1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
|
{
"name": "Creality Ender-6",
"version": 2,
"inherits": "creality_base",
"overrides": {
"machine_name": { "default_value": "Creality Ender-6" },
"machine_start_gcode": { "default_value": "\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
"machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG28 X Y ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
"machine_width": { "default_value": 260 },
"machine_depth": { "default_value": 260 },
"machine_height": { "default_value": 400 },
"z_seam_type": { "value": "'sharpest_corner'"},
"z_seam_corner": { "value": "'z_seam_corner_inner'"},
"infill_sparse_density": { "value": "10"},
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'"},
"infill_overlap":{"value": 10},
"material_print_temperature":{"value": 220},
"material_bed_temperature":{"value": 50},
"retraction_amount":{"value": 10},
"speed_travel": { "value": 80.0 },
"coasting_enable": { "value": true},
"coasting_min_volume": { "value": 0.5},
"machine_head_with_fans_polygon": { "default_value": [
[-26, 34],
[-26, -32],
[32, -32],
[32, 34]
]
},
"gantry_height": { "value": 25 },
"speed_print": { "value": 50.0 },
"speed_wall": { "value": 30.0 }
},
"metadata": {
"quality_definition": "creality_base",
"visible": true
}
}
|
