1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
|
{
"version": 2,
"name": "BQ Witbox",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "BQ",
"manufacturer": "BQ",
"file_formats": "text/x-gcode",
"platform": "bq_witbox_platform.3mf",
"platform_offset": [ 0, -145, -38],
"machine_extruder_trains":
{
"0": "bq_witbox_extruder_0"
},
"firmware_file": "MarlinWitbox.hex"
},
"overrides": {
"machine_name": { "default_value": "BQ Witbox" },
"machine_start_gcode": {
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 X0 Y0 ;move to the X/Y origin (Home)\nG28 Z0 ;move to the Z origin (Home)\nG1 Z15.0 F1200 ;move Z to position 15.0 mm\nG92 E0 ;zero the extruded length\nG1 E20 F200 ;extrude 20mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F7200 ;set feedrate to 120 mm/s\n; -- end of START GCODE --"
},
"machine_end_gcode": {
"default_value": "; -- END GCODE --\nM104 S0 ;set extruder temperature to zero (turned off)\nG91 ;set to relative positioning\nG1 E-20 F300 ;retract the filament a bit to release some of the pressure\nG90 ;set to absolute positioning\nG1 Z200 ;move the platform to the bottom\nG28 X0 Y0 ;move to the X/Y origin (Home)\nM84 ;turn off steppers\n; -- end of END GCODE --"
},
"machine_width": {
"default_value": 297
},
"machine_depth": {
"default_value": 210
},
"machine_height": {
"default_value": 200
},
"machine_heated_bed": {
"default_value": false
},
"machine_center_is_zero": {
"default_value": false
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"layer_height": {
"default_value": 0.2
},
"layer_height_0": {
"default_value": 0.2
},
"wall_thickness": {
"value": "1"
},
"top_bottom_thickness": {
"default_value": 1
},
"speed_print": {
"default_value": 40
},
"support_enable": {
"default_value": true
}
}
}
|
