1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
|
{
"version": 2,
"name": "Folger Tech FT-5",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Jaime van Kessel & Paul Bussiere",
"manufacturer": "Folger Tech",
"file_formats": "text/x-gcode",
"platform": "FT-5_build_plate.stl",
"machine_extruder_trains":
{
"0": "folgertech_FT-5_extruder_0"
}
},
"overrides": {
"machine_heated_bed": { "default_value": true },
"machine_width": { "default_value": 300 },
"machine_height": { "default_value": 400 },
"machine_depth": { "default_value": 300 },
"gantry_height": { "value": "55" },
"machine_start_gcode": {
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
},
"machine_end_gcode": {
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
}
}
}
|