# Cura # Copyright (C) 2020 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # msgid "" msgstr "" "Project-Id-Version: Cura 4.8\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2020-10-19 13:15+0200\n" "PO-Revision-Date: 2020-03-24 09:36+0100\n" "Last-Translator: Nagy Attila \n" "Language-Team: ATI-SZOFT\n" "Language: hu_HU\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Poedit 2.2.4\n" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171 msgctxt "@label" msgid "Unknown" msgstr "Ismeretlen" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 msgctxt "@label" msgid "The printer(s) below cannot be connected because they are part of a group" msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 msgctxt "@label" msgid "Available networked printers" msgstr "Elérhető hálózati nyomtatók" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211 msgctxt "@menuitem" msgid "Not overridden" msgstr "Nincs felülírva" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76 #, python-brace-format msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338 msgctxt "@label" msgid "Default" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226 msgctxt "@label" msgid "Custom Material" msgstr "Egyedi anyag" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205 msgctxt "@label" msgid "Custom" msgstr "Egyedi" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383 msgctxt "@label" msgid "Custom profiles" msgstr "Egyéni profil" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "Összes támasz típus ({0})" #: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "Minden fájl (*)" #: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178 msgctxt "@info:title" msgid "Login failed" msgstr "Sikertelen bejelentkezés" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "Új hely keresése az objektumokhoz" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" msgid "Finding Location" msgstr "Hely keresés" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "Nincs elég hely az összes objektum építési térfogatához" #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 #: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" msgid "Can't Find Location" msgstr "Nem találok helyet" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104 msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113 msgctxt "@info:title" msgid "Backup" msgstr "Biztonsági mentés" #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup without having proper data or meta data." msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének." #: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup that is higher than the current version." msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől." #: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98 msgctxt "@info:status" msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba." #: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100 msgctxt "@info:title" msgid "Build Volume" msgstr "Építési térfogat" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "A Cura nem tud elindulni" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "

Oops, Ultimaker Cura has encountered something that doesn't seem right.

\n" "

We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.

\n" "

Please send us this Crash Report to fix the problem.

\n" " " msgstr "" "

Hoppá, az Ultimaker Cura olyan dolgokkal találkozott, amelyek hibásnak tűnnek.

\n" "

Az indítás során helyrehozhatatlan hibát tapasztaltunkEzt valószínűleg néhány helytelen konfigurációs fájl okozta. Javasoljuk, hogy biztonsági másolatból állítsa vissza a konfigurációt.

\n" "

A biztonsági mentések a konfigurációs mappában találhatók.

\n" "

Kérjük, küldje el nekünk ezt a hibajelentést a probléma megoldásához.

\n" " " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to Ultimaker" msgstr "Hibajelentés küldése az Ultimaker -nek" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "Hibajelentés részletei" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "Konfigurációs mappa megnyitása" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "Konfiguráció biztonsági mentés és visszaállítás" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "Összeomlás jelentés" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" "

Végzetes hiba történt Cura-ban. Kérjük, küld el nekünk az összeomlás jelentését, hogy javítani tudjuk a hibát.

\n" "

Kérjük használd a \"Jelentés küldés\" gombot a hibajelentés postázásához, így az automatikusan a szerverünkre kerül.

\n" " " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "Rendszer információ" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "Ismeretlen" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "Cura verzió" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "Felület" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "Qt verzió" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "PyQt verzió" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "OpenGL" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized
" msgstr "Még nincs inicializálva
" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "
  • OpenGL Version: {version}
  • " msgstr "
  • OpenGL Verzió: {version}
  • " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "
  • OpenGL Vendor: {vendor}
  • " msgstr "
  • OpenGL terjesztő: {vendor}
  • " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "
  • OpenGL Renderer: {renderer}
  • " msgstr "
  • OpenGL Renderer: {renderer}
  • " #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "Hibakövetés" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389 msgctxt "@title:groupbox" msgid "Logs" msgstr "Naplók" #: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417 msgctxt "@action:button" msgid "Send report" msgstr "Jelentés küldés" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521 msgctxt "@info:progress" msgid "Loading machines..." msgstr "Gépek betöltése ..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528 msgctxt "@info:progress" msgid "Setting up preferences..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657 msgctxt "@info:progress" msgid "Initializing Active Machine..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788 msgctxt "@info:progress" msgid "Initializing machine manager..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802 msgctxt "@info:progress" msgid "Initializing build volume..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870 msgctxt "@info:progress" msgid "Setting up scene..." msgstr "Felület beállítása..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906 msgctxt "@info:progress" msgid "Loading interface..." msgstr "Interfészek betöltése..." #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911 msgctxt "@info:progress" msgid "Initializing engine..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221 #, python-format msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." msgid "%(width).1f x %(depth).1f x %(height).1f mm" msgstr "%(width).1f x %(depth).1f x %(height).1f mm" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777 #, python-brace-format msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 msgctxt "@info:title" msgid "Warning" msgstr "Figyelem" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787 #, python-brace-format msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}" #: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139 msgctxt "@info:title" msgid "Error" msgstr "Hiba" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26 msgctxt "@info:status" msgid "Multiplying and placing objects" msgstr "Tárgyak többszörözése és elhelyezése" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28 msgctxt "@info:title" msgid "Placing Objects" msgstr "Tárgyak elhelyezése" #: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77 msgctxt "@info:title" msgid "Placing Object" msgstr "Tárgy elhelyezése" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90 msgctxt "@message" msgid "Could not read response." msgstr "Nincs olvasható válasz." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74 msgctxt "@message" msgid "The provided state is not correct." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra." #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187 msgctxt "@info" msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 msgctxt "@info" msgid "Unable to reach the Ultimaker account server." msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132 msgctxt "@title:window" msgid "File Already Exists" msgstr "A fájl már létezik" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "A {0} fájl már létezik. Biztosan szeretnéd, hogy felülírjuk?" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "Érvénytelen fájl URL:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" msgstr "A profil exportálása nem sikerült {0}: {1}" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." msgstr "A profil exportálása nem sikerült {0}:Az író beépülő modul hibát jelez." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" msgstr "Profil exportálva ide: {0}" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157 msgctxt "@info:title" msgid "Export succeeded" msgstr "Sikeres export" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}: {1}" msgstr "Sikertelen profil importálás {0}: {1} -ból" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Can't import profile from {0} before a printer is added." msgstr "Nem importálható a profil {0} -ból, mielőtt hozzá nem adunk egy nyomtatót." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "No custom profile to import in file {0}" msgstr "Nincs egyéni profil a {0} fájlban, amelyet importálni lehetne" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "A profil importálása nem sikerült {0}:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." msgstr "Ez a {0} profil helytelen adatokat tartamaz, ezért nem importálható." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to import profile from {0}:" msgstr "Nem importálható a profil {0}:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "A {0} fájl nem tartalmaz érvényes profilt." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "A(z) {0} profil ismeretlen fájltípusú vagy sérült." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423 msgctxt "@label" msgid "Custom profile" msgstr "Egyedi profil" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "Hiányzik a profil minőségi típusa." #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443 msgctxt "@info:status" msgid "Global stack is missing." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463 #, python-brace-format msgctxt "@info:status" msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468 #, python-brace-format msgctxt "@info:status" msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "Nem támogatott" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216 msgctxt "@label" msgid "Nozzle" msgstr "Fúvóka" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860 msgctxt "@info:message Followed by a list of settings." msgid "Settings have been changed to match the current availability of extruders:" msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862 msgctxt "@info:title" msgid "Settings updated" msgstr "Beállítások frissítve" #: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447 msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "Extruder(ek) kikapcsolva" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48 msgctxt "@action:button" msgid "Add" msgstr "Hozzáad" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263 msgctxt "@action:button" msgid "Finish" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292 msgctxt "@action:button" msgid "Cancel" msgstr "Elvet" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" msgstr "Csoport #{group_nr}" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83 msgctxt "@tooltip" msgid "Outer Wall" msgstr "Külső fal" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84 msgctxt "@tooltip" msgid "Inner Walls" msgstr "Belső falak" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85 msgctxt "@tooltip" msgid "Skin" msgstr "Héj" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86 msgctxt "@tooltip" msgid "Infill" msgstr "Kitöltés" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Support Infill" msgstr "Támasz kitöltés" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Support Interface" msgstr "Támasz interface" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Support" msgstr "Támasz" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Skirt" msgstr "Szoknya" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Prime Tower" msgstr "Elsődleges torony" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Travel" msgstr "Átmozgás" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Retractions" msgstr "Visszahúzás" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94 msgctxt "@tooltip" msgid "Other" msgstr "Egyéb" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56 msgctxt "@action:button" msgid "Next" msgstr "Következő" #: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127 msgctxt "@action:button" msgid "Close" msgstr "Bezár" #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "3D-s modellsegéd" #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96 #, python-brace-format msgctxt "@info:status" msgid "" "

    One or more 3D models may not print optimally due to the model size and material configuration:

    \n" "

    {model_names}

    \n" "

    Find out how to ensure the best possible print quality and reliability.

    \n" "

    View print quality guide

    " msgstr "" "

    Lehetséges, hogy egy vagy több 3D-s modellt nem lehet optimálisan kinyomtatni a modell mérete és az anyagkonfiguráció miatt:

    \n" "

    {model_names}

    \n" "

    Itt Megtudhatja, hogyan lehet a lehető legjobb nyomtatási minőséget és megbízhatóságot biztosítani.

    \n" "

