Remove letshelp-certbot (#7761)

* remove references to letshelp

* remove letshelp files

* Remove line continuation

Co-authored-by: ohemorange <ebportnoy@gmail.com>

32 files changed, 6 insertions, 1714 deletions

diff --git a/certbot/docs/packaging.rst b/certbot/docs/packaging.rst
index 7b0b1d41a..d2a94dbe7 100644
--- a/certbot/docs/packaging.rst
+++ b/certbot/docs/packaging.rst
@@ -38,7 +38,7 @@ Notes for package maintainers
 
 0. Please use our tagged releases, not ``master``!
 
-1. Do not package ``certbot-compatibility-test`` or ``letshelp-certbot`` - it's only used internally.
+1. Do not package ``certbot-compatibility-test`` as it's only used internally.
 
 2. To run tests on our packages, you should use ``python setup.py test``. Doing things like running ``pytest`` directly on our package files may not work because Certbot relies on setuptools to register and find its plugins.
 
diff --git a/letshelp-certbot/LICENSE.txt b/letshelp-certbot/LICENSE.txt
deleted file mode 100644
index 981c46c9f..000000000
--- a/letshelp-certbot/LICENSE.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-   Copyright 2015 Electronic Frontier Foundation and others
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
diff --git a/letshelp-certbot/MANIFEST.in b/letshelp-certbot/MANIFEST.in
deleted file mode 100644
index 623392f28..000000000
--- a/letshelp-certbot/MANIFEST.in
+++ /dev/null
@@ -1,4 +0,0 @@
-include LICENSE.txt
-include README.rst
-recursive-include docs *
-recursive-include letshelp_certbot/testdata *
diff --git a/letshelp-certbot/README.rst b/letshelp-certbot/README.rst
deleted file mode 100644
index bbe2f2570..000000000
--- a/letshelp-certbot/README.rst
+++ /dev/null
@@ -1 +0,0 @@
-Let's help Certbot client
diff --git a/letshelp-certbot/docs/.gitignore b/letshelp-certbot/docs/.gitignore
deleted file mode 100644
index ba65b13af..000000000
--- a/letshelp-certbot/docs/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/_build/
diff --git a/letshelp-certbot/docs/Makefile b/letshelp-certbot/docs/Makefile
deleted file mode 100644
index 4b392ab8d..000000000
--- a/letshelp-certbot/docs/Makefile
+++ /dev/null
@@ -1,192 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS    =
-SPHINXBUILD   = sphinx-build
-PAPER         =
-BUILDDIR      = _build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4     = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest coverage gettext
-
-help:
-	@echo "Please use \`make <target>' where <target> is one of"
-	@echo "  html       to make standalone HTML files"
-	@echo "  dirhtml    to make HTML files named index.html in directories"
-	@echo "  singlehtml to make a single large HTML file"
-	@echo "  pickle     to make pickle files"
-	@echo "  json       to make JSON files"
-	@echo "  htmlhelp   to make HTML files and a HTML help project"
-	@echo "  qthelp     to make HTML files and a qthelp project"
-	@echo "  applehelp  to make an Apple Help Book"
-	@echo "  devhelp    to make HTML files and a Devhelp project"
-	@echo "  epub       to make an epub"
-	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
-	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
-	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
-	@echo "  text       to make text files"
-	@echo "  man        to make manual pages"
-	@echo "  texinfo    to make Texinfo files"
-	@echo "  info       to make Texinfo files and run them through makeinfo"
-	@echo "  gettext    to make PO message catalogs"
-	@echo "  changes    to make an overview of all changed/added/deprecated items"
-	@echo "  xml        to make Docutils-native XML files"
-	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
-	@echo "  linkcheck  to check all external links for integrity"
-	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
-	@echo "  coverage   to run coverage check of the documentation (if enabled)"
-
-clean:
-	rm -rf $(BUILDDIR)/*
-
-html:
-	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
-	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
-	@echo
-	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
-	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
-	@echo
-	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
-	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
-	@echo
-	@echo "Build finished; now you can process the pickle files."
