1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
|
{
"name": "Mendel90",
"version": 2,
"inherits": "fdmprinter",
"metadata":
{
"visible": true,
"author": "Wilmer Gaona",
"manufacturer": "Nophead",
"file_formats": "text/x-gcode",
"platform": "mendel90_platform.stl",
"platform_offset": [0, -23.6, 0],
"machine_extruder_trains":
{
"0": "mendel90_extruder_0"
}
},
"pages": [
"BedLeveling"
],
"overrides": {
"machine_name": { "default_value": "Mendel90" },
"machine_start_gcode": {
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;absolute extrusion\nM107 ;start with the fan off\nG28 ;home\nG92 E0 ;zero the extruded length\nM140 S{material_bed_temperature_layer_0} ; set the bed temperature and continue on\nG1 X-50 Y98 F9000 ;go to the left of the top\nG1 Z0.05 ; close to the bed\nM104 S{material_print_temperature_layer_0}; pre-heat the extruder continue on\nM190 S{material_bed_temperature_layer_0} ;set the bed temp & wait\nM109 S{material_print_temperature_layer_0};set the extruder temp for layer 0 & wait\nG92 E0 ;zero the extruded length\nG1 X50 E10 F300 ; make a thick line to prime extruder\nG92 E0 ; reset extruder\nG1 E-4 F1800\nG1 Z0.3 ;lift Z\n"
},
"machine_end_gcode": {
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nM107 ;carriage fan off\nG91 ;relative positioning\nG1 Z10 ;Move up Z 10mm\nG90 ;back to absolute mode\nG1 E-1 F1200 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG92 E0 ;zero the extruded length\nG1 Z200 X-100 F9000 ; go to top\nG1 Y100 F5000 ;Move Y to back\nM42 P42 S255 ;Turn on Bed cooling fan on\nG4 S10 ;Wait 10 seconds\nM42 P42 S0 ;Turn off bed cooling fan\nM84 ;steppers off\n"
},
"material_bed_temp_wait": {
"default_value": true
},
"material_print_temp_prepend": {
"default_value": true
},
"machine_width": {
"default_value": 200
},
"machine_height": {
"default_value": 200
},
"machine_depth": {
"default_value": 200
},
"machine_heated_bed": {
"default_value": true
},
"machine_center_is_zero": {
"default_value": true
},
"machine_extruder_count": {
"default_value": 1
},
"machine_nozzle_tip_outer_diameter": {
"default_value": 1
},
"machine_nozzle_head_distance": {
"default_value": 5
},
"machine_heat_zone_length": {
"default_value": 16
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"gantry_height": {
"value": "55"
},
"machine_head_with_fans_polygon":
{
"default_value": [
[ -12, 9 ],
[ -12, -9 ],
[ 14, 9 ],
[ 14, -9 ]
]
}
}
}
|