    View print quality guide

    " #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Project file {0} contains an unknown machine type {1}. Cannot import the machine. Models will be imported instead." msgstr "A projekt fájl {0} egy ismeretlen {1} géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538 msgctxt "@info:title" msgid "Open Project File" msgstr "Projekt fájl megnyitása" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686 #, python-brace-format msgctxt "@info:error Don't translate the XML tag !" msgid "Project file {0} is made using profiles that are unknown to this version of Ultimaker Cura." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203 msgctxt "@title:tab" msgid "Recommended" msgstr "Ajánlott" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205 msgctxt "@title:tab" msgid "Custom" msgstr "Egyedi" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "3MF fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96 msgctxt "@error:zip" msgid "The operating system does not allow saving a project file to this location or with this file name." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185 msgctxt "@error:zip" msgid "Error writing 3mf file." msgstr "Hiba a 3mf fájl írásakor." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "3MF fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "Cura projekt 3MF fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" msgid "AMF File" msgstr "AMF fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 msgctxt "@info:title" msgid "Backups" msgstr "Biztonsági mentések" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27 msgctxt "@info:backup_status" msgid "There was an error while uploading your backup." msgstr "Hiba történt a biztonsági mentés feltöltése közben." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47 msgctxt "@info:backup_status" msgid "Creating your backup..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54 msgctxt "@info:backup_status" msgid "There was an error while creating your backup." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58 msgctxt "@info:backup_status" msgid "Uploading your backup..." msgstr "A biztonsági mentés feltöltése ..." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68 msgctxt "@info:backup_status" msgid "Your backup has finished uploading." msgstr "A biztonsági mentés feltöltése befejeződött." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107 msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "Hiba történt a biztonsági másolat visszaállításakor." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64 msgctxt "@item:inmenu" msgid "Manage backups" msgstr "Bitonsági mentések kezelése" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Nem lehet szeletelni a jelenlegi alapanyaggal, mert nem kompatibilis a kiválasztott nyomtatóval, vagy a beállításaival." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441 msgctxt "@info:title" msgid "Unable to slice" msgstr "Nem lehet szeletelni" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice with the current settings. The following settings have errors: {0}" msgstr "Nem lehet szeletelni ezekkel a beállításokkal. Ezek a beállítások okoznak hibát: {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" msgstr "Nem lehet szeletelni pár modell beállítás miatt. A következő beállításokokoznak hibát egy vagy több modellnél: {error_labels}" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419 msgctxt "@info:status" msgid "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "Nem lehet szeletelni, mert az elsődleges torony, vagy az elsődleges pozíció érvénytelen." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 #, python-format msgctxt "@info:status" msgid "Unable to slice because there are objects associated with disabled Extruder %s." msgstr "Nem lehet szeletelni, mert vannak olyan objektumok, amelyek a letiltott Extruderhez vannak társítva.%s." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" "- Fit within the build volume\n" "- Are assigned to an enabled extruder\n" "- Are not all set as modifier meshes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Réteg feldolgozás" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:title" msgid "Information" msgstr "Információ" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Cura Profil" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 msgctxt "@info" msgid "Could not access update information." msgstr "Nem sikerült elérni a frissítési információkat." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" msgstr "Új %s firmware elérhető" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" msgid "How to update" msgstr "Hogyan frissíts" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 msgctxt "@action" msgid "Update Firmware" msgstr "Firmware frissítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "Tömörített G-kód fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot." #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "G-code Fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347 msgctxt "@info:status" msgid "Parsing G-code" msgstr "G-kód elemzés" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503 msgctxt "@info:title" msgid "G-code Details" msgstr "G-kód részletek" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501 msgctxt "@info:generic" msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos." #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "G File" msgstr "G fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74 msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot." #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 #: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "Készítse elő a G-kódot az exportálás előtt." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "JPG kép" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "JPEG kép" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "PNG kép" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "BMP kép" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "GIF kép" #: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "Cura 15.04 profil" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 msgctxt "@action" msgid "Machine Settings" msgstr "Gép beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" msgid "Monitor" msgstr "Monitor" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" msgid "Per Model Settings" msgstr "Modellenkénti beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15 msgctxt "@info:tooltip" msgid "Configure Per Model Settings" msgstr "Modellenkénti beállítások konfigurálása" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 msgctxt "@item:inmenu" msgid "Post Processing" msgstr "Utólagos műveletek" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 msgctxt "@item:inmenu" msgid "Modify G-Code" msgstr "G-kód módosítás" #: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" msgstr "Előkészítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" msgid "Preview" msgstr "Előnézet" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "Mentés külső meghajtóra" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "Mentés külső meghajtóra {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "Nincsenek elérhető fájlformátumok az íráshoz!" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" msgstr "Mentés külső meghajóra {0}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96 msgctxt "@info:title" msgid "Saving" msgstr "Mentés" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" msgstr "Sikertelen mentés {0}: {1}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Nem található a fájlnév {device} -on az írási művelethez." #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "Sikertelen mentés a {0}: {1} meghajtóra." #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "Mentve a {0} meghajtóra, mint {1}" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147 msgctxt "@info:title" msgid "File Saved" msgstr "Fájl Mentve" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 msgctxt "@action:button" msgid "Eject" msgstr "Leválaszt" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "{0} meghajtó leválasztása" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "{0} leválasztva. Eltávolíthatod az adathordozót." #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "Hardver biztonságos eltávolítása" #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "{0} leválasztása sikertelen. A meghajtó használatban van." #: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "Cserélhető meghajtó" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121 msgctxt "@info:status" msgid "Cura does not accurately display layers when Wire Printing is enabled." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122 msgctxt "@info:title" msgid "Simulation View" msgstr "Szimuláció nézet" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123 msgctxt "@info:status" msgid "Nothing is shown because you need to slice first." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123 msgctxt "@info:title" msgid "No layers to show" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15 msgctxt "@item:inlistbox" msgid "Layer view" msgstr "Réteg nézet" #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70 msgctxt "@info:status" msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72 msgctxt "@info:title" msgid "Model errors" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" msgstr "Felület nézet" #: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12 msgctxt "@label" msgid "Support Blocker" msgstr "Támasz blokkoló" #: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" msgid "Create a volume in which supports are not printed." msgstr "Hozzon létre egy kötetet, amelyben a támaszok nem kerülnek nyomtatásra." #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142 msgctxt "@info:generic" msgid "Do you want to sync material and software packages with your account?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93 msgctxt "@info:title" msgid "Changes detected from your Ultimaker account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146 msgctxt "@action:button" msgid "Sync" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89 msgctxt "@info:generic" msgid "Syncing..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9 msgctxt "@button" msgid "Decline" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56 msgctxt "@button" msgid "Agree" msgstr "Elfogadás" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74 msgctxt "@title:window" msgid "Plugin License Agreement" msgstr "Kiegészítő licencszerződés" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38 msgctxt "@button" msgid "Decline and remove from account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20 msgctxt "@info:generic" msgid "You need to quit and restart {} before changes have effect." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76 msgctxt "@info:generic" msgid "{} plugins failed to download" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15 msgctxt "@item:inlistbox 'Open' is part of the name of this file format." msgid "Open Compressed Triangle Mesh" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" msgid "COLLADA Digital Asset Exchange" msgstr "COLLADA digitális eszközcsere" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" msgid "glTF Binary" msgstr "glTF Bináris" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27 msgctxt "@item:inlistbox" msgid "glTF Embedded JSON" msgstr "glTF beágyazott JSON" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36 msgctxt "@item:inlistbox" msgid "Stanford Triangle Format" msgstr "Stanford háromszög formátum" #: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40 msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "Tömörített COLLADA digitális eszközcsere" #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "Ultimaker Format Package" msgstr "Ultimaker formátumcsomag" #: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146 msgctxt "@info:error" msgid "Can't write to UFP file:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 msgctxt "@action" msgid "Level build plate" msgstr "Tárgyasztal szint" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" msgid "Select upgrades" msgstr "Válassz frissítést" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152 msgctxt "@action:button" msgid "Print via cloud" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153 msgctxt "@properties:tooltip" msgid "Print via cloud" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 msgctxt "@info:status" msgid "Connected via cloud" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264 #, python-brace-format msgctxt "@error:send" msgid "Unknown error code when uploading print job: {0}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" msgid_plural "... and {0} others" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 msgctxt "@action:button" msgid "Remove printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460 msgctxt "@title:window" msgid "Remove printers?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463 #, python-brace-format msgctxt "@label" msgid "" "You are about to remove {0} printer from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27 msgctxt "@info:status" msgid "Send and monitor print jobs from anywhere using your Ultimaker account." msgstr "Küldjön és felügyeljen nyomtatási feladatokat bárhonnan az Ultimaker fiókjával." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33 msgctxt "@info:status Ultimaker Cloud should not be translated." msgid "Connect to Ultimaker Digital Factory" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36 msgctxt "@action" msgid "Get started" msgstr "Kezdjük el" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 msgctxt "@info:status" msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" msgid "Update your printer" msgstr "Frissítse a nyomtatót" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format msgctxt "@info:status" msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 msgctxt "@info:title" msgid "Sending materials to printer" msgstr "Anyagok küldése a nyomtatóra" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." msgstr "Megpróbált csatlakozni a (z) {0} -hez, de a gép nem része a csoportnak.Látogasson el a weboldalra, és konfigurálhatja azt csoporttagnak." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "Nem csoport" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35 msgctxt "@action" msgid "Configure group" msgstr "Csoport konfiguráció" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "Várja meg, amíg az aktuális feladat elküldésre kerül." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "Nyomtatási hiba" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "Nem sikerült feltölteni az adatokat a nyomtatóra." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "Hálózati hiba" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" msgid "Sending Print Job" msgstr "Nyomtatási feladat küldése" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" msgid "Uploading print job to printer." msgstr "A nyomtatási feladat feltöltése a nyomtatóra." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "A nyomtatási feladat sikeresen elküldésre került a nyomtatóra." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "Adatok elküldve" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "Hálózati nyomtatás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "Hálózati nyomtatás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 msgctxt "@info:status" msgid "Connected over the network" msgstr "Csatlakozva hálózaton keresztül" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 msgctxt "@action" msgid "Connect via Network" msgstr "Hálózati csatlakozás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" msgid "tomorrow" msgstr "holnap" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 msgctxt "@info:status" msgid "today" msgstr "ma" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 msgctxt "@item:inmenu" msgid "USB printing" msgstr "USB nyomtatás" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print via USB" msgstr "Nyomtatás USB-ről" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 msgctxt "@info:tooltip" msgid "Print via USB" msgstr "Nyomtatás USB-ről" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 msgctxt "@info:status" msgid "Connected via USB" msgstr "Csatlakozás USB-n" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 msgctxt "@label" msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" msgstr "USB nyomtatás folyamatban van, a Cura bezárása leállítja ezt a nyomtatást. Biztos vagy ebben?" #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 msgctxt "@message" msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." msgstr "A nyomtatás még folyamatban van. A Cura nem indíthat új nyomtatást USB-n keresztül, amíg az előző nyomtatás be nem fejeződött." #: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134 msgctxt "@message" msgid "Print in Progress" msgstr "Nyomtatás folyamatban" #: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" msgid "X3D File" msgstr "X3D Fájl" #: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" msgstr "Röntgen nézet" #: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22 msgctxt "@info:tooltip" msgid "Some things could be problematic in this print. Click to see tips for adjustment." msgstr "Néhány dolog problémát jelenthet ebben a nyomtatásban.Kattintson ide a beállítási tippek megtekintéséhez." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14 msgctxt "@title:window" msgid "Open Project" msgstr "Projekt megnyitása" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61 msgctxt "@action:ComboBox Update/override existing profile" msgid "Update existing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62 msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "Összegzés - Cura Project" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93 msgctxt "@action:label" msgid "Printer settings" msgstr "Nyomtató beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112 msgctxt "@info:tooltip" msgid "How should the conflict in the machine be resolved?" msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102 msgctxt "@action:label" msgid "Type" msgstr "Típus" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 msgctxt "@action:label" msgid "Printer Group" msgstr "Nyomtató csoport" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218 msgctxt "@action:label" msgid "Profile settings" msgstr "Profil beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219 msgctxt "@info:tooltip" msgid "How should the conflict in the profile be resolved?" msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242 msgctxt "@action:label" msgid "Name" msgstr "Név" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259 msgctxt "@action:label" msgid "Intent" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226 msgctxt "@action:label" msgid "Not in profile" msgstr "Nincs a profilban" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" msgstr[0] "%1 felülírás" msgstr[1] "%1 felülírás" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287 msgctxt "@action:label" msgid "Derivative from" msgstr "Származék" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292 msgctxt "@action:label" msgid "%1, %2 override" msgid_plural "%1, %2 overrides" msgstr[0] "%1, %2 felülírás" msgstr[1] "%1, %2 felülírás" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309 msgctxt "@action:label" msgid "Material settings" msgstr "Alapanyag beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325 msgctxt "@info:tooltip" msgid "How should the conflict in the material be resolved?" msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369 msgctxt "@action:label" msgid "Setting visibility" msgstr "Beállítások láthatósága" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378 msgctxt "@action:label" msgid "Mode" msgstr "Mód" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394 msgctxt "@action:label" msgid "Visible settings:" msgstr "Látható beállítások:" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399 msgctxt "@action:label" msgid "%1 out of %2" msgstr "%1 %2 -ből" #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425 msgctxt "@action:warning" msgid "Loading a project will clear all models on the build plate." msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról." #: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453 msgctxt "@action:button" msgid "Open" msgstr "Megnyitás" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" msgid "Want more?" msgstr "Többet szeretnél?" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" msgid "Backup Now" msgstr "Biztonsági mentés most" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 msgctxt "@checkbox:description" msgid "Auto Backup" msgstr "Automatikus biztonsági mentés" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 msgctxt "@checkbox:description" msgid "Automatically create a backup each day that Cura is started." msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71 msgctxt "@button" msgid "Restore" msgstr "Visszaállítás" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99 msgctxt "@dialog:title" msgid "Delete Backup" msgstr "Biztonsági mentés törlés" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100 msgctxt "@dialog:info" msgid "Are you sure you want to delete this backup? This cannot be undone." msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108 msgctxt "@dialog:title" msgid "Restore Backup" msgstr "Helyreállítás biztonsági mentésből" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109 msgctxt "@dialog:info" msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 msgctxt "@backuplist:label" msgid "Cura Version" msgstr "Cura verzió" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 msgctxt "@backuplist:label" msgid "Machines" msgstr "Gépek" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 msgctxt "@backuplist:label" msgid "Materials" msgstr "Alapanyagok" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 msgctxt "@backuplist:label" msgid "Profiles" msgstr "Profilok" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 msgctxt "@backuplist:label" msgid "Plugins" msgstr "Beépülők" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25 msgctxt "@title:window" msgid "Cura Backups" msgstr "Cura biztonsági mentések" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 msgctxt "@title" msgid "My Backups" msgstr "Biztonsági mentéseim" #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38 msgctxt "@empty_state" msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60 msgctxt "@backup_limit_info" msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "A Cura beállítások biztonsági mentése és szinkronizálása." #: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125 msgctxt "@button" msgid "Sign in" msgstr "Bejelentkezés" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "Firmware frissítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "A firmware egy szoftver, ami közvetlenül a nyomtatón fut. Ez vezérli a léptető motorokat, szabályozza a hőmérsékleteket, és az egész nyomtató működését." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "A firmware a nyomtató része, így a használatba vételkor már a gépen található.Azonban készülnek belőle újabb verziók, amik esetleges hibákat szüntetnek meg, illetve egyéb új funkciókat biztosíthatnak." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Automatikus firmware frissítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Egyedi firmware feltöltése" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "A firmware feltöltés nem lehetséges, mert nincs a nyomtatóval kapcsolat." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "A firmware feltöltés nem lehetséges, mert ugyan a nyomtató kapcsolódik, de az nem támogatja a firmware frissítést." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Egyedi firmware kiválasztása" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119 msgctxt "@title:window" msgid "Firmware Update" msgstr "Firmware frissítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143 msgctxt "@label" msgid "Updating firmware." msgstr "A firmware frissítése." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145 msgctxt "@label" msgid "Firmware update completed." msgstr "Firmware frissítés kész." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "A firmware frissítés meghiúsult ismeretlen hiba miatt." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "A firmware frissítés meghiúsult kommunikációs hiba miatt." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "A firmware frissítés meghiúsult input/output hiba miatt." #: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "A firmware frissítés meghiúsult, mert nem található a firmware." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19 msgctxt "@title:window" msgid "Convert Image..." msgstr "Kép konvertálás..." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "Az egyes pixelek legnagyobb távolsága \"Base.\"" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38 msgctxt "@action:label" msgid "Height (mm)" msgstr "Magasság (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "Az alap magassága a tárgyasztaltól mm -ben." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61 msgctxt "@action:label" msgid "Base (mm)" msgstr "Alap (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate." msgstr "A szélesség mm -ben a tárgyasztalon." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84 msgctxt "@action:label" msgid "Width (mm)" msgstr "Szélesség (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "A mélység mm-ben a tárgyasztalon" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108 msgctxt "@action:label" msgid "Depth (mm)" msgstr "Mélység (mm)" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126 msgctxt "@info:tooltip" msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." msgstr "A litofánok esetében a sötét képpontoknak a vastagabb helyek felelnek meg.Ez azért van így, mert minél vastagabb a hely, annál kevesebb fényt enged át.A magassági térképeknél a világosabb képpontok magasabb szintnek felelnek meg, tehát a generált 3D modellnél ezeket figyelembe kell venni.Ez azt is jelenti, hogy általában a generált modell a tényleges kép negatívja kell, hogy legyen." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "A sötétebb a magasabb" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "A világosabb a magasabb" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149 msgctxt "@info:tooltip" msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 msgctxt "@item:inlistbox" msgid "Linear" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171 msgctxt "@info:tooltip" msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "A kép simításának mértéke." #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200 msgctxt "@action:label" msgid "Smoothing" msgstr "Simítás" #: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361 msgctxt "@action:button" msgid "OK" msgstr "OK" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 msgctxt "@title:tab" msgid "Printer" msgstr "Nyomtató" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 msgctxt "@title:label" msgid "Nozzle Settings" msgstr "Fűvóka beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75 msgctxt "@label" msgid "Nozzle size" msgstr "Fúvóka méret" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 msgctxt "@label" msgid "mm" msgstr "mm" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89 msgctxt "@label" msgid "Compatible material diameter" msgstr "Nyomtatószál átmérő" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105 msgctxt "@label" msgid "Nozzle offset X" msgstr "Fúvóka X eltolás" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120 msgctxt "@label" msgid "Nozzle offset Y" msgstr "Fúvóka Y eltolás" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135 msgctxt "@label" msgid "Cooling Fan Number" msgstr "Hűtőventilátorok száma" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162 msgctxt "@title:label" msgid "Extruder Start G-code" msgstr "Extruder G-kód kezdés" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176 msgctxt "@title:label" msgid "Extruder End G-code" msgstr "Extruder G-kód zárás" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 msgctxt "@title:label" msgid "Printer Settings" msgstr "Nyomtató beállítás" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70 msgctxt "@label" msgid "X (Width)" msgstr "X (Szélesség)" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85 msgctxt "@label" msgid "Y (Depth)" msgstr "Y (Mélység)" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100 msgctxt "@label" msgid "Z (Height)" msgstr "Z (Magasság)" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114 msgctxt "@label" msgid "Build plate shape" msgstr "Tárgyasztal alakja" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127 msgctxt "@label" msgid "Origin at center" msgstr "Origó középen" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139 msgctxt "@label" msgid "Heated bed" msgstr "Fűtött asztal" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151 msgctxt "@label" msgid "Heated build volume" msgstr "Fűtött nyomtatási tér" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163 msgctxt "@label" msgid "G-code flavor" msgstr "G-kód illesztés" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187 msgctxt "@title:label" msgid "Printhead Settings" msgstr "Nyomtatófej beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 msgctxt "@label" msgid "X min" msgstr "X min" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 msgctxt "@label" msgid "Y min" msgstr "Y min" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 msgctxt "@label" msgid "X max" msgstr "X max" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 msgctxt "@label" msgid "Y max" msgstr "Y max" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 msgctxt "@label" msgid "Gantry Height" msgstr "Szán magasság" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293 msgctxt "@label" msgid "Number of Extruders" msgstr "Extruderek száma" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374 msgctxt "@title:label" msgid "Start G-code" msgstr "G-kód kezdés" #: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385 msgctxt "@title:label" msgid "End G-code" msgstr "G-kód zárás" #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100 msgctxt "@info" msgid "" "Please make sure your printer has a connection:\n" "- Check if the printer is turned on.\n" "- Check if the printer is connected to the network.\n" "- Check if you are signed in to discover cloud-connected printers." msgstr "" "Győződj meg, hogy a nyomtató csatlakozása rendben van:\n" "- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n" "- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n" "- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe." #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117 msgctxt "@info" msgid "Please connect your printer to the network." msgstr "Csatlakoztasd a nyomtatót a hálózathoz." #: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155 msgctxt "@label link to technical assistance" msgid "View user manuals online" msgstr "Nézd meg az online felhasználói kézikönyvet" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42 msgctxt "@label" msgid "Mesh Type" msgstr "Háló típus" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82 msgctxt "@label" msgid "Normal model" msgstr "Normál mód" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94 msgctxt "@label" msgid "Print as support" msgstr "Támaszként nyomtassa" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118 msgctxt "@label" msgid "Don't support overlaps" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380 msgctxt "@action:button" msgid "Select settings" msgstr "Beállítások kiválasztása" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "A modellek egyéni beállításainak kiválasztása" #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94 msgctxt "@label:textbox" msgid "Filter..." msgstr "Szűrés..." #: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68 msgctxt "@label:checkbox" msgid "Show all" msgstr "Mindent mutat" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "Utó művelet beépülő" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "Utó művelet szkript" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233 msgctxt "@action" msgid "Add a script" msgstr "Adjon hozzá egy szkriptet" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279 msgctxt "@label" msgid "Settings" msgstr "Beállítások" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49 msgctxt "@label" msgid "Color scheme" msgstr "Szín séma" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107 msgctxt "@label:listbox" msgid "Material Color" msgstr "Alapanyag szín" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111 msgctxt "@label:listbox" msgid "Line Type" msgstr "Vonal típus" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115 msgctxt "@label:listbox" msgid "Speed" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119 msgctxt "@label:listbox" msgid "Layer thickness" msgstr "Réteg vastagság" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156 msgctxt "@label" msgid "Compatibility Mode" msgstr "Kompatibilis mód" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230 msgctxt "@label" msgid "Travels" msgstr "Átmozgás" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236 msgctxt "@label" msgid "Helpers" msgstr "Segítők" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242 msgctxt "@label" msgid "Shell" msgstr "Héj" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65 msgctxt "@label" msgid "Infill" msgstr "Kitöltés" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298 msgctxt "@label" msgid "Only Show Top Layers" msgstr "Csak a felső rétegek megjelenítése" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308 msgctxt "@label" msgid "Show 5 Detailed Layers On Top" msgstr "Mutasson 5 felső réteget részletesen" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322 msgctxt "@label" msgid "Top / Bottom" msgstr "Felső / Alsó" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326 msgctxt "@label" msgid "Inner Wall" msgstr "Belső fal" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384 msgctxt "@label" msgid "min" msgstr "min" #: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433 msgctxt "@label" msgid "max" msgstr "max" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17 msgctxt "@title:window" msgid "More information on anonymous data collection" msgstr "További információ a névtelen adatgyűjtésről" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74 msgctxt "@text:window" msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110 msgctxt "@text:window" msgid "I don't want to send anonymous data" msgstr "Nem szeretnék részt venni az adatgyűjtésben" #: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119 msgctxt "@text:window" msgid "Allow sending anonymous data" msgstr "Anonim adatok küldésének engedélyezése" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25 msgctxt "@action:button" msgid "Back" msgstr "Vissza" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34 msgctxt "@label" msgid "Compatibility" msgstr "Kompatibilitás" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124 msgctxt "@label:table_header" msgid "Machine" msgstr "Gép" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137 msgctxt "@label:table_header" msgid "Build Plate" msgstr "Tárgyasztal" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143 msgctxt "@label:table_header" msgid "Support" msgstr "Támasz" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149 msgctxt "@label:table_header" msgid "Quality" msgstr "Minőség" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170 msgctxt "@action:label" msgid "Technical Data Sheet" msgstr "Technikai adatlap" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179 msgctxt "@action:label" msgid "Safety Data Sheet" msgstr "Biztonsági adatlap" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188 msgctxt "@action:label" msgid "Printing Guidelines" msgstr "Nyomtatási útmutató" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197 msgctxt "@action:label" msgid "Website" msgstr "Weboldal" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20 msgctxt "@action:button" msgid "Installed" msgstr "Telepítve" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56 msgctxt "@label:The string between and is the highlighted link" msgid "Log in is required to install or update" msgstr "Bejelentkezés szükséges a telepítéshez vagy frissítéshez" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80 msgctxt "@label:The string between and is the highlighted link" msgid "Buy material spools" msgstr "Anyagtekercsek vásárlása" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34 msgctxt "@action:button" msgid "Update" msgstr "Frissítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35 msgctxt "@action:button" msgid "Updating" msgstr "Frissítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36 msgctxt "@action:button" msgid "Updated" msgstr "Frissítve" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27 msgctxt "@label" msgid "Premium" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86 msgctxt "@info:tooltip" msgid "Go to Web Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42 msgctxt "@label" msgid "Search materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19 msgctxt "@info" msgid "You will need to restart Cura before changes in packages have effect." msgstr "A csomagok változásainak érvénybe