-
-json:
-	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
-	@echo
-	@echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
-	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
-	@echo
-	@echo "Build finished; now you can run HTML Help Workshop with the" \
-	      ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
-	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
-	@echo
-	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
-	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
-	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/letshelp-certbot.qhcp"
-	@echo "To view the help file:"
-	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/letshelp-certbot.qhc"
-
-applehelp:
-	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
-	@echo
-	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
-	@echo "N.B. You won't be able to view it unless you put it in" \
-	      "~/Library/Documentation/Help or install it in your application" \
-	      "bundle."
-
-devhelp:
-	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
-	@echo
-	@echo "Build finished."
-	@echo "To view the help file:"
-	@echo "# mkdir -p $$HOME/.local/share/devhelp/letshelp-certbot"
-	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/letshelp-certbot"
-	@echo "# devhelp"
-
-epub:
-	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
-	@echo
-	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo
-	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
-	@echo "Run \`make' in that directory to run these through (pdf)latex" \
-	      "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through pdflatex..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
-	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
-	@echo "Running LaTeX files through platex and dvipdfmx..."
-	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
-	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
-	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
-	@echo
-	@echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
-	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
-	@echo
-	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo
-	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
-	@echo "Run \`make' in that directory to run these through makeinfo" \
-	      "(use \`make info' here to do that automatically)."
-
-info:
-	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
-	@echo "Running Texinfo files through makeinfo..."
-	make -C $(BUILDDIR)/texinfo info
-	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
-	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
-	@echo
-	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
-	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
-	@echo
-	@echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
-	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
-	@echo
-	@echo "Link check complete; look for any errors in the above output " \
-	      "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
-	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
-	@echo "Testing of doctests in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/doctest/output.txt."
-
-coverage:
-	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
-	@echo "Testing of coverage in the sources finished, look at the " \
-	      "results in $(BUILDDIR)/coverage/python.txt."
-
-xml:
-	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
-	@echo
-	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
-	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
-	@echo
-	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/letshelp-certbot/docs/_static/.gitignore b/letshelp-certbot/docs/_static/.gitignore
deleted file mode 100644
index e69de29bb..000000000
--- a/letshelp-certbot/docs/_static/.gitignore
+++ /dev/null
diff --git a/letshelp-certbot/docs/_templates/.gitignore b/letshelp-certbot/docs/_templates/.gitignore
deleted file mode 100644
index e69de29bb..000000000
--- a/letshelp-certbot/docs/_templates/.gitignore
+++ /dev/null
diff --git a/letshelp-certbot/docs/api.rst b/letshelp-certbot/docs/api.rst
deleted file mode 100644
index 8668ec5d8..000000000
--- a/letshelp-certbot/docs/api.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-=================
-API Documentation
-=================
-
-.. toctree::
-   :glob:
-
-   api/**
diff --git a/letshelp-certbot/docs/api/index.rst b/letshelp-certbot/docs/api/index.rst
deleted file mode 100644
index 5ced5f501..000000000
--- a/letshelp-certbot/docs/api/index.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-:mod:`letshelp_certbot`
----------------------------
-
-.. automodule:: letshelp_certbot
-   :members:
-
-:mod:`letshelp_certbot.apache`
-==================================
-
-.. automodule:: letshelp_certbot.apache
-   :members:
diff --git a/letshelp-certbot/docs/conf.py b/letshelp-certbot/docs/conf.py
deleted file mode 100644
index b4289a345..000000000
--- a/letshelp-certbot/docs/conf.py
+++ /dev/null
@@ -1,310 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-# letshelp-certbot documentation build configuration file, created by
-# sphinx-quickstart on Sun Oct 18 13:40:19 2015.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import os
-import shlex
-import sys
-
-here = os.path.abspath(os.path.dirname(__file__))
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-sys.path.insert(0, os.path.abspath(os.path.join(here, '..')))
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = [
-    'sphinx.ext.autodoc',
-    'sphinx.ext.intersphinx',
-    'sphinx.ext.todo',
-    'sphinx.ext.coverage',
-    'sphinx.ext.viewcode',
-]
-
-autodoc_member_order = 'bysource'
-autodoc_default_flags = ['show-inheritance']
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix(es) of source filenames.
