1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
{
"version": 2,
"name": "SyndaverAXI",
"inherits": "fdmprinter",
"metadata":
{
"type": "machine",
"visible": true,
"author": "Syndaver3D",
"manufacturer": "Syndaver3D",
"file_formats": "text/x-gcode",
"supports_usb_connection": true,
"preferred_quality_type": "draft",
"machine_extruder_trains":
{
"0": "syndaveraxi_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "AXI" },
"machine_shape": { "default_value": "rectangular"},
"machine_heated_bed": { "default_value": true },
"machine_width": { "default_value": 280 },
"machine_depth": { "default_value": 280 },
"machine_height": { "default_value": 285 },
"machine_center_is_zero": { "default_value": false },
"machine_head_with_fans_polygon": {
"default_value": [
[ 0, 0 ],
[ 0, 0 ],
[ 0, 0 ],
[ 0, 0 ]
]
},
"gantry_height": { "value": "286" },
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
"machine_start_gcode": {
"default_value": ";This G-Code has been generated specifically for Syndaver AXI with Hemera toolhead\nM73 P0 ; clear LCD progress bar\nM75 ; Start LCD Print Timer\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{material_bed_temperature_layer_0} ; start bed heating up\nM104 S170 ; start nozzle heating up\nG28 ; home all axes\nM117 AXI Heating Up...\nG1 X-17.5 Y100 Z10 F3000 ; move to wipe position\nG29 L1 ; load leveling matrix slot 1\nG29 A ; ensure mesh is enabled\nM109 R170 ; wait for nozzle to reach wiping temp\nG1 E-3 ; retract material before wipe\nM117 AXI Wiping Nozzle...\nG1 Z-3 ; lower nozzle\nG1 Y90 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y80 F1000 ; slow wipe\nG1 Y65 F1000 ; slow wipe\nG1 Y55 F1000 ; slow wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Y30 F3000 ; fast wipe\nG1 Y55 F3000 ; fast wipe\nG1 Z10 ; raise nozzle\nM117 Heating...\nM190 R{material_bed_temperature_layer_0} ; wait for bed to reach printing temp\nM104 S{material_print_temperature_layer_0} ; set extruder to reach initial printing temp, held back for ooze reasons\nM117 Probe Z at Temp\nG28 Z ; re-probe Z0 to account for any thermal expansion in the bed\nG1 X-17.5 Y80 Z10 F3000 ; move back to wiper\nM117 Heating...\nM109 R{material_print_temperature_layer_0} ; wait for extruder to reach initial printing temp\nM117 AXI Wiping Nozzle...\nG1 E0 ; prime material in nozzle\nG1 Z-3 ; final ooze wipe\nG1 Y60 F2000 ; final ooze wipe\nG1 Y20 F2000 ; final ooze wipe\nM117 AXI Starting Print\nG1 Z2 ; move nozzle back up to not run into things on print start\nM400 ; wait for moves to finish\nM117 AXI Printing"
},
"machine_end_gcode": {
"default_value": "M400 ; wait for moves to finish\nM140 S50 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nM117 Cooling please wait\nG91 ; relative positioning\nG1 Z5 F3000 ; move Z up 5mm so it wont drag on the print\nG90 ; absolute positioning\nG1 X5 Y5 F3000 ; move to cooling position\nM190 R50 ; wait for bed to cool down to removal temp\nG1 X145 Y260 F1000 ; present finished print\nM140 S0 ; cool down bed\nM77 ; End LCD Print Timer\nM18 X Y E ; turn off x y and e axis\nM117 Print Complete."
}
}
}
|
