# Cura # Copyright (C) 2021 Ultimaker B.V. # This file is distributed under the same license as the Cura package. # msgid "" msgstr "" "Project-Id-Version: Cura 4.13\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2022-04-13 10:49+0200\n" "PO-Revision-Date: 2021-09-07 08:01+0200\n" "Last-Translator: Lionbridge \n" "Language-Team: Dutch , Dutch \n" "Language: nl_NL\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Poedit 3.0\n" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" msgstr "Voorbereiden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura Profile" msgstr "Cura-profiel" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15 msgctxt "@item:inlistbox 'Open' is part of the name of this file format." msgid "Open Compressed Triangle Mesh" msgstr "Gecomprimeerde driehoeksnet openen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19 msgctxt "@item:inlistbox" msgid "COLLADA Digital Asset Exchange" msgstr "COLLADA Digital Asset Exchange" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23 msgctxt "@item:inlistbox" msgid "glTF Binary" msgstr "glTF-binair" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27 msgctxt "@item:inlistbox" msgid "glTF Embedded JSON" msgstr "glTF-ingesloten JSON" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36 msgctxt "@item:inlistbox" msgid "Stanford Triangle Format" msgstr "Stanford-driehoeksformaat" #: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40 msgctxt "@item:inlistbox" msgid "Compressed COLLADA Digital Asset Exchange" msgstr "Gecomprimeerde COLLADA Digital Asset Exchange" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127 msgctxt "@info" msgid "Could not access update information." msgstr "Geen toegang tot update-informatie." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}." msgstr "Er zijn mogelijk nieuwe functies of foutoplossingen beschikbaar voor uw {machine_name}. Als u dit nog niet hebt gedaan, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s stable firmware available" msgstr "Nieuwe stabiele firmware voor %s beschikbaar" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28 msgctxt "@action:button" msgid "How to update" msgstr "Instructies voor bijwerken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14 msgctxt "@item:inmenu" msgid "Monitor" msgstr "Controleren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." msgid "Save to Removable Drive" msgstr "Opslaan op verwisselbaar station" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24 #, python-brace-format msgctxt "@item:inlistbox" msgid "Save to Removable Drive {0}" msgstr "Opslaan op Verwisselbaar Station {0}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118 msgctxt "@info:status" msgid "There are no file formats available to write with!" msgstr "Er zijn geen bestandsindelingen beschikbaar om te schrijven!" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97 #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" msgstr "Opslaan op Verwisselbaar Station {0}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98 msgctxt "@info:title" msgid "Saving" msgstr "Opslaan" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108 #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" msgstr "Kan niet opslaan als {0}: {1}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." msgstr "Kan geen bestandsnaam vinden tijdens het schrijven naar {device}." #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159 #, python-brace-format msgctxt "@info:status" msgid "Could not save to removable drive {0}: {1}" msgstr "Kan niet opslaan op verwisselbaar station {0}: {1}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161 #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166 msgctxt "@info:title" msgid "Error" msgstr "Fout" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150 #, python-brace-format msgctxt "@info:status" msgid "Saved to Removable Drive {0} as {1}" msgstr "Opgeslagen op Verwisselbaar Station {0} als {1}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151 msgctxt "@info:title" msgid "File Saved" msgstr "Bestand opgeslagen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 msgctxt "@action:button" msgid "Eject" msgstr "Uitwerpen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153 #, python-brace-format msgctxt "@action" msgid "Eject removable device {0}" msgstr "Verwisselbaar station {0} uitwerpen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172 #, python-brace-format msgctxt "@info:status" msgid "Ejected {0}. You can now safely remove the drive." msgstr "{0} is uitgeworpen. U kunt het station nu veilig verwijderen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173 msgctxt "@info:title" msgid "Safely Remove Hardware" msgstr "Hardware veilig verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176 #, python-brace-format msgctxt "@info:status" msgid "Failed to eject {0}. Another program may be using the drive." msgstr "Uitwerpen van {0} is niet gelukt. Mogelijk wordt het station door een ander programma gebruikt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177 #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770 #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217 msgctxt "@info:title" msgid "Warning" msgstr "Waarschuwing" #: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76 msgctxt "@item:intext" msgid "Removable Drive" msgstr "Verwisselbaar Station" #: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15 msgctxt "@item:inlistbox" msgid "AMF File" msgstr "AMF-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28 msgctxt "@item:inlistbox" msgid "Ultimaker Format Package" msgstr "Ultimaker Format Package" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" msgid "Per Model Settings" msgstr "Instellingen per Model" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15 msgctxt "@info:tooltip" msgid "Configure Per Model Settings" msgstr "Instellingen per Model configureren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27 msgctxt "@action" msgid "Update Firmware" msgstr "Firmware bijwerken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24 #, python-brace-format msgctxt "@info:status" msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}." msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26 msgctxt "@info:title" msgid "Sending materials to printer" msgstr "De materialen worden naar de printer verzonden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27 #, python-brace-format msgctxt "@info:status" msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host." msgstr "U probeert verbinding te maken met {0}, maar deze is niet de host van een groep. U kunt de webpagina bezoeken om deze als groephost te configureren." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30 msgctxt "@info:title" msgid "Not a group host" msgstr "Geen groephost" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36 msgctxt "@action" msgid "Configure group" msgstr "Groep configureren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15 msgctxt "@info:status" msgid "Sending Print Job" msgstr "Printtaak verzenden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16 msgctxt "@info:status" msgid "Uploading print job to printer." msgstr "Printtaak naar printer aan het uploaden." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16 msgctxt "@info:status" msgid "Print job queue is full. The printer can't accept a new job." msgstr "Wachtrij voor afdruktaken is vol. De printer kan geen nieuwe taken accepteren." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17 msgctxt "@info:title" msgid "Queue Full" msgstr "Wachtrij vol" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15 msgctxt "@info:status" msgid "Please wait until the current job has been sent." msgstr "Wacht tot de huidige taak is verzonden." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16 msgctxt "@info:title" msgid "Print error" msgstr "Printfout" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15 msgctxt "@info:status" msgid "Print job was successfully sent to the printer." msgstr "De printtaak is naar de printer verzonden." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16 msgctxt "@info:title" msgid "Data Sent" msgstr "Gegevens verzonden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25 #, python-brace-format msgctxt "@info:status" msgid "" "Your printer {printer_name} could be connected via cloud.\n" " Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory" msgstr "" "U kunt uw printer {printer_name} via de cloud verbinden.\n" " Beheer uw printerwachtrij en controleer uw prints vanaf elke plek door uw printer te verbinden met Digital Factory" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26 msgctxt "@info:title" msgid "Are you ready for cloud printing?" msgstr "Bent u klaar voor printen via de cloud?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30 msgctxt "@action" msgid "Get started" msgstr "Aan de slag" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31 msgctxt "@action" msgid "Learn more" msgstr "Meer informatie" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18 msgctxt "@info:status" msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware." msgstr "U probeert verbinding te maken met een printer waarop Ultimaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21 msgctxt "@info:title" msgid "Update your printer" msgstr "Uw printer bijwerken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15 msgctxt "@info:text" msgid "Could not upload the data to the printer." msgstr "Kan de gegevens niet uploaden naar de printer." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16 msgctxt "@info:title" msgid "Network error" msgstr "Netwerkfout" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print over network" msgstr "Printen via netwerk" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59 msgctxt "@properties:tooltip" msgid "Print over network" msgstr "Printen via netwerk" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60 msgctxt "@info:status" msgid "Connected over the network" msgstr "Via het netwerk verbonden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27 msgctxt "@info:status" msgid "tomorrow" msgstr "morgen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30 msgctxt "@info:status" msgid "today" msgstr "vandaag" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28 msgctxt "@action" msgid "Connect via Network" msgstr "Verbinding Maken via Netwerk" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229 msgctxt "info:status" msgid "New printer detected from your Ultimaker account" msgid_plural "New printers detected from your Ultimaker account" msgstr[0] "Nieuwe printer gedetecteerd van uw Ultimaker-account" msgstr[1] "Nieuwe printers gedetecteerd van uw Ultimaker-account" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240 #, python-brace-format msgctxt "info:status Filled in with printer name and printer model." msgid "Adding printer {name} ({model}) from your account" msgstr "Printer {name} ({model}) toevoegen vanaf uw account" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257 #, python-brace-format msgctxt "info:{0} gets replaced by a number of printers" msgid "... and {0} other" msgid_plural "... and {0} others" msgstr[0] "... en {0} andere" msgstr[1] "... en {0} andere" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262 msgctxt "info:status" msgid "Printers added from Digital Factory:" msgstr "Printers toegevoegd vanuit Digital Factory:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328 msgctxt "info:status" msgid "A cloud connection is not available for a printer" msgid_plural "A cloud connection is not available for some printers" msgstr[0] "Een cloudverbinding is niet beschikbaar voor een printer" msgstr[1] "Een cloudverbinding is niet beschikbaar voor meerdere printers" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337 msgctxt "info:status" msgid "This printer is not linked to the Digital Factory:" msgid_plural "These printers are not linked to the Digital Factory:" msgstr[0] "Deze printer is niet gekoppeld aan de Digital Factory:" msgstr[1] "Deze printers zijn niet gekoppeld aan de Digital Factory:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432 msgctxt "info:name" msgid "Ultimaker Digital Factory" msgstr "Ultimaker Digital Factory" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346 #, python-brace-format msgctxt "info:status" msgid "To establish a connection, please visit the {website_link}" msgstr "Ga naar {website_link} om een verbinding tot stand te brengen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350 msgctxt "@action:button" msgid "Keep printer configurations" msgstr "Printerconfiguraties behouden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355 msgctxt "@action:button" msgid "Remove printers" msgstr "Printers verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "{printer_name} will be removed until the next account sync." msgstr "{printer_name} wordt verwijderd tot de volgende accountsynchronisatie." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "To remove {printer_name} permanently, visit {digital_factory_link}" msgstr "Bezoek {digital_factory_link} om {printer_name} permanent te verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436 #, python-brace-format msgctxt "@message {printer_name} is replaced with the name of the printer" msgid "Are you sure you want to remove {printer_name} temporarily?" msgstr "Weet u zeker dat u {printer_name} tijdelijk wilt verwijderen?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473 msgctxt "@title:window" msgid "Remove printers?" msgstr "Printers verwijderen?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476 #, python-brace-format msgctxt "@label" msgid "" "You are about to remove {0} printer from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgid_plural "" "You are about to remove {0} printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr[0] "" "U staat op het punt om {0} printer uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n" "Weet u zeker dat u door wilt gaan?" msgstr[1] "" "U staat op het punt om {0} printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n" "Weet u zeker dat u door wilt gaan?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481 msgctxt "@label" msgid "" "You are about to remove all printers from Cura. This action cannot be undone.\n" "Are you sure you want to continue?" msgstr "" "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n" "Weet u zeker dat u door wilt gaan?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154 msgctxt "@action:button" msgid "Print via cloud" msgstr "Printen via Cloud" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155 msgctxt "@properties:tooltip" msgid "Print via cloud" msgstr "Printen via Cloud" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156 msgctxt "@info:status" msgid "Connected via cloud" msgstr "Verbonden via Cloud" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261 msgctxt "@action:button" msgid "Monitor print" msgstr "Printen in de gaten houden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263 msgctxt "@action:tooltip" msgid "Track the print in Ultimaker Digital Factory" msgstr "Volg het printen in Ultimaker Digital Factory" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279 #, python-brace-format msgctxt "@error:send" msgid "Unknown error code when uploading print job: {0}" msgstr "Onbekende foutcode bij uploaden printtaak: {0}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31 msgctxt "@info:title" msgid "3D Model Assistant" msgstr "3D-modelassistent" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97 #, python-brace-format msgctxt "@info:status" msgid "" "

One or more 3D models may not print optimally due to the model size and material configuration:

\n" "

{model_names}

\n" "

Find out how to ensure the best possible print quality and reliability.

\n" "

View print quality guide

" msgstr "" "

Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:

\n" "

{model_names}

\n" "

Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.

\n" "

Handleiding printkwaliteit bekijken

" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129 msgctxt "@info:status" msgid "Cura does not accurately display layers when Wire Printing is enabled." msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer." #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130 msgctxt "@info:title" msgid "Simulation View" msgstr "Simulatieweergave" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133 msgctxt "@info:status" msgid "Nothing is shown because you need to slice first." msgstr "Er wordt niets weergegeven omdat u eerst moet slicen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134 msgctxt "@info:title" msgid "No layers to show" msgstr "Geen lagen om weer te geven" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74 msgctxt "@info:option_text" msgid "Do not show this message again" msgstr "Dit bericht niet meer weergeven" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15 msgctxt "@item:inlistbox" msgid "Layer view" msgstr "Laagweergave" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74 msgctxt "@error:not supported" msgid "GCodeWriter does not support non-text mode." msgstr "GCodeWriter ondersteunt geen non-tekstmodus." #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96 msgctxt "@warning:status" msgid "Please prepare G-code before exporting." msgstr "Bereid voorafgaand aan het exporteren G-code voor." #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "G-code File" msgstr "G-code-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226 msgctxt "@error:zip" msgid "Error writing 3mf file." msgstr "Fout bij het schrijven van het 3mf-bestand." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31 msgctxt "@error:zip" msgid "3MF Writer plug-in is corrupt." msgstr "3MF-schrijverplug-in is beschadigd." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37 msgctxt "@error" msgid "There is no workspace yet to write. Please add a printer first." msgstr "Er is nog geen werkruimte om te schrijven. Voeg eerst een printer toe." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97 msgctxt "@error:zip" msgid "No permission to write the workspace here." msgstr "Geen bevoegdheid om de werkruimte hier te schrijven." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101 msgctxt "@error:zip" msgid "The operating system does not allow saving a project file to this location or with this file name." msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26 msgctxt "@item:inlistbox" msgid "3MF file" msgstr "3MF-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34 msgctxt "@item:inlistbox" msgid "Cura Project 3MF file" msgstr "Cura-project 3MF-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17 msgctxt "@item:inlistbox" msgid "Compressed G-code File" msgstr "Gecomprimeerd G-code-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161 msgctxt "@message" msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker." msgstr "Slicen is mislukt door een onverwachte fout. Overweeg om de fout te melden via onze issue tracker." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162 msgctxt "@message:title" msgid "Slicing failed" msgstr "Slicen mislukt" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167 msgctxt "@message:button" msgid "Report a bug" msgstr "Een fout melden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168 msgctxt "@message:description" msgid "Report a bug on Ultimaker Cura's issue tracker." msgstr "Meld een fout via de issue tracker van Ultimaker Cura." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493 msgctxt "@info:title" msgid "Unable to slice" msgstr "Kan niet slicen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice with the current settings. The following settings have errors: {0}" msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455 #, python-brace-format msgctxt "@info:status" msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}" msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467 msgctxt "@info:status" msgid "Unable to slice because the prime tower or prime position(s) are invalid." msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479 #, python-format msgctxt "@info:status" msgid "Unable to slice because there are objects associated with disabled Extruder %s." msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489 msgctxt "@info:status" msgid "" "Please review settings and check if your models:\n" "- Fit within the build volume\n" "- Are assigned to an enabled extruder\n" "- Are not all set as modifier meshes" msgstr "" "Controleer de instellingen en zorg ervoor dat uw modellen:\n" "- binnen het werkvolume passen\n" "- zijn toegewezen aan een ingeschakelde extruder\n" "- niet allemaal zijn ingesteld als modificatierasters" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260 msgctxt "@info:status" msgid "Processing Layers" msgstr "Lagen verwerken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261 msgctxt "@info:title" msgid "Information" msgstr "Informatie" #: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" msgid "X3D File" msgstr "X3D-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "JPG Image" msgstr "JPG-afbeelding" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "JPEG Image" msgstr "JPEG-afbeelding" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22 msgctxt "@item:inlistbox" msgid "PNG Image" msgstr "PNG-afbeelding" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26 msgctxt "@item:inlistbox" msgid "BMP Image" msgstr "BMP-afbeelding" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30 msgctxt "@item:inlistbox" msgid "GIF Image" msgstr "GIF-afbeelding" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713 msgctxt "@label" msgid "Nozzle" msgstr "Nozzle" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Project file {0} contains an unknown machine type {1}. Cannot import the machine. Models will be imported instead." msgstr "Projectbestand {0} bevat een onbekend type machine {1}. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547 msgctxt "@info:title" msgid "Open Project File" msgstr "Projectbestand Openen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is suddenly inaccessible: {1}." msgstr "Projectbestand {0} is plotseling ontoegankelijk: {1}." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653 msgctxt "@info:title" msgid "Can't Open Project File" msgstr "Kan projectbestand niet openen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652 #, python-brace-format msgctxt "@info:error Don't translate the XML tags or !" msgid "Project file {0} is corrupt: {1}." msgstr "Projectbestand {0} is corrupt: {1}." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705 #, python-brace-format msgctxt "@info:error Don't translate the XML tag !" msgid "Project file {0} is made using profiles that are unknown to this version of Ultimaker Cura." msgstr "Projectbestand {0} wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van Ultimaker Cura." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203 msgctxt "@title:tab" msgid "Recommended" msgstr "Aanbevolen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205 msgctxt "@title:tab" msgid "Custom" msgstr "Aangepast" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33 msgctxt "@item:inlistbox" msgid "3MF File" msgstr "3MF-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159 msgctxt "@info:error" msgid "Can't write to UFP file:" msgstr "Kan niet naar UFP-bestand schrijven:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" msgid "Cura 15.04 profiles" msgstr "Cura 15.04-profielen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25 msgctxt "@info:title" msgid "Backups" msgstr "Back-ups" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error while uploading your backup." msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46 msgctxt "@info:backup_status" msgid "Creating your backup..." msgstr "Uw back-up maken..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55 msgctxt "@info:backup_status" msgid "There was an error while creating your backup." msgstr "Er is een fout opgetreden bij het maken van de back-up." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59 msgctxt "@info:backup_status" msgid "Uploading your backup..." msgstr "Uw back-up wordt geüpload..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69 msgctxt "@info:backup_status" msgid "Your backup has finished uploading." msgstr "Uw back-up is geüpload." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103 msgctxt "@error:file_size" msgid "The backup exceeds the maximum file size." msgstr "De back-up is groter dan de maximale bestandsgrootte." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69 msgctxt "@item:inmenu" msgid "Manage backups" msgstr "Back-ups beheren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126 #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122 #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159 msgctxt "@info:title" msgid "Backup" msgstr "Back-up" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86 #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26 msgctxt "@info:backup_status" msgid "There was an error trying to restore your backup." msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up." #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95 msgctxt "@text" msgid "Unable to read example data file." msgstr "Kan het voorbeeldgegevensbestand niet lezen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43 msgctxt "@error:not supported" msgid "GCodeGzWriter does not support text mode." msgstr "GCodeGzWriter ondersteunt geen tekstmodus." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35 msgctxt "@item:inmenu" msgid "Post Processing" msgstr "Nabewerking" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36 msgctxt "@item:inmenu" msgid "Modify G-Code" msgstr "G-code wijzigen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12 msgctxt "@label" msgid "Support Blocker" msgstr "Supportblokkering" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13 msgctxt "@info:tooltip" msgid "Create a volume in which supports are not printed." msgstr "Maak een volume waarin supportstructuren niet worden geprint." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13 msgctxt "@item:inmenu" msgid "Preview" msgstr "Voorbeeld" #: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" msgstr "Röntgenweergave" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24 msgctxt "@action" msgid "Level build plate" msgstr "Platform kalibreren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21 msgctxt "@action" msgid "Select upgrades" msgstr "Upgrades selecteren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43 msgctxt "@label:property" msgid "Unknown Package" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66 msgctxt "@label:property" msgid "Unknown Author" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116 msgctxt "@info:error" msgid "Could not interpret the server's response." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146 msgctxt "@info:error" msgid "Could not reach Marketplace." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28 msgctxt "@label" msgid "Installed Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29 msgctxt "@label" msgid "Installed Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33 msgctxt "@label" msgid "Bundled Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34 msgctxt "@label" msgid "Bundled Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71 msgctxt "@info:status" msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura." msgstr "De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan. Corrigeer het model en open het opnieuw in Cura." #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73 msgctxt "@info:title" msgid "Model Errors" msgstr "Modelfouten" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82 msgctxt "@action:button" msgid "Learn more" msgstr "Meer informatie" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" msgstr "Solide weergave" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350 msgctxt "@info:status" msgid "Parsing G-code" msgstr "G-code parseren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352 #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506 msgctxt "@info:title" msgid "G-code Details" msgstr "Details van de G-code" #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504 msgctxt "@info:generic" msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate." msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig." #: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" msgid "G File" msgstr "G-bestand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32 msgctxt "@action" msgid "Machine Settings" msgstr "Machine-instellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42 msgctxt "@item:inmenu" msgid "USB printing" msgstr "USB-printen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43 msgctxt "@action:button Preceded by 'Ready to'." msgid "Print via USB" msgstr "Printen via USB" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44 msgctxt "@info:tooltip" msgid "Print via USB" msgstr "Via USB Printen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80 msgctxt "@info:status" msgid "Connected via USB" msgstr "Aangesloten via USB" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110 msgctxt "@label" msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?" msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135 msgctxt "@message" msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed." msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid." #: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136 msgctxt "@message" msgid "Print in Progress" msgstr "Bezig met printen" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529 msgctxt "@info:progress" msgid "Loading machines..." msgstr "Machines laden..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536 msgctxt "@info:progress" msgid "Setting up preferences..." msgstr "Voorkeuren instellen..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678 msgctxt "@info:progress" msgid "Initializing Active Machine..." msgstr "Actieve machine initialiseren ..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802 msgctxt "@info:progress" msgid "Initializing machine manager..." msgstr "Machinebeheer initialiseren ..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816 msgctxt "@info:progress" msgid "Initializing build volume..." msgstr "Werkvolume initialiseren ..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884 msgctxt "@info:progress" msgid "Setting up scene..." msgstr "Scene instellen..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920 msgctxt "@info:progress" msgid "Loading interface..." msgstr "Interface laden..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925 msgctxt "@info:progress" msgid "Initializing engine..." msgstr "Engine initialiseren ..." #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242 #, python-format msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm." msgid "%(width).1f x %(depth).1f x %(height).1f mm" msgstr "%(width).1f x %(depth).1f x %(height).1f mm" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768 #, python-brace-format msgctxt "@info:status" msgid "Only one G-code file can be loaded at a time. Skipped importing {0}" msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen" #: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780 #, python-brace-format msgctxt "@info:status" msgid "Can't open any other file if G-code is loading. Skipped importing {0}" msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11 msgctxt "@label" msgid "Default" msgstr "Default" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14 msgctxt "@label" msgid "Visual" msgstr "Visueel" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15 msgctxt "@text" msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality." msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren." #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18 msgctxt "@label" msgid "Engineering" msgstr "Engineering" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19 msgctxt "@text" msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances." msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties." #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22 msgctxt "@label" msgid "Draft" msgstr "Ontwerp" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23 msgctxt "@text" msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction." msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten." #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219 msgctxt "@menuitem" msgid "Not overridden" msgstr "Niet overschreven" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143 #, python-brace-format msgctxt "@label {0} is the name of a printer that's about to be deleted." msgid "Are you sure you wish to remove {0}? This cannot be undone!" msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614 msgctxt "@label" msgid "Unknown" msgstr "Onbekend" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113 msgctxt "@label" msgid "The printer(s) below cannot be connected because they are part of a group" msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115 msgctxt "@label" msgid "Available networked printers" msgstr "Beschikbare netwerkprinters" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182 msgctxt "@info:status" msgid "Calculated" msgstr "Berekend" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66 msgctxt "@action:button" msgid "Please sync the material profiles with your printers before starting to print." msgstr "Synchroniseer de materiaalprofielen met uw printer voordat u gaat printen." #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67 msgctxt "@action:button" msgid "New materials installed" msgstr "Nieuwe materialen geïnstalleerd" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63 #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74 msgctxt "@action:button" msgid "Sync materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288 msgctxt "@label" msgid "Custom Material" msgstr "Aangepast materiaal" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336 msgctxt "@label" msgid "Custom" msgstr "Aangepast" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390 msgctxt "@label" msgid "Custom profiles" msgstr "Aangepaste profielen" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425 #, python-brace-format msgctxt "@item:inlistbox" msgid "All Supported Types ({0})" msgstr "Alle Ondersteunde Typen ({0})" #: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426 msgctxt "@item:inlistbox" msgid "All Files (*)" msgstr "Alle Bestanden (*)" #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104 msgctxt "@text:error" msgid "Failed to create archive of materials to sync with printers." msgstr "Kan geen materiaalarchief maken voor synchronisatie met printers." #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111 #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165 msgctxt "@text:error" msgid "Failed to load the archive of materials to sync it with printers." msgstr "Kan het materiaalarchief niet laden voor synchronisatie met printers." #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143 msgctxt "@text:error" msgid "The response from Digital Factory appears to be corrupted." msgstr "Antwoord van Digital Factor is mogelijk beschadigd." #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147 #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151 #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155 msgctxt "@text:error" msgid "The response from Digital Factory is missing important information." msgstr "In het antwoord van Digital Factory ontbreekt belangrijke informatie." #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218 msgctxt "@text:error" msgid "Failed to connect to Digital Factory to sync materials with some of the printers." msgstr "Kan geen verbinding maken met Digital Factory voor de synchronisatie van materialen met enkele printers." #: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232 msgctxt "@text:error" msgid "Failed to connect to Digital Factory." msgstr "Kan geen verbinding maken met Digital Factory." #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115 msgctxt "@info:backup_failed" msgid "Could not create archive from user data directory: {}" msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup without having proper data or meta data." msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata." #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145 msgctxt "@info:backup_failed" msgid "Tried to restore a Cura backup that is higher than the current version." msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie." #: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158 msgctxt "@info:backup_failed" msgid "The following error occurred while trying to restore a Cura backup:" msgstr "De volgende fout is opgetreden bij het herstellen van een Cura-backup:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24 msgctxt "@info:status" msgid "Finding new location for objects" msgstr "Nieuwe locatie vinden voor objecten" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28 msgctxt "@info:title" msgid "Finding Location" msgstr "Locatie vinden" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41 #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99 msgctxt "@info:status" msgid "Unable to find a location within the build volume for all objects" msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden" #: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42 msgctxt "@info:title" msgid "Can't Find Location" msgstr "Kan locatie niet vinden" #: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190 msgctxt "@info:title" msgid "Login failed" msgstr "Inloggen mislukt" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85 msgctxt "@tooltip" msgid "Outer Wall" msgstr "Buitenwand" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86 msgctxt "@tooltip" msgid "Inner Walls" msgstr "Binnenwanden" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87 msgctxt "@tooltip" msgid "Skin" msgstr "Skin" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88 msgctxt "@tooltip" msgid "Infill" msgstr "Vulling" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89 msgctxt "@tooltip" msgid "Support Infill" msgstr "Supportvulling" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90 msgctxt "@tooltip" msgid "Support Interface" msgstr "Verbindingsstructuur" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91 msgctxt "@tooltip" msgid "Support" msgstr "Supportstructuur" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92 msgctxt "@tooltip" msgid "Skirt" msgstr "Skirt" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93 msgctxt "@tooltip" msgid "Prime Tower" msgstr "Primepijler" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94 msgctxt "@tooltip" msgid "Travel" msgstr "Beweging" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95 msgctxt "@tooltip" msgid "Retractions" msgstr "Intrekkingen" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96 msgctxt "@tooltip" msgid "Other" msgstr "Overig(e)" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69 #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" msgstr "Groepsnummer #{group_nr}" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63 msgctxt "@text:window" msgid "The release notes could not be opened." msgstr "De release notes konden niet worden geopend." #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286 msgctxt "@action:button" msgid "Skip" msgstr "Overslaan" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72 #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135 #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178 #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172 msgctxt "@action:button" msgid "Close" msgstr "Sluiten" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61 msgctxt "@action:button" msgid "Add" msgstr "Toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290 msgctxt "@action:button" msgid "Finish" msgstr "Voltooien" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43 #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136 msgctxt "@action:button" msgid "Cancel" msgstr "Annuleren" #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57 #: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277 msgctxt "@action:button" msgid "Next" msgstr "Volgende" #: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100 msgctxt "@info:status" msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models." msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling “Printvolgorde”, om te voorkomen dat de rijbrug tegen geprinte modellen botst." #: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103 msgctxt "@info:title" msgid "Build Volume" msgstr "Werkvolume" #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135 msgctxt "@message:text" msgid "Could not save material archive to {}:" msgstr "Kan materiaalarchief niet opslaan op {}:" #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136 msgctxt "@message:title" msgid "Failed to save material archive" msgstr "Opslaan materiaalarchief mislukt" #: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188 msgctxt "@text" msgid "Unknown error." msgstr "Onbekende fout." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140 msgctxt "@title:window" msgid "File Already Exists" msgstr "Het Bestand Bestaat Al" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141 #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" msgstr "Het bestand {0} bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462 msgctxt "@info:status" msgid "Invalid file URL:" msgstr "Ongeldige bestands-URL:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36 msgctxt "@info:not supported profile" msgid "Not supported" msgstr "Niet ondersteund" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55 msgctxt "@info:No intent profile selected" msgid "Default" msgstr "Default" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857 msgctxt "@info:message Followed by a list of settings." msgid "Settings have been changed to match the current availability of extruders:" msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858 msgctxt "@info:title" msgid "Settings updated" msgstr "De instellingen zijn bijgewerkt" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480 msgctxt "@info:title" msgid "Extruder(s) Disabled" msgstr "Extruder(s) uitgeschakeld" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" msgstr "Kan het profiel niet exporteren als {0}: {1}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." msgstr "Kan het profiel niet exporteren als {0}: Plug-in voor de schrijver heeft een fout gerapporteerd." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" msgstr "Het profiel is geëxporteerd als {0}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173 msgctxt "@info:title" msgid "Export succeeded" msgstr "De export is voltooid" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}: {1}" msgstr "Kan het profiel niet importeren uit {0}: {1}" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Can't import profile from {0} before a printer is added." msgstr "Kan het profiel niet importeren uit {0} voordat een printer toegevoegd is." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "No custom profile to import in file {0}" msgstr "Er is geen aangepast profiel om in het bestand {0} te importeren" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "Failed to import profile from {0}:" msgstr "Kan het profiel niet importeren uit {0}:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252 #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262 #, python-brace-format msgctxt "@info:status Don't translate the XML tags !" msgid "This profile {0} contains incorrect data, could not import it." msgstr "Dit profiel {0} bevat incorrecte gegevens. Kan het profiel niet importeren." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to import profile from {0}:" msgstr "Kan het profiel niet importeren uit {0}:" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359 #, python-brace-format msgctxt "@info:status" msgid "Successfully imported profile {0}." msgstr "Het profiel {0} is geïmporteerd." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366 #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." msgstr "Het bestand {0} bevat geen geldig profiel." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369 #, python-brace-format msgctxt "@info:status" msgid "Profile {0} has an unknown file type or is corrupted." msgstr "Het profiel {0} heeft een onbekend bestandstype of is beschadigd." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443 msgctxt "@label" msgid "Custom profile" msgstr "Aangepast profiel" #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459 msgctxt "@info:status" msgid "Profile is missing a quality type." msgstr "Er ontbreekt een kwaliteitstype in het profiel." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463 msgctxt "@info:status" msgid "There is no active printer yet." msgstr "Er is nog geen actieve printer." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469 msgctxt "@info:status" msgid "Unable to add the profile." msgstr "Kan het profiel niet toevoegen." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483 #, python-brace-format msgctxt "@info:status" msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'." msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinedefinitie '{1}'." #: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488 #, python-brace-format msgctxt "@info:status" msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type." msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is." #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30 msgctxt "@info:status" msgid "Multiplying and placing objects" msgstr "Objecten verveelvoudigen en plaatsen" #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32 msgctxt "@info:title" msgid "Placing Objects" msgstr "Objecten plaatsen" #: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100 msgctxt "@info:title" msgid "Placing Object" msgstr "Object plaatsen" #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216 msgctxt "@info" msgid "Unable to start a new sign in process. Check if another sign in attempt is still active." msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277 msgctxt "@info" msgid "Unable to reach the Ultimaker account server." msgstr "Kan de Ultimaker-accountserver niet bereiken." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278 msgctxt "@info:title" msgid "Log-in failed" msgstr "Aanmelden mislukt" #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89 msgctxt "@message" msgid "Could not read response." msgstr "Kan het antwoord niet lezen." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75 msgctxt "@message" msgid "The provided state is not correct." msgstr "De opgegeven status is niet juist." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80 msgctxt "@message" msgid "Timeout when authenticating with the account server." msgstr "Time-out tijdens verificatie bij de accountserver." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97 msgctxt "@message" msgid "Please give the required permissions when authorizing this application." msgstr "Verleen de vereiste toestemmingen toe bij het autoriseren van deze toepassing." #: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104 msgctxt "@message" msgid "Something unexpected happened when trying to log in, please try again." msgstr "Er heeft een onverwachte gebeurtenis plaatsgevonden bij het aanmelden. Probeer het opnieuw." #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107 msgctxt "@title:window" msgid "Cura can't start" msgstr "Cura kan niet worden gestart" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113 msgctxt "@label crash message" msgid "" "

Oops, Ultimaker Cura has encountered something that doesn't seem right.

\n" "

We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.

\n" "

Backups can be found in the configuration folder.

\n" "

Please send us this Crash Report to fix the problem.

\n" " " msgstr "" "

Oeps, Ultimaker Cura heeft een probleem gedetecteerd.

\n" "

Tijdens het opstarten is een onherstelbare fout opgetreden. Deze fout is mogelijk veroorzaakt door enkele onjuiste configuratiebestanden. Het wordt aanbevolen een back-up te maken en de standaardinstelling van uw configuratie te herstellen.

\n" "

Back-ups bevinden zich in de configuratiemap.

\n" "

Stuur ons dit crashrapport om het probleem op te lossen.

