1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
{
"version": 2,
"name": "Ultimaker Original",
"inherits": "ultimaker",
"metadata": {
"visible": true,
"author": "Ultimaker",
"manufacturer": "Ultimaker B.V.",
"weight": 4,
"file_formats": "text/x-gcode",
"platform": "ultimaker_platform.3mf",
"has_materials": true,
"has_machine_quality": true,
"exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent", "ultimaker_petg_red" ],
"first_start_actions": ["UMOUpgradeSelection", "BedLevel"],
"supported_actions": ["UMOUpgradeSelection", "BedLevel"],
"machine_extruder_trains":
{
"0": "ultimaker_original_extruder_0"
},
"firmware_file": "MarlinUltimaker-{baudrate}.hex",
"firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}.hex"
},
"overrides": {
"machine_name": { "default_value": "Ultimaker Original" },
"machine_width": {
"default_value": 205
},
"machine_height": {
"default_value": 200
},
"machine_depth": {
"default_value": 205
},
"machine_center_is_zero": {
"default_value": false
},
"machine_head_with_fans_polygon":
{
"default_value": [
[ -75, 35 ],
[ -75, -18 ],
[ 18, 35 ],
[ 18, -18 ]
]
},
"gantry_height": {
"value": "55"
},
"machine_use_extruder_offset_to_offset_coords": {
"default_value": true
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"machine_start_gcode": {
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y50 F9000\n;Put printing message on LCD screen\nM117 Printing..."
},
"machine_end_gcode": {
"value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'"
},
"infill_before_walls": {
"value": "False"
}
}
}
|
