1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
|
{
"name": "Cocoon Create",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Thushan Fernando",
"manufacturer": "Cocoon Create",
"file_formats": "text/x-gcode",
"preferred_quality_type": "fine",
"has_materials": true,
"platform": "wanhao_200_200_platform.obj",
"platform_texture": "Cocoon-backplate.png",
"machine_extruder_trains": {
"0": "cocoon_create_extruder_0"
},
"platform_offset": [
0,
-28,
0
]
},
"overrides": {
"machine_name": {
"default_value": "Cocoon Create"
},
"machine_width": {
"default_value": 200
},
"machine_height": {
"default_value": 180
},
"machine_depth": {
"default_value": 200
},
"machine_heated_bed": {
"default_value": true
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"machine_start_gcode": {
"default_value": "G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X/Y to min endstops\n G28 Z0 ;move Z to min endstops\n G1 Z15.0 F{speed_travel} ;move the platform down 15mm\n G92 E0 ;zero the extruded length\n G1 F200 E3 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G1 F{speed_travel} \n ;Put printing message on LCD screen\n M117 Printing..."
},
"machine_end_gcode": {
"default_value": "M104 S0 ;extruder heater off \n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning"
},
"material_diameter": {
"default_value": 1.75
},
"layer_height": {
"default_value": 0.10
},
"layer_height_0": {
"default_value": 0.2
},
"wall_thickness": {
"value": "0.8"
},
"top_bottom_thickness": {
"default_value": 0.6
},
"speed_print": {
"default_value": 50
},
"support_enable": {
"default_value": true
},
"retraction_enable": {
"default_value": true
},
"retraction_amount": {
"default_value": 4.5
},
"retraction_speed": {
"default_value": 25
}
}
}
|