\n" " " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122 msgctxt "@action:button" msgid "Send crash report to Ultimaker" msgstr "Het crashrapport naar Ultimaker verzenden" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125 msgctxt "@action:button" msgid "Show detailed crash report" msgstr "Gedetailleerd crashrapport weergeven" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129 msgctxt "@action:button" msgid "Show configuration folder" msgstr "Open Configuratiemap" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140 msgctxt "@action:button" msgid "Backup and Reset Configuration" msgstr "Back-up maken en herstellen van configuratie" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171 msgctxt "@title:window" msgid "Crash Report" msgstr "Crashrapport" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190 msgctxt "@label crash message" msgid "" "

A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem

\n" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" "

Er is een fatale fout opgetreden in Cura. Stuur ons het crashrapport om het probleem op te lossen

\n" "

Druk op de knop \"Rapport verzenden\" om het foutenrapport automatisch naar onze servers te verzenden

\n" " " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198 msgctxt "@title:groupbox" msgid "System information" msgstr "Systeeminformatie" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207 msgctxt "@label unknown version of Cura" msgid "Unknown" msgstr "Onbekend" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228 msgctxt "@label Cura version number" msgid "Cura version" msgstr "Cura-versie" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229 msgctxt "@label" msgid "Cura language" msgstr "Taal van Cura" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230 msgctxt "@label" msgid "OS language" msgstr "Taal van besturingssysteem" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231 msgctxt "@label Type of platform" msgid "Platform" msgstr "Platform" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232 msgctxt "@label" msgid "Qt version" msgstr "Qt version" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233 msgctxt "@label" msgid "PyQt version" msgstr "PyQt version" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234 msgctxt "@label OpenGL version" msgid "OpenGL" msgstr "OpenGL" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264 msgctxt "@label" msgid "Not yet initialized
" msgstr "Nog niet geïnitialiseerd
" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267 #, python-brace-format msgctxt "@label OpenGL version" msgid "
  • OpenGL Version: {version}
    • " msgstr "
  • OpenGL-versie: {version}
    • " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268 #, python-brace-format msgctxt "@label OpenGL vendor" msgid "
  • OpenGL Vendor: {vendor}
    • " msgstr "
  • OpenGL-leverancier: {vendor}
    • " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269 #, python-brace-format msgctxt "@label OpenGL renderer" msgid "
  • OpenGL Renderer: {renderer}
    • " msgstr "
  • OpenGL-renderer: {renderer}
    • " #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303 msgctxt "@title:groupbox" msgid "Error traceback" msgstr "Traceback van fout" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389 msgctxt "@title:groupbox" msgid "Logs" msgstr "Logboeken" #: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417 msgctxt "@action:button" msgid "Send report" msgstr "Rapport verzenden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100 msgctxt "@info" msgid "" "Please make sure your printer has a connection:\n" "- Check if the printer is turned on.\n" "- Check if the printer is connected to the network.\n" "- Check if you are signed in to discover cloud-connected printers." msgstr "" "Controleer of de printer verbonden is:\n" "- Controleer of de printer ingeschakeld is.\n" "- Controleer of de printer verbonden is met het netwerk.\n" "- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren." #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113 msgctxt "@info" msgid "Please connect your printer to the network." msgstr "Verbind uw printer met het netwerk." #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146 msgctxt "@label link to technical assistance" msgid "View user manuals online" msgstr "Gebruikershandleidingen online weergegeven" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163 msgctxt "@info" msgid "In order to monitor your print from Cura, please connect the printer." msgstr "Sluit de printer aan om uw printopdracht vanuit Cura te volgen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17 msgctxt "@title:window" msgid "Select Settings to Customize for this model" msgstr "Instellingen Selecteren om Dit Model Aan te Passen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100 msgctxt "@label:textbox" msgid "Filter..." msgstr "Filteren..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75 msgctxt "@label:checkbox" msgid "Show all" msgstr "Alles weergeven" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41 msgctxt "@label" msgid "Mesh Type" msgstr "Rastertype" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81 msgctxt "@label" msgid "Normal model" msgstr "Normaal model" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96 msgctxt "@label" msgid "Print as support" msgstr "Printen als supportstructuur" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111 msgctxt "@label" msgid "Modify settings for overlaps" msgstr "Instellingen aanpassen voor overlapping" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126 msgctxt "@label" msgid "Don't support overlaps" msgstr "Supportstructuur niet laten overlappen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159 msgctxt "@item:inlistbox" msgid "Infill mesh only" msgstr "Alleen vulraster" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160 msgctxt "@item:inlistbox" msgid "Cutting mesh" msgstr "Snijdend raster" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385 msgctxt "@action:button" msgid "Select settings" msgstr "Instellingen selecteren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31 msgctxt "@title" msgid "Update Firmware" msgstr "Firmware bijwerken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37 msgctxt "@label" msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work." msgstr "Firmware is de software die direct op de 3D-printer wordt uitgevoerd. Deze firmware bedient de stappenmotoren, regelt de temperatuur en zorgt er in feite voor dat de printer doet wat deze moet doen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43 msgctxt "@label" msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements." msgstr "De firmware die bij nieuwe printers wordt geleverd, werkt wel, maar nieuwe versies hebben vaak meer functies en verbeteringen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55 msgctxt "@action:button" msgid "Automatically upgrade Firmware" msgstr "Firmware-upgrade Automatisch Uitvoeren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66 msgctxt "@action:button" msgid "Upload custom Firmware" msgstr "Aangepaste Firmware Uploaden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79 msgctxt "@label" msgid "Firmware can not be updated because there is no connection with the printer." msgstr "Kan de firmware niet bijwerken omdat er geen verbinding met de printer is." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86 msgctxt "@label" msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware." msgstr "Kan de firmware niet bijwerken omdat de verbinding met de printer geen ondersteuning biedt voor het uitvoeren van een firmware-upgrade." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93 msgctxt "@title:window" msgid "Select custom firmware" msgstr "Aangepaste firmware selecteren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114 msgctxt "@title:window" msgid "Firmware Update" msgstr "Firmware-update" #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138 msgctxt "@label" msgid "Updating firmware." msgstr "De firmware wordt bijgewerkt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140 msgctxt "@label" msgid "Firmware update completed." msgstr "De firmware-update is voltooid." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142 msgctxt "@label" msgid "Firmware update failed due to an unknown error." msgstr "Firmware-update mislukt door een onbekende fout." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144 msgctxt "@label" msgid "Firmware update failed due to an communication error." msgstr "Firmware-update mislukt door een communicatiefout." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146 msgctxt "@label" msgid "Firmware update failed due to an input/output error." msgstr "Firmware-update mislukt door een invoer-/uitvoerfout." #: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148 msgctxt "@label" msgid "Firmware update failed due to missing firmware." msgstr "Firmware-update mislukt door ontbrekende firmware." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88 msgctxt "@label:status" msgid "Aborted" msgstr "Afgebroken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74 msgctxt "@label:status" msgid "Finished" msgstr "Gereed" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351 msgctxt "@label:status" msgid "Preparing..." msgstr "Voorbereiden..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 msgctxt "@label:status" msgid "Aborting..." msgstr "Afbreken..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96 msgctxt "@label:status" msgid "Failed" msgstr "Mislukt" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98 msgctxt "@label:status" msgid "Pausing..." msgstr "Pauzeren..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100 msgctxt "@label:status" msgid "Paused" msgstr "Gepauzeerd" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102 msgctxt "@label:status" msgid "Resuming..." msgstr "Hervatten..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104 msgctxt "@label:status" msgid "Action required" msgstr "Handeling nodig" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106 msgctxt "@label:status" msgid "Finishes %1 at %2" msgstr "Voltooit %1 om %2" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148 msgctxt "@label link to Connect and Cloud interfaces" msgid "Manage printer" msgstr "Printer beheren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175 msgctxt "@label" msgid "Glass" msgstr "Glas" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467 #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239 msgctxt "@info" msgid "Please update your printer's firmware to manage the queue remotely." msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275 msgctxt "@info" msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam." msgstr "Vanuit Ultimaker Cura kunt u de webcamfeeds voor cloudprinters niet bekijken. Klik op 'Printer beheren' om Ultimaker Digital Factory te bezoeken en deze webcam te bekijken." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335 msgctxt "@label:status" msgid "Loading..." msgstr "Laden..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339 msgctxt "@label:status" msgid "Unavailable" msgstr "Niet beschikbaar" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343 msgctxt "@label:status" msgid "Unreachable" msgstr "Onbereikbaar" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347 msgctxt "@label:status" msgid "Idle" msgstr "Inactief" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356 msgctxt "@label:status" msgid "Printing" msgstr "Printen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397 msgctxt "@label" msgid "Untitled" msgstr "Zonder titel" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412 msgctxt "@label" msgid "Anonymous" msgstr "Anoniem" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433 msgctxt "@label:status" msgid "Requires configuration changes" msgstr "Hiervoor zijn configuratiewijzigingen vereist" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447 msgctxt "@action:button" msgid "Details" msgstr "Details" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20 msgctxt "@title:window" msgid "Configuration Changes" msgstr "Configuratiewijzigingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36 msgctxt "@action:button" msgid "Override" msgstr "Overschrijven" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83 msgctxt "@label" msgid "The assigned printer, %1, requires the following configuration change:" msgid_plural "The assigned printer, %1, requires the following configuration changes:" msgstr[0] "Voor de toegewezen printer, %1, is de volgende configuratiewijziging vereist:" msgstr[1] "Voor de toegewezen printer, %1, zijn de volgende configuratiewijzigingen vereist:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87 msgctxt "@label" msgid "The printer %1 is assigned, but the job contains an unknown material configuration." msgstr "De printer %1 is toegewezen. De taak bevat echter een onbekende materiaalconfiguratie." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97 msgctxt "@label" msgid "Change material %1 from %2 to %3." msgstr "Wijzig het materiaal %1 van %2 in %3." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100 msgctxt "@label" msgid "Load %3 as material %1 (This cannot be overridden)." msgstr "Laad %3 als materiaal %1 (kan niet worden overschreven)." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103 msgctxt "@label" msgid "Change print core %1 from %2 to %3." msgstr "Wijzig de print core %1 van %2 in %3." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106 msgctxt "@label" msgid "Change build plate to %1 (This cannot be overridden)." msgstr "Wijzig het platform naar %1 (kan niet worden overschreven)." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113 msgctxt "@label" msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print." msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154 msgctxt "@label" msgid "Aluminum" msgstr "Aluminium" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12 msgctxt "@title:window" msgid "Print over network" msgstr "Printen via netwerk" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53 msgctxt "@action:button" msgid "Print" msgstr "Printen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81 msgctxt "@label" msgid "Printer selection" msgstr "Printerselectie" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44 msgctxt "@title:window" msgid "Connect to Networked Printer" msgstr "Verbinding Maken met Printer in het Netwerk" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer." msgstr "Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om G-code-bestanden naar de printer over te zetten." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51 msgctxt "@label" msgid "Select your printer from the list below:" msgstr "Selecteer uw printer in de onderstaande lijst:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71 msgctxt "@action:button" msgid "Edit" msgstr "Bewerken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320 msgctxt "@action:button" msgid "Remove" msgstr "Verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90 msgctxt "@action:button" msgid "Refresh" msgstr "Vernieuwen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161 msgctxt "@label" msgid "If your printer is not listed, read the network printing troubleshooting guide" msgstr "Raadpleeg de handleiding voor probleemoplossing bij printen via het netwerk als uw printer niet in de lijst wordt vermeld" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263 msgctxt "@label" msgid "Type" msgstr "Type" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279 msgctxt "@label" msgid "Firmware version" msgstr "Firmwareversie" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295 msgctxt "@label" msgid "Address" msgstr "Adres" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232 msgctxt "@label" msgid "This printer is not set up to host a group of printers." msgstr "Deze printer is niet ingesteld voor het hosten van een groep printers." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236 msgctxt "@label" msgid "This printer is the host for a group of %1 printers." msgstr "Deze printer is de host voor een groep van %1 printers." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245 msgctxt "@label" msgid "The printer at this address has not yet responded." msgstr "De printer op dit adres heeft nog niet gereageerd." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250 msgctxt "@action:button" msgid "Connect" msgstr "Verbinden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261 msgctxt "@title:window" msgid "Invalid IP address" msgstr "Ongeldig IP-adres" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146 msgctxt "@text" msgid "Please enter a valid IP address." msgstr "Voer een geldig IP-adres in." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272 msgctxt "@title:window" msgid "Printer Address" msgstr "Printeradres" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102 msgctxt "@label" msgid "Enter the IP address of your printer on the network." msgstr "Voer het IP-adres van uw printer in het netwerk in." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126 msgctxt "@label" msgid "Unavailable printer" msgstr "Niet‑beschikbare printer" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128 msgctxt "@label" msgid "First available" msgstr "Eerst beschikbaar" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54 msgctxt "@label" msgid "Move to top" msgstr "Plaats bovenaan" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70 msgctxt "@label" msgid "Delete" msgstr "Verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284 msgctxt "@label" msgid "Resume" msgstr "Hervatten" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102 msgctxt "@label" msgid "Pausing..." msgstr "Pauzeren..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104 msgctxt "@label" msgid "Resuming..." msgstr "Hervatten..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288 msgctxt "@label" msgid "Pause" msgstr "Pauzeren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Aborting..." msgstr "Afbreken..." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124 msgctxt "@label" msgid "Abort" msgstr "Afbreken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to move %1 to the top of the queue?" msgstr "Weet u zeker dat u %1 bovenaan de wachtrij wilt plaatsen?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143 msgctxt "@window:title" msgid "Move print job to top" msgstr "Plaats printtaak bovenaan" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to delete %1?" msgstr "Weet u zeker dat u %1 wilt verwijderen?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152 msgctxt "@window:title" msgid "Delete print job" msgstr "Printtaak verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160 msgctxt "@label %1 is the name of a print job." msgid "Are you sure you want to abort %1?" msgstr "Weet u zeker dat u %1 wilt afbreken?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326 msgctxt "@window:title" msgid "Abort print" msgstr "Printen afbreken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29 msgctxt "@label" msgid "Queued" msgstr "In wachtrij" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63 msgctxt "@label link to connect manager" msgid "Manage in browser" msgstr "Beheren in browser" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90 msgctxt "@label" msgid "There are no print jobs in the queue. Slice and send a job to add one." msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98 msgctxt "@label" msgid "Print jobs" msgstr "Printtaken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107 msgctxt "@label" msgid "Total print time" msgstr "Totale printtijd" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116 msgctxt "@label" msgid "Waiting for" msgstr "Wachten op" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48 msgctxt "@label" msgid "Color scheme" msgstr "Kleurenschema" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105 msgctxt "@label:listbox" msgid "Material Color" msgstr "Materiaalkleur" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109 msgctxt "@label:listbox" msgid "Line Type" msgstr "Lijntype" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113 msgctxt "@label:listbox" msgid "Speed" msgstr "Snelheid" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117 msgctxt "@label:listbox" msgid "Layer Thickness" msgstr "Laagdikte" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121 msgctxt "@label:listbox" msgid "Line Width" msgstr "Lijnbreedte" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125 msgctxt "@label:listbox" msgid "Flow" msgstr "Doorvoer" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165 msgctxt "@label" msgid "Compatibility Mode" msgstr "Compatibiliteitsmodus" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232 msgctxt "@label" msgid "Travels" msgstr "Bewegingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238 msgctxt "@label" msgid "Helpers" msgstr "Helpers" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244 msgctxt "@label" msgid "Shell" msgstr "Shell" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64 msgctxt "@label" msgid "Infill" msgstr "Vulling" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258 msgctxt "@label" msgid "Starts" msgstr "Wordt gestart" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307 msgctxt "@label" msgid "Only Show Top Layers" msgstr "Alleen bovenlagen weergegeven" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316 msgctxt "@label" msgid "Show 5 Detailed Layers On Top" msgstr "5 gedetailleerde lagen bovenaan weergeven" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329 msgctxt "@label" msgid "Top / Bottom" msgstr "Boven-/onderkant" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333 msgctxt "@label" msgid "Inner Wall" msgstr "Binnenwand" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400 msgctxt "@label" msgid "min" msgstr "min" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465 msgctxt "@label" msgid "max" msgstr "max" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14 msgctxt "@title:window" msgid "Convert Image" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33 msgctxt "@action:label" msgid "Height (mm)" msgstr "Hoogte (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56 msgctxt "@info:tooltip" msgid "The maximum distance of each pixel from \"Base.\"" msgstr "De maximale afstand van elke pixel tot de \"Basis\"." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66 msgctxt "@action:label" msgid "Base (mm)" msgstr "Basis (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90 msgctxt "@info:tooltip" msgid "The base height from the build plate in millimeters." msgstr "De basishoogte van het platform in millimeters." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100 msgctxt "@action:label" msgid "Width (mm)" msgstr "Breedte (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124 msgctxt "@info:tooltip" msgid "The width in millimeters on the build plate" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134 msgctxt "@action:label" msgid "Depth (mm)" msgstr "Diepte (mm)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158 msgctxt "@info:tooltip" msgid "The depth in millimeters on the build plate" msgstr "De diepte op het platform in millimeters" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187 msgctxt "@item:inlistbox" msgid "Darker is higher" msgstr "Donkerder is hoger" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188 msgctxt "@item:inlistbox" msgid "Lighter is higher" msgstr "Lichter is hoger" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195 msgctxt "@info:tooltip" msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model." msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205 msgctxt "@action:label" msgid "Color Model" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224 msgctxt "@item:inlistbox" msgid "Linear" msgstr "Lineair" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225 msgctxt "@item:inlistbox" msgid "Translucency" msgstr "Doorschijnendheid" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232 msgctxt "@info:tooltip" msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly." msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242 msgctxt "@action:label" msgid "1mm Transmittance (%)" msgstr "Transmissie 1 mm (%)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263 msgctxt "@info:tooltip" msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image." msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274 msgctxt "@action:label" msgid "Smoothing" msgstr "Effenen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298 msgctxt "@info:tooltip" msgid "The amount of smoothing to apply to the image." msgstr "De mate van effening die op de afbeelding moet worden toegepast." #: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329 #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140 msgctxt "@action:button" msgid "OK" msgstr "OK" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15 msgctxt "@title:window" msgid "Open Project" msgstr "Project openen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55 msgctxt "@action:ComboBox Update/override existing profile" msgid "Update existing" msgstr "Bestaand(e) bijwerken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56 msgctxt "@action:ComboBox Save settings in a new profile" msgid "Create new" msgstr "Nieuw maken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52 msgctxt "@action:title" msgid "Summary - Cura Project" msgstr "Samenvatting - Cura-project" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100 msgctxt "@info:tooltip" msgid "How should the conflict in the machine be resolved?" msgstr "Hoe dient het conflict in de machine te worden opgelost?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88 msgctxt "@action:label" msgid "Printer settings" msgstr "Printerinstellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97 msgctxt "@action:label" msgid "Type" msgstr "Type" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112 msgctxt "@action:label" msgid "Printer Group" msgstr "Printergroep" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209 msgctxt "@info:tooltip" msgid "How should the conflict in the profile be resolved?" msgstr "Hoe dient het conflict in het profiel te worden opgelost?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213 msgctxt "@action:label" msgid "Profile settings" msgstr "Profielinstellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242 #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237 msgctxt "@action:label" msgid "Name" msgstr "Naam" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254 msgctxt "@action:label" msgid "Intent" msgstr "Intent" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221 msgctxt "@action:label" msgid "Not in profile" msgstr "Niet in profiel" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226 msgctxt "@action:label" msgid "%1 override" msgid_plural "%1 overrides" msgstr[0] "%1 overschrijving" msgstr[1] "%1 overschrijvingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297 msgctxt "@action:label" msgid "Derivative from" msgstr "Afgeleide van" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303 msgctxt "@action:label" msgid "%1, %2 override" msgid_plural "%1, %2 overrides" msgstr[0] "%1, %2 overschrijving" msgstr[1] "%1, %2 overschrijvingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325 msgctxt "@info:tooltip" msgid "How should the conflict in the material be resolved?" msgstr "Hoe dient het materiaalconflict te worden opgelost?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352 msgctxt "@action:label" msgid "Material settings" msgstr "Materiaalinstellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388 msgctxt "@action:label" msgid "Setting visibility" msgstr "Zichtbaarheid instellen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397 msgctxt "@action:label" msgid "Mode" msgstr "Modus" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413 msgctxt "@action:label" msgid "Visible settings:" msgstr "Zichtbare instellingen:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418 msgctxt "@action:label" msgid "%1 out of %2" msgstr "%1 van %2" #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439 msgctxt "@action:warning" msgid "Loading a project will clear all models on the build plate." msgstr "Als u een project laadt, worden alle modellen van het platform gewist." #: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456 msgctxt "@action:button" msgid "Open" msgstr "Openen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22 msgctxt "@button" msgid "Want more?" msgstr "Wilt u meer?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31 msgctxt "@button" msgid "Backup Now" msgstr "Nu back-up maken" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43 msgctxt "@checkbox:description" msgid "Auto Backup" msgstr "Auto back-up" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44 msgctxt "@checkbox:description" msgid "Automatically create a backup each day that Cura is started." msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21 msgctxt "@backuplist:label" msgid "Cura Version" msgstr "Cura-versie" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29 msgctxt "@backuplist:label" msgid "Machines" msgstr "Machines" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37 msgctxt "@backuplist:label" msgid "Materials" msgstr "Materialen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45 msgctxt "@backuplist:label" msgid "Profiles" msgstr "Profielen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53 msgctxt "@backuplist:label" msgid "Plugins" msgstr "Plug-ins" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64 msgctxt "@button" msgid "Restore" msgstr "Herstellen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93 msgctxt "@dialog:title" msgid "Delete Backup" msgstr "Back-up verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94 msgctxt "@dialog:info" msgid "Are you sure you want to delete this backup? This cannot be undone." msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102 msgctxt "@dialog:title" msgid "Restore Backup" msgstr "Back-up herstellen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103 msgctxt "@dialog:info" msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?" msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34 msgctxt "@description" msgid "Backup and synchronize your Cura settings." msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225 msgctxt "@button" msgid "Sign in" msgstr "Aanmelden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28 msgctxt "@title" msgid "My Backups" msgstr "Mijn back-ups" #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38 msgctxt "@empty_state" msgid "You don't have any backups currently. Use the 'Backup Now' button to create one." msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60 msgctxt "@backup_limit_info" msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones." msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken." #: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25 msgctxt "@title:window" msgid "Cura Backups" msgstr "Cura-back-ups" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17 msgctxt "@title:window" msgid "More information on anonymous data collection" msgstr "Meer informatie over anonieme gegevensverzameling" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74 msgctxt "@text:window" msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:" msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110 msgctxt "@text:window" msgid "I don't want to send anonymous data" msgstr "Ik wil geen anonieme gegevens verzenden" #: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119 msgctxt "@text:window" msgid "Allow sending anonymous data" msgstr "Verzenden van anonieme gegevens toestaan" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17 msgctxt "@title:window" msgid "Post Processing Plugin" msgstr "Plug-in voor Nabewerking" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57 msgctxt "@label" msgid "Post Processing Scripts" msgstr "Scripts voor Nabewerking" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221 msgctxt "@action" msgid "Add a script" msgstr "Een script toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257 msgctxt "@label" msgid "Settings" msgstr "Instellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466 msgctxt "@info:tooltip" msgid "Change active post-processing scripts." msgstr "Actieve scripts voor nabewerking wijzigen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470 msgctxt "@info:tooltip" msgid "The following script is active:" msgid_plural "The following scripts are active:" msgstr[0] "Het volgende script is actief:" msgstr[1] "De volgende scripts zijn actief:" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30 msgctxt "@label" msgid "Please select any upgrades made to this Ultimaker Original" msgstr "Selecteer eventuele upgrades die op deze Ultimaker Original zijn uitgevoerd" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41 msgctxt "@label" msgid "Heated Build Plate (official kit or self-built)" msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30 msgctxt "@title" msgid "Build Plate Leveling" msgstr "Platform Kalibreren" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44 msgctxt "@label" msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted." msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57 msgctxt "@label" msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle." msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen." #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75 msgctxt "@action:button" msgid "Start Build Plate Leveling" msgstr "Kalibratie Platform Starten" #: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87 msgctxt "@action:button" msgid "Move to Next Position" msgstr "Beweeg Naar de Volgende Positie" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21 msgctxt "@info" msgid "Ultimaker Verified Plug-in" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22 msgctxt "@info" msgid "Ultimaker Certified Material" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23 msgctxt "@info" msgid "Ultimaker Verified Package" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84 msgctxt "@title" msgid "Loading..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143 msgctxt "@button" msgid "Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151 msgctxt "@button" msgid "Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188 msgctxt "@info" msgid "Search in the browser" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266 msgctxt "@button" msgid "In order to use the package you will need to restart Cura" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274 msgctxt "@info:button, %1 is the application name" msgid "Quit %1" msgstr "Sluit %1" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165 msgctxt "@label" msgid "By" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199 msgctxt "@button" msgid "Enable" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199 msgctxt "@button" msgid "Disable" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217 msgctxt "@button" msgid "Downgrading..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218 msgctxt "@button" msgid "Downgrade" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222 msgctxt "@button" msgid "Installing..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223 msgctxt "@button" msgid "Install" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227 msgctxt "@button" msgid "Uninstall" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 msgctxt "@button" msgid "Updating..." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242 msgctxt "@button" msgid "Update" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8 msgctxt "@header" msgid "Install Plugins" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12 msgctxt "@text" msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32 msgctxt "@info:tooltip" msgid "Manage packages" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85 msgctxt "@header" msgid "Description" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117 msgctxt "@header" msgid "Compatible printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143 msgctxt "@info" msgid "No compatibility information" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162 msgctxt "@header" msgid "Compatible support materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188 msgctxt "@info No materials" msgid "None" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206 msgctxt "@header" msgid "Compatible with Material Station" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216 #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244 msgctxt "@info" msgid "Yes" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216 #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244 msgctxt "@info" msgid "No" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234 msgctxt "@header" msgid "Optimized for Air Manager" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260 msgctxt "@button" msgid "Visit plug-in website" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260 msgctxt "@button" msgid "Website" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269 msgctxt "@button" msgid "Buy spool" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278 msgctxt "@button" msgid "Safety datasheet" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287 msgctxt "@button" msgid "Technical datasheet" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15 msgctxt "@header" msgid "Package details" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40 msgctxt "@button:tooltip" msgid "Back" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16 msgctxt "@button" msgid "Plugin license agreement" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48 msgctxt "@text" msgid "Please read and agree with the plugin licence." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74 msgctxt "@button" msgid "Accept" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83 msgctxt "@button" msgid "Decline" msgstr "Nee, ik ga niet akkoord" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164 msgctxt "@button" msgid "Failed to load packages:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164 msgctxt "@button" msgid "Retry?" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180 msgctxt "@button" msgid "Loading" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196 msgctxt "@message" msgid "No more results to load" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196 msgctxt "@message" msgid "No results found with current filter" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239 msgctxt "@button" msgid "Load more" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11 msgctxt "@header" msgid "Manage packages" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15 msgctxt "@text" msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8 msgctxt "@header" msgid "Install Materials" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12 msgctxt "@text" msgid "Select and install material profiles optimised for your Ultimaker 3D printers." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42 msgctxt "@title:tab" msgid "Printer" msgstr "Printer" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63 msgctxt "@title:label" msgid "Nozzle Settings" msgstr "Nozzle-instellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75 msgctxt "@label" msgid "Nozzle size" msgstr "Maat nozzle" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283 msgctxt "@label" msgid "mm" msgstr "mm" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89 msgctxt "@label" msgid "Compatible material diameter" msgstr "Compatibele materiaaldiameter" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105 msgctxt "@label" msgid "Nozzle offset X" msgstr "Nozzle-offset X" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120 msgctxt "@label" msgid "Nozzle offset Y" msgstr "Nozzle-offset Y" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135 msgctxt "@label" msgid "Cooling Fan Number" msgstr "Nummer van koelventilator" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163 msgctxt "@title:label" msgid "Extruder Start G-code" msgstr "Start-G-code van extruder" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177 msgctxt "@title:label" msgid "Extruder End G-code" msgstr "Eind-G-code van extruder" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56 msgctxt "@title:label" msgid "Printer Settings" msgstr "Printerinstellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70 msgctxt "@label" msgid "X (Width)" msgstr "X (Breedte)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85 msgctxt "@label" msgid "Y (Depth)" msgstr "Y (Diepte)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100 msgctxt "@label" msgid "Z (Height)" msgstr "Z (Hoogte)" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114 msgctxt "@label" msgid "Build plate shape" msgstr "Vorm van het platform" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127 msgctxt "@label" msgid "Origin at center" msgstr "Centraal oorsprongpunt" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139 msgctxt "@label" msgid "Heated bed" msgstr "Verwarmd bed" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151 msgctxt "@label" msgid "Heated build volume" msgstr "Verwarmde werkvolume" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163 msgctxt "@label" msgid "G-code flavor" msgstr "Versie G-code" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187 msgctxt "@title:label" msgid "Printhead Settings" msgstr "Printkopinstellingen" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201 msgctxt "@label" msgid "X min" msgstr "X min" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221 msgctxt "@label" msgid "Y min" msgstr "Y min" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241 msgctxt "@label" msgid "X max" msgstr "X max" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261 msgctxt "@label" msgid "Y max" msgstr "Y max" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279 msgctxt "@label" msgid "Gantry Height" msgstr "Rijbrughoogte" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293 msgctxt "@label" msgid "Number of Extruders" msgstr "Aantal extruders" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345 msgctxt "@label" msgid "Apply Extruder offsets to GCode" msgstr "Pas extruderoffsets toe op GCode" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393 msgctxt "@title:label" msgid "Start G-code" msgstr "Start G-code" #: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404 msgctxt "@title:label" msgid "End G-code" msgstr "Eind G-code" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32 msgctxt "@label:button" msgid "My printers" msgstr "Mijn printers" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34 msgctxt "@tooltip:button" msgid "Monitor printers in Ultimaker Digital Factory." msgstr "Volg uw printers in Ultimaker Digital Factory." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41 msgctxt "@tooltip:button" msgid "Create print projects in Digital Library." msgstr "Maak printprojecten aan in Digital Library." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46 msgctxt "@label:button" msgid "Print jobs" msgstr "Printtaken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48 msgctxt "@tooltip:button" msgid "Monitor print jobs and reprint from your print history." msgstr "Volg printtaken en print opnieuw vanuit uw printgeschiedenis." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55 msgctxt "@tooltip:button" msgid "Extend Ultimaker Cura with plugins and material profiles." msgstr "Breid Ultimaker Cura uit met plug-ins en materiaalprofielen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62 msgctxt "@tooltip:button" msgid "Become a 3D printing expert with Ultimaker e-learning." msgstr "Word een 3D-printexpert met Ultimaker e-learning." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67 msgctxt "@label:button" msgid "Ultimaker support" msgstr "Ondersteuning van Ultimaker" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69 msgctxt "@tooltip:button" msgid "Learn how to get started with Ultimaker Cura." msgstr "Leer hoe u aan de slag gaat met Ultimaker Cura." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74 msgctxt "@label:button" msgid "Ask a question" msgstr "Stel een vraag" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76 msgctxt "@tooltip:button" msgid "Consult the Ultimaker Community." msgstr "Consulteer de Ultimaker Community." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81 msgctxt "@label:button" msgid "Report a bug" msgstr "Een fout melden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83 msgctxt "@tooltip:button" msgid "Let developers know that something is going wrong." msgstr "Laat ontwikkelaars weten dat er iets misgaat." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90 msgctxt "@tooltip:button" msgid "Visit the Ultimaker website." msgstr "Bezoek de Ultimaker-website." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16 msgctxt "@label %1 is filled in with the name of an extruder" msgid "Print Selected Model with %1" msgid_plural "Print Selected Models with %1" msgstr[0] "Geselecteerd model printen met %1" msgstr[1] "Geselecteerde modellen printen met %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&Settings" msgstr "In&stellingen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87 msgctxt "@title:window" msgid "New project" msgstr "Nieuw project" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88 msgctxt "@info:question" msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings." msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135 msgctxt "@action:button" msgid "Marketplace" msgstr "Marktplaats" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25 msgctxt "@label" msgid "Build plate" msgstr "Platform" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55 msgctxt "@tooltip" msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off." msgstr "De doeltemperatuur van het verwarmde bed. Het bed wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van het bed uitgeschakeld." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88 msgctxt "@tooltip" msgid "The current temperature of the heated bed." msgstr "De huidige temperatuur van het verwarmde bed." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the bed to." msgstr "De temperatuur waarnaar het bed moet worden voorverwarmd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271 msgctxt "@button Cancel pre-heating" msgid "Cancel" msgstr "Annuleren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274 msgctxt "@button" msgid "Pre-heat" msgstr "Voorverwarmen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286 msgctxt "@tooltip of pre-heat" msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print." msgstr "Verwarm het bed voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het bed wordt verwarmd. Zo hoeft u niet te wachten totdat het bed opgewarmd is wanneer u gereed bent om te printen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56 msgctxt "@info:status" msgid "The printer is not connected." msgstr "Er is geen verbinding met de printer." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51 msgctxt "@label" msgid "Printer control" msgstr "Printerbediening" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66 msgctxt "@label" msgid "Jog Position" msgstr "Jog-positie" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82 msgctxt "@label" msgid "X/Y" msgstr "X/Y" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162 msgctxt "@label" msgid "Z" msgstr "Z" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217 msgctxt "@label" msgid "Jog Distance" msgstr "Jog-afstand" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257 msgctxt "@label" msgid "Send G-code" msgstr "G-code verzenden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319 msgctxt "@tooltip of G-code command input" msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command." msgstr "Verzend een aangepaste G-code-opdracht naar de verbonden printer. Druk op Enter om de opdracht te verzenden." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40 msgctxt "@label" msgid "Extruder" msgstr "Extruder" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." msgstr "De doeltemperatuur van de hot-end. De hot-end wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van de hot-end uitgeschakeld." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105 msgctxt "@tooltip" msgid "The current temperature of this hotend." msgstr "De huidige temperatuur van dit hotend." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182 msgctxt "@tooltip of temperature input" msgid "The temperature to pre-heat the hotend to." msgstr "De temperatuur waarnaar het hotend moet worden voorverwarmd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297 msgctxt "@tooltip of pre-heat" msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print." msgstr "Verwarm het hotend voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het hotend wordt verwarmd. Zo hoeft u niet te wachten totdat het hotend is opgewarmd wanneer u gereed bent om te printen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335 msgctxt "@tooltip" msgid "The colour of the material in this extruder." msgstr "De kleur van het materiaal in deze extruder." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367 msgctxt "@tooltip" msgid "The material in this extruder." msgstr "Het materiaal in deze extruder." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400 msgctxt "@tooltip" msgid "The nozzle inserted in this extruder." msgstr "De nozzle die in deze extruder geplaatst is." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17 msgctxt "@title:window" msgid "Open project file" msgstr "Projectbestand openen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83 msgctxt "@text:window" msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?" msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91 msgctxt "@text:window" msgid "Remember my choice" msgstr "Mijn keuze onthouden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105 msgctxt "@action:button" msgid "Open as project" msgstr "Openen als project" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110 msgctxt "@action:button" msgid "Import models" msgstr "Modellen importeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14 msgctxt "@title:window" msgid "Save Project" msgstr "Project opslaan" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168 msgctxt "@action:label" msgid "Extruder %1" msgstr "Extruder %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184 msgctxt "@action:label" msgid "%1 & material" msgstr "%1 &materiaal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186 msgctxt "@action:label" msgid "Material" msgstr "Materiaal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275 msgctxt "@action:label" msgid "Don't show project summary on save again" msgstr "Bij opnieuw opslaan projectsamenvatting niet weergeven" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289 msgctxt "@action:button" msgid "Save" msgstr "Opslaan" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637 msgctxt "@title:window" msgid "Open file(s)" msgstr "Bestand(en) openen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47 msgctxt "@text:window" msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?" msgstr "Binnen de door u geselecteerde bestanden zijn een of meer projectbestanden aangetroffen. U kunt slechts één projectbestand tegelijk openen. Het wordt aangeraden alleen modellen uit deze bestanden te importeren. Wilt u verdergaan?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64 msgctxt "@action:button" msgid "Import all as models" msgstr "Allemaal als model importeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15 msgctxt "@title:window The argument is the application name." msgid "About %1" msgstr "Ongeveer %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57 msgctxt "@label" msgid "version: %1" msgstr "versie: %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72 msgctxt "@label" msgid "End-to-end solution for fused filament 3D printing." msgstr "End-to-end-oplossing voor fused filament 3D-printen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85 msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" msgstr "" "Cura is ontwikkeld door Ultimaker B.V. in samenwerking met de community.\n" "Cura maakt met trots gebruik van de volgende opensourceprojecten:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134 msgctxt "@label" msgid "Graphical user interface" msgstr "Grafische gebruikersinterface (GUI)" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135 msgctxt "@label" msgid "Application framework" msgstr "Toepassingskader" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136 msgctxt "@label" msgid "G-code generator" msgstr "G-code-generator" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137 msgctxt "@label" msgid "Interprocess communication library" msgstr "InterProcess Communication-bibliotheek" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139 msgctxt "@label" msgid "Programming language" msgstr "Programmeertaal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140 msgctxt "@label" msgid "GUI framework" msgstr "GUI-kader" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141 msgctxt "@label" msgid "GUI framework bindings" msgstr "Bindingen met GUI-kader" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142 msgctxt "@label" msgid "C/C++ Binding library" msgstr "Bindingenbibliotheek C/C++" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143 msgctxt "@label" msgid "Data interchange format" msgstr "Indeling voor gegevensuitwisseling" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144 msgctxt "@label" msgid "Support library for scientific computing" msgstr "Ondersteuningsbibliotheek voor wetenschappelijke berekeningen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145 msgctxt "@label" msgid "Support library for faster math" msgstr "Ondersteuningsbibliotheek voor snellere berekeningen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146 msgctxt "@label" msgid "Support library for handling STL files" msgstr "Ondersteuningsbibliotheek voor het verwerken van STL-bestanden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147 msgctxt "@label" msgid "Support library for handling triangular meshes" msgstr "Ondersteuningsbibliotheek voor het verwerken van driehoekig rasters" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148 msgctxt "@label" msgid "Support library for handling 3MF files" msgstr "Ondersteuningsbibliotheek voor het verwerken van 3MF-bestanden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149 msgctxt "@label" msgid "Support library for file metadata and streaming" msgstr "Ondersteuningsbibliotheek voor bestandsmetadata en streaming" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150 msgctxt "@label" msgid "Serial communication library" msgstr "Seriële-communicatiebibliotheek" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151 msgctxt "@label" msgid "ZeroConf discovery library" msgstr "ZeroConf-detectiebibliotheek" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152 msgctxt "@label" msgid "Polygon clipping library" msgstr "Bibliotheek met veelhoeken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153 msgctxt "@label" msgid "Python bindings for Clipper" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154 msgctxt "@Label" msgid "Static type checker for Python" msgstr "Statische typecontrole voor Python" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156 msgctxt "@Label" msgid "Root Certificates for validating SSL trustworthiness" msgstr "Rootcertificaten voor het valideren van SSL-betrouwbaarheid" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157 msgctxt "@Label" msgid "Python Error tracking library" msgstr "Python fouttraceringsbibliotheek" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158 msgctxt "@label" msgid "Polygon packing library, developed by Prusa Research" msgstr "Verpakkingsbibliotheek met veelhoeken, ontwikkeld door Prusa Research" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159 msgctxt "@label" msgid "Python bindings for libnest2d" msgstr "Pythonbindingen voor libnest2d" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160 msgctxt "@label" msgid "Support library for system keyring access" msgstr "Ondersteuningsbibliotheek voor toegang tot systeemkeyring" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161 msgctxt "@label" msgid "Python extensions for Microsoft Windows" msgstr "Pythonextensies voor Microsoft Windows" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162 msgctxt "@label" msgid "Font" msgstr "Lettertype" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163 msgctxt "@label" msgid "SVG icons" msgstr "SVG-pictogrammen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164 msgctxt "@label" msgid "Linux cross-distribution application deployment" msgstr "Implementatie van Linux-toepassing voor kruisdistributie" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14 msgctxt "@title:window" msgid "Discard or Keep changes" msgstr "Wijzigingen verwijderen of behouden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50 msgctxt "@text:window, %1 is a profile name" msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76 msgctxt "@title:column" msgid "Profile settings" msgstr "Profielinstellingen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78 msgctxt "@title:column" msgid "Current changes" msgstr "Huidige wijzigingen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798 msgctxt "@option:discardOrKeep" msgid "Always ask me this" msgstr "Altijd vragen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108 msgctxt "@option:discardOrKeep" msgid "Discard and never ask again" msgstr "Verwijderen en nooit meer vragen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109 msgctxt "@option:discardOrKeep" msgid "Keep and never ask again" msgstr "Behouden en nooit meer vragen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139 msgctxt "@action:button" msgid "Discard changes" msgstr "Wijzigingen verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145 msgctxt "@action:button" msgid "Keep changes" msgstr "Wijzigingen behouden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18 msgctxt "@label" msgid "No items to select from" msgstr "Geen items om uit te kiezen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open File(s)..." msgstr "Bestand(en) openen..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Open &Recent" msgstr "&Recente bestanden openen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16 msgctxt "@action:inmenu" msgid "Visible Settings" msgstr "Zichtbare instellingen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45 msgctxt "@action:inmenu" msgid "Collapse All Categories" msgstr "Alle categorieën samenvouwen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54 msgctxt "@action:inmenu" msgid "Manage Setting Visibility..." msgstr "Instelling voor zichtbaarheid beheren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34 msgctxt "@title:menu" msgid "&Material" msgstr "&Materiaal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49 msgctxt "@action:inmenu" msgid "Set as Active Extruder" msgstr "Instellen als Actieve Extruder" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55 msgctxt "@action:inmenu" msgid "Enable Extruder" msgstr "Extruder inschakelen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63 msgctxt "@action:inmenu" msgid "Disable Extruder" msgstr "Extruder uitschakelen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13 msgctxt "@label:category menu label" msgid "Material" msgstr "Materiaal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53 msgctxt "@label:category menu label" msgid "Favorites" msgstr "Favorieten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78 msgctxt "@label:category menu label" msgid "Generic" msgstr "Standaard" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14 msgctxt "@title:menu menubar:toplevel" msgid "&Help" msgstr "&Help" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&File" msgstr "&Bestand" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44 msgctxt "@title:menu menubar:file" msgid "&Save Project..." msgstr "&Project opslaan..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77 msgctxt "@title:menu menubar:file" msgid "&Export..." msgstr "&Exporteren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88 msgctxt "@action:inmenu menubar:file" msgid "Export Selection..." msgstr "Selectie Exporteren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21 msgctxt "@title:menu menubar:toplevel" msgid "P&references" msgstr "Voo&rkeuren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12 msgctxt "@title:menu menubar:toplevel" msgid "&Edit" msgstr "B&ewerken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13 msgctxt "@title:menu menubar:settings" msgid "&Printer" msgstr "&Printer" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17 msgctxt "@label:category menu label" msgid "Network enabled printers" msgstr "Netwerkprinters" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50 msgctxt "@label:category menu label" msgid "Local printers" msgstr "Lokale printers" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "E&xtensions" msgstr "E&xtensies" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18 msgctxt "@header" msgid "Configurations" msgstr "Configuraties" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52 msgctxt "@label" msgid "Loading available configurations from the printer..." msgstr "Beschikbare configuraties laden vanaf de printer..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53 msgctxt "@label" msgid "The configurations are not available because the printer is disconnected." msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137 msgctxt "@label" msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile." msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138 msgctxt "@label" msgid "Marketplace" msgstr "Marktplaats" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101 msgctxt "@tooltip" msgid "The configuration of this extruder is not allowed, and prohibits slicing." msgstr "De configuratie van deze extruder is niet toegestaan en verhindert slicen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105 msgctxt "@tooltip" msgid "There are no profiles matching the configuration of this extruder." msgstr "Er zijn geen profielen die compatibel zijn met de configuratie van deze extruder." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245 msgctxt "@label" msgid "Select configuration" msgstr "Configuratie selecteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354 msgctxt "@label" msgid "Configurations" msgstr "Configuraties" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27 msgctxt "@header" msgid "Custom" msgstr "Aangepast" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62 msgctxt "@label" msgid "Printer" msgstr "Printer" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214 msgctxt "@label" msgid "Enabled" msgstr "Ingeschakeld" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263 msgctxt "@label" msgid "Material" msgstr "Materiaal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391 msgctxt "@label" msgid "Use glue for better adhesion with this material combination." msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29 msgctxt "@label" msgid "Print Selected Model With:" msgid_plural "Print Selected Models With:" msgstr[0] "Geselecteerd model printen met:" msgstr[1] "Geselecteerde modellen printen met:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92 msgctxt "@title:window" msgid "Multiply Selected Model" msgid_plural "Multiply Selected Models" msgstr[0] "Geselecteerd model verveelvoudigen" msgstr[1] "Geselecteerde modellen verveelvoudigen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123 msgctxt "@label" msgid "Number of Copies" msgstr "Aantal exemplaren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15 msgctxt "@title:menu menubar:file" msgid "Save Project..." msgstr "Project opslaan..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13 msgctxt "@title:menu menubar:toplevel" msgid "&View" msgstr "Beel&d" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" msgstr "&Camerapositie" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30 msgctxt "@action:inmenu menubar:view" msgid "Camera view" msgstr "Camerabeeld" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48 msgctxt "@action:inmenu menubar:view" msgid "Perspective" msgstr "Perspectief" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59 msgctxt "@action:inmenu menubar:view" msgid "Orthographic" msgstr "Orthografisch" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50 msgctxt "@label" msgid "View type" msgstr "Type weergeven" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64 msgctxt "@label" msgid "Sign in to the Ultimaker platform" msgstr "Meld u aan op het Ultimaker-platform" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39 msgctxt "@text" msgid "" "- Add material profiles and plug-ins from the Marketplace\n" "- Back-up and sync your material profiles and plug-ins\n" "- Share ideas and get help from 48,000+ users in the Ultimaker community" msgstr "" "- Voeg materiaalprofielen en plug-ins toe uit de Marktplaats\n" "- Maak back-ups van uw materiaalprofielen en plug-ins en synchroniseer deze\n" "- Deel ideeën met 48.000+ gebruikers in de Ultimaker-community of vraag hen om ondersteuning" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58 msgctxt "@button" msgid "Create a free Ultimaker account" msgstr "Maak een gratis Ultimaker-account aan" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24 msgctxt "@action:button" msgid "Sign in" msgstr "Aanmelden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77 msgctxt "@label The argument is a timestamp" msgid "Last update: %1" msgstr "Laatste update: %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104 msgctxt "@button" msgid "Ultimaker Account" msgstr "Ultimaker-account" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120 msgctxt "@button" msgid "Sign Out" msgstr "Afmelden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28 msgctxt "@label" msgid "Checking..." msgstr "Aan het controleren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35 msgctxt "@label" msgid "Account synced" msgstr "Account gesynchroniseerd" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42 msgctxt "@label" msgid "Something went wrong..." msgstr "Er is een fout opgetreden..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95 msgctxt "@button" msgid "Install pending updates" msgstr "Updates in afwachting installeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116 msgctxt "@button" msgid "Check for account updates" msgstr "Controleren op accountupdates" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54 msgctxt "@label:PrintjobStatus" msgid "Slicing..." msgstr "Slicen..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81 msgctxt "@label:PrintjobStatus" msgid "Unable to slice" msgstr "Kan niet slicen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120 msgctxt "@button" msgid "Processing" msgstr "Verwerken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120 msgctxt "@button" msgid "Slice" msgstr "Slicen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121 msgctxt "@label" msgid "Start the slicing process" msgstr "Het sliceproces starten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137 msgctxt "@button" msgid "Cancel" msgstr "Annuleren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31 msgctxt "@label" msgid "Time estimation" msgstr "Tijdschatting" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114 msgctxt "@label" msgid "Material estimation" msgstr "Materiaalschatting" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164 msgctxt "@label m for meter" msgid "%1m" msgstr "%1 m" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165 msgctxt "@label g for grams" msgid "%1g" msgstr "%1 g" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59 msgctxt "@label" msgid "No time estimation available" msgstr "Geen tijdschatting beschikbaar" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77 msgctxt "@label" msgid "No cost estimation available" msgstr "Geen kostenraming beschikbaar" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127 msgctxt "@button" msgid "Preview" msgstr "Voorbeeld" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253 msgctxt "@label" msgid "This package will be installed after restarting." msgstr "Dit package wordt na opnieuw starten geïnstalleerd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14 msgctxt "@title:tab" msgid "General" msgstr "Algemeen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466 msgctxt "@title:tab" msgid "Settings" msgstr "Instellingen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16 msgctxt "@title:tab" msgid "Printers" msgstr "Printers" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70 msgctxt "@title:tab" msgid "Materials" msgstr "Materialen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56 msgctxt "@title:tab" msgid "Profiles" msgstr "Profielen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589 msgctxt "@title:window %1 is the application name" msgid "Closing %1" msgstr "%1 wordt gesloten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599 msgctxt "@label %1 is the application name" msgid "Are you sure you want to exit %1?" msgstr "Weet u zeker dat u %1 wilt afsluiten?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747 msgctxt "@window:title" msgid "Install Package" msgstr "Package installeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754 msgctxt "@title:window" msgid "Open File(s)" msgstr "Bestand(en) openen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756 msgctxt "@text:window" msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one." msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836 msgctxt "@title:window" msgid "Add Printer" msgstr "Printer Toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844 msgctxt "@title:window" msgid "What's New" msgstr "Nieuwe functies" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13 msgctxt "@label:Should be short" msgid "On" msgstr "Aan" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14 msgctxt "@label:Should be short" msgid "Off" msgstr "Uit" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34 msgctxt "@label" msgid "Experimental" msgstr "Experimenteel" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642 msgctxt "@label" msgid "Print settings" msgstr "Instellingen voor printen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21 msgctxt "@label shown when we load a Gcode file" msgid "Print setup disabled. G-code file can not be modified." msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144 msgctxt "@button" msgid "Recommended" msgstr "Aanbevolen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158 msgctxt "@button" msgid "Custom" msgstr "Aangepast" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31 msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')" msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead" msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead" msgstr[0] "Er is geen %1 profiel voor de configuratie in extruder %2. In plaats daarvan wordt de standaardintentie gebruikt" msgstr[1] "Er is geen %1 profiel voor de configuraties in extruders %2. In plaats daarvan wordt de standaardintentie gebruikt" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195 msgctxt "@label" msgid "Gradual infill" msgstr "Geleidelijke vulling" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233 msgctxt "@label" msgid "Gradual infill will gradually increase the amount of infill towards the top." msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28 msgctxt "@label" msgid "Support" msgstr "Supportstructuur" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69 msgctxt "@label" msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing." msgstr "Genereer structuren om delen van het model met overhang te ondersteunen. Zonder deze structuren zakken dergelijke delen in tijdens het printen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779 msgctxt "@label" msgid "Profiles" msgstr "Profielen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80 msgctxt "@tooltip" msgid "You have modified some profile settings. If you want to change these go to custom mode." msgstr "U hebt enkele profielinstellingen aangepast. Ga naar de aangepaste modus als u deze wilt wijzigen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27 msgctxt "@label" msgid "Adhesion" msgstr "Hechting" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72 msgctxt "@label" msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards." msgstr "Het printen van een brim of raft inschakelen. Deze optie zorgt ervoor dat er extra materiaal rondom of onder het object wordt neergelegd, dat er naderhand eenvoudig kan worden afgesneden." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158 msgctxt "@label:header" msgid "Custom profiles" msgstr "Aangepaste profielen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147 msgctxt "@action:button" msgid "Discard current changes" msgstr "Huidige wijzigingen verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46 msgctxt "@label" msgid "Profile" msgstr "Profiel" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157 msgctxt "@tooltip" msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." msgstr "" "Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n" "\n" "Klik om het profielbeheer te openen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37 msgctxt "@title:column" msgid "Setting" msgstr "Instelling" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38 msgctxt "@title:column" msgid "Profile" msgstr "Profiel" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39 msgctxt "@title:column" msgid "Current" msgstr "Huidig" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40 msgctxt "@title:column Unit of measurement" msgid "Unit" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22 msgctxt "@title:window" msgid "Rename" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23 msgctxt "@info" msgid "Please provide a new name." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56 msgctxt "@item:tooltip" msgid "This setting has been hidden by the active machine and will not be visible." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73 msgctxt "@item:tooltip %1 is list of setting names" msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible." msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible." msgstr[0] "" msgstr[1] "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13 msgctxt "@title:tab" msgid "Setting Visibility" msgstr "Zichtbaarheid Instellen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131 msgctxt "@action:button" msgid "Defaults" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53 msgctxt "@label:textbox" msgid "Check all" msgstr "Alles aanvinken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49 msgctxt "@action:button" msgid "Add New" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293 msgctxt "@action:button" msgid "Activate" msgstr "Activeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330 msgctxt "@action:button" msgid "Rename" msgstr "Hernoemen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121 msgctxt "@title:window" msgid "Confirm Diameter Change" msgstr "Diameterwijziging bevestigen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122 msgctxt "@label (%1 is a number)" msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?" msgstr "Het nieuwe filament is ingesteld op %1 mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152 msgctxt "@label" msgid "Display Name" msgstr "Naam" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171 msgctxt "@label" msgid "Brand" msgstr "Merk" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190 msgctxt "@label" msgid "Material Type" msgstr "Type Materiaal" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209 msgctxt "@label" msgid "Color" msgstr "Kleur" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261 msgctxt "@title" msgid "Material color picker" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274 msgctxt "@label" msgid "Properties" msgstr "Eigenschappen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285 msgctxt "@label" msgid "Density" msgstr "Dichtheid" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318 msgctxt "@label" msgid "Diameter" msgstr "Diameter" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368 msgctxt "@label" msgid "Filament Cost" msgstr "Kostprijs Filament" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400 msgctxt "@label" msgid "Filament weight" msgstr "Gewicht filament" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432 msgctxt "@label" msgid "Filament length" msgstr "Lengte filament" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450 msgctxt "@label" msgid "Cost per Meter" msgstr "Kostprijs per meter" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464 msgctxt "@label" msgid "This material is linked to %1 and shares some of its properties." msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471 msgctxt "@label" msgid "Unlink Material" msgstr "Materiaal ontkoppelen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484 msgctxt "@label" msgid "Description" msgstr "Beschrijving" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502 msgctxt "@label" msgid "Adhesion Information" msgstr "Gegevens Hechting" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637 msgctxt "@title" msgid "Information" msgstr "Informatie" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17 msgctxt "@title:window" msgid "Sync materials with printers" msgstr "Synchroniseer materialen met printers" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48 msgctxt "@title:header" msgid "Sync materials with printers" msgstr "Synchroniseer materialen met printers" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54 msgctxt "@text" msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers." msgstr "Met een paar simpele stappen kunt u al uw materiaalprofielen synchroniseren met uw printers." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76 msgctxt "@button" msgid "Why do I need to sync material profiles?" msgstr "Waarom moet ik materiaalprofielen synchroniseren?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85 msgctxt "@button" msgid "Start" msgstr "Starten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127 msgctxt "@title:header" msgid "Sign in" msgstr "Aanmelden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133 msgctxt "@text" msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura." msgstr "Om de materiaalprofielen automatisch te synchroniseren met alle printers die op Digital Factory zijn aangesloten, moet u zich aanmelden bij Cura." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587 msgctxt "@button" msgid "Sync materials with USB" msgstr "Materialen synchroniseren met USB" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190 msgctxt "@title:header" msgid "The following printers will receive the new material profiles:" msgstr "De volgende printers ontvangen de nieuwe materiaalprofielen:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197 msgctxt "@title:header" msgid "Something went wrong when sending the materials to the printers." msgstr "Er is iets misgegaan bij het verzenden van de materialen naar de printers." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204 msgctxt "@title:header" msgid "Material profiles successfully synced with the following printers:" msgstr "Materiaalprofielen zijn gesynchroniseerd met de volgende printers:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429 msgctxt "@button" msgid "Troubleshooting" msgstr "Probleemoplossing" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406 msgctxt "@text Asking the user whether printers are missing in a list." msgid "Printers missing?" msgstr "Ontbreken er printers?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408 msgctxt "@text" msgid "Make sure all your printers are turned ON and connected to Digital Factory." msgstr "Controleer of alle printers zijn ingeschakeld en zijn aangesloten op Digital Factory." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417 msgctxt "@button" msgid "Refresh List" msgstr "Lijst vernieuwen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457 msgctxt "@button" msgid "Try again" msgstr "Probeer het opnieuw" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698 msgctxt "@button" msgid "Done" msgstr "Klaar" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607 msgctxt "@button" msgid "Sync" msgstr "Synchroniseren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519 msgctxt "@button" msgid "Syncing" msgstr "Synchroniseren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537 msgctxt "@title:header" msgid "No printers found" msgstr "Geen printers gevonden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558 msgctxt "@text" msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware." msgstr "Mogelijk zijn er geen compatibele printers op Digital Factory aangesloten. Controleer of de printer is aangesloten en de nieuwste firmware op de printer is geïnstalleerd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570 msgctxt "@button" msgid "Learn how to connect your printer to Digital Factory" msgstr "Meer informatie over het aansluiten van de printer op Digital Factory" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598 msgctxt "@button" msgid "Refresh" msgstr "Vernieuwen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627 msgctxt "@title:header" msgid "Sync material profiles via USB" msgstr "Materiaalprofielen synchroniseren via USB" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633 msgctxt "@text In the UI this is followed by a list of steps the user needs to take." msgid "Follow the following steps to load the new material profiles to your printer." msgstr "Volg onderstaande stappen om nieuwe materiaalprofielen op uw printer te laden." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665 msgctxt "@text" msgid "Click the export material archive button." msgstr "Klik op de knop Materiaalarchief exporteren." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666 msgctxt "@text" msgid "Save the .umm file on a USB stick." msgstr "Bewaar het .umm-bestand op een USB-stick." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667 msgctxt "@text" msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles." msgstr "Steek de USB-stick in de printer en start de procedure om nieuwe materiaalprofielen te laden." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675 msgctxt "@button" msgid "How to load new material profiles to my printer" msgstr "Hoe u nieuwe materiaalprofielen laadt op Mijn printer" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334 msgctxt "@button" msgid "Back" msgstr "Terug" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698 msgctxt "@button" msgid "Export material archive" msgstr "Materiaalarchief exporteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733 msgctxt "@title:window" msgid "Export All Materials" msgstr "Alle materialen exporteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72 msgctxt "@label" msgid "Materials compatible with active printer:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93 msgctxt "@action:button" msgid "Create new" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87 msgctxt "@action:button" msgid "Import" msgstr "Importeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101 msgctxt "@action:button" msgid "Sync with Printers" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310 msgctxt "@action:button" msgid "Duplicate" msgstr "Dupliceren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341 msgctxt "@action:button" msgid "Export" msgstr "Exporteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386 msgctxt "@title:window" msgid "Confirm Remove" msgstr "Verwijderen Bevestigen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387 msgctxt "@label (%1 is object name)" msgid "Are you sure you wish to remove %1? This cannot be undone!" msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238 msgctxt "@title:window" msgid "Import Material" msgstr "Materiaal Importeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" msgstr "Materiaal %1 is geïmporteerd" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" msgstr "Kon materiaal %1 niet importeren: %2" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265 msgctxt "@title:window" msgid "Export Material" msgstr "Materiaal Exporteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" msgstr "Exporteren van materiaal naar %1 is mislukt: %2" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" msgstr "Materiaal is geëxporteerd naar %1" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58 msgctxt "@label" msgid "Profiles compatible with active printer:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97 msgctxt "@action:tooltip" msgid "Create new profile from current settings/overrides" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124 msgctxt "@action:label" msgid "Some settings from current profile were overwritten." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139 msgctxt "@action:button" msgid "Update profile." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142 msgctxt "@action:tooltip" msgid "Update profile with current settings/overrides" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157 msgctxt "@action:label" msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below." msgstr "Dit profiel gebruikt de standaardinstellingen die door de printer zijn opgegeven, dus er zijn hiervoor geen instellingen/overschrijvingen in de onderstaande lijst." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164 msgctxt "@action:label" msgid "Your current settings match the selected profile." msgstr "Uw huidige instellingen komen overeen met het geselecteerde profiel." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174 msgctxt "@title:tab" msgid "Global Settings" msgstr "Algemene Instellingen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277 msgctxt "@title:window" msgid "Create Profile" msgstr "Profiel Maken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279 msgctxt "@info" msgid "Please provide a name for this profile." msgstr "Geef een naam op voor dit profiel." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362 msgctxt "@title:window" msgid "Export Profile" msgstr "Profiel Exporteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376 msgctxt "@title:window" msgid "Duplicate Profile" msgstr "Profiel Dupliceren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403 msgctxt "@title:window" msgid "Rename Profile" msgstr "Profiel Hernoemen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423 msgctxt "@title:window" msgid "Import Profile" msgstr "Profiel Importeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169 msgctxt "@label" msgid "Interface" msgstr "Interface" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213 msgctxt "@heading" msgid "-- incomplete --" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258 msgctxt "@label" msgid "Currency:" msgstr "Valuta:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273 msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed." msgid "Theme*:" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319 msgctxt "@info:tooltip" msgid "Slice automatically when changing settings." msgstr "Automatisch slicen bij wijzigen van instellingen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327 msgctxt "@option:check" msgid "Slice automatically" msgstr "Automatisch slicen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336 msgctxt "@label" msgid "*You will need to restart the application for these changes to have effect." msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351 msgctxt "@label" msgid "Viewport behavior" msgstr "Gedrag kijkvenster" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359 msgctxt "@info:tooltip" msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly." msgstr "Geef niet-ondersteunde gedeelten van het model een rode markering. Zonder ondersteuning zullen deze gedeelten niet goed worden geprint." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368 msgctxt "@option:check" msgid "Display overhang" msgstr "Overhang weergeven" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378 msgctxt "@info:tooltip" msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry." msgstr "Markeer ontbrekende of ongebruikelijke oppervlakken van het model met behulp van waarschuwingstekens. De toolpaths zullen vaak delen van de beoogde geometrie missen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387 msgctxt "@option:check" msgid "Display model errors" msgstr "Modelfouten weergeven" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395 msgctxt "@info:tooltip" msgid "Moves the camera so the model is in the center of the view when a model is selected" msgstr "Verplaatst de camera zodanig dat wanneer een model wordt geselecteerd, het model in het midden van het beeld wordt weergegeven" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400 msgctxt "@action:button" msgid "Center camera when item is selected" msgstr "Camera centreren wanneer een item wordt geselecteerd" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410 msgctxt "@info:tooltip" msgid "Should the default zoom behavior of cura be inverted?" msgstr "Moet het standaard zoomgedrag van Cura worden omgekeerd?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415 msgctxt "@action:button" msgid "Invert the direction of camera zoom." msgstr "Keer de richting van de camerazoom om." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431 msgctxt "@info:tooltip" msgid "Should zooming move in the direction of the mouse?" msgstr "Moet het zoomen in de richting van de muis gebeuren?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431 msgctxt "@info:tooltip" msgid "Zooming towards the mouse is not supported in the orthographic perspective." msgstr "Zoomen in de richting van de muis wordt niet ondersteund in het orthografische perspectief." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436 msgctxt "@action:button" msgid "Zoom toward mouse direction" msgstr "Zoomen in de richting van de muis" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462 msgctxt "@info:tooltip" msgid "Should models on the platform be moved so that they no longer intersect?" msgstr "Moeten modellen op het platform zodanig worden verplaatst dat ze elkaar niet meer doorsnijden?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467 msgctxt "@option:check" msgid "Ensure models are kept apart" msgstr "Modellen gescheiden houden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476 msgctxt "@info:tooltip" msgid "Should models on the platform be moved down to touch the build plate?" msgstr "Moeten modellen in het printgebied omlaag worden gebracht zodat ze het platform raken?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481 msgctxt "@option:check" msgid "Automatically drop models to the build plate" msgstr "Modellen automatisch op het platform laten vallen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493 msgctxt "@info:tooltip" msgid "Show caution message in g-code reader." msgstr "Toon het waarschuwingsbericht in de G-code-lezer." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502 msgctxt "@option:check" msgid "Caution message in g-code reader" msgstr "Waarschuwingsbericht in de G-code-lezer" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510 msgctxt "@info:tooltip" msgid "Should layer be forced into compatibility mode?" msgstr "Moet de laag in de compatibiliteitsmodus worden geforceerd?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515 msgctxt "@option:check" msgid "Force layer view compatibility mode (restart required)" msgstr "Compatibiliteitsmodus voor laagweergave forceren (opnieuw opstarten vereist)" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525 msgctxt "@info:tooltip" msgid "Should Cura open at the location it was closed?" msgstr "Moet Cura openen op de locatie waar het gesloten werd?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530 msgctxt "@option:check" msgid "Restore window position on start" msgstr "Herstel de vensterpositie bij het opstarten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540 msgctxt "@info:tooltip" msgid "What type of camera rendering should be used?" msgstr "Welk type cameraweergave moet worden gebruikt?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547 msgctxt "@window:text" msgid "Camera rendering:" msgstr "Cameraweergave:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554 msgid "Perspective" msgstr "Perspectief" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555 msgid "Orthographic" msgstr "Orthografisch" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595 msgctxt "@label" msgid "Opening and saving files" msgstr "Bestanden openen en opslaan" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602 msgctxt "@info:tooltip" msgid "Should opening files from the desktop or external applications open in the same instance of Cura?" msgstr "Wilt u dat bestanden vanaf de desktop of externe toepassingen in dezelfde instantie van Cura worden geopend?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607 msgctxt "@option:check" msgid "Use a single instance of Cura" msgstr "Gebruik één instantie van Cura" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618 msgctxt "@info:tooltip" msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?" msgstr "Moet het platform worden leeggemaakt voordat u een nieuw model laadt in de dezelfde instantie van Cura?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624 msgctxt "@option:check" msgid "Clear buildplate before loading model into the single instance" msgstr "Maak platform leeg voordat u een model laadt in dezelfde instantie" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634 msgctxt "@info:tooltip" msgid "Should models be scaled to the build volume if they are too large?" msgstr "Moeten modellen worden geschaald naar het werkvolume als ze te groot zijn?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639 msgctxt "@option:check" msgid "Scale large models" msgstr "Grote modellen schalen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649 msgctxt "@info:tooltip" msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?" msgstr "Een model wordt mogelijk extreem klein weergegeven als de eenheden bijvoorbeeld in meters zijn in plaats van in millimeters. Moeten dergelijke modellen worden opgeschaald?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654 msgctxt "@option:check" msgid "Scale extremely small models" msgstr "Extreem kleine modellen schalen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664 msgctxt "@info:tooltip" msgid "Should models be selected after they are loaded?" msgstr "Moeten modellen worden geselecteerd nadat ze zijn geladen?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669 msgctxt "@option:check" msgid "Select models when loaded" msgstr "Modellen selecteren wanneer ze geladen zijn" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679 msgctxt "@info:tooltip" msgid "Should a prefix based on the printer name be added to the print job name automatically?" msgstr "Moet er automatisch een op de printernaam gebaseerde voorvoegsel aan de naam van de printtaak worden toegevoegd?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684 msgctxt "@option:check" msgid "Add machine prefix to job name" msgstr "Machinevoorvoegsel toevoegen aan taaknaam" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694 msgctxt "@info:tooltip" msgid "Should a summary be shown when saving a project file?" msgstr "Dient er een samenvatting te worden weergegeven wanneer een projectbestand wordt opgeslagen?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698 msgctxt "@option:check" msgid "Show summary dialog when saving project" msgstr "Dialoogvenster voor samenvatting weergeven tijdens het opslaan van een project" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708 msgctxt "@info:tooltip" msgid "Default behavior when opening a project file" msgstr "Standaardgedrag tijdens het openen van een projectbestand" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716 msgctxt "@window:text" msgid "Default behavior when opening a project file: " msgstr "Standaardgedrag tijdens het openen van een projectbestand: " #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731 msgctxt "@option:openProject" msgid "Always ask me this" msgstr "Altijd vragen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732 msgctxt "@option:openProject" msgid "Always open as a project" msgstr "Altijd als project openen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733 msgctxt "@option:openProject" msgid "Always import models" msgstr "Altijd modellen importeren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770 msgctxt "@info:tooltip" msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again." msgstr "Wanneer u wijzigingen hebt aangebracht aan een profiel en naar een ander profiel wisselt, wordt een dialoogvenster weergegeven waarin u wordt gevraagd of u de aanpassingen wilt behouden. U kunt ook een standaardgedrag kiezen en het dialoogvenster nooit meer laten weergeven." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784 msgctxt "@window:text" msgid "Default behavior for changed setting values when switching to a different profile: " msgstr "Standaardgedrag voor gewijzigde instellingen wanneer er naar een ander profiel wordt overgeschakeld: " #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799 msgctxt "@option:discardOrKeep" msgid "Always discard changed settings" msgstr "Gewijzigde instellingen altijd verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800 msgctxt "@option:discardOrKeep" msgid "Always transfer changed settings to new profile" msgstr "Gewijzigde instellingen altijd naar nieuw profiel overbrengen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834 msgctxt "@label" msgid "Privacy" msgstr "Privacy" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840 msgctxt "@info:tooltip" msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored." msgstr "Mogen anonieme gegevens over uw print naar Ultimaker worden verzonden? Opmerking: er worden geen modellen, IP-adressen of andere persoonlijk identificeerbare gegevens verzonden of opgeslagen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845 msgctxt "@option:check" msgid "Send (anonymous) print information" msgstr "(Anonieme) printgegevens verzenden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875 msgctxt "@label" msgid "Updates" msgstr "Updates" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882 msgctxt "@info:tooltip" msgid "Should Cura check for updates when the program is started?" msgstr "Moet Cura op updates controleren wanneer het programma wordt gestart?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887 msgctxt "@option:check" msgid "Check for updates on start" msgstr "Bij starten op updates controleren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903 msgctxt "@info:tooltip" msgid "When checking for updates, only check for stable releases." msgstr "Kijk bij het controleren op updates alleen naar stabiele releases." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909 msgctxt "@option:radio" msgid "Stable releases only" msgstr "Alleen stabiele releases" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919 msgctxt "@info:tooltip" msgid "When checking for updates, check for both stable and for beta releases." msgstr "Kijk bij het controleren op updates naar stabiele releases en bèta-releases." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925 msgctxt "@option:radio" msgid "Stable and Beta releases" msgstr "Stabiele releases en bèta-releases" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935 msgctxt "@info:tooltip" msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!" msgstr "Moet er elke keer dat Cura wordt opgestart automatisch worden gecontroleerd op nieuwe plug-ins? Wij raden u ten zeerste aan dit niet uit te schakelen!" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940 msgctxt "@option:check" msgid "Get notifications for plugin updates" msgstr "Meldingen ontvangen als er updates zijn voor pug-ins" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70 msgctxt "@label" msgid "Add printer by IP address" msgstr "Een printer toevoegen op IP-adres" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133 msgctxt "@text" msgid "Enter your printer's IP address." msgstr "Voer het IP-adres van uw printer in." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158 msgctxt "@button" msgid "Add" msgstr "Toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206 msgctxt "@label" msgid "Could not connect to device." msgstr "Kan geen verbinding maken met het apparaat." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212 msgctxt "@label" msgid "Can't connect to your Ultimaker printer?" msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211 msgctxt "@label" msgid "The printer at this address has not responded yet." msgstr "De printer op dit adres heeft nog niet gereageerd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245 msgctxt "@label" msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group." msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347 msgctxt "@button" msgid "Connect" msgstr "Verbinding maken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24 msgctxt "@label" msgid "Release Notes" msgstr "Release notes" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23 msgctxt "@label" msgid "User Agreement" msgstr "Gebruikersovereenkomst" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53 msgctxt "@button" msgid "Agree" msgstr "Akkoord" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67 msgctxt "@button" msgid "Decline and close" msgstr "Afwijzen en sluiten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29 msgctxt "@label" msgid "What's New" msgstr "Nieuwe functies" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 msgctxt "@button" msgid "Next" msgstr "Volgende" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47 msgctxt "@label" msgid "Add a Cloud printer" msgstr "Een cloudprinter toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74 msgctxt "@label" msgid "Waiting for Cloud response" msgstr "Wachten op cloudreactie" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86 msgctxt "@label" msgid "No printers found in your account?" msgstr "Geen printers gevonden in uw account?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121 msgctxt "@label" msgid "The following printers in your account have been added in Cura:" msgstr "De volgende printers in uw account zijn toegevoegd in Cura:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194 msgctxt "@button" msgid "Add printer manually" msgstr "Printer handmatig toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124 msgctxt "@text" msgid "Add material settings and plugins from the Marketplace" msgstr "Voeg materiaalinstellingen en plugins uit de Marktplaats toe" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154 msgctxt "@text" msgid "Backup and sync your material settings and plugins" msgstr "Maak een back-up van uw materiaalinstellingen en plug-ins en synchroniseer deze" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184 msgctxt "@text" msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community" msgstr "Deel ideeën met 48,000+ gebruikers in de Ultimaker Community of vraag hen om ondersteuning" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202 msgctxt "@button" msgid "Skip" msgstr "Overslaan" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214 msgctxt "@text" msgid "Create a free Ultimaker Account" msgstr "Maak een gratis Ultimaker-account aan" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56 msgctxt "@label" msgid "Welcome to Ultimaker Cura" msgstr "Welkom bij Ultimaker Cura" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68 msgctxt "@text" msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments." msgstr "" "Volg deze stappen voor het instellen van\n" "Ultimaker Cura. Dit duurt slechts even." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86 msgctxt "@button" msgid "Get started" msgstr "Aan de slag" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93 msgctxt "@label" msgid "Empty" msgstr "Leeg" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206 msgctxt "@label" msgid "Manufacturer" msgstr "Fabrikant" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217 msgctxt "@label" msgid "Profile author" msgstr "Profieleigenaar" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229 msgctxt "@label" msgid "Printer name" msgstr "Printernaam" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235 msgctxt "@text" msgid "Please name your printer" msgstr "Geef uw printer een naam" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24 msgctxt "@label" msgid "Add a printer" msgstr "Een printer toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39 msgctxt "@label" msgid "Add a networked printer" msgstr "Een netwerkprinter toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88 msgctxt "@label" msgid "Add a non-networked printer" msgstr "Een niet-netwerkprinter toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43 msgctxt "@label" msgid "There is no printer found over your network." msgstr "Kan in uw netwerk geen printer vinden." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162 msgctxt "@label" msgid "Refresh" msgstr "Vernieuwen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173 msgctxt "@label" msgid "Add printer by IP" msgstr "Printer toevoegen op IP" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184 msgctxt "@label" msgid "Add cloud printer" msgstr "Een cloudprinter toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221 msgctxt "@label" msgid "Troubleshooting" msgstr "Probleemoplossing" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24 msgctxt "@label" msgid "Help us to improve Ultimaker Cura" msgstr "Help ons Ultimaker Cura te verbeteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57 msgctxt "@text" msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:" msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren, waaronder:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71 msgctxt "@text" msgid "Machine types" msgstr "Machinetypen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77 msgctxt "@text" msgid "Material usage" msgstr "Materiaalgebruik" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83 msgctxt "@text" msgid "Number of slices" msgstr "Aantal slices" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89 msgctxt "@text" msgid "Print settings" msgstr "Instellingen voor printen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102 msgctxt "@text" msgid "Data collected by Ultimaker Cura will not contain any personal information." msgstr "De gegevens die Ultimaker Cura verzamelt, bevatten geen persoonlijke informatie." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103 msgctxt "@text" msgid "More information" msgstr "Meer informatie" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59 msgctxt "@label" msgid "Object list" msgstr "Lijst met objecten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109 msgctxt "@label" msgid "Is printed as support." msgstr "Is geprint als support." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112 msgctxt "@label" msgid "Other models overlapping with this model are modified." msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115 msgctxt "@label" msgid "Infill overlapping with this model is modified." msgstr "De vulling die met dit model overlapt, is aangepast." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118 msgctxt "@label" msgid "Overlaps with this model are not supported." msgstr "Overlappingen worden in dit model niet ondersteund." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125 msgctxt "@label %1 is the number of settings it overrides." msgid "Overrides %1 setting." msgid_plural "Overrides %1 settings." msgstr[0] "Overschrijft %1 instelling." msgstr[1] "Overschrijft %1 instellingen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 msgctxt "@label" msgid "Connected printers" msgstr "Verbonden printers" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24 msgctxt "@label" msgid "Preset printers" msgstr "Vooraf ingestelde printers" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47 msgctxt "@status" msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet." msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51 msgctxt "@status" msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection." msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer." msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60 msgctxt "@status" msgid "The cloud connection is currently unavailable. Please check your internet connection." msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236 msgctxt "@button" msgid "Add printer" msgstr "Printer toevoegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253 msgctxt "@button" msgid "Manage printers" msgstr "Printers beheren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17 msgctxt "@placeholder" msgid "Search" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93 msgctxt "@text Print job name" msgid "Untitled" msgstr "Zonder titel" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115 msgctxt "@label:MonitorStatus" msgid "Not connected to a printer" msgstr "Niet met een printer verbonden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119 msgctxt "@label:MonitorStatus" msgid "Printer does not accept commands" msgstr "Printer accepteert geen opdrachten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129 msgctxt "@label:MonitorStatus" msgid "In maintenance. Please check the printer" msgstr "In onderhoud. Controleer de printer" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140 msgctxt "@label:MonitorStatus" msgid "Lost connection with the printer" msgstr "Verbinding met de printer is verbroken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142 msgctxt "@label:MonitorStatus" msgid "Printing..." msgstr "Printen..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145 msgctxt "@label:MonitorStatus" msgid "Paused" msgstr "Gepauzeerd" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148 msgctxt "@label:MonitorStatus" msgid "Preparing..." msgstr "Voorbereiden..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150 msgctxt "@label:MonitorStatus" msgid "Please remove the print" msgstr "Verwijder de print" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318 msgctxt "@label" msgid "Abort Print" msgstr "Printen Afbreken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327 msgctxt "@label" msgid "Are you sure you want to abort the print?" msgstr "Weet u zeker dat u het printen wilt afbreken?" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115 msgctxt "@label" msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." msgstr "" "Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n" "\n" "Klik om deze instellingen zichtbaar te maken." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47 msgctxt "@label:textbox" msgid "Search settings" msgstr "Instellingen zoeken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428 msgctxt "@action:menu" msgid "Copy value to all extruders" msgstr "Waarde naar alle extruders kopiëren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437 msgctxt "@action:menu" msgid "Copy all changed values to all extruders" msgstr "Alle gewijzigde waarden naar alle extruders kopiëren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473 msgctxt "@action:menu" msgid "Hide this setting" msgstr "Deze instelling verbergen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486 msgctxt "@action:menu" msgid "Don't show this setting" msgstr "Deze instelling verbergen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490 msgctxt "@action:menu" msgid "Keep this setting visible" msgstr "Deze instelling zichtbaar houden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509 #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467 msgctxt "@action:menu" msgid "Configure setting visibility..." msgstr "Zichtbaarheid Instelling Configureren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78 msgctxt "@label" msgid "This setting is not used because all the settings that it influences are overridden." msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83 msgctxt "@label Header for list of settings." msgid "Affects" msgstr "Beïnvloedt" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88 msgctxt "@label Header for list of settings." msgid "Affected By" msgstr "Beïnvloed door" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189 msgctxt "@label" msgid "This setting is resolved from conflicting extruder-specific values:" msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229 msgctxt "@label" msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." msgstr "" "Deze instelling heeft een andere waarde dan in het profiel.\n" "\n" "Klik om de waarde van het profiel te herstellen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329 msgctxt "@label" msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." msgstr "" "Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n" "\n" "Klik om de berekende waarde te herstellen." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104 msgctxt "@label" msgid "Hex" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156 msgctxt "@label" msgid "Active print" msgstr "Actieve print" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164 msgctxt "@label" msgid "Job Name" msgstr "Taaknaam" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172 msgctxt "@label" msgid "Printing Time" msgstr "Printtijd" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180 msgctxt "@label" msgid "Estimated time left" msgstr "Geschatte resterende tijd" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81 msgctxt "@action:inmenu" msgid "Show Online Troubleshooting" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88 msgctxt "@action:inmenu" msgid "Toggle Full Screen" msgstr "Volledig Scherm In-/Uitschakelen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96 msgctxt "@action:inmenu" msgid "Exit Full Screen" msgstr "Volledig scherm sluiten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103 msgctxt "@action:inmenu menubar:edit" msgid "&Undo" msgstr "Ongedaan &Maken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113 msgctxt "@action:inmenu menubar:edit" msgid "&Redo" msgstr "&Opnieuw" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131 msgctxt "@action:inmenu menubar:file" msgid "&Quit" msgstr "&Afsluiten" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139 msgctxt "@action:inmenu menubar:view" msgid "3D View" msgstr "3D-weergave" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146 msgctxt "@action:inmenu menubar:view" msgid "Front View" msgstr "Weergave voorzijde" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153 msgctxt "@action:inmenu menubar:view" msgid "Top View" msgstr "Weergave bovenzijde" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160 msgctxt "@action:inmenu menubar:view" msgid "Bottom View" msgstr "Aanzicht onderzijde" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167 msgctxt "@action:inmenu menubar:view" msgid "Left Side View" msgstr "Weergave linkerzijde" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174 msgctxt "@action:inmenu menubar:view" msgid "Right Side View" msgstr "Weergave rechterzijde" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188 msgctxt "@action:inmenu" msgid "Configure Cura..." msgstr "Cura Configureren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195 msgctxt "@action:inmenu menubar:printer" msgid "&Add Printer..." msgstr "&Printer Toevoegen..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201 msgctxt "@action:inmenu menubar:printer" msgid "Manage Pr&inters..." msgstr "Pr&inters Beheren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208 msgctxt "@action:inmenu" msgid "Manage Materials..." msgstr "Materialen Beheren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216 msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate." msgid "Add more materials from Marketplace" msgstr "" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223 msgctxt "@action:inmenu menubar:profile" msgid "&Update profile with current settings/overrides" msgstr "Profiel bijwerken met h&uidige instellingen/overschrijvingen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231 msgctxt "@action:inmenu menubar:profile" msgid "&Discard current changes" msgstr "Hui&dige wijzigingen verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." msgstr "Profiel maken op basis van huidige instellingen/overs&chrijvingen..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249 msgctxt "@action:inmenu menubar:profile" msgid "Manage Profiles..." msgstr "Profielen Beheren..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257 msgctxt "@action:inmenu menubar:help" msgid "Show Online &Documentation" msgstr "Online &Documentatie Weergeven" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265 msgctxt "@action:inmenu menubar:help" msgid "Report a &Bug" msgstr "Een &Bug Rapporteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273 msgctxt "@action:inmenu menubar:help" msgid "What's New" msgstr "Nieuwe functies" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287 msgctxt "@action:inmenu menubar:help" msgid "About..." msgstr "Over..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294 msgctxt "@action:inmenu menubar:edit" msgid "Delete Selected" msgstr "Verwijder geselecteerde items" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304 msgctxt "@action:inmenu menubar:edit" msgid "Center Selected" msgstr "Centreer geselecteerde items" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313 msgctxt "@action:inmenu menubar:edit" msgid "Multiply Selected" msgstr "Verveelvoudig geselecteerde items" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322 msgctxt "@action:inmenu" msgid "Delete Model" msgstr "Model Verwijderen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330 msgctxt "@action:inmenu" msgid "Ce&nter Model on Platform" msgstr "Model op Platform Ce&ntreren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336 msgctxt "@action:inmenu menubar:edit" msgid "&Group Models" msgstr "Modellen &Groeperen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356 msgctxt "@action:inmenu menubar:edit" msgid "Ungroup Models" msgstr "Groeperen van Modellen Opheffen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366 msgctxt "@action:inmenu menubar:edit" msgid "&Merge Models" msgstr "Modellen Samen&voegen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376 msgctxt "@action:inmenu" msgid "&Multiply Model..." msgstr "&Model verveelvoudigen..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383 msgctxt "@action:inmenu menubar:edit" msgid "Select All Models" msgstr "Alle Modellen Selecteren" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393 msgctxt "@action:inmenu menubar:edit" msgid "Clear Build Plate" msgstr "Platform Leegmaken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403 msgctxt "@action:inmenu menubar:file" msgid "Reload All Models" msgstr "Alle Modellen Opnieuw Laden" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" msgstr "Alle modellen schikken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" msgstr "Selectie schikken" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Positions" msgstr "Alle Modelposities Herstellen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434 msgctxt "@action:inmenu menubar:edit" msgid "Reset All Model Transformations" msgstr "Alle Modeltransformaties Herstellen" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443 msgctxt "@action:inmenu menubar:file" msgid "&Open File(s)..." msgstr "Bestand(en) &openen..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453 msgctxt "@action:inmenu menubar:file" msgid "&New Project..." msgstr "&Nieuw project..." #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460 msgctxt "@action:inmenu menubar:help" msgid "Show Configuration Folder" msgstr "Open Configuratiemap" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25 msgctxt "@info:tooltip" msgid "3D View" msgstr "3D-weergave" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38 msgctxt "@info:tooltip" msgid "Front View" msgstr "Weergave voorzijde" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51 msgctxt "@info:tooltip" msgid "Top View" msgstr "Weergave bovenzijde" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64 msgctxt "@info:tooltip" msgid "Left View" msgstr "Linkeraanzicht" #: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77 msgctxt "@info:tooltip" msgid "Right View" msgstr "Rechteraanzicht" #: PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." msgstr "Deze optie biedt een voorbereidingsstadium in Cura." #: PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" msgstr "Stadium voorbereiden" #: CuraProfileWriter/plugin.json msgctxt "description" msgid "Provides support for exporting Cura profiles." msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen." #: CuraProfileWriter/plugin.json msgctxt "name" msgid "Cura Profile Writer" msgstr "Cura-profielschrijver" #: TrimeshReader/plugin.json msgctxt "description" msgid "Provides support for reading model files." msgstr "Biedt ondersteuning voor het lezen van modelbestanden." #: TrimeshReader/plugin.json msgctxt "name" msgid "Trimesh Reader" msgstr "Trimesh-lezer" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." msgstr "Controleert op firmware-updates." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" msgstr "Firmware-updatecontrole" #: SentryLogger/plugin.json msgctxt "description" msgid "Logs certain events so that they can be used by the crash reporter" msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt" #: SentryLogger/plugin.json msgctxt "name" msgid "Sentry Logger" msgstr "Sentrylogger" #: MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." msgstr "Deze optie biedt een controlestadium in Cura." #: MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" msgstr "Controlestadium" #: RemovableDriveOutputDevice/plugin.json msgctxt "description" msgid "Provides removable drive hotplugging and writing support." msgstr "Biedt hotplug- en schrijfondersteuning voor verwisselbare stations." #: RemovableDriveOutputDevice/plugin.json msgctxt "name" msgid "Removable Drive Output Device Plugin" msgstr "Plug-in voor Verwijderbaar Uitvoerapparaat" #: AMFReader/plugin.json msgctxt "description" msgid "Provides support for reading AMF files." msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden." #: AMFReader/plugin.json msgctxt "name" msgid "AMF Reader" msgstr "AMF-lezer" #: UFPReader/plugin.json msgctxt "description" msgid "Provides support for reading Ultimaker Format Packages." msgstr "Deze optie biedt ondersteuning voor het lezen van Ultimaker Format Packages." #: UFPReader/plugin.json msgctxt "name" msgid "UFP Reader" msgstr "UFP-lezer" #: DigitalLibrary/plugin.json msgctxt "description" msgid "Connects to the Digital Library, allowing Cura to open files from and save files to the Digital Library." msgstr "Maakt verbinding met de digitale bibliotheek, zodat Cura bestanden kan openen vanuit, en bestanden kan opslaan in, de digitale bibliotheek." #: DigitalLibrary/plugin.json msgctxt "name" msgid "Ultimaker Digital Library" msgstr "Ultimaker Digital Library" #: PerObjectSettingsTool/plugin.json msgctxt "description" msgid "Provides the Per Model Settings." msgstr "Biedt de Instellingen per Model." #: PerObjectSettingsTool/plugin.json msgctxt "name" msgid "Per Model Settings Tool" msgstr "Gereedschap voor Instellingen per Model" #: FirmwareUpdater/plugin.json msgctxt "description" msgid "Provides a machine actions for updating firmware." msgstr "Biedt machineacties voor het bijwerken van de firmware." #: FirmwareUpdater/plugin.json msgctxt "name" msgid "Firmware Updater" msgstr "Firmware-updater" #: UM3NetworkPrinting/plugin.json msgctxt "description" msgid "Manages network connections to Ultimaker networked printers." msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker-netwerkprinters." #: UM3NetworkPrinting/plugin.json msgctxt "name" msgid "Ultimaker Network Connection" msgstr "Ultimaker-netwerkverbinding" #: ModelChecker/plugin.json msgctxt "description" msgid "Checks models and print configuration for possible printing issues and give suggestions." msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties." #: ModelChecker/plugin.json msgctxt "name" msgid "Model Checker" msgstr "Modelcontrole" #: SimulationView/plugin.json msgctxt "description" msgid "Provides the preview of sliced layerdata." msgstr "" #: SimulationView/plugin.json msgctxt "name" msgid "Simulation View" msgstr "Simulatieweergave" #: GCodeWriter/plugin.json msgctxt "description" msgid "Writes g-code to a file." msgstr "Met deze optie schrijft u G-code naar een bestand." #: GCodeWriter/plugin.json msgctxt "name" msgid "G-code Writer" msgstr "G-code-schrijver" #: 3MFWriter/plugin.json msgctxt "description" msgid "Provides support for writing 3MF files." msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden." #: 3MFWriter/plugin.json msgctxt "name" msgid "3MF Writer" msgstr "3MF-schrijver" #: GCodeGzReader/plugin.json msgctxt "description" msgid "Reads g-code from a compressed archive." msgstr "Hiermee leest u G-code uit een gecomprimeerd archief." #: GCodeGzReader/plugin.json msgctxt "name" msgid "Compressed G-code Reader" msgstr "Lezer voor gecomprimeerde G-code" #: XmlMaterialProfile/plugin.json msgctxt "description" msgid "Provides capabilities to read and write XML-based material profiles." msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven." #: XmlMaterialProfile/plugin.json msgctxt "name" msgid "Material Profiles" msgstr "Materiaalprofielen" #: CuraEngineBackend/plugin.json msgctxt "description" msgid "Provides the link to the CuraEngine slicing backend." msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine." #: CuraEngineBackend/plugin.json msgctxt "name" msgid "CuraEngine Backend" msgstr "CuraEngine-back-end" #: X3DReader/plugin.json msgctxt "description" msgid "Provides support for reading X3D files." msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden." #: X3DReader/plugin.json msgctxt "name" msgid "X3D Reader" msgstr "X3D-lezer" #: ImageReader/plugin.json msgctxt "description" msgid "Enables ability to generate printable geometry from 2D image files." msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk." #: ImageReader/plugin.json msgctxt "name" msgid "Image Reader" msgstr "Afbeeldinglezer" #: 3MFReader/plugin.json msgctxt "description" msgid "Provides support for reading 3MF files." msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden." #: 3MFReader/plugin.json msgctxt "name" msgid "3MF Reader" msgstr "3MF-lezer" #: UFPWriter/plugin.json msgctxt "description" msgid "Provides support for writing Ultimaker Format Packages." msgstr "Deze optie biedt ondersteuning voor het schrijven van Ultimaker Format Packages." #: UFPWriter/plugin.json msgctxt "name" msgid "UFP Writer" msgstr "UFP-schrijver" #: LegacyProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from legacy Cura versions." msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies." #: LegacyProfileReader/plugin.json msgctxt "name" msgid "Legacy Cura Profile Reader" msgstr "Lezer voor Profielen van oudere Cura-versies" #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.3 to Cura 4.4." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4." #: VersionUpgrade/VersionUpgrade43to44/plugin.json msgctxt "name" msgid "Version Upgrade 4.3 to 4.4" msgstr "Versie-upgrade van 4.3 naar 4.4" #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2." #: VersionUpgrade/VersionUpgrade21to22/plugin.json msgctxt "name" msgid "Version Upgrade 2.1 to 2.2" msgstr "Versie-upgrade van 2.1 naar 2.2" #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.1 to Cura 4.2." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2." #: VersionUpgrade/VersionUpgrade41to42/plugin.json msgctxt "name" msgid "Version Upgrade 4.1 to 4.2" msgstr "Versie-upgrade van 4.1 naar 4.2" #: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.13 to Cura 5.0." msgstr "" #: VersionUpgrade/VersionUpgrade413to50/plugin.json msgctxt "name" msgid "Version Upgrade 4.13 to 5.0" msgstr "" #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.5 to Cura 4.6." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6." #: VersionUpgrade/VersionUpgrade45to46/plugin.json msgctxt "name" msgid "Version Upgrade 4.5 to 4.6" msgstr "Versie-upgrade van 4.5 naar 4.6" #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.3 to Cura 3.4." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4." #: VersionUpgrade/VersionUpgrade33to34/plugin.json msgctxt "name" msgid "Version Upgrade 3.3 to 3.4" msgstr "Versie-upgrade van 3.3 naar 3.4" #: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.8 to Cura 4.9." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.9." #: VersionUpgrade/VersionUpgrade48to49/plugin.json msgctxt "name" msgid "Version Upgrade 4.8 to 4.9" msgstr "Versie-upgrade van 4.8 naar 4.9" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" msgstr "Versie-upgrade van 2.7 naar 3.0" #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.4 to Cura 4.5." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5." #: VersionUpgrade/VersionUpgrade44to45/plugin.json msgctxt "name" msgid "Version Upgrade 4.4 to 4.5" msgstr "Versie-upgrade van 4.4 naar 4.5" #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.0 to Cura 3.1." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1." #: VersionUpgrade/VersionUpgrade30to31/plugin.json msgctxt "name" msgid "Version Upgrade 3.0 to 3.1" msgstr "Versie-upgrade van 3.0 naar 3.1" #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.0 naar Cura 4.6.2." #: VersionUpgrade/VersionUpgrade460to462/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.0 to 4.6.2" msgstr "Versie-upgrade van 4.6.0 naar 4.6.2" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.6 to Cura 2.7." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7." #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "name" msgid "Version Upgrade 2.6 to 2.7" msgstr "Versie-upgrade van 2.6 naar 2.7" #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.2 to Cura 4.3." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3." #: VersionUpgrade/VersionUpgrade42to43/plugin.json msgctxt "name" msgid "Version Upgrade 4.2 to 4.3" msgstr "Versie-upgrade van 4.2 naar 4.3" #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.0 to Cura 4.1." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1." #: VersionUpgrade/VersionUpgrade40to41/plugin.json msgctxt "name" msgid "Version Upgrade 4.0 to 4.1" msgstr "Versie-upgrade van 4.0 naar 4.1" #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7." #: VersionUpgrade/VersionUpgrade462to47/plugin.json msgctxt "name" msgid "Version Upgrade 4.6.2 to 4.7" msgstr "Versie-upgrade van 4.6.2 naar 4.7" #: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.9 to Cura 4.10." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.9 naar Cura 4.10." #: VersionUpgrade/VersionUpgrade49to410/plugin.json msgctxt "name" msgid "Version Upgrade 4.9 to 4.10" msgstr "Versie-upgrade 4.9 naar 4.10" #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4." #: VersionUpgrade/VersionUpgrade22to24/plugin.json msgctxt "name" msgid "Version Upgrade 2.2 to 2.4" msgstr "Versie-upgrade van 2.2 naar 2.4" #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.2 to Cura 3.3." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3." #: VersionUpgrade/VersionUpgrade32to33/plugin.json msgctxt "name" msgid "Version Upgrade 3.2 to 3.3" msgstr "Versie-upgrade van 3.2 naar 3.3" #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6." #: VersionUpgrade/VersionUpgrade25to26/plugin.json msgctxt "name" msgid "Version Upgrade 2.5 to 2.6" msgstr "Versie-upgrade van 2.5 naar 2.6" #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.5 to Cura 4.0." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0." #: VersionUpgrade/VersionUpgrade35to40/plugin.json msgctxt "name" msgid "Version Upgrade 3.5 to 4.0" msgstr "Versie-upgrade van 3.5 naar 4.0" #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 3.4 to Cura 3.5." msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5." #: VersionUpgrade/VersionUpgrade34to35/plugin.json msgctxt "name" msgid "Version Upgrade 3.4 to 3.5" msgstr "Versie-upgrade van 3.4 naar 3.5" #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.7 to Cura 4.8." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8." #: VersionUpgrade/VersionUpgrade47to48/plugin.json msgctxt "name" msgid "Version Upgrade 4.7 to 4.8" msgstr "Versie-upgrade van 4.7 naar 4.8" #: VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 4.11 to Cura 4.12." msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.11 naar Cura 4.12." #: VersionUpgrade/VersionUpgrade411to412/plugin.json msgctxt "name" msgid "Version Upgrade 4.11 to 4.12" msgstr "Versie-upgrade van 4.11 naar 4.12" #: CuraDrive/plugin.json msgctxt "description" msgid "Backup and restore your configuration." msgstr "Een back-up maken van uw configuratie en deze herstellen." #: CuraDrive/plugin.json msgctxt "name" msgid "Cura Backups" msgstr "Cura-back-ups" #: CuraProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing Cura profiles." msgstr "Biedt ondersteuning bij het importeren van Cura-profielen." #: CuraProfileReader/plugin.json msgctxt "name" msgid "Cura Profile Reader" msgstr "Cura-profiellezer" #: SliceInfoPlugin/plugin.json msgctxt "description" msgid "Submits anonymous slice info. Can be disabled through preferences." msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld." #: SliceInfoPlugin/plugin.json msgctxt "name" msgid "Slice info" msgstr "Slice-informatie" #: GCodeProfileReader/plugin.json msgctxt "description" msgid "Provides support for importing profiles from g-code files." msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden." #: GCodeProfileReader/plugin.json msgctxt "name" msgid "G-code Profile Reader" msgstr "G-code-profiellezer" #: GCodeGzWriter/plugin.json msgctxt "description" msgid "Writes g-code to a compressed archive." msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief." #: GCodeGzWriter/plugin.json msgctxt "name" msgid "Compressed G-code Writer" msgstr "Schrijver voor gecomprimeerde G-code" #: PostProcessingPlugin/plugin.json msgctxt "description" msgid "Extension that allows for user created scripts for post processing" msgstr "Uitbreiding waarmee door de gebruiker gemaakte scripts voor nabewerking kunnen worden gebruikt" #: PostProcessingPlugin/plugin.json msgctxt "name" msgid "Post Processing" msgstr "Nabewerking" #: SupportEraser/plugin.json msgctxt "description" msgid "Creates an eraser mesh to block the printing of support in certain places" msgstr "Hiermee maakt u een wisraster om het printen van een supportstructuur op bepaalde plekken te blokkeren" #: SupportEraser/plugin.json msgctxt "name" msgid "Support Eraser" msgstr "Supportwisser" #: PreviewStage/plugin.json msgctxt "description" msgid "Provides a preview stage in Cura." msgstr "Deze optie biedt een voorbeeldstadium in Cura." #: PreviewStage/plugin.json msgctxt "name" msgid "Preview Stage" msgstr "Voorbeeldstadium" #: XRayView/plugin.json msgctxt "description" msgid "Provides the X-Ray view." msgstr "Biedt de röntgenweergave." #: XRayView/plugin.json msgctxt "name" msgid "X-Ray View" msgstr "Röntgenweergave" #: UltimakerMachineActions/plugin.json msgctxt "description" msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)." msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)" #: UltimakerMachineActions/plugin.json msgctxt "name" msgid "Ultimaker machine actions" msgstr "Acties Ultimaker-machines" #: Marketplace/plugin.json msgctxt "description" msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website." msgstr "" #: Marketplace/plugin.json msgctxt "name" msgid "Marketplace" msgstr "" #: SolidView/plugin.json msgctxt "description" msgid "Provides a normal solid mesh view." msgstr "Biedt een normale, solide rasterweergave." #: SolidView/plugin.json msgctxt "name" msgid "Solid View" msgstr "Solide weergave" #: GCodeReader/plugin.json msgctxt "description" msgid "Allows loading and displaying G-code files." msgstr "Hiermee kunt u G-code-bestanden laden en weergeven." #: GCodeReader/plugin.json msgctxt "name" msgid "G-code Reader" msgstr "G-code-lezer" #: MachineSettingsAction/plugin.json msgctxt "description" msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)." msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen." #: MachineSettingsAction/plugin.json msgctxt "name" msgid "Machine Settings Action" msgstr "Actie machine-instellingen" #: USBPrinting/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de plug-in kan tevens de firmware worden bijgewerkt." #: USBPrinting/plugin.json msgctxt "name" msgid "USB printing" msgstr "USB-printen" #~ msgctxt "@action:button" #~ msgid "Sync materials with printers" #~ msgstr "Synchroniseer materialen" #~ msgctxt "@info:generic" #~ msgid "You need to quit and restart {} before changes have effect." #~ msgstr "U moet {} afsluiten en herstarten voordat de wijzigingen van kracht worden." #~ msgctxt "@info:generic" #~ msgid "Syncing..." #~ msgstr "Synchroniseren ..." #~ msgctxt "@info:title" #~ msgid "Changes detected from your Ultimaker account" #~ msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account" #~ msgctxt "@info:generic" #~ msgid "Do you want to sync material and software packages with your account?" #~ msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?" #~ msgctxt "@action:button" #~ msgid "Sync" #~ msgstr "Synchroniseren" #~ msgctxt "@button" #~ msgid "Decline and remove from account" #~ msgstr "Weigeren en verwijderen uit account" #~ msgctxt "@info:generic" #~ msgid "{} plugins failed to download" #~ msgstr "{} plug-ins zijn niet gedownload" #~ msgctxt "@title:window" #~ msgid "Plugin License Agreement" #~ msgstr "Licentieovereenkomst plug-in" #~ msgctxt "@title:window" #~ msgid "Convert Image..." #~ msgstr "Afbeelding Converteren..." #~ msgctxt "@info:tooltip" #~ msgid "The width in millimeters on the build plate." #~ msgstr "De breedte op het platform in millimeters." #~ msgctxt "@title" #~ msgid "Marketplace" #~ msgstr "Marktplaats" #~ msgctxt "@info" #~ msgid "You will need to restart Cura before changes in packages have effect." #~ msgstr "U moet Cura opnieuw starten voordat wijzigingen in packages van kracht worden." #~ msgctxt "@action:button" #~ msgid "Install" #~ msgstr "Installeren" #~ msgctxt "@action:button" #~ msgid "Installed" #~ msgstr "Geïnstalleerd" #~ msgctxt "@label" #~ msgid "Premium" #~ msgstr "Premium" #~ msgctxt "@info:tooltip" #~ msgid "Go to Web Marketplace" #~ msgstr "Ga naar Marketplace op internet" #~ msgctxt "@label" #~ msgid "Search materials" #~ msgstr "Materialen zoeken" #~ msgctxt "@label" #~ msgid "Compatibility" #~ msgstr "Compatibiliteit" #~ msgctxt "@label:table_header" #~ msgid "Machine" #~ msgstr "Machine" #~ msgctxt "@label:table_header" #~ msgid "Build Plate" #~ msgstr "Platform" #~ msgctxt "@label:table_header" #~ msgid "Support" #~ msgstr "Supportstructuur" #~ msgctxt "@label:table_header" #~ msgid "Quality" #~ msgstr "Kwaliteit" #~ msgctxt "@action:label" #~ msgid "Technical Data Sheet" #~ msgstr "Technisch informatieblad" #~ msgctxt "@action:label" #~ msgid "Safety Data Sheet" #~ msgstr "Veiligheidsinformatieblad" #~ msgctxt "@action:label" #~ msgid "Printing Guidelines" #~ msgstr "Richtlijnen voor printen" #~ msgctxt "@action:label" #~ msgid "Website" #~ msgstr "Website" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Log in is required to install or update" #~ msgstr "Aanmelden is vereist voor installeren of bijwerken" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Buy material spools" #~ msgstr "Materiaalspoelen kopen" #~ msgctxt "@action:button" #~ msgid "Update" #~ msgstr "Bijwerken" #~ msgctxt "@action:button" #~ msgid "Updating" #~ msgstr "Bijwerken" #~ msgctxt "@action:button" #~ msgid "Updated" #~ msgstr "Bijgewerkt" #~ msgctxt "@action:button" #~ msgid "Back" #~ msgstr "Terug" #~ msgctxt "@title:tab" #~ msgid "Plugins" #~ msgstr "Plug-ins" #~ msgctxt "@title:tab" #~ msgid "Installed" #~ msgstr "Geïnstalleerd" #~ msgctxt "@label" #~ msgid "Will install upon restarting" #~ msgstr "Wordt geïnstalleerd na opnieuw starten" #~ msgctxt "@label:The string between and is the highlighted link" #~ msgid "Log in is required to update" #~ msgstr "Aanmelden is vereist voor het bijwerken" #~ msgctxt "@action:button" #~ msgid "Downgrade" #~ msgstr "Downgraden" #~ msgctxt "@action:button" #~ msgid "Uninstall" #~ msgstr "De-installeren" #~ msgctxt "@label" #~ msgid "Community Contributions" #~ msgstr "Community-bijdragen" #~ msgctxt "@label" #~ msgid "Community Plugins" #~ msgstr "Community-plug-ins" #~ msgctxt "@label" #~ msgid "Generic Materials" #~ msgstr "Standaard materialen" #~ msgctxt "@info" #~ msgid "Fetching packages..." #~ msgstr "Packages ophalen..." #~ msgctxt "@label" #~ msgid "Website" #~ msgstr "Website" #~ msgctxt "@label" #~ msgid "Email" #~ msgstr "E-mail" #~ msgctxt "@description" #~ msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise" #~ msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor Ultimaker Cura Enterprise" #~ msgctxt "@label" #~ msgid "Version" #~ msgstr "Versie" #~ msgctxt "@label" #~ msgid "Last updated" #~ msgstr "Laatst bijgewerkt" #~ msgctxt "@label" #~ msgid "Downloads" #~ msgstr "Downloads" #~ msgctxt "@title:tab" #~ msgid "Installed plugins" #~ msgstr "Geïnstalleerde plug-ins" #~ msgctxt "@info" #~ msgid "No plugin has been installed." #~ msgstr "Er zijn geen plug-ins geïnstalleerd." #~ msgctxt "@title:tab" #~ msgid "Installed materials" #~ msgstr "Geïnstalleerde materialen" #~ msgctxt "@info" #~ msgid "No material has been installed." #~ msgstr "Er zijn materialen geïnstalleerd." #~ msgctxt "@title:tab" #~ msgid "Bundled plugins" #~ msgstr "Gebundelde plug-ins" #~ msgctxt "@title:tab" #~ msgid "Bundled materials" #~ msgstr "Gebundelde materialen" #~ msgctxt "@info" #~ msgid "Could not connect to the Cura Package database. Please check your connection." #~ msgstr "Kan geen verbinding maken met de Cura Package-database. Controleer uw verbinding." #~ msgctxt "@label" #~ msgid "You need to accept the license to install the package" #~ msgstr "U moet de licentie accepteren om de package te installeren" #~ msgctxt "@title" #~ msgid "Changes from your account" #~ msgstr "Wijzigingen van uw account" #~ msgctxt "@button" #~ msgid "Dismiss" #~ msgstr "Verwijderen" #~ msgctxt "@label" #~ msgid "The following packages will be added:" #~ msgstr "De volgende packages worden toegevoegd:" #~ msgctxt "@label" #~ msgid "The following packages can not be installed because of an incompatible Cura version:" #~ msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:" #~ msgctxt "@title:window" #~ msgid "Confirm uninstall" #~ msgstr "De-installeren bevestigen" #~ msgctxt "@text:window" #~ msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults." #~ msgstr "U verwijdert materialen en/of profielen die nog in gebruik zijn. Wanneer u het verwijderen bevestigt, worden de volgende materialen/profielen teruggezet naar hun standaardinstellingen." #~ msgctxt "@text:window" #~ msgid "Materials" #~ msgstr "Materialen" #~ msgctxt "@text:window" #~ msgid "Profiles" #~ msgstr "Profielen" #~ msgctxt "@action:button" #~ msgid "Confirm" #~ msgstr "Bevestigen" #~ msgctxt "@info:tooltip" #~ msgid "Some things could be problematic in this print. Click to see tips for adjustment." #~ msgstr "In deze print kunnen problemen ontstaan. Klik om tips voor aanpassingen te bekijken." #~ msgctxt "@label" #~ msgid "Support library for handling planar objects" #~ msgstr "Ondersteuningsbibliotheek voor het verwerken van tweedimensionale objecten" #~ msgctxt "@text:window, %1 is a profile name" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to Keep these changed settings after switching profiles?\n" #~ "Alternatively, you can discard the changes to load the defaults from '%1'." #~ msgstr "" #~ "U hebt enkele profielinstellingen aangepast.\n" #~ "Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n" #~ "U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden." #~ msgctxt "@action:inmenu menubar:view" #~ msgid "&Build plate" #~ msgstr "&Platform" #~ msgctxt "@label" #~ msgid "Create" #~ msgstr "Maken" #~ msgctxt "@label" #~ msgid "Duplicate" #~ msgstr "Dupliceren" #~ msgctxt "@label %1 is printer name" #~ msgid "Printer: %1" #~ msgstr "Printer: %1" #~ msgctxt "@action:button" #~ msgid "Update profile with current settings/overrides" #~ msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen" #~ msgctxt "@label" #~ msgid "Theme:" #~ msgstr "Thema:" #~ msgctxt "@label" #~ msgid "You will need to restart the application for these changes to have effect." #~ msgstr "U moet de toepassing opnieuw starten voordat deze wijzigingen van kracht worden." #~ msgctxt "@action:button" #~ msgid "More information" #~ msgstr "Meer informatie" #~ msgctxt "@action:button" #~ msgid "Create" #~ msgstr "Maken" #~ msgctxt "@action:button Sending materials to printers" #~ msgid "Sync with Printers" #~ msgstr "Synchroniseren met printers" #~ msgctxt "@action:label" #~ msgid "Printer" #~ msgstr "Printer" #~ msgctxt "@title:column" #~ msgid "Unit" #~ msgstr "Eenheid" #~ msgctxt "@action:inmenu" #~ msgid "Show Online Troubleshooting Guide" #~ msgstr "Online gids voor probleemoplossing weergegeven" #~ msgctxt "@action:inmenu" #~ msgid "Add more materials from Marketplace" #~ msgstr "Meer materialen toevoegen van Marketplace" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Arrange All Models To All Build Plates" #~ msgstr "Alle modellen schikken op alle platformen" #~ msgctxt "@action:menu" #~ msgid "&Marketplace" #~ msgstr "&Marktplaats" #~ msgctxt "description" #~ msgid "Find, manage and install new Cura packages." #~ msgstr "Nieuwe Cura-packages zoeken, beheren en installeren." #~ msgctxt "name" #~ msgid "Toolbox" #~ msgstr "Werkset" #~ msgctxt "description" #~ msgid "Provides the Simulation view." #~ msgstr "Hiermee geeft u de simulatieweergave weer." #~ msgctxt "@info:status" #~ msgid "Send and monitor print jobs from anywhere using your Ultimaker account." #~ msgstr "Verzend en controleer overal printtaken met uw Ultimaker-account." #~ msgctxt "@info:status Ultimaker Cloud should not be translated." #~ msgid "Connect to Ultimaker Digital Factory" #~ msgstr "Verbinden met Ultimaker Digital Factory" #~ msgctxt "@info" #~ msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura." #~ msgstr "Vanuit Ultimaker Cura kunt u de webcamfeeds voor cloudprinters niet bekijken." #~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" #~ msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}." #~ msgstr "Er zijn mogelijk nieuwe functies of bugfixes beschikbaar voor uw {machine_name}. Als u nog niet over de nieuwste versie beschikt, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}." #~ msgctxt "@info:title The %s gets replaced with the printer name." #~ msgid "New %s firmware available" #~ msgstr "Nieuwe firmware voor %s beschikbaar" #~ msgctxt "@info:status" #~ msgid "Global stack is missing." #~ msgstr "Algemene stapel ontbreekt." #~ msgctxt "@info:status" #~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces." #~ msgstr "Uw model is niet veelvoudig. De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan." #~ msgctxt "@info:title" #~ msgid "Model errors" #~ msgstr "Modelfouten" #~ msgctxt "@label:listbox" #~ msgid "Layer thickness" #~ msgstr "Laagdikte" #~ msgctxt "@label" #~ msgid "Your key to connected 3D printing" #~ msgstr "Uw sleutel tot verbonden 3D-printen" #~ msgctxt "@text" #~ msgid "" #~ "- Customize your experience with more print profiles and plugins\n" #~ "- Stay flexible by syncing your setup and loading it anywhere\n" #~ "- Increase efficiency with a remote workflow on Ultimaker printers" #~ msgstr "" #~ "- Pas uw ervaring aan met meer printprofielen en plug-ins\n" #~ "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden\n" #~ "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers" #~ msgctxt "@button" #~ msgid "Create account" #~ msgstr "Account maken" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Delete Selected Model" #~ msgid_plural "Delete Selected Models" #~ msgstr[0] "Geselecteerd model verwijderen" #~ msgstr[1] "Geselecteerde modellen verwijderen" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Center Selected Model" #~ msgid_plural "Center Selected Models" #~ msgstr[0] "Geselecteerd model centreren" #~ msgstr[1] "Geselecteerde modellen centreren" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Multiply Selected Model" #~ msgid_plural "Multiply Selected Models" #~ msgstr[0] "Geselecteerd model verveelvoudigen" #~ msgstr[1] "Geselecteerde modellen verveelvoudigen" #~ msgctxt "@button" #~ msgid "Finish" #~ msgstr "Voltooien" #~ msgctxt "@label" #~ msgid "Ultimaker Account" #~ msgstr "Ultimaker-account" #~ msgctxt "@text" #~ msgid "Your key to connected 3D printing" #~ msgstr "Uw sleutel tot verbonden 3D-printen" #~ msgctxt "@text" #~ msgid "- Customize your experience with more print profiles and plugins" #~ msgstr "- Pas uw ervaring aan met meer printprofielen en plug-ins" #~ msgctxt "@text" #~ msgid "- Stay flexible by syncing your setup and loading it anywhere" #~ msgstr "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden" #~ msgctxt "@text" #~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers" #~ msgstr "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers" #~ msgctxt "@text" #~ msgid "" #~ "Please follow these steps to set up\n" #~ "Ultimaker Cura. This will only take a few moments." #~ msgstr "" #~ "Volg deze stappen voor het instellen van\n" #~ "Ultimaker Cura. Dit duurt slechts even." #~ msgctxt "@label" #~ msgid "What's new in Ultimaker Cura" #~ msgstr "Nieuwe functies in Ultimaker Cura" #~ msgctxt "@label ({} is object name)" #~ msgid "Are you sure you wish to remove {}? This cannot be undone!" #~ msgstr "Weet u zeker dat u {} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt." #~ msgctxt "@info:status" #~ msgid "The selected model was too small to load." #~ msgstr "Het geselecteerde model is te klein om te laden." #~ msgctxt "@info:status" #~ msgid "Successfully imported profile {0}" #~ msgstr "Het profiel {0} is geïmporteerd" #~ msgctxt "@info:status" #~ msgid "Could not find a quality type {0} for the current configuration." #~ msgstr "Kan geen kwaliteitstype {0} vinden voor de huidige configuratie." #~ msgctxt "info:status" #~ msgid "Adding printer {} ({}) from your account" #~ msgstr "Printer {} ({}) toevoegen van uw account" #~ msgctxt "info:hidden list items" #~ msgid "
  • ... and {} others
    • " #~ msgstr "
  • ... en {} anderen
    • " #~ msgctxt "info:status" #~ msgid "Printers added from Digital Factory:
      {}
    " #~ msgstr "Printers toegevoegd van Digital Factory:
      {}
    " #~ msgctxt "info:status" #~ msgid "
      {}
    To establish a connection, please visit the Ultimaker Digital Factory." #~ msgstr "
      {}
    Bezoek de Ultimaker Digital Factory om een verbinding tot stand te brengen." #~ msgctxt "@label ({} is printer name)" #~ msgid "{} will be removed until the next account sync.
    To remove {} permanently, visit Ultimaker Digital Factory.

