1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
{
"version": 2,
"name": "Anycubic 4Max",
"inherits": "fdmprinter",
"metadata":
{
"visible": true,
"author": "Jason Scurtu",
"manufacturer": "Anycubic",
"file_formats": "text/x-gcode",
"platform": "anycubic_4max_platform.3mf",
"has_materials": true,
"quality_definition": "anycubic_4max",
"has_machine_quality": true,
"preferred_quality_type": "normal",
"machine_extruder_trains":
{
"0": "anycubic_4max_extruder_0"
}
},
"overrides":
{
"machine_name": { "default_value": "Anycubic 4Max" },
"machine_heated_bed": { "default_value": true },
"machine_width": { "default_value": 220 },
"machine_height": {"default_value": 300 },
"machine_depth": { "default_value": 220 },
"machine_center_is_zero": { "default_value": false },
"machine_max_feedrate_x": { "default_value": 300 },
"machine_max_feedrate_y": { "default_value": 300 },
"machine_max_feedrate_z": { "default_value": 10 },
"machine_acceleration": { "default_value": 1500 },
"machine_max_acceleration_x": { "default_value": 1500 },
"machine_max_acceleration_y": { "default_value": 1500 },
"machine_max_acceleration_z": { "default_value": 100 },
"machine_max_jerk_xy": { "default_value": 11.0 },
"machine_max_jerk_z": { "default_value": 0.4 },
"machine_max_jerk_e": { "default_value": 11.0 },
"jerk_enabled": { "value": "True" },
"jerk_layer_0": { "value": "jerk_topbottom" },
"jerk_prime_tower": { "value": "math.ceil(jerk_print * 15 / 25)" },
"jerk_print": { "value": "11" },
"jerk_support": { "value": "math.ceil(jerk_print * 15 / 25)" },
"jerk_support_interface": { "value": "jerk_topbottom" },
"jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" },
"jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" },
"jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" },
"gantry_height": { "value": "25.0" },
"skin_overlap": { "value": "10" },
"acceleration_layer_0": { "value": "acceleration_topbottom" },
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
"acceleration_print": { "value": "900" },
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 4000)" },
"acceleration_support_interface": { "value": "acceleration_topbottom" },
"acceleration_topbottom": { "value": "math.ceil(acceleration_print * 1000 / 3000)" },
"acceleration_travel": { "value": "acceleration_print" },
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 3000)" },
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
"speed_layer_0": { "value": "20" },
"speed_print": { "value": "40" },
"speed_support": { "value": "speed_wall_0" },
"speed_support_interface": { "value": "speed_topbottom" },
"speed_topbottom": { "value": "math.ceil(speed_print * 20 / 35)" },
"speed_travel": { "value": "60" },
"speed_wall": { "value": "math.ceil(speed_print * 30 / 35)" },
"speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
"speed_wall_x": { "value": "speed_wall" },
"infill_pattern": {"value": "'zigzag'" },
"infill_before_walls": {"value": false },
"adhesion_type": { "default_value": "skirt" },
"material_bed_temperature": { "maximum_value": "150" },
"material_bed_temperature_layer_0": { "maximum_value": "150" },
"machine_gcode_flavor":{"default_value": "RepRap (Marlin/Sprinter)"},
"machine_start_gcode":{"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\nG5"},
"machine_end_gcode":{"default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"}
}
}
|