path: root/resources/locale/fr/LC_MESSAGES/Cura.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) 2013
# This file is distributed under the same license as the Cura package.
# Ilya Kulakov <kulakov.ilya@gmail.com>, 2013.
#
msgid ""
msgstr ""
"Project-Id-Version: Cura\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2014-03-17 10:38+0100\n"
"PO-Revision-Date: 2013-10-03 08:10+0100\n"
"Last-Translator: \n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.5.7\n"

#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:563
msgid "A new version of Cura is available, would you like to download?"
msgstr ""
"Une nouvelle version de Cura est disponible, voulez-vous la télécharger?"

#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:563
msgid "New version available"
msgstr "Nouvelle version disponible"

#: Cura/gui/configWizard.py:223
msgid "Add new machine wizard"
msgstr "Lancer l'assistant pour une nouvelle machine"

#: Cura/gui/configWizard.py:225
msgid "First time run wizard"
msgstr "Relancer l'assistant initial"

#: Cura/gui/configWizard.py:226
msgid "Welcome, and thanks for trying Cura!"
msgstr "Bienvenue et merci d'essayer Cura!"

#: Cura/gui/configWizard.py:228
#, fuzzy
msgid "This wizard will help you in setting up Cura for your machine."
msgstr "Cet assistant va vous aider avec les étapes suivantes:"

#: Cura/gui/configWizard.py:245
msgid "The following pre-defined machine profiles are available"
msgstr ""

#: Cura/gui/configWizard.py:246
msgid ""
"Note that these profiles are not guaranteed to give good results,\n"
"or work at all. Extra tweaks might be required.\n"
"If you find issues with the predefined profiles,\n"
"or want an extra profile.\n"
"Please report it at the github issue tracker."
msgstr ""

#: Cura/gui/configWizard.py:276
#, fuzzy
msgid "Cura is now ready to be used!"
msgstr "Cura est désormais autorisé à partager sur YouMagine."

#: Cura/gui/configWizard.py:281
#, fuzzy
msgid ""
"RepRap machines can be vastly different, so here you can set your own "
"settings."
msgstr ""
"Les machines RepRap diffèrent beaucoup, et il n'y a pas\n"
"de configuration par défaut dans Cura pour chacune d'elle."

#: Cura/gui/configWizard.py:282
msgid ""
"Be sure to review the default profile before running it on your machine."
msgstr ""

#: Cura/gui/configWizard.py:283
msgid ""
"If you like a default profile for your machine added,\n"
"then make an issue on github."
msgstr ""
"Si vous souhaitez ajouter un profil par défaut pour\n"
"votre machine, faites une demande sur github. "

#: Cura/gui/configWizard.py:285
msgid "You will have to manually install Marlin or Sprinter firmware."
msgstr "Vous devrez instaler manuellement le micrologiciel Marlin ou Sprinter"

#: Cura/gui/configWizard.py:287
msgid "Machine name"
msgstr "Nom de la machine"

#: Cura/gui/configWizard.py:288
msgid "Machine width (mm)"
msgstr "Largeur de la machine (mm)"

#: Cura/gui/configWizard.py:289
msgid "Machine depth (mm)"
msgstr "Profondeur de la machine (mm)"

#: Cura/gui/configWizard.py:290
msgid "Machine height (mm)"
msgstr "Hauteur de la machine (mm)"

#: Cura/gui/configWizard.py:291 Cura/util/profile.py:175
msgid "Nozzle size (mm)"
msgstr "Diamètre de la buse (mm)"

#: Cura/gui/configWizard.py:292 Cura/util/profile.py:383
msgid "Heated bed"
msgstr "Lit chauffant"

#: Cura/gui/configWizard.py:293
msgid "Bed center is 0,0,0 (RoStock)"
msgstr "Le centre du lit est 0,0,0 (RoStock)"

#: Cura/gui/configWizard.py:313
msgid "Select your machine"
msgstr "Sélectionnez votre machine"

#: Cura/gui/configWizard.py:314
msgid "What kind of machine do you have:"
msgstr "Quel type de machine avez-vous:"

#: Cura/gui/configWizard.py:321
#, fuzzy
msgid "Other (Ex: RepRap, MakerBot)"
msgstr "Autre (ex. RepRap)"

#: Cura/gui/configWizard.py:324
msgid ""
"The collection of anonymous usage information helps with the continued "
"improvement of Cura."
msgstr ""
"La collectce d'information d'usage est anonyme; elle permet d'améliorer Cura "
"sans cesse."

#: Cura/gui/configWizard.py:325
msgid ""
"This does NOT submit your models online nor gathers any privacy related "
"information."
msgstr ""
"Ceci ne soummet PAS vos modèles en lignes ni ne récupère d'information "
"d'ordre privée."

#: Cura/gui/configWizard.py:326
msgid "Submit anonymous usage information:"
msgstr "Soummettre des informations d'usage anonymes:"

#: Cura/gui/configWizard.py:327
msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
msgstr "Pour plus de détail voyez: http://wiki.ultimaker.com/Cura:stats"

#: Cura/gui/configWizard.py:396
msgid "Select upgraded parts you have"
msgstr "Choisissez les éléments mis à jour que vous avez"

#: Cura/gui/configWizard.py:397
msgid ""
"To assist you in having better default settings for your Ultimaker\n"
"Cura would like to know which upgrades you have in your machine."
msgstr ""
"Pour vous aider à avoir de meilleurs réglages par défault pour votre\n"
"Ultimaker, Cura a besoin d'en connaître les mises à jours effectuées."

#: Cura/gui/configWizard.py:399
msgid "Extruder drive upgrade"
msgstr "Extrudeur mis à jour"

#: Cura/gui/configWizard.py:400
msgid "Heated printer bed (self built)"
msgstr "Lit chauffant (fait maison)"

#: Cura/gui/configWizard.py:401
msgid "Dual extrusion (experimental)"
msgstr "Double extrusion (expérimental) "

#: Cura/gui/configWizard.py:403
msgid ""
"If you have an Ultimaker bought after october 2012 you will have the\n"
"Extruder drive upgrade. If you do not have this upgrade,\n"
"it is highly recommended to improve reliability."
msgstr ""
"Si vous avez acheté votre Ultimaker après Octobre 2012, vous avez\n"
"l'extrudeur mis à jour. Si vous ne l'avez pas, il est fortement\n"
"recommandé."

#: Cura/gui/configWizard.py:404
msgid ""
"This upgrade can be bought from the Ultimaker webshop\n"
"or found on thingiverse as thing:26094"
msgstr ""
"Cette mise à jour peut être achetée dans le magasin\n"
"Ultimaker, ou trouvée sur thingiverse (ref. thing:26094)"

#: Cura/gui/configWizard.py:423
msgid "Upgrade Ultimaker Firmware"
msgstr "Mettre à jour le micrologiciel Ultimaker"

#: Cura/gui/configWizard.py:424
msgid ""
"Firmware is the piece of software running directly on your 3D printer.\n"
"This firmware controls the step motors, regulates the temperature\n"
"and ultimately makes your printer work."
msgstr ""
"Le micrologiciel est la partie logicielle qui tourne sur l'imprimante 3D.\n"
"Ce logiciel embarqué contrôle les moteurs, régule les températures\n"
"et permet au final à l'imprimante de fonctionner. "

#: Cura/gui/configWizard.py:426
msgid ""
"The firmware shipping with new Ultimakers works, but upgrades\n"
"have been made to make better prints, and make calibration easier."
msgstr ""
"Le micrologiciel des nouvelles Ultimakers fonctionne, mais une\n"
"mise à jour donne de meilleures impressions ou facilite la calibration."

#: Cura/gui/configWizard.py:428
msgid ""
"Cura requires these new features and thus\n"
"your firmware will most likely need to be upgraded.\n"
"You will get the chance to do so now."
msgstr ""
"Cura requiert ces nouvelles options et votre\n"
"micrologiciel aura probablement besoin d'être mis à jour.\n"
"Vous allez pouvoir le faire maintenant."

#: Cura/gui/configWizard.py:433
msgid "Do not upgrade to this firmware if:"
msgstr "Ne mettez pas à jour le micrologiciel si:"

#: Cura/gui/configWizard.py:434
#, fuzzy
msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
msgstr "* Vous avez une ancienne machine basée sur un ATMega1280 "

#: Cura/gui/configWizard.py:435
msgid "* Have other changes in the firmware"
msgstr "* Vous avez des changements particuliers dans le micrologiciel"

#: Cura/gui/configWizard.py:469
msgid ""
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"
"You can skip these if you know your machine is functional."
msgstr ""
"Effectuer quelques tests préliminaires est une bonne idée.\n"
"Vous pouvez les ignorer si vous savez votre machine fonctionnelle."

#: Cura/gui/configWizard.py:470
msgid "Run checks"
msgstr "Lancer les tests"

#: Cura/gui/configWizard.py:470
msgid "Skip checks"
msgstr "Ignorer les tests"

#: Cura/gui/configWizard.py:474
msgid "Communication:"
msgstr "Communication:"

#: Cura/gui/configWizard.py:475
msgid "Temperature:"
msgstr "Temperature:"

#: Cura/gui/configWizard.py:476
msgid "Endstops:"
msgstr "Butées de fin de course:"

#: Cura/gui/configWizard.py:481
msgid "Show error log"
msgstr "Montrer le journal d'erreur"

#: Cura/gui/configWizard.py:515
msgid "Connecting to machine."
msgstr "Connexion à la machine."

#: Cura/gui/configWizard.py:536
msgid "Cooldown before temperature check."
msgstr "Refroidir avant le test de température."

#: Cura/gui/configWizard.py:542 Cura/gui/configWizard.py:549
msgid "Checking the heater and temperature sensor."
msgstr "Test du module de chauffe et du capteur de température."

#: Cura/gui/configWizard.py:560
msgid "Please make sure none of the endstops are pressed."
msgstr "Veuillez vérifier que les butées de fin de courses sont appuyées."

#: Cura/gui/configWizard.py:573
msgid "Temperature measurement FAILED!"
msgstr "ECHEC de mesure de la température!"

#: Cura/gui/configWizard.py:578
#, python-format
msgid "Head temperature: %d"
msgstr "Température de la tête: %d"

#: Cura/gui/configWizard.py:585 Cura/gui/configWizard.py:594
#, python-format
msgid "Communication State: %s"
msgstr "Etat de la communication: %s"

#: Cura/gui/configWizard.py:588
msgid "Failed to establish connection with the printer."
msgstr "Impossible d'établir la communication avec l'imprimante."

#: Cura/gui/configWizard.py:633
msgid "Please press the right X endstop."
msgstr "Veuillez appuyer sur la butée X de droite."

#: Cura/gui/configWizard.py:638
msgid "Please press the left X endstop."
msgstr "Veuillez appuyer sur la butée X de gauche."

#: Cura/gui/configWizard.py:643
msgid "Please press the front Y endstop."
msgstr "Veuillez appuyer sur la butée Y de devant."

#: Cura/gui/configWizard.py:648
msgid "Please press the back Y endstop."
msgstr "Veuillez appuyer sur la butée Y du fond."

#: Cura/gui/configWizard.py:653
msgid "Please press the top Z endstop."
msgstr "Veuillez appuyer sur la butée Z du bas."

#: Cura/gui/configWizard.py:658
msgid "Please press the bottom Z endstop."
msgstr "Veuillez appuyer sur la butée Z du haut."

#: Cura/gui/configWizard.py:664
msgid "Checkup finished"
msgstr "Validation terminée"

#: Cura/gui/configWizard.py:707
msgid "Calibrating the Steps Per E requires some manual actions."
msgstr "La calibration du nombre de pas par E requiert une action manuelle."

