1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
{
"version": 2,
"name": "Kossel Pro",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Chris Petersen",
"manufacturer": "Johann",
"file_formats": "text/x-gcode",
"platform": "kossel_pro_build_platform.stl",
"platform_offset": [0, -0.25, 0],
"machine_extruder_trains":
{
"0": "kossel_pro_extruder_0"
}
},
"overrides": {
"machine_heated_bed": {
"default_value": true
},
"machine_width": {
"default_value": 240
},
"machine_height": {
"default_value": 240
},
"machine_depth": {
"default_value": 240
},
"machine_center_is_zero": {
"default_value": true
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"machine_start_gcode": {
"default_value": "; info: M303 E0 S200 C8 ; Pid auto-tune \n\nM140 S{material_bed_temperature}; Start heating up the base\nG28 ; Home to top 3 endstops\n; Autolevel and adjust first layer\n; Adjust this value to fit your own printer! (positive is thicker)\n; This default value is intentionally very high to accommodate the\n; variety of print heads used with this printer. Many of you will\n; need tiny values like Z0 or Z0.1. Use feeler gauges to dial this\n; in as accurately as possible.\nG29 Z10\n\n; Squirt and wipe ;\nM109 S220 ; Wait for the temp to hit 220\nG00 X125 Y-60 Z0.1 ;\nG92 E0 ;\nG01 E25 F100 ; Extrude a little bit to replace oozage from auto levelling\nG01 X90 Y-50 F6000 ;\nG01 Z5 ;\n\n; Set the extruder to the requested print temperature\nM104 S{material_print_temperature}\n"
},
"machine_end_gcode": {
"default_value": "M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG28 ; home all axes\nM84 ; disable motors\n"
},
"machine_shape": {
"default_value": "elliptic"
}
}
}
|