1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
{
"name": "BIQU B1 ABL",
"version": 2,
"inherits": "biqu_base",
"metadata": {
"quality_definition": "biqu_base",
"visible": true,
"has_machine_materials": true,
"platform": "BIQU_SSS.stl",
"platform_offset": [
0,
-7.4,
5
]
},
"overrides": {
"coasting_enable": { "value": true },
"retraction_amount": { "value": 7 },
"retraction_speed": { "value": 70 },
"support_enable": { "value": true },
"support_structure": { "value": "'normal'" },
"support_type": { "value": "'buildplate'" },
"support_angle": { "value": 45 },
"support_infill_rate": { "value": 15 },
"infill_overlap_mm": { "value": 0.06 },
"speed_print": { "value": 60 },
"machine_name": { "default_value": "BIQU B1 ABL" },
"machine_width": { "value": 235 },
"machine_depth": { "value": 235 },
"machine_height": { "value": 270 },
"machine_head_with_fans_polygon": { "default_value": [
[-33, 35],
[-33, -23],
[33, -23],
[33, 35]
]
},
"machine_start_gcode": {
"default_value": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM117 Pre-heating the extruder\nM104 S160 ; Set Extruder temperature\nM117 Homing axes\nG28 ; Home all axes\nM117 ABL Probing\nG29\nM117 Getting the extruder up to temp\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0 ; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
},
"gantry_height": { "value": 27.5 }
}
}
|