#: Cura/gui/configWizard.py:708
msgid "First remove any filament from your machine."
msgstr "Veuillez d'abord retirer le filament de votre machine."

#: Cura/gui/configWizard.py:709
msgid ""
"Next put in your filament so the tip is aligned with the\n"
"top of the extruder drive."
msgstr ""
"Ensuite alignez le filament de façon à ce qu'il affleure\n"
"du système d'entrainement (ex.: en sortie du tube)."

#: Cura/gui/configWizard.py:710
msgid "We'll push the filament 100mm"
msgstr "100mm de filament vont être déroulés"

#: Cura/gui/configWizard.py:711
msgid "Extrude 100mm filament"
msgstr "Extrusion de 100mm de filament"

#: Cura/gui/configWizard.py:712
msgid ""
"Now measure the amount of extruded filament:\n"
"(this can be more or less then 100mm)"
msgstr ""
"Maintenant mesurez la longueur réellement déroulée\n"
"(ce peut être différent de 100mm) "

#: Cura/gui/configWizard.py:713
msgid "Save"
msgstr "Sauvegarder"

#: Cura/gui/configWizard.py:714
msgid "This results in the following steps per E:"
msgstr "Le calcul fournit la valeur de pas par E suivante:"

#: Cura/gui/configWizard.py:716
msgid "You can repeat these steps to get better calibration."
msgstr "Vous pouvez répéter cette opération pour une mailleure calibration. "

#: Cura/gui/configWizard.py:719
msgid ""
"If you still have filament in your printer which needs\n"
"heat to remove, press the heat up button below:"
msgstr ""
"Si vous avez du filament froid bloqué dans la tête\n"
"appuyez sur le bouton de chauffe ci-dessous:"

#: Cura/gui/configWizard.py:720
msgid "Heatup for filament removal"
msgstr "Chauffe pour retrait du filament"

#: Cura/gui/configWizard.py:745 Cura/gui/configWizard.py:779
msgid ""
"Error: Failed to open serial port to machine\n"
"If this keeps happening, try disconnecting and reconnecting the USB cable"
msgstr ""
"Erreur: impossible d'ouvrir le port série de la machine\n"
"Si ce problème persiste, essayer de reconnecter le cable USB"

#: Cura/gui/firmwareInstall.py:44
msgid ""
"I am sorry, but Cura does not ship with a default firmware for your machine "
"configuration."
msgstr ""
"Désolé, mais Cura n'est pas livré avec un micrologiciel par défault dédié à "
"votre machine."

#: Cura/gui/firmwareInstall.py:44 Cura/gui/firmwareInstall.py:48
#: Cura/gui/firmwareInstall.py:103 Cura/gui/mainWindow.py:506
msgid "Firmware update"
msgstr "Mise à jour du micrologiciel"

#: Cura/gui/firmwareInstall.py:48
msgid ""
"Cura only supports firmware updates for ATMega2560 based hardware.\n"
"So updating your RepRap with Cura might or might not work."
msgstr ""

#: Cura/gui/firmwareInstall.py:56
msgid "OK"
msgstr "OK"

#: Cura/gui/firmwareInstall.py:77
msgid "Reading firmware..."
msgstr "Lecture du micrologiciel..."

#: Cura/gui/firmwareInstall.py:79
msgid "Connecting to machine..."
msgstr "Connexion à la machine..."

#: Cura/gui/firmwareInstall.py:83
msgid ""
"Please connect the printer to\n"
"your computer with the USB cable."
msgstr ""

#: Cura/gui/firmwareInstall.py:102
msgid ""
"Failed to find machine for firmware upgrade\n"
"Is your machine connected to the PC?"
msgstr ""
"Aucune machine trouvée pour ce micrologiciel\n"
"Est-elle connectée à votre PC? "

#: Cura/gui/firmwareInstall.py:107
msgid "Uploading firmware..."
msgstr "Téléversement du micologiciel..."

#: Cura/gui/firmwareInstall.py:110
#, python-format
msgid ""
"Done!\n"
"Installed firmware: %s"
msgstr ""
"Teminé!\n"
"Micrologiciel installé: %s"

#: Cura/gui/firmwareInstall.py:112
msgid "Failed to write firmware.\n"
msgstr "Echec d'écriture du micrologiciel.\n"

#: Cura/gui/mainWindow.py:66
msgid "Load model file...\tCTRL+L"
msgstr "Ouvrir un modèle...\tCTRL+L"

#: Cura/gui/mainWindow.py:68
msgid "Save model...\tCTRL+S"
msgstr "Sauver le modèle...\tCTRL+S"

#: Cura/gui/mainWindow.py:70
#, fuzzy
msgid "Reload platform\tF5"
msgstr "Vider la plateforme"

#: Cura/gui/mainWindow.py:72
msgid "Clear platform"
msgstr "Vider la plateforme"

#: Cura/gui/mainWindow.py:76
msgid "Print...\tCTRL+P"
msgstr "Imprimer...\tCTRL+P"

#: Cura/gui/mainWindow.py:78 Cura/gui/sceneView.py:279
msgid "Save GCode..."
msgstr "Sauver le GCode..."

#: Cura/gui/mainWindow.py:80
msgid "Show slice engine log..."
msgstr "Montrer le log du trancheur..."

#: Cura/gui/mainWindow.py:84
msgid "Open Profile..."
msgstr "Ouvrir un profil..."

#: Cura/gui/mainWindow.py:87
msgid "Save Profile..."
msgstr "Sauver le profil..."

#: Cura/gui/mainWindow.py:90
msgid "Load Profile from GCode..."
msgstr "Profil depuis un GCode..."

#: Cura/gui/mainWindow.py:94
msgid "Reset Profile to default"
msgstr "Utiliser le profil par défaut"

#: Cura/gui/mainWindow.py:99
msgid "Preferences...\tCTRL+,"
msgstr "Préférences...\tCTRL+,"

#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434
msgid "Machine settings..."
msgstr "Réglages machine..."

#: Cura/gui/mainWindow.py:107
msgid "Recent Model Files"
msgstr "Modèles récents"

#: Cura/gui/mainWindow.py:114
msgid "Recent Profile Files"
msgstr "Profils récents"

#: Cura/gui/mainWindow.py:120
msgid "Quit"
msgstr "Quitter"

#: Cura/gui/mainWindow.py:122
msgid "File"
msgstr "Fichier"

#: Cura/gui/mainWindow.py:130
msgid "Minecraft map import..."
msgstr "Importer une carte Minecraft..."

#: Cura/gui/mainWindow.py:134
msgid "PID Debugger..."
msgstr "Déboguer le PID..."

#: Cura/gui/mainWindow.py:137
msgid "Copy profile to clipboard"
msgstr "Copier le profil dans le blocnote"

#: Cura/gui/mainWindow.py:141
msgid "Print all at once"
msgstr ""

#: Cura/gui/mainWindow.py:143
#, fuzzy
msgid "Print one at a time"
msgstr "Taille de la tête"

#: Cura/gui/mainWindow.py:150
msgid "Tools"
msgstr "Outils"

#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175
msgid "Machine"
msgstr "Machine"

#: Cura/gui/mainWindow.py:159
msgid "Switch to quickprint..."
msgstr "Basculer en mode simple..."

#: Cura/gui/mainWindow.py:163
msgid "Switch to full settings..."
msgstr "Basculer en mode complet..."

#: Cura/gui/mainWindow.py:168
#, fuzzy
msgid "Open expert settings...\tCTRL+E"
msgstr "Configuration experte..."

#: Cura/gui/mainWindow.py:172
msgid "Run first run wizard..."
msgstr "Assistant initial..."

#: Cura/gui/mainWindow.py:174
msgid "Run bed leveling wizard..."
msgstr "Assistant de mise a niveau du lit..."

#: Cura/gui/mainWindow.py:176
msgid "Run head offset wizard..."
msgstr "Assistant de décalage des têtes..."

#: Cura/gui/mainWindow.py:179
msgid "Expert"
msgstr "Expert"

#: Cura/gui/mainWindow.py:182
msgid "Online documentation..."
msgstr "Documentation en ligne..."

#: Cura/gui/mainWindow.py:184
msgid "Report a problem..."
msgstr "Rapporter un problème..."

#: Cura/gui/mainWindow.py:186
msgid "Check for update..."
msgstr "Vérifier les mises à jour..."

#: Cura/gui/mainWindow.py:188
msgid "Open YouMagine website..."
msgstr "Ouvrir le site YouMagine..."

#: Cura/gui/mainWindow.py:190
msgid "About Cura..."
msgstr "A propos de Cura..."

#: Cura/gui/mainWindow.py:192
msgid "Help"
msgstr "Aide"

#: Cura/gui/mainWindow.py:343
msgid ""
"For \"One at a time\" printing, you need to have entered the correct head "
"size and gantry height in the machine settings"
msgstr ""

#: Cura/gui/mainWindow.py:343
msgid "One at a time warning"
msgstr ""

#: Cura/gui/mainWindow.py:440
#, fuzzy
msgid "Install default firmware..."
msgstr "Installer le micrologicel Marlin par défaut"

#: Cura/gui/mainWindow.py:443
#, fuzzy
msgid "Install custom firmware..."
msgstr "Installer un micrologiciel maison"

#: Cura/gui/mainWindow.py:447
msgid "Select profile file to load"
msgstr "Sélection du profil à "

#: Cura/gui/mainWindow.py:459
msgid "Select gcode file to load profile from"
msgstr "Sélection du fichier GCode à utiliser"

#: Cura/gui/mainWindow.py:472
msgid ""
"No profile found in GCode file.\n"
"This feature only works with GCode files made by Cura 12.07 or newer."
msgstr ""
"Pas de profil trouvé dans le fichier GCode.\n"
"Cette option ne marche qu'avec les fichiers crées à partir de Cura 12.07. "

#: Cura/gui/mainWindow.py:472
msgid "Profile load error"
msgstr "Erreur de chargement du profil"

#: Cura/gui/mainWindow.py:476
msgid "Select profile file to save"
msgstr "Sélectio du profil à sauvegarder"

#: Cura/gui/mainWindow.py:486
msgid ""
"This will reset all profile settings to defaults.\n"
"Unless you have saved your current profile, all settings will be lost!\n"
"Do you really want to reset?"
msgstr ""
"Cela va réinitialiser tous les réglages de profil.\n"
"A moins de l'avoir sauvegardé, tous les réglages actuels seront perdus!\n"
"Voulez-vous vraiment les réinitialiser?"

#: Cura/gui/mainWindow.py:486
msgid "Profile reset"
msgstr "Réinitialisation du profile"

#: Cura/gui/mainWindow.py:506
msgid ""
"Warning: Installing a custom firmware does not guarantee that you machine "
"will function correctly, and could damage your machine."
msgstr ""
"Attention: installer un micrologiciel maison ne garantit pas le bon "
"fonctionnement de votre machine et pourrait même l'endommager."

#: Cura/gui/mainWindow.py:507
msgid "Open firmware to upload"
msgstr "Sélection du micrologiciel à mettre à jour"

#: Cura/gui/mainWindow.py:566
msgid "You are running the latest version of Cura!"
msgstr "Vous avez la dernière version de Cura!"

#: Cura/gui/mainWindow.py:566
msgid "Awesome!"
msgstr "Excellent!"

