// Copyright (c) 2022 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.10 import QtQuick.Controls 2.15 import QtQuick.Layouts 1.1 import UM 1.5 as UM import Cura 1.1 as Cura UM.PreferencesPage { //: General configuration page title title: catalog.i18nc("@title:tab", "General") id: generalPreferencesPage width: parent ? parent.width: 0 function setDefaultLanguage(languageCode) { //loops through the languageList and sets the language using the languageCode for(var i = 0; i < languageList.count; i++) { if (languageComboBox.model.get(i).code == languageCode) { languageComboBox.currentIndex = i } } } function setDefaultTheme(defaultThemeCode) { for(var i = 0; i < themeList.count; i++) { if (themeComboBox.model.get(i).code == defaultThemeCode) { themeComboBox.currentIndex = i } } } function setDefaultDiscardOrKeepProfile(code) { for (var i = 0; i < choiceOnProfileOverrideDropDownButton.model.count; i++) { if (choiceOnProfileOverrideDropDownButton.model.get(i).code == code) { choiceOnProfileOverrideDropDownButton.currentIndex = i; break; } } } function setDefaultOpenProjectOption(code) { for (var i = 0; i < choiceOnOpenProjectDropDownButton.model.count; ++i) { if (choiceOnOpenProjectDropDownButton.model.get(i).code == code) { choiceOnOpenProjectDropDownButton.currentIndex = i break; } } } function reset() { UM.Preferences.resetPreference("general/language") var defaultLanguage = UM.Preferences.getValue("general/language") setDefaultLanguage(defaultLanguage) UM.Preferences.resetPreference("general/theme") var defaultTheme = UM.Preferences.getValue("general/theme") setDefaultTheme(defaultTheme) UM.Preferences.resetPreference("cura/single_instance") singleInstanceCheckbox.checked = boolCheck(UM.Preferences.getValue("cura/single_instance")) UM.Preferences.resetPreference("cura/single_instance_clear_before_load") singleInstanceClearBeforeLoadCheckbox.checked = boolCheck(UM.Preferences.getValue("cura/single_instance_clear_before_load")) UM.Preferences.resetPreference("physics/automatic_push_free") pushFreeCheckbox.checked = boolCheck(UM.Preferences.getValue("physics/automatic_push_free")) UM.Preferences.resetPreference("physics/automatic_drop_down") dropDownCheckbox.checked = boolCheck(UM.Preferences.getValue("physics/automatic_drop_down")) UM.Preferences.resetPreference("mesh/scale_to_fit") scaleToFitCheckbox.checked = boolCheck(UM.Preferences.getValue("mesh/scale_to_fit")) UM.Preferences.resetPreference("mesh/scale_tiny_meshes") scaleTinyCheckbox.checked = boolCheck(UM.Preferences.getValue("mesh/scale_tiny_meshes")) UM.Preferences.resetPreference("cura/select_models_on_load") selectModelsOnLoadCheckbox.checked = boolCheck(UM.Preferences.getValue("cura/select_models_on_load")) UM.Preferences.resetPreference("cura/jobname_prefix") prefixJobNameCheckbox.checked = boolCheck(UM.Preferences.getValue("cura/jobname_prefix")) UM.Preferences.resetPreference("view/show_overhang"); showOverhangCheckbox.checked = boolCheck(UM.Preferences.getValue("view/show_overhang")) UM.Preferences.resetPreference("view/show_xray_warning"); showXrayErrorCheckbox.checked = boolCheck(UM.Preferences.getValue("view/show_xray_warning")) UM.Preferences.resetPreference("view/center_on_select"); centerOnSelectCheckbox.checked = boolCheck(UM.Preferences.getValue("view/center_on_select")) UM.Preferences.resetPreference("view/invert_zoom"); invertZoomCheckbox.checked = boolCheck(UM.Preferences.getValue("view/invert_zoom")) UM.Preferences.resetPreference("view/zoom_to_mouse"); zoomToMouseCheckbox.checked = boolCheck(UM.Preferences.getValue("view/zoom_to_mouse")) //UM.Preferences.resetPreference("view/top_layer_count"); //topLayerCountCheckbox.checked = boolCheck(UM.Preferences.getValue("view/top_layer_count")) UM.Preferences.resetPreference("general/restore_window_geometry") restoreWindowPositionCheckbox.checked = boolCheck(UM.Preferences.getValue("general/restore_window_geometry")) UM.Preferences.resetPreference("general/camera_perspective_mode") //var defaultCameraMode = UM.Preferences.getValue("general/camera_perspective_mode") // /setDefaultCameraMode(defaultCameraMode) UM.Preferences.resetPreference("cura/choice_on_profile_override") setDefaultDiscardOrKeepProfile(UM.Preferences.getValue("cura/choice_on_profile_override")) UM.Preferences.resetPreference("cura/choice_on_open_project") setDefaultOpenProjectOption(UM.Preferences.getValue("cura/choice_on_open_project")) UM.Preferences.resetPreference("info/send_slice_info") sendDataCheckbox.checked = boolCheck(UM.Preferences.getValue("info/send_slice_info")) UM.Preferences.resetPreference("info/automatic_update_check") checkUpdatesCheckbox.checked = boolCheck(UM.Preferences.getValue("info/automatic_update_check")) UM.Preferences.resetPreference("info/latest_update_source") UM.Preferences.resetPreference("info/automatic_plugin_update_check") pluginNotificationsUpdateCheckbox.checked = boolCheck(UM.Preferences.getValue("info/automatic_plugin_update_check")) } buttons: [ Cura.SecondaryButton { text: catalog.i18nc("@action:button", "Defaults") onClicked: reset() } ] ScrollView { id: preferencesScrollView width: parent.width height: parent.height ScrollBar.vertical: UM.ScrollBar { id: preferencesScrollBar parent: preferencesScrollView.parent anchors { top: parent.top bottom: parent.bottom right: parent.right } onPositionChanged: { // This removes focus from items when scrolling. // This fixes comboboxes staying open and scrolling container if (!activeFocus) { forceActiveFocus(); } } } Column { UM.I18nCatalog{id: catalog; name: "cura"} width: preferencesScrollView.width - preferencesScrollBar.width UM.Label { font: UM.Theme.getFont("medium_bold") text: catalog.i18nc("@label", "Interface") } GridLayout { id: interfaceGrid columns: 2 width: parent.width UM.Label { id: languageLabel text: "Language*:" //Don't translate this, to make it easier to find the language drop-down if you can't read the current language. } ListModel { id: languageList Component.onCompleted: { append({ text: "English", code: "en_US" }) append({ text: "Čeština", code: "cs_CZ" }) append({ text: "Deutsch", code: "de_DE" }) append({ text: "Español", code: "es_ES" }) append({ text: "Français", code: "fr_FR" }) append({ text: "Italiano", code: "it_IT" }) append({ text: "日本語", code: "ja_JP" }) append({ text: "한국어", code: "ko_KR" }) append({ text: "Nederlands", code: "nl_NL" }) append({ text: "Português do Brasil", code: "pt_BR" }) append({ text: "Português", code: "pt_PT" }) append({ text: "Русский", code: "ru_RU" }) append({ text: "Türkçe", code: "tr_TR" }) append({ text: "简体中文", code: "zh_CN" }) append({ text: "正體字", code: "zh_TW" }) var date_object = new Date(); if (date_object.getUTCMonth() == 8 && date_object.getUTCDate() == 19) //Only add Pirate on the 19th of September. { append({ text: "Pirate", code: "en_7S" }) } // incomplete and/or abandoned append({ text: catalog.i18nc("@heading", "-- incomplete --"), code: "" }) append({ text: "Magyar", code: "hu_HU" }) append({ text: "Suomi", code: "fi_FI" }) append({ text: "Polski", code: "pl_PL" }) } } Cura.ComboBox { id: languageComboBox textRole: "text" model: languageList implicitWidth: UM.Theme.getSize("combobox").width implicitHeight: currencyField.height function setCurrentIndex() { var code = UM.Preferences.getValue("general/language"); for(var i = 0; i < languageList.count; ++i) { if(model.get(i).code == code) { return i } } } currentIndex: setCurrentIndex() onActivated: { if (model.get(index).code != "") { UM.Preferences.setValue("general/language", model.get(index).code); } else { currentIndex = setCurrentIndex(); } } } UM.Label { id: currencyLabel text: catalog.i18nc("@label", "Currency:") } Cura.TextField { id: currencyField selectByMouse: true text: UM.Preferences.getValue("cura/currency") implicitWidth: UM.Theme.getSize("combobox").width onTextChanged: UM.Preferences.setValue("cura/currency", text) } UM.Label { id: themeLabel text: catalog.i18nc("@label: Please keep the asterix, it's to indicate that a restart is needed.", "Theme*:") } ListModel { id: themeList Component.onCompleted: { var themes = UM.Theme.getThemes() for (var i = 0; i < themes.length; i++) { append({ text: themes[i].name.toString(), code: themes[i].id.toString() }); } } } Cura.ComboBox { id: themeComboBox model: themeList textRole: "text" implicitWidth: UM.Theme.getSize("combobox").width implicitHeight: currencyField.height currentIndex: { var code = UM.Preferences.getValue("general/theme"); for(var i = 0; i < themeList.count; ++i) { if(model.get(i).code == code) { return i } } return 0; } onActivated: UM.Preferences.setValue("general/theme", model.get(index).code) } } UM.TooltipArea { width: childrenRect.width; height: childrenRect.height; text: catalog.i18nc("@info:tooltip", "Slice automatically when changing settings.") UM.CheckBox { id: autoSliceCheckbox checked: boolCheck(UM.Preferences.getValue("general/auto_slice")) onClicked: UM.Preferences.setValue("general/auto_slice", checked) text: catalog.i18nc("@option:check", "Slice automatically"); } } UM.Label { id: languageCaption //: Language change warning text: catalog.i18nc("@label", "*You will need to restart the application for these changes to have effect.") wrapMode: Text.WordWrap font.italic: true } Item { //: Spacer height: UM.Theme.getSize("default_margin").height width: UM.Theme.getSize("default_margin").width } UM.Label { font: UM.Theme.getFont("medium_bold") text: catalog.i18nc("@label", "Viewport behavior") } UM.TooltipArea { width: childrenRect.width; height: childrenRect.height; text: catalog.i18nc("@info:tooltip", "Highlight unsupported areas of the model in red. Without support these areas will not print properly.") UM.CheckBox { id: showOverhangCheckbox checked: boolCheck(UM.Preferences.getValue("view/show_overhang")) onClicked: UM.Preferences.setValue("view/show_overhang", checked) text: catalog.i18nc("@option:check", "Display overhang"); } } UM.TooltipArea { width: childrenRect.width; height: childrenRect.height; text: catalog.i18nc("@info:tooltip", "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry.") UM.CheckBox { id: showXrayErrorCheckbox checked: boolCheck(UM.Preferences.getValue("view/show_xray_warning")) onClicked: UM.Preferences.setValue("view/show_xray_warning", checked) text: catalog.i18nc("@option:check", "Display model errors"); } } UM.TooltipArea { width: childrenRect.width; height: childrenRect.height; text: catalog.i18nc("@info:tooltip", "Moves the camera so the model is in the center of the view when a model is selected") UM.CheckBox { id: centerOnSelectCheckbox text: catalog.i18nc("@action:button","Center camera when item is selected"); checked: boolCheck(UM.Preferences.getValue("view/center_on_select")) onClicked: UM.Preferences.setValue("view/center_on_select", checked) } } UM.TooltipArea { width: childrenRect.width; height: childrenRect.height; text: catalog.i18nc("@info:tooltip", "Should the default zoom behavior of cura be inverted?") UM.CheckBox { id: invertZoomCheckbox text: catalog.i18nc("@action:button", "Invert the direction of camera zoom."); checked: boolCheck(UM.Preferences.getValue("view/invert_zoom")) onClicked: { if(!checked && zoomToMouseCheckbox.checked) //Fix for Github issue Ultimaker/Cura#6490: Make sure the camera origin is in front when unchecking. { UM.Controller.setCameraOrigin("home"); } UM.Preferences.setValue("view/invert_zoom", checked); } } } UM.TooltipArea { width: childrenRect.width; height: childrenRect.height; text: zoomToMouseCheckbox.enabled ? catalog.i18nc("@info:tooltip", "Should zooming move in the direction of the mouse?") : catalog.i18nc("@info:tooltip", "Zooming towards the mouse is not supported in the orthographic perspective.") UM.CheckBox { id: zoomToMouseCheckbox text: catalog.i18nc("@action:button", "Zoom toward mouse direction") checked: boolCheck(UM.Preferences.getValue("view/zoom_to_mouse")) && zoomToMouseCheckbox.enabled onClicked: UM.Preferences.setValue("view/zoom_to_mouse", checked) enabled: UM.Preferences.getValue("general/camera_perspective_mode") !== "orthographic" } //Because there is no signal for individual preferences, we need to manually link to the onPreferenceChanged signal. Connections { target: UM.Preferences function onPreferenceChanged(preference) { if(preference != "general/camera_perspective_mode") { return; } zoomToMouseCheckbox.enabled = UM.Preferences.getValue("general/camera_perspective_mode") !