    Are you sure you want to remove {} temporarily?" #~ msgstr "{} wordt verwijderd tot de volgende accountsynchronisatie.
    Ga naar Ultimaker Digital Factory om {} permanent te verwijderen.

    Weet u zeker dat u {} tijdelijk wilt verwijderen?" #~ msgctxt "@label" #~ msgid "" #~ "You are about to remove {} printer(s) from Cura. This action cannot be undone. \n" #~ "Are you sure you want to continue?" #~ msgstr "" #~ "U staat op het punt om {} printer(s) uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt. \n" #~ "Weet u zeker dat u door wilt gaan?" #~ msgctxt "@label" #~ msgid "" #~ "You are about to remove all printers from Cura. This action cannot be undone. \n" #~ "Are you sure you want to continue?" #~ msgstr "" #~ "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt. \n" #~ "Weet u zeker dat u door wilt gaan?" #~ msgctxt "@action:ComboBox option" #~ msgid "Update" #~ msgstr "Bijwerken" #~ msgctxt "@action:ComboBox option" #~ msgid "Create new" #~ msgstr "Nieuw maken" #~ msgctxt "@label" #~ msgid "Shared Heater" #~ msgstr "Gedeelde verwarming" #~ msgctxt "@info" #~ msgid "The webcam is not available because you are monitoring a cloud printer." #~ msgstr "De webcam is niet beschikbaar omdat u een cloudprinter controleert." #~ msgctxt "@button" #~ msgid "Ultimaker Digital Factory" #~ msgstr "Ultimaker Digital Factory" #~ msgctxt "@text:window, %1 is a profile name" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to Keep these changed settings after switching profiles?\n" #~ "Alternatively, you can Discard the changes to load the defaults from '%1'." #~ msgstr "" #~ "U hebt enkele profielinstellingen aangepast.\n" #~ "Wilt u deze gewijzigde instellingen behouden na het wisselen tussen profielen?\n" #~ "U kunt de wijzigingen ook Verwijderen om de standaardinstellingen van '%1' te laden." #~ msgctxt "@label" #~ msgid "Overrides %1 setting." #~ msgid_plural "Overrides %1 settings." #~ msgstr[0] "Overschrijft %1 instelling." #~ msgstr[1] "Overschrijft %1 instellingen." #~ msgctxt "@text" #~ msgid "Please give your printer a name" #~ msgstr "Voer een naam in voor uw printer" #~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" #~ msgid "New features are available for your {machine_name}! It is recommended to update the firmware on your printer." #~ msgstr "Er zijn nieuwe functies beschikbaar voor uw {machine_name}! Het wordt aanbevolen de firmware van uw printer bij te werken." #~ msgctxt "@action:button" #~ msgid "Print via Cloud" #~ msgstr "Printen via Cloud" #~ msgctxt "@properties:tooltip" #~ msgid "Print via Cloud" #~ msgstr "Printen via Cloud" #~ msgctxt "@info:status" #~ msgid "Connected via Cloud" #~ msgstr "Verbonden via Cloud" #~ msgctxt "@info:status Ultimaker Cloud should not be translated." #~ msgid "Connect to Ultimaker Cloud" #~ msgstr "Verbinden met Ultimaker Cloud" #~ msgctxt "@label" #~ msgid "You need to login first before you can rate" #~ msgstr "U moet zich aanmelden voordat u een beoordeling kunt geven" #~ msgctxt "@label" #~ msgid "You need to install the package before you can rate" #~ msgstr "U moet het package installeren voordat u een beoordeling kunt geven" #~ msgctxt "@label" #~ msgid "ratings" #~ msgstr "beoordelingen" #~ msgctxt "@label" #~ msgid "Featured" #~ msgstr "Functies" #~ msgctxt "@label" #~ msgid "Your rating" #~ msgstr "Uw beoordeling" #~ msgctxt "@label" #~ msgid "Author" #~ msgstr "Auteur" #~ msgctxt "@description" #~ msgid "Get plugins and materials verified by Ultimaker" #~ msgstr "Krijg plug-ins en materialen die door Ultimaker zijn geverifieerd" #~ msgctxt "@label The argument is a username." #~ msgid "Hi %1" #~ msgstr "Hallo %1" #~ msgctxt "@button" #~ msgid "Ultimaker account" #~ msgstr "Ultimaker-account" #~ msgctxt "@button" #~ msgid "Sign out" #~ msgstr "Afmelden" #~ msgctxt "@label" #~ msgid "Support library for analysis of complex networks" #~ msgstr "Ondersteuningsbibliotheek voor de analyse van complexe netwerken" #~ msgctxt "@Label" #~ msgid "Python HTTP library" #~ msgstr "Python HTTP-bibliotheek" #~ msgctxt "@text:window" #~ msgid "" #~ "You have customized some profile settings.\n" #~ "Would you like to keep or discard those settings?" #~ msgstr "" #~ "U hebt enkele profielinstellingen aangepast.\n" #~ "Wilt u deze instellingen behouden of verwijderen?" #~ msgctxt "@title:column" #~ msgid "Default" #~ msgstr "Standaard" #~ msgctxt "@title:column" #~ msgid "Customized" #~ msgstr "Aangepast" #~ msgctxt "@action:button" #~ msgid "Discard" #~ msgstr "Verwijderen" #~ msgctxt "@action:button" #~ msgid "Keep" #~ msgstr "Behouden" #~ msgctxt "@action:button" #~ msgid "Create New Profile" #~ msgstr "Nieuw profiel maken" #~ msgctxt "@title:menu menubar:file" #~ msgid "&Save..." #~ msgstr "&Opslaan..." #~ msgctxt "@text" #~ msgid "Place enter your printer's IP address." #~ msgstr "Voer het IP-adres van uw printer in." #~ msgctxt "@button" #~ msgid "Create an account" #~ msgstr "Een account maken" #~ msgctxt "@info:generic" #~ msgid "" #~ "\n" #~ "Do you want to sync material and software packages with your account?" #~ msgstr "" #~ "\n" #~ "Wilt u materiaal- en softwarepackages synchroniseren met uw account?" #~ msgctxt "@info:generic" #~ msgid "" #~ "\n" #~ "Syncing..." #~ msgstr "" #~ "\n" #~ "Synchroniseren ..." #~ msgctxt "@info:status" #~ msgid "Nothing to slice because none of the models fit the build volume or are assigned to a disabled extruder. Please scale or rotate models to fit, or enable an extruder." #~ msgstr "Er kan niets worden geslicet omdat geen van de modellen in het bouwvolume past of omdat de modellen toegewezen zijn aan een uitgeschakelde extruder. Schaal of roteer de modellen totdat deze passen of schakel een extruder in." #~ msgctxt "@info:backup_status" #~ msgid "There was an error listing your backups." #~ msgstr "Er is een fout opgetreden tijdens het vermelden van uw back-ups." #~ msgctxt "@title:groupbox" #~ msgid "User description (Note: Developers may not speak your language, please use English if possible)" #~ msgstr "Gebruikersbeschrijving (opmerking: ontwikkelaars spreken uw taal mogelijk niet; gebruik indien mogelijk Engels)" #~ msgctxt "@title:window" #~ msgid "Closing Cura" #~ msgstr "Cura afsluiten" #~ msgctxt "@label" #~ msgid "Are you sure you want to exit Cura?" #~ msgstr "Weet u zeker dat u Cura wilt verlaten?" #~ msgctxt "@label" #~ msgid "Language:" #~ msgstr "Taal:" #~ msgctxt "@label" #~ msgid "Ultimaker Cloud" #~ msgstr "Ultimaker Cloud" #~ msgctxt "@text" #~ msgid "The next generation 3D printing workflow" #~ msgstr "De 3D-printworkflow van de volgende generatie" #~ msgctxt "@text" #~ msgid "- Send print jobs to Ultimaker printers outside your local network" #~ msgstr "- Printtaken verzenden naar Ultimaker-printers buiten uw lokale netwerk" #~ msgctxt "@text" #~ msgid "- Store your Ultimaker Cura settings in the cloud for use anywhere" #~ msgstr "- Ultimaker Cura-instellingen opslaan in de cloud zodat u ze overal kunt gebruiken" #~ msgctxt "@text" #~ msgid "- Get exclusive access to print profiles from leading brands" #~ msgstr "- Exclusieve toegang tot printprofielen van toonaangevende merken" #~ msgctxt "@label" #~ msgid "The value is resolved from per-extruder values " #~ msgstr "De waarde wordt afgeleid van de waarden per extruder " #~ msgctxt "@label" #~ msgid "The next generation 3D printing workflow" #~ msgstr "De 3D-printworkflow van de volgende generatie" #~ msgctxt "@text" #~ msgid "" #~ "- Send print jobs to Ultimaker printers outside your local network\n" #~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n" #~ "- Get exclusive access to print profiles from leading brands" #~ msgstr "" #~ "- Printtaken verzenden naar Ultimaker-printers buiten uw lokale netwerk\n" #~ "- Ultimaker Cura-instellingen opslaan in de cloud zodat u ze overal kunt gebruiken\n" #~ "- Exclusieve toegang verkrijgen tot printprofielen van toonaangevende merken" #~ msgctxt "@title:window" #~ msgid "About " #~ msgstr "Over " #~ msgctxt "@info:button" #~ msgid "Quit Cura" #~ msgstr "Cura sluiten" #~ msgctxt "@action:checkbox" #~ msgid "Infill only" #~ msgstr "Alleen vulling" #~ msgctxt "@info:tooltip" #~ msgid "Change active post-processing scripts" #~ msgstr "Actieve scripts voor nabewerking wijzigen" #~ msgctxt "@label:listbox" #~ msgid "Feedrate" #~ msgstr "Doorvoersnelheid" #~ msgctxt "name" #~ msgid "Machine Settings action" #~ msgstr "Actie machine-instellingen" #~ msgctxt "@info:title" #~ msgid "New cloud printers found" #~ msgstr "Nieuwe cloudprinters gevonden" #~ msgctxt "@info:message" #~ msgid "New printers have been found connected to your account, you can find them in your list of discovered printers." #~ msgstr "Er zijn nieuwe printers gedetecteerd die zijn verbonden met uw account. U kunt ze vinden in uw lijst met gedetecteerde printers." #~ msgctxt "@info:status" #~ msgid "Cura does not accurately display layers when Wire Printing is enabled" #~ msgstr "Als draadprinten is ingeschakeld, geeft Cura lagen niet nauwkeurig weer" #~ msgctxt "@label" #~ msgid "Pre-sliced file {0}" #~ msgstr "Vooraf geslicet bestand {0}" #~ msgctxt "@label" #~ msgid "" #~ "This plugin contains a license.\n" #~ "You need to accept this license to install this plugin.\n" #~ "Do you agree with the terms below?" #~ msgstr "" #~ "Deze plug-in bevat een licentie.\n" #~ "U moet akkoord gaan met deze licentie om deze plug-in te mogen installeren.\n" #~ "Gaat u akkoord met de onderstaande voorwaarden?" #~ msgctxt "@action:button" #~ msgid "Accept" #~ msgstr "Ja, ik ga akkoord" #~ msgctxt "@action:button" #~ msgid "Decline" #~ msgstr "Nee, ik ga niet akkoord" #~ msgctxt "@action:inmenu" #~ msgid "Show All Settings" #~ msgstr "Alle instellingen weergeven" #~ msgctxt "@title:window" #~ msgid "Ultimaker Cura" #~ msgstr "Ultimaker Cura" #~ msgctxt "@title:window" #~ msgid "About Cura" #~ msgstr "Over Cura" #~ msgctxt "@item:inmenu" #~ msgid "Flatten active settings" #~ msgstr "Actieve instellingen platmaken" #~ msgctxt "@info:status" #~ msgid "Profile has been flattened & activated." #~ msgstr "Profiel is platgemaakt en geactiveerd." #~ msgctxt "X3g Writer Plugin Description" #~ msgid "Writes X3g to files" #~ msgstr "Schrijft X3g naar bestanden" #~ msgctxt "X3g Writer File Description" #~ msgid "X3g File" #~ msgstr "X3g-bestand" #~ msgctxt "X3G Writer File Description" #~ msgid "X3G File" #~ msgstr "X3G-bestand" #~ msgctxt "@item:inlistbox" #~ msgid "Open Compressed Triangle Mesh" #~ msgstr "Gecomprimeerde driehoeksnet openen" #~ msgctxt "@item:inmenu" #~ msgid "Profile Assistant" #~ msgstr "Profielassistent" #~ msgctxt "@item:inlistbox" #~ msgid "Profile Assistant" #~ msgstr "Profielassistent" #~ msgctxt "@action:button" #~ msgid "Retry" #~ msgstr "Opnieuw proberen" #~ msgctxt "@label:table_header" #~ msgid "Print Core" #~ msgstr "Print core" #~ msgctxt "@label" #~ msgid "Don't support overlap with other models" #~ msgstr "Supportstructuur niet laten overlappen met andere modellen" #~ msgctxt "@label" #~ msgid "Modify settings for overlap with other models" #~ msgstr "Instellingen aanpassen voor overlapping met andere modellen" #~ msgctxt "@label" #~ msgid "Modify settings for infill of other models" #~ msgstr "Instellingen aanpassen voor vulling van andere modellen" #~ msgctxt "@action:ComboBox option" #~ msgid "Update existing" #~ msgstr "Bestaand(e) bijwerken" #~ msgctxt "@label" #~ msgid "Not supported" #~ msgstr "Niet ondersteund" #~ msgctxt "@action:button" #~ msgid "Previous" #~ msgstr "Vorige" #~ msgctxt "@label" #~ msgid "Tip" #~ msgstr "Tip" #~ msgctxt "@label" #~ msgid "Print experiment" #~ msgstr "Print experiment" #~ msgctxt "@label" #~ msgid "Checklist" #~ msgstr "Checklist" #~ msgctxt "@label" #~ msgid "Please select any upgrades made to this Ultimaker 2." #~ msgstr "Selecteer eventuele upgrades die op deze Ultimaker 2 zijn uitgevoerd." #~ msgctxt "@label" #~ msgid "Olsson Block" #~ msgstr "Olsson-blok" #~ msgctxt "@window:text" #~ msgid "Camera rendering: " #~ msgstr "Cameraweergave: " #~ msgctxt "@info:tooltip" #~ msgid "Use multi build plate functionality" #~ msgstr "Functionaliteit voor meerdere platformen gebruiken" #~ msgctxt "@option:check" #~ msgid "Use multi build plate functionality (restart required)" #~ msgstr "Functionaliteit voor meerdere platformen gebruiken (opnieuw opstarten vereist)" #~ msgctxt "@label" #~ msgid "Default profiles" #~ msgstr "Standaardprofielen" #~ msgctxt "@label:textbox" #~ msgid "search settings" #~ msgstr "instellingen zoeken" #~ msgctxt "@label" #~ msgid "Layer Height" #~ msgstr "Laaghoogte" #~ msgctxt "@tooltip" #~ msgid "This quality profile is not available for your current material and nozzle configuration. Please change these to enable this quality profile." #~ msgstr "Dit kwaliteitsprofiel is niet beschikbaar voor uw huidige materiaal- en nozzleconfiguratie. Breng hierin wijzigingen aan om gebruik van dit kwaliteitsprofiel mogelijk te maken." #~ msgctxt "@tooltip" #~ msgid "A custom profile is currently active. To enable the quality slider, choose a default quality profile in Custom tab" #~ msgstr "Er is momenteel een aangepast profiel actief. Als u de kwaliteitsschuifregelaar wilt gebruiken, kiest u een standaard kwaliteitsprofiel op het tabblad Aangepast" #~ msgctxt "@title:menu" #~ msgid "&Build plate" #~ msgstr "&Platform" #~ msgctxt "@title:settings" #~ msgid "&Profile" #~ msgstr "&Profiel" #~ msgctxt "@action:label" #~ msgid "Build plate" #~ msgstr "Platform" #~ msgctxt "description" #~ msgid "Dump the contents of all settings to a HTML file." #~ msgstr "Dump de inhoud van alle instellingen naar een HTML-bestand." #~ msgctxt "name" #~ msgid "God Mode" #~ msgstr "Godmodus" #~ msgctxt "description" #~ msgid "Create a flattened quality changes profile." #~ msgstr "Hiermee maakt u een afgevlakte versie van het gewijzigde profiel." #~ msgctxt "name" #~ msgid "Profile Flattener" #~ msgstr "Profielvlakker" #~ msgctxt "description" #~ msgid "Allows material manufacturers to create new material and quality profiles using a drop-in UI." #~ msgstr "Maakt het fabrikanten mogelijk nieuwe materiaal- en kwaliteitsprofielen aan te maken met behulp van een drop-in-gebruikersinterface." #~ msgctxt "name" #~ msgid "Print Profile Assistant" #~ msgstr "Profielassistent afdrukken" #~ msgctxt "@info:status" #~ msgid "Connected over the network." #~ msgstr "Via het netwerk verbonden." #~ msgctxt "@info:status" #~ msgid "Connected over the network. Please approve the access request on the printer." #~ msgstr "Via het netwerk verbonden. Keur de aanvraag goed op de printer." #~ msgctxt "@info:status" #~ msgid "Connected over the network. No access to control the printer." #~ msgstr "Via het netwerk verbonden. Kan de printer niet beheren." #~ msgctxt "@info:status" #~ msgid "Access to the printer requested. Please approve the request on the printer" #~ msgstr "Er is een toegangsaanvraag voor de printer verstuurd. Keur de aanvraag goed op de printer" #~ msgctxt "@info:title" #~ msgid "Authentication status" #~ msgstr "Verificatiestatus" #~ msgctxt "@info:title" #~ msgid "Authentication Status" #~ msgstr "Verificatiestatus" #~ msgctxt "@info:tooltip" #~ msgid "Re-send the access request" #~ msgstr "De toegangsaanvraag opnieuw verzenden" #~ msgctxt "@info:status" #~ msgid "Access to the printer accepted" #~ msgstr "Toegang tot de printer is geaccepteerd" #~ msgctxt "@info:status" #~ msgid "No access to print with this printer. Unable to send print job." #~ msgstr "Kan geen toegang verkrijgen om met deze printer te printen. Kan de printtaak niet verzenden." #~ msgctxt "@action:button" #~ msgid "Request Access" #~ msgstr "Toegang aanvragen" #~ msgctxt "@info:tooltip" #~ msgid "Send access request to the printer" #~ msgstr "Toegangsaanvraag naar de printer verzenden" #~ msgctxt "@label" #~ msgid "Unable to start a new print job." #~ msgstr "Er kan geen nieuwe taak worden gestart." #~ msgctxt "@label" #~ msgid "There is an issue with the configuration of your Ultimaker, which makes it impossible to start the print. Please resolve this issues before continuing." #~ msgstr "Er is een probleem met de configuratie van de Ultimaker waardoor het niet mogelijk is het printen te starten. Los het probleem op voordat u verder gaat." #~ msgctxt "@window:title" #~ msgid "Mismatched configuration" #~ msgstr "De configuratie komt niet overeen" #~ msgctxt "@label" #~ msgid "Are you sure you wish to print with the selected configuration?" #~ msgstr "Weet u zeker dat u met de geselecteerde configuratie wilt printen?" #~ msgctxt "@label" #~ msgid "There is a mismatch between the configuration or calibration of the printer and Cura. For the best result, always slice for the PrintCores and materials that are inserted in your printer." #~ msgstr "De configuratie of kalibratie van de printer komt niet overeen met de configuratie van Cura. Slice voor het beste resultaat altijd voor de PrintCores en materialen die in de printer zijn ingevoerd." #~ msgctxt "@info:status" #~ msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." #~ msgstr "Het verzenden van nieuwe taken is (tijdelijk) geblokkeerd. Nog bezig met het verzenden van de vorige printtaak." #~ msgctxt "@info:status" #~ msgid "Sending data to printer" #~ msgstr "De gegevens worden naar de printer verzonden" #~ msgctxt "@info:title" #~ msgid "Sending Data" #~ msgstr "Gegevens Verzenden" #~ msgctxt "@info:status" #~ msgid "No Printcore loaded in slot {slot_number}" #~ msgstr "Er is geen PrintCore geladen in de sleuf {slot_number}" #~ msgctxt "@info:status" #~ msgid "No material loaded in slot {slot_number}" #~ msgstr "Er is geen materiaal geladen in de sleuf {slot_number}" #~ msgctxt "@label" #~ msgid "Different PrintCore (Cura: {cura_printcore_name}, Printer: {remote_printcore_name}) selected for extruder {extruder_id}" #~ msgstr "Er is een afwijkende PrintCore (Cura: {cura_printcore_name}, printer: {remote_printcore_name}) geselecteerd voor de extruder {extruder_id}" #~ msgctxt "@label" #~ msgid "Different material (Cura: {0}, Printer: {1}) selected for extruder {2}" #~ msgstr "Afwijkend materiaal (Cura: {0}, Printer: {1}) geselecteerd voor de extruder {2}" #~ msgctxt "@window:title" #~ msgid "Sync with your printer" #~ msgstr "Synchroniseren met de printer" #~ msgctxt "@label" #~ msgid "Would you like to use your current printer configuration in Cura?" #~ msgstr "Wilt u uw huidige printerconfiguratie gebruiken in Cura?" #~ msgctxt "@label" #~ msgid "The PrintCores and/or materials on your printer differ from those within your current project. For the best result, always slice for the PrintCores and materials that are inserted in your printer." #~ msgstr "De PrintCores en/of materialen in de printer wijken af van de PrintCores en/of materialen in uw huidige project. Slice voor het beste resultaat altijd voor de PrintCores en materialen die in de printer zijn ingevoerd." #~ msgctxt "@action:button" #~ msgid "View in Monitor" #~ msgstr "In monitor weergeven" #~ msgctxt "@info:status" #~ msgid "Printer '{printer_name}' has finished printing '{job_name}'." #~ msgstr "Printer '{printer_name}' is klaar met het printen van '{job_name}'." #~ msgctxt "@info:status" #~ msgid "The print job '{job_name}' was finished." #~ msgstr "De printtaak '{job_name}' is voltooid." #~ msgctxt "@info:status" #~ msgid "Print finished" #~ msgstr "Print klaar" #~ msgctxt "@label:material" #~ msgid "Empty" #~ msgstr "Leeg" #~ msgctxt "@label:material" #~ msgid "Unknown" #~ msgstr "Onbekend" #~ msgctxt "@info:title" #~ msgid "Cloud error" #~ msgstr "Cloud-fout" #~ msgctxt "@info:status" #~ msgid "Could not export print job." #~ msgstr "Kan de printtaak niet exporteren." #~ msgctxt "@info:description" #~ msgid "There was an error connecting to the cloud." #~ msgstr "Er is een fout opgetreden tijdens het verbinden met de cloud." #~ msgctxt "@info:status" #~ msgid "Uploading via Ultimaker Cloud" #~ msgstr "Uploaden via Ultimaker Cloud" #~ msgctxt "@info:status Ultimaker Cloud is a brand name and shouldn't be translated." #~ msgid "Connect to Ultimaker Cloud" #~ msgstr "Verbinden met Ultimaker Cloud" #~ msgctxt "@action" #~ msgid "Don't ask me again for this printer." #~ msgstr "Niet opnieuw vragen voor deze printer." #~ msgctxt "@info:status" #~ msgid "You can now send and monitor print jobs from anywhere using your Ultimaker account." #~ msgstr "U kunt nu overal vandaan printtaken verzenden en controleren met uw Ultimaker-account." #~ msgctxt "@info:status" #~ msgid "Connected!" #~ msgstr "Verbonden!" #~ msgctxt "@action" #~ msgid "Review your connection" #~ msgstr "Uw verbinding controleren" #~ msgctxt "@info:status Don't translate the XML tags !" #~ msgid "The machine defined in profile {0} ({1}) doesn't match with your current machine ({2}), could not import it." #~ msgstr "De machine die is vastgelegd in het profiel {0} ({1}), komt niet overeen met uw huidige machine ({2}). Kan het profiel niet importeren." #~ msgctxt "@info:status Don't translate the XML tags or !" #~ msgid "Failed to import profile from {0}:" #~ msgstr "Kan het profiel niet importeren uit {0}:" #~ msgctxt "@window:title" #~ msgid "Existing Connection" #~ msgstr "Bestaande verbinding" #~ msgctxt "@message:text" #~ msgid "This printer/group is already added to Cura. Please select another printer/group." #~ msgstr "Deze printer/groep is al aan Cura toegevoegd. Selecteer een andere printer/groep." #~ msgctxt "@label" #~ msgid "Enter the IP address or hostname of your printer on the network." #~ msgstr "Voer het IP-adres of de hostnaam van de printer in het netwerk in." #~ msgctxt "@info:tooltip" #~ msgid "Connect to a printer" #~ msgstr "Verbinding maken met een printer" #~ msgctxt "@title" #~ msgid "Cura Settings Guide" #~ msgstr "Cura-instellingengids" #~ msgctxt "@info:tooltip" #~ msgid "Zooming towards the mouse is not supported in the orthogonal perspective." #~ msgstr "Zoomen in de richting van de muis wordt niet ondersteund in het orthogonale perspectief." #~ msgid "Orthogonal" #~ msgstr "Orthografisch" #~ msgctxt "description" #~ msgid "Manages network connections to Ultimaker 3 printers." #~ msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker 3-printers." #~ msgctxt "name" #~ msgid "UM3 Network Connection" #~ msgstr "UM3-netwerkverbinding" #~ msgctxt "description" #~ msgid "Provides extra information and explanations about settings in Cura, with images and animations." #~ msgstr "Biedt extra informatie en uitleg over instellingen in Cura, voorzien van afbeeldingen en animaties." #~ msgctxt "name" #~ msgid "Settings Guide" #~ msgstr "Instellingengids" #~ msgctxt "@item:inmenu" #~ msgid "Cura Settings Guide" #~ msgstr "Cura-instellingengids" #~ msgctxt "@info:generic" #~ msgid "Settings have been changed to match the current availability of extruders: [%s]" #~ msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van de extruders: [%s]" #~ msgctxt "@title:groupbox" #~ msgid "User description" #~ msgstr "Gebruikersbeschrijving" #~ msgctxt "@info" #~ msgid "These options are not available because you are monitoring a cloud printer." #~ msgstr "Deze opties zijn niet beschikbaar omdat u een cloudprinter controleert." #~ msgctxt "@label link to connect manager" #~ msgid "Go to Cura Connect" #~ msgstr "Ga naar Cura Connect" #~ msgctxt "@info" #~ msgid "All jobs are printed." #~ msgstr "Alle taken zijn geprint." #~ msgctxt "@label link to connect manager" #~ msgid "View print history" #~ msgstr "Printgeschiedenis weergeven" #~ msgctxt "@label" #~ msgid "" #~ "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" #~ "\n" #~ "Select your printer from the list below:" #~ msgstr "" #~ "Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om G-code-bestanden naar de printer over te zetten.\n" #~ "\n" #~ "Selecteer uw printer in de onderstaande lijst:" #~ msgctxt "@info" #~ msgid "" #~ "Please make sure your printer has a connection:\n" #~ "- Check if the printer is turned on.\n" #~ "- Check if the printer is connected to the network." #~ msgstr "" #~ "Controleer of de printer verbonden is:\n" #~ "- Controleer of de printer ingeschakeld is.\n" #~ "- Controleer of de printer verbonden is met het netwerk." #~ msgctxt "@option:check" #~ msgid "See only current build plate" #~ msgstr "Alleen huidig platform weergeven" #~ msgctxt "@action:button" #~ msgid "Arrange to all build plates" #~ msgstr "Schikken naar alle platformen" #~ msgctxt "@action:button" #~ msgid "Arrange current build plate" #~ msgstr "Huidig platform schikken" #~ msgctxt "description" #~ msgid "Allows saving the resulting slice as an X3G file, to support printers that read this format (Malyan, Makerbot and other Sailfish-based printers)." #~ msgstr "Hiermee slaat u de resulterende slice op als X3G-bestand, om printers te ondersteunen die deze indeling lezen (Malyan, Makerbot en andere Sailfish-gebaseerde printers)." #~ msgctxt "name" #~ msgid "X3GWriter" #~ msgstr "X3G-schrijver" #~ msgctxt "description" #~ msgid "Reads SVG files as toolpaths, for debugging printer movements." #~ msgstr "Hiermee leest u SVG-bestanden als gereedschapsbanen, voor probleemoplossing in printerverplaatsingen." #~ msgctxt "name" #~ msgid "SVG Toolpath Reader" #~ msgstr "SVG-gereedschapsbaanlezer" #~ msgctxt "@item:inmenu" #~ msgid "Changelog" #~ msgstr "Wijzigingenlogboek" #~ msgctxt "@item:inmenu" #~ msgid "Show Changelog" #~ msgstr "Wijzigingenlogboek Weergeven" #~ msgctxt "@info:status" #~ msgid "Sending data to remote cluster" #~ msgstr "Gegevens naar een extern cluster verzenden" #~ msgctxt "@info:status" #~ msgid "Connect to Ultimaker Cloud" #~ msgstr "Verbinden met Ultimaker Cloud" #~ msgctxt "@info" #~ msgid "Cura collects anonymized usage statistics." #~ msgstr "Cura verzamelt geanonimiseerde gebruiksstatistieken." #~ msgctxt "@info:title" #~ msgid "Collecting Data" #~ msgstr "Gegevens verzamelen" #~ msgctxt "@action:button" #~ msgid "More info" #~ msgstr "Meer informatie" #~ msgctxt "@action:tooltip" #~ msgid "See more information on what data Cura sends." #~ msgstr "Lees meer over welke gegevens Cura verzendt." #~ msgctxt "@action:button" #~ msgid "Allow" #~ msgstr "Toestaan" #~ msgctxt "@action:tooltip" #~ msgid "Allow Cura to send anonymized usage statistics to help prioritize future improvements to Cura. Some of your preferences and settings are sent, the Cura version and a hash of the models you're slicing." #~ msgstr "Cura toestaan geanonimiseerde gebruiksstatistieken te verzenden om toekomstige verbeteringen aan Cura te helpen prioriteren. Onder de verzonden gegevens bevindt zich informatie over uw voorkeuren en instellingen, de Cura-versie en een selectie van de modellen die u slicet." #~ msgctxt "@item:inmenu" #~ msgid "Evaluation" #~ msgstr "Evaluatie" #~ msgctxt "@info:title" #~ msgid "Network enabled printers" #~ msgstr "Netwerkprinters" #~ msgctxt "@info:title" #~ msgid "Local printers" #~ msgstr "Lokale printers" #~ msgctxt "@info:backup_failed" #~ msgid "Tried to restore a Cura backup that does not match your current version." #~ msgstr "Geprobeerd een Cura-back-up te herstellen die niet overeenkomt met uw huidige versie." #~ msgctxt "@title" #~ msgid "Machine Settings" #~ msgstr "Machine-instellingen" #~ msgctxt "@label" #~ msgid "Printer Settings" #~ msgstr "Printerinstellingen" #~ msgctxt "@option:check" #~ msgid "Origin at center" #~ msgstr "Centraal oorsprongpunt" #~ msgctxt "@option:check" #~ msgid "Heated bed" #~ msgstr "Verwarmd bed" #~ msgctxt "@label" #~ msgid "Printhead Settings" #~ msgstr "Instellingen Printkop" #~ msgctxt "@tooltip" #~ msgid "Distance from the left of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"." #~ msgstr "Afstand van de linkerkant van de printkop tot het midden van de nozzle. Wordt tijdens \"een voor een\"-printen gebruikt om botsingen tussen eerder geprinte voorwerpen en de printkop te voorkomen." #~ msgctxt "@tooltip" #~ msgid "Distance from the front of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"." #~ msgstr "Afstand van de voorkant van de printkop tot het midden van de nozzle. Wordt tijdens \"een voor een\"-printen gebruikt om botsingen tussen eerder geprinte voorwerpen en de printkop te voorkomen." #~ msgctxt "@tooltip" #~ msgid "Distance from the right of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"." #~ msgstr "Afstand van de rechterkant van de printkop tot het midden van de nozzle. Wordt tijdens \"een voor een\"-printen gebruikt om botsingen tussen eerder geprinte voorwerpen en de printkop te voorkomen." #~ msgctxt "@tooltip" #~ msgid "Distance from the rear of the printhead to the center of the nozzle. Used to prevent colissions between previous prints and the printhead when printing \"One at a Time\"." #~ msgstr "Afstand van de achterkant van de printkop tot het midden van de nozzle. Wordt tijdens \"een voor een\"-printen gebruikt om botsingen tussen eerder geprinte voorwerpen en de printkop te voorkomen." #~ msgctxt "@label" #~ msgid "Gantry height" #~ msgstr "Hoogte rijbrug" #~ msgctxt "@tooltip" #~ msgid "The height difference between the tip of the nozzle and the gantry system (X and Y axes). Used to prevent collisions between previous prints and the gantry when printing \"One at a Time\"." #~ msgstr "Het hoogteverschil tussen de punt van de nozzle en het rijbrugsysteem (X- en Y-as). Wordt tijdens \"een voor een\"-printen gebruikt om botsingen tussen eerder geprinte voorwerpen en het rijbrugsysteem te voorkomen." #~ msgctxt "@label" #~ msgid "Start G-code" #~ msgstr "Start G-code" #~ msgctxt "@tooltip" #~ msgid "G-code commands to be executed at the very start." #~ msgstr "G-code-opdrachten die aan het begin worden uitgevoerd." #~ msgctxt "@label" #~ msgid "End G-code" #~ msgstr "Eind G-code" #~ msgctxt "@tooltip" #~ msgid "G-code commands to be executed at the very end." #~ msgstr "G-code-opdrachten die aan het eind worden uitgevoerd." #~ msgctxt "@label" #~ msgid "Nozzle Settings" #~ msgstr "Nozzle-instellingen" #~ msgctxt "@tooltip" #~ msgid "The nominal diameter of filament supported by the printer. The exact diameter will be overridden by the material and/or the profile." #~ msgstr "De nominale diameter van het filament dat wordt ondersteund door de printer. De exacte diameter wordt overschreven door het materiaal en/of het profiel." #~ msgctxt "@label" #~ msgid "Extruder Start G-code" #~ msgstr "Start-G-code van Extruder" #~ msgctxt "@label" #~ msgid "Extruder End G-code" #~ msgstr "Eind-G-code van Extruder" #~ msgctxt "@label" #~ msgid "Changelog" #~ msgstr "Wijzigingenlogboek" #~ msgctxt "@title:window" #~ msgid "User Agreement" #~ msgstr "Gebruikersovereenkomst" #~ msgctxt "@alabel" #~ msgid "Enter the IP address or hostname of your printer on the network." #~ msgstr "Voer het IP-adres of de hostnaam van de printer in het netwerk in." #~ msgctxt "@info" #~ msgid "Please select a network connected printer to monitor." #~ msgstr "Selecteer een met een netwerk verbonden printer om te controleren." #~ msgctxt "@info" #~ msgid "Please connect your Ultimaker printer to your local network." #~ msgstr "Verbind uw Ultimaker-printer met uw lokale netwerk." #~ msgctxt "@text:window" #~ msgid "Cura sends anonymous data to Ultimaker in order to improve the print quality and user experience. Below is an example of all the data that is sent." #~ msgstr "Cura verzendt anonieme gegevens naar Ultimaker om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden verzonden." #~ msgctxt "@text:window" #~ msgid "I don't want to send this data" #~ msgstr "Ik wil deze gegevens niet verzenden" #~ msgctxt "@text:window" #~ msgid "Allow sending this data to Ultimaker and help us improve Cura" #~ msgstr "Verzenden van deze gegevens naar Ultimaker toestaan en ons helpen Cura te verbeteren" #~ msgctxt "@label" #~ msgid "No print selected" #~ msgstr "Er is geen print geselecteerd" #~ msgctxt "@info:tooltip" #~ msgid "By default, white pixels represent high points on the mesh and black pixels represent low points on the mesh. Change this option to reverse the behavior such that black pixels represent high points on the mesh and white pixels represent low points on the mesh." #~ msgstr "Standaard staan witte pixels voor hoge en zwarte pixels voor lage punten in het raster. U kunt dit omdraaien, zodat zwarte pixels voor hoge en witte pixels voor lage punten in het raster staan." #~ msgctxt "@title" #~ msgid "Select Printer Upgrades" #~ msgstr "Printerupgrades Selecteren" #~ msgctxt "@label" #~ msgid "Select which extruder to use for support. This will build up supporting structures below the model to prevent the model from sagging or printing in mid air." #~ msgstr "Selecteren welke extruder voor support wordt gebruikt. Deze optie zorgt ervoor dat onder het model ondersteuning wordt geprint, om te voorkomen dat dit doorzakt of dat er midden in de lucht moet worden geprint." #~ msgctxt "@tooltip" #~ msgid "This quality profile is not available for your current material and nozzle configuration. Please change these to enable this quality profile" #~ msgstr "Dit kwaliteitsprofiel is niet beschikbaar voor uw huidige materiaal- en nozzleconfiguratie. Breng hierin wijzigingen aan om gebruik van dit kwaliteitsprofiel mogelijk te maken" #~ msgctxt "@label shown when we load a Gcode file" #~ msgid "Print setup disabled. G code file can not be modified." #~ msgstr "Printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd." #~ msgctxt "@label" #~ msgid "See the material compatibility chart" #~ msgstr "Zie de materiaalcompatibiliteitsgrafiek" #~ msgctxt "@label" #~ msgid "View types" #~ msgstr "Typen weergeven" #~ msgctxt "@label" #~ msgid "Hi " #~ msgstr "Hallo " #~ msgctxt "@text" #~ msgid "" #~ "- Send print jobs to Ultimaker printers outside your local network\n" #~ "- Store your Ultimaker Cura settings in the cloud for use anywhere\n" #~ "- Get exclusive access to material profiles from leading brands" #~ msgstr "" #~ "- Printtaken verzenden naar Ultimaker-printers buiten uw lokale netwerk\n" #~ "- Ultimaker Cura-instellingen opslaan in de cloud zodat u ze overal kunt gebruiken\n" #~ "- Exclusieve toegang verkrijgen tot materiaalprofielen van toonaangevende merken" #~ msgctxt "@label:PrintjobStatus" #~ msgid "Unable to Slice" #~ msgstr "Kan Niet Slicen" #~ msgctxt "@label" #~ msgid "Time specification" #~ msgstr "Tijdspecificatie" #~ msgctxt "@label" #~ msgid "Material specification" #~ msgstr "Materiaalspecificatie" #~ msgctxt "@title:tab" #~ msgid "Add a printer to Cura" #~ msgstr "Een printer aan Cura toevoegen" #~ msgctxt "@title:tab" #~ msgid "" #~ "Select the printer you want to use from the list below.\n" #~ "\n" #~ "If your printer is not in the list, use the \"Custom FFF Printer\" from the \"Custom\" category and adjust the settings to match your printer in the next dialog." #~ msgstr "" #~ "Selecteer de printer die u wilt gebruiken, uit de onderstaande lijst.\n" #~ "\n" #~ "Als uw printer niet in de lijst wordt weergegeven, gebruikt u de 'Custom FFF Printer' (Aangepaste FFF-printer) uit de categorie 'Custom' (Aangepast) en past u in het dialoogvenster dat wordt weergegeven, de instellingen aan zodat deze overeenkomen met uw printer." #~ msgctxt "@label" #~ msgid "Printer Name" #~ msgstr "Printernaam" #~ msgctxt "@action:button" #~ msgid "Add Printer" #~ msgstr "Printer Toevoegen" #~ msgid "Modify G-Code" #~ msgstr "G-code wijzigen" #~ msgctxt "@info:status" #~ msgid "Nothing to slice because none of the models fit the build volume. Please scale or rotate models to fit." #~ msgstr "Er valt niets te slicen omdat geen van de modellen in het bouwvolume past. Schaal of roteer de modellen totdat deze passen." #~ msgctxt "@info:status" #~ msgid "The selected material is incompatible with the selected machine or configuration." #~ msgstr "Het geselecteerde materiaal is niet compatibel met de geselecteerde machine of configuratie." #~ msgctxt "@info:title" #~ msgid "Incompatible Material" #~ msgstr "Niet-compatibel materiaal" #~ msgctxt "@info:status Don't translate the XML tags or !" #~ msgid "Failed to import profile from {0}: {1}" #~ msgstr "Kan het profiel niet importeren uit {0}: {1}" #~ msgctxt "@title" #~ msgid "Toolbox" #~ msgstr "Werkset" #~ msgctxt "@label" #~ msgid "Not available" #~ msgstr "Niet beschikbaar" #~ msgctxt "@label" #~ msgid "Unreachable" #~ msgstr "Niet bereikbaar" #~ msgctxt "@label" #~ msgid "Available" #~ msgstr "Beschikbaar" #~ msgctxt "@label:status" #~ msgid "Preparing" #~ msgstr "Voorbereiden" #~ msgctxt "@label:status" #~ msgid "Pausing" #~ msgstr "Pauzeren" #~ msgctxt "@label:status" #~ msgid "Resuming" #~ msgstr "Hervatten" #~ msgctxt "@label" #~ msgid "Waiting for: Unavailable printer" #~ msgstr "Wachten op: Niet-beschikbare printer" #~ msgctxt "@label" #~ msgid "Waiting for: First available" #~ msgstr "Wachten op: Eerst beschikbare" #~ msgctxt "@label" #~ msgid "Waiting for: " #~ msgstr "Wachten op: " #~ msgctxt "@label" #~ msgid "Configuration change" #~ msgstr "Configuratiewijziging" #~ msgctxt "@label" #~ msgid "The assigned printer, %1, requires the following configuration change(s):" #~ msgstr "Voor de toegewezen printer, %1, is/zijn de volgende configuratiewijziging/configuratiewijzigingen vereist:" #~ msgctxt "@label" #~ msgid "Override" #~ msgstr "Overschrijven" #~ msgctxt "@label" #~ msgid "Starting a print job with an incompatible configuration could damage your 3D printer. Are you sure you want to override the configuration and print %1?" #~ msgstr "Als u een printtaak met een incompatibele configuratie start, kan dit leiden tot schade aan de 3D-printer. Weet u zeker dat u de configuratie en print %1 wilt overschrijven?" #~ msgctxt "@window:title" #~ msgid "Override configuration configuration and start print" #~ msgstr "Configuratie overschrijven en printen starten" #~ msgctxt "@label link to connect manager" #~ msgid "Manage queue" #~ msgstr "Wachtrij beheren" #~ msgctxt "@label" #~ msgid "Printing" #~ msgstr "Printen" #~ msgctxt "@label link to connect manager" #~ msgid "Manage printers" #~ msgstr "Printers beheren" #~ msgctxt "@action:button" #~ msgid "Activate Configuration" #~ msgstr "Configuratie Activeren" #~ msgctxt "@info:tooltip" #~ msgid "Load the configuration of the printer into Cura" #~ msgstr "De configuratie van de printer in Cura laden" #~ msgctxt "@label" #~ msgid "Show Travels" #~ msgstr "Bewegingen weergeven" #~ msgctxt "@label" #~ msgid "Show Helpers" #~ msgstr "Helpers weergeven" #~ msgctxt "@label" #~ msgid "Show Shell" #~ msgstr "Shell weergeven" #~ msgctxt "@label" #~ msgid "Show Infill" #~ msgstr "Vulling weergeven" #~ msgctxt "@text:window" #~ msgid "I don't want to send these data" #~ msgstr "Ik wil deze gegevens niet verzenden" #~ msgctxt "@text:window" #~ msgid "Allow sending these data to Ultimaker and help us improve Cura" #~ msgstr "Verzenden van deze gegevens naar Ultimaker toestaan en ons helpen Cura te verbeteren" #~ msgctxt "@label" #~ msgid "Printer type:" #~ msgstr "Type printer:" #~ msgctxt "@label" #~ msgid "Connection:" #~ msgstr "Verbinding:" #~ msgctxt "@label" #~ msgid "State:" #~ msgstr "Status:" #~ msgctxt "@label:MonitorStatus" #~ msgid "Waiting for a printjob" #~ msgstr "Wachten op een printtaak" #~ msgctxt "@label:MonitorStatus" #~ msgid "Waiting for someone to clear the build plate" #~ msgstr "Wachten totdat iemand het platform leegmaakt" #~ msgctxt "@label:MonitorStatus" #~ msgid "Aborting print..." #~ msgstr "Printen afbreken..." #~ msgctxt "@label" #~ msgid "Protected profiles" #~ msgstr "Beschermde profielen" #~ msgctxt "@label" #~ msgid "Printer Name:" #~ msgstr "Printernaam:" #~ msgctxt "@label" #~ msgid "Profile:" #~ msgstr "Profiel:" #~ msgctxt "@label:textbox" #~ msgid "Search..." #~ msgstr "Zoeken..." #~ msgctxt "@action:inmenu" #~ msgid "Collapse All" #~ msgstr "Alles samenvouwen" #~ msgctxt "@action:inmenu" #~ msgid "Expand All" #~ msgstr "Alles uitvouwen" #~ msgctxt "@label:header configurations" #~ msgid "Available configurations" #~ msgstr "Beschikbare configuraties" #~ msgctxt "@label:extruder label" #~ msgid "Extruder" #~ msgstr "Extruder" #~ msgctxt "@label:extruder label" #~ msgid "Yes" #~ msgstr "Ja" #~ msgctxt "@label:extruder label" #~ msgid "No" #~ msgstr "Nee" #~ msgctxt "@label:listbox" #~ msgid "Print Setup" #~ msgstr "Instelling voor Printen" #~ msgctxt "@label:listbox" #~ msgid "" #~ "Print Setup disabled\n" #~ "G-code files cannot be modified" #~ msgstr "" #~ "Instelling voor printen uitgeschakeld\n" #~ "G-code-bestanden kunnen niet worden aangepast" #~ msgctxt "@label Hours and minutes" #~ msgid "00h 00min" #~ msgstr "00u 00min" #~ msgctxt "@tooltip" #~ msgid "Time specification" #~ msgstr "Tijdspecificatie" #~ msgctxt "@label" #~ msgid "Cost specification" #~ msgstr "Kostenspecificatie" #~ msgctxt "@label" #~ msgid "Total:" #~ msgstr "Totaal:" #~ msgctxt "@tooltip" #~ msgid "Recommended Print Setup