#: Cura/gui/mainWindow.py:621
msgid "Plugins"
msgstr "Extensions"

#: Cura/gui/pluginPanel.py:27
msgid "Plugins:"
msgstr "Extensions:"

#: Cura/gui/pluginPanel.py:31
msgid "Open plugin location"
msgstr "Ouvrir l'emplacement des extensions"

#: Cura/gui/pluginPanel.py:32
msgid "Enabled plugins"
msgstr "Extensions activées"

#: Cura/gui/pluginPanel.py:134
msgid "You need to select a plugin before you can add anything."
msgstr "Vous devez d'abord sélectionner une extension avant de l'ajouter."

#: Cura/gui/pluginPanel.py:134
msgid "Error: no plugin selected"
msgstr "Erreur: aucune extension sélectionnée"

#: Cura/gui/preferencesDialog.py:28
#, fuzzy
msgid "Print window"
msgstr "Impression"

#: Cura/gui/preferencesDialog.py:31
msgid "Colours"
msgstr "Couleurs"

#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:358
msgid "Language"
msgstr ""

#: Cura/gui/preferencesDialog.py:40
msgid "Filament settings"
msgstr "Réglages du filament"

#: Cura/gui/preferencesDialog.py:50
msgid "Cura settings"
msgstr "Réglages de Cura"

#: Cura/gui/preferencesDialog.py:84
msgid "Machine settings"
msgstr "Réglages de la machine"

#: Cura/gui/preferencesDialog.py:95
msgid "Printer head size"
msgstr "Taille de la tête"

#: Cura/gui/preferencesDialog.py:103
#, python-format
msgid "Extruder %d"
msgstr "Extrudeur %d"

#: Cura/gui/preferencesDialog.py:107
msgid "Communication settings"
msgstr "Réglages de la communication"

#: Cura/gui/preferencesDialog.py:150
msgid "Cannot remove the last machine configuration in Cura"
msgstr "La dernière configuration de machine ne peut pas être retirée"

#: Cura/gui/preferencesDialog.py:150
msgid "Machine remove error"
msgstr "Impossible de retrier la machine"

#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:298
#, fuzzy, python-format
msgid "Printing on %s"
msgstr "Impression"

#: Cura/gui/printWindow.py:310
msgid ""
"Your computer is running on battery power.\n"
"Connect your computer to AC power or your print might not finish."
msgstr ""
"Votre ordinateur est sur batteries.\n"
"Branchez-le au secteur ou bien votre impression pourrait s'interrompre."

#: Cura/gui/printWindow.py:320
msgid ""
"InfoLine from printer connection\n"
"InfoLine from dialog\n"
"Extra line"
msgstr ""

#: Cura/gui/printWindow.py:322
msgid "Connect"
msgstr "Connecter"

#: Cura/gui/printWindow.py:324 Cura/gui/sceneView.py:65
msgid "Print"
msgstr "Imprimer"

#: Cura/gui/printWindow.py:325
msgid "Pause"
msgstr "Pause"

#: Cura/gui/printWindow.py:326
msgid "Cancel print"
msgstr "Interrompre l'impression"

#: Cura/gui/printWindow.py:327
msgid "Error log"
msgstr "Journal d'erreur"

#: Cura/gui/sceneView.py:64
msgid "Load"
msgstr "Charger"

#: Cura/gui/sceneView.py:69
msgid "Rotate"
msgstr "Tourner"

#: Cura/gui/sceneView.py:70
msgid "Scale"
msgstr "Redimensionner"

#: Cura/gui/sceneView.py:71
msgid "Mirror"
msgstr "Inverser"

#: Cura/gui/sceneView.py:73 Cura/gui/sceneView.py:76
msgid "Reset"
msgstr "Réinitialiser"

#: Cura/gui/sceneView.py:74
msgid "Lay flat"
msgstr "Mettre à plat"

#: Cura/gui/sceneView.py:77
msgid "To max"
msgstr "Au maximum"

#: Cura/gui/sceneView.py:79
msgid "Mirror X"
msgstr "Miroir X"

#: Cura/gui/sceneView.py:80
msgid "Mirror Y"
msgstr "Miroir Y"

#: Cura/gui/sceneView.py:81
msgid "Mirror Z"
msgstr "Miroir Z"

#: Cura/gui/sceneView.py:89
msgid "Scale X"
msgstr "Echelle X"

#: Cura/gui/sceneView.py:91
msgid "Scale Y"
msgstr "Echelle Y"

#: Cura/gui/sceneView.py:93
msgid "Scale Z"
msgstr "Echelle Z"

#: Cura/gui/sceneView.py:95
msgid "Size X (mm)"
msgstr "Taille X (mm)"

#: Cura/gui/sceneView.py:97
msgid "Size Y (mm)"
msgstr "Taille Y (mm)"

#: Cura/gui/sceneView.py:99
msgid "Size Z (mm)"
msgstr "Taille Z (mm)"

#: Cura/gui/sceneView.py:101
msgid "Uniform scale"
msgstr "Echelle uniforme"

#: Cura/gui/sceneView.py:104
msgid "View mode"
msgstr "Mode de visualisation"

#: Cura/gui/sceneView.py:104
msgid "Normal"
msgstr "Normal"

#: Cura/gui/sceneView.py:104
msgid "Overhang"
msgstr "Surplombs"

#: Cura/gui/sceneView.py:104
msgid "Transparent"
msgstr "Transparent"

#: Cura/gui/sceneView.py:104
msgid "X-Ray"
msgstr "Rayons X"

#: Cura/gui/sceneView.py:104
msgid "Layers"
msgstr "Couches"

#: Cura/gui/sceneView.py:106
msgid "Share on YouMagine"
msgstr "Partager sur YouMagine"

#: Cura/gui/sceneView.py:204
msgid "Open 3D model"
msgstr "Ouvrir un modèle 3D"

#: Cura/gui/sceneView.py:229
msgid "Save 3D model"
msgstr "Sauver le modèle 3D"

#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:914
#, fuzzy, python-format
msgid "Print with %s"
msgstr "Imprimer par USB"

#: Cura/gui/sceneView.py:280
msgid "Slice engine log..."
msgstr "Journal du trancheur..."

#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:917
msgid "Save toolpath"
msgstr "Sauvegarder les instructions d'impression"

#: Cura/gui/sceneView.py:351
msgid "The slicing engine reported the following"
msgstr "Le trancheur à rapporté ceci"

#: Cura/gui/sceneView.py:351
msgid "Engine log..."
msgstr "Journal du trancheur..."

#: Cura/gui/sceneView.py:490
msgid "How many copies do you want?"
msgstr ""

#: Cura/gui/sceneView.py:490
msgid "Number of copies"
msgstr ""

#: Cura/gui/sceneView.py:490
#, fuzzy
msgid "Multiply"
msgstr "Multiplier"

#: Cura/gui/sceneView.py:780
msgid "Center on platform"
msgstr "Centrer sur la plateforme"

#: Cura/gui/sceneView.py:781
msgid "Delete object"
msgstr "Détruire l'objet"

#: Cura/gui/sceneView.py:782
msgid "Multiply object"
msgstr "Multiplier"

#: Cura/gui/sceneView.py:783
msgid "Split object into parts"
msgstr "Eclater l'objet en parties"

#: Cura/gui/sceneView.py:785
msgid "Dual extrusion merge"
msgstr "Fusionner pour extrusion double"

#: Cura/gui/sceneView.py:787
msgid "Delete all objects"
msgstr "Détruire tous les objets"

#: Cura/gui/sceneView.py:788
#, fuzzy
msgid "Reload all objects"
msgstr "Détruire tous les objets"

#: Cura/gui/sceneView.py:911
msgid "Toolpath to SD"
msgstr "Instructions d'impression vers la carte SD"

#: Cura/gui/sceneView.py:1205
msgid "Overhang view not working due to lack of OpenGL shaders support."
msgstr ""
"Mode surplomb impossible par limitation d'OpenGL (support des shaders). "

#: Cura/gui/simpleMode.py:19
msgid "High quality print"
msgstr "Impression haute qualité"

#: Cura/gui/simpleMode.py:20
msgid "Normal quality print"
msgstr "Impression qualité normale"

#: Cura/gui/simpleMode.py:21
msgid "Fast low quality print"
msgstr "Impression rapide et basse qualité"

#: Cura/gui/simpleMode.py:22
msgid "Thin walled cup or vase"
msgstr "Vase ou coupe à parois fines "

#: Cura/gui/simpleMode.py:32
msgid "Print support structure"
msgstr "Supports d'impression"

#: Cura/gui/simpleMode.py:37
#, fuzzy
msgid "Select a quickprint profile:"
msgstr "Sélectionner un mode :"

#: Cura/gui/simpleMode.py:47
msgid "Material:"
msgstr "Matériau:"

#: Cura/gui/simpleMode.py:51
msgid "Diameter:"
msgstr "Diamètre:"

#: Cura/gui/simpleMode.py:57
msgid "Other:"
msgstr "Autre:"

#: Cura/gui/simpleMode.py:85
msgid "Exterior Only"
msgstr "Extérieur seuement"

#: Cura/gui/tools/imageToMesh.py:28
#, fuzzy
msgid "Height (mm)"
msgstr "Hauteur de couche (mm)"

#: Cura/gui/tools/imageToMesh.py:32
#, fuzzy
msgid "Base (mm)"
msgstr "Epaisseur de la couche de base (mm)"

#: Cura/gui/tools/imageToMesh.py:36
#, fuzzy
msgid "Width (mm)"
msgstr "Largeur de la machine (mm)"

#: Cura/gui/tools/imageToMesh.py:40
#, fuzzy
msgid "Depth (mm)"
msgstr "DIamètre (mm)"

#: Cura/gui/tools/projector.py:42
msgid "Edit"
msgstr ""

#: Cura/gui/tools/projector.py:43
msgid "Rectangle"
msgstr ""

#: Cura/gui/tools/projector.py:44
#, fuzzy
msgid "Circle"
msgstr "Fichier"

#: Cura/gui/tools/projector.py:45
msgid "Draw curves"
msgstr ""

#: Cura/gui/tools/youmagineGui.py:78
msgid "Checking token"
msgstr "Vérification du jeton (token)"

#: Cura/gui/tools/youmagineGui.py:82
msgid "Failed to contact YouMagine.com"
msgstr "Impossible de se connecter à YouMagine.com"

#: Cura/gui/tools/youmagineGui.py:82 Cura/gui/tools/youmagineGui.py:116
#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
#: Cura/gui/tools/youmagineGui.py:148 Cura/gui/tools/youmagineGui.py:153
msgid "YouMagine error."
msgstr "Erreur YouMagine."

#: Cura/gui/tools/youmagineGui.py:100
msgid "Cura is now authorized to share on YouMagine"
msgstr "Cura est désormais autorisé à partager sur YouMagine."

#: Cura/gui/tools/youmagineGui.py:100
msgid "YouMagine."
msgstr "YouMagine."

#: Cura/gui/tools/youmagineGui.py:112
msgid "Creating new design on YouMagine..."
msgstr "Création d'un nouveau design sur YouMagine..."

#: Cura/gui/tools/youmagineGui.py:116
msgid "Failed to create a design, nothing uploaded!"
msgstr "Echec de création, rien n'a été envoyé!"

#: Cura/gui/tools/youmagineGui.py:120
#, python-format
msgid "Building model %s..."
msgstr "Construction du modèle %s..."

#: Cura/gui/tools/youmagineGui.py:131
#, python-format
msgid "Uploading model %s..."
msgstr "Envoi du modèle %s..."

#: Cura/gui/tools/youmagineGui.py:133 Cura/gui/tools/youmagineGui.py:140
#: Cura/gui/tools/youmagineGui.py:148
#, python-format
msgid "Failed to upload %s!"
msgstr "Impossible d'envoyer %s!"

