1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
|
{
"version": 2,
"name": "TinyBoy Fabrikator Mini 1.5",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Reiner Buehl",
"manufacturer": "TinyBoy",
"file_formats": "text/x-gcode",
"platform": "tinyboy_fabrikator15.stl",
"platform_offset": [-95, -3, -46],
"has_materials": true,
"preferred_material": "generic_pla_175",
"has_machine_quality": true,
"preferred_quality_type": "normal",
"machine_extruder_trains":
{
"0": "tinyboy_fabrikator15_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "Fabrikator Mini 1.5" },
"machine_width": { "default_value": 80 },
"machine_depth": { "default_value": 80 },
"machine_height": { "default_value": 80 },
"machine_head_with_fans_polygon": { "default_value": [
[-10, 35],
[-10, -18],
[28, -18],
[28, 35]
]
},
"gantry_height": { "value": 45 },
"machine_center_is_zero": { "default_value": false },
"machine_start_gcode": {
"default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {infill_sparse_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 X0.0 Y0.0 Z15.0 F6000 ;move the printhead up 15mm\nG92 E0 ;zero the extruded length\nM104 S{material_print_temperature} ;set extruder temperature\nM105\nM109 S{material_print_temperature} ;wait for extruder temperature\nG1 F200 E30 ;extrude 30mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F6000\n;Put printing message on LCD screen\nM117 Printing..."
},
"machine_end_gcode": {
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F6000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\n;{jobname}"
}
}
}
|
