1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
{
"name": "Abax PRi5",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Abax 3D Technologies",
"manufacturer": "Abax 3D Technologies",
"file_formats": "text/x-gcode",
"machine_extruder_trains":
{
"0": "abax_pri5_extruder_0"
}
},
"overrides": {
"machine_start_gcode": {
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z5.0 F200 ;move Z to position 5.0 mm\nG92 E0 ;zero the extruded length\n; -- end of START GCODE --"
},
"machine_end_gcode": {
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nM140 S0 ;set temp of bed to Zero \nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament a bit to release some of the pressure\nG1 F2000 X0 Y300 ;move X to min and Y to max \nG90 ;set to absolute positioning\nM84 ;turn off steppers\n; -- end of END GCODE --"
},
"machine_width": {
"default_value": 310
},
"machine_depth": {
"default_value": 310
},
"machine_height": {
"default_value": 300
},
"machine_heated_bed": {
"default_value": false
},
"machine_center_is_zero": {
"default_value": false
},
"machine_gcode_flavor": {
"default_value": "RepRap"
},
"layer_height": {
"default_value": 0.2
},
"layer_height_0": {
"default_value": 0.2
},
"wall_thickness": {
"value": "1"
},
"top_bottom_thickness": {
"default_value": 1
},
"speed_print": {
"default_value": 40
},
"support_enable": {
"default_value": true
}
}
}
|