lépése előtt újra kell indítania a Cura-t." #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30 msgctxt "@title:tab" msgid "Plugins" msgstr "Kiegészítők" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89 msgctxt "@title:tab" msgid "Materials" msgstr "Alapanyagok" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58 msgctxt "@title:tab" msgid "Installed" msgstr "Telepítve" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22 msgctxt "@label" msgid "Will install upon restarting" msgstr "Telepítés után újraindul" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53 msgctxt "@label:The string between and is the highlighted link" msgid "Log in is required to update" msgstr "Bejelentkezés szükséges a frissítéshez" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 msgctxt "@action:button" msgid "Downgrade" msgstr "Leminősítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71 msgctxt "@action:button" msgid "Uninstall" msgstr "Eltávolítás" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18 msgctxt "@action:button" msgid "Install" msgstr "Telepítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14 msgctxt "@title" msgid "Changes from your account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 msgctxt "@button" msgid "Dismiss" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 msgctxt "@button" msgid "Next" msgstr "Következő" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52 msgctxt "@label" msgid "The following packages will be added:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97 msgctxt "@label" msgid "The following packages can not be installed because of an incompatible Cura version:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20 msgctxt "@title:window" msgid "Confirm uninstall" msgstr "Eltávolítás jóváhagyása" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50 msgctxt "@text:window" msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults." msgstr "Távolítsd el a még használatban lévő anyagokat és / vagy profilokat.A megerősítés visszaállítja az alapanyagokat / profilokat alapértelmezett értékükre." #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51 msgctxt "@text:window" msgid "Materials" msgstr "Alapanyagok" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52 msgctxt "@text:window" msgid "Profiles" msgstr "Profilok" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90 msgctxt "@action:button" msgid "Confirm" msgstr "Jóváhagy" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36 msgctxt "@label" msgid "You need to accept the license to install the package" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95 msgctxt "@label" msgid "Website" msgstr "Weboldal" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102 msgctxt "@label" msgid "Email" msgstr "Email" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89 msgctxt "@label" msgid "Version" msgstr "Verzió" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96 msgctxt "@label" msgid "Last updated" msgstr "Utosó frissítés" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138 msgctxt "@label" msgid "Brand" msgstr "Márka" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110 msgctxt "@label" msgid "Downloads" msgstr "Letöltések" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 msgctxt "@label" msgid "Community Contributions" msgstr "Közösségi hozzájárulások" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33 msgctxt "@label" msgid "Community Plugins" msgstr "Közösségi bővítmények" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42 msgctxt "@label" msgid "Generic Materials" msgstr "Általános anyagok" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16 msgctxt "@info" msgid "Could not connect to the Cura Package database. Please check your connection." msgstr "Nem sikerült csatlakozni a Cura Package adatbázishoz. Kérjük, ellenőrizze a kapcsolatot." #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33 msgctxt "@title:tab" msgid "Installed plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72 msgctxt "@info" msgid "No plugin has been installed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86 msgctxt "@title:tab" msgid "Installed materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125 msgctxt "@info" msgid "No material has been installed." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139 msgctxt "@title:tab" msgid "Bundled plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184 msgctxt "@title:tab" msgid "Bundled materials" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17 msgctxt "@info" msgid "Fetching packages..." msgstr "Csomagok beolvasása..." #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22 msgctxt "@description" msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19 msgctxt "@title" msgid "Marketplace" msgstr "Áruház" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 msgctxt "@title" msgid "Build Plate Leveling" msgstr "Tálca szintezés" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44 msgctxt "@label" msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak, lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe." #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57 msgctxt "@label" msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége." #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75 msgctxt "@action:button" msgid "Start Build Plate Leveling" msgstr "Tálca szintezés indítása" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87 msgctxt "@action:button" msgid "Move to Next Position" msgstr "Mozgás a következő pozícióba" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" msgid "Please select any upgrades made to this Ultimaker Original" msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit" #: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41 msgctxt "@label" msgid "Heated Build Plate (official kit or self-built)" msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "Csatlakozás hálózati nyomtatóhoz" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 msgctxt "@label" msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." msgstr "Ha hálózaton keresztül szeretnél közvetlenül nyomtatni, akkor győződj meg arról, hogy a nyomtató csatlakozik vezetékes, vagy vezeték nélküli hálózathoz. Ha nincs elérhető hálózat, akkor közvetlenül USB kapcsolaton keresztül is tudsz nyomtatni." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "Válaszd ki a nyomtatódat az alábbi listából:" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77 msgctxt "@action:button" msgid "Edit" msgstr "Szerkeszt" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138 msgctxt "@action:button" msgid "Remove" msgstr "Eltávolít" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96 msgctxt "@action:button" msgid "Refresh" msgstr "Frissít" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176 msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "Ha a nyomtatód nincs a listában, olvasd el a hálózati nyomtatás hibaelhárítási útmutatót" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 msgctxt "@label" msgid "Type" msgstr "Típus" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 msgctxt "@label" msgid "Firmware version" msgstr "Frimware verzió" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 msgctxt "@label" msgid "Address" msgstr "Cím" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "Ez a nyomtató nem úgy van beállítva, hogy nyomtatócsoportot üzemeltessen." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "Ez a nyomtató gazdagépe a %1 nyomtatócsoportnak." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "A címen található nyomtató még nem válaszolt." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283 msgctxt "@action:button" msgid "Connect" msgstr "Csatlakozás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296 msgctxt "@title:window" msgid "Invalid IP address" msgstr "Hibás IP cím" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "Kérlek adj meg egy érvényes IP címet." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308 msgctxt "@title:window" msgid "Printer Address" msgstr "Nyomtató cím" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "Írd be a nyomtató hálózati IP címét." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" msgid "Configuration Changes" msgstr "Konfiguráció változások" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 msgctxt "@action:button" msgid "Override" msgstr "Felülírás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85 msgctxt "@label" msgid "The assigned printer, %1, requires the following configuration change:" msgid_plural "The assigned printer, %1, requires the following configuration changes:" msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:" msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89 msgctxt "@label" msgid "The printer %1 is assigned, but the job contains an unknown material configuration." msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99 msgctxt "@label" msgid "Change material %1 from %2 to %3." msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102 msgctxt "@label" msgid "Load %3 as material %1 (This cannot be overridden)." msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105 msgctxt "@label" msgid "Change print core %1 from %2 to %3." msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108 msgctxt "@label" msgid "Change build plate to %1 (This cannot be overridden)." msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115 msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184 msgctxt "@label" msgid "Glass" msgstr "Üveg" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156 msgctxt "@label" msgid "Aluminum" msgstr "Alumínium" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 msgctxt "@label" msgid "Move to top" msgstr "Lépj a tetjére" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 msgctxt "@label" msgid "Delete" msgstr "Törlés" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289 msgctxt "@label" msgid "Resume" msgstr "Folytat" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 msgctxt "@label" msgid "Pausing..." msgstr "Várakozás..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 msgctxt "@label" msgid "Resuming..." msgstr "Folytatás..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293 msgctxt "@label" msgid "Pause" msgstr "Várakozás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Aborting..." msgstr "Megszakítás..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Abort" msgstr "Megszakít" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "Biztos, hogy a %1 a nyomtatási sor elejére akarod mozgatni?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144 msgctxt "@window:title" msgid "Move print job to top" msgstr "Tedd a nyomtatási sor elejére" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "Biztos, hogy törölni szeretnéd %1?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154 msgctxt "@window:title" msgid "Delete print job" msgstr "Nyomtatási feladat törlés" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "Biztosan meg akarod szakítani %1?" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335 msgctxt "@window:title" msgid "Abort print" msgstr "Nyomtatás megszakítás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "Nyomtató kezelés" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348 msgctxt "@label:status" msgid "Loading..." msgstr "Betöltés..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352 msgctxt "@label:status" msgid "Unavailable" msgstr "Elérhetetlen" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Unreachable" msgstr "Elérhetetlen" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360 msgctxt "@label:status" msgid "Idle" msgstr "Készenlét" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365 msgctxt "@label:status" msgid "Printing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406 msgctxt "@label" msgid "Untitled" msgstr "Felirat nélküli" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427 msgctxt "@label" msgid "Anonymous" msgstr "Névtelen" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "A konfiguráció változtatásokat igényel" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492 msgctxt "@action:button" msgid "Details" msgstr "Részletek" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133 msgctxt "@label" msgid "Unavailable printer" msgstr "Elérhetetlen nyomtató" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135 msgctxt "@label" msgid "First available" msgstr "Az első elérhető" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 msgctxt "@label:status" msgid "Aborted" msgstr "Megszakítva" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 msgctxt "@label:status" msgid "Finished" msgstr "Befejezve" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 msgctxt "@label:status" msgid "Preparing..." msgstr "Előkészítés..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 msgctxt "@label:status" msgid "Aborting..." msgstr "Megszakítás..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 msgctxt "@label:status" msgid "Pausing..." msgstr "Várakozás..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 msgctxt "@label:status" msgid "Paused" msgstr "Várakozás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 msgctxt "@label:status" msgid "Resuming..." msgstr "Folytatás..." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 msgctxt "@label:status" msgid "Action required" msgstr "Beavatkozás szükséges" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 msgctxt "@label:status" msgid "Finishes %1 at %2" msgstr "Befejezve %1 a %2 -ből" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31 msgctxt "@label" msgid "Queued" msgstr "Nyomtatási Sor" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66 msgctxt "@label link to connect manager" msgid "Manage in browser" msgstr "Kezelés a böngészőben" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99 msgctxt "@label" msgid "There are no print jobs in the queue. Slice and send a job to add one." msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot." #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110 msgctxt "@label" msgid "Print jobs" msgstr "Nyomtatások" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122 msgctxt "@label" msgid "Total print time" msgstr "Teljes nyomtatási idő" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134 msgctxt "@label" msgid "Waiting for" msgstr "Várakozom" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11 msgctxt "@title:window" msgid "Print over network" msgstr "Nyomtatás hálózaton" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52 msgctxt "@action:button" msgid "Print" msgstr "Nyomtatás" #: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80 msgctxt "@label" msgid "Printer selection" msgstr "Nyomtató kiválasztás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24 msgctxt "@action:button" msgid "Sign in" msgstr "Bejelentkezés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40 msgctxt "@label" msgid "Your key to connected 3D printing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51 msgctxt "@text" msgid "" "- Customize your experience with more print profiles and plugins\n" "- Stay flexible by syncing your setup and loading it anywhere\n" "- Increase efficiency with a remote workflow on Ultimaker printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142 msgctxt "@button" msgid "Create account" msgstr "Fiók létrehozása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28 msgctxt "@label" msgid "Checking..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35 msgctxt "@label" msgid "Account synced" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42 msgctxt "@label" msgid "Something went wrong..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96 msgctxt "@button" msgid "Install pending updates" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118 msgctxt "@button" msgid "Check for account updates" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81 msgctxt "@label The argument is a timestamp" msgid "Last update: %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109 msgctxt "@button" msgid "Ultimaker Account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125 msgctxt "@button" msgid "Sign Out" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" msgid "No time estimation available" msgstr "Nincs időbecslés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" msgid "No cost estimation available" msgstr "Nincs költségbecslés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 msgctxt "@button" msgid "Preview" msgstr "Előnézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" msgid "Time estimation" msgstr "Időbecslés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114 msgctxt "@label" msgid "Material estimation" msgstr "Anyag becslés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164 msgctxt "@label m for meter" msgid "%1m" msgstr "%1m" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165 msgctxt "@label g for grams" msgid "%1g" msgstr "%1g" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55 msgctxt "@label:PrintjobStatus" msgid "Slicing..." msgstr "Szeletelés..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67 msgctxt "@label:PrintjobStatus" msgid "Unable to slice" msgstr "Nem szeletelhető" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 msgctxt "@button" msgid "Processing" msgstr "Feldolgozás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103 msgctxt "@button" msgid "Slice" msgstr "Szeletelés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104 msgctxt "@label" msgid "Start the slicing process" msgstr "Szeletelés indítása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118 msgctxt "@button" msgid "Cancel" msgstr "Elvet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82 msgctxt "@action:inmenu" msgid "Show Online Troubleshooting Guide" msgstr "Mutassa az online hibaelhárítási útmutatót" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89 msgctxt "@action:inmenu" msgid "Toggle Full Screen" msgstr "Teljes képernyőre váltás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97 msgctxt "@action:inmenu" msgid "Exit Full Screen" msgstr "Kilépés a teljes képernyőn" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104 msgctxt "@action:inmenu menubar:edit" msgid "&Undo" msgstr "&Visszavon" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114 msgctxt "@action:inmenu menubar:edit" msgid "&Redo" msgstr "&Újra" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124 msgctxt "@action:inmenu menubar:file" msgid "&Quit" msgstr "Kilép" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132 msgctxt "@action:inmenu menubar:view" msgid "3D View" msgstr "3D nézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" msgid "Front View" msgstr "Előlnézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" msgid "Top View" msgstr "Felülnézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" msgid "Left Side View" msgstr "Bal oldalnézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" msgid "Right Side View" msgstr "Jobb oldalnézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167 msgctxt "@action:inmenu" msgid "Configure Cura..." msgstr "Cura beállítása..