-# You can specify multiple suffix as a list of string:
-# source_suffix = ['.rst', '.md']
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = u'letshelp-certbot'
-copyright = u'2014-2015, Let\'s Encrypt Project'
-author = u'Certbot Project'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '0'
-# The full version, including alpha/beta/rc tags.
-release = '0'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#
-# This is also used if you do content translation via gettext catalogs.
-# Usually you set "language" from the command line for these cases.
-language = 'en'
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = ['_build']
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-default_role = 'py:obj'
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
-
-# If true, `todo` and `todoList` produce output, else they produce nothing.
-todo_include_todos = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages.  See the documentation for
-# a list of builtin themes.
-
-# http://docs.readthedocs.org/en/latest/theme.html#how-do-i-use-this-locally-and-on-read-the-docs
-# on_rtd is whether we are on readthedocs.org
-on_rtd = os.environ.get('READTHEDOCS', None) == 'True'
-if not on_rtd:  # only import and set the theme if we're building docs locally
-    import sphinx_rtd_theme
-    html_theme = 'sphinx_rtd_theme'
-    html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
-# otherwise, readthedocs.org uses their theme by default, so no need to specify it
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
-
-# Language to be used for generating the HTML full-text search index.
-# Sphinx supports the following languages:
-#   'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja'
-#   'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr'
-#html_search_language = 'en'
-
-# A dictionary with options for the search language support, empty by default.
-# Now only 'ja' uses this config value
-#html_search_options = {'type': 'default'}
-
-# The name of a javascript file (relative to the configuration directory) that
-# implements a search results scorer. If empty, the default will be used.
-#html_search_scorer = 'scorer.js'
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'letshelp-certbotdoc'
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-    # The paper size ('letterpaper' or 'a4paper').
-    #'papersize': 'letterpaper',
-
-    # The font size ('10pt', '11pt' or '12pt').
-    #'pointsize': '10pt',
-
-    # Additional stuff for the LaTeX preamble.
-    #'preamble': '',
-
-    # Latex figure (float) alignment
-    #'figure_align': 'htbp',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-#  author, documentclass [howto, manual, or own class]).
-latex_documents = [
-    (master_doc, 'letshelp-certbot.tex', u'letshelp-certbot Documentation',
-     u'Certbot Project', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
-    (master_doc, 'letshelp-certbot', u'letshelp-certbot Documentation',
-     [author], 1)
-]
-
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-#  dir menu entry, description, category)
-texinfo_documents = [
-    (master_doc, 'letshelp-certbot', u'letshelp-certbot Documentation',
-     author, 'letshelp-certbot', 'One line description of project.',
-     'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
-
-
-intersphinx_mapping = {
-    'python': ('https://docs.python.org/', None),
-    'acme': ('https://acme-python.readthedocs.org/en/latest/', None),
-    'certbot': ('https://certbot.eff.org/docs/', None),
-}
diff --git a/letshelp-certbot/docs/index.rst b/letshelp-certbot/docs/index.rst
deleted file mode 100644
index 678d9be2e..000000000
--- a/letshelp-certbot/docs/index.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-.. letshelp-certbot documentation master file, created by
-   sphinx-quickstart on Sun Oct 18 13:40:19 2015.
-   You can adapt this file completely to your liking, but it should at least
-   contain the root `toctree` directive.
-
-Welcome to letshelp-certbot's documentation!
-================================================
-
-Contents:
-
-.. toctree::
-   :maxdepth: 2
-
-
-.. toctree::
-   :maxdepth: 1
-
-   api
-
-
-Indices and tables
-==================
-
-* :ref:`genindex`
-* :ref:`modindex`
-* :ref:`search`
-
diff --git a/letshelp-certbot/docs/make.bat b/letshelp-certbot/docs/make.bat
deleted file mode 100644
index 0229b4f69..000000000
--- a/letshelp-certbot/docs/make.bat
+++ /dev/null
@@ -1,263 +0,0 @@
-@ECHO OFF
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
-	set SPHINXBUILD=sphinx-build
-)
-set BUILDDIR=_build
-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
-set I18NSPHINXOPTS=%SPHINXOPTS% .