#: Cura/gui/tools/youmagineGui.py:137
#, python-format
msgid "Uploading file %s..."
msgstr "Envoi du fichier %s..."

#: Cura/gui/tools/youmagineGui.py:145
#, python-format
msgid "Uploading image %s..."
msgstr "Envoi de l'image %s..."

#: Cura/gui/tools/youmagineGui.py:153
msgid "Failed to upload snapshot!"
msgstr "Impossible d'envoyer l'image!"

#: Cura/gui/tools/youmagineGui.py:158
msgid "Publishing design..."
msgstr "Publication du design..."

#: Cura/gui/tools/youmagineGui.py:230
msgid "Request authorization from YouMagine"
msgstr "Demande d'autorisation de YouMagine"

#: Cura/gui/tools/youmagineGui.py:231
msgid "Paste token here"
msgstr "Coller le jeton (token) ici"

#: Cura/gui/tools/youmagineGui.py:237
msgid ""
"To share your designs on YouMagine\n"
"you need an account on YouMagine.com\n"
"and authorize Cura to access your account."
msgstr ""
"Pour partager vos créations sur YouMagine\n"
"vous nécessitez un compte sur YouMagine.com\n"
"et autoriser Cura à s'y connecter."

#: Cura/gui/tools/youmagineGui.py:239
msgid ""
"This will open a browser window where you can\n"
"authorize Cura to access your YouMagine account.\n"
"You can revoke access at any time\n"
"from YouMagine.com"
msgstr ""
"Un navigateur va s'ouvrir d'où vous pourrez\n"
"autoriser Cura à accéder à votre compte YouMagine.\n"
"Vous pourrez révoquer ce droit à tout moment\n"
"depuis YouMagine.com "

#: Cura/gui/tools/youmagineGui.py:274
msgid "Design name"
msgstr "Nom de la création"

#: Cura/gui/tools/youmagineGui.py:278
msgid "Publish after upload"
msgstr "Publier après envoi"

#: Cura/gui/tools/youmagineGui.py:279
msgid "Share!"
msgstr "Partager!"

#: Cura/gui/tools/youmagineGui.py:287
msgid "Add..."
msgstr "Ajouter..."

#: Cura/gui/tools/youmagineGui.py:289
msgid "Webcam..."
msgstr "Webcam..."

#: Cura/gui/tools/youmagineGui.py:299
msgid ""
"Directly publish the design after uploading.\n"
"Without this check the design will not be public\n"
"until you publish it yourself on YouMagine.com"
msgstr ""
"Publier directement après envoi.\n"
"Sans cette option, la création ne deviendra publique\n"
"que si vous la publiez explicitement sur YouMagine.com."

#: Cura/gui/tools/youmagineGui.py:305
msgid "Design name:"
msgstr "Nom de la création:"

#: Cura/gui/tools/youmagineGui.py:307
msgid "Description:"
msgstr "Description:"

#: Cura/gui/tools/youmagineGui.py:309
msgid "Category:"
msgstr "Catégorie:"

#: Cura/gui/tools/youmagineGui.py:311
msgid "License:"
msgstr "License:"

#: Cura/gui/tools/youmagineGui.py:314
msgid "Images:"
msgstr "Images:"

#: Cura/gui/tools/youmagineGui.py:317
msgid "Related design files:"
msgstr "Créations associes:"

#: Cura/gui/tools/youmagineGui.py:340
msgid "The name cannot be empty"
msgstr "Le nom ne peut être vide"

#: Cura/gui/tools/youmagineGui.py:340 Cura/gui/tools/youmagineGui.py:344
msgid "New design error."
msgstr "Erreur avec le nouveau design."

#: Cura/gui/tools/youmagineGui.py:344
msgid "The description cannot be empty"
msgstr "La description ne peut être vide"

#: Cura/gui/tools/youmagineGui.py:370
msgid "No webcam found on your system"
msgstr ""

#: Cura/gui/tools/youmagineGui.py:370
msgid "Webcam error"
msgstr ""

#: Cura/gui/util/engineResultView.py:165
#, fuzzy, python-format
msgid "Loading toolpath for visualization (%d%%)"
msgstr "Chargement des instruction d'impression pour visualisation..."

#: Cura/gui/util/openglGui.py:242
msgid "An error has occurred during the 3D view drawing."
msgstr "Une erreur est apparue lors du rendu 3D de la vue."

#: Cura/gui/util/openglGui.py:250
msgid "3D window error"
msgstr "Erreur de vue 3D"

#: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172
#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:203
msgid "Quality"
msgstr "QUalité"

#: Cura/util/profile.py:170
msgid "Layer height (mm)"
msgstr "Hauteur de couche (mm)"

#: Cura/util/profile.py:170
msgid ""
"Layer height in millimeters.\n"
"This is the most important setting to determine the quality of your print. "
"Normal quality prints are 0.1mm, high quality is 0.06mm. You can go up to "
"0.25mm with an Ultimaker for very fast prints at low quality."
msgstr ""
"Hauteur en millimètre des couches (tranches).\n"
"C'est l'un des paramètres les plus importants pour déterminer la qualité de "
"votre impression. Une qualité normale s'obtient avec 0.1mm, une grande "
"qualité avec 0.06. Il est possible de monter jusqu'à 0.25mm avec une "
"Ultimaker pour des impressions très rapides (proportionnel au diamètre de la "
"buse, ici sur une base de 0.4mm)."

#: Cura/util/profile.py:171
msgid "Shell thickness (mm)"
msgstr "Epaisseur des murs"

#: Cura/util/profile.py:171
msgid ""
"Thickness of the outside shell in the horizontal direction.\n"
"This is used in combination with the nozzle size to define the number\n"
"of perimeter lines and the thickness of those perimeter lines."
msgstr ""
"Epaisseur des enveloppes extérieures dans le plan horizontal.\n"
"C'est utilisé en combinaison avec la taille de buse pour définir le nombre\n"
"de lignes périmétriques ainsi que leur épaisseur."

#: Cura/util/profile.py:172
msgid "Enable retraction"
msgstr "Autoriser le retrait"

#: Cura/util/profile.py:172
msgid ""
"Retract the filament when the nozzle is moving over a none-printed area. "
"Details about the retraction can be configured in the advanced tab."
msgstr ""
"Effectue un retrait rapide du filament lorsque la buse survole une zone non "
"imprimée. Le réglage du retrait peut se configurer dans l'onglet des "
"paramètres avancé."

#: Cura/util/profile.py:173 Cura/util/profile.py:174
msgid "Fill"
msgstr "Remplissage"

#: Cura/util/profile.py:173
msgid "Bottom/Top thickness (mm)"
msgstr "Epaisseurs dessus/dessous (mm)"

#: Cura/util/profile.py:173
msgid ""
"This controls the thickness of the bottom and top layers, the amount of "
"solid layers put down is calculated by the layer thickness and this value.\n"
"Having this value a multiple of the layer thickness makes sense. And keep it "
"near your wall thickness to make an evenly strong part."
msgstr ""
"Epaisseurs des surfaces horizontales qui sont en contact avec l'extérieur. "
"Le nombre de ces couches dépend de cette valeur et de l'épaisseur des "
"couches individuelles. \n"
"Il est logique d'indiquer un multiple de l'épaisseur de couche, similaire à "
"l'épaisseur des murs ci-avant."

#: Cura/util/profile.py:174
msgid "Fill Density (%)"
msgstr "Remplissage (%)"

#: Cura/util/profile.py:174
#, fuzzy
msgid ""
"This controls how densely filled the insides of your print will be. For a "
"solid part use 100%, for an empty part use 0%. A value around 20% is usually "
"enough.\n"
"This won't affect the outside of the print and only adjusts how strong the "
"part becomes."
msgstr ""
"Indique la densité de remplissage des parties internes. Pour un objet plein, "
"indiquez 100%. Pour un objet creux 0% Une valeur autour de 20% est "
"généralement suffisante.\n"
"Ceci n'impacte pas l'aspect extérieur, mais seulement la solidité "
"structurelle de l'objet et le temps d'impression."

#: Cura/util/profile.py:175
msgid ""
"The nozzle size is very important, this is used to calculate the line width "
"of the infill, and used to calculate the amount of outside wall lines and "
"thickness for the wall thickness you entered in the print settings."
msgstr ""
"Le diamètre de la buse est très important, il est utilisé pour calculer la "
"quatité de matière à extruder (épaisseur du fil, nombre de passes sur les "
"parties externes saisie dans les autres réglages, remplissage...)."

#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181
msgid "Speed and Temperature"
msgstr "Vitesse et température"

#: Cura/util/profile.py:176
msgid "Print speed (mm/s)"
msgstr "VItesse d'impression (mm/s)"

#: Cura/util/profile.py:176
msgid ""
"Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
"s, but for good quality prints you want to print slower. Printing speed "
"depends on a lot of factors. So you will be experimenting with optimal "
"settings for this."
msgstr ""
"Vitesse à laquelle les choses se passent. Une Utilmaker bien configurée peut "
"atteindre les 150mm/s, mais une bonne qualité d'impression bénéficie d'une "
"vitesse moins grande. Une haute vitesse d'impression dépend de nombreux "
"facteurs, et requiert de bien expérimenter avec les différents réglages. "

#: Cura/util/profile.py:177
msgid "Printing temperature (C)"
msgstr "Température d'impression (C)"

#: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179
#: Cura/util/profile.py:180
msgid ""
"Temperature used for printing. Set at 0 to pre-heat yourself.\n"
"For PLA a value of 210C is usually used.\n"
"For ABS a value of 230C or higher is required."
msgstr ""
"La température à utiliser pour imprimer. Zéro pour la configurer "
"manuellement.\n"
"Pour le PLA une valeur de 210C est souvent utilisée.\n"
"Pour l'ABS une valeur de 230C ou plus est requise."

#: Cura/util/profile.py:178
msgid "2nd nozzle temperature (C)"
msgstr "Température (buse n°2)"

#: Cura/util/profile.py:179
msgid "3th nozzle temperature (C)"
msgstr "Température (buse n°3)"

#: Cura/util/profile.py:180
msgid "4th nozzle temperature (C)"
msgstr "Température (buse n°4)"

#: Cura/util/profile.py:181
msgid "Bed temperature (C)"
msgstr "Température du lit (C)"

#: Cura/util/profile.py:181
msgid ""
"Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
msgstr ""
"Température à utiliser pour le lit chauffant. Zéro pour la configurer "
"manuellement."

#: Cura/util/profile.py:182 Cura/util/profile.py:183
msgid "None"
msgstr "Aucun"

#: Cura/util/profile.py:182
msgid "Touching buildplate"
msgstr "En contact avec le lit"

#: Cura/util/profile.py:182
msgid "Everywhere"
msgstr "Partout"

#: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184
#: Cura/util/profile.py:223 Cura/util/profile.py:224 Cura/util/profile.py:225
#: Cura/util/profile.py:226 Cura/util/profile.py:227
msgid "Support"
msgstr "Support"

#: Cura/util/profile.py:182
msgid "Support type"
msgstr "Type de support"

#: Cura/util/profile.py:182
msgid ""
"Type of support structure build.\n"
"\"Touching buildplate\" is the most commonly used support setting.\n"
"\n"
"None does not do any support.\n"
"Touching buildplate only creates support where the support structure will "
"touch the build platform.\n"
"Everywhere creates support even on top of parts of the model."
msgstr ""
"Le type de support structurel.\n"
"\"En contact avec le lit\" est le type le plus souvent utilisé,\n"
"et ne crée que des supports qui s'appuient sur le lit.\n"
"\"Everywhere\" crée aussi des support qui s'appuient sur le modèle lui-"
"même.\n"
"\"Aucun\" désactive les supports d'impression."

