1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
|
{
"version": 2,
"name": "Printrbot Play",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Chris Pearson",
"manufacturer": "Printrbot",
"file_formats": "text/x-gcode",
"platform": "printrbot_play.stl",
"machine_extruder_trains":
{
"0": "printrbot_play_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "Printrbot Play" },
"machine_heated_bed": { "default_value": false },
"machine_width": { "default_value": 100 },
"machine_depth": { "default_value": 100 },
"machine_height": { "default_value": 130 },
"machine_center_is_zero": { "default_value": false },
"layer_height": { "default_value": 0.2 },
"layer_height_0": { "default_value": 0.3 },
"retraction_amount": { "default_value": 0.7 },
"retraction_speed": { "default_value": 45},
"adhesion_type": { "default_value": "skirt" },
"machine_head_with_fans_polygon": { "default_value": [[-32,999],[37,999],[37,-32],[-32,-32]] },
"gantry_height": { "default_value": 55 },
"speed_print": { "default_value": 50 },
"speed_travel": { "default_value": 55 },
"machine_max_feedrate_x": {"default_value": 125},
"machine_max_feedrate_y": {"default_value": 125},
"machine_max_feedrate_z": { "default_value": 5 },
"machine_max_acceleration_x": { "default_value": 2000 },
"machine_max_acceleration_y": { "default_value": 2000 },
"machine_max_acceleration_z": { "default_value": 30 },
"machine_max_acceleration_e": { "default_value": 10000 },
"machine_max_jerk_xy": { "default_value": 20 },
"machine_max_jerk_z": { "default_value": 0.4 },
"machine_max_jerk_e": { "default_value": 5.0 },
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
"machine_start_gcode": {
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM106 ;start with the fan on for filament cooling\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG29 ;run auto bed leveling\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
},
"machine_end_gcode": {
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
}
}
}
|