    Print with the recommended settings for the selected printer, material and quality." #~ msgstr "Aanbevolen instellingen voor printen

    Print met de aanbevolen instellingen voor de geselecteerde printer en kwaliteit, en het geselecteerde materiaal." #~ msgctxt "@tooltip" #~ msgid "Custom Print Setup

    Print with finegrained control over every last bit of the slicing process." #~ msgstr "Aangepaste instellingen voor printen

    Print met uiterst precieze controle over elk detail van het slice-proces." #~ msgctxt "@action:inmenu menubar:help" #~ msgid "Show Engine &Log..." #~ msgstr "Engine-&logboek Weergeven..." #~ msgctxt "@action:menu" #~ msgid "Browse packages..." #~ msgstr "Door packages bladeren..." #~ msgctxt "@action:inmenu menubar:view" #~ msgid "Expand/Collapse Sidebar" #~ msgstr "Zijbalk uitbreiden/samenvouwen" #~ msgctxt "@label:PrintjobStatus" #~ msgid "Please load a 3D model" #~ msgstr "Laad een 3D-model" #~ msgctxt "@label:PrintjobStatus" #~ msgid "Ready to slice" #~ msgstr "Gereed om te slicen" #~ msgctxt "@label:PrintjobStatus %1 is target operation" #~ msgid "Ready to %1" #~ msgstr "Gereed voor %1" #~ msgctxt "@label:PrintjobStatus" #~ msgid "Slicing unavailable" #~ msgstr "Slicen is niet beschikbaar" #~ msgctxt "@info:tooltip" #~ msgid "Slice current printjob" #~ msgstr "Huidige printtaak slicen" #~ msgctxt "@info:tooltip" #~ msgid "Cancel slicing process" #~ msgstr "Slicen annuleren" #~ msgctxt "@label:Printjob" #~ msgid "Prepare" #~ msgstr "Voorbereiden" #~ msgctxt "@label:Printjob" #~ msgid "Cancel" #~ msgstr "Annuleren" #~ msgctxt "@info:tooltip" #~ msgid "Select the active output device" #~ msgstr "Actief Uitvoerapparaat Selecteren" #~ msgctxt "@title:menu" #~ msgid "&View" #~ msgstr "Beel&d" #~ msgctxt "@title:menu" #~ msgid "&Settings" #~ msgstr "In&stellingen" #~ msgctxt "@title:menu menubar:toplevel" #~ msgid "&Toolbox" #~ msgstr "Werkse&t" #~ msgctxt "@action:button" #~ msgid "Open File" #~ msgstr "Bestand Openen" #~ msgctxt "@tooltip" #~ msgid "This quality profile is not available for you current material and nozzle configuration. Please change these to enable this quality profile" #~ msgstr "Dit kwaliteitsprofiel is niet beschikbaar voor uw huidige materiaal- en nozzleconfiguratie. Breng hierin wijzigingen aan om gebruik van dit kwaliteitsprofiel mogelijk te maken" #~ msgctxt "@label" #~ msgid "Print Speed" #~ msgstr "Printsnelheid" #~ msgctxt "@label" #~ msgid "Slower" #~ msgstr "Langzamer" #~ msgctxt "@label" #~ msgid "Faster" #~ msgstr "Sneller" #~ msgctxt "@label" #~ msgid "Enable gradual" #~ msgstr "Geleidelijke vulling" #~ msgctxt "@label" #~ msgid "Generate Support" #~ msgstr "Support genereren" #~ msgctxt "@label" #~ msgid "Build Plate Adhesion" #~ msgstr "Hechting aan platform" #~ msgctxt "@label" #~ msgid "Need help improving your prints?
    Read the Ultimaker Troubleshooting Guides" #~ msgstr "Hebt u hulp nodig om betere prints te krijgen?
    Lees de Ultimaker Troubleshooting Guides (Handleiding voor probleemoplossing)" #~ msgctxt "@title:window" #~ msgid "Engine Log" #~ msgstr "Engine-logboek" #~ msgctxt "@label" #~ msgid "Printer type" #~ msgstr "Type printer" #~ msgctxt "@label" #~ msgid "Use glue with this material combination" #~ msgstr "Gebruik lijm bij deze combinatie van materialen" #~ msgctxt "@label" #~ msgid "Check compatibility" #~ msgstr "Compatibiliteit controleren" #~ msgctxt "@tooltip" #~ msgid "Click to check the material compatibility on Ultimaker.com." #~ msgstr "Klik om de materiaalcompatibiliteit te controleren op Ultimaker.com." #~ msgctxt "description" #~ msgid "Shows changes since latest checked version." #~ msgstr "Hiermee geeft u de wijzigingen weer ten opzichte van de laatst gecontroleerde versie." #~ msgctxt "name" #~ msgid "Changelog" #~ msgstr "Wijzigingenlogboek" #~ msgctxt "description" #~ msgid "Create a flattend quality changes profile." #~ msgstr "Hiermee maakt u een afgevlakte versie van het gewijzigde profiel." #~ msgctxt "name" #~ msgid "Profile flatener" #~ msgstr "Profielvlakker" #~ msgctxt "description" #~ msgid "Ask the user once if he/she agrees with our license." #~ msgstr "Vraag de gebruiker één keer of deze akkoord gaat met de licentie." #~ msgctxt "name" #~ msgid "UserAgreement" #~ msgstr "UserAgreement" #~ msgctxt "@warning:status" #~ msgid "Please generate G-code before saving." #~ msgstr "Genereer G-code voordat u het bestand opslaat." #~ msgctxt "@action" #~ msgid "Upgrade Firmware" #~ msgstr "Firmware-upgrade Uitvoeren" #~ msgctxt "@label unknown material" #~ msgid "Unknown" #~ msgstr "Onbekend" #~ msgctxt "@info:status Don't translate the XML tags or !" #~ msgid "No custom profile to import in file {0}" #~ msgstr "Er is geen aangepast profiel om in het bestand {0} te importeren" #~ msgctxt "@info:status Don't translate the XML tags or !" #~ msgid "This profile {0} contains incorrect data, could not import it." #~ msgstr "Dit profiel {0} bevat incorrecte gegevens. Kan het profiel niet importeren." #~ msgctxt "@info:status Don't translate the XML tags or !" #~ msgid "The machine defined in profile {0} ({1}) doesn't match with your current machine ({2}), could not import it." #~ msgstr "De machine die is vastgelegd in het profiel {0} ({1}) komt niet overeen met uw huidige machine ({2}). Kan het profiel niet importeren." #~ msgctxt "@title:window" #~ msgid "Confirm uninstall " #~ msgstr "Bevestig de-installeren " #~ msgctxt "@label Print estimates: m for meters, g for grams, %4 is currency and %3 is print cost" #~ msgid "%1m / ~ %2g / ~ %4 %3" #~ msgstr "%1 m / ~ %2 g / ~ %4 %3" #~ msgctxt "@label Print estimates: m for meters, g for grams" #~ msgid "%1m / ~ %2g" #~ msgstr "%1 m / ~ %2 g" #~ msgctxt "@title" #~ msgid "Upgrade Firmware" #~ msgstr "Firmware-upgrade Uitvoeren" #~ msgctxt "@action:button" #~ msgid "Print with Doodle3D WiFi-Box" #~ msgstr "Printen via Doodle3D WiFi-Box" #~ msgctxt "@properties:tooltip" #~ msgid "Print with Doodle3D WiFi-Box" #~ msgstr "Printen via Doodle3D WiFi-Box" #~ msgctxt "@info:status" #~ msgid "Connecting to Doodle3D Connect" #~ msgstr "Verbinding maken met Doodle3D Connect" #~ msgctxt "@info:status" #~ msgid "Sending data to Doodle3D Connect" #~ msgstr "De gegevens worden naar Doodle3D Connect verzonden" #~ msgctxt "@info:status" #~ msgid "Unable to send data to Doodle3D Connect. Is another job still active?" #~ msgstr "Kan geen gegevens naar Doodle3D Connect verzenden. Is er nog een andere taak actief?" #~ msgctxt "@info:status" #~ msgid "Storing data on Doodle3D Connect" #~ msgstr "Gegevens op Doodle3D Connect opslaan" #~ msgctxt "@info:status" #~ msgid "File sent to Doodle3D Connect" #~ msgstr "Het bestand is naar Doodle3D Connect verzonden" #~ msgctxt "@action:button" #~ msgid "Open Connect..." #~ msgstr "Connect openen..." #~ msgctxt "@info:tooltip" #~ msgid "Open the Doodle3D Connect web interface" #~ msgstr "De Doodle3D Connect-webinterface openen" #~ msgctxt "@item:inlistbox" #~ msgid "Blender file" #~ msgstr "Blender-bestand" #~ msgctxt "@info:status" #~ msgid "" #~ "Could not export using \"{}\" quality!\n" #~ "Felt back to \"{}\"." #~ msgstr "" #~ "Kan niet exporteren met de kwaliteit \"{}\"!\n" #~ "Instelling teruggezet naar \"{}\"." #~ msgctxt "@label" #~ msgid "Contact" #~ msgstr "Contact" #~ msgctxt "@label" #~ msgid "This printer is not set up to host a group of Ultimaker 3 printers." #~ msgstr "Deze printer is niet opgezet om een groep Ultimaker 3 printers te hosten." #~ msgctxt "@label" #~ msgid "This printer is the host for a group of %1 Ultimaker 3 printers." #~ msgstr "Deze printer is de host voor een groep van %1 Ultimaker 3 printers." #~ msgctxt "@label: arg 1 is group name" #~ msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" #~ msgstr "%1 is niet ingesteld voor het hosten van een groep aangesloten Ultimaker 3-printers" #~ msgctxt "@label link to connect manager" #~ msgid "Add/Remove printers" #~ msgstr "Printers toevoegen/verwijderen" #~ msgctxt "@info:tooltip" #~ msgid "Opens the print jobs page with your default web browser." #~ msgstr "Hiermee opent u de pagina met printtaken in uw standaard webbrowser." #~ msgctxt "@action:button" #~ msgid "View print jobs" #~ msgstr "Printtaken weergeven" #~ msgctxt "@label:status" #~ msgid "Preparing to print" #~ msgstr "Printen voorbereiden" #~ msgctxt "@label:status" #~ msgid "Available" #~ msgstr "Beschikbaar" #~ msgctxt "@label:status" #~ msgid "Lost connection with the printer" #~ msgstr "Verbinding met de printer is verbroken" #~ msgctxt "@label:status" #~ msgid "Unknown" #~ msgstr "Onbekend" #~ msgctxt "@label:status" #~ msgid "Disabled" #~ msgstr "Uitgeschakeld" #~ msgctxt "@label:status" #~ msgid "Reserved" #~ msgstr "Gereserveerd" #~ msgctxt "@label" #~ msgid "Preparing to print" #~ msgstr "Voorbereiden om te printen" #~ msgctxt "@label:status" #~ msgid "Print aborted" #~ msgstr "Print afgebroken" #~ msgctxt "@label" #~ msgid "Not accepting print jobs" #~ msgstr "Accepteert geen printtaken" #~ msgctxt "@label" #~ msgid "Finishes at: " #~ msgstr "Klaar om: " #~ msgctxt "@label" #~ msgid "Clear build plate" #~ msgstr "Platform leegmaken" #~ msgctxt "@label" #~ msgid "Waiting for configuration change" #~ msgstr "Wacht op wijziging van configuratie" #~ msgctxt "@title" #~ msgid "Print jobs" #~ msgstr "Printtaken" #~ msgctxt "@label:title" #~ msgid "Printers" #~ msgstr "Printers" #~ msgctxt "@action:button" #~ msgid "View printers" #~ msgstr "Printers weergeven" #~ msgctxt "@label:" #~ msgid "Pause" #~ msgstr "Pauzeren" #~ msgctxt "@label:" #~ msgid "Resume" #~ msgstr "Hervatten" #~ msgctxt "@label:" #~ msgid "Abort Print" #~ msgstr "Printen Afbreken" #~ msgctxt "@option:openProject" #~ msgid "Always ask" #~ msgstr "Altijd vragen" #~ msgctxt "@label" #~ msgid "Override Profile" #~ msgstr "Profiel overschrijven" #~ msgctxt "@info:tooltip" #~ msgid "Should newly loaded models be arranged on the build plate? Used in conjunction with multi build plate (EXPERIMENTAL)" #~ msgstr "Moeten nieuw geladen modellen op het platform worden geschikt? Gebruikt in combinatie met meerdere platformen (EXPERIMENTEEL)" #~ msgctxt "@option:check" #~ msgid "Do not arrange objects on load" #~ msgstr "Objecten niet schikken na laden" #~ msgctxt "@action:inmenu menubar:file" #~ msgid "&Save Selection to File" #~ msgstr "&Selectie Opslaan naar Bestand" #~ msgctxt "@title:menu menubar:file" #~ msgid "Save &As..." #~ msgstr "Opslaan &als..." #~ msgctxt "@title:menu menubar:file" #~ msgid "Save &Project..." #~ msgstr "&Project opslaan..." # Added after the string freeze. #~ msgctxt "@label" #~ msgid "Use adhesion sheet or glue with this material combination" #~ msgstr "Gebruik een hechtingsvel of lijm met deze materiaalcombinatie" #~ msgctxt "description" #~ msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." #~ msgstr "Accepteert G-code en verzendt deze code via wifi naar een Doodle3D WiFi-Box." #~ msgctxt "name" #~ msgid "Doodle3D WiFi-Box" #~ msgstr "Doodle3D WiFi-Box" #~ msgctxt "description" #~ msgid "Provides an edit window for direct script editing." #~ msgstr "Deze optie biedt een bewerkingsvenster voor rechtstreeks bewerken van scripts." #~ msgctxt "name" #~ msgid "Live scripting tool" #~ msgstr "Gereedschap voor live uitvoeren van scripts" #~ msgctxt "description" #~ msgid "Helps to open Blender files directly in Cura." #~ msgstr "Hiermee kunnen Blender-bestanden rechtstreeks in Cura worden geopend." #~ msgctxt "name" #~ msgid "Blender Integration (experimental)" #~ msgstr "Blender-integratie (experimenteel)" #~ msgctxt "@info:title" #~ msgid "Model Checker Warning" #~ msgstr "Waarschuwing modelcontrole" #~ msgctxt "@info:status" #~ msgid "" #~ "Some models may not be printed optimally due to object size and chosen material for models: {model_names}.\n" #~ "Tips that may be useful to improve the print quality:\n" #~ "1) Use rounded corners.\n" #~ "2) Turn the fan off (only if there are no tiny details on the model).\n" #~ "3) Use a different material." #~ msgstr "" #~ "Sommige modellen worden mogelijk niet optimaal geprint vanwege de grootte van het object en de gekozen materialen voor modellen: {model_names}.\n" #~ "Mogelijk nuttige tips om de printkwaliteit te verbeteren:\n" #~ "1) Gebruik afgeronde hoeken.\n" #~ "2) Schakel de ventilator uit (alleen als het model zeer kleine details bevat).\n" #~ "3) Gebruik een ander materiaal." #~ msgctxt "@info:status" #~ msgid "SolidWorks reported errors while opening your file. We recommend to solve these issues inside SolidWorks itself." #~ msgstr "SolidWorks heeft fouten gerapporteerd tijdens het openen van uw bestand. Het wordt aanbevolen deze problemen binnen SolidWorks zelf op te lossen." #~ msgctxt "@info:status" #~ msgid "" #~ "Found no models inside your drawing. Could you please check its content again and make sure one part or assembly is inside?\n" #~ "\n" #~ "Thanks!" #~ msgstr "" #~ "In uw tekening zijn geen modellen gevonden. Controleer de inhoud nogmaals en zorg ervoor dat één onderdeel of assemblage zich in de tekening bevindt.\n" #~ "\n" #~ "Hartelijk dank." #~ msgctxt "@info:status" #~ msgid "" #~ "Found more than one part or assembly inside your drawing. We currently only support drawings with exactly one part or assembly inside.\n" #~ "\n" #~ "Sorry!" #~ msgstr "" #~ "In uw tekening is meer dan één onderdeel of assemblage gevonden. Momenteel worden alleen tekeningen met precies één onderdeel of assemblage ondersteund.\n" #~ "\n" #~ "Sorry." #~ msgctxt "@item:inlistbox" #~ msgid "SolidWorks part file" #~ msgstr "Onderdelenbestand SolidWorks" #~ msgctxt "@item:inlistbox" #~ msgid "SolidWorks assembly file" #~ msgstr "Montagebestand SolidWorks" #~ msgctxt "@item:inlistbox" #~ msgid "SolidWorks drawing file" #~ msgstr "Tekenbestand SolidWorks" #~ msgctxt "@info:status" #~ msgid "" #~ "Dear customer,\n" #~ "We could not find a valid installation of SolidWorks on your system. That means that either SolidWorks is not installed or you don't own an valid license. Please make sure that running SolidWorks itself works without issues and/or contact your ICT.\n" #~ "\n" #~ "With kind regards\n" #~ " - Thomas Karl Pietrowski" #~ msgstr "" #~ "Beste klant,\n" #~ "Op uw systeem is geen geldige installatie van SolidWorks aangetroffen. Dit betekent dat SolidWorks niet is geïnstalleerd of dat u niet over een geldige licentie beschikt. Controleer of SolidWorks zelf zonder problemen kan worden uitgevoerd en/of neem contact op met uw IT-afdeling.\n" #~ "\n" #~ "Met vriendelijke groeten\n" #~ " - Thomas Karl Pietrowski" #~ msgctxt "@info:status" #~ msgid "" #~ "Dear customer,\n" #~ "You are currently running this plugin on an operating system other than Windows. This plugin will only work on Windows with SolidWorks installed, including an valid license. Please install this plugin on a Windows machine with SolidWorks installed.\n" #~ "\n" #~ "With kind regards\n" #~ " - Thomas Karl Pietrowski" #~ msgstr "" #~ "Beste klant,\n" #~ "Momenteel voert u deze plug-in uit op een ander besturingssysteem dan Windows. Deze plug-in werkt alleen op systemen waarop Windows en SolidWorks met een geldige licentie zijn geïnstalleerd. Installeer deze plug-in op een Windows-systeem waarop SolidWorks is geïnstalleerd.\n" #~ "\n" #~ "Met vriendelijke groeten\n" #~ " - Thomas Karl Pietrowski" #~ msgid "Configure" #~ msgstr "Configureren" #~ msgid "Installation guide for SolidWorks macro" #~ msgstr "Installatiegids voor SolidWorks-macro" #~ msgctxt "@action:button" #~ msgid "Disable" #~ msgstr "Uitschakelen" #~ msgctxt "@action:tooltip" #~ msgid "Don't allow Cura to send anonymized usage statistics. You can enable it again in the preferences." #~ msgstr "Cura niet toestaan geanonimiseerde gebruiksgegevens te verzenden. U kunt deze optie op een later tijdstip weer inschakelen in de voorkeuren." #~ msgid "Install" #~ msgstr "Installeren" #~ msgid "Failed to copy Siemens NX plugins files. Please check your UGII_USER_DIR. It is not set to a directory." #~ msgstr "Kan de bestanden voor de Siemens NX-plug-ins niet kopiëren. Controleer uw UGII_USER_DIR. Deze is niet ingesteld op een map." #~ msgid "Successfully installed Siemens NX Cura plugin." #~ msgstr "De Siemens NX Cura-plug-in is geïnstalleerd." #~ msgid "Failed to copy Siemens NX plugins files. Please check your UGII_USER_DIR." #~ msgstr "Kan de bestanden voor de Siemens NX-plug-ins niet installeren. Controleer uw UGII_USER_DIR." #~ msgid "Failed to install Siemens NX plugin. Could not set environment variable UGII_USER_DIR for Siemens NX." #~ msgstr "Kan de Siemens NX-plug-in niet installeren. Het instellen van de omgevingsvariabele UGII_USER_DIR voor Siemens NX is mislukt." #~ msgctxt "@info:status" #~ msgid "Failed to get plugin ID from {0}" #~ msgstr "Kan de plug-in-ID van {0} niet vinden" #~ msgctxt "@info:tile" #~ msgid "Warning" #~ msgstr "Waarschuwing" #~ msgctxt "@window:title" #~ msgid "Plugin browser" #~ msgstr "plug-in-browser" #~ msgctxt "@label" #~ msgid "Ultimaker 3" #~ msgstr "Ultimaker 3" #~ msgctxt "@label" #~ msgid "Ultimaker 3 Extended" #~ msgstr "Ultimaker 3 Extended" #~ msgctxt "@title:window" #~ msgid "SolidWorks: Export wizard" #~ msgstr "SolidWorks: exportwizard" #~ msgctxt "@action:label" #~ msgid "Quality:" #~ msgstr "Kwaliteit:" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Fine (3D-printing)" #~ msgstr "Fijn (3D-printen)" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Coarse (3D-printing)" #~ msgstr "Grof (3D-printen)" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Fine (SolidWorks)" #~ msgstr "Fijn (SolidWorks)" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Coarse (SolidWorks)" #~ msgstr "Grof (SolidWorks)" #~ msgctxt "@text:window" #~ msgid "Show this dialog again" #~ msgstr "Dit dialoogvenster opnieuw tonen" #~ msgctxt "@action:button" #~ msgid "Continue" #~ msgstr "Verder" #~ msgctxt "@action:button" #~ msgid "Abort" #~ msgstr "Afbreken" #~ msgctxt "@title:window" #~ msgid "How to install Cura SolidWorks macro" #~ msgstr "De Cura SolidWorks-macro installeren" #~ msgctxt "@description:label" #~ msgid "Steps:" #~ msgstr "Stappen:" #~ msgctxt "@action:button" #~ msgid "" #~ "Open the directory\n" #~ "with macro and icon" #~ msgstr "" #~ "Open de map\n" #~ "met macro en pictogram" #~ msgctxt "@description:label" #~ msgid "Instructions:" #~ msgstr "Instructies:" #~ msgctxt "@action:playpause" #~ msgid "Play" #~ msgstr "Afspelen" #~ msgctxt "@action:playpause" #~ msgid "Pause" #~ msgstr "Pauzeren" #~ msgctxt "@action:button" #~ msgid "Previous Step" #~ msgstr "Vorige stap" #~ msgctxt "@action:button" #~ msgid "Done" #~ msgstr "Gereed" #~ msgctxt "@action:button" #~ msgid "Next Step" #~ msgstr "Volgende stap" #~ msgctxt "@title:window" #~ msgid "SolidWorks plugin: Configuration" #~ msgstr "SolidWorks-plug-in: configuratie" #~ msgctxt "@title:tab" #~ msgid "Conversion settings" #~ msgstr "Conversie-instellingen" #~ msgctxt "@label" #~ msgid "First choice:" #~ msgstr "Eerste keuze:" #~ msgctxt "@text:menu" #~ msgid "Latest installed version (Recommended)" #~ msgstr "Recentst geïnstalleerde versie (aanbevolen)" #~ msgctxt "@text:menu" #~ msgid "Default version" #~ msgstr "Standaardversie" #~ msgctxt "@label" #~ msgid "Show wizard before opening SolidWorks files" #~ msgstr "Wizard tonen voordat SolidWorks-bestanden worden geopend" #~ msgctxt "@label" #~ msgid "Automatically rotate opened file into normed orientation" #~ msgstr "Geopend bestand automatisch roteren naar de genormaliseerde stand" #~ msgctxt "@title:tab" #~ msgid "Installation(s)" #~ msgstr "Installatie(s)" #~ msgctxt "@label" #~ msgid "COM service found" #~ msgstr "COM-service gevonden" #~ msgctxt "@label" #~ msgid "Executable found" #~ msgstr "Uitvoerbaar bestand gevonden" #~ msgctxt "@label" #~ msgid "COM starting" #~ msgstr "COM starten" #~ msgctxt "@label" #~ msgid "Revision number" #~ msgstr "Revisienummer" #~ msgctxt "@label" #~ msgid "Functions available" #~ msgstr "Beschikbare functies" #~ msgctxt "@label (%1 is object name)" #~ msgid "The new material diameter is set to %1 mm, which is not compatible to the current machine. Do you wish to continue?" #~ msgstr "Het nieuwe materiaal is ingesteld op %1 mm. Dit is niet compatibel met de huidige machine. Wilt u verder gaan?" #~ msgctxt "@action:menu" #~ msgid "Browse plugins..." #~ msgstr "Door plug-ins bladeren..." #~ msgctxt "@title:menu menubar:toplevel" #~ msgid "P&lugins" #~ msgstr "&Plugins" #~ msgctxt "@window:title" #~ msgid "Install Plugin" #~ msgstr "plug-in installeren" #~ msgctxt "description" #~ msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc)" #~ msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen" #~ msgctxt "description" #~ msgid "Manages network connections to Ultimaker 3 printers" #~ msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker 3-printers" #~ msgctxt "description" #~ msgid "Gives you the possibility to open certain files using SolidWorks itself. Conversion is done by this plugin and additional optimizations." #~ msgstr "Deze optie biedt u de mogelijkheid bepaalde bestanden via SolidWorks te openen. De bestanden worden vervolgens via deze plug-in geconverteerd en geoptimaliseerd." #~ msgctxt "name" #~ msgid "SolidWorks Integration" #~ msgstr "SolidWorks-integratie" #~ msgctxt "description" #~ msgid "Automatically saves Preferences, Machines and Profiles after changes." #~ msgstr "Slaat na het aanbrengen van wijzigingen automatisch Voorkeuren, Machines en Profielen op." #~ msgctxt "name" #~ msgid "Auto Save" #~ msgstr "Automatisch Opslaan" #~ msgctxt "description" #~ msgid "Helps you to install an 'export to Cura' button in Siemens NX." #~ msgstr "Hiermee kunt u een knop installeren in Siemens NX om te 'exporteren naar Cura'." #~ msgctxt "name" #~ msgid "Siemens NX Integration" #~ msgstr "Siemens NX Integratie" #~ msgctxt "description" #~ msgid "Find, manage and install new plugins." #~ msgstr "Zoek, beheer en installeer nieuwe plug-ins." #~ msgctxt "name" #~ msgid "Plugin Browser" #~ msgstr "plug-in-browser" #~ msgctxt "description" #~ msgid "Ask the user once if he/she agrees with our license" #~ msgstr "Vraag de gebruiker één keer of deze akkoord gaat met de licentie" #~ msgctxt "description" #~ msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc)" #~ msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)" #~ msgctxt "@item:inlistbox" #~ msgid "GCode File" #~ msgstr "G-code-bestand" #~ msgctxt "@info:status" #~ msgid "Unable to start a new job because the printer is busy or not connected." #~ msgstr "Er kan geen nieuwe taak worden gestart omdat de printer bezig is of niet aangesloten is." #~ msgctxt "@info:title" #~ msgid "Printer Unavailable" #~ msgstr "Printer is niet beschikbaar" #~ msgctxt "@info:status" #~ msgid "This printer does not support USB printing because it uses UltiGCode flavor." #~ msgstr "De printer biedt geen ondersteuning voor USB-printen omdat deze de codeversie UltiGCode gebruikt." #~ msgctxt "@info:title" #~ msgid "USB Printing" #~ msgstr "USB-printen" #~ msgctxt "@info:status" #~ msgid "Unable to start a new job because the printer does not support usb printing." #~ msgstr "Er kan geen nieuwe taak worden gestart omdat de printer geen ondersteuning biedt voor USB-printen." #~ msgctxt "@info" #~ msgid "Unable to update firmware because there are no printers connected." #~ msgstr "De firmware kan niet worden bijgewerkt omdat er geen printers zijn aangesloten." #~ msgctxt "@info" #~ msgid "Could not find firmware required for the printer at %s." #~ msgstr "De voor de printer benodigde software is niet op %s te vinden." #~ msgctxt "@info:title" #~ msgid "Printer Firmware" #~ msgstr "Firmware van uw printer" #~ msgctxt "@info:title" #~ msgid "Connection status" #~ msgstr "Verbindingsstatus" #~ msgctxt "@info:title" #~ msgid "Connection Status" #~ msgstr "Verbindingsstatus" #~ msgctxt "@info:status" #~ msgid "Access request was denied on the printer." #~ msgstr "Toegang is op de printer geweigerd." #~ msgctxt "@info:status" #~ msgid "Access request failed due to a timeout." #~ msgstr "De toegangsaanvraag is mislukt vanwege een time-out." #~ msgctxt "@info:status" #~ msgid "The connection with the network was lost." #~ msgstr "De verbinding met het netwerk is verbroken." #~ msgctxt "@info:status" #~ msgid "The connection with the printer was lost. Check your printer to see if it is connected." #~ msgstr "De verbinding met de printer is verbroken. Controleer of de printer nog is aangesloten." #~ msgctxt "@info:status" #~ msgid "Unable to start a new print job, printer is busy. Current printer status is %s." #~ msgstr "Er kan geen nieuwe taak worden gestart omdat de printer bezig is. De huidige printerstatus is %s." #~ msgctxt "@info:title" #~ msgid "Printer Status" #~ msgstr "Printerstatus" #~ msgctxt "@info:status" #~ msgid "Unable to start a new print job. No Printcore loaded in slot {0}" #~ msgstr "Er kan geen nieuwe taak worden gestart. Er is geen PrintCore geladen in de sleuf {0}." #~ msgctxt "@info:status" #~ msgid "Unable to start a new print job. No material loaded in slot {0}" #~ msgstr "Er kan geen nieuwe taak worden gestart. Er is geen materiaal geladen in de sleuf {0}." #~ msgctxt "@label" #~ msgid "Not enough material for spool {0}." #~ msgstr "Er is onvoldoende materiaal voor de spool {0}." #~ msgctxt "@label" #~ msgid "Different PrintCore (Cura: {0}, Printer: {1}) selected for extruder {2}" #~ msgstr "Afwijkende PrintCore (Cura: {0}, Printer: {1}) geselecteerd voor de extruder {2}" #~ msgctxt "@label" #~ msgid "PrintCore {0} is not properly calibrated. XY calibration needs to be performed on the printer." #~ msgstr "De PrintCore {0} is niet correct gekalibreerd. Op de printer moet XY-kalibratie worden uitgevoerd." #~ msgctxt "@info:status" #~ msgid "Unable to send data to printer. Is another job still active?" #~ msgstr "Kan geen gegevens naar de printer verzenden. Is er nog een andere taak actief?" #~ msgctxt "@label:MonitorStatus" #~ msgid "Print aborted. Please check the printer" #~ msgstr "Print afgebroken. Controleer de printer" #~ msgctxt "@label:MonitorStatus" #~ msgid "Pausing print..." #~ msgstr "Print onderbreken..." #~ msgctxt "@label:MonitorStatus" #~ msgid "Resuming print..." #~ msgstr "Print hervatten..." #~ msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." #~ msgstr "Deze printer is niet ingesteld voor het hosten van een groep aangesloten Ultimaker 3-printers." #~ msgctxt "Count is number of printers." #~ msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." #~ msgstr "Deze printer is de host voor een groep van {count} aangesloten Ultimaker 3-printers." #~ msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." #~ msgstr "{printer_name} heeft '{job_name}' voltooid. Haal de print op en bevestig dat het platform is leeggemaakt." #~ msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." #~ msgstr "{printer_name} is gereserveerd voor het printen van '{job_name}'. Wijzig de instellingen van de printer zodanig dat ze aansluiten bij de taak, zodat u kunt beginnen met printen." #~ msgctxt "@info:status" #~ msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." #~ msgstr "Kan geen nieuwe printtaak verzenden: deze 3D-printer is (nog) niet ingesteld voor het hosten van een groep aangesloten Ultimaker 3-printers." #~ msgctxt "@info:status" #~ msgid "Unable to send print job to group {cluster_name}." #~ msgstr "Kan de printtaak niet naar groep {cluster_name} verzenden." #~ msgctxt "@info:status" #~ msgid "Sent {file_name} to group {cluster_name}." #~ msgstr "{file_name} is verzonden naar groep {cluster_name}." #~ msgctxt "@action:button" #~ msgid "Show print jobs" #~ msgstr "Printtaken weergeven" #~ msgctxt "@info:tooltip" #~ msgid "Opens the print jobs interface in your browser." #~ msgstr "Opent de printtaken-interface in uw browser." #~ msgctxt "@label Printer name" #~ msgid "Unknown" #~ msgstr "Onbekend" #~ msgctxt "@info:progress" #~ msgid "Sending {file_name} to group {cluster_name}" #~ msgstr "Bezig met verzenden van {file_name} naar groep {cluster_name}" #~ msgctxt "@info:status" #~ msgid "SolidWorks reported errors, while opening your file. We recommend to solve these issues inside SolidWorks itself." #~ msgstr "SolidWorks heeft fouten gerapporteerd tijdens het openen van uw bestand. Het wordt aanbevolen deze problemen binnen SolidWorks zelf op te lossen." #~ msgctxt "@info:status" #~ msgid "" #~ "Found no models inside your drawing. Could you please check it's content again and make sure one part or assembly is inside?\n" #~ "\n" #~ " Thanks!." #~ msgstr "" #~ "In uw tekening zijn geen modellen gevonden. Controleer de inhoud en zorg ervoor dat zich in de tekening een onderdeel of assemblage bevindt.\n" #~ "\n" #~ " Hartelijk dank." #~ msgctxt "@info:status" #~ msgid "" #~ "Found more then one part or assembly inside your drawing. We currently only support drawings with exactly one part or assembly inside.\n" #~ "\n" #~ "Sorry!" #~ msgstr "" #~ "In uw tekening is meer dan één onderdeel of assemblage gevonden. Momenteel worden alleen tekeningen met precies één onderdeel of assemblage ondersteund.\n" #~ "\n" #~ "Sorry." #~ msgctxt "@item:material" #~ msgid "No material loaded" #~ msgstr "Geen materiaal ingevoerd" #~ msgctxt "@item:material" #~ msgid "Unknown material" #~ msgstr "Onbekend materiaal" #~ msgctxt "@info:status Has a cancel button next to it." #~ msgid "The selected material diameter causes the material to become incompatible with the current printer." #~ msgstr "Het materiaal is niet meer compatibel met de huidige printer vanwege de geselecteerde materiaaldiameter." #~ msgctxt "@action:button" #~ msgid "Undo" #~ msgstr "Ongedaan maken" #~ msgctxt "@action" #~ msgid "Undo changing the material diameter." #~ msgstr "Maak wijzigen van de materiaaldiameter ongedaan." #~ msgctxt "@info:status Don't translate the XML tags or !" #~ msgid "The machine defined in profile {0} doesn't match with your current machine, could not import it." #~ msgstr "De machine die is vastgelegd in het profiel {0} komt niet overeen met uw huidige machine. Kan het profiel niet importeren." #~ msgctxt "@label crash message" #~ msgid "" #~ "

    A fatal error has occurred. Please send us this Crash Report to fix the problem

    \n" #~ "

    Please use the \"Send report\" button to post a bug report automatically to our servers

    \n" #~ " " #~ msgstr "" #~ "

    Er is een fatale fout opgetreden. Stuur ons het Crashrapport om het probleem op te lossen

    \n" #~ "

    Druk op de knop \"Rapport verzenden\" om het foutenrapport automatisch naar onze servers te verzenden

    \n" #~ " " #~ msgctxt "@label" #~ msgid "not yet initialised
    " #~ msgstr "nog niet geïnitialiseerd
    " #~ msgctxt "@label" #~ msgid "Gcode flavor" #~ msgstr "Versie G-code" #~ msgctxt "@label" #~ msgid "Start Gcode" #~ msgstr "Start G-code" #~ msgctxt "@tooltip" #~ msgid "Gcode commands to be executed at the very start." #~ msgstr "G-code-opdrachten die aan het begin worden uitgevoerd." #~ msgctxt "@label" #~ msgid "End Gcode" #~ msgstr "Eind G-code" #~ msgctxt "@tooltip" #~ msgid "Gcode commands to be executed at the very end." #~ msgstr "G-code-opdrachten die aan het eind worden uitgevoerd." #~ msgctxt "@label" #~ msgid "Extruder Start Gcode" #~ msgstr "Start-G-code van extruder" #~ msgctxt "@label" #~ msgid "Extruder End Gcode" #~ msgstr "Eind-G-code van extruder" #~ msgctxt "@label" #~ msgid "Starting firmware update, this may take a while." #~ msgstr "De firmware-update wordt gestart; dit kan enige tijd duren." #~ msgctxt "@label" #~ msgid "Unknown error code: %1" #~ msgstr "Onbekende foutcode: %1" #~ msgctxt "@label Printer name" #~ msgid "Ultimaker 3" #~ msgstr "Ultimaker 3" #~ msgctxt "@label Printer name" #~ msgid "Ultimaker 3 Extended" #~ msgstr "Ultimaker 3 Extended" #~ msgctxt "@label Printer status" #~ msgid "Unknown" #~ msgstr "Onbekend" #~ msgctxt "@title:window" #~ msgid "Find & Update plugins" #~ msgstr "Plug-ins zoeken en bijwerken" #~ msgctxt "@label" #~ msgid "Here you can find a list of Third Party plugins." #~ msgstr "Hier vindt u een lijst met plug-ins van derden." #~ msgctxt "@action:button" #~ msgid "Upgrade" #~ msgstr "Upgrade" #~ msgctxt "@action:button" #~ msgid "Download" #~ msgstr "Downloaden" #~ msgctxt "@info:tooltip" #~ msgid "Show caution message in gcode reader." #~ msgstr "Toon het waarschuwingsbericht in de G-code-lezer." #~ msgctxt "@option:check" #~ msgid "Caution message in gcode reader" #~ msgstr "Waarschuwingsbericht in de G-code-lezer" #~ msgctxt "@window:title" #~ msgid "Import Profile" #~ msgstr "Profiel Importeren" #~ msgctxt "@action:label %1 is printer name, %2 is how this printer names variants, %3 is variant name" #~ msgid "Printer: %1, %2: %3" #~ msgstr "Printer: %1, %2: %3" #~ msgctxt "@action:label %1 is printer name" #~ msgid "Printer: %1" #~ msgstr "Printer: %1" #~ msgctxt "@label" #~ msgid "GCode generator" #~ msgstr "G-code-schrijver" #~ msgctxt "@action:menu" #~ msgid "Configure setting visiblity..." #~ msgstr "Zichtbaarheid van instelling configureren..." #~ msgctxt "@title:menuitem %1 is the automatically selected material" #~ msgid "Automatic: %1" #~ msgstr "Automatisch: %1" #~ msgctxt "@title:menuitem %1 is the nozzle currently loaded in the printer" #~ msgid "Automatic: %1" #~ msgstr "Automatisch: %1" #~ msgctxt "@info:status" #~ msgid "No printer connected" #~ msgstr "Er is geen printer aangesloten" #~ msgctxt "@tooltip" #~ msgid "The current temperature of this extruder." #~ msgstr "De huidige temperatuur van deze extruder." #~ msgctxt "@action:menu" #~ msgid "Installed plugins..." #~ msgstr "Geïnstalleerde plugins..." #~ msgctxt "@label" #~ msgid "Support Extruder" #~ msgstr "Extruder voor supportstructuur" #~ msgctxt "description" #~ msgid "Writes GCode to a file." #~ msgstr "Schrijft G-code naar een bestand." #~ msgctxt "name" #~ msgid "GCode Writer" #~ msgstr "G-code-schrijver" #~ msgctxt "name" #~ msgid "GCode Profile Reader" #~ msgstr "G-code-profiellezer" #~ msgctxt "@info:status" #~ msgid "Errors appeared while opening your SolidWorks file! Please check, whether it is possible to open your file in SolidWorks itself without any problems as well!" #~ msgstr "Er zijn fouten opgetreden tijdens het openen van het SolidWorks-bestand. Controleer of u het bestand zonder problemen in SolidWorks kunt openen." #~ msgctxt "@info:status" #~ msgid "Error while starting %s!" #~ msgstr "Er is een fout opgetreden tijdens het starten van %s!" #~ msgctxt "@item:inlistbox" #~ msgid "Simulation view" #~ msgstr "Simulatieweergave" #~ msgctxt "@info" #~ msgid "Cura collects anonymised slicing statistics. You can disable this in the preferences." #~ msgstr "Cura verzamelt geanonimiseerde slicing-statistieken. Dit kan bij de voorkeuren worden uitgeschakeld." #~ msgctxt "@action:button" #~ msgid "Dismiss" #~ msgstr "Verwijderen" #~ msgctxt "@menuitem" #~ msgid "Global" #~ msgstr "Algemeen" #~ msgctxt "@label crash message" #~ msgid "" #~ "

    A fatal exception has occurred. Please send us this Crash Report to fix the problem

    \n" #~ "

    Please use the \"Send report\" button to post a bug report automatically to our servers

    \n" #~ " " #~ msgstr "" #~ "

    Er is een fatale uitzondering opgetreden. Stuur ons het Crashrapport om het probleem op te lossen

    \n" #~ "

    Druk op de knop \"Rapport verzenden\" om het foutenrapport automatisch naar onze servers te verzenden

    \n" #~ " " #~ msgctxt "@label Cura version" #~ msgid "Cura version: {version}
    " #~ msgstr "Cura-versie: {version}
    " #~ msgctxt "@label Platform" #~ msgid "Platform: {platform}
    " #~ msgstr "Platform: {platform}
    " #~ msgctxt "@label Qt version" #~ msgid "Qt version: {qt}
    " #~ msgstr "Qt-versie: {qt}
    " #~ msgctxt "@label PyQt version" #~ msgid "PyQt version: {pyqt}
    " #~ msgstr "PyQt-versie: {pyqt}
    " #~ msgctxt "@label OpenGL" #~ msgid "OpenGL: {opengl}
    " #~ msgstr "OpenGL: {opengl}
    " #~ msgctxt "@title:groupbox" #~ msgid "Exception traceback" #~ msgstr "Traceback van uitzondering" #~ msgctxt "@label" #~ msgid "Material diameter" #~ msgstr "Materiaaldiameter" #~ msgctxt "@title:window" #~ msgid "Cura SolidWorks Plugin Configuration" #~ msgstr "Configuratie Cura SolidWorks-plug-in" #~ msgctxt "@action:label" #~ msgid "Default quality of the exported STL:" #~ msgstr "Standaard kwaliteit van de geëxporteerde STL:" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Always ask" #~ msgstr "Altijd vragen" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Always use Fine quality" #~ msgstr "Altijd Fijne kwaliteit gebruiken" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Always use Coarse quality" #~ msgstr "Altijd Grove kwaliteit gebruiken" #~ msgctxt "@title:window" #~ msgid "Import SolidWorks File as STL..." #~ msgstr "SolidWorks-bestand importeren als STL..." #~ msgctxt "@info:tooltip" #~ msgid "Quality of the Exported STL" #~ msgstr "Kwaliteit van de geëxporteerde STL" #~ msgctxt "@action:label" #~ msgid "Quality" #~ msgstr "Kwaliteit" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Coarse" #~ msgstr "Grof" #~ msgctxt "@option:curaSolidworksStlQuality" #~ msgid "Fine" #~ msgstr "Fijn" #~ msgctxt "@" #~ msgid "No Profile Available" #~ msgstr "Er is geen profiel beschikbaar" #~ msgctxt "@label" #~ msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders" #~ msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd" #~ msgctxt "@tooltip" #~ msgid "Time specification
    " #~ msgstr "Tijdspecificatie
    " #~ msgctxt "@action:inmenu menubar:view" #~ msgid "&Reset camera position" #~ msgstr "Camerapositie he&rstellen" #~ msgctxt "@title:menu menubar:file" #~ msgid "Save project" #~ msgstr "Project opslaan" #~ msgctxt "@title:tab" #~ msgid "Prepare" #~ msgstr "Voorbereiden" #~ msgctxt "@title:tab" #~ msgid "Monitor" #~ msgstr "Controleren" #~ msgctxt "@label" #~ msgid "Check compatibility" #~ msgstr "Compatibiliteit controleren" #~ msgctxt "description" #~ msgid "Gives you the possibility to open certain files via SolidWorks itself. These are then converted and loaded into Cura" #~ msgstr "Hiermee hebt u de mogelijkheid bepaalde bestanden via SolidWorks te openen. De bestanden worden vervolgens geconverteerd en in Cura geladen" #~ msgctxt "@label:status" #~ msgid "Blocked" #~ msgstr "Geblokkeerd" #~ msgctxt "@label:status" #~ msgid "Can't start print" #~ msgstr "Print start niet" #~ msgctxt "@action:button" #~ msgid "Open Connect.." #~ msgstr "Connect openen" #~ msgctxt "@info:title" #~ msgid "Print Details" #~ msgstr "Printgegevens" #~ msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" #~ msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." #~ msgstr "Om ervoor te zorgen dat uw {machine_name} van de nieuwste functies is voorzien, wordt aanbevolen om de firmware regelmatig bij te werken. U kunt dit doen op de {machine_name} (wanneer deze is verbonden met het netwerk) of via USB." #~ msgctxt "@info:title" #~ msgid "Layer View" #~ msgstr "Laagweergave" #~ msgctxt "@menuitem" #~ msgid "Browse plugins" #~ msgstr "Door plug-ins bladeren" #~ msgctxt "@info:title" #~ msgid "Export Details" #~ msgstr "Exportgegevens" #~ msgctxt "@label" #~ msgid "" #~ "

    A fatal exception has occurred that we could not recover from!