#: Cura/util/profile.py:183 Cura/util/profile.py:230
msgid "Brim"
msgstr "Auréole"

#: Cura/util/profile.py:183 Cura/util/profile.py:231 Cura/util/profile.py:232
#: Cura/util/profile.py:233 Cura/util/profile.py:234 Cura/util/profile.py:235
#: Cura/util/profile.py:236
msgid "Raft"
msgstr "Grille"

#: Cura/util/profile.py:183
msgid "Platform adhesion type"
msgstr "Type d'accroche au lit"

#: Cura/util/profile.py:183
#, fuzzy
msgid ""
"Different options that help in preventing corners from lifting due to "
"warping.\n"
"Brim adds a single layer thick flat area around your object which is easy to "
"cut off afterwards, and it is the recommended option.\n"
"Raft adds a thick raster below the object and a thin interface between this "
"and your object.\n"
"(Note that enabling the brim or raft disables the skirt)"
msgstr ""
"Plusieurs options permettent de lutter contre le soulèvement des coins dû au "
"refroidissement.\n"
"\"Auréole\" (brim) ajoute une zone d'une seule couche tout autour et en "
"contact avec l'objet, facile à enlever ensuite (recommandé).\n"
"\"Grille\" (raft) prépare une grille épaisse intermédiaire sous l'ensemble "
"de l'objet.\n"
"Activer l'une ou l'autre de ces options désactive le contour."

#: Cura/util/profile.py:184
msgid "Both"
msgstr "Les deux"

#: Cura/util/profile.py:184
msgid "First extruder"
msgstr "Premier extrudeur"

#: Cura/util/profile.py:184
msgid "Second extruder"
msgstr "Second extrudeur"

#: Cura/util/profile.py:184
msgid "Support dual extrusion"
msgstr "Support des extrusions doubles"

#: Cura/util/profile.py:184
msgid ""
"Which extruder to use for support material, for break-away support you can "
"use both extruders.\n"
"But if one of the materials is more expensive then the other you could "
"select an extruder to use for support material. This causes more extruder "
"switches.\n"
"You can also use the 2nd extruder for soluble support materials."
msgstr ""
"Définit quels extrudeurs utilisent le support. Un support à retirer "
"manuellement est compatible avec les deux.\n"
"Mais si l'un des matériaux se dilate plus que l'autre vous pouvez choisir "
"lequel utiliser (cela créera plus de changement d'extrudeur).\n"
"Vous pouvez aussi utiliser le second extrudeur pour un support soluble. "

#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
#, fuzzy
msgid "Dual extrusion"
msgstr "Fusionner pour extrusion double"

#: Cura/util/profile.py:185
msgid "Wipe&prime tower"
msgstr ""

#: Cura/util/profile.py:185
msgid ""
"The wipe-tower is a tower printed on every layer when switching between "
"nozzles.\n"
"The old nozzle is wiped off on the tower before the new nozzle is used to "
"print the 2nd color."
msgstr ""

#: Cura/util/profile.py:186
msgid "Wipe&prime tower volume per layer (mm3)"
msgstr ""

#: Cura/util/profile.py:186
msgid ""
"The amount of material put in the wipe/prime tower.\n"
"This is done in volume because in general you want to extrude a\n"
"certain amount of volume to get the extruder going, independent on the layer "
"height.\n"
"This means that with thinner layers, your tower gets bigger."
msgstr ""

#: Cura/util/profile.py:187
msgid "Ooze shield"
msgstr ""

#: Cura/util/profile.py:187
msgid ""
"The ooze shield is a 1 line thick shell around the object which stands a few "
"mm from the object.\n"
"This shield catches any oozing from the unused nozzle in dual-extrusion."
msgstr ""

#: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190
#: Cura/util/profile.py:191 Cura/util/profile.py:192
msgid "Filament"
msgstr "Filament"

#: Cura/util/profile.py:188
msgid "Diameter (mm)"
msgstr "DIamètre (mm)"

#: Cura/util/profile.py:188
msgid ""
"Diameter of your filament, as accurately as possible.\n"
"If you cannot measure this value you will have to calibrate it, a higher "
"number means less extrusion, a smaller number generates more extrusion."
msgstr ""
"Le diamètre du filament utilisé, le plus précisément possible et mesuré en "
"plusieurs points.\n"
"Si cette valeur ne peut pas être mesurée, il faudra la calibrer: une valeur "
"plus grande donnera moins d'extrusion, une valeur plus petite extrudera "
"moins de matière."

#: Cura/util/profile.py:189
msgid "Diameter2 (mm)"
msgstr "Diamètre 2 (mm)"

#: Cura/util/profile.py:189
msgid ""
"Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
"as for nozzle 1."
msgstr ""
"Diamètre du filament dédié au deuxième extrudeur (indiquez zéro pour le même "
"diamètre que le premier)."

#: Cura/util/profile.py:190
msgid "Diameter3 (mm)"
msgstr "Diamètre 3 (mm)"

#: Cura/util/profile.py:190
msgid ""
"Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
"as for nozzle 1."
msgstr ""
"Diamètre du filament dédié au troisième extrudeur (indiquez zéro pour le "
"même diamètre que le premier)."

#: Cura/util/profile.py:191
msgid "Diameter4 (mm)"
msgstr "Diamètre 4 (mm)"

#: Cura/util/profile.py:191
msgid ""
"Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
"as for nozzle 1."
msgstr ""
"Diamètre du filament dédié au quatrième extrudeur (indiquez zéro pour le "
"même diamètre que le premier)."

#: Cura/util/profile.py:192
msgid "Flow (%)"
msgstr "Débit (%)"

#: Cura/util/profile.py:192
msgid ""
"Flow compensation, the amount of material extruded is multiplied by this "
"value"
msgstr ""
"Permet de compenser un débit qui serait incorrect, la quantité de matière "
"extrudée est multipliée par cette valeur."

#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
#: Cura/util/profile.py:199
msgid "Retraction"
msgstr "Retrait"

#: Cura/util/profile.py:193
msgid "Speed (mm/s)"
msgstr "Vitesse (mm/s)"

#: Cura/util/profile.py:193
msgid ""
"Speed at which the filament is retracted, a higher retraction speed works "
"better. But a very high retraction speed can lead to filament grinding."
msgstr ""
"Vitesse à laquelle s'effectue la marche arrière du filament. Une grande "
"vitesse donne de meilleurs résultats, mais une trop grande vitesse entraine "
"des problèmes. "

#: Cura/util/profile.py:194
msgid "Distance (mm)"
msgstr "Longueur (mm)"

#: Cura/util/profile.py:194
msgid ""
"Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
"seems to generate good results."
msgstr ""
"Longueur du retrait ou zéro pour désactiver le retrait. Une valeur de 4.5mm "
"donne de bons résultats."

#: Cura/util/profile.py:195
msgid "Dual extrusion switch amount (mm)"
msgstr "Retrait sur changement d'extrudeur (mm)"

#: Cura/util/profile.py:195
msgid ""
"Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
"no retraction at all. A value of 16.0mm seems to generate good results."
msgstr ""
"Longueur du retrait lors d'un changement d'extrudeur. Zéro pour désactiver. "
"Une valeur de 16.0mm donne de bon résultats."

#: Cura/util/profile.py:196
msgid "Minimum travel (mm)"
msgstr "Distance minimum (mm)"

#: Cura/util/profile.py:196
msgid ""
"Minimum amount of travel needed for a retraction to happen at all. To make "
"sure you do not get a lot of retractions in a small area."
msgstr ""
"Distance minimale qui déclenchera un retrait. Permet d'éviter d'effectuer un "
"grand nombre de retrait sur des zones petites."

#: Cura/util/profile.py:197
msgid "Enable combing"
msgstr "Activer les détours"

#: Cura/util/profile.py:197
msgid ""
"Combing is the act of avoiding holes in the print for the head to travel "
"over. If combing is disabled the printer head moves straight from the start "
"point to the end point and it will always retract."
msgstr ""
"Cette option autorise les détours pour éviter de survoler des zone non "
"imprimées lorsque la tête se déplace. Sans elle, la tête se déplace en ligne "
"droite et déclenche un retrait. "

#: Cura/util/profile.py:198
msgid "Minimal extrusion before retracting (mm)"
msgstr "Minimum d'extrusion avant retrait (mm)"

#: Cura/util/profile.py:198
#, fuzzy
msgid ""
"The minimal amount of extrusion that needs to be done before retracting "
"again if a retraction needs to happen before this minimal is reached the "
"retraction is ignored.\n"
"This avoids retracting a lot on the same piece of filament which flattens "
"the filament and causes grinding issues."
msgstr ""
"Cette longueur d'extrusion minimale est requise pour autoriser un nouveau "
"retrait (sinon il sera ignoré).\n"
"Cela permet d'éviter un grand nombre de retraits qui peuvent devenir "
"destructeurs pour le filament."

#: Cura/util/profile.py:199
#, fuzzy
msgid "Z hop when retracting (mm)"
msgstr "Minimum d'extrusion avant retrait (mm)"

#: Cura/util/profile.py:199
msgid ""
"When a retraction is done, the head is lifted by this amount to travel over "
"the print. A value of 0.075 works well. This feature has a lot of positive "
"effect on delta towers."
msgstr ""

#: Cura/util/profile.py:200
msgid "Initial layer thickness (mm)"
msgstr "Epaisseur de la première couche (mm)"

#: Cura/util/profile.py:200
msgid ""
"Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
"to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
"the other layers."
msgstr ""
"Une première couche épaisse donne une meilleure adhérence au lit. Spécifiez "
"zéro pour utiliser la même valeur que l'épaisseur habituel des autres "
"couches. "

#: Cura/util/profile.py:201
msgid "Cut off object bottom (mm)"
msgstr "Découpe inférieure (mm)"

#: Cura/util/profile.py:201
msgid ""
"Sinks the object into the platform, this can be used for objects that do not "
"have a flat bottom and thus create a too small first layer."
msgstr ""
"Décale et découpe la partie inférieure de l'objet comme s'il s'enfonçait "
"dans la plateforme.\n"
"Permet de compenser les objets qui n'ont pas un fond assez plat pour donner "
"une première couche suffisante."

#: Cura/util/profile.py:203
msgid "Dual extrusion overlap (mm)"
msgstr "Chevauchement de la double extrusion (mm)"

#: Cura/util/profile.py:203
#, fuzzy
msgid ""
"Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
"bonds the different colors together."
msgstr ""
"Ajoute un chevauchement réglable pour les impressions en double extrusion, "
"pour mieux souder les matières ensemble."

#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206
#: Cura/util/profile.py:207 Cura/util/profile.py:208
msgid "Speed"
msgstr "Vitesse"

#: Cura/util/profile.py:204
msgid "Travel speed (mm/s)"
msgstr "Vitesse de positionnement (mm/s)"

#: Cura/util/profile.py:204
#, fuzzy
msgid ""
"Speed at which travel moves are done, a well built Ultimaker can reach "
"speeds of 250mm/s. But some machines might miss steps then."
msgstr ""
"Vitesse de déplacement lorsque la tête n'imprime pas. Une Ultimaker bien "
"configurée peut atteindre 250mm/s, au-delà duquel certaines \"ratent\" des "
"pas."

