1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
|
{
"version": 2,
"name": "Fabtotum Personal Fabricator",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Fabtotum",
"manufacturer": "Fabtotum",
"file_formats": "text/x-gcode",
"platform": "fabtotum_platform.3mf",
"has_machine_quality": true,
"has_variants": true,
"variants_name": "Head",
"preferred_variant_name": "Lite 0.4 mm",
"preferred_material": "fabtotum_pla",
"supports_usb_connection": false,
"machine_extruder_trains":
{
"0": "fabtotum_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "FABtotum Personal Fabricator" },
"machine_start_gcode": {
"default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM300 S2 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \n;print"
},
"machine_end_gcode": {
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM300 S2 ;FAB bep bep (end print)"
},
"gantry_height": { "value": "55" },
"machine_width": { "default_value": 214 },
"machine_height": { "default_value": 241.5 },
"machine_depth": { "default_value": 234 },
"machine_center_is_zero": { "default_value": false },
"machine_heated_bed": { "default_value": true },
"machine_head_with_fans_polygon": { "default_value": [[-75, 35], [-75, -18], [18, 35], [18, -18]] },
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
"machine_max_feedrate_x": { "default_value": 250 },
"machine_max_feedrate_y": { "default_value": 250 },
"machine_max_feedrate_z": { "default_value": 15 },
"machine_max_acceleration_x": { "default_value": 10000 },
"machine_max_acceleration_y": { "default_value": 10000 },
"machine_max_acceleration_z": { "default_value": 50 },
"machine_max_acceleration_e": { "default_value": 100 },
"machine_acceleration": { "default_value": 4000 },
"machine_max_jerk_xy": { "default_value": 25.0 },
"machine_max_jerk_z": { "default_value": 0.4 },
"machine_max_jerk_e": { "default_value": 1.0 },
"retraction_hop_enabled": { "default_value": false },
"material_final_print_temperature": { "value": "material_print_temperature - 5" },
"material_initial_print_temperature": { "value": "material_print_temperature" },
"travel_avoid_distance": { "value": 1 },
"speed_travel": { "value": 200 },
"speed_infill": { "value": "round(speed_print * 1.05, 0)" },
"speed_topbottom": { "value": "round(speed_print * 0.95, 0)" },
"speed_wall": { "value": "speed_print" },
"speed_wall_0": { "value": "round(speed_print * 0.9, 0)" },
"speed_wall_x": { "value": "speed_wall" },
"speed_layer_0": { "value": "min(round(speed_print * 0.75, 0), 45.0)" },
"speed_travel_layer_0": { "value": "round(speed_travel * 0.7, 0)" },
"skirt_brim_speed": { "value": "speed_layer_0" },
"skirt_line_count": { "default_value": 3 },
"skirt_brim_minimal_length": { "default_value": 150 },
"infill_sparse_density": { "default_value": 24 },
"top_bottom_thickness": { "default_value": 0.6 },
"support_z_distance": { "default_value": 0.2, "value": "min(2 * layer_height, machine_nozzle_size * 0.75)" },
"support_interface_enable": { "default_value": true }
}
}
|