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174 msgctxt "@action:inmenu menubar:printer" msgid "&Add Printer..." msgstr "&Nyomtató hozzáadása..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180 msgctxt "@action:inmenu menubar:printer" msgid "Manage Pr&inters..." msgstr "Nyomtatók kezelése..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187 msgctxt "@action:inmenu" msgid "Manage Materials..." msgstr "Anyagok kezelése..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195 msgctxt "@action:inmenu" msgid "Add more materials from Marketplace" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202 msgctxt "@action:inmenu menubar:profile" msgid "&Update profile with current settings/overrides" msgstr "Profil &frissítése a jelenlegi beállításokkal/felülírásokkal" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210 msgctxt "@action:inmenu menubar:profile" msgid "&Discard current changes" msgstr "&Jelenlegi változtatások eldobása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." msgstr "Profil &létrehozása a jelenlegi beállításokkal/felülírásokkal..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228 msgctxt "@action:inmenu menubar:profile" msgid "Manage Profiles..." msgstr "Profilok kezelése..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236 msgctxt "@action:inmenu menubar:help" msgid "Show Online &Documentation" msgstr "Online &Dokumentumok megjelenítése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244 msgctxt "@action:inmenu menubar:help" msgid "Report a &Bug" msgstr "Hibajelentés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252 msgctxt "@action:inmenu menubar:help" msgid "What's New" msgstr "Újdonságok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258 msgctxt "@action:inmenu menubar:help" msgid "About..." msgstr "Rólunk..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265 msgctxt "@action:inmenu menubar:edit" msgid "Delete Selected Model" msgid_plural "Delete Selected Models" msgstr[0] "Kiválasztott modell törlése" msgstr[1] "Kiválasztott modellek törlése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275 msgctxt "@action:inmenu menubar:edit" msgid "Center Selected Model" msgid_plural "Center Selected Models" msgstr[0] "A kijelölt modellt középre" msgstr[1] "A kijelölt modelleket középre" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284 msgctxt "@action:inmenu menubar:edit" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "A kijelölt modell többszörözése" msgstr[1] "A kijelölt modellek többszörözése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293 msgctxt "@action:inmenu" msgid "Delete Model" msgstr "Modell törlés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301 msgctxt "@action:inmenu" msgid "Ce&nter Model on Platform" msgstr "&Középső modell a platformon" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307 msgctxt "@action:inmenu menubar:edit" msgid "&Group Models" msgstr "&Csoportosítás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327 msgctxt "@action:inmenu menubar:edit" msgid "Ungroup Models" msgstr "Csoport bontása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337 msgctxt "@action:inmenu menubar:edit" msgid "&Merge Models" msgstr "&Modellek keverése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347 msgctxt "@action:inmenu" msgid "&Multiply Model..." msgstr "&Modell többszörözés..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354 msgctxt "@action:inmenu menubar:edit" msgid "Select All Models" msgstr "Mindent kijelöl" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364 msgctxt "@action:inmenu menubar:edit" msgid "Clear Build Plate" msgstr "Tárgyasztal törlése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374 msgctxt "@action:inmenu menubar:file" msgid "Reload All Models" msgstr "Mindent újratölt" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models To All Build Plates" msgstr "Minden modell elrendezése a tárgyasztalon" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" msgstr "Minden modell rendezése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" msgstr "Kijelöltek rendezése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Positions" msgstr "Minden modellpozíció visszaállítása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Transformations" msgstr "Minden modelltranszformáció visszaállítása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419 msgctxt "@action:inmenu menubar:file" msgid "&Open File(s)..." msgstr "Fájl(ok) megnyitása..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427 msgctxt "@action:inmenu menubar:file" msgid "&New Project..." msgstr "Új projekt..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434 msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "Konfigurációs mappa megjelenítése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "Beállítások láthatóságának beállítása..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448 msgctxt "@action:menu" msgid "&Marketplace" msgstr "&Piactér" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "Ez a csomag újraindítás után fog települni." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15 msgctxt "@title:tab" msgid "General" msgstr "Általános" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462 msgctxt "@title:tab" msgid "Settings" msgstr "Beállítások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16 msgctxt "@title:tab" msgid "Printers" msgstr "Nyomtatók" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34 msgctxt "@title:tab" msgid "Profiles" msgstr "Profilok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19 msgctxt "@title:window" msgid "Open file(s)" msgstr "Fájl(ok) megnyitása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744 msgctxt "@window:title" msgid "Install Package" msgstr "Csomag telepítése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752 msgctxt "@title:window" msgid "Open File(s)" msgstr "Fájl(ok) megnyitása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755 msgctxt "@text:window" msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." msgstr "A kiválasztott fájlok között több G-kód fájl is található.Egyszerre csak egy G-kód fájlt nyithat meg, ezért csak egy ilyen fájlt válasszon ki." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858 msgctxt "@title:window" msgid "Add Printer" msgstr "Nyomtató hozzáadása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866 msgctxt "@title:window" msgid "What's New" msgstr "Újdonságok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57 msgctxt "@label" msgid "version: %1" msgstr "verzió: %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "Teljes körű megoldás az olvadószálas 3D-s nyomtatáshoz." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85 msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" msgstr "A Cura-t az Ultimaker B.V fejlesztette ki a közösséggel együttműködésben. A Cura büszkén használja a következő nyílt forráskódú projekteket:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135 msgctxt "@label" msgid "Graphical user interface" msgstr "Grafikai felhasználói interfész" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136 msgctxt "@label" msgid "Application framework" msgstr "Alkalmazás keretrendszer" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137 msgctxt "@label" msgid "G-code generator" msgstr "G-kód generátor" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138 msgctxt "@label" msgid "Interprocess communication library" msgstr "Folyamatközi kommunikációs könyvtár" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label" msgid "Programming language" msgstr "Programozási nyelv" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label" msgid "GUI framework" msgstr "GUI keretrendszer" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label" msgid "GUI framework bindings" msgstr "GUI keretrendszer függőségek" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label" msgid "C/C++ Binding library" msgstr "C/C++ függőségek könyvtár" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144 msgctxt "@label" msgid "Data interchange format" msgstr "Adat csere formátum" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145 msgctxt "@label" msgid "Support library for scientific computing" msgstr "Támogató könyvtár a tudományos számítások számára" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146 msgctxt "@label" msgid "Support library for faster math" msgstr "Támogató könyvtár a gyorsabb matematikához" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147 msgctxt "@label" msgid "Support library for handling STL files" msgstr "Támogató könyvtár az STL fájlok kezeléséhez" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label" msgid "Support library for handling planar objects" msgstr "Támogató könyvtár a sík objektumok kezeléséhez" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label" msgid "Support library for handling triangular meshes" msgstr "Támogató könyvtár a háromszög hálók kezeléséhez" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label" msgid "Support library for handling 3MF files" msgstr "Támogató könyvtár a 3MF fájlok kezeléséhez" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label" msgid "Support library for file metadata and streaming" msgstr "Támogató könyvtár a fájl metaadatokhoz és továbbításához" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152 msgctxt "@label" msgid "Serial communication library" msgstr "Soros kommunikációs könyvtár" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153 msgctxt "@label" msgid "ZeroConf discovery library" msgstr "ZeroConf felderítő könyvtár" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154 msgctxt "@label" msgid "Polygon clipping library" msgstr "Poligon daraboló könyvtár" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155 msgctxt "@Label" msgid "Static type checker for Python" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@Label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158 msgctxt "@Label" msgid "Python Error tracking library" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159 msgctxt "@label" msgid "Polygon packing library, developed by Prusa Research" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160 msgctxt "@label" msgid "Python bindings for libnest2d" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162 msgctxt "@label" msgid "Font" msgstr "Betűtípus" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label" msgid "SVG icons" msgstr "SVG ikonok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label" msgid "Linux cross-distribution application deployment" msgstr "Linux kereszt-disztribúciós alkalmazás telepítése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20 msgctxt "@title:window" msgid "Open project file" msgstr "Projekt fájl megnyitása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93 msgctxt "@text:window" msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103 msgctxt "@text:window" msgid "Remember my choice" msgstr "Emlékezzen a választásra" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122 msgctxt "@action:button" msgid "Open as project" msgstr "Megnyitás projektként" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131 msgctxt "@action:button" msgid "Import models" msgstr "Modellek importálása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15 msgctxt "@title:window" msgid "Discard or Keep changes" msgstr "Változtatások megtartása vagy eldobása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57 msgctxt "@text:window, %1 is a profile name" msgid "" "You have customized some profile settings.\n" "Would you like to Keep these changed settings after switching profiles?\n" "Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111 msgctxt "@title:column" msgid "Profile settings" msgstr "Profil beállítások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125 msgctxt "@title:column" msgid "Current changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "Mindig kérdezz" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159 msgctxt "@option:discardOrKeep" msgid "Discard and never ask again" msgstr "Eldobás és ne kérdezze újra" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160 msgctxt "@option:discardOrKeep" msgid "Keep and never ask again" msgstr "Megtartás és ne kérdezze újra" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197 msgctxt "@action:button" msgid "Discard changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210 msgctxt "@action:button" msgid "Keep changes" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 msgctxt "@text:window" msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" msgstr "Egy vagy több projekt fájlt találtunk a kiválasztott fájlokban.Egyszerre csak egy projekt fájlt nyithat meg. Javasoljuk, hogy csak a modelleket importálja ezekből a fájlokból. Szeretné folytatni?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99 msgctxt "@action:button" msgid "Import all as models" msgstr "Importáljunk mindent modellekként" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15 msgctxt "@title:window" msgid "Save Project" msgstr "Projekt mentése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173 msgctxt "@action:label" msgid "Extruder %1" msgstr "Extruder %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189 msgctxt "@action:label" msgid "%1 & material" msgstr "%1 & alapanyag" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191 msgctxt "@action:label" msgid "Material" msgstr "Alapanyag" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "Ne mutassa újra a projekt összegzését mentés közben" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300 msgctxt "@action:button" msgid "Save" msgstr "Mentés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16 msgctxt "@label %1 is filled in with the name of an extruder" msgid "Print Selected Model with %1" msgid_plural "Print Selected Models with %1" msgstr[0] "Kiválasztott modell nyomtatása %1" msgstr[1] "Kiválasztott modellek nyomtatása %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99 msgctxt "@text Print job name" msgid "Untitled" msgstr "Névtelen" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "&Fájl" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31 msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "S&zerkesztés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "&Nézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "&Beállítások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56 msgctxt "@title:menu menubar:toplevel" msgid "E&xtensions" msgstr "K&iterjesztések" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94 msgctxt "@title:menu menubar:toplevel" msgid "P&references" msgstr "P&referenciák" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102 msgctxt "@title:menu menubar:toplevel" msgid "&Help" msgstr "&Segítség" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148 msgctxt "@title:window" msgid "New project" msgstr "Új projekt" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149 msgctxt "@info:question" msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90 msgctxt "@action:button" msgid "Marketplace" msgstr "Piactér" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 msgctxt "@header" msgid "Configurations" msgstr "Konfigurációk" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 msgctxt "@label" msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 msgctxt "@label" msgid "Marketplace" msgstr "Piactér" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57 msgctxt "@label" msgid "Loading available configurations from the printer..." msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58 msgctxt "@label" msgid "The configurations are not available because the printer is disconnected." msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112 msgctxt "@label" msgid "Select configuration" msgstr "Konfiguráció kiválasztása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223 msgctxt "@label" msgid "Configurations" msgstr "Konfigurációk" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25 msgctxt "@header" msgid "Custom" msgstr "Egyéni" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61 msgctxt "@label" msgid "Printer" msgstr "Nyomtató" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213 msgctxt "@label" msgid "Enabled" msgstr "Bekapcsolt" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267 msgctxt "@label" msgid "Material" msgstr "Alapanyag" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394 msgctxt "@label" msgid "Use glue for better adhesion with this material combination." msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27 msgctxt "@label" msgid "Print Selected Model With:" msgid_plural "Print Selected Models With:" msgstr[0] "Kiválasztott modell nyomtatása:" msgstr[1] "Kiválasztott modellek nyomtatása:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116 msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "Kiválasztott modell sokszorozása" msgstr[1] "Kiválasztott modellek sokszorozása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141 msgctxt "@label" msgid "Number of Copies" msgstr "Másolatok száma" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33 msgctxt "@title:menu menubar:file" msgid "&Save Project..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54 msgctxt "@title:menu menubar:file" msgid "&Export..." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65 msgctxt "@action:inmenu menubar:file" msgid "Export Selection..." msgstr "Kiválasztás exportálása..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13 msgctxt "@label:category menu label" msgid "Material" msgstr "Alapanyag" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54 msgctxt "@label:category menu label" msgid "Favorites" msgstr "Kedvencek" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79 msgctxt "@label:category menu label" msgid "Generic" msgstr "Generikus" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25 msgctxt "@label:category menu label" msgid "Network enabled printers" msgstr "Hálózati nyomtatók" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42 msgctxt "@label:category menu label" msgid "Local printers" msgstr "Helyi nyomtatók" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open &Recent" msgstr "Legutóbbi fájlok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15 msgctxt "@title:menu menubar:settings" msgid "&Printer" msgstr "&Nyomtató" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29 msgctxt "@title:menu" msgid "&Material" msgstr "&Alapanyag" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44 msgctxt "@action:inmenu" msgid "Set as Active Extruder" msgstr "Beállítva aktív extruderként" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50 msgctxt "@action:inmenu" msgid "Enable Extruder" msgstr "Extruder engedélyezése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57 msgctxt "@action:inmenu" msgid "Disable Extruder" msgstr "Extruder letiltása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13 msgctxt "@action:inmenu" msgid "Visible Settings" msgstr "Láthatósági beállítások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42 msgctxt "@action:inmenu" msgid "Collapse All Categories" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51 msgctxt "@action:inmenu" msgid "Manage Setting Visibility..." msgstr "Beállítások láthatóságának kezelése..