-if NOT "%PAPER%" == "" (
-	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
-	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
-)
-
-if "%1" == "" goto help
-
-if "%1" == "help" (
-	:help
-	echo.Please use `make ^<target^>` where ^<target^> is one of
-	echo.  html       to make standalone HTML files
-	echo.  dirhtml    to make HTML files named index.html in directories
-	echo.  singlehtml to make a single large HTML file
-	echo.  pickle     to make pickle files
-	echo.  json       to make JSON files
-	echo.  htmlhelp   to make HTML files and a HTML help project
-	echo.  qthelp     to make HTML files and a qthelp project
-	echo.  devhelp    to make HTML files and a Devhelp project
-	echo.  epub       to make an epub
-	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
-	echo.  text       to make text files
-	echo.  man        to make manual pages
-	echo.  texinfo    to make Texinfo files
-	echo.  gettext    to make PO message catalogs
-	echo.  changes    to make an overview over all changed/added/deprecated items
-	echo.  xml        to make Docutils-native XML files
-	echo.  pseudoxml  to make pseudoxml-XML files for display purposes
-	echo.  linkcheck  to check all external links for integrity
-	echo.  doctest    to run all doctests embedded in the documentation if enabled
-	echo.  coverage   to run coverage check of the documentation if enabled
-	goto end
-)
-
-if "%1" == "clean" (
-	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
-	del /q /s %BUILDDIR%\*
-	goto end
-)
-
-
-REM Check if sphinx-build is available and fallback to Python version if any
-%SPHINXBUILD% 2> nul
-if errorlevel 9009 goto sphinx_python
-goto sphinx_ok
-
-:sphinx_python
-
-set SPHINXBUILD=python -m sphinx.__init__
-%SPHINXBUILD% 2> nul
-if errorlevel 9009 (
-	echo.
-	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
-	echo.installed, then set the SPHINXBUILD environment variable to point
-	echo.to the full path of the 'sphinx-build' executable. Alternatively you
-	echo.may add the Sphinx directory to PATH.
-	echo.
-	echo.If you don't have Sphinx installed, grab it from
-	echo.http://sphinx-doc.org/
-	exit /b 1
-)
-
-:sphinx_ok
-
-
-if "%1" == "html" (
-	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/html.
-	goto end
-)
-
-if "%1" == "dirhtml" (
-	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
-	goto end
-)
-
-if "%1" == "singlehtml" (
-	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
-	goto end
-)
-
-if "%1" == "pickle" (
-	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the pickle files.
-	goto end
-)
-
-if "%1" == "json" (
-	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can process the JSON files.
-	goto end
-)
-
-if "%1" == "htmlhelp" (
-	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run HTML Help Workshop with the ^
-.hhp project file in %BUILDDIR%/htmlhelp.
-	goto end
-)
-
-if "%1" == "qthelp" (
-	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; now you can run "qcollectiongenerator" with the ^
-.qhcp project file in %BUILDDIR%/qthelp, like this:
-	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\letshelp-certbot.qhcp
-	echo.To view the help file:
-	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\letshelp-certbot.ghc
-	goto end
-)
-
-if "%1" == "devhelp" (
-	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished.
-	goto end
-)
-
-if "%1" == "epub" (
-	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The epub file is in %BUILDDIR%/epub.
-	goto end
-)
-
-if "%1" == "latex" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdf" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf
-	cd %~dp0
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "latexpdfja" (
-	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
-	cd %BUILDDIR%/latex
-	make all-pdf-ja
-	cd %~dp0
-	echo.
-	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
-	goto end
-)
-
-if "%1" == "text" (
-	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The text files are in %BUILDDIR%/text.
-	goto end
-)
-
-if "%1" == "man" (
-	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The manual pages are in %BUILDDIR%/man.
-	goto end
-)
-
-if "%1" == "texinfo" (
-	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
-	goto end
-)
-
-if "%1" == "gettext" (
-	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
-	goto end
-)
-
-if "%1" == "changes" (
-	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.The overview file is in %BUILDDIR%/changes.
-	goto end
-)
-
-if "%1" == "linkcheck" (
-	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Link check complete; look for any errors in the above output ^
-or in %BUILDDIR%/linkcheck/output.txt.
-	goto end
-)
-
-if "%1" == "doctest" (
-	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Testing of doctests in the sources finished, look at the ^
-results in %BUILDDIR%/doctest/output.txt.
