1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
{
"version": 2,
"name": "HCTECH_HC300-M2H",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "HCTECH",
"manufacturer": "HCTECH",
"file_formats": "text/x-gcode",
"platform": "hctech_hc300-m2h.3mf",
"has_machine_quality": false,
"machine_extruder_trains": {
"0": "hctech_hc300-m2h_extruder_0",
"1": "hctech_hc300-m2h_extruder_1"
}
},
"overrides": {
"machine_head_with_fans_polygon": { "default_value": [
[-61, 86],
[-61, -37],
[85, -37],
[85, 86]
] },
"machine_name": { "default_value": "HCTECH HC300-M2H" },
"machine_extruder_count": { "default_value": 2 },
"machine_heated_bed": { "default_value": true },
"machine_width": { "default_value": 300 },
"machine_depth": { "default_value": 300 },
"machine_height": { "default_value": 300 },
"machine_center_is_zero": { "default_value": false },
"retraction_amount": {
"default_value": 0.3,
"maximum_value_warning": 2.0
},
"adhesion_type": { "default_value": "skirt" },
"retraction_speed": { "default_value": 35},
"travel_avoid_supports": { "value": true },
"travel_retract_before_outer_wall": { "value": true },
"retraction_enable": { "value": true },
"gantry_height": { "value": "55" },
"speed_print": { "default_value": 60.0 } ,
"material_diameter": { "default_value": 1.75 },
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
"machine_start_gcode": { "default_value": "G1 Z2 ;Raise Z\nG28 X Y ;Home XY\nT1 ;switch to right extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG1 E-2 F2700 ;Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean Nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start posotion\nT0 ;switch to left extruder\nG1 X5 Y319 F4000 ;Move to Start Position\nG92 E0 ;Reset Extruder\nG1 E20 F60 ;extrude\nM400 ;Wait move\nG92 E0 ;Reset Extruder\nG4 S15 ;Wait 15s\nG1 E-2 F2700; Retract\nG92 E0 ;Reset Extruder\nG1 X150 F5000 ;Clean Nozzle\nG1 X5 ;Clean nozzle\nG1 X220 ;Repeat\nG1 X5 ;Back to start position\nG28 Z ;home Z\nG29 ;Measure the bed\nM500 ;Store parameters\nG1 X0 Y300 F4000 ;Move to corner" },
"machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 Z1 E-1 F2400 ;Retract and raise Z\nG1 Z2 ;Raise Z\nG90 ;Absolute positioning\nG12 ;clean nozzle\nG1 X5 Y319 ;Return to Start Point\nM106 S0 ;Switch off part cooling fan\nM104 S0 ;turn off temperature\nM140 S0 ;turn off Heated Bed\nM84 X Y E ;Disable all steppers but Z\nM81 ;turn-off power" },
"cool_fan_speed": { "value": 75 },
"cool_fan_enabled": { "value": true },
"line_width": { "value": 0.38 },
"travel_avoid_distance": { "value": 1 },
"infill_before_walls": { "value": false }
}
}
|