#: Cura/util/profile.py:205
msgid "Bottom layer speed (mm/s)"
msgstr "Vitesse de la première couche (mm/s)"

#: Cura/util/profile.py:205
msgid ""
"Print speed for the bottom layer, you want to print the first layer slower "
"so it sticks better to the printer bed."
msgstr ""
"Vitesse d'impression pour la première couche. Elle est généralement imprimée "
"plus lentement pour une meilleur adhérence au lit."

#: Cura/util/profile.py:206
msgid "Infill speed (mm/s)"
msgstr "Vitesse de remplissage (mm/s)"

#: Cura/util/profile.py:206
#, fuzzy
msgid ""
"Speed at which infill parts are printed. If set to 0 then the print speed is "
"used for the infill. Printing the infill faster can greatly reduce printing "
"time, but this can negatively affect print quality."
msgstr ""
"Vitesse à laquelle l'impression des zones internes s'effectue. Zéro pour la "
"même vitesse que l'extérieur. Imprimer l'intérieur rapidement permet de "
"fortement reduire le temps d'impression mais peut impacter la qualité."

#: Cura/util/profile.py:207
#, fuzzy
msgid "Outer shell speed (mm/s)"
msgstr "Vitesse de positionnement (mm/s)"

#: Cura/util/profile.py:207
msgid ""
"Speed at which outer shell is printed. If set to 0 then the print speed is "
"used. Printing the outer shell at a lower speed improves the final skin "
"quality. However, having a large difference between the inner shell speed "
"and the outer shell speed will effect quality in a negative way."
msgstr ""

#: Cura/util/profile.py:208
#, fuzzy
msgid "Inner shell speed (mm/s)"
msgstr "Vitesse de remplissage (mm/s)"

#: Cura/util/profile.py:208
#, fuzzy
msgid ""
"Speed at which inner shells are printed. If set to 0 then the print speed is "
"used. Printing the inner shell faster then the outer shell will reduce "
"printing time. It is good to set this somewhere in between the outer shell "
"speed and the infill/printing speed."
msgstr ""
"Vitesse à laquelle l'impression des zones internes s'effectue. Zéro pour la "
"même vitesse que l'extérieur. Imprimer l'intérieur rapidement permet de "
"fortement reduire le temps d'impression mais peut impacter la qualité."

#: Cura/util/profile.py:209 Cura/util/profile.py:210 Cura/util/profile.py:215
#: Cura/util/profile.py:216 Cura/util/profile.py:217 Cura/util/profile.py:218
#: Cura/util/profile.py:219
msgid "Cool"
msgstr "Refroidissement"

#: Cura/util/profile.py:209
msgid "Minimal layer time (sec)"
msgstr "Temps minimum par couche (sec) "

#: Cura/util/profile.py:209
#, fuzzy
msgid ""
"Minimum time spent in a layer, gives the layer time to cool down before the "
"next layer is put on top. If the layer will be placed down too fast the "
"printer will slow down to make sure it has spent at least this amount of "
"seconds printing this layer."
msgstr ""
"Le temps minimum avant de passer à la couche suivante pour lui permettre de "
"se refroidir. Si la couche suivante est déposée trop vite, l'imprimante "
"ralentira pour garantir ce temps."

#: Cura/util/profile.py:210
msgid "Enable cooling fan"
msgstr "Activer le ventilateur"

#: Cura/util/profile.py:210
msgid ""
"Enable the cooling fan during the print. The extra cooling from the cooling "
"fan is essential during faster prints."
msgstr ""
"Active le ventilateur durant l'impression. C'est nécessaire lors "
"d'impressions rapides, mais cela dépend aussi du matériau imprimé."

#: Cura/util/profile.py:212
msgid "Line count"
msgstr "Nombre de lignes de contour"

#: Cura/util/profile.py:212
msgid ""
"The skirt is a line drawn around the object at the first layer. This helps "
"to prime your extruder, and to see if the object fits on your platform.\n"
"Setting this to 0 will disable the skirt. Multiple skirt lines can help "
"priming your extruder better for small objects."
msgstr ""
"Un contour est une ligne tracée autour de l'object sur la première couche. "
"Elle aide à établir le flux d'extrusion et à vérifier l'emplacement.\n"
"Indiquer zéro pour désactiver le contour. Plusieurs liges de contours aident "
"pour les petits objets ou les extrusions difficiles. "

#: Cura/util/profile.py:213
msgid "Start distance (mm)"
msgstr "Distance au contour (mm)"

#: Cura/util/profile.py:213
msgid ""
"The distance between the skirt and the first layer.\n"
"This is the minimal distance, multiple skirt lines will be put outwards from "
"this distance."
msgstr ""
"La distance entre le contour et l'objet.\n"
"Il s'agit de la distance minimale, les lignes contour additionnellles sont "
"ensuite déposées en s'éloignant."

#: Cura/util/profile.py:214
msgid "Minimal length (mm)"
msgstr "Longueur minimale du contour (mm)"

#: Cura/util/profile.py:214
msgid ""
"The minimal length of the skirt, if this minimal length is not reached it "
"will add more skirt lines to reach this minimal lenght.\n"
"Note: If the line count is set to 0 this is ignored."
msgstr ""
"Cette longueur minimale de contour sera garantie par l'adjonction de lignes "
"de contour supplémentaires si besoin.\n"
"Note: si le nombre de ligne de contour est réglé à zéro, cette option n'aura "
"aucun effet. "

#: Cura/util/profile.py:215
#, fuzzy
msgid "Fan full on at height (mm)"
msgstr "Hauteur de la machine (mm)"

#: Cura/util/profile.py:215
#, fuzzy
msgid ""
"The height at which the fan is turned on completely. For the layers below "
"this the fan speed is scaled linearly with the fan off at layer 0."
msgstr ""
"Numéro de couche en parant de zéro (inclus) à laquelle le ventilateur peut "
"être mis en route. La première couche adhère mieux s'il n'est lancé qu'à la "
"couche numéro 2."

#: Cura/util/profile.py:216
msgid "Fan speed min (%)"
msgstr "Vitesse minimale de ventilateur (%)"

#: Cura/util/profile.py:216
msgid ""
"When the fan is turned on, it is enabled at this speed setting. If cool "
"slows down the layer, the fan is adjusted between the min and max speed. "
"Minimal fan speed is used if the layer is not slowed down due to cooling."
msgstr ""
"Vitesse de rotation minimale du ventlateur lorsqu'il est activé. Si l'option "
"de refroidissement impose de ralentir (à cause du temps minimum par couche), "
"la valeur est calculé entre le min et le max. La vitesse minimale est "
"utilisée si la vitesse d'impression n'est pas ralentie."

#: Cura/util/profile.py:217
msgid "Fan speed max (%)"
msgstr "Vitesse maximale de ventilateur (%)"

#: Cura/util/profile.py:217
msgid ""
"When the fan is turned on, it is enabled at this speed setting. If cool "
"slows down the layer, the fan is adjusted between the min and max speed. "
"Maximal fan speed is used if the layer is slowed down due to cooling by more "
"than 200%."
msgstr ""
"Vitesse de rotation minimale du ventlateur lorsqu'il est activé. Si l'option "
"de refroidissement impose de ralentir (temps minimum par couche), la valeur "
"est calculé entre le min et le max. La vitesse maximle est utilisée is le "
"ralentissement de l'impression sur une couche dépasse 200%."

#: Cura/util/profile.py:218
msgid "Minimum speed (mm/s)"
msgstr "Vitesse minimum (mm/s)"

#: Cura/util/profile.py:218
#, fuzzy
msgid ""
"The minimal layer time can cause the print to slow down so much it starts to "
"ooze. The minimal feedrate protects against this. Even if a print gets "
"slowed down it will never be slower than this minimal speed."
msgstr ""
"Le temps minimal par couche peut réduit la vitesse d'impression au point que "
"du filament goutte par la buse par gravité. Cette valeur permet d'imposer "
"une vitesse absolue minimum pour éviter ce problème."

#: Cura/util/profile.py:219
msgid "Cool head lift"
msgstr "Refroidissment tête lévée"

#: Cura/util/profile.py:219
msgid ""
"Lift the head if the minimal speed is hit because of cool slowdown, and wait "
"the extra time so the minimal layer time is always hit."
msgstr ""
"Lève temporairement et éventuellement la tête d'impression si le temps "
"minimum par couche est atteint. Cela permet d'éviter de rester en contact et "
"de fondre la couche déposée tout en garantissant ce temps."

#: Cura/util/profile.py:220 Cura/util/profile.py:221 Cura/util/profile.py:222
msgid "Infill"
msgstr "Remplissage"

#: Cura/util/profile.py:220
msgid "Solid infill top"
msgstr "Dessus plein"

#: Cura/util/profile.py:220
msgid ""
"Create a solid top surface, if set to false the top is filled with the fill "
"percentage. Useful for cups/vases."
msgstr ""
"Crée une surface pleine sur le dessus de l'objet. Ne pas activer l'option "
"est utile pour certains vases ou coupes."

#: Cura/util/profile.py:221
msgid "Solid infill bottom"
msgstr "Dessous plein"

#: Cura/util/profile.py:221
msgid ""
"Create a solid bottom surface, if set to false the bottom is filled with the "
"fill percentage. Useful for buildings."
msgstr ""
"Crée une surface plein sur le dessous. A désactiver pour certains objets "
"comme les batiments. "

#: Cura/util/profile.py:222
msgid "Infill overlap (%)"
msgstr "Taux de recouvrement (%) "

#: Cura/util/profile.py:222
msgid ""
"Amount of overlap between the infill and the walls. There is a slight "
"overlap with the walls and the infill so the walls connect firmly to the "
"infill."
msgstr ""
"Pourcentage de recouvrement entre les parties internes et les parois, afin "
"d'assurer une soudure suffisante pour que les deux soient solidement "
"connectés."

#: Cura/util/profile.py:223
#, fuzzy
msgid "Structure type"
msgstr "Type de support"

#: Cura/util/profile.py:223
msgid ""
"The type of support structure.\n"
"Grid is very strong and can come off in 1 piece, however, sometimes it is "
"too strong.\n"
"Lines are single walled lines that break off one at a time. Which is more "
"work to remove, but as it is less strong it does work better on tricky "
"prints."
msgstr ""

#: Cura/util/profile.py:224
msgid "Overhang angle for support (deg)"
msgstr ""

#: Cura/util/profile.py:224
msgid ""
"The minimal angle that overhangs need to have to get support. With 0 degree "
"being horizontal and 90 degree being vertical."
msgstr ""

#: Cura/util/profile.py:225
msgid "Fill amount (%)"
msgstr "Taux de remplissage (%s)"

#: Cura/util/profile.py:225
#, fuzzy, python-format
msgid ""
"Amount of infill structure in the support material, less material gives "
"weaker support which is easier to remove. 15% seems to be a good average."
msgstr ""
"Taux de remplissage des parties internes pour les zones de supports. Moins "
"de matériaux donne un support plus fin et qu'il est plus facile de retirer. "
"Une valeur de 20% est une bonne moyenne."

#: Cura/util/profile.py:226
msgid "Distance X/Y (mm)"
msgstr "Eloignement X/Y du support (mm)"

#: Cura/util/profile.py:226
msgid ""
"Distance of the support material from the print, in the X/Y directions.\n"
"0.7mm gives a nice distance from the print so the support does not stick to "
"the print."
msgstr ""
"Distance entre le support et l'objet lui-même dans les directions X et Y.\n"
"Une distance de 0.7 mm est une bonne valeur pour que le support ne colle pas "
"trop à l'objet."