-	goto end
-)
-
-if "%1" == "coverage" (
-	%SPHINXBUILD% -b coverage %ALLSPHINXOPTS% %BUILDDIR%/coverage
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Testing of coverage in the sources finished, look at the ^
-results in %BUILDDIR%/coverage/python.txt.
-	goto end
-)
-
-if "%1" == "xml" (
-	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The XML files are in %BUILDDIR%/xml.
-	goto end
-)
-
-if "%1" == "pseudoxml" (
-	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
-	if errorlevel 1 exit /b 1
-	echo.
-	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
-	goto end
-)
-
-:end
diff --git a/letshelp-certbot/letshelp_certbot/__init__.py b/letshelp-certbot/letshelp_certbot/__init__.py
deleted file mode 100644
index 6882a19d4..000000000
--- a/letshelp-certbot/letshelp_certbot/__init__.py
+++ /dev/null
@@ -1 +0,0 @@
-"""Tools for submitting server configurations"""
diff --git a/letshelp-certbot/letshelp_certbot/apache.py b/letshelp-certbot/letshelp_certbot/apache.py
deleted file mode 100755
index a5947399a..000000000
--- a/letshelp-certbot/letshelp_certbot/apache.py
+++ /dev/null
@@ -1,314 +0,0 @@
-#!/usr/bin/env python
-"""Certbot Apache configuration submission script"""
-
-from __future__ import print_function
-
-import argparse
-import atexit
-import os
-import re
-import shutil
-import subprocess
-import sys
-import tarfile
-import tempfile
-import textwrap
-
-import six
-
-from letshelp_certbot.magic_typing import List
-
-_DESCRIPTION = """
-Let's Help is a simple script you can run to help out the Certbot
-project. Since Certbot will support automatically configuring HTTPS on
-many servers, we want to test this functionality on as many configurations as
-possible. This script will create a sanitized copy of your Apache
-configuration, notifying you of the files that have been selected. If (and only
-if) you approve this selection, these files will be sent to the Certbot
-developers.
-
-"""
-
-
-_NO_APACHECTL = """
-Unable to find `apachectl` which is required for this script to work. If it is
-installed, please run this script again with the --apache-ctl command line
-argument and the path to the binary.
-
-"""
-
-
-# Keywords likely to be found in filenames of sensitive files
-_SENSITIVE_FILENAME_REGEX = re.compile(r"^(?!.*proxy_fdpass).*pass.*$|private|"
-                                       r"secret|^(?!.*certbot).*cert.*$|crt|"
-                                       r"key|rsa|dsa|pw|\.pem|\.der|\.p12|"
-                                       r"\.pfx|\.p7b")
-
-
-def make_and_verify_selection(server_root, temp_dir):
-    """Copies server_root to temp_dir and verifies selection with the user
-
-    :param str server_root: Path to the Apache server root
-    :param str temp_dir: Path to the temporary directory to copy files to
-
-    """
-    copied_files, copied_dirs = copy_config(server_root, temp_dir)
-
-    print(textwrap.fill("A secure copy of the files that have been selected "
-                        "for submission has been created under {0}. All "
-                        "comments have been removed and the files are only "
-                        "accessible by the current user. A list of the files "
-                        "that have been included is shown below. Please make "
-                        "sure that this selection does not contain private "
-                        "keys, passwords, or any other sensitive "
-                        "information.".format(temp_dir)))
-    print("\nFiles:")
-    for copied_file in copied_files:
-        print(copied_file)
-    print("Directories (including all contained files):")
-    for copied_dir in copied_dirs:
-        print(copied_dir)
-
-    sys.stdout.write("\nIs it safe to submit these files? ")
-    while True:
-        ans = six.moves.input("(Y)es/(N)o: ").lower()
-        if ans.startswith("y"):
-            return
-        if ans.startswith("n"):
-            sys.exit("Your files were not submitted")
-
-
-def copy_config(server_root, temp_dir):
-    """Safely copies server_root to temp_dir and returns copied files
-
-    :param str server_root: Absolute path to the Apache server root
-    :param str temp_dir: Path to the temporary directory to copy files to
-
