1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
{
"version": 2,
"name": "Series 1 2014",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "typeamachines",
"manufacturer": "typeamachines",
"file_formats": "text/x-gcode",
"platform": "tam_series1.3mf",
"platform_offset": [-580.0, -6.23, 253.5],
"has_materials": false,
"machine_extruder_trains":
{
"0": "tam_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "TypeAMachines" },
"layer_height": { "default_value": 0.2 },
"layer_height_0": { "default_value": 0.3 },
"infill_sparse_density": { "default_value": 5 },
"wall_thickness": { "value": "1" },
"top_bottom_thickness": { "default_value": 1 },
"infill_pattern": { "value": "'tetrahedral'" },
"machine_width": { "default_value": 305 },
"machine_depth": { "default_value": 305 },
"machine_height": { "default_value": 305 },
"machine_heated_bed": { "default_value": true },
"machine_head_with_fans_polygon": { "default_value": [ [ -35, 65 ], [ -35, -55 ], [ 55, 65 ], [ 55, -55 ] ] },
"gantry_height": { "value": "35" },
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
"machine_center_is_zero": { "default_value": false },
"speed_print": { "default_value": 60 },
"retraction_amount": { "default_value": 0.4 },
"retraction_speed": { "default_value": 35},
"xy_offset": { "default_value": -0.01 },
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
"machine_nozzle_tip_outer_diameter": { "default_value": 1 },
"machine_nozzle_head_distance": { "default_value": 3 },
"machine_max_acceleration_x": { "default_value": 6000 },
"machine_max_acceleration_y": { "default_value": 6000 },
"machine_max_acceleration_z": { "default_value": 12000 },
"machine_max_acceleration_e": { "default_value": 175 },
"machine_start_gcode": {
"default_value": ";-- START GCODE --\n;Sliced for Type A Machines Series 1\n;Sliced at: {day} {date} {time}\n;Basic settings:\n;Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {fill_distance}\n;Print Speed: {print_speed}\n;Support: {support}\n;Retraction Speed: {retraction_speed}\n;Retraction Distance: {retraction_amount}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Settings based on: {material_profile}\nG21 ;metric values\nG90 ;absolute positioning\nG28 ;move to endstops\nG29 ;allows for auto-levelling\nG1 Z15.0 F12000 ;move the platform down 15mm\nG1 X150 Y5 F9000 ;center\nM140 S{material_bed_temperature} ;Prep Heat Bed\nM109 S{default_material_print_temperature} ;Heat To temp\nM190 S{material_bed_temperature} ;Heat Bed to temp\nG1 X150 Y5 Z0.3 ;move the platform to purge extrusion\nG92 E0 ;zero the extruded length\nG1 F200 X250 E30 ;extrude 30mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 X150 Y150 Z25 F12000 ;recenter and begin\nG1 F9000"
},
"machine_end_gcode": {
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
}
}
}
|