1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
{
"name": "MBot3D Grid 2+ Dual",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Magicfirm",
"manufacturer": "Magicfirm",
"file_formats": "application/x3g",
"machine_x3g_variant": "z",
"machine_extruder_trains":
{
"0": "mbot3d_grid2_extruder_left",
"1": "mbot3d_grid2_extruder_right"
}
},
"overrides": {
"machine_name": { "default_value": "MBot3D Grid 2+ Dual" },
"machine_start_gcode": {
"default_value": "M136\nG162 X Y F2000\nG161 Z F900\nG92 X0 Y0 Z-5 A0 B0\nG1 Z0.0 F900\nG161 Z F100\nM132 X Y Z A B\nG1 X125 Y115 Z10 F450\nG1 X0 Y115 Z10 F2000.0\nM133 T0\nG1 X20 Y115 Z0.5 F800\nG1 X0 Y115 Z0.5 F600 A12\nG92 A0\n"
},
"machine_end_gcode": {
"default_value": "M18 A B(Turn off A and B steppers)\nG1 Z190 F900\nG162 X Y F2000\nM18 X Y Z(Turn off steppers after a build)\nM104 S0 T0\nM72 P1 ( Play Ta-Da song )\nM73 P100 (end build progress )\nM137 (build end)\n"
},
"machine_width": { "default_value": 235 },
"machine_depth": { "default_value": 210 },
"machine_height": { "default_value": 190 },
"machine_extruder_count": { "default_value": 2 },
"machine_center_is_zero": { "default_value": true },
"machine_gcode_flavor": { "default_value": "Makerbot" },
"machine_head_with_fans_polygon": { "default_value": [ [ -37, 50 ], [ 25, 50 ], [ 25, -40 ], [ -37, -40 ] ] },
"gantry_height": { "value": 10 },
"machine_steps_per_mm_x": { "default_value": 88.888889 },
"machine_steps_per_mm_y": { "default_value": 88.888889 },
"machine_steps_per_mm_z": { "default_value": 400 },
"machine_steps_per_mm_e": { "default_value": 96.27520187033366 },
"retraction_amount": { "default_value": 0.7 },
"retraction_speed": { "default_value": 15 },
"speed_print": { "default_value": 50 },
"speed_wall": { "value": 25 },
"speed_wall_x": { "value": 35 },
"speed_travel": { "value": 80 },
"speed_layer_0": { "value": 15 },
"support_interface_enable": { "default_value": true },
"support_interface_height": { "default_value": 0.8 },
"support_interface_density": { "default_value": 80 },
"support_interface_pattern": { "default_value": "grid" },
"infill_overlap": { "value": "12 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0" },
"retract_at_layer_change": { "default_value": true },
"travel_retract_before_outer_wall": { "default_value": true },
"material_initial_print_temperature": { "value": "material_print_temperature" },
"material_final_print_temperature": { "value": "material_print_temperature" },
"travel_avoid_other_parts": { "default_value": false },
"raft_airgap": { "default_value": 0.15 },
"raft_margin": { "default_value": 6 }
}
}
|
