1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
|
{
"id": "kupido",
"name": "Kupido",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Ultimaker",
"manufacturer": "Kupido",
"category": "Other",
"file_formats": "text/x-gcode",
"platform_offset": [ 0, 0, 0]
},
"overrides": {
"machine_name": { "default_value": "Kupido" },
"machine_start_gcode": {
"default_value": " ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n ;M190 S{material_bed_temperature} ;Uncomment to add your own bed temperature line\n ;M109 S{material_print_temperature} ;Uncomment to add your own temperature line\n G21 ;metric values\n G90 ;absolute positioning\n M82 ;set extruder to absolute mode\n M107 ;start with the fan off\n G28 X0 Y0 ;move X Y to endstops\n G28 Z0 ;move Z to endstops\n G1 Z20.0 F40 ;move the platform down 20mm\n G1 Y0 X170 F{speed_travel}\n G92 E0 ;zero the extruded length\n G1 F200 E10 ;extrude 3mm of feed stock\n G92 E0 ;zero the extruded length again\n G4 P7000\n G1 F{speed_travel}\n ;Put printing message on LCD screen\n M117 Printing...\n"
},
"machine_end_gcode": {
"default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
},
"prime_tower_size": { "default_value": 8.660254037844387 },
"retraction_speed": { "default_value": 60 },
"material_bed_temperature": { "default_value": 60 },
"speed_wall_x": { "default_value": 40 },
"skirt_line_count": { "default_value": 2 },
"retraction_min_travel": { "default_value": 2 },
"speed_wall_0": { "default_value": 30 },
"material_print_temperature": { "default_value": 220 },
"brim_line_count": { "default_value": 15 },
"retraction_amount": { "default_value": 3.6 },
"speed_topbottom": { "default_value": 20 },
"layer_height": { "default_value": 0.2 },
"speed_print": { "default_value": 30 },
"speed_infill": { "default_value": 30 }
}
}
|