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" msgstr "&Kamera helyzet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44 msgctxt "@action:inmenu menubar:view" msgid "Camera view" msgstr "Kamera nézet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47 msgctxt "@action:inmenu menubar:view" msgid "Perspective" msgstr "Perspektívikus" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" msgid "Orthographic" msgstr "Merőleges" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80 msgctxt "@action:inmenu menubar:view" msgid "&Build plate" msgstr "&Tárgyasztal" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119 msgctxt "@label:MonitorStatus" msgid "Not connected to a printer" msgstr "Nincs nyomtatóhoz csatlakoztatva" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123 msgctxt "@label:MonitorStatus" msgid "Printer does not accept commands" msgstr "A nyomtató nem fogadja a parancsokat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133 msgctxt "@label:MonitorStatus" msgid "In maintenance. Please check the printer" msgstr "Karbantartás alatt. Ellenőrizze a nyomtatót" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144 msgctxt "@label:MonitorStatus" msgid "Lost connection with the printer" msgstr "Elveszett a kapcsolat a nyomtatóval" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146 msgctxt "@label:MonitorStatus" msgid "Printing..." msgstr "Nyomtatás..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149 msgctxt "@label:MonitorStatus" msgid "Paused" msgstr "Felfüggsztve" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152 msgctxt "@label:MonitorStatus" msgid "Preparing..." msgstr "Előkészítés..." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154 msgctxt "@label:MonitorStatus" msgid "Please remove the print" msgstr "Távolítsa el a tárgyat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325 msgctxt "@label" msgid "Abort Print" msgstr "Nyomtatás megszakítás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337 msgctxt "@label" msgid "Are you sure you want to abort the print?" msgstr "Biztosan meg akarod szakítani a nyomtatást?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114 msgctxt "@label" msgid "Is printed as support." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117 msgctxt "@label" msgid "Other models overlapping with this model are modified." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120 msgctxt "@label" msgid "Infill overlapping with this model is modified." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123 msgctxt "@label" msgid "Overlaps with this model are not supported." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130 msgctxt "@label %1 is the number of settings it overrides." msgid "Overrides %1 setting." msgid_plural "Overrides %1 settings." msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59 msgctxt "@label" msgid "Object list" msgstr "Objektum lista" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137 msgctxt "@label" msgid "Interface" msgstr "Interfész" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216 msgctxt "@label" msgid "Currency:" msgstr "Pénznem:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229 msgctxt "@label" msgid "Theme:" msgstr "Téma:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285 msgctxt "@label" msgid "You will need to restart the application for these changes to have effect." msgstr "A módosítások érvénybe lépéséhez újra kell indítania az alkalmazást." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Automatikus újraszeletelés, ha a beállítások megváltoznak." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310 msgctxt "@option:check" msgid "Slice automatically" msgstr "Automatikus szeletelés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324 msgctxt "@label" msgid "Viewport behavior" msgstr "A nézetablak viselkedése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Jelölje meg pirossal azokat a területeket, amiket szükséges alátámasztani.Ha ezeket a részeket nem támasztjuk alá, a nyomtatás nem lesz hibátlan." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341 msgctxt "@option:check" msgid "Display overhang" msgstr "Túlnyúlás kijelzése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360 msgctxt "@option:check" msgid "Display model errors" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "A kamerát úgy mozgatja, hogy a modell kiválasztásakor, az a nézet középpontjában legyen" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Kamera középre, mikor az elem ki van választva" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "Megfordítsuk-e az alapértelmezett Zoom viselkedését?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Fordítsa meg a kamera zoom irányát." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "A nagyítás az egér mozgatásának irányában mozogjon?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "Az egér felé történő nagyítás ortográfiai szempontból nem támogatott." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Nagyítás az egér mozgás irányában" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Az alapsíkon lévő modelleket elmozgassuk úgy, hogy ne keresztezzék egymást?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "A modellek egymástól való távtartásának biztosítása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "A modelleket mozgatni kell lefelé, hogy érintsék a tárgyasztalt?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Modellek automatikus tárgyasztalra illesztése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "Figyelmeztető üzenet megjelenítése g-kód olvasóban." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "Figyelmeztető üzenet a g-code olvasóban" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "Kényszerítsük a réteget kompatibilitási módba ?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "A rétegnézet kompatibilis módjának kényszerítése (újraindítás szükséges)" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503 msgctxt "@option:check" msgid "Restore window position on start" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "Milyen fípusú fényképezőgépet használunk?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520 msgctxt "@window:text" msgid "Camera rendering:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531 msgid "Perspective" msgstr "Perspetívikus" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532 msgid "Orthographic" msgstr "Merőleges" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563 msgctxt "@label" msgid "Opening and saving files" msgstr "Fájlok megnyitása és mentése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "A modelleket átméretezzük a maximális építési méretre, ha azok túl nagyok?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590 msgctxt "@option:check" msgid "Scale large models" msgstr "Nagy modellek átméretezése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Egy adott modell rendkívül kicsinek tűnhet, ha mértékegysége például méterben van, nem pedig milliméterben. Ezeket a modelleket átméretezzük?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Extrém kicsi modellek átméretezése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "Betöltés után a modellek legyenek kiválasztva?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620 msgctxt "@option:check" msgid "Select models when loaded" msgstr "Modell kiválasztása betöltés után" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "A nyomtató nevét, mint előtagot, hozzáadjuk a nyomtatási feladat nevéhez?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Gépnév előtagként a feladatnévben" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Mutassuk az összegzést a projekt mentésekor?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Összegzés megjelenítése projekt mentésekor" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor: " #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "Mindig kérdezz" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Projektként való megnyitás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683 msgctxt "@option:openProject" msgid "Always import models" msgstr "Importálja a modelleket" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Ha módosított egy profilt, és váltott egy másikra, akkor megjelenik egy párbeszédpanel, amelyben megkérdezi, hogy meg kívánja-e tartani a módosításokat, vagy nem. Vagy választhat egy alapértelmezett viselkedést, és soha többé nem jeleníti meg ezt a párbeszédablakot." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52 msgctxt "@label" msgid "Profiles" msgstr "Profilok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "Alapértelmezett viselkedés a megváltozott beállítási értékeknél, ha másik profilra vált: " #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "Megváltozott beállítások elvetése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "Megváltozott beállítások alkalmazása az új profilba" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783 msgctxt "@label" msgid "Privacy" msgstr "Magán" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "A Cura-nak ellenőriznie kell-e a frissítéseket a program indításakor?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Keressen frissítéseket az induláskor" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Elküldjük a nyomtatott adatokat név nélkül az Ultimaker-nek?Semmilyen személyes infromáció, IP cím vagy azonosító nem kerül elküldésre." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "Név nélküli információ küldés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819 msgctxt "@action:button" msgid "More information" msgstr "Több információ" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84 msgctxt "@action:button" msgid "Activate" msgstr "Aktivál" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152 msgctxt "@action:button" msgid "Rename" msgstr "Átnevezés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126 msgctxt "@action:button" msgid "Create" msgstr "Létrehoz" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141 msgctxt "@action:button" msgid "Duplicate" msgstr "Másolat" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167 msgctxt "@action:button" msgid "Import" msgstr "Import" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179 msgctxt "@action:button" msgid "Export" msgstr "Export" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234 msgctxt "@action:label" msgid "Printer" msgstr "Nyomtató" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274 msgctxt "@title:window" msgid "Confirm Remove" msgstr "Eltávolítás megerősítése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "Biztosan el akarod távolítani %1 -et? Ez nem vonható vissza!" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323 msgctxt "@title:window" msgid "Import Material" msgstr "Alapanyag importálás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" msgstr "Nem sikerült importálni az alapanyagot %1: %2" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "Sikeres alapanyag import %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354 msgctxt "@title:window" msgid "Export Material" msgstr "Alapanyag export" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" msgstr "Sikertelen alapanyag export %1: %2" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" msgstr "Sikeres alapanyag export %1 -ba" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72 msgctxt "@title" msgid "Information" msgstr "Információ" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101 msgctxt "@title:window" msgid "Confirm Diameter Change" msgstr "Új átmérő megerősítése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102 msgctxt "@label (%1 is a number)" msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128 msgctxt "@label" msgid "Display Name" msgstr "Megjelenítendő név" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148 msgctxt "@label" msgid "Material Type" msgstr "Alapanyag típus" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158 msgctxt "@label" msgid "Color" msgstr "Szín" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208 msgctxt "@label" msgid "Properties" msgstr "Tulajdonságok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210 msgctxt "@label" msgid "Density" msgstr "Sűrűség" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225 msgctxt "@label" msgid "Diameter" msgstr "Átmérő" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259 msgctxt "@label" msgid "Filament Cost" msgstr "Nyomtatószál költség" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276 msgctxt "@label" msgid "Filament weight" msgstr "Nyomtatószál súly" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294 msgctxt "@label" msgid "Filament length" msgstr "Nyomtatószál hossz" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303 msgctxt "@label" msgid "Cost per Meter" msgstr "Költség / méter" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317 msgctxt "@label" msgid "This material is linked to %1 and shares some of its properties." msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324 msgctxt "@label" msgid "Unlink Material" msgstr "Alapanyag leválasztása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335 msgctxt "@label" msgid "Description" msgstr "Leírás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348 msgctxt "@label" msgid "Adhesion Information" msgstr "Tapadási információ" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 msgctxt "@label" msgid "Print settings" msgstr "Nyomtatási beállítások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104 msgctxt "@label" msgid "Create" msgstr "Létrehozás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121 msgctxt "@label" msgid "Duplicate" msgstr "Másolás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202 msgctxt "@title:window" msgid "Create Profile" msgstr "Profil készítés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204 msgctxt "@info" msgid "Please provide a name for this profile." msgstr "Adjon nevet ehhez a profilhoz." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260 msgctxt "@title:window" msgid "Duplicate Profile" msgstr "Profil másolása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291 msgctxt "@title:window" msgid "Rename Profile" msgstr "Profil átnevezés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304 msgctxt "@title:window" msgid "Import Profile" msgstr "Profil importálás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333 msgctxt "@title:window" msgid "Export Profile" msgstr "Profil exportálás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396 msgctxt "@label %1 is printer name" msgid "Printer: %1" msgstr "Nyomtató: %1" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554 msgctxt "@action:button" msgid "Update profile with current settings/overrides" msgstr "Frissítse a profilt az aktuális beállításokkal/felülbírálásokkal" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244 msgctxt "@action:button" msgid "Discard current changes" msgstr "A jelenlegi változások elvetése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580 msgctxt "@action:label" msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." msgstr "Ez a profil a nyomtató által megadott alapértelmezéseket használja, tehát az alábbi listában nincs egyetlen beállítás módosítás sem." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588 msgctxt "@action:label" msgid "Your current settings match the selected profile." msgstr "Az Ön aktuális beállításai megegyeznek a kiválasztott profillal." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606 msgctxt "@title:tab" msgid "Global Settings" msgstr "Általános beállítások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61 msgctxt "@info:status" msgid "Calculated" msgstr "Számított" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75 msgctxt "@title:column" msgid "Setting" msgstr "Beállítás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82 msgctxt "@title:column" msgid "Profile" msgstr "Profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89 msgctxt "@title:column" msgid "Current" msgstr "Jelenlegi" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97 msgctxt "@title:column" msgid "Unit" msgstr "Egység" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14 msgctxt "@title:tab" msgid "Setting Visibility" msgstr "Láthatóság beállítása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46 msgctxt "@label:textbox" msgid "Check all" msgstr "Mindent ellenőrizni" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41 msgctxt "@label" msgid "Extruder" msgstr "Extruder" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." msgstr "A nyomtatófej célhőmérséklete. A fűtőblokk hőmérséklete a beállított értékre fog melegedni, vagy éppen hűlni. Ha ez az érték 0, akkor a fejfűtés ki fog kapcsolni." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "Ennek a fejnek a jelenlegi hőmérséklete." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "A nyomtatófej előmelegítési hőmérséklete." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Elvet" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335 msgctxt "@button" msgid "Pre-heat" msgstr "Előfűtés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370 msgctxt "@tooltip of pre-heat" msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." msgstr "A nyomtatófejet a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "Az alapanyag színe ennél az extrudernél." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "Az alapanyag ebben az extruderben." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "A fúvóka be van építve az extruderbe." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26 msgctxt "@label" msgid "Build plate" msgstr "Tárgyasztal" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56 msgctxt "@tooltip" msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." msgstr "A fűthető ágy beállítható célhőmérséklete. Ha beállítjuk ezt az értéket a tálca elkezd erre a hőmérsékletre melegedni, vagy éppen lehűlni. Ha az érték 0 a tálcafűtés kikapcsol." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "A fűthető ágy aktuális hőmérséklete." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "A tálca előmelegítési hőmérséklete." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361 msgctxt "@tooltip of pre-heat" msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." msgstr "A fűthető tálcát, a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52 msgctxt "@label" msgid "Printer control" msgstr "Nyomtató vezérlés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67 msgctxt "@label" msgid "Jog Position" msgstr "Léptetőgomb pozíció" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85 msgctxt "@label" msgid "X/Y" msgstr "X/Y" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192 msgctxt "@label" msgid "Z" msgstr "Z" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Jog Distance" msgstr "Léptetőgomb távolság" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301 msgctxt "@label" msgid "Send G-code" msgstr "G-kód küldés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365 msgctxt "@tooltip of G-code command input" msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." msgstr "Küldjön egy egyéni G-kód parancsot a csatlakoztatott nyomtatóra. A parancs elküldéséhez nyomja meg az 'enter' gombot." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55 msgctxt "@info:status" msgid "The printer is not connected." msgstr "A nyomtató nincs csatlakoztatva." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 msgctxt "@status" msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 msgctxt "@status" msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please check your internet connection." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238 msgctxt "@button" msgid "Add printer" msgstr "Nyomtató hozzáadása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255 msgctxt "@button" msgid "Manage printers" msgstr "Nyomtatók kezelése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 msgctxt "@label" msgid "Connected printers" msgstr "Csatlakoztatott nyomtatók" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19 msgctxt "@label" msgid "Preset printers" msgstr "Előre beállított nyomtatók" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140 msgctxt "@label" msgid "Active print" msgstr "Aktív nyomtatás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148 msgctxt "@label" msgid "Job Name" msgstr "Feladat név" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156 msgctxt "@label" msgid "Printing Time" msgstr "Nyomtatási idő" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164 msgctxt "@label" msgid "Estimated time left" msgstr "Becsült hátralévő idő" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47 msgctxt "@label" msgid "Profile" msgstr "Profil" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170 msgctxt "@tooltip" msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." msgstr "" "Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n" "\n" "Kattints, hogy megnyisd a profil menedzsert." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146 msgctxt "@label:header" msgid "Custom profiles" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" msgstr[0] "" msgstr[1] "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21 msgctxt "@label shown when we load a Gcode file" msgid "Print setup disabled. G-code file can not be modified." msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144 msgctxt "@button" msgid "Recommended" msgstr "Ajánlott" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158 msgctxt "@button" msgid "Custom" msgstr "Egyéni" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 msgctxt "@label:Should be short" msgid "On" msgstr "Be" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 msgctxt "@label:Should be short" msgid "Off" msgstr "Ki" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33 msgctxt "@label" msgid "Experimental" msgstr "Tapasztalati" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29 msgctxt "@label" msgid "Adhesion" msgstr "Letapadás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74 msgctxt "@label" msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." msgstr "Engedélyezze a peremet, vagy az aláúsztatást. Ez létre fog hozni a test szélén illetve az alján egy olyan részt, ami segíti a letapadást, viszont nyomtatás után ezek könnyen eltávolíthatóak a testről." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193 msgctxt "@label" msgid "Gradual infill" msgstr "Fokozatos kitöltés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232 msgctxt "@label" msgid "Gradual infill will gradually increase the amount of infill towards the top." msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81 msgctxt "@tooltip" msgid "You have modified some profile settings. If you want to change these go to custom mode." msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30 msgctxt "@label" msgid "Support" msgstr "Támasz" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71 msgctxt "@label" msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." msgstr "A támasz létrehozása segíti a modell kinyúló részeinek hibátlan nyomatását. Támasz nélkül, ezek a részek összeomlanak, és nem lehetséges a hibátlan nyomtatás." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200 msgctxt "@label" msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." msgstr "" "Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n" "\n" "Kattints, hogy ezek a beállítások láthatók legyenek." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81 msgctxt "@label" msgid "This setting is not used because all the settings that it influences are overridden." msgstr "Ezt a beállítást nem használjuk, mert minden ezen beállítással befolyásolt egyéb beállítás értéke felül van bírálva." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "Befolyásolások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "Befolyásolja" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." msgstr "Ezt a beállítást megoszta az összes extruder között. Az itt megváltoztatott értékek az összes extrudernél meg fognak változni." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." msgstr "" "Ennek a beállításnak az értéke eltér a profilban megadottól.\n" "\n" "Kattintson a profil értékének visszaállításához." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." msgstr "" "Ez az érték általában kalulálva van, de jelenleg abszolút értékre van beállítva \n" "\n" "Kattintson, hogy visszaállítsuk a kalkulált értéket." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68 msgctxt "@label:textbox" msgid "Search settings" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456 msgctxt "@action:menu" msgid "Copy value to all extruders" msgstr "Értékek másolása minden extruderre" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465 msgctxt "@action:menu" msgid "Copy all changed values to all extruders" msgstr "Minden változott érték másolása minden extruderre" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502 msgctxt "@action:menu" msgid "Hide this setting" msgstr "Beállítás elrejtése" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515 msgctxt "@action:menu" msgid "Don't show this setting" msgstr "Ne jelenítsd meg ezt a beállítást" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519 msgctxt "@action:menu" msgid "Keep this setting visible" msgstr "Beállítás látható marad" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27 msgctxt "@info:tooltip" msgid "3D View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40 msgctxt "@info:tooltip" msgid "Front View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53 msgctxt "@info:tooltip" msgid "Top View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66 msgctxt "@info:tooltip" msgid "Left View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79 msgctxt "@info:tooltip" msgid "Right View" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50 msgctxt "@label" msgid "View type" msgstr "Nézet típus" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" msgid "Add a Cloud printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74 msgctxt "@label" msgid "Waiting for Cloud response" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86 msgctxt "@label" msgid "No printers found in your account?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121 msgctxt "@label" msgid "The following printers in your account have been added in Cura:" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204 msgctxt "@button" msgid "Add printer manually" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218 msgctxt "@button" msgid "Finish" msgstr "Befejezés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230 msgctxt "@label" msgid "Manufacturer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247 msgctxt "@label" msgid "Profile author" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265 msgctxt "@label" msgid "Printer name" msgstr "Nyomtató név" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274 msgctxt "@text" msgid "Please name your printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 msgctxt "@label" msgid "Add a printer" msgstr "Nyomtató hozzáadása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39 msgctxt "@label" msgid "Add a networked printer" msgstr "Hálózati nyomtató hozzáadása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90 msgctxt "@label" msgid "Add a non-networked printer" msgstr "Helyi nyomtató hozzáadása" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 msgctxt "@label" msgid "There is no printer found over your network." msgstr "A hálózaton nem található nyomtató." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182 msgctxt "@label" msgid "Refresh" msgstr "Frissítés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193 msgctxt "@label" msgid "Add printer by IP" msgstr "Nyomtató hozzáadása IP címmel" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204 msgctxt "@label" msgid "Add cloud printer" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240 msgctxt "@label" msgid "Troubleshooting" msgstr "Hibaelhárítás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" msgid "Add printer by IP address" msgstr "Nyomtató hozzáadása IP címmel" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133 msgctxt "@text" msgid "Enter your printer's IP address." msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158 msgctxt "@button" msgid "Add" msgstr "Hozzáad" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206 msgctxt "@label" msgid "Could not connect to device." msgstr "Nem sikerült csatlakozni az eszközhöz." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 msgctxt "@label" msgid "Can't connect to your Ultimaker printer?" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211 msgctxt "@label" msgid "The printer at this address has not responded yet." msgstr "Az ezen a címen található nyomtató még nem válaszolt." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245 msgctxt "@label" msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 msgctxt "@button" msgid "Back" msgstr "Vissza" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347 msgctxt "@button" msgid "Connect" msgstr "Csatlakozás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43 msgctxt "@label" msgid "Ultimaker Account" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84 msgctxt "@text" msgid "Your key to connected 3D printing" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101 msgctxt "@text" msgid "- Customize your experience with more print profiles and plugins" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104 msgctxt "@text" msgid "- Stay flexible by syncing your setup and loading it anywhere" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107 msgctxt "@text" msgid "- Increase efficiency with a remote workflow on Ultimaker printers" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157 msgctxt "@button" msgid "Skip" msgstr "" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 msgctxt "@label" msgid "Help us to improve Ultimaker Cura" msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57 msgctxt "@text" msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71 msgctxt "@text" msgid "Machine types" msgstr "Géptípusok" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77 msgctxt "@text" msgid "Material usage" msgstr "Anyagfelhasználás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83 msgctxt "@text" msgid "Number of slices" msgstr "Szeletek száma" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89 msgctxt "@text" msgid "Print settings" msgstr "Nyomtatási beállítások" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102 msgctxt "@text" msgid "Data collected by Ultimaker Cura will not contain any personal information." msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103 msgctxt "@text" msgid "More information" msgstr "Több információ" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 msgctxt "@label" msgid "Empty" msgstr "Üres" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 msgctxt "@label" msgid "User Agreement" msgstr "Felhasználói Szerződés" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70 msgctxt "@button" msgid "Decline and close" msgstr "Elutasítás és bezárás" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29 msgctxt "@label" msgid "Welcome to Ultimaker Cura" msgstr "Üdvözöljük az Ultimaker Cura-ban" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47 msgctxt "@text" msgid "" "Please follow these steps to set up\n" "Ultimaker Cura. This will only take a few moments." msgstr "" "Kéjük, kövesd a következő lépéseket\n" "az Ultimaker Cura beállításához. Pár pillanat az egész." #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58 msgctxt "@button" msgid "Get started" msgstr "Kezdj hozzá" #: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24 msgctxt "@label" msgid "What's new in Ultimaker Cura" msgstr "Újdonságok az Ultimaker Cura-ban" #: ModelChecker/plugin.json msgctxt "description" msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad." #: ModelChecker/plugin.json msgctxt "name" msgid "Model Checker" msgstr "Modell-ellenőrző" #: 3MFReader/plugin.json msgctxt "description" msgid "Provides support for reading 3MF files." msgstr "Támogatást nyújt a 3MF fájlok olvasásához." #: 3MFReader/plugin.json msgctxt "name" msgid "3MF Reader" msgstr "3MF olvasó" #: 3MFWriter/plugin.json msgctxt "description" msgid "Provides support for writing 3MF files." msgstr "Támogatást nyújt a 3MF fájlok írásához." #: 3MFWriter/plugin.json msgctxt "name" msgid "3MF Writer" msgstr "3MF író" #: AMFReader/plugin.json msgctxt "description" msgid "Provides support for reading AMF files." msgstr "Támogatást nyújt az AMF fájlok olvasásához." #: AMFReader/plugin.json msgctxt "name" msgid "AMF Reader" msgstr "AMF Olvasó" #: CuraDrive/plugin.json msgctxt "description" msgid "Backup and restore your configuration." msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása." #: CuraDrive/plugin.json msgctxt "name" msgid "Cura Backups" msgstr "Cura biztonsági mentések" #: CuraEngineBackend/plugin.json msgctxt "description" msgid "Provides the link to the CuraEngine slicing backend." msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz." #: CuraEngineBackend/plugin.json msgctxt "name" msgid "CuraEngine Backend" msgstr "CuraEngine motor" #: CuraProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing Cura profiles." msgstr "Támogatást nyújt a Cura profilok importálásához." #: CuraProfileReader/plugin.json msgctxt "name" msgid "Cura Profile Reader" msgstr "Cura profil olvasó" #: CuraProfileWriter/plugin.json msgctxt "description" msgid "Provides support for exporting Cura profiles." msgstr "Támogatást nyújt a Cura profilok exportálásához." #: CuraProfileWriter/plugin.json msgctxt "name" msgid "Cura Profile Writer" msgstr "Cura profil író" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." msgstr "Ellenőrzi a firmware frissítéseket." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" msgstr "Frimrware frissítés ellenőrző" #: FirmwareUpdater/plugin.json msgctxt "description" msgid "Provides a machine actions for updating firmware." msgstr "Gépi funkciókat biztosít a firmware frissítéséhez." #: FirmwareUpdater/plugin.json msgctxt "name" msgid "Firmware Updater" msgstr "Firmware frissítő" #: GCodeGzReader/plugin.json msgctxt "description" msgid "Reads g-code from a compressed archive." msgstr "Olvassa be a g-kódot egy tömörített archívumból." #: GCodeGzReader/plugin.json msgctxt "name" msgid "Compressed G-code Reader" msgstr "Tömörített G-kód olvasó" #: GCodeGzWriter/plugin.json msgctxt "description" msgid "Writes g-code to a compressed archive." msgstr "G-kódot ír egy tömörített archívumba." #: GCodeGzWriter/plugin.json msgctxt "name" msgid "Compressed G-code Writer" msgstr "Tömörített G-kód író" #: GCodeProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from g-code files." msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához." #: GCodeProfileReader/plugin.json msgctxt "name" msgid "G-code Profile Reader" msgstr "G-kód profil olvasó" #: GCodeReader/plugin.json msgctxt "description" msgid "Allows loading and displaying G-code files." msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését." #: GCodeReader/plugin.json msgctxt "name" msgid "G-code Reader" msgstr "G-kód olvasó" #: GCodeWriter/plugin.json msgctxt "description" msgid "Writes g-code to a file." msgstr "G-kódot ír fájlba." #: GCodeWriter/plugin.json msgctxt "name" msgid "G-code Writer" msgstr "G-kódot író" #: ImageReader/plugin.json msgctxt "description" msgid "Enables ability to generate printable geometry from 2D image files." msgstr "Lehetővé teszi a nyomtatható geometria létrehozását 2D-képfájlokból." #: ImageReader/plugin.json msgctxt "name" msgid "Image Reader" msgstr "Kép olvasó" #: LegacyProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from legacy Cura versions." msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból." #: LegacyProfileReader/plugin.json msgctxt "name" msgid "Legacy Cura Profile Reader" msgstr "Örökölt Cura profil olvasó" #: MachineSettingsAction/plugin.json msgctxt "description" msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)" #: MachineSettingsAction/plugin.json msgctxt "name" msgid "Machine Settings Action" msgstr "" #: MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." msgstr "Monitor nézetet biztosít a Cura -ban." #: MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" msgstr "Monitor nézet" #: PerObjectSettingsTool/plugin.json msgctxt "description" msgid "Provides the Per Model Settings." msgstr "Biztosítja a modellenkénti beállításokat." #: PerObjectSettingsTool/plugin.json msgctxt "name" msgid "Per Model Settings Tool" msgstr "Modellenkénti beállítás-eszköz" #: PostProcessingPlugin/plugin.json msgctxt "description" msgid "Extension