#: Cura/util/profile.py:227
msgid "Distance Z (mm)"
msgstr "Eloignement Z du support (mm)"

#: Cura/util/profile.py:227
msgid ""
"Distance from the top/bottom of the support to the print. A small gap here "
"makes it easier to remove the support but makes the print a bit uglier.\n"
"0.15mm gives a good seperation of the support material."
msgstr ""
"Distance entre le haut (et le bas) du support et l'objet. Un petit "
"intervalle permet de le détacher plus facilement mais peut brouiller un peu "
"l'impression.\n"
"Un intervalle 0.15mm est une bonne valeur.  "

#: Cura/util/profile.py:228
msgid "Spiralize the outer contour"
msgstr ""

#: Cura/util/profile.py:228
msgid ""
"Spiralize is smoothing out the Z move of the outer edge. This will create a "
"steady Z increase over the whole print. This feature turns a solid object "
"into a single walled print with a solid bottom."
msgstr ""

#: Cura/util/profile.py:230
msgid "Brim line amount"
msgstr "Nombre de lignes de l'auréole"

#: Cura/util/profile.py:230
msgid ""
"The amount of lines used for a brim, more lines means a larger brim which "
"sticks better, but this also makes your effective print area smaller."
msgstr ""
"Le nombre de lignes utilisée pour l'auréole (brim) collée à l'objet. La zone "
"d'impression possible est réduite d'autant, mais un plus grand nombre "
"augmente l'adhérence de l'objet."

#: Cura/util/profile.py:231
msgid "Extra margin (mm)"
msgstr "Marge supplémentaire pour la grille (mm)"

#: Cura/util/profile.py:231
#, fuzzy
msgid ""
"If the raft is enabled, this is the extra raft area around the object which "
"is also rafted. Increasing this margin will create a stronger raft while "
"using more material and leaving less area for your print."
msgstr ""
"Largeur supplémentaire autour de l'objet lorsqu'une grille est utilisée "
"(raft). Même effet que pour l'auréole (meilleur adhésion, réduction de la "
"surface d'impression)"

#: Cura/util/profile.py:232
msgid "Line spacing (mm)"
msgstr "Espacement des lignes (mm)"

#: Cura/util/profile.py:232
msgid ""
"When you are using the raft this is the distance between the centerlines of "
"the raft line."
msgstr "Distance entre les lignes utilisées par la grille (raft)"

#: Cura/util/profile.py:233
msgid "Base thickness (mm)"
msgstr "Epaisseur de la couche de base (mm)"

#: Cura/util/profile.py:233
msgid ""
"When you are using the raft this is the thickness of the base layer which is "
"put down."
msgstr "Epaisseur de la première couche lorsque la grille est utilisée (raft)"

#: Cura/util/profile.py:234
msgid "Base line width (mm)"
msgstr "Largeur des lignes de base (mm)"

#: Cura/util/profile.py:234
msgid ""
"When you are using the raft this is the width of the base layer lines which "
"are put down."
msgstr "Largeur des lignes utilisées par la première couche de la grille."

#: Cura/util/profile.py:235
msgid "Interface thickness (mm)"
msgstr "Epaisseur de l'interface de grille (mm)"

#: Cura/util/profile.py:235
msgid ""
"When you are using the raft this is the thickness of the interface layer "
"which is put down."
msgstr ""
"Epaisseur de la couche faisant l'interface entre la grille et le dessous de "
"l'objet."

#: Cura/util/profile.py:236
msgid "Interface line width (mm)"
msgstr "Largeur des lignes de l'interface (mm)"

#: Cura/util/profile.py:236
msgid ""
"When you are using the raft this is the width of the interface layer lines "
"which are put down."
msgstr ""
"Largeur des lignes utilisées par la couche d'interface de la grille à "
"l'objet."

#: Cura/util/profile.py:237 Cura/util/profile.py:238 Cura/util/profile.py:239
#: Cura/util/profile.py:240
msgid "Fix horrible"
msgstr "Régler les problèmes horribles"

#: Cura/util/profile.py:237
msgid "Combine everything (Type-A)"
msgstr "Combiner l'ensemble (option A)"

#: Cura/util/profile.py:237 Cura/util/profile.py:238
#, fuzzy
msgid ""
"This expert option adds all parts of the model together. The result is "
"usually that internal cavities disappear. Depending on the model this can be "
"intended or not. Enabling this option is at your own risk. Type-A is "
"dependent on the model normals and tries to keep some internal holes intact. "
"Type-B ignores all internal holes and only keeps the outside shape per layer."
msgstr ""
"Cette option experte combine toutes les parties des modèles. Le résultat "
"bouche toutes les cavités intérieures. Selon le modèle, cela peut être "
"souhaitable ou non. Activer cette option est à vos risques. L'option A "
"utilise les normales des faces et essaye de conserver les cavités. L'option "
"B ignore toutes les cavités et ne conserve sur les formes externes, par "
"couche."

#: Cura/util/profile.py:238
msgid "Combine everything (Type-B)"
msgstr "Combiner l'ensemble (option B)"

#: Cura/util/profile.py:239
msgid "Keep open faces"
msgstr "Conserver les faces ouvertes "

#: Cura/util/profile.py:239
#, fuzzy
msgid ""
"This expert option keeps all the open bits of the model intact. Normally "
"Cura tries to stitch up small holes and remove everything with big holes, "
"but this option keeps bits that are not properly part of anything and just "
"goes with whatever is left. This option is usually not what you want, but it "
"might enable you to slice models otherwise failing to produce proper paths.\n"
"As with all \"Fix horrible\" options, results may vary and use at your own "
"risk."
msgstr ""
"Cette option experte conserve toutes les petits ouvertures du modèle "
"intacts. Habituellement, Cura répare les petits manques dans l'objet et "
"supprime les gros. Cette option désactive ce type de réparation et tente de "
"faire avec. En général cela ne donne pas les résultats escomptés mais peut "
"être utiles pour certains modèles qui ne peuvent pas être sinon préparés.\n"
"De même que l'option \"Régler les problèmes horribles\", les résultats "
"peuvent varier et sont à vos risques."

#: Cura/util/profile.py:240
msgid "Extensive stitching"
msgstr "Fermeture extensive des polygones"

#: Cura/util/profile.py:240
#, fuzzy
msgid ""
"Extensive stitching tries to fix up open holes in the model by closing the "
"hole with touching polygons. This algorthm is quite expensive and could "
"introduce a lot of processing time.\n"
"As with all \"Fix horrible\" options, results may vary and use at your own "
"risk."
msgstr ""
"L'opération consiste à essayer de réparer les trous dans la surface à l'aide "
"des polygones voisins, ce qui peut demander un temps de calcul "
"considérable.\n"
" De même que l'option \"Régler les problèmes horribles\", les résultats "
"peuvent varier et sont à vos risques."

#: Cura/util/profile.py:350
msgid "Save profile on slice"
msgstr "Sauver le profil lors du tranchage"

#: Cura/util/profile.py:350
msgid ""
"When slicing save the profile as [stl_file]_profile.ini next to the model."
msgstr ""
"Sauvegarde le profil sous le nom [stl_file]_profile.ini à côté du fichier "
"STL du modèle. "

#: Cura/util/profile.py:351
msgid "Cost (price/kg)"
msgstr "Prix (prix/kg)"

#: Cura/util/profile.py:351
msgid "Cost of your filament per kg, to estimate the cost of the final print."
msgstr ""
"Prix du filament au kilogramme, pour estimer le coût total de l'objet "
"imprimé."

#: Cura/util/profile.py:352
msgid "Cost (price/m)"
msgstr "Coût (prix/m)"

#: Cura/util/profile.py:352
msgid ""
"Cost of your filament per meter, to estimate the cost of the final print."
msgstr "Prix au mètre pour estimer le prix total de l'object imprimé."

#: Cura/util/profile.py:353
msgid "Auto detect SD card drive"
msgstr "Autodétecter les cartes SD"

#: Cura/util/profile.py:353
msgid ""
"Auto detect the SD card. You can disable this because on some systems "
"external hard-drives or USB sticks are detected as SD card."
msgstr ""
"Permet de détecter automatiquement la présence de cartes SD. On peut vouloir "
"désactiver cette option pour les systèmes qui détectent abusivement les clef "
"USB comme des cartes mémoire."

#: Cura/util/profile.py:354
msgid "Check for updates"
msgstr "Vérifier les mises à jour"

#: Cura/util/profile.py:354
msgid "Check for newer versions of Cura on startup"
msgstr "Vérifie s'il existe des mises à jour au lancement de Cura."

#: Cura/util/profile.py:355
msgid "Send usage statistics"
msgstr "Contribuer aux statistiques"

#: Cura/util/profile.py:355
#, fuzzy
msgid "Submit anonymous usage information to improve future versions of Cura"
msgstr ""
"Envoi de façon anonyme des statistiques d'usage afin d'améliorer les "
"prochaines versions de Cura."

#: Cura/util/profile.py:357
msgid "Density (kg/m3)"
msgstr "Densité (kg/m3)"

#: Cura/util/profile.py:357
msgid ""
"Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
"This value is used to estimate the weight if the filament used for the print."
msgstr ""
"Poid du filament au mètre cube. Généralement 1240 pour le PLA et 1040 pour "
"l'ABS. Cette valeur permet d'estimer le poids total et le prix éventuel de "
"l'objet."

#: Cura/util/profile.py:358
msgid ""
"Change the language in which Cura runs. Switching language requires a "
"restart of Cura"
msgstr ""

#: Cura/util/profile.py:361
msgid "Model colour"
msgstr "Couleur du modèle"

#: Cura/util/profile.py:361
msgid "Display color for first extruder"
msgstr ""

#: Cura/util/profile.py:362
msgid "Model colour (2)"
msgstr "Couleur du modèle (2)"

#: Cura/util/profile.py:362
msgid "Display color for second extruder"
msgstr ""

#: Cura/util/profile.py:363
msgid "Model colour (3)"
msgstr "Couleur du modèle (3)"

#: Cura/util/profile.py:363
msgid "Display color for third extruder"
msgstr ""

#: Cura/util/profile.py:364
msgid "Model colour (4)"
msgstr "Couleur du modèle (4)"

#: Cura/util/profile.py:364
msgid "Display color for forth extruder"
msgstr ""

#: Cura/util/profile.py:365
msgid "Printing window type"
msgstr ""

#: Cura/util/profile.py:365
msgid "Select the interface used for USB printing."
msgstr ""

#: Cura/util/profile.py:377
msgid "Maximum width (mm)"
msgstr "Largeur maximale (mm)"

#: Cura/util/profile.py:377 Cura/util/profile.py:378 Cura/util/profile.py:379
msgid "Size of the machine in mm"
msgstr "Taille de la machine en mm"

#: Cura/util/profile.py:378
msgid "Maximum depth (mm)"
msgstr "Profondeur maximale (mm)"

#: Cura/util/profile.py:379
msgid "Maximum height (mm)"
msgstr "Hauteur maximale (mm)"

#: Cura/util/profile.py:380
#, fuzzy
msgid "Machine center 0,0"
msgstr "Nom de la machine"

#: Cura/util/profile.py:380
msgid ""
"Machines firmware defines the center of the bed as 0,0 instead of the front "
"left corner."
msgstr ""

#: Cura/util/profile.py:381
msgid "Build area shape"
msgstr ""

#: Cura/util/profile.py:381
msgid "The shape of machine build area."
msgstr ""

#: Cura/util/profile.py:383
msgid ""
"If you have an heated bed, this enabled heated bed settings (requires "
"restart)"
msgstr ""
"SI vous avez un lit chauffant, cela active les options correspondantes "
"(redémarrage requis de Cura)."

