1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
|
{
"version": 2,
"name": "Anycubic Vyper",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "ThatGuyZim",
"manufacturer": "Anycubic",
"file_formats": "text/x-gcode",
"platform": "anycubic_vyper_platform.stl",
"machine_extruder_trains": {
"0": "anycubic_vyper_extruder_0"
}
},
"overrides": {
"machine_name": {
"default_value": "Anycubic Vyper"
},
"machine_heated_bed": {
"default_value": true
},
"machine_width": {
"default_value": 250
},
"machine_height": {
"default_value": 265
},
"machine_depth": {
"default_value": 255
},
"machine_center_is_zero": {
"default_value": false
},
"gantry_height": {
"value": "0"
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"machine_start_gcode": {
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nM300 S1318 P266\nG28 Z0 ;move Z to min endstops\nG0 Z0.2\nG92 E0 ;zero the extruded length\nG1 X40 E25 F400 ; Extrude 25mm of filament in a 4cm line. Reduce speed (F) if you have a nozzle smaller than 0.4mm!\nG92 E0 ;zero the extruded length again\nG1 E-1 F500 ; Retract a little\nG1 X80 F4000 ; Quickly wipe away from the filament line\nM117 ; Printing…\nG5"
},
"machine_end_gcode": {
"default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 S1318 P266"
}
}
}
|