    \n" #~ "

    Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

    \n" #~ " " #~ msgstr "" #~ "

    Er is een fatale fout opgetreden die niet kan worden hersteld!

    \n" #~ "

    Gebruik de onderstaande informatie om een bugrapport te plaatsen op http://github.com/Ultimaker/Cura/issues

    \n" #~ " " #~ msgctxt "@action:button" #~ msgid "Open Web Page" #~ msgstr "Webpagina openen" #~ msgctxt "@action:button" #~ msgid "Ok" #~ msgstr "OK" #~ msgctxt "@label" #~ msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" #~ msgstr "Deze printer is niet ingesteld voor het hosten van een groep aaneengesloten Ultimaker 3-printers" #~ msgctxt "@label" #~ msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" #~ msgstr "Deze printer is de host voor een groep van %1 aaneengesloten Ultimaker 3-printers" #~ msgctxt "@label" #~ msgid "Completed on: " #~ msgstr "Voltooid op: " #~ msgctxt "@info:tooltip" #~ msgid "Opens the print jobs page with your default web browser." #~ msgstr "Opent de pagina met printtaken in uw standaard webbrowser." #~ msgctxt "@label" #~ msgid "PRINTER GROUP" #~ msgstr "PRINTERGROEP" #~ msgctxt "@action:warning" #~ msgid "Loading a project will clear all models on the buildplate" #~ msgstr "Als u een project laadt, worden alle modellen van het platform gewist" #~ msgctxt "@label" #~ msgid "" #~ " plugin contains a license.\n" #~ "You need to accept this license to install this plugin.\n" #~ "Do you agree with the terms below?" #~ msgstr "" #~ " plug-in bevat een licentie.\n" #~ "U moet akkoord gaan met deze licentie om deze plug-ins te mogen installeren.\n" #~ "Gaat u akkoord met onderstaande voorwaarden?" #~ msgctxt "@label" #~ msgid "00h 00min" #~ msgstr "00u 00min" #~ msgctxt "@tooltip" #~ msgid "Time information" #~ msgstr "Tijdsinformatie" #~ msgctxt "@description" #~ msgid "Print time" #~ msgstr "Printtijd" #~ msgctxt "@label" #~ msgid "%1m / ~ %2g / ~ %4 %3" #~ msgstr "%1m / ~ %2g / ~ %4 %3" #~ msgctxt "@label" #~ msgid "%1m / ~ %2g" #~ msgstr "%1m / ~ %2g" #~ msgctxt "@title:window" #~ msgid "Cura" #~ msgstr "Cura" #~ msgctxt "@label" #~ msgid "Check material compatibility" #~ msgstr "Materiaalcompatibiliteit controleren" #~ msgctxt "name" #~ msgid "UM3 Network Connection (Cluster)" #~ msgstr "UM3-netwerkverbinding (Cluster)" #~ msgctxt "description" #~ msgid "Provides the Layer view." #~ msgstr "Biedt een laagweergave." #~ msgctxt "name" #~ msgid "Layer View" #~ msgstr "Laagweergave" #~ msgctxt "@item:inlistbox" #~ msgid "X-Ray" #~ msgstr "Röntgen" #~ msgctxt "@label" #~ msgid "Doodle3D" #~ msgstr "Doodle3D" #~ msgctxt "@info:whatsthis" #~ msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." #~ msgstr "Accepteert G-code en verzendt deze code via WiFi naar een Doodle3D WiFi-Box." #~ msgctxt "@item:inmenu" #~ msgid "Doodle3D printing" #~ msgstr "Doodle3D-printen" #~ msgctxt "@action:button" #~ msgid "Print with Doodle3D" #~ msgstr "Printen via Doodle3D" #~ msgctxt "@info:tooltip" #~ msgid "Print with " #~ msgstr "Printen via" #~ msgctxt "@title:menu" #~ msgid "Doodle3D" #~ msgstr "Doodle3D" #~ msgctxt "@item:inlistbox" #~ msgid "Enable Scan devices..." #~ msgstr "Scanners inschakelen..." #~ msgctxt "@info:progress" #~ msgid "Saving to Removable Drive {0}" #~ msgstr "Opslaan op Verwisselbaar Station {0}" #~ msgctxt "@info:status" #~ msgid "Could not save to {0}: {1}" #~ msgstr "Kan niet opslaan als {0}: {1}" #~ msgctxt "@info:status" #~ msgid "Please keep in mind, that you have to reopen your SolidWorks file manually! Reloading the model won't work!" #~ msgstr "Houd er rekening mee dat u het SolidWorks-bestand handmatig opnieuw moet openen. Het opnieuw laden van het bestand zal geen effect hebben." #~ msgctxt "@item:inlistbox" #~ msgid "Layers" #~ msgstr "Lagen" #~ msgid "Browse plugins" #~ msgstr "Vind plug-ins" #~ msgctxt "@item:inmenu" #~ msgid "Solid" #~ msgstr "Solide" #~ msgctxt "@label" #~ msgid "The file {0} already exists. Are you sure you want to overwrite it?" #~ msgstr "Het bestand {0} bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?" #~ msgctxt "@info:status" #~ msgid "Failed to export profile to {0}: {1}" #~ msgstr "Kan het profiel niet exporteren als {0}: {1}" #~ msgctxt "@info:status" #~ msgid "Failed to export profile to {0}: Writer plugin reported failure." #~ msgstr "Kan het profiel niet exporteren als {0}: de plug-in voor de schrijver heeft een fout gerapporteerd." #~ msgctxt "@info:status" #~ msgid "Exported profile to {0}" #~ msgstr "Het profiel is geëxporteerd als {0}" #~ msgctxt "@info:status" #~ msgid "Failed to import profile from {0}: {1}" #~ msgstr "Kan het profiel niet importeren uit {0}: {1}" #~ msgctxt "@title:window" #~ msgid "Doodle3D Settings" #~ msgstr "Doodle3D-instellingen" #~ msgctxt "@title:window" #~ msgid "Print to: %1" #~ msgstr "Printen naar: %1" #~ msgctxt "@label" #~ msgid "Extruder Temperature: %1/%2°C" #~ msgstr "Extrudertemperatuur: %1/%2°C" #~ msgctxt "@label" #~ msgid "Bed Temperature: %1/%2°C" #~ msgstr "Printbedtemperatuur: %1/%2°C" #~ msgctxt "@label" #~ msgid "%1" #~ msgstr "%1" #~ msgctxt "@label" #~ msgid "View Mode: Layers" #~ msgstr "Weergavemodus: lagen" #~ msgctxt "@info:status" #~ msgid "Could not import material %1: %2" #~ msgstr "Kon materiaal %1 niet importeren: %2" #~ msgctxt "@info:status" #~ msgid "Successfully imported material %1" #~ msgstr "Materiaal %1 is geïmporteerd" #~ msgctxt "@info:status" #~ msgid "Failed to export material to %1: %2" #~ msgstr "Exporteren van materiaal naar %1 is mislukt: %2" #~ msgctxt "@info:status" #~ msgid "Successfully exported material to %1" #~ msgstr "Materiaal is geëxporteerd naar %1" #~ msgctxt "@label" #~ msgid "%1 m / ~ %2 g / ~ %4 %3" #~ msgstr "%1 m / ~ %2 g / ~ %4 %3" #~ msgctxt "@label" #~ msgid "%1 m / ~ %2 g" #~ msgstr "%1 m / ~ %2 g" #~ msgctxt "@label" #~ msgid "Hotend" #~ msgstr "Hotend" #~ msgctxt "@action:button" #~ msgid "View Mode" #~ msgstr "Weergavemodus" #~ msgctxt "@title:tab" #~ msgid "Print" #~ msgstr "Printen" #~ msgctxt "@label" #~ msgid "0%" #~ msgstr "0%" #~ msgctxt "@label" #~ msgid "Empty infill will leave your model hollow with low strength." #~ msgstr "Zonder vulling blijft uw model hol en heeft deze weinig sterkte." #~ msgctxt "@label" #~ msgid "20%" #~ msgstr "20%" #~ msgctxt "@label" #~ msgid "Light (20%) infill will give your model an average strength." #~ msgstr "Met lichte vulling (20%) krijgt uw model een gemiddelde sterkte." #~ msgctxt "@label" #~ msgid "50%" #~ msgstr "50%" #~ msgctxt "@label" #~ msgid "Dense (50%) infill will give your model an above average strength." #~ msgstr "Met een dichte vulling (50%) krijgt uw model een bovengemiddelde sterkte." #~ msgctxt "@label" #~ msgid "100%" #~ msgstr "100%" #~ msgctxt "@label" #~ msgid "Solid (100%) infill will make your model completely solid." #~ msgstr "Met solide vulling (100%) is uw model volledig massief." #~ msgctxt "@label" #~ msgid "Gradual" #~ msgstr "Geleidelijk" #~ msgctxt "description" #~ msgid "Provides support for writing X3G files" #~ msgstr "Biedt ondersteuning voor het schrijven van X3G-bestanden." #~ msgctxt "name" #~ msgid "X3G Writer" #~ msgstr "X3G-schrijver" #~ msgctxt "@label" #~ msgid "Machine Settings action" #~ msgstr "Actie machine-instellingen" #~ msgctxt "@info:whatsthis" #~ msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc)" #~ msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle enz.) te wijzigen" #~ msgctxt "@label" #~ msgid "X-Ray View" #~ msgstr "Röntgenweergave" #~ msgctxt "@info:whatsthis" #~ msgid "Provides the X-Ray view." #~ msgstr "Biedt de röntgenweergave." #~ msgctxt "@label" #~ msgid "X3D Reader" #~ msgstr "X3D-lezer" #~ msgctxt "@info:whatsthis" #~ msgid "Provides support for reading X3D files." #~ msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden." #~ msgctxt "@label" #~ msgid "GCode Writer" #~ msgstr "G-code-schrijver" #~ msgctxt "@info:whatsthis" #~ msgid "Writes GCode to a file." #~ msgstr "Schrijft G-code naar een bestand." #~ msgctxt "@action:button Preceded by 'Ready to'." #~ msgid "Print with Doodle3D" #~ msgstr "Printen via Doodle3D" #~ msgctxt "@info:whatsthis" #~ msgid "Shows changes since latest checked version." #~ msgstr "Geeft de wijzigingen weer ten opzichte van de laatst gecontroleerde versie." #~ msgctxt "@label" #~ msgid "Profile flatener" #~ msgstr "Profielvlakker" #~ msgctxt "@info:whatsthis" #~ msgid "Create a flattend quality changes profile." #~ msgstr "Hiermee maakt u een afgevlakte versie van het gewijzigde profiel." #~ msgctxt "@label" #~ msgid "USB printing" #~ msgstr "USB-printen" #~ msgctxt "@info:whatsthis" #~ msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware." #~ msgstr "Accepteert G-code en verzendt deze code naar een printer. Via de plug-in kan tevens de firmware worden bijgewerkt." #~ msgctxt "X3G Writer Plugin Description" #~ msgid "Writes X3G to a file" #~ msgstr "Schrijft X3G-code naar een bestand." #~ msgctxt "@label" #~ msgid "Removable Drive Output Device Plugin" #~ msgstr "Plug-in voor Verwijderbaar Uitvoerapparaat" #~ msgctxt "@info:whatsthis" #~ msgid "Provides removable drive hotplugging and writing support." #~ msgstr "Biedt hotplug- en schrijfondersteuning voor verwisselbare stations." #~ msgctxt "@info:whatsthis" #~ msgid "Manages network connections to Ultimaker 3 printers" #~ msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker 3-printers" #~ msgctxt "@label" #~ msgid "Different print core (Cura: {0}, Printer: {1}) selected for extruder {2}" #~ msgstr "Afwijkende PrintCore (Cura: {0}, Printer: {1}) geselecteerd voor de extruder {2}" #~ msgctxt "@label" #~ msgid "Print core {0} is not properly calibrated. XY calibration needs to be performed on the printer." #~ msgstr "De PrintCore {0} is niet correct gekalibreerd. Op de printer moet XY-kalibratie worden uitgevoerd." #~ msgctxt "@label" #~ msgid "The print cores and/or materials on your printer differ from those within your current project. For the best result, always slice for the print cores and materials that are inserted in your printer." #~ msgstr "De PrintCores en/of materialen in de printer wijken af van de PrintCores en/of materialen in uw huidige project. Slice voor het beste resultaat altijd voor de PrintCores en materialen die in de printer zijn ingevoerd." #~ msgctxt "@label" #~ msgid "Post Processing" #~ msgstr "Nabewerking" #~ msgctxt "Description of plugin" #~ msgid "Extension that allows for user created scripts for post processing" #~ msgstr "Uitbreiding waarmee door de gebruiker gemaakte scripts voor nabewerking kunnen worden gebruikt" #~ msgctxt "@label" #~ msgid "Auto Save" #~ msgstr "Automatisch Opslaan" #~ msgctxt "@info:whatsthis" #~ msgid "Automatically saves Preferences, Machines and Profiles after changes." #~ msgstr "Slaat na het aanbrengen van wijzigingen automatisch Voorkeuren, Machines en Profielen op." #~ msgctxt "@label" #~ msgid "Slice info" #~ msgstr "Slice-informatie" #~ msgctxt "@info:whatsthis" #~ msgid "Submits anonymous slice info. Can be disabled through preferences." #~ msgstr "Verzendt anoniem slice-informatie. Dit kan in de voorkeuren worden uitgeschakeld." #~ msgctxt "@info" #~ msgid "Cura collects anonymised slicing statistics. You can disable this in preferences" #~ msgstr "Cura verzamelt geanonimiseerde slicing-statistieken. Dit kan in de voorkeuren worden uitgeschakeld" #~ msgctxt "@label" #~ msgid "Material Profiles" #~ msgstr "Materiaalprofielen" #~ msgctxt "@info:whatsthis" #~ msgid "Provides capabilities to read and write XML-based material profiles." #~ msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven." #~ msgctxt "@label" #~ msgid "Legacy Cura Profile Reader" #~ msgstr "Lezer voor Profielen van Oudere Cura-versies" #~ msgctxt "@info:whatsthis" #~ msgid "Provides support for importing profiles from legacy Cura versions." #~ msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies." #~ msgctxt "@label" #~ msgid "GCode Profile Reader" #~ msgstr "G-code-profiellezer" #~ msgctxt "@info:whatsthis" #~ msgid "Provides support for importing profiles from g-code files." #~ msgstr "Deze optie biedt ondersteuning voor het importeren van profielen uit G-code-bestanden." #~ msgctxt "@label" #~ msgid "Layer View" #~ msgstr "Laagweergave" #~ msgctxt "@info:whatsthis" #~ msgid "Provides the Layer view." #~ msgstr "Biedt een laagweergave." #~ msgctxt "@label" #~ msgid "Version Upgrade 2.5 to 2.6" #~ msgstr "Versie-upgrade van 2.5 naar 2.6." #~ msgctxt "@info:whatsthis" #~ msgid "Upgrades configurations from Cura 2.5 to Cura 2.6." #~ msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6." #~ msgctxt "@label" #~ msgid "Version Upgrade 2.1 to 2.2" #~ msgstr "Versie-upgrade van 2.1 naar 2.2" #~ msgctxt "@info:whatsthis" #~ msgid "Upgrades configurations from Cura 2.1 to Cura 2.2." #~ msgstr "Werkt configuraties bij van Cura 2.1 naar Cura 2.2." #~ msgctxt "@label" #~ msgid "Version Upgrade 2.2 to 2.4" #~ msgstr "Versie-upgrade van 2.2 naar 2.4." #~ msgctxt "@info:whatsthis" #~ msgid "Upgrades configurations from Cura 2.2 to Cura 2.4." #~ msgstr "Werkt configuraties bij van Cura 2.2 naar Cura 2.4." #~ msgctxt "@label" #~ msgid "Image Reader" #~ msgstr "Afbeeldinglezer" #~ msgctxt "@info:whatsthis" #~ msgid "Enables ability to generate printable geometry from 2D image files." #~ msgstr "Maakt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk." #~ msgctxt "@label" #~ msgid "CuraEngine Backend" #~ msgstr "CuraEngine-back-end" #~ msgctxt "@info:whatsthis" #~ msgid "Provides the link to the CuraEngine slicing backend." #~ msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine." #~ msgctxt "@label" #~ msgid "Per Model Settings Tool" #~ msgstr "Gereedschap voor Instellingen per Model" #~ msgctxt "@info:whatsthis" #~ msgid "Provides the Per Model Settings." #~ msgstr "Biedt de Instellingen per Model." #~ msgctxt "@label" #~ msgid "3MF Reader" #~ msgstr "3MF-lezer" #~ msgctxt "@info:whatsthis" #~ msgid "Provides support for reading 3MF files." #~ msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden." #~ msgctxt "@label" #~ msgid "Solid View" #~ msgstr "Solide weergave" #~ msgctxt "@info:whatsthis" #~ msgid "Provides a normal solid mesh view." #~ msgstr "Deze optie biedt een normaal, solide rasteroverzicht." #~ msgctxt "@label" #~ msgid "G-code Reader" #~ msgstr "G-code-lezer" #~ msgctxt "@info:whatsthis" #~ msgid "Allows loading and displaying G-code files." #~ msgstr "Hiermee kunt u G-code-bestanden laden en weergeven." #~ msgctxt "@label" #~ msgid "Cura Profile Writer" #~ msgstr "Cura-profielschrijver" #~ msgctxt "@info:whatsthis" #~ msgid "Provides support for exporting Cura profiles." #~ msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen." #~ msgctxt "@label" #~ msgid "3MF Writer" #~ msgstr "3MF-schrijver" #~ msgctxt "@info:whatsthis" #~ msgid "Provides support for writing 3MF files." #~ msgstr "Deze optie biedt ondersteuning voor het schrijven van 3MF-bestanden." #~ msgctxt "@label" #~ msgid "Ultimaker machine actions" #~ msgstr "Acties Ultimaker-machines" #~ msgctxt "@info:whatsthis" #~ msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc)" #~ msgstr "Biedt machine-acties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades enz.)" #~ msgctxt "@label" #~ msgid "Cura Profile Reader" #~ msgstr "Cura-profiellezer" #~ msgctxt "@info:whatsthis" #~ msgid "Provides support for importing Cura profiles." #~ msgstr "Biedt ondersteuning bij het importeren van Cura-profielen." #~ msgctxt "@info" #~ msgid "%(width).1f x %(depth).1f x %(height).1f mm" #~ msgstr "%(width).1f x %(depth).1f x %(height).1f mm" #~ msgctxt "@label" #~ msgid "Build Plate Shape" #~ msgstr "Vorm van het platform" #~ msgctxt "@option:check" #~ msgid "Machine Center is Zero" #~ msgstr "Midden van Machine is Nul" #~ msgctxt "@option:check" #~ msgid "Heated Bed" #~ msgstr "Verwarmd bed" #~ msgctxt "@label" #~ msgid "GCode Flavor" #~ msgstr "Versie G-code" #~ msgctxt "@label" #~ msgid "Material Diameter" #~ msgstr "Materiaaldiameter" #~ msgctxt "@label" #~ msgid "If your printer is not listed, read the network-printing troubleshooting guide" #~ msgstr "Raadpleeg de handleiding voor probleemoplossing bij printen via het netwerk als uw printer niet in de lijst wordt vermeld" #~ msgctxt "@item:inlistbox" #~ msgid "Ultimaker" #~ msgstr "Ultimaker" #~ msgctxt "@label" #~ msgid "Support library for scientific computing " #~ msgstr "Ondersteuningsbibliotheek voor wetenschappelijke berekeningen " #~ msgctxt "@tooltip" #~ msgid "Print Setup

    Edit or review the settings for the active print job." #~ msgstr "Instelling voor printen

    Bewerk of controleer de instellingen voor de actieve printtaak." #~ msgctxt "@tooltip" #~ msgid "Print Monitor

    Monitor the state of the connected printer and the print job in progress." #~ msgstr "Printbewaking

    Bewaak de status van de aangesloten printer en de printtaak die wordt uitgevoerd." #~ msgctxt "@title:menuitem %1 is the value from the printer" #~ msgid "Automatic: %1" #~ msgstr "Automatisch: %1" #~ msgctxt "@label:PrintjobStatus" #~ msgid "Please load a 3d model" #~ msgstr "Laad een 3D-model" #~ msgctxt "@label" #~ msgid "Print Selected Model with %1" #~ msgid_plural "Print Selected Models With %1" #~ msgstr[0] "Geselecteerd model printen met %1" #~ msgstr[1] "Geselecteerde modellen printen met %1" #~ msgctxt "@info:status" #~ msgid "Unable to start a new print job. No PrinterCore loaded in slot {0}" #~ msgstr "Er kan geen nieuwe taak worden gestart. Er is geen PrintCore geladen in de sleuf {0}." #~ msgctxt "@label" #~ msgid "Version Upgrade 2.4 to 2.5" #~ msgstr "Versie-upgrade van 2.4 naar 2.5." #~ msgctxt "@info:whatsthis" #~ msgid "Upgrades configurations from Cura 2.4 to Cura 2.5." #~ msgstr "Werkt configuraties bij van Cura 2.4 naar Cura 2.5." #~ msgctxt "@info:status" #~ msgid "Unable to find a quality profile for this combination. Default settings will be used instead." #~ msgstr "Kan geen kwaliteitsprofiel vinden voor deze combinatie. In plaats daarvan worden de standaardinstellingen gebruikt." #~ msgctxt "@title:window" #~ msgid "Oops!" #~ msgstr "Oeps!" #~ msgctxt "@label" #~ msgid "" #~ "

    A fatal exception has occurred that we could not recover from!

    \n" #~ "

    We hope this picture of a kitten helps you recover from the shock.

    \n" #~ "

    Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

    \n" #~ " " #~ msgstr "" #~ "

    Er is een fatale fout opgetreden die niet kan worden hersteld!

    \n" #~ "

    Hopelijk komt u met de afbeelding van deze kitten wat bij van de schrik.

    \n" #~ "

    Gebruik de onderstaande informatie om een bugrapport te plaatsen op http://github.com/Ultimaker/Cura/issues

    \n" #~ " " #~ msgctxt "@label" #~ msgid "Please enter the correct settings for your printer below:" #~ msgstr "Voer hieronder de juiste instellingen voor uw printer in:" #~ msgctxt "@label" #~ msgid "Extruder %1" #~ msgstr "Extruder %1" #~ msgctxt "@label Followed by extruder selection drop-down." #~ msgid "Print model with" #~ msgstr "Model printen met" #~ msgctxt "@label" #~ msgid "You will need to restart the application for language changes to have effect." #~ msgstr "U moet de toepassing opnieuw opstarten voordat de taalwijzigingen van kracht worden." #~ msgctxt "@info:tooltip" #~ msgid "Moves the camera so the model is in the center of the view when an model is selected" #~ msgstr "Verplaatst de camera zodanig dat wanneer een model wordt geselecteerd, het model in het midden van het beeld wordt weergegeven" #~ msgctxt "@action:inmenu menubar:edit" #~ msgid "Delete &Selection" #~ msgstr "&Selectie Verwijderen" #~ msgctxt "@action:inmenu menubar:file" #~ msgid "&Open File..." #~ msgstr "Bestand &Openen..." #~ msgctxt "@action:inmenu menubar:file" #~ msgid "&Open Project..." #~ msgstr "Project &openen..." #~ msgctxt "@title:window" #~ msgid "Multiply Model" #~ msgstr "Model verveelvoudigen" #~ msgctxt "@title:menu menubar:file" #~ msgid "Save &All" #~ msgstr "A&lles Opslaan" #~ msgctxt "@title:window" #~ msgid "Open file" #~ msgstr "Bestand openen" #~ msgctxt "@title:window" #~ msgid "Open workspace" #~ msgstr "Werkruimte openen" #~ msgctxt "@label" #~ msgid "Hollow" #~ msgstr "Hol" #~ msgctxt "@label" #~ msgid "No (0%) infill will leave your model hollow at the cost of low strength" #~ msgstr "Zonder vulling (0%) blijft uw model hol, wat ten koste gaat van de sterkte" #~ msgctxt "@label" #~ msgid "Light" #~ msgstr "Licht" #~ msgctxt "@label" #~ msgid "Light (20%) infill will give your model an average strength" #~ msgstr "Met lichte vulling (20%) krijgt uw model een gemiddelde sterkte" #~ msgctxt "@label" #~ msgid "Dense" #~ msgstr "Dicht" #~ msgctxt "@label" #~ msgid "Dense (50%) infill will give your model an above average strength" #~ msgstr "Met een dichte vulling (50%) krijgt uw model een bovengemiddelde sterkte" #~ msgctxt "@label" #~ msgid "Solid" #~ msgstr "Solide" #~ msgctxt "@label" #~ msgid "Solid (100%) infill will make your model completely solid" #~ msgstr "Met solide vulling (100%) is uw model volledig massief" #~ msgctxt "@label" #~ msgid "Enable Support" #~ msgstr "Supportstructuur inschakelen" #~ msgctxt "@label" #~ msgid "Enable support structures. These structures support parts of the model with severe overhangs." #~ msgstr "Schakel het printen van een supportstructuur in. Een supportstructuur ondersteunt delen van het model met een zeer grote overhang." #~ msgctxt "@label" #~ msgid "Need help improving your prints? Read the Ultimaker Troubleshooting Guides" #~ msgstr "Hulp nodig om betere prints te krijgen? Lees de Ultimaker Troubleshooting Guides (handleiding voor probleemoplossing)" #~ msgctxt "@info:status" #~ msgid "Connected over the network to {0}. Please approve the access request on the printer." #~ msgstr "Via het netwerk verbonden met {0}. Keur de toegangsaanvraag goed op de printer." #~ msgctxt "@info:status" #~ msgid "Connected over the network to {0}." #~ msgstr "Via het netwerk verbonden met {0}." #~ msgctxt "@info:status" #~ msgid "Connected over the network to {0}. No access to control the printer." #~ msgstr "Via het netwerk verbonden met {0}. Kan de printer niet beheren." #~ msgctxt "@info:status" #~ msgid "Unable to start a new print job because the printer is busy. Please check the printer." #~ msgstr "Er kan geen nieuwe taak worden gestart omdat de printer bezig is. Controleer de printer." #~ msgctxt "@label" #~ msgid "You made changes to the following setting(s)/override(s):" #~ msgstr "U hebt de volgende instelling(en) gewijzigd of overschrijving(en) gemaakt:" #~ msgctxt "@window:title" #~ msgid "Switched profiles" #~ msgstr "Profielen gewisseld" #~ msgctxt "@label" #~ msgid "Do you want to transfer your %d changed setting(s)/override(s) to this profile?" #~ msgstr "Wilt u de %d gewijzigde instelling(en)/overschrijving(en) overbrengen naar dit profiel?" #~ msgctxt "@label" #~ msgid "If you transfer your settings they will override settings in the profile. If you don't transfer these settings, they will be lost." #~ msgstr "Als u de instellingen overbrengt, zullen deze de instellingen in het profiel overschrijven. Als u deze instellingen niet overbrengt, gaan ze verloren." #~ msgctxt "@label" #~ msgid "Cost per Meter (Approx.)" #~ msgstr "Kostprijs per Meter (Circa)" #~ msgctxt "@label" #~ msgid "%1/m" #~ msgstr "%1/m" #~ msgctxt "@info:tooltip" #~ msgid "Display 5 top layers in layer view or only the top-most layer. Rendering 5 layers takes longer, but may show more information." #~ msgstr "In de laagweergave de 5 bovenste lagen weergeven of alleen de bovenste laag. Het weergeven van 5 lagen kost meer tijd, maar laat mogelijk meer informatie zien." #~ msgctxt "@action:button" #~ msgid "Display five top layers in layer view" #~ msgstr "In laagweergave de vijf bovenste lagen weergeven" #~ msgctxt "@info:tooltip" #~ msgid "Should only the top layers be displayed in layerview?" #~ msgstr "Moeten in de laagweergave alleen de bovenste lagen worden weergegeven?" #~ msgctxt "@option:check" #~ msgid "Only display top layer(s) in layer view" #~ msgstr "In laagweergave alleen bovenste laag (lagen) weergeven" #~ msgctxt "@label" #~ msgid "Opening files" #~ msgstr "Openen van bestanden" #~ msgctxt "@label" #~ msgid "Printer Monitor" #~ msgstr "Printermonitor" #~ msgctxt "@label" #~ msgid "Temperatures" #~ msgstr "Temperaturen" #~ msgctxt "@label:PrintjobStatus" #~ msgid "Preparing to slice..." #~ msgstr "Voorbereiden om te slicen..." #~ msgctxt "@window:title" #~ msgid "Changes on the Printer" #~ msgstr "Wijzigingen aan de Printer" #~ msgctxt "@action:inmenu" #~ msgid "&Duplicate Model" #~ msgstr "Model &Dupliceren" #~ msgctxt "@label" #~ msgid "Helper Parts:" #~ msgstr "Hulponderdelen:" #~ msgctxt "@label" #~ msgid "Enable printing support structures. This will build up supporting structures below the model to prevent the model from sagging or printing in mid air." #~ msgstr "Schakel het printen van een support structure in. Deze optie zorgt ervoor dat onder het model ondersteuning wordt geprint, om te voorkomen dat dit doorzakt of dat er midden in de lucht moet worden geprint." #~ msgctxt "@label" #~ msgid "Don't print support" #~ msgstr "Geen support printen" #~ msgctxt "@label" #~ msgid "Print support using %1" #~ msgstr "Support printen met %1" #~ msgctxt "@label:listbox" #~ msgid "Printer:" #~ msgstr "Printer:" #~ msgctxt "@info:status" #~ msgid "Successfully imported profiles {0}" #~ msgstr "De profielen {0} zijn geïmporteerd" #~ msgctxt "@label" #~ msgid "Scripts" #~ msgstr "Scripts" #~ msgctxt "@label" #~ msgid "Active Scripts" #~ msgstr "Actieve scripts" #~ msgctxt "@label" #~ msgid "Done" #~ msgstr "Gereed" #~ msgctxt "@item:inlistbox" #~ msgid "English" #~ msgstr "Engels" #~ msgctxt "@item:inlistbox" #~ msgid "Finnish" #~ msgstr "Fins" #~ msgctxt "@item:inlistbox" #~ msgid "French" #~ msgstr "Frans" #~ msgctxt "@item:inlistbox" #~ msgid "German" #~ msgstr "Duits" #~ msgctxt "@item:inlistbox" #~ msgid "Italian" #~ msgstr "Italiaans" #~ msgctxt "@item:inlistbox" #~ msgid "Dutch" #~ msgstr "Nederlands" #~ msgctxt "@item:inlistbox" #~ msgid "Spanish" #~ msgstr "Spaans" #~ msgctxt "@label" #~ msgid "Do you want to change the PrintCores and materials in Cura to match your printer?" #~ msgstr "Wilt u de PrintCores en materialen in Cura wijzigen zodat deze overeenkomen met de printer?" #~ msgctxt "@label:" #~ msgid "Print Again" #~ msgstr "Opnieuw Printen"