-    :returns: List of copied files and a list of leaf directories where
-        all contained files were copied
-    :rtype: `tuple` of `list` of `str`
-
-    """
-    copied_files = [] # type: List[str]
-    copied_dirs = [] # type: List[str]
-    dir_len = len(os.path.dirname(server_root))
-
-    for config_path, config_dirs, config_files in os.walk(server_root):
-        temp_path = os.path.join(temp_dir, config_path[dir_len + 1:])
-        os.mkdir(temp_path)
-
-        copied_all = True
-        copied_files_in_current_dir = []
-        for config_file in config_files:
-            config_file_path = os.path.join(config_path, config_file)
-            temp_file_path = os.path.join(temp_path, config_file)
-            if os.path.islink(config_file_path):
-                os.symlink(os.readlink(config_file_path), temp_file_path)
-            elif safe_config_file(config_file_path):
-                copy_file_without_comments(config_file_path, temp_file_path)
-                copied_files_in_current_dir.append(config_file_path)
-            else:
-                copied_all = False
-
-        # If copied all files in leaf directory
-        if copied_all and not config_dirs:
-            copied_dirs.append(config_path)
-        else:
-            copied_files += copied_files_in_current_dir
-
-    return copied_files, copied_dirs
-
-
-def copy_file_without_comments(source, destination):
-    """Copies source to destination, removing comments
-
-    :param str source: Path to the file to be copied
-    :param str destination: Path where source should be copied to
-
-    """
-    with open(source, "r") as infile:
-        with open(destination, "w") as outfile:
-            for line in infile:
-                if not (line.isspace() or line.lstrip().startswith("#")):
-                    outfile.write(line)
-
-
-def safe_config_file(config_file):
-    """Returns True if config_file can be safely copied
-
-    :param str config_file: Path to an Apache configuration file
-
-    :returns: True if config_file can be safely copied
-    :rtype: bool
-
-    """
-    config_file_lower = config_file.lower()
-    if _SENSITIVE_FILENAME_REGEX.search(config_file_lower):
-        return False
-
-    proc = subprocess.Popen(["file", config_file],
-                            stdout=subprocess.PIPE, stderr=subprocess.PIPE,
-                            universal_newlines=True)
-    file_output, _ = proc.communicate()
-
-    if "ASCII" in file_output:
-        possible_password_file = empty_or_all_comments = True
-        with open(config_file) as config_fd:
-            for line in config_fd:
-                if not (line.isspace() or line.lstrip().startswith("#")):
-                    empty_or_all_comments = False
-                    if line.startswith("-----BEGIN"):
-                        return False
-                    if ":" not in line:
-                        possible_password_file = False
-        # If file isn't empty or commented out and could be a password file,
-        # don't include it in selection. It is safe to include the file if
-        # it consists solely of comments because comments are removed before
-        # submission.
-        return empty_or_all_comments or not possible_password_file
-
-    return False
-
-
-def setup_tempdir(args):
-    """Creates a temporary directory and necessary files for config
-
-    :param argparse.Namespace args: Parsed command line arguments
-
-    :returns: Path to temporary directory
-    :rtype: str
-
-    """
-    tempdir = tempfile.mkdtemp()
-
-    with open(os.path.join(tempdir, "config_file"), "w") as config_fd:
-        config_fd.write(args.config_file + "\n")
-
-    proc = subprocess.Popen([args.apache_ctl, "-v"],
-                            stdout=subprocess.PIPE, stderr=subprocess.PIPE,
-                            universal_newlines=True)
-    with open(os.path.join(tempdir, "version"), "w") as version_fd:
-        version_fd.write(proc.communicate()[0])
-
-    proc = subprocess.Popen([args.apache_ctl, "-d", args.server_root, "-f",
-                             args.config_file, "-M"],
-                            stdout=subprocess.PIPE, stderr=subprocess.PIPE,
-                            universal_newlines=True)
