1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
|
{
"name": "Lotmaxx Shark",
"version": 2,
"inherits": "fdmprinter",
"overrides": {
"machine_name": { "default_value": "Lotmaxx Shark" },
"machine_width": { "default_value": 235 },
"machine_depth": { "default_value": 235 },
"machine_height": { "default_value": 265 },
"machine_head_with_fans_polygon": { "default_value": [
[-50.7,16.8],
[-50.7,-29.5],
[46.9,-29.5],
[49.9,16.8]
]
},
"gantry_height": { "value": 29 },
"machine_heated_bed": {"value": true},
"machine_start_gcode":{
"default_value":"G28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z4.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"
},
"machine_end_gcode":{
"default_value":"G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n"
},
"acceleration_print":{"value":1000},
"acceleration_travel":{"value":1000},
"acceleration_travel_layer_0":{"value":1000.0},
"expand_skins_expand_distance":{"value":0.8},
"fill_outline_gaps":{"default_value":false},
"infill_sparse_density":{"value":15},
"meshfix_maximum_resolution":{"value":0.25},
"optimize_wall_printing_order":{"value":true},
"retract_at_layer_change":{"value":false},
"retraction_amount":{"value":4.5},
"roofing_layer_count":{"value":1},
"skin_preshrink":{"value":0.8},
"speed_layer_0":{"value":30},
"speed_print":{"value":45},
"speed_roofing":{"value":35},
"speed_topbottom":{"value":35},
"speed_travel":{"value":80},
"speed_wall_0":{"value":32},
"speed_wall_x":{"value":32},
"support_infill_rate":{"value":5},
"support_pattern":{"default_value":"lines"},
"support_use_towers":{"value":false},
"wall_overhang_speed_factor":{"value":50},
"z_seam_corner":{"default_value":"z_seam_corner_any"},
"z_seam_relative":{"value":true},
"z_seam_type":{"default_value":"sharpest_corner"},
"zig_zaggify_infill":{"value":true},
"adhesion_type":{"default_value":"skirt"},
"prime_tower_enable":{"value":true},
"prime_tower_position_x":{"value": 50},
"prime_tower_position_y":{"value": 50},
"prime_tower_min_volume":{"value": 30},
"switch_extruder_retraction_amount": {"value": 100},
"switch_extruder_retraction_speeds": {"value": 60}
},
"metadata": {
"visible": true,
"author": "lotmaxx.com",
"manufacturer": "Lotmaxx",
"platform": "lotmaxx_sc_10_20_platform.3mf",
"machine_extruder_trains": {
"0": "lotmaxx_sc60_extruder_left",
"1": "lotmaxx_sc60_extruder_right"
},
"has_materials": true,
"preferred_quality_type": "normal"
}
}
|
