1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
{
"version": 2,
"name": "JGAurora A6",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "CrissR",
"manufacturer": "JGAurora",
"file_formats": "text/x-gcode",
"platform": "jgaurora_a6_platform.stl",
"supports_usb_connection": true,
"supports_network_connection": false,
"has_machine_quality": true,
"quality_definition": "jgaurora_a6",
"has_variants": false,
"preferred_quality_type": "normal",
"machine_extruder_trains":
{
"0": "jgaurora_a6_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "JGAurora A6" },
"machine_heated_bed": { "default_value": true },
"machine_width": { "default_value": 300 },
"machine_height": { "default_value": 200 },
"machine_depth": { "default_value": 200 },
"machine_center_is_zero": { "default_value": false },
"machine_nozzle_size": { "default_value": 0.4 },
"material_diameter": { "default_value": 1.75 },
"layer_height": { "default_value": 0.16 },
"layer_height_0": { "default_value": 0.2 },
"retraction_enable": { "default_value": true },
"retraction_amount": { "default_value": 4 },
"retraction_speed": { "default_value": 45 },
"adhesion_type": { "default_value": "skirt" },
"speed_print": { "default_value": 60},
"gantry_height": { "value": 10 },
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
"machine_start_gcode": {
"default_value": "M190 S{print_bed_temperature} ;bed temperature line\nM109 S{print_temperature} ;temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nF200 E3;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nG1 Z0.0 F{travel_speed}\nM117 Printing... ;LCD Message"
},
"machine_end_gcode": {
"default_value": "M104 S0 ;extruder heater off\nM140 S0;heated bed heater off\nG91;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90;absolute positioning\nM104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X178 Y180 F4200 ; park print head\nM84 ; disable motors"
}
}
}
|