-    with open(os.path.join(tempdir, "modules"), "w") as modules_fd:
-        modules_fd.write(proc.communicate()[0])
-
-    proc = subprocess.Popen([args.apache_ctl, "-d", args.server_root, "-f",
-                             args.config_file, "-t", "-D", "DUMP_VHOSTS"],
-                            stdout=subprocess.PIPE, stderr=subprocess.PIPE,
-                            universal_newlines=True)
-    with open(os.path.join(tempdir, "vhosts"), "w") as vhosts_fd:
-        vhosts_fd.write(proc.communicate()[0])
-
-    return tempdir
-
-
-def verify_config(args):
-    """Verifies server_root and config_file specify a valid config
-
-    :param argparse.Namespace args: Parsed command line arguments
-
-    """
-    with open(os.devnull, "w") as devnull:
-        try:
-            subprocess.check_call([args.apache_ctl, "-d", args.server_root,
-                                   "-f", args.config_file, "-t"],
-                                  stdout=devnull, stderr=subprocess.STDOUT)
-        except OSError:
-            sys.exit(_NO_APACHECTL)
-        except subprocess.CalledProcessError:
-            sys.exit("Syntax check from apachectl failed")
-
-
-def locate_config(apache_ctl):
-    """Uses the apachectl binary to find configuration files
-
-    :param str apache_ctl: Path to `apachectl` binary
-
-
-    :returns: Path to Apache server root and main configuration file
-    :rtype: `tuple` of `str`
-
-    """
-    try:
-        proc = subprocess.Popen([apache_ctl, "-V"],
-                                stdout=subprocess.PIPE, stderr=subprocess.PIPE,
-                                universal_newlines=True)
-        output, _ = proc.communicate()
-    except OSError:
-        sys.exit(_NO_APACHECTL)
-
-    server_root = config_file = ""
-    for line in output.splitlines():
-        # Relevant output lines are of the form: -D DIRECTIVE="VALUE"
-        if "HTTPD_ROOT" in line:
-            server_root = line[line.find('"') + 1:-1]
-        elif "SERVER_CONFIG_FILE" in line:
-            config_file = line[line.find('"') + 1:-1]
-
-    if not (server_root and config_file):
-        sys.exit("Unable to locate Apache configuration. Please run this "
-                 "script again and specify --server-root and --config-file")
-
-    return server_root, config_file
-
-
-def get_args():
-    """Parses command line arguments
-
-    :returns: Parsed command line options
-    :rtype: argparse.Namespace
-
-    """
-    parser = argparse.ArgumentParser(description=_DESCRIPTION)
-    parser.add_argument("-c", "--apache-ctl", default="apachectl",
-                        help="path to the `apachectl` binary")
-    parser.add_argument("-d", "--server-root",
-                        help=("location of the root directory of your Apache "
-                              "configuration"))
-    parser.add_argument("-f", "--config-file",
-                        help=("location of your main Apache configuration "
-                              "file relative to the server root"))
-    args = parser.parse_args()
-
-    # args.server_root XOR args.config_file
-    if bool(args.server_root) != bool(args.config_file):
-        sys.exit("If either --server-root and --config-file are specified, "
-                 "they both must be included")
-    elif args.server_root and args.config_file:
-        args.server_root = os.path.abspath(args.server_root)
-        args.config_file = os.path.abspath(args.config_file)
-
-        if args.config_file.startswith(args.server_root):
-            args.config_file = args.config_file[len(args.server_root) + 1:]
-        else:
-            sys.exit("This script expects the Apache configuration file to be "
-                     "inside the server root")
-
-    return args
-
-
-def main():
-    """Main script execution"""
-    args = get_args()
-    if args.server_root is None:
-        args.server_root, args.config_file = locate_config(args.apache_ctl)
-
-    verify_config(args)
-    tempdir = setup_tempdir(args)
-    atexit.register(lambda: shutil.rmtree(tempdir))
-    make_and_verify_selection(args.server_root, tempdir)
-
-    tarpath = os.path.join(tempdir, "config.tar.gz")
-    with tarfile.open(tarpath, mode="w:gz") as tar:
-        tar.add(tempdir, arcname=".")
