. A low value makes the support harder to remove, but too high values " "can lead to unstable support structures. Set to zero to turn off the stair-" "like behaviour." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_width label" msgid "Support Stair Step Maximum Width" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_width description" msgid "" "The maximum width of the steps of the stair-like bottom of support resting " "on the model. A low value makes the support harder to remove, but too high " "values can lead to unstable support structures." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_min_slope label" msgid "Support Stair Step Minimum Slope Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_stair_step_min_slope description" msgid "" "The minimum slope of the area for stair-stepping to take effect. Low values " "should make support easier to remove on shallower slopes, but really low " "values may result in some very counter-intuitive results on other parts of " "the model." msgstr "" #: fdmprinter.def.json msgctxt "support_join_distance label" msgid "Support Join Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_join_distance description" msgid "" "The maximum distance between support structures in the X/Y directions. When " "separate structures are closer together than this value, the structures " "merge into one." msgstr "" #: fdmprinter.def.json msgctxt "support_offset label" msgid "Support Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_offset description" msgid "" "Amount of offset applied to all support polygons in each layer. Positive " "values can smooth out the support areas and result in more sturdy support." msgstr "" #: fdmprinter.def.json msgctxt "support_infill_sparse_thickness label" msgid "Support Infill Layer Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_infill_sparse_thickness description" msgid "" "The thickness per layer of support infill material. This value should always " "be a multiple of the layer height and is otherwise rounded." msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_steps label" msgid "Gradual Support Infill Steps" msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_steps description" msgid "" "Number of times to reduce the support infill density by half when getting " "further below top surfaces. Areas which are closer to top surfaces get a " "higher density, up to the Support Infill Density." msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_step_height label" msgid "Gradual Support Infill Step Height" msgstr "" #: fdmprinter.def.json msgctxt "gradual_support_infill_step_height description" msgid "" "The height of support infill of a given density before switching to half the " "density." msgstr "" #: fdmprinter.def.json msgctxt "minimum_support_area label" msgid "Minimum Support Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_support_area description" msgid "" "Minimum area size for support polygons. Polygons which have an area smaller " "than this value will not be generated." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_enable label" msgid "Enable Support Interface" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_enable description" msgid "" "Generate a dense interface between the model and the support. This will " "create a skin at the top of the support on which the model is printed and at " "the bottom of the support, where it rests on the model." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_enable label" msgid "Enable Support Roof" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_enable description" msgid "" "Generate a dense slab of material between the top of support and the model. " "This will create a skin between the model and support." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_enable label" msgid "Enable Support Floor" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_enable description" msgid "" "Generate a dense slab of material between the bottom of the support and the " "model. This will create a skin between the model and support." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_height label" msgid "Support Interface Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_height description" msgid "" "The thickness of the interface of the support where it touches with the " "model on the bottom or the top." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_height label" msgid "Support Roof Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_height description" msgid "" "The thickness of the support roofs. This controls the amount of dense layers " "at the top of the support on which the model rests." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_height label" msgid "Support Floor Thickness" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_height description" msgid "" "The thickness of the support floors. This controls the number of dense " "layers that are printed on top of places of a model on which support rests." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_skip_height label" msgid "Support Interface Resolution" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_skip_height description" msgid "" "When checking where there's model above and below the support, take steps of " "the given height. Lower values will slice slower, while higher values may " "cause normal support to be printed in some places where there should have " "been support interface." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_density label" msgid "Support Interface Density" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_density description" msgid "" "Adjusts the density of the roofs and floors of the support structure. A " "higher value results in better overhangs, but the supports are harder to " "remove." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_density label" msgid "Support Roof Density" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_density description" msgid "" "The density of the roofs of the support structure. A higher value results in " "better overhangs, but the supports are harder to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_distance label" msgid "Support Roof Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_line_distance description" msgid "" "Distance between the printed support roof lines. This setting is calculated " "by the Support Roof Density, but can be adjusted separately." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_density label" msgid "Support Floor Density" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_density description" msgid "" "The density of the floors of the support structure. A higher value results " "in better adhesion of the support on top of the model." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_distance label" msgid "Support Floor Line Distance" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_line_distance description" msgid "" "Distance between the printed support floor lines. This setting is calculated " "by the Support Floor Density, but can be adjusted separately." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern label" msgid "Support Interface Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern description" msgid "" "The pattern with which the interface of the support with the model is " "printed." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern label" msgid "Support Roof Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern description" msgid "The pattern with which the roofs of the support are printed." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern label" msgid "Support Floor Pattern" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern description" msgid "The pattern with which the floors of the support are printed." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option grid" msgid "Grid" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option triangles" msgid "Triangles" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "minimum_interface_area label" msgid "Minimum Support Interface Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_interface_area description" msgid "" "Minimum area size for support interface polygons. Polygons which have an " "area smaller than this value will be printed as normal support." msgstr "" #: fdmprinter.def.json msgctxt "minimum_roof_area label" msgid "Minimum Support Roof Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_roof_area description" msgid "" "Minimum area size for the roofs of the support. Polygons which have an area " "smaller than this value will be printed as normal support." msgstr "" #: fdmprinter.def.json msgctxt "minimum_bottom_area label" msgid "Minimum Support Floor Area" msgstr "" #: fdmprinter.def.json msgctxt "minimum_bottom_area description" msgid "" "Minimum area size for the floors of the support. Polygons which have an area " "smaller than this value will be printed as normal support." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_offset label" msgid "Support Interface Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_offset description" msgid "Amount of offset applied to the support interface polygons." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_offset label" msgid "Support Roof Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_offset description" msgid "Amount of offset applied to the roofs of the support." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_offset label" msgid "Support Floor Horizontal Expansion" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_offset description" msgid "Amount of offset applied to the floors of the support." msgstr "" #: fdmprinter.def.json msgctxt "support_interface_angles label" msgid "Support Interface Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_interface_angles description" msgid "" "A list of integer line directions to use. Elements from the list are used " "sequentially as the layers progress and when the end of the list is reached, " "it starts at the beginning again. The list items are separated by commas and " "the whole list is contained in square brackets. Default is an empty list " "which means use the default angles (alternates between 45 and 135 degrees if " "interfaces are quite thick or 90 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "support_roof_angles label" msgid "Support Roof Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_roof_angles description" msgid "" "A list of integer line directions to use. Elements from the list are used " "sequentially as the layers progress and when the end of the list is reached, " "it starts at the beginning again. The list items are separated by commas and " "the whole list is contained in square brackets. Default is an empty list " "which means use the default angles (alternates between 45 and 135 degrees if " "interfaces are quite thick or 90 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_angles label" msgid "Support Floor Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "support_bottom_angles description" msgid "" "A list of integer line directions to use. Elements from the list are used " "sequentially as the layers progress and when the end of the list is reached, " "it starts at the beginning again. The list items are separated by commas and " "the whole list is contained in square brackets. Default is an empty list " "which means use the default angles (alternates between 45 and 135 degrees if " "interfaces are quite thick or 90 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "support_fan_enable label" msgid "Fan Speed Override" msgstr "" #: fdmprinter.def.json msgctxt "support_fan_enable description" msgid "" "When enabled, the print cooling fan speed is altered for the skin regions " "immediately above the support." msgstr "" #: fdmprinter.def.json msgctxt "support_supported_skin_fan_speed label" msgid "Supported Skin Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "support_supported_skin_fan_speed description" msgid "" "Percentage fan speed to use when printing the skin regions immediately above " "the support. Using a high fan speed can make the support easier to remove." msgstr "" #: fdmprinter.def.json msgctxt "support_use_towers label" msgid "Use Towers" msgstr "" #: fdmprinter.def.json msgctxt "support_use_towers description" msgid "" "Use specialized towers to support tiny overhang areas. These towers have a " "larger diameter than the region they support. Near the overhang the towers' " "diameter decreases, forming a roof." msgstr "" #: fdmprinter.def.json msgctxt "support_tower_diameter label" msgid "Tower Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tower_diameter description" msgid "The diameter of a special tower." msgstr "" #: fdmprinter.def.json msgctxt "support_tower_maximum_supported_diameter label" msgid "Maximum Tower-Supported Diameter" msgstr "" #: fdmprinter.def.json msgctxt "support_tower_maximum_supported_diameter description" msgid "" "Maximum diameter in the X/Y directions of a small area which is to be " "supported by a specialized support tower." msgstr "" #: fdmprinter.def.json msgctxt "support_tower_roof_angle label" msgid "Tower Roof Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_tower_roof_angle description" msgid "" "The angle of a rooftop of a tower. A higher value results in pointed tower " "roofs, a lower value results in flattened tower roofs." msgstr "" #: fdmprinter.def.json msgctxt "support_mesh_drop_down label" msgid "Drop Down Support Mesh" msgstr "" #: fdmprinter.def.json msgctxt "support_mesh_drop_down description" msgid "" "Make support everywhere below the support mesh, so that there's no overhang " "in the support mesh." msgstr "" #: fdmprinter.def.json msgctxt "support_meshes_present label" msgid "Scene Has Support Meshes" msgstr "" #: fdmprinter.def.json msgctxt "support_meshes_present description" msgid "" "There are support meshes present in the scene. This setting is controlled by " "Cura." msgstr "" #: fdmprinter.def.json msgctxt "platform_adhesion label" msgid "Build Plate Adhesion" msgstr "" #: fdmprinter.def.json msgctxt "platform_adhesion description" msgid "Adhesion" msgstr "" #: fdmprinter.def.json msgctxt "prime_blob_enable label" msgid "Enable Prime Blob" msgstr "" #: fdmprinter.def.json msgctxt "prime_blob_enable description" msgid "" "Whether to prime the filament with a blob before printing. Turning this " "setting on will ensure that the extruder will have material ready at the " "nozzle before printing. Printing Brim or Skirt can act like priming too, in " "which case turning this setting off saves some time." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_x label" msgid "Extruder Prime X Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_x description" msgid "" "The X coordinate of the position where the nozzle primes at the start of " "printing." msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_y label" msgid "Extruder Prime Y Position" msgstr "" #: fdmprinter.def.json msgctxt "extruder_prime_pos_y description" msgid "" "The Y coordinate of the position where the nozzle primes at the start of " "printing." msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type label" msgid "Build Plate Adhesion Type" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type description" msgid "" "Different options that help to improve both priming your extrusion and " "adhesion to the build plate. Brim adds a single layer flat area around the " "base of your model to prevent warping. Raft adds a thick grid with a roof " "below the model. Skirt is a line printed around the model, but not connected " "to the model." msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option skirt" msgid "Skirt" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option brim" msgid "Brim" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option raft" msgid "Raft" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_type option none" msgid "None" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_extruder_nr label" msgid "Build Plate Adhesion Extruder" msgstr "" #: fdmprinter.def.json msgctxt "adhesion_extruder_nr description" msgid "" "The extruder train to use for printing the skirt/brim/raft. This is used in " "multi-extrusion." msgstr "" #: fdmprinter.def.json msgctxt "skirt_line_count label" msgid "Skirt Line Count" msgstr "" #: fdmprinter.def.json msgctxt "skirt_line_count description" msgid "" "Multiple skirt lines help to prime your extrusion better for small models. " "Setting this to 0 will disable the skirt." msgstr "" #: fdmprinter.def.json msgctxt "skirt_gap label" msgid "Skirt Distance" msgstr "" #: fdmprinter.def.json msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance. Multiple skirt lines will extend outwards from " "this distance." msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" msgid "Skirt/Brim Minimum Length" msgstr "" #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length description" msgid "" "The minimum length of the skirt or brim. If this length is not reached by " "all skirt or brim lines together, more skirt or brim lines will be added " "until the minimum length is reached. Note: If the line count is set to 0 " "this is ignored." msgstr "" #: fdmprinter.def.json msgctxt "brim_width label" msgid "Brim Width" msgstr "" #: fdmprinter.def.json msgctxt "brim_width description" msgid "" "The distance from the model to the outermost brim line. A larger brim " "enhances adhesion to the build plate, but also reduces the effective print " "area." msgstr "" #: fdmprinter.def.json msgctxt "brim_line_count label" msgid "Brim Line Count" msgstr "" #: fdmprinter.def.json msgctxt "brim_line_count description" msgid "" "The number of lines used for a brim. More brim lines enhance adhesion to the " "build plate, but also reduces the effective print area." msgstr "" #: fdmprinter.def.json msgctxt "brim_gap label" msgid "Brim Distance" msgstr "" #: fdmprinter.def.json msgctxt "brim_gap description" msgid "" "The horizontal distance between the first brim line and the outline of the " "first layer of the print. A small gap can make the brim easier to remove " "while still providing the thermal benefits." msgstr "" #: fdmprinter.def.json msgctxt "brim_replaces_support label" msgid "Brim Replaces Support" msgstr "" #: fdmprinter.def.json msgctxt "brim_replaces_support description" msgid "" "Enforce brim to be printed around the model even if that space would " "otherwise be occupied by support. This replaces some regions of the first " "layer of support by brim regions." msgstr "" #: fdmprinter.def.json msgctxt "brim_outside_only label" msgid "Brim Only on Outside" msgstr "" #: fdmprinter.def.json msgctxt "brim_outside_only description" msgid "" "Only print the brim on the outside of the model. This reduces the amount of " "brim you need to remove afterwards, while it doesn't reduce the bed adhesion " "that much." msgstr "" #: fdmprinter.def.json msgctxt "raft_margin label" msgid "Raft Extra Margin" msgstr "" #: fdmprinter.def.json msgctxt "raft_margin description" msgid "" "If the raft is enabled, this is the extra raft area around the model which " "is also given a raft. Increasing this margin will create a stronger raft " "while using more material and leaving less area for your print." msgstr "" #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" msgstr "" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "" "This setting controls how much inner corners in the raft outline are " "rounded. Inward corners are rounded to a semi circle with a radius equal to " "the value given here. This setting also removes holes in the raft outline " "which are smaller than such a circle." msgstr "" #: fdmprinter.def.json msgctxt "raft_airgap label" msgid "Raft Air Gap" msgstr "" #: fdmprinter.def.json msgctxt "raft_airgap description" msgid "" "The gap between the final raft layer and the first layer of the model. Only " "the first layer is raised by this amount to lower the bonding between the " "raft layer and the model. Makes it easier to peel off the raft." msgstr "" #: fdmprinter.def.json msgctxt "layer_0_z_overlap label" msgid "Initial Layer Z Overlap" msgstr "" #: fdmprinter.def.json msgctxt "layer_0_z_overlap description" msgid "" "Make the first and second layer of the model overlap in the Z direction to " "compensate for the filament lost in the airgap. All models above the first " "model layer will be shifted down by this amount." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_layers label" msgid "Raft Top Layers" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_layers description" msgid "" "The number of top layers on top of the 2nd raft layer. These are fully " "filled layers that the model sits on. 2 layers result in a smoother top " "surface than 1." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_thickness label" msgid "Raft Top Layer Thickness" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_thickness description" msgid "Layer thickness of the top raft layers." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_width label" msgid "Raft Top Line Width" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_width description" msgid "" "Width of the lines in the top surface of the raft. These can be thin lines " "so that the top of the raft becomes smooth." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_spacing label" msgid "Raft Top Spacing" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_line_spacing description" msgid "" "The distance between the raft lines for the top raft layers. The spacing " "should be equal to the line width, so that the surface is solid." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_thickness label" msgid "Raft Middle Thickness" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_thickness description" msgid "Layer thickness of the middle raft layer." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_width label" msgid "Raft Middle Line Width" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_width description" msgid "" "Width of the lines in the middle raft layer. Making the second layer extrude " "more causes the lines to stick to the build plate." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_spacing label" msgid "Raft Middle Spacing" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_line_spacing description" msgid "" "The distance between the raft lines for the middle raft layer. The spacing " "of the middle should be quite wide, while being dense enough to support the " "top raft layers." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_thickness label" msgid "Raft Base Thickness" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_thickness description" msgid "" "Layer thickness of the base raft layer. This should be a thick layer which " "sticks firmly to the printer build plate." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_width label" msgid "Raft Base Line Width" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_width description" msgid "" "Width of the lines in the base raft layer. These should be thick lines to " "assist in build plate adhesion." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_spacing label" msgid "Raft Base Line Spacing" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_line_spacing description" msgid "" "The distance between the raft lines for the base raft layer. Wide spacing " "makes for easy removal of the raft from the build plate." msgstr "" #: fdmprinter.def.json msgctxt "raft_speed label" msgid "Raft Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_speed description" msgid "The speed at which the raft is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_speed label" msgid "Raft Top Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_speed description" msgid "" "The speed at which the top raft layers are printed. These should be printed " "a bit slower, so that the nozzle can slowly smooth out adjacent surface " "lines." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_speed label" msgid "Raft Middle Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_speed description" msgid "" "The speed at which the middle raft layer is printed. This should be printed " "quite slowly, as the volume of material coming out of the nozzle is quite " "high." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_speed label" msgid "Raft Base Print Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_speed description" msgid "" "The speed at which the base raft layer is printed. This should be printed " "quite slowly, as the volume of material coming out of the nozzle is quite " "high." msgstr "" #: fdmprinter.def.json msgctxt "raft_acceleration label" msgid "Raft Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_acceleration description" msgid "The acceleration with which the raft is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_acceleration label" msgid "Raft Top Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_acceleration description" msgid "The acceleration with which the top raft layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_acceleration label" msgid "Raft Middle Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_acceleration description" msgid "The acceleration with which the middle raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_acceleration label" msgid "Raft Base Print Acceleration" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_acceleration description" msgid "The acceleration with which the base raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_jerk label" msgid "Raft Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_jerk description" msgid "The jerk with which the raft is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_jerk label" msgid "Raft Top Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_jerk description" msgid "The jerk with which the top raft layers are printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_jerk label" msgid "Raft Middle Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_jerk description" msgid "The jerk with which the middle raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_jerk label" msgid "Raft Base Print Jerk" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_jerk description" msgid "The jerk with which the base raft layer is printed." msgstr "" #: fdmprinter.def.json msgctxt "raft_fan_speed label" msgid "Raft Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_fan_speed description" msgid "The fan speed for the raft." msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_fan_speed label" msgid "Raft Top Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_surface_fan_speed description" msgid "The fan speed for the top raft layers." msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_fan_speed label" msgid "Raft Middle Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_interface_fan_speed description" msgid "The fan speed for the middle raft layer." msgstr "" #: fdmprinter.def.json msgctxt "raft_base_fan_speed label" msgid "Raft Base Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "raft_base_fan_speed description" msgid "The fan speed for the base raft layer." msgstr "" #: fdmprinter.def.json msgctxt "dual label" msgid "Dual Extrusion" msgstr "" #: fdmprinter.def.json msgctxt "dual description" msgid "Settings used for printing with multiple extruders." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_enable label" msgid "Enable Prime Tower" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_enable description" msgid "" "Print a tower next to the print which serves to prime the material after " "each nozzle switch." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_size label" msgid "Prime Tower Size" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_size description" msgid "The width of the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_min_volume label" msgid "Prime Tower Minimum Volume" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_min_volume description" msgid "" "The minimum volume for each layer of the prime tower in order to purge " "enough material." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_x label" msgid "Prime Tower X Position" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_x description" msgid "The x coordinate of the position of the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_y label" msgid "Prime Tower Y Position" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_position_y description" msgid "The y coordinate of the position of the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_wipe_enabled label" msgid "Wipe Inactive Nozzle on Prime Tower" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_wipe_enabled description" msgid "" "After printing the prime tower with one nozzle, wipe the oozed material from " "the other nozzle off on the prime tower." msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_brim_enable label" msgid "Prime Tower Brim" msgstr "" #: fdmprinter.def.json msgctxt "prime_tower_brim_enable description" msgid "" "Prime-towers might need the extra adhesion afforded by a brim even if the " "model doesn't. Presently can't be used with the 'Raft' adhesion-type." msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_enabled label" msgid "Enable Ooze Shield" msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_enabled description" msgid "" "Enable exterior ooze shield. This will create a shell around the model which " "is likely to wipe a second nozzle if it's at the same height as the first " "nozzle." msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_angle label" msgid "Ooze Shield Angle" msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_angle description" msgid "" "The maximum angle a part in the ooze shield will have. With 0 degrees being " "vertical, and 90 degrees being horizontal. A smaller angle leads to less " "failed ooze shields, but more material." msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_dist label" msgid "Ooze Shield Distance" msgstr "" #: fdmprinter.def.json msgctxt "ooze_shield_dist description" msgid "Distance of the ooze shield from the print, in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_amount label" msgid "Nozzle Switch Retraction Distance" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_amount description" msgid "" "The amount of retraction when switching extruders. Set to 0 for no " "retraction at all. This should generally be the same as the length of the " "heat zone." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speeds label" msgid "Nozzle Switch Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speeds description" msgid "" "The speed at which the filament is retracted. A higher retraction speed " "works better, but a very high retraction speed can lead to filament grinding." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speed label" msgid "Nozzle Switch Retract Speed" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_retraction_speed description" msgid "" "The speed at which the filament is retracted during a nozzle switch retract." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_prime_speed label" msgid "Nozzle Switch Prime Speed" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_prime_speed description" msgid "" "The speed at which the filament is pushed back after a nozzle switch " "retraction." msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_extra_prime_amount label" msgid "Nozzle Switch Extra Prime Amount" msgstr "" #: fdmprinter.def.json msgctxt "switch_extruder_extra_prime_amount description" msgid "Extra material to prime after nozzle switching." msgstr "" #: fdmprinter.def.json msgctxt "meshfix label" msgid "Mesh Fixes" msgstr "" #: fdmprinter.def.json msgctxt "meshfix description" msgid "Make the meshes more suited for 3D printing." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all label" msgid "Union Overlapping Volumes" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all description" msgid "" "Ignore the internal geometry arising from overlapping volumes within a mesh " "and print the volumes as one. This may cause unintended internal cavities to " "disappear." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all_remove_holes label" msgid "Remove All Holes" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_union_all_remove_holes description" msgid "" "Remove the holes in each layer and keep only the outside shape. This will " "ignore any invisible internal geometry. However, it also ignores layer holes " "which can be viewed from above or below." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_extensive_stitching label" msgid "Extensive Stitching" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_extensive_stitching description" msgid "" "Extensive stitching tries to stitch up open holes in the mesh by closing the " "hole with touching polygons. This option can introduce a lot of processing " "time." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_keep_open_polygons label" msgid "Keep Disconnected Faces" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_keep_open_polygons description" msgid "" "Normally Cura tries to stitch up small holes in the mesh and remove parts of " "a layer with big holes. Enabling this option keeps those parts which cannot " "be stitched. This option should be used as a last resort option when " "everything else fails to produce proper g-code." msgstr "" #: fdmprinter.def.json msgctxt "multiple_mesh_overlap label" msgid "Merged Meshes Overlap" msgstr "" #: fdmprinter.def.json msgctxt "multiple_mesh_overlap description" msgid "" "Make meshes which are touching each other overlap a bit. This makes them " "bond together better." msgstr "" #: fdmprinter.def.json msgctxt "carve_multiple_volumes label" msgid "Remove Mesh Intersection" msgstr "" #: fdmprinter.def.json msgctxt "carve_multiple_volumes description" msgid "" "Remove areas where multiple meshes are overlapping with each other. This may " "be used if merged dual material objects overlap with each other." msgstr "" #: fdmprinter.def.json msgctxt "alternate_carve_order label" msgid "Alternate Mesh Removal" msgstr "" #: fdmprinter.def.json msgctxt "alternate_carve_order description" msgid "" "Switch to which mesh intersecting volumes will belong with every layer, so " "that the overlapping meshes become interwoven. Turning this setting off will " "cause one of the meshes to obtain all of the volume in the overlap, while it " "is removed from the other meshes." msgstr "" #: fdmprinter.def.json msgctxt "remove_empty_first_layers label" msgid "Remove Empty First Layers" msgstr "" #: fdmprinter.def.json msgctxt "remove_empty_first_layers description" msgid "" "Remove empty layers beneath the first printed layer if they are present. " "Disabling this setting can cause empty first layers if the Slicing Tolerance " "setting is set to Exclusive or Middle." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_resolution label" msgid "Maximum Resolution" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_resolution description" msgid "" "The minimum size of a line segment after slicing. If you increase this, the " "mesh will have a lower resolution. This may allow the printer to keep up " "with the speed it has to process g-code and will increase slice speed by " "removing details of the mesh that it can't process anyway." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_travel_resolution label" msgid "Maximum Travel Resolution" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_travel_resolution description" msgid "" "The minimum size of a travel line segment after slicing. If you increase " "this, the travel moves will have less smooth corners. This may allow the " "printer to keep up with the speed it has to process g-code, but it may cause " "model avoidance to become less accurate." msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_deviation label" msgid "Maximum Deviation" msgstr "" #: fdmprinter.def.json msgctxt "meshfix_maximum_deviation description" msgid "" "The maximum deviation allowed when reducing the resolution for the Maximum " "Resolution setting. If you increase this, the print will be less accurate, " "but the g-code will be smaller. Maximum Deviation is a limit for Maximum " "Resolution, so if the two conflict the Maximum Deviation will always be held " "true." msgstr "" #: fdmprinter.def.json msgctxt "blackmagic label" msgid "Special Modes" msgstr "" #: fdmprinter.def.json msgctxt "blackmagic description" msgid "Non-traditional ways to print your models." msgstr "" #: fdmprinter.def.json msgctxt "print_sequence label" msgid "Print Sequence" msgstr "" #: fdmprinter.def.json msgctxt "print_sequence description" msgid "" "Whether to print all models one layer at a time or to wait for one model to " "finish, before moving on to the next. One at a time mode is possible if a) " "only one extruder is enabled and b) all models are separated in such a way " "that the whole print head can move in between and all models are lower than " "the distance between the nozzle and the X/Y axes." msgstr "" #: fdmprinter.def.json msgctxt "print_sequence option all_at_once" msgid "All at Once" msgstr "" #: fdmprinter.def.json msgctxt "print_sequence option one_at_a_time" msgid "One at a Time" msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh label" msgid "Infill Mesh" msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh description" msgid "" "Use this mesh to modify the infill of other meshes with which it overlaps. " "Replaces infill regions of other meshes with regions for this mesh. It's " "suggested to only print one Wall and no Top/Bottom Skin for this mesh." msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh_order label" msgid "Mesh Processing Rank" msgstr "" #: fdmprinter.def.json msgctxt "infill_mesh_order description" msgid "" "Determines the priority of this mesh when considering multiple overlapping " "infill meshes. Areas where multiple infill meshes overlap will take on the " "settings of the mesh with the lowest rank. An infill mesh with a higher " "order will modify the infill of infill meshes with lower order and normal " "meshes." msgstr "" #: fdmprinter.def.json msgctxt "cutting_mesh label" msgid "Cutting Mesh" msgstr "" #: fdmprinter.def.json msgctxt "cutting_mesh description" msgid "" "Limit the volume of this mesh to within other meshes. You can use this to " "make certain areas of one mesh print with different settings and with a " "whole different extruder." msgstr "" #: fdmprinter.def.json msgctxt "mold_enabled label" msgid "Mold" msgstr "" #: fdmprinter.def.json msgctxt "mold_enabled description" msgid "" "Print models as a mold, which can be cast in order to get a model which " "resembles the models on the build plate." msgstr "" #: fdmprinter.def.json msgctxt "mold_width label" msgid "Minimal Mold Width" msgstr "" #: fdmprinter.def.json msgctxt "mold_width description" msgid "" "The minimal distance between the ouside of the mold and the outside of the " "model." msgstr "" #: fdmprinter.def.json msgctxt "mold_roof_height label" msgid "Mold Roof Height" msgstr "" #: fdmprinter.def.json msgctxt "mold_roof_height description" msgid "The height above horizontal parts in your model which to print mold." msgstr "" #: fdmprinter.def.json msgctxt "mold_angle label" msgid "Mold Angle" msgstr "" #: fdmprinter.def.json msgctxt "mold_angle description" msgid "" "The angle of overhang of the outer walls created for the mold. 0° will make " "the outer shell of the mold vertical, while 90° will make the outside of the " "model follow the contour of the model." msgstr "" #: fdmprinter.def.json msgctxt "support_mesh label" msgid "Support Mesh" msgstr "" #: fdmprinter.def.json msgctxt "support_mesh description" msgid "" "Use this mesh to specify support areas. This can be used to generate support " "structure." msgstr "" #: fdmprinter.def.json msgctxt "anti_overhang_mesh label" msgid "Anti Overhang Mesh" msgstr "" #: fdmprinter.def.json msgctxt "anti_overhang_mesh description" msgid "" "Use this mesh to specify where no part of the model should be detected as " "overhang. This can be used to remove unwanted support structure." msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode label" msgid "Surface Mode" msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode description" msgid "" "Treat the model as a surface only, a volume, or volumes with loose surfaces. " "The normal print mode only prints enclosed volumes. \"Surface\" prints a " "single wall tracing the mesh surface with no infill and no top/bottom skin. " "\"Both\" prints enclosed volumes like normal and any remaining polygons as " "surfaces." msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode option normal" msgid "Normal" msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode option surface" msgid "Surface" msgstr "" #: fdmprinter.def.json msgctxt "magic_mesh_surface_mode option both" msgid "Both" msgstr "" #: fdmprinter.def.json msgctxt "magic_spiralize label" msgid "Spiralize Outer Contour" msgstr "" #: fdmprinter.def.json msgctxt "magic_spiralize description" msgid "" "Spiralize smooths out the Z move of the outer edge. This will create a " "steady Z increase over the whole print. This feature turns a solid model " "into a single walled print with a solid bottom. This feature should only be " "enabled when each layer only contains a single part." msgstr "" #: fdmprinter.def.json msgctxt "smooth_spiralized_contours label" msgid "Smooth Spiralized Contours" msgstr "" #: fdmprinter.def.json msgctxt "smooth_spiralized_contours description" msgid "" "Smooth the spiralized contours to reduce the visibility of the Z seam (the Z " "seam should be barely visible on the print but will still be visible in the " "layer view). Note that smoothing will tend to blur fine surface details." msgstr "" #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" msgstr "" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "" "Use relative extrusion rather than absolute extrusion. Using relative E-" "steps makes for easier post-processing of the g-code. However, it's not " "supported by all printers and it may produce very slight deviations in the " "amount of deposited material compared to absolute E-steps. Irrespective of " "this setting, the extrusion mode will always be set to absolute before any g-" "code script is output." msgstr "" #: fdmprinter.def.json msgctxt "experimental label" msgid "Experimental" msgstr "" #: fdmprinter.def.json msgctxt "experimental description" msgid "Features that haven't completely been fleshed out yet." msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance label" msgid "Slicing Tolerance" msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance description" msgid "" "Vertical tolerance in the sliced layers. The contours of a layer are " "normally generated by taking cross sections through the middle of each " "layer's thickness (Middle). Alternatively each layer can have the areas " "which fall inside of the volume throughout the entire thickness of the layer " "(Exclusive) or a layer has the areas which fall inside anywhere within the " "layer (Inclusive). Inclusive retains the most details, Exclusive makes for " "the best fit and Middle stays closest to the original surface." msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance option middle" msgid "Middle" msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance option exclusive" msgid "Exclusive" msgstr "" #: fdmprinter.def.json msgctxt "slicing_tolerance option inclusive" msgid "Inclusive" msgstr "" #: fdmprinter.def.json msgctxt "roofing_line_width label" msgid "Top Surface Skin Line Width" msgstr "" #: fdmprinter.def.json msgctxt "roofing_line_width description" msgid "Width of a single line of the areas at the top of the print." msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern label" msgid "Top Surface Skin Pattern" msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern description" msgid "The pattern of the top most layers." msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern option lines" msgid "Lines" msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern option concentric" msgid "Concentric" msgstr "" #: fdmprinter.def.json msgctxt "roofing_pattern option zigzag" msgid "Zig Zag" msgstr "" #: fdmprinter.def.json msgctxt "roofing_angles label" msgid "Top Surface Skin Line Directions" msgstr "" #: fdmprinter.def.json msgctxt "roofing_angles description" msgid "" "A list of integer line directions to use when the top surface skin layers " "use the lines or zig zag pattern. Elements from the list are used " "sequentially as the layers progress and when the end of the list is reached, " "it starts at the beginning again. The list items are separated by commas and " "the whole list is contained in square brackets. Default is an empty list " "which means use the traditional default angles (45 and 135 degrees)." msgstr "" #: fdmprinter.def.json msgctxt "infill_enable_travel_optimization label" msgid "Infill Travel Optimization" msgstr "" #: fdmprinter.def.json msgctxt "infill_enable_travel_optimization description" msgid "" "When enabled, the order in which the infill lines are printed is optimized " "to reduce the distance travelled. The reduction in travel time achieved very " "much depends on the model being sliced, infill pattern, density, etc. Note " "that, for some models that have many small areas of infill, the time to " "slice the model may be greatly increased." msgstr "" #: fdmprinter.def.json msgctxt "material_flow_dependent_temperature label" msgid "Auto Temperature" msgstr "" #: fdmprinter.def.json msgctxt "material_flow_dependent_temperature description" msgid "" "Change the temperature for each layer automatically with the average flow " "speed of that layer." msgstr "" #: fdmprinter.def.json msgctxt "material_flow_temp_graph label" msgid "Flow Temperature Graph" msgstr "" #: fdmprinter.def.json msgctxt "material_flow_temp_graph description" msgid "" "Data linking material flow (in mm3 per second) to temperature (degrees " "Celsius)." msgstr "" #: fdmprinter.def.json msgctxt "minimum_polygon_circumference label" msgid "Minimum Polygon Circumference" msgstr "" #: fdmprinter.def.json msgctxt "minimum_polygon_circumference description" msgid "" "Polygons in sliced layers that have a circumference smaller than this amount " "will be filtered out. Lower values lead to higher resolution mesh at the " "cost of slicing time. It is meant mostly for high resolution SLA printers " "and very tiny 3D models with a lot of details." msgstr "" #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" msgstr "" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "" "Skip some support line connections to make the support structure easier to " "break away. This setting is applicable to the Zig Zag support infill pattern." msgstr "" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" msgstr "" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "" "Leave out a connection between support lines once every N millimeter to make " "the support structure easier to break away." msgstr "" #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" msgstr "" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "" "Skip one in every N connection lines to make the support structure easier to " "break away." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_enabled label" msgid "Enable Draft Shield" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_enabled description" msgid "" "This will create a wall around the model, which traps (hot) air and shields " "against exterior airflow. Especially useful for materials which warp easily." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_dist label" msgid "Draft Shield X/Y Distance" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_dist description" msgid "Distance of the draft shield from the print, in the X/Y directions." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation label" msgid "Draft Shield Limitation" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation description" msgid "" "Set the height of the draft shield. Choose to print the draft shield at the " "full height of the model or at a limited height." msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation option full" msgid "Full" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height_limitation option limited" msgid "Limited" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height label" msgid "Draft Shield Height" msgstr "" #: fdmprinter.def.json msgctxt "draft_shield_height description" msgid "" "Height limitation of the draft shield. Above this height no draft shield " "will be printed." msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_enabled label" msgid "Make Overhang Printable" msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_enabled description" msgid "" "Change the geometry of the printed model such that minimal support is " "required. Steep overhangs will become shallow overhangs. Overhanging areas " "will drop down to become more vertical." msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_angle label" msgid "Maximum Model Angle" msgstr "" #: fdmprinter.def.json msgctxt "conical_overhang_angle description" msgid "" "The maximum angle of overhangs after the they have been made printable. At a " "value of 0° all overhangs are replaced by a piece of model connected to the " "build plate, 90° will not change the model in any way." msgstr "" #: fdmprinter.def.json msgctxt "coasting_enable label" msgid "Enable Coasting" msgstr "" #: fdmprinter.def.json msgctxt "coasting_enable description" msgid "" "Coasting replaces the last part of an extrusion path with a travel path. The " "oozed material is used to print the last piece of the extrusion path in " "order to reduce stringing." msgstr "" #: fdmprinter.def.json msgctxt "coasting_volume label" msgid "Coasting Volume" msgstr "" #: fdmprinter.def.json msgctxt "coasting_volume description" msgid "" "The volume otherwise oozed. This value should generally be close to the " "nozzle diameter cubed." msgstr "" #: fdmprinter.def.json msgctxt "coasting_min_volume label" msgid "Minimum Volume Before Coasting" msgstr "" #: fdmprinter.def.json msgctxt "coasting_min_volume description" msgid "" "The smallest volume an extrusion path should have before allowing coasting. " "For smaller extrusion paths, less pressure has been built up in the bowden " "tube and so the coasted volume is scaled linearly. This value should always " "be larger than the Coasting Volume." msgstr "" #: fdmprinter.def.json msgctxt "coasting_speed label" msgid "Coasting Speed" msgstr "" #: fdmprinter.def.json msgctxt "coasting_speed description" msgid "" "The speed by which to move during coasting, relative to the speed of the " "extrusion path. A value slightly under 100% is advised, since during the " "coasting move the pressure in the bowden tube drops." msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "" "The size of pockets at four-way crossings in the cross 3D pattern at heights " "where the pattern is touching itself." msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_density_image label" msgid "Cross Infill Density Image" msgstr "" #: fdmprinter.def.json msgctxt "cross_infill_density_image description" msgid "" "The file location of an image of which the brightness values determine the " "minimal density at the corresponding location in the infill of the print." msgstr "" #: fdmprinter.def.json msgctxt "cross_support_density_image label" msgid "Cross Fill Density Image for Support" msgstr "" #: fdmprinter.def.json msgctxt "cross_support_density_image description" msgid "" "The file location of an image of which the brightness values determine the " "minimal density at the corresponding location in the support." msgstr "" #: fdmprinter.def.json msgctxt "support_conical_enabled label" msgid "Enable Conical Support" msgstr "" #: fdmprinter.def.json msgctxt "support_conical_enabled description" msgid "Make support areas smaller at the bottom than at the overhang." msgstr "" #: fdmprinter.def.json msgctxt "support_conical_angle label" msgid "Conical Support Angle" msgstr "" #: fdmprinter.def.json msgctxt "support_conical_angle description" msgid "" "The angle of the tilt of conical support. With 0 degrees being vertical, and " "90 degrees being horizontal. Smaller angles cause the support to be more " "sturdy, but consist of more material. Negative angles cause the base of the " "support to be wider than the top." msgstr "" #: fdmprinter.def.json msgctxt "support_conical_min_width label" msgid "Conical Support Minimum Width" msgstr "" #: fdmprinter.def.json msgctxt "support_conical_min_width description" msgid "" "Minimum width to which the base of the conical support area is reduced. " "Small widths can lead to unstable support structures." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_enabled label" msgid "Fuzzy Skin" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_enabled description" msgid "" "Randomly jitter while printing the outer wall, so that the surface has a " "rough and fuzzy look." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_outside_only label" msgid "Fuzzy Skin Outside Only" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_outside_only description" msgid "Jitter only the parts' outlines and not the parts' holes." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_thickness label" msgid "Fuzzy Skin Thickness" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_thickness description" msgid "" "The width within which to jitter. It's advised to keep this below the outer " "wall width, since the inner walls are unaltered." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_density label" msgid "Fuzzy Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_density description" msgid "" "The average density of points introduced on each polygon in a layer. Note " "that the original points of the polygon are discarded, so a low density " "results in a reduction of the resolution." msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_dist label" msgid "Fuzzy Skin Point Distance" msgstr "" #: fdmprinter.def.json msgctxt "magic_fuzzy_skin_point_dist description" msgid "" "The average distance between the random points introduced on each line " "segment. Note that the original points of the polygon are discarded, so a " "high smoothness results in a reduction of the resolution. This value must be " "higher than half the Fuzzy Skin Thickness." msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_max_extrusion_offset label" msgid "Flow Rate Compensation Max Extrusion Offset" msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_max_extrusion_offset description" msgid "" "The maximum distance in mm to move the filament to compensate for changes in " "flow rate." msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_extrusion_offset_factor label" msgid "Flow Rate Compensation Factor" msgstr "" #: fdmprinter.def.json msgctxt "flow_rate_extrusion_offset_factor description" msgid "" "How far to move the filament in order to compensate for changes in flow " "rate, as a percentage of how far the filament would move in one second of " "extrusion." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_enabled label" msgid "Wire Printing" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_enabled description" msgid "" "Print only the outside surface with a sparse webbed structure, printing 'in " "thin air'. This is realized by horizontally printing the contours of the " "model at given Z intervals which are connected via upward and diagonally " "downward lines." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_height label" msgid "WP Connection Height" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_height description" msgid "" "The height of the upward and diagonally downward lines between two " "horizontal parts. This determines the overall density of the net structure. " "Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_inset label" msgid "WP Roof Inset Distance" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_inset description" msgid "" "The distance covered when making a connection from a roof outline inward. " "Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed label" msgid "WP Speed" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed description" msgid "" "Speed at which the nozzle moves when extruding material. Only applies to " "Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_bottom label" msgid "WP Bottom Printing Speed" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_bottom description" msgid "" "Speed of printing the first layer, which is the only layer touching the " "build platform. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_up label" msgid "WP Upward Printing Speed" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_up description" msgid "" "Speed of printing a line upward 'in thin air'. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_down label" msgid "WP Downward Printing Speed" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_down description" msgid "" "Speed of printing a line diagonally downward. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_flat label" msgid "WP Horizontal Printing Speed" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_printspeed_flat description" msgid "" "Speed of printing the horizontal contours of the model. Only applies to Wire " "Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flow label" msgid "WP Flow" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flow description" msgid "" "Flow compensation: the amount of material extruded is multiplied by this " "value. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flow_connection label" msgid "WP Connection Flow" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flow_connection description" msgid "Flow compensation when going up or down. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flow_flat label" msgid "WP Flat Flow" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flow_flat description" msgid "" "Flow compensation when printing flat lines. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_top_delay label" msgid "WP Top Delay" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_top_delay description" msgid "" "Delay time after an upward move, so that the upward line can harden. Only " "applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_bottom_delay label" msgid "WP Bottom Delay" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_bottom_delay description" msgid "Delay time after a downward move. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flat_delay label" msgid "WP Flat Delay" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_flat_delay description" msgid "" "Delay time between two horizontal segments. Introducing such a delay can " "cause better adhesion to previous layers at the connection points, while too " "long delays cause sagging. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_up_half_speed label" msgid "WP Ease Upward" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the " "material in those layers too much. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_top_jump label" msgid "WP Knot Size" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_top_jump description" msgid "" "Creates a small knot at the top of an upward line, so that the consecutive " "horizontal layer has a better chance to connect to it. Only applies to Wire " "Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_fall_down label" msgid "WP Fall Down" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_fall_down description" msgid "" "Distance with which the material falls down after an upward extrusion. This " "distance is compensated for. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_drag_along label" msgid "WP Drag Along" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_drag_along description" msgid "" "Distance with which the material of an upward extrusion is dragged along " "with the diagonally downward extrusion. This distance is compensated for. " "Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_strategy label" msgid "WP Strategy" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_strategy description" msgid "" "Strategy for making sure two consecutive layers connect at each connection " "point. Retraction lets the upward lines harden in the right position, but " "may cause filament grinding. A knot can be made at the end of an upward line " "to heighten the chance of connecting to it and to let the line cool; " "however, it may require slow printing speeds. Another strategy is to " "compensate for the sagging of the top of an upward line; however, the lines " "won't always fall down as predicted." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_strategy option compensate" msgid "Compensate" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_strategy option knot" msgid "Knot" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_strategy option retract" msgid "Retract" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_straight_before_down label" msgid "WP Straighten Downward Lines" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_straight_before_down description" msgid "" "Percentage of a diagonally downward line which is covered by a horizontal " "line piece. This can prevent sagging of the top most point of upward lines. " "Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_fall_down label" msgid "WP Roof Fall Down" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_fall_down description" msgid "" "The distance which horizontal roof lines printed 'in thin air' fall down " "when being printed. This distance is compensated for. Only applies to Wire " "Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_drag_along label" msgid "WP Roof Drag Along" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_drag_along description" msgid "" "The distance of the end piece of an inward line which gets dragged along " "when going back to the outer outline of the roof. This distance is " "compensated for. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_outer_delay label" msgid "WP Roof Outer Delay" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_roof_outer_delay description" msgid "" "Time spent at the outer perimeters of hole which is to become a roof. Longer " "times can ensure a better connection. Only applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "wireframe_nozzle_clearance label" msgid "WP Nozzle Clearance" msgstr "" #: fdmprinter.def.json msgctxt "wireframe_nozzle_clearance description" msgid "" "Distance between the nozzle and horizontally downward lines. Larger " "clearance results in diagonally downward lines with a less steep angle, " "which in turn results in less upward connections with the next layer. Only " "applies to Wire Printing." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_enabled label" msgid "Use Adaptive Layers" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_enabled description" msgid "" "Adaptive layers computes the layer heights depending on the shape of the " "model." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation label" msgid "Adaptive Layers Maximum Variation" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation description" msgid "The maximum allowed height different from the base layer height." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation_step label" msgid "Adaptive Layers Variation Step Size" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation_step description" msgid "" "The difference in height of the next layer height compared to the previous " "one." msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_threshold label" msgid "Adaptive Layers Topography Size" msgstr "" #: fdmprinter.def.json msgctxt "adaptive_layer_height_threshold description" msgid "" "Target horizontal distance between two adjacent layers. Reducing this " "setting causes thinner layers to be used to bring the edges of the layers " "closer together." msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_angle label" msgid "Overhanging Wall Angle" msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_angle description" msgid "" "Walls that overhang more than this angle will be printed using overhanging " "wall settings. When the value is 90, no walls will be treated as " "overhanging. Overhang that gets supported by support will not be treated as " "overhang either." msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_speed_factor label" msgid "Overhanging Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "wall_overhang_speed_factor description" msgid "" "Overhanging walls will be printed at this percentage of their normal print " "speed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_settings_enabled label" msgid "Enable Bridge Settings" msgstr "" #: fdmprinter.def.json msgctxt "bridge_settings_enabled description" msgid "" "Detect bridges and modify print speed, flow and fan settings while bridges " "are printed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_min_length label" msgid "Minimum Bridge Wall Length" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_min_length description" msgid "" "Unsupported walls shorter than this will be printed using the normal wall " "settings. Longer unsupported walls will be printed using the bridge wall " "settings." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_support_threshold label" msgid "Bridge Skin Support Threshold" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_support_threshold description" msgid "" "If a skin region is supported for less than this percentage of its area, " "print it using the bridge settings. Otherwise it is printed using the normal " "skin settings." msgstr "" #: fdmprinter.def.json msgctxt "bridge_sparse_infill_max_density label" msgid "Bridge Sparse Infill Max Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_sparse_infill_max_density description" msgid "" "Maximum density of infill considered to be sparse. Skin over sparse infill " "is considered to be unsupported and so may be treated as a bridge skin." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_coast label" msgid "Bridge Wall Coasting" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_coast description" msgid "" "This controls the distance the extruder should coast immediately before a " "bridge wall begins. Coasting before the bridge starts can reduce the " "pressure in the nozzle and may produce a flatter bridge." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_speed label" msgid "Bridge Wall Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_speed description" msgid "The speed at which the bridge walls are printed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_material_flow label" msgid "Bridge Wall Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_wall_material_flow description" msgid "" "When printing bridge walls, the amount of material extruded is multiplied by " "this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed label" msgid "Bridge Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed description" msgid "The speed at which bridge skin regions are printed." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow label" msgid "Bridge Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow description" msgid "" "When printing bridge skin regions, the amount of material extruded is " "multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density label" msgid "Bridge Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density description" msgid "" "The density of the bridge skin layer. Values less than 100 will increase the " "gaps between the skin lines." msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed label" msgid "Bridge Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed description" msgid "Percentage fan speed to use when printing bridge walls and skin." msgstr "" #: fdmprinter.def.json msgctxt "bridge_enable_more_layers label" msgid "Bridge Has Multiple Layers" msgstr "" #: fdmprinter.def.json msgctxt "bridge_enable_more_layers description" msgid "" "If enabled, the second and third layers above the air are printed using the " "following settings. Otherwise, those layers are printed using the normal " "settings." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_2 label" msgid "Bridge Second Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_2 description" msgid "Print speed to use when printing the second bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_2 label" msgid "Bridge Second Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_2 description" msgid "" "When printing the second bridge skin layer, the amount of material extruded " "is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_2 label" msgid "Bridge Second Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_2 description" msgid "" "The density of the second bridge skin layer. Values less than 100 will " "increase the gaps between the skin lines." msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_2 label" msgid "Bridge Second Skin Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_2 description" msgid "Percentage fan speed to use when printing the second bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_3 label" msgid "Bridge Third Skin Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_speed_3 description" msgid "Print speed to use when printing the third bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_3 label" msgid "Bridge Third Skin Flow" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_material_flow_3 description" msgid "" "When printing the third bridge skin layer, the amount of material extruded " "is multiplied by this value." msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_3 label" msgid "Bridge Third Skin Density" msgstr "" #: fdmprinter.def.json msgctxt "bridge_skin_density_3 description" msgid "" "The density of the third bridge skin layer. Values less than 100 will " "increase the gaps between the skin lines." msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_3 label" msgid "Bridge Third Skin Fan Speed" msgstr "" #: fdmprinter.def.json msgctxt "bridge_fan_speed_3 description" msgid "Percentage fan speed to use when printing the third bridge skin layer." msgstr "" #: fdmprinter.def.json msgctxt "clean_between_layers label" msgid "Wipe Nozzle Between Layers" msgstr "" #: fdmprinter.def.json msgctxt "clean_between_layers description" msgid "" "Whether to include nozzle wipe G-Code between layers (maximum 1 per layer). " "Enabling this setting could influence behavior of retract at layer change. " "Please use Wipe Retraction settings to control retraction at layers where " "the wipe script will be working." msgstr "" #: fdmprinter.def.json msgctxt "max_extrusion_before_wipe label" msgid "Material Volume Between Wipes" msgstr "" #: fdmprinter.def.json msgctxt "max_extrusion_before_wipe description" msgid "" "Maximum material that can be extruded before another nozzle wipe is " "initiated. If this value is less than the volume of material required in a " "layer, the setting has no effect in this layer, i.e. it is limited to one " "wipe per layer." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_enable label" msgid "Wipe Retraction Enable" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_enable description" msgid "Retract the filament when the nozzle is moving over a non-printed area." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_amount label" msgid "Wipe Retraction Distance" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_amount description" msgid "" "Amount to retract the filament so it does not ooze during the wipe sequence." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_extra_prime_amount label" msgid "Wipe Retraction Extra Prime Amount" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_extra_prime_amount description" msgid "" "Some material can ooze away during a wipe travel moves, which can be " "compensated for here." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_speed label" msgid "Wipe Retraction Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_speed description" msgid "" "The speed at which the filament is retracted and primed during a wipe " "retraction move." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_retract_speed label" msgid "Wipe Retraction Retract Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_retract_speed description" msgid "" "The speed at which the filament is retracted during a wipe retraction move." msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_prime_speed label" msgid "Wipe Retraction Prime Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_retraction_prime_speed description" msgid "" "The speed at which the filament is primed during a wipe retraction move." msgstr "" #: fdmprinter.def.json msgctxt "wipe_pause label" msgid "Wipe Pause" msgstr "" #: fdmprinter.def.json msgctxt "wipe_pause description" msgid "Pause after the unretract." msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_enable label" msgid "Wipe Z Hop" msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_enable description" msgid "" "When wiping, the build plate is lowered to create clearance between the " "nozzle and the print. It prevents the nozzle from hitting the print during " "travel moves, reducing the chance to knock the print from the build plate." msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_amount label" msgid "Wipe Z Hop Height" msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_amount description" msgid "The height difference when performing a Z Hop." msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_speed label" msgid "Wipe Hop Speed" msgstr "" #: fdmprinter.def.json msgctxt "wipe_hop_speed description" msgid "Speed to move the z-axis during the hop." msgstr "" #: fdmprinter.def.json msgctxt "wipe_brush_pos_x label" msgid "Wipe Brush X Position" msgstr "" #: fdmprinter.def.json msgctxt "wipe_brush_pos_x description" msgid "X location where wipe script will start." msgstr "" #: fdmprinter.def.json msgctxt "wipe_repeat_count label" msgid "Wipe Repeat Count" msgstr "" #: fdmprinter.def.json msgctxt "wipe_repeat_count description" msgid "Number of times to move the nozzle across the brush." msgstr "" #: fdmprinter.def.json msgctxt "wipe_move_distance label" msgid "Wipe Move Distance" msgstr "" #: fdmprinter.def.json msgctxt "wipe_move_distance description" msgid "The distance to move the head back and forth across the brush." msgstr "" #: fdmprinter.def.json msgctxt "small_hole_max_size label" msgid "Small Hole Max Size" msgstr "" #: fdmprinter.def.json msgctxt "small_hole_max_size description" msgid "" "Holes and part outlines with a diameter smaller than this will be printed " "using Small Feature Speed." msgstr "" #: fdmprinter.def.json msgctxt "small_feature_max_length label" msgid "Small Feature Max Length" msgstr "" #: fdmprinter.def.json msgctxt "small_feature_max_length description" msgid "" "Feature outlines that are shorter than this length will be printed using " "Small Feature Speed." msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor label" msgid "Small Feature Speed" msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor description" msgid "" "Small features will be printed at this percentage of their normal print " "speed. Slower printing can help with adhesion and accuracy." msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor_0 label" msgid "Small Feature Initial Layer Speed" msgstr "" #: fdmprinter.def.json msgctxt "small_feature_speed_factor_0 description" msgid "" "Small features on the first layer will be printed at this percentage of " "their normal print speed. Slower printing can help with adhesion and " "accuracy." msgstr "" #: fdmprinter.def.json msgctxt "command_line_settings label" msgid "Command Line Settings" msgstr "" #: fdmprinter.def.json msgctxt "command_line_settings description" msgid "" "Settings which are only used if CuraEngine isn't called from the Cura " "frontend." msgstr "" #: fdmprinter.def.json msgctxt "center_object label" msgid "Center Object" msgstr "" #: fdmprinter.def.json msgctxt "center_object description" msgid "" "Whether to center the object on the middle of the build platform (0,0), " "instead of using the coordinate system in which the object was saved." msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_x label" msgid "Mesh Position X" msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_x description" msgid "Offset applied to the object in the x direction." msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_y label" msgid "Mesh Position Y" msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_y description" msgid "Offset applied to the object in the y direction." msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_z label" msgid "Mesh Position Z" msgstr "" #: fdmprinter.def.json msgctxt "mesh_position_z description" msgid "" "Offset applied to the object in the z direction. With this you can perform " "what was used to be called 'Object Sink'." msgstr "" #: fdmprinter.def.json msgctxt "mesh_rotation_matrix label" msgid "Mesh Rotation Matrix" msgstr "" #: fdmprinter.def.json msgctxt "mesh_rotation_matrix description" msgid "" "Transformation matrix to be applied to the model when loading it from file." msgstr ""