that allows for user created scripts for post processing" msgstr "Bővítmény, amely lehetővé teszi a felhasználó által létrehozott szkriptek utófeldolgozást" #: PostProcessingPlugin/plugin.json msgctxt "name" msgid "Post Processing" msgstr "Utólagos feldolgozás" #: PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." msgstr "Biztosítja az előkészítés nézetet a Cura-ban." #: PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" msgstr "Előkészítés nézet" #: PreviewStage/plugin.json msgctxt "description" msgid "Provides a preview stage in Cura." msgstr "Előnézet biztosítása a Cura -ban." #: PreviewStage/plugin.json msgctxt "name" msgid "Preview Stage" msgstr "Előnézet" #: RemovableDriveOutputDevice/plugin.json msgctxt "description" msgid "Provides removable drive hotplugging and writing support." msgstr "Támogatás a cserélhető meghajtók üzem közbeni cseréjét és írását." #: RemovableDriveOutputDevice/plugin.json msgctxt "name" msgid "Removable Drive Output Device Plugin" msgstr "Cserélhető meghajtók kimeneti beépülője" #: SentryLogger/plugin.json msgctxt "description" msgid "Logs certain events so that they can be used by the crash reporter" msgstr "" #: SentryLogger/plugin.json msgctxt "name" msgid "Sentry Logger" msgstr "" #: SimulationView/plugin.json msgctxt "description" msgid "Provides the Simulation view." msgstr "Szimulációs nézetet biztosít." #: SimulationView/plugin.json msgctxt "name" msgid "Simulation View" msgstr "Szimulációs nézet" #: SliceInfoPlugin/plugin.json msgctxt "description" msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható." #: SliceInfoPlugin/plugin.json msgctxt "name" msgid "Slice info" msgstr "Szeletelési infó" #: SolidView/plugin.json msgctxt "description" msgid "Provides a normal solid mesh view." msgstr "Felületi háló nézetet biztosít." #: SolidView/plugin.json msgctxt "name" msgid "Solid View" msgstr "Felület nézet" #: SupportEraser/plugin.json msgctxt "description" msgid "Creates an eraser mesh to block the printing of support in certain places" msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását" #: SupportEraser/plugin.json msgctxt "name" msgid "Support Eraser" msgstr "Támasz törlő" #: Toolbox/plugin.json msgctxt "description" msgid "Find, manage and install new Cura packages." msgstr "Keressen, kezeljen és telepítsen új Cura csomagokat." #: Toolbox/plugin.json msgctxt "name" msgid "Toolbox" msgstr "Eszköztár" #: TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." msgstr "Támogatást nyújt a modellfájlok olvasásához." #: TrimeshReader/plugin.json msgctxt "name" msgid "Trimesh Reader" msgstr "Trimesh olvasó" #: UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához." #: UFPReader/plugin.json msgctxt "name" msgid "UFP Reader" msgstr "UFP Olvasó" #: UFPWriter/plugin.json msgctxt "description" msgid "Provides support for writing Ultimaker Format Packages." msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához." #: UFPWriter/plugin.json msgctxt "name" msgid "UFP Writer" msgstr "UFP Író" #: UltimakerMachineActions/plugin.json msgctxt "description" msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)" #: UltimakerMachineActions/plugin.json msgctxt "name" msgid "Ultimaker machine actions" msgstr "Ultimaker gépi funkciók" #: UM3NetworkPrinting/plugin.json msgctxt "description" msgid "Manages network connections to Ultimaker networked printers." msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz." #: UM3NetworkPrinting/plugin.json msgctxt "name" msgid "Ultimaker Network Connection" msgstr "Ultimaker hálózati kapcsolat" #: USBPrinting/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti." #: USBPrinting/plugin.json msgctxt "name" msgid "USB printing" msgstr "USB nyomtatás" #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re." #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" msgid "Version Upgrade 2.1 to 2.2" msgstr "A 2.1-es verzió frissítése 2.2-re" #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re." #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "A 2.2-es verzió frissítése 2.4-ig" #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra." #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" msgid "Version Upgrade 2.5 to 2.6" msgstr "A 2.5-es verzió frissítése 2.6-ra" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re." #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" msgid "Version Upgrade 2.6 to 2.7" msgstr "A 2.6-os verzió frissítése 2.7-re" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "A 2.7-es verzió frissítése 3.0-ra" #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re." #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" msgid "Version Upgrade 3.0 to 3.1" msgstr "A 3.0-s verzió frissítése 3.1-re" #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "A konfigurációk frissítése Cura 3.2-ről Cura 3.3-ra." #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "A 3.2-es verzió frissítése 3.3-ra" #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re." #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "A 3.3-as verzió frissítése 3.4-re" #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "A konfigurációt Cura 3.4-ről Cura 3.5-re frissíti." #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "A 3.4-es verzió frissítése 3.5-re" #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra." #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" msgid "Version Upgrade 3.5 to 4.0" msgstr "A 3.5-es verzió frissítése 4.0-ra" #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti." #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" msgid "Version Upgrade 4.0 to 4.1" msgstr "A 4.0-s verzió frissítése 4.1-re" #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re." #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" msgid "Version Upgrade 4.1 to 4.2" msgstr "A 4.1-es verzió frissítése 4.2-re" #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "A konfigurációk frissítése Cura 4.2-ről Cura 4.3-ra." #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" msgid "Version Upgrade 4.2 to 4.3" msgstr "A 4.2-es verzió frissítése 4.3-ra" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" msgid "Version Upgrade 4.3 to 4.4" msgstr "" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" msgid "Version Upgrade 4.4 to 4.5" msgstr "" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" msgid "Version Upgrade 4.5 to 4.6" msgstr "" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.2 to 4.7" msgstr "" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" msgid "Version Upgrade 4.7 to 4.8" msgstr "" #: X3DReader/plugin.json msgctxt "description" msgid "Provides support for reading X3D files." msgstr "Támogatást nyújt az X3D fájlok olvasásához." #: X3DReader/plugin.json msgctxt "name" msgid "X3D Reader" msgstr "X3D Olvasó" #: XmlMaterialProfile/plugin.json msgctxt "description" msgid "Provides capabilities to read and write XML-based material profiles." msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását." #: XmlMaterialProfile/plugin.json msgctxt "name" msgid "Material Profiles" msgstr "Alapanyag profilok" #: XRayView/plugin.json msgctxt "description" msgid "Provides the X-Ray view." msgstr "Röntgen nézetet biztosít." #: XRayView/plugin.json msgctxt "name" msgid "X-Ray View" msgstr "Röntgen nézet" #~ msgctxt "@info:status" #~ msgid "The selected model was too small to load." #~ msgstr "A kiválasztott tárgy túl kicsi volt a betöltéshez." #~ msgctxt "@info:status" #~ msgid "Successfully imported profile {0}" #~ msgstr "Sikeres profil importálás {0}" #~ msgctxt "@info:status" #~ msgid "Could not find a quality type {0} for the current configuration." #~ msgstr "Nem található a (z) {0} minőségi típus az aktuális konfigurációhoz." #~ msgctxt "@action:ComboBox option" #~ msgid "Update" #~ msgstr "Frissítés" #~ msgctxt "@action:ComboBox option" #~ msgid "Create new" #~ msgstr "Új létrehozása" #~ msgctxt "@info" #~ msgid "The webcam is not available because you are monitoring a cloud printer." #~ msgstr "A webkamera nem érhető el, mert felhőben lévő nyomtatót szeretne figyelni." #~ msgctxt "@text" #~ msgid "Please give your printer a name" #~ msgstr "Adja meg a nyomtató nevét" #~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" #~ msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer." #~ msgstr "Új funkciók érhetők el a (z) {machine_name} készülékken! Javasoljuk, hogy frissítse a nyomtató firmware-jét." #~ msgctxt "@action:button" #~ msgid "Print via Cloud" #~ msgstr "Nyomtatás felhőn keresztül" #~ msgctxt "@properties:tooltip" #~ msgid "Print via Cloud" #~ msgstr "Nyomtatás felhőn keresztül" #~ msgctxt "@info:status" #~ msgid "Connected via Cloud" #~ msgstr "Csatlakozás felhőn keresztül" #~ msgctxt "@info:status Ultimaker Cloud should not be translated." #~ msgid "Connect to Ultimaker Cloud" #~ msgstr "Csatlakozás az Ultimaker felhőhöz" #~ msgctxt "@label" #~ msgid "You need to install the package before you can rate" #~ msgstr "Mielőtt értékelni tudná, telepítenie kell a csomagot" #~ msgctxt "@label" #~ msgid "ratings" #~ msgstr "értékelés" #~ msgctxt "@label" #~ msgid "Featured" #~ msgstr "Kiemelt" #~ msgctxt "@label" #~ msgid "Your rating" #~ msgstr "Értékelésed" #~ msgctxt "@label" #~ msgid "Author" #~ msgstr "Szerző" #~ msgctxt "@label The argument is a username." #~ msgid "Hi %1" #~ msgstr "Szia %1" #~ msgctxt "@button" #~ msgid "Ultimaker account" #~ msgstr "Ultimaker fiók" #~ msgctxt "@button" #~ msgid "Sign out" #~ msgstr "Kijelentkezés" #~ msgctxt "@label" #~ msgid "Support library for analysis of complex networks" #~ msgstr "Támogató könyvtár a komplex hálózatok elemzéséhez" #~ msgctxt "@Label" #~ msgid "Python HTTP library" #~ msgstr "Python HTTP könyvtár" #~ msgctxt "@text:window" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to keep or discard those settings?" #~ msgstr "" #~ "Van néhány testreszabott beállításod a profilban. \n" #~ "Szeretnéd ezeket megtartani, vagy eldobod őket?" #~ msgctxt "@title:column" #~ msgid "Default" #~ msgstr "Alapértelmezett" #~ msgctxt "@title:column" #~ msgid "Customized" #~ msgstr "Testreszabott" #~ msgctxt "@action:button" #~ msgid "Discard" #~ msgstr "Eldob" #~ msgctxt "@action:button" #~ msgid "Keep" #~ msgstr "Megtart" #~ msgctxt "@action:button" #~ msgid "Create New Profile" #~ msgstr "Új profil létrehozás" #~ msgctxt "@title:menu menubar:file" #~ msgid "&Save..." #~ msgstr "Mentés..." #~ msgctxt "@text" #~ msgid "Place enter your printer's IP address." #~ msgstr "Írja be a nyomtató IP címét." #~ msgctxt "@button" #~ msgid "Create an account" #~ msgstr "Fiók létrehozása" #~ msgctxt "@item:inmenu" #~ msgid "Flatten active settings" #~ msgstr "Aktív beállítások simítása" #~ msgctxt "@info:status" #~ msgid "Profile has been flattened & activated." #~ msgstr "A profil simítva és aktiválva." #~ msgctxt "X3g Writer Plugin Description" #~ msgid "Writes X3g to files" #~ msgstr "Írás X3g fájlba" #~ msgctxt "X3g Writer File Description" #~ msgid "X3g File" #~ msgstr "X3g fájl" #~ msgctxt "X3G Writer File Description" #~ msgid "X3G File" #~ msgstr "X3g fájl" #~ msgctxt "@info:status" #~ msgid "Cura does not accurately display layers when Wire Printing is enabled" #~ msgstr "A Cura nem jeleníti meg pontosan a rétegeket, ha a huzalnyomtatás engedélyezve van" #~ msgctxt "@item:inlistbox" #~ msgid "Open Compressed Triangle Mesh" #~ msgstr "Tömörített háromszög háló megnyitása" #~ msgctxt "@info:status" #~ msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder." #~ msgstr "Nem lehet szeletelni, mert egyik modell sem érintkezik az alapsíkkal, vagy a modell letiltott extruderhez van hozzárendelve. Kérjük, méretezze vagy forgassa el a modelleket, hogy illeszkedjenek az alapsíkra, vagy engedélyezz egy extrudert." #~ msgctxt "@info:backup_status" #~ msgid "There was an error listing your backups." #~ msgstr "Hiba történt a biztonsági mentések listázásánál." #~ msgctxt "@item:inmenu" #~ msgid "Profile Assistant" #~ msgstr "Profil segéd" #~ msgctxt "@item:inlistbox" #~ msgid "Profile Assistant" #~ msgstr "Profil segéd" #~ msgctxt "@label" #~ msgid "Pre-sliced file {0}" #~ msgstr "Elő szeletelt fájl {0}" #~ msgctxt "@action:button" #~ msgid "Retry" #~ msgstr "Újra" #~ msgctxt "@title:groupbox" #~ msgid "User description (Note: Developers may not speak your language, please use English if possible)" #~ msgstr "Felhasználói leírás (Megjegyzés: Lehet, hogy a fejlesztők nem beszélnek az Ön nyelvén,ezért kérjük, használja az Angol nyelvet, ha lehetséges.)" #~ msgctxt "@label" #~ msgid "Confirm" #~ msgstr "Jóváhagy" #~ msgctxt "@info:button" #~ msgid "Quit Cura" #~ msgstr "Kilépés a Cura-ból" #~ msgctxt "@label" #~ msgid "" #~ "This plugin contains a license.\n" #~ "You need to accept this license to install this plugin.\n" #~ "Do you agree with the terms below?" #~ msgstr "" #~ "A bővítmény telepítéséhez el kell fogadnia ezt a licencet. \n" #~ "Egyetért az alábbi feltételekkel?" #~ msgctxt "@action:button" #~ msgid "Accept" #~ msgstr "Elfogad" #~ msgctxt "@action:button" #~ msgid "Decline" #~ msgstr "Elutasít" #~ msgctxt "@label:table_header" #~ msgid "Print Core" #~ msgstr "Nyomtató motor" #~ msgctxt "@label:listbox" #~ msgid "Feedrate" #~ msgstr "Előtolás" #~ msgctxt "@info:tooltip" #~ msgid "Change active post-processing scripts" #~ msgstr "Állítsd aktívra az utó művelet szkriptet" #~ msgctxt "@label" #~ msgid "Don't support overlap with other models" #~ msgstr "Nem támogatott az egyéb modellekkel való átfedés" #~ msgctxt "@label" #~ msgid "Modify settings for overlap with other models" #~ msgstr "Módosítsa az egyéb modellekkel való átfedés beállítását" #~ msgctxt "@label" #~ msgid "Modify settings for infill of other models" #~ msgstr "Módosítsa a többi modell kitöltés beállításait" #~ msgctxt "@action:ComboBox option" #~ msgid "Update existing" #~ msgstr "Meglévő frissítése" #~ msgctxt "@label" #~ msgid "Not supported" #~ msgstr "Nem támogatott" #~ msgctxt "@action:button" #~ msgid "Previous" #~ msgstr "Előző" #~ msgctxt "@label" #~ msgid "Tip" #~ msgstr "Tipp" #~ msgctxt "@label" #~ msgid "Print experiment" #~ msgstr "Nyomtatási kísérlet" #~ msgctxt "@label" #~ msgid "Checklist" #~ msgstr "Ellenőrző lista" #~ msgctxt "@label" #~ msgid "Please select any upgrades made to this Ultimaker 2." #~ msgstr "Kérjük, válassza ki az Ultimaker 2 frissítéseit." #~ msgctxt "@label" #~ msgid "Olsson Block" #~ msgstr "Olsson blokk" #~ msgctxt "@label" #~ msgid "Language:" #~ msgstr "Nyelv:" #~ msgctxt "@window:text" #~ msgid "Camera rendering: " #~ msgstr "Kamera megjelenítés: " #~ msgctxt "@info:tooltip" #~ msgid "Use multi build plate functionality" #~ msgstr "Többrétegű tárgyasztal használata" #~ msgctxt "@option:check" #~ msgid "Use multi build plate functionality (restart required)" #~ msgstr "Többrétegű tárgyasztal használata (újraindítás szükséges)" #~ msgctxt "@label" #~ msgid "Default profiles" #~ msgstr "Alapértelemezett profil" #~ msgctxt "@label:textbox" #~ msgid "search settings" #~ msgstr "keresési beállítások" #~ msgctxt "@label" #~ msgid "The value is resolved from per-extruder values " #~ msgstr "Az értékek meghatározása az extruderek értékei alapján történik " #~ msgctxt "@label" #~ msgid "Layer Height" #~ msgstr "Réteg magasság" #~ msgctxt "@tooltip" #~ msgid "This quality profile is not available for your current material and nozzle configuration. Please change these to enable this quality profile." #~ msgstr "Ez a minőségi profil nem áll rendelkezésre a jelenlegi anyag- és fúvóka-konfigurációhoz. Kérjük, módosítsa ezeket a minőségprofil engedélyezéséhez." #~ msgctxt "@tooltip" #~ msgid "A custom profile is currently active. To enable the quality slider, choose a default quality profile in Custom tab" #~ msgstr "Az egyéni profil jelenleg aktív. A minőségi csúszka engedélyezéséhez válassza az alapértelmezett minőségi profilt az Egyéni lapon" #~ msgctxt "@title:menu" #~ msgid "&Build plate" #~ msgstr "&Tárgyasztal" #~ msgctxt "@title:settings" #~ msgid "&Profile" #~ msgstr "&Profil" #~ msgctxt "@action:inmenu" #~ msgid "Show All Settings" #~ msgstr "Minden beállítást mutat" #~ msgctxt "@title:menu menubar:file" #~ msgid "Export..." #~ msgstr "&Exportál..." #~ msgctxt "@label" #~ msgid "The next generation 3D printing workflow" #~ msgstr "A következő generációs 3D nyomtatási munkafolyamat" #~ msgctxt "@text" #~ msgid "" #~ "- Send print jobs to Ultimaker printers outside your local network\n" #~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n" #~ "- Get exclusive access to print profiles from leading brands" #~ msgstr "" #~ "- Nyomtatási feladatok küldése Ultimaker nyomtatóknak helyi hálózaton kívülről\n" #~ "- Tárolja az Ultimaker Cura beállításait felhőben, így az bárhonnan elérhető lesz\n" #~ "- Exklúzív hozzáférés a vezető nyomtató márkák nyomtatási profiljaikhoz" #~ msgctxt "@title:window" #~ msgid "Ultimaker Cura" #~ msgstr "Ultimaker Cura" #~ msgctxt "@title:window" #~ msgid "Closing Cura" #~ msgstr "Cura bezárása" #~ msgctxt "@label" #~ msgid "Are you sure you want to exit Cura?" #~ msgstr "Biztos, hogy kilépsz a Cura -ból?" #~ msgctxt "@title:window" #~ msgid "About Cura" #~ msgstr "A Cura -ról" #~ msgctxt "@action:label" #~ msgid "Build plate" #~ msgstr "Tárgyasztal" #~ msgctxt "@label" #~ msgid "Ultimaker Cloud" #~ msgstr "Ultimaker felhő" #~ msgctxt "@text" #~ msgid "The next generation 3D printing workflow" #~ msgstr "Következő generációs 3D nyomtatási munkafolyamat" #~ msgctxt "@text" #~ msgid "- Send print jobs to Ultimaker printers outside your local network" #~ msgstr "- Küldjön nyomtatási feladatokat az Ultimaker nyomtatóknak a helyi hálózaton kívülről" #~ msgctxt "@text" #~ msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere" #~ msgstr "- Tárolja az Ultimaker Cura beállításait a felhőben így azok bárhol használhatóak" #~ msgctxt "@text" #~ msgid "- Get exclusive access to print profiles from leading brands" #~ msgstr "- Exkluzív hozzáférés a vezető márkák nyomtatási profiljaihoz" #~ msgctxt "name" #~ msgid "Machine Settings action" #~ msgstr "Gépbeállítások művelete" #~ msgctxt "description" #~ msgid "Dump the contents of all settings to a HTML file." #~ msgstr "Az összes beállítás tartalmát HTML-fájlba teheti." #~ msgctxt "name" #~ msgid "God Mode" #~ msgstr "Isten mód" #~ msgctxt "description" #~ msgid "Create a flattened quality changes profile." #~ msgstr "Hozzon létre egy simított tulajdonságú profilt." #~ msgctxt "name" #~ msgid "Profile Flattener" #~ msgstr "Profil simító" #~ msgctxt "description" #~ msgid "Allows material manufacturers to create new material and quality profiles using a drop-in UI." #~ msgstr "Lehetővé teszi az anyaggyártók számára, hogy új anyag- és minőségi profilokat hozzanak létre egy beépülő felhasználói felület használatával." #~ msgctxt "name" #~ msgid "Print Profile Assistant" #~ msgstr "Nyomtatási profil-asszisztens"