1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
{
"version": 2,
"name": "RigidBot",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "RBC",
"manufacturer": "RigidBot",
"file_formats": "text/x-gcode",
"platform": "rigidbot_platform.3mf",
"machine_extruder_trains":
{
"0": "rigidbot_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "RigidBot" },
"machine_width": {
"default_value": 254
},
"machine_depth": {
"default_value": 254
},
"machine_height": {
"default_value": 254
},
"machine_heated_bed": {
"default_value": true
},
"gantry_height": {
"value": "0"
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"machine_start_gcode": {
"default_value": ";Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nM205 X8 ;X/Y Jerk settings\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E7 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\n;Put printing message on LCD screen\nM117 Rigibot Printing..."
},
"machine_end_gcode": {
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+10 E-1 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG1 Y230 F3000 ;move Y so the head is out of the way and Plate is moved forward\nM84 ;steppers off\nG90 ;absolute positioning"
},
"layer_height": {
"default_value": 0.2
},
"wall_thickness": {
"value": "0.8"
},
"top_bottom_thickness": {
"default_value": 0.3
},
"speed_print": {
"default_value": 60
},
"speed_layer_0": {
"minimum_value": "0.1"
},
"cool_fan_enabled": {
"default_value": false
},
"skirt_line_count": {
"default_value": 3
},
"skirt_gap": {
"default_value": 4
},
"skirt_brim_minimal_length": {
"default_value": 200
}
}
}
|