#: Cura/util/profile.py:384
msgid "GCode Flavor"
msgstr "Format de GCode"

#: Cura/util/profile.py:384
#, fuzzy
msgid ""
"Flavor of generated GCode.\n"
"RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
"UltiGCode is a variation of the RepRap GCode which puts more settings in the "
"machine instead of the slicer.\n"
"MakerBot GCode has a few changes in the way GCode is generated, but still "
"requires MakerWare to generate to X3G."
msgstr ""
"Format de GCode généré pour l'imprimante.\n"
"Le format RepRap est un format normal 5D fonctionnant avec les "
"micrologiciels basés sur Marlin/Sprinter.\n"
"UltiGCode en est une variation qui place davantage de réglages du côté de la "
"machine plutôt que celui du trancheur (slicer).  "

#: Cura/util/profile.py:385
msgid "Extruder count"
msgstr "Nombre d'extrudeurs"

#: Cura/util/profile.py:385
msgid "Amount of extruders in your machine."
msgstr "Le nombre de têtes d'extrusions installées sur votre machine."

#: Cura/util/profile.py:386 Cura/util/profile.py:388 Cura/util/profile.py:390
msgid "Offset X"
msgstr "Décalage X"

#: Cura/util/profile.py:386 Cura/util/profile.py:387
msgid "The offset of your secondary extruder compared to the primary."
msgstr "Le décalage en X du second extrudeur par rapport au premier."

#: Cura/util/profile.py:387 Cura/util/profile.py:389 Cura/util/profile.py:391
msgid "Offset Y"
msgstr "Décalage Y"

#: Cura/util/profile.py:388 Cura/util/profile.py:389
msgid "The offset of your tertiary extruder compared to the primary."
msgstr "Le décalage en X du troisième extrudeur par rapport au premier."

#: Cura/util/profile.py:390 Cura/util/profile.py:391
msgid "The offset of your forth extruder compared to the primary."
msgstr "Le décalage en X du quatrième extrudeur par rapport au premier."

#: Cura/util/profile.py:392
msgid "E-Steps per 1mm filament"
msgstr "Nombre de Pas/E  pour 1mm de filament"

#: Cura/util/profile.py:392
msgid ""
"Amount of steps per mm filament extrusion. If set to 0 then this value is "
"ignored and the value in your firmware is used."
msgstr ""
"Il s'agit du nombre de pas que doit effcetuer le moteur pas à pas "
"d'entraînement du filament pour le faire avancer de 1mm.\n"
"Si ca valeur est zéro, alors c'est la valeur indiquée dans le micrologiciel "
"de l'imprimante qui sera utilisée."

#: Cura/util/profile.py:393
msgid "Serial port"
msgstr "Port série"

#: Cura/util/profile.py:393
msgid "Serial port to use for communication with the printer"
msgstr "Le port série utilisé pour la communication avec l'imprimante."

#: Cura/util/profile.py:395
msgid "Baudrate"
msgstr "Bauds"

#: Cura/util/profile.py:395
msgid ""
"Speed of the serial port communication\n"
"Needs to match your firmware settings\n"
"Common values are 250000, 115200, 57600"
msgstr ""
"Vitesse en bauds de la communication avec l'imprimante.\n"
"Elle doit correspondre à celle de votre micrologiciel\n"
"Les valeurs les plus courantes sont 250000, 115200 ou 57600"

#: Cura/util/profile.py:398
msgid "Head size towards X min (mm)"
msgstr "Taille de la tête vers le X min (mm)"

#: Cura/util/profile.py:398
msgid ""
"The head size when printing multiple objects, measured from the tip of the "
"nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
"is on the left side."
msgstr ""
"La taille de la tête, utile pour le placement et l'impression de plusieurs "
"objet  afin d'éviter de les heurter.\n"
"La distance est donnée depuis la buse vers l'extérieur de la tête (75mm pour "
"une Ultimaker avec le ventilateur à gauche)."

#: Cura/util/profile.py:399
msgid "Head size towards Y min (mm)"
msgstr "Taille de la tête vers le Y min (mm)"

#: Cura/util/profile.py:399 Cura/util/profile.py:400
msgid ""
"The head size when printing multiple objects, measured from the tip of the "
"nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
"is on the left side."
msgstr ""
"La taille de la tête, utile pour le placement et l'impression de plusieurs "
"objet  afin d'éviter de les heurter.\n"
"La distance est donnée depuis la buse vers l'extérieur de la tête (18mm pour "
"une Ultimaker avec le ventilateur à gauche)."

#: Cura/util/profile.py:400
msgid "Head size towards X max (mm)"
msgstr "Taille de la tête vers le X max (mm)"

#: Cura/util/profile.py:401
msgid "Head size towards Y max (mm)"
msgstr "Taille de la tête vers le Y max (mm)"

#: Cura/util/profile.py:401
msgid ""
"The head size when printing multiple objects, measured from the tip of the "
"nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
"is on the left side."
msgstr ""
"La taille de la tête, utile pour le placement et l'impression de plusieurs "
"objet  afin d'éviter de les heurter.\n"
"La distance est donnée depuis la buse vers l'extérieur de la tête (35mm pour "
"une Ultimaker avec le ventilateur à gauche)."

#: Cura/util/profile.py:402
msgid "Printer gantry height (mm)"
msgstr "Hauteur de la tête (mm)"

#: Cura/util/profile.py:402
msgid ""
"The height of the gantry holding up the printer head. If an object is higher "
"then this then you cannot print multiple objects one for one. 60mm for an "
"Ultimaker."
msgstr ""
"La hauteur du bas de la colonne d'impression (structure qui tient la tête "
"d'impression).\n"
"Lorsqu'un objet est plus haut que cette valeur, il ne sera pas possible "
"d'imprimer plusieurs objets l'un après l'autre (il seront imprimés en "
"simultanés). 60mm pour une Ultimaker."

#: Cura/util/profile.py:404
#, fuzzy, python-format
msgid "More flow than 150% is rare and usually not recommended."
msgstr "Un débit supérieur à 150% est rare et non recommandé."

#: Cura/util/profile.py:405
#, fuzzy, python-format
msgid "Less flow than 50% is rare and usually not recommended."
msgstr "Un débit supérieur à 50% est rare et non recommandé."

#: Cura/util/profile.py:406
#, python-format
msgid ""
"Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
"are not recommended."
msgstr ""
"Des couches plus épaisses que %.2fmm (80%% du diamètre de la buse) donnent "
"généralement de mauvais résultats et ne sont pas recommandés."

#: Cura/util/profile.py:408
msgid ""
"It is highly unlikely that your machine can achieve a printing speed above "
"150mm/s"
msgstr ""
"Il est fort peu probable que votre machine puisse imprimer au delà de 150mm/"
"s."

#: Cura/util/profile.py:410 Cura/util/profile.py:411 Cura/util/profile.py:412
#: Cura/util/profile.py:413
msgid "Temperatures above 260C could damage your machine, be careful!"
msgstr ""
"Une température supérieure à 260C peut endommager votre machine. Soyez "
"prudents!"

#: Cura/util/profile.py:414 Cura/util/profile.py:415 Cura/util/profile.py:416
#: Cura/util/profile.py:417
msgid ""
"Are you sure your filament is that thick? Normal filament is around 3mm or "
"1.75mm."
msgstr ""
"Etes-vous certain que votre filament soit si épais? Les filaments habituels "
"ont des diamètres aux alentours de 3mm ou 1.75mm."

#: Cura/util/profile.py:418
msgid ""
"It is highly unlikely that your machine can achieve a travel speed above "
"300mm/s"
msgstr ""
"Il est fort peu probable que votre machine puisse atteindre des vitesses au "
"delà de 300mm/s"

#: Cura/util/profile.py:419
#, python-format
msgid ""
"A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
"results and is not recommended."
msgstr ""
"Une couche initiale plus épaisses que  %.2fmm (3/4 du diamètre de la buse) "
"donne généralement de mauvais résultats et n'est pas recommandée."

#~ msgid "* Configure Cura for your machine"
#~ msgstr "* Configurer Cura pour votre machine"

#~ msgid "* Optionally upgrade your firmware"
#~ msgstr ""
#~ "* Optionnellement mettre à jour le logiciel embarqué (micrologiciel)"

#~ msgid "* Optionally check if your machine is working safely"
#~ msgstr "* Optionnellement vérifier si votre machine fonctionne correctement"

#~ msgid "* Optionally level your printer bed"
#~ msgstr "* Optionnellement mettre votre lit à niveau "

#~ msgid "Add new machine..."
#~ msgstr "Ajouter une nouvelle machine..."

#~ msgid "Statistics"
#~ msgstr "Statistiques"

#~ msgid ""
#~ "Filament: ####.##m #.##g\n"
#~ "Estimated print time: #####:##\n"
#~ "Machine state:\n"
#~ "Detecting baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
#~ msgstr ""
#~ "Filament: ####.##m #.##g\n"
#~ "Temps d'impression estimé: #####:##\n"
#~ "Etat de la machine:\n"
#~ "Détectio du baudrateXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"

#~ msgid "BedTemp:"
#~ msgstr "TempLit:"

#~ msgid "Temp:"
#~ msgstr "Temp:"

#~ msgid "Jog"
#~ msgstr "Mouvement"

#~ msgid "Outer wall:"
#~ msgstr "Parois externes:"

#~ msgid "Inner wall:"
#~ msgstr "Parois internes:"

#~ msgid "Fill:"
#~ msgstr "Remplissage:"

#~ msgid "Support:"
#~ msgstr "SUpport:"

#~ msgid "Enable timelapse movie recording"
#~ msgstr "Activer l'enregistrement de film image par image"

#~ msgid "Show preview"
#~ msgstr "Prévisualiser"

#~ msgid "Camera"
#~ msgstr "Caméra"

#~ msgid "Resume"
#~ msgstr "Reprendre"

#~ msgid "Loading gcode...\n"
#~ msgstr "Chargement du GCode...\n"

#~ msgid "Filament: %(amount).2fm %(weight).2fg\n"
#~ msgstr "Filament: %(amount).2fm %(weight).2fg\n"

#~ msgid "Filament cost: %s\n"
#~ msgstr "Coût de filament: %s\n"

#~ msgid "Cura - Batch run"
#~ msgstr "Cura - Lot groupé"

#~ msgid "Add"
#~ msgstr "Ajouter"

#~ msgid "Remove"
#~ msgstr "Retirer"

#~ msgid "Prepare all"
#~ msgstr "Préparer l'ensemble"

#~ msgid "Open file to batch prepare"
#~ msgstr "Ouvrir un fichier à péparer en lot"

#~ msgid "Building: %d                           "
#~ msgstr "Construction: %d"

#~ msgid "Done: 0/%d                           "
#~ msgstr "Effectué: 0/%d"

#~ msgid "Abort"
#~ msgstr "Interrompre"

#~ msgid "Close"
#~ msgstr "Fermer"

#~ msgid "Build: %d models"
#~ msgstr "Construction: %d modèles"

#~ msgid ""
#~ "\n"
#~ "Slicing took: %(hours)02d:%(minutes)02d"
#~ msgstr ""
#~ "\n"
#~ "Le trancheur a pris: %(hours)02d:%(minutes)02d"

#~ msgid "Building: [%(index)d/%(size)d]"
#~ msgstr "Construction: [%(index)d/%(size)d]"

#~ msgid "Aborted by user."
#~ msgstr "Interrompu par l'utilisateur."

#~ msgid "Done %(index)d/%(size)d"
#~ msgstr "Effectués %(index)d/%(size)d"

#~ msgid "To SDCard"
#~ msgstr "Vers carte SD"

#~ msgid "Fan on layer number"
#~ msgstr "Ventilateur retardé"