1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
{
"name": "Robo 3D R1",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"manufacturer": "Robo 3D",
"file_formats": "text/x-gcode",
"platform_offset": [ 0, 0, 0],
"machine_extruder_trains":
{
"0": "robo_3d_r1_extruder_0"
}
},
"overrides": {
"machine_start_gcode": {
"default_value": " G92 E0 ;\n M565 Z-1 ;\n G1 Z5 F5000 ;\n G29 ;\n"
},
"machine_end_gcode": {
"default_value": " M104 S0 ;extruder heater off\n M140 S0 ;heated bed heater off (if you have it)\n G91 ;relative positioning\n G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n G1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\n G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\n M84 ;steppers off\n G90 ;absolute positioning\n"
},
"cool_min_layer_time": { "default_value": 7 },
"retraction_speed": { "default_value": 50 },
"cool_min_speed": { "default_value": 19 },
"support_angle": { "default_value": 50 },
"prime_tower_size": { "default_value": 8.660254037844387 },
"support_enable": { "default_value": true },
"raft_airgap": { "default_value": 0.2 },
"layer_height_0": { "default_value": 0.15 },
"material_flow": { "default_value": 100 },
"infill_sparse_density": { "default_value": 10 },
"wall_thickness": { "value": "1.2" },
"retraction_amount": { "default_value": 3 },
"layer_height": { "default_value": 0.2 },
"speed_print": { "default_value": 40 },
"machine_extruder_count": { "default_value": 1 },
"retraction_combing": { "value": "'off'" },
"machine_heated_bed": { "default_value": true },
"machine_center_is_zero": { "default_value": false },
"machine_height": { "default_value": 210 },
"adhesion_type": { "default_value": "raft" },
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
"machine_depth": { "default_value": 245 },
"machine_width": { "default_value": 225 },
"support_z_distance": { "default_value": 0.22 },
"machine_name": { "default_value": "ROBO 3D R1" }
}
}
|