-
-    # TODO: Submit tarpath
-
-
-if __name__ == "__main__":
-    main()  # pragma: no cover
diff --git a/letshelp-certbot/letshelp_certbot/apache_test.py b/letshelp-certbot/letshelp_certbot/apache_test.py
deleted file mode 100644
index 0853046b4..000000000
--- a/letshelp-certbot/letshelp_certbot/apache_test.py
+++ /dev/null
@@ -1,241 +0,0 @@
-"""Tests for letshelp.letshelp_certbot_apache.py"""
-import argparse
-import functools
-import os
-import subprocess
-import tarfile
-import tempfile
-import unittest
-
-# six is used in mock.patch()
-import mock
-import pkg_resources
-import six  # pylint: disable=unused-import
-
-import letshelp_certbot.apache as letshelp_le_apache
-
-_PARTIAL_CONF_PATH = os.path.join("mods-available", "ssl.load")
-_PARTIAL_LINK_PATH = os.path.join("mods-enabled", "ssl.load")
-_CONFIG_FILE = pkg_resources.resource_filename(
-    __name__, os.path.join("testdata", _PARTIAL_CONF_PATH))
-_PASSWD_FILE = pkg_resources.resource_filename(
-    __name__, os.path.join("testdata", "uncommonly_named_p4sswd"))
-_KEY_FILE = pkg_resources.resource_filename(
-    __name__, os.path.join("testdata", "uncommonly_named_k3y"))
-_SECRET_FILE = pkg_resources.resource_filename(
-    __name__, os.path.join("testdata", "super_secret_file.txt"))
-
-
-_MODULE_NAME = "letshelp_certbot.apache"
-
-
-_COMPILE_SETTINGS = """Server version: Apache/2.4.10 (Debian)
-Server built:   Mar 15 2015 09:51:43
-Server's Module Magic Number: 20120211:37
-Server loaded:  APR 1.5.1, APR-UTIL 1.5.4
-Compiled using: APR 1.5.1, APR-UTIL 1.5.4
-Architecture:   64-bit
-Server MPM:     event
-  threaded:     yes (fixed thread count)
-    forked:     yes (variable process count)
-Server compiled with....
- -D APR_HAS_SENDFILE
- -D APR_HAS_MMAP
- -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
- -D APR_USE_SYSVSEM_SERIALIZE
- -D APR_USE_PTHREAD_SERIALIZE
- -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
- -D APR_HAS_OTHER_CHILD
- -D AP_HAVE_RELIABLE_PIPED_LOGS
- -D DYNAMIC_MODULE_LIMIT=256
- -D HTTPD_ROOT="/etc/apache2"
- -D SUEXEC_BIN="/usr/lib/apache2/suexec"
- -D DEFAULT_PIDLOG="/var/run/apache2.pid"
- -D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
- -D DEFAULT_ERRORLOG="logs/error_log"
- -D AP_TYPES_CONFIG_FILE="mime.types"
- -D SERVER_CONFIG_FILE="apache2.conf"
-
-"""
-
-
-class LetsHelpApacheTest(unittest.TestCase):
-    @mock.patch(_MODULE_NAME + ".copy_config")
-    def test_make_and_verify_selection(self, mock_copy_config):
-        mock_copy_config.return_value = (["apache2.conf"], ["apache2"])
-
-        with mock.patch("six.moves.input") as mock_input:
-            with mock.patch(_MODULE_NAME + ".sys.stdout"):
-                mock_input.side_effect = ["Yes", "No"]
-                letshelp_le_apache.make_and_verify_selection("root", "temp")
-                self.assertRaises(
-                    SystemExit, letshelp_le_apache.make_and_verify_selection,
-                    "server_root", "temp_dir")
-
-    def test_copy_config(self):
-        tempdir = tempfile.mkdtemp()
-        server_root = pkg_resources.resource_filename(__name__, "testdata")
-        letshelp_le_apache.copy_config(server_root, tempdir)
-
-        temp_testdata = os.path.join(tempdir, "testdata")
-        self.assertFalse(os.path.exists(os.path.join(
-            temp_testdata, os.path.basename(_PASSWD_FILE))))
-        self.assertFalse(os.path.exists(os.path.join(
-            temp_testdata, os.path.basename(_KEY_FILE))))
-        self.assertFalse(os.path.exists(os.path.join(
-            temp_testdata, os.path.basename(_SECRET_FILE))))
-        self.assertTrue(os.path.exists(os.path.join(
-            temp_testdata, _PARTIAL_CONF_