== "orthographic"; zoomToMouseCheckbox.checked = boolCheck(UM.Preferences.getValue("view/zoom_to_mouse")) && zoomToMouseCheckbox.enabled; } } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "Should models on the platform be moved so that they no longer intersect?") UM.CheckBox { id: pushFreeCheckbox text: catalog.i18nc("@option:check", "Ensure models are kept apart") checked: boolCheck(UM.Preferences.getValue("physics/automatic_push_free")) onCheckedChanged: UM.Preferences.setValue("physics/automatic_push_free", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "Should models on the platform be moved down to touch the build plate?") UM.CheckBox { id: dropDownCheckbox text: catalog.i18nc("@option:check", "Automatically drop models to the build plate") checked: boolCheck(UM.Preferences.getValue("physics/automatic_drop_down")) onCheckedChanged: UM.Preferences.setValue("physics/automatic_drop_down", checked) } } UM.TooltipArea { width: childrenRect.width; height: childrenRect.height; text: catalog.i18nc("@info:tooltip","Show caution message in g-code reader.") UM.CheckBox { id: gcodeShowCautionCheckbox checked: boolCheck(UM.Preferences.getValue("gcodereader/show_caution")) onClicked: UM.Preferences.setValue("gcodereader/show_caution", checked) text: catalog.i18nc("@option:check","Caution message in g-code reader"); } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "Should layer be forced into compatibility mode?") UM.CheckBox { id: forceLayerViewCompatibilityModeCheckbox text: catalog.i18nc("@option:check", "Force layer view compatibility mode (restart required)") checked: boolCheck(UM.Preferences.getValue("view/force_layer_view_compatibility_mode")) onCheckedChanged: UM.Preferences.setValue("view/force_layer_view_compatibility_mode", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "Should Cura open at the location it was closed?") UM.CheckBox { id: restoreWindowPositionCheckbox text: catalog.i18nc("@option:check", "Restore window position on start") checked: boolCheck(UM.Preferences.getValue("general/restore_window_geometry")) onCheckedChanged: UM.Preferences.setValue("general/restore_window_geometry", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "What type of camera rendering should be used?") Column { spacing: UM.Theme.getSize("narrow_margin").height UM.Label { text: catalog.i18nc("@window:text", "Camera rendering:") } ListModel { id: comboBoxList Component.onCompleted: { append({ text: catalog.i18n("Perspective"), code: "perspective" }) append({ text: catalog.i18n("Orthographic"), code: "orthographic" }) } } Cura.ComboBox { id: cameraComboBox model: comboBoxList textRole: "text" width: UM.Theme.getSize("combobox").width height: UM.Theme.getSize("combobox").height currentIndex: { var code = UM.Preferences.getValue("general/camera_perspective_mode"); for(var i = 0; i < comboBoxList.count; ++i) { if(model.get(i).code == code) { return i } } return 0 } onActivated: UM.Preferences.setValue("general/camera_perspective_mode", model.get(index).code) } } } Item { //: Spacer height: UM.Theme.getSize("default_margin").height width: UM.Theme.getSize("default_margin").height } UM.Label { font: UM.Theme.getFont("medium_bold") text: catalog.i18nc("@label","Opening and saving files") } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip","Should opening files from the desktop or external applications open in the same instance of Cura?") UM.CheckBox { id: singleInstanceCheckbox text: catalog.i18nc("@option:check","Use a single instance of Cura") checked: boolCheck(UM.Preferences.getValue("cura/single_instance")) onCheckedChanged: UM.Preferences.setValue("cura/single_instance", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip","Should the build plate be cleared before loading a new model in the single instance of Cura?") enabled: singleInstanceCheckbox.checked UM.CheckBox { id: singleInstanceClearBeforeLoadCheckbox text: catalog.i18nc("@option:check","Clear buildplate before loading model into the single instance") checked: boolCheck(UM.Preferences.getValue("cura/single_instance_clear_before_load")) onCheckedChanged: UM.Preferences.setValue("cura/single_instance_clear_before_load", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip","Should models be scaled to the build volume if they are too large?") UM.CheckBox { id: scaleToFitCheckbox text: catalog.i18nc("@option:check","Scale large models") checked: boolCheck(UM.Preferences.getValue("mesh/scale_to_fit")) onCheckedChanged: UM.Preferences.setValue("mesh/scale_to_fit", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip","An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?") UM.CheckBox { id: scaleTinyCheckbox text: catalog.i18nc("@option:check","Scale extremely small models") checked: boolCheck(UM.Preferences.getValue("mesh/scale_tiny_meshes")) onCheckedChanged: UM.Preferences.setValue("mesh/scale_tiny_meshes", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip","Should models be selected after they are loaded?") UM.CheckBox { id: selectModelsOnLoadCheckbox text: catalog.i18nc("@option:check","Select models when loaded") checked: boolCheck(UM.Preferences.getValue("cura/select_models_on_load")) onCheckedChanged: UM.Preferences.setValue("cura/select_models_on_load", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "Should a prefix based on the printer name be added to the print job name automatically?") UM.CheckBox { id: prefixJobNameCheckbox text: catalog.i18nc("@option:check", "Add machine prefix to job name") checked: boolCheck(UM.Preferences.getValue("cura/jobname_prefix")) onCheckedChanged: UM.Preferences.setValue("cura/jobname_prefix", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "Should a summary be shown when saving a project file?") UM.CheckBox { text: catalog.i18nc("@option:check", "Show summary dialog when saving project") checked: boolCheck(UM.Preferences.getValue("cura/dialog_on_project_save")) onCheckedChanged: UM.Preferences.setValue("cura/dialog_on_project_save", checked) } } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "Default behavior when opening a project file") Column { spacing: UM.Theme.getSize("narrow_margin").height UM.Label { text: catalog.i18nc("@window:text", "Default behavior when opening a project file: ") } Cura.ComboBox { id: choiceOnOpenProjectDropDownButton width: UM.Theme.getSize("combobox").width height: UM.Theme.getSize("combobox").height model: ListModel { id: openProjectOptionModel Component.onCompleted: { append({ text: catalog.i18nc("@option:openProject", "Always ask me this"), code: "always_ask" }) append({ text: catalog.i18nc("@option:openProject", "Always open as a project"), code: "open_as_project" }) append({ text: catalog.i18nc("@option:openProject", "Always import models"), code: "open_as_model" }) } } textRole: "text" currentIndex: { var index = 0; var currentChoice = UM.Preferences.getValue("cura/choice_on_open_project"); for (var i = 0; i < model.count; ++i) { if (model.get(i).code == currentChoice) { index = i; break; } } return index; } onActivated: UM.Preferences.setValue("cura/choice_on_open_project", model.get(index).code) } } } Item { //: Spacer height: UM.Theme.getSize("default_margin").height width: UM.Theme.getSize("default_margin").width } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip", "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again.") Column { spacing: UM.Theme.getSize("narrow_margin").height UM.Label { font: UM.Theme.getFont("medium_bold") text: catalog.i18nc("@label", "Profiles") } UM.Label { text: catalog.i18nc("@window:text", "Default behavior for changed setting values when switching to a different profile: ") } Cura.ComboBox { id: choiceOnProfileOverrideDropDownButton width: UM.Theme.getSize("combobox_wide").width height: UM.Theme.getSize("combobox_wide").height model: ListModel { id: discardOrKeepProfileListModel Component.onCompleted: { append({ text: catalog.i18nc("@option:discardOrKeep", "Always ask me this"), code: "always_ask" }) append({ text: catalog.i18nc("@option:discardOrKeep", "Always discard changed settings"), code: "always_discard" }) append({ text: catalog.i18nc("@option:discardOrKeep", "Always transfer changed settings to new profile"), code: "always_keep" }) } } textRole: "text" currentIndex: { var index = 0; var code = UM.Preferences.getValue("cura/choice_on_profile_override"); for (var i = 0; i < model.count; ++i) { if (model.get(i).code == code) { index = i; break; } } return index; } onActivated: UM.Preferences.setValue("cura/choice_on_profile_override", model.get(index).code) } } } Item { //: Spacer height: UM.Theme.getSize("default_margin").height width: UM.Theme.getSize("default_margin").height } UM.Label { font: UM.Theme.getFont("medium_bold") text: catalog.i18nc("@label", "Privacy") } UM.TooltipArea { width: childrenRect.width height: visible ? childrenRect.height : 0 text: catalog.i18nc("@info:tooltip", "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored.") UM.CheckBox { id: sendDataCheckbox text: catalog.i18nc("@option:check","Send (anonymous) print information") checked: boolCheck(UM.Preferences.getValue("info/send_slice_info")) onCheckedChanged: UM.Preferences.setValue("info/send_slice_info", checked) } UM.SimpleButton { onClicked: CuraApplication.showMoreInformationDialogForAnonymousDataCollection() iconSource: UM.Theme.getIcon("Information") anchors.left: sendDataCheckbox.right anchors.verticalCenter: sendDataCheckbox.verticalCenter hoverBackgroundColor: UM.Theme.getColor("secondary_button_hover") backgroundRadius: width / 2 height: UM.Theme.getSize("small_button_icon").height color: UM.Theme.getColor("small_button_text") width: height } } Item { //: Spacer height: UM.Theme.getSize("default_margin").height width: UM.Theme.getSize("default_margin").height } UM.Label { font: UM.Theme.getFont("medium_bold") text: catalog.i18nc("@label", "Updates") } UM.TooltipArea { width: childrenRect.width height: visible ? childrenRect.height : 0 text: catalog.i18nc("@info:tooltip", "Should Cura check for updates when the program is started?") UM.CheckBox { id: checkUpdatesCheckbox text: catalog.i18nc("@option:check","Check for updates on start") checked: boolCheck(UM.Preferences.getValue("info/automatic_update_check")) onCheckedChanged: UM.Preferences.setValue("info/automatic_update_check", checked) } } ButtonGroup { id: curaUpdatesGroup buttons: [checkUpdatesOptionBeta, checkUpdatesOptionStable] } UM.TooltipArea { width: childrenRect.width height: visible ? childrenRect.height : 0 text: catalog.i18nc("@info:tooltip", "When checking for updates, only check for stable releases.") anchors.left: parent.left anchors.leftMargin: UM.Theme.getSize("default_margin").width Cura.RadioButton { id: checkUpdatesOptionStable text: catalog.i18nc("@option:radio", "Stable releases only") enabled: checkUpdatesCheckbox.checked checked: UM.Preferences.getValue("info/latest_update_source") == "stable" onClicked: UM.Preferences.setValue("info/latest_update_source", "stable") } } UM.TooltipArea { width: childrenRect.width height: visible ? childrenRect.height : 0 text: catalog.i18nc("@info:tooltip", "When checking for updates, check for both stable and for beta releases.") anchors.left: parent.left anchors.leftMargin: UM.Theme.getSize("default_margin").width Cura.RadioButton { id: checkUpdatesOptionBeta text: catalog.i18nc("@option:radio", "Stable and Beta releases") enabled: checkUpdatesCheckbox.checked checked: UM.Preferences.getValue("info/latest_update_source") == "beta" onClicked: UM.Preferences.setValue("info/latest_update_source", "beta") } } UM.TooltipArea { width: childrenRect.width height: visible ? childrenRect.height : 0 text: catalog.i18nc("@info:tooltip", "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!") UM.CheckBox { id: pluginNotificationsUpdateCheckbox text: catalog.i18nc("@option:check", "Get notifications for plugin updates") checked: boolCheck(UM.Preferences.getValue("info/automatic_plugin_update_check")) onCheckedChanged: UM.Preferences.setValue("info/automatic_plugin_update_check", checked) } } /* Multi-buildplate functionality is disabled because it's broken. See CURA-4975 for the ticket to remove it. Item { //: Spacer height: UM.Theme.getSize("default_margin").height width: UM.Theme.getSize("default_margin").height } Label { font.bold: true text: catalog.i18nc("@label","Experimental") } UM.TooltipArea { width: childrenRect.width height: childrenRect.height text: catalog.i18nc("@info:tooltip","Use multi build plate functionality") CheckBox { id: useMultiBuildPlateCheckbox text: catalog.i18nc("@option:check","Use multi build plate functionality (restart required)") checked: boolCheck(UM.Preferences.getValue("cura/use_multi_build_plate")) onCheckedChanged: UM.Preferences.setValue("cura/use_multi_build_plate", checked) } }*/ Connections { target: UM.Preferences function onPreferenceChanged(preference) { if (preference !== "info/send_slice_info") { return; } sendDataCheckbox.checked = boolCheck(UM.Preferences.getValue("info/send_slice_info")) } } } } }