1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
|
{
"name": "JGAurora JGMaker Magic",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Samuel Pinches",
"manufacturer": "JGAurora",
"file_formats": "text/x-gcode",
"preferred_quality_type": "fast",
"machine_extruder_trains":
{
"0": "jgaurora_jgmaker_magic_extruder_0"
}
},
"overrides": {
"machine_name": {
"default_value": "JGAurora JGMaker Magic"
},
"machine_start_gcode": {
"default_value": "; -- START GCODE --\nG21 ;set units to millimetres\nG90 ;set to absolute positioning\nM106 S0 ;set fan speed to zero (turned off)\nG28 ;home all axis\nM420 S1 ;turn on mesh bed levelling if enabled in firmware\nG92 E0 ;zero the extruded length\nG1 Z1 F1000 ;move up slightly\nG1 X60.0 Z0 E9.0 F1000.0;intro line\nG1 X100.0 E21.5 F1000.0 ;continue line\nG92 E0 ;zero the extruded length again\n; -- end of START GCODE --"
},
"machine_end_gcode": {
"default_value": "; -- END GCODE --\nM104 S0 ;turn off nozzle heater\nM140 S0 ;turn off bed heater\nG91 ;set to relative positioning\nG1 E-10 F300 ;retract the filament slightly\nG90 ;set to absolute positioning\nG28 X0 ;move to the X-axis origin (Home)\nG0 Y280 F600 ;bring the bed to the front for easy print removal\nM84 ;turn off stepper motors\n; -- end of END GCODE --"
},
"machine_width": {
"default_value": 220
},
"machine_height": {
"default_value": 250
},
"machine_depth": {
"default_value": 220
},
"machine_heated_bed": {
"default_value": true
},
"machine_center_is_zero": {
"default_value": false
},
"gantry_height": {
"value": "10"
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"material_diameter": {
"default_value": 1.75
},
"layer_height_0": {
"default_value": 0.2
},
"wall_thickness": {
"default_value": 1.2
},
"speed_print": {
"default_value": 60
},
"support_enable": {
"default_value": true
},
"retraction_enable": {
"default_value": true
},
"retraction_amount": {
"default_value": 5
},
"retraction_speed": {
"default_value": 50
}
}
}
|