[general] version = 4 name = Fast definition = ultimaker_s5 [metadata] setting_version = 20 type = quality quality_type = draft weight = -2 material = generic_tpu variant = AA 0.8 [values] brim_width = 8.75 cool_min_layer_time_fan_speed_max = 6 top_skin_expand_distance = =line_width * 2 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cross_3d' machine_nozzle_cool_down_speed = 0.5 machine_nozzle_heat_up_speed = 2.5 material_final_print_temperature = =material_print_temperature material_flow = 105 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature + 19 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 prime_tower_enable = True prime_tower_flow = 100 retract_at_layer_change = False retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 speed_print = 30 speed_topbottom = =math.ceil(speed_print * 25 / 30) speed_wall = =math.ceil(speed_print * 30 / 30) speed_wall_x = =math.ceil(speed_wall * 30 / 30) support_angle = 50 support_bottom_distance = =support_z_distance support_offset = =line_width switch_extruder_prime_speed = 15 switch_extruder_retraction_amount = 20 switch_extruder_retraction_speeds = 45 top_bottom_thickness = 1.2 travel_avoid_distance = 1.5 wall_0_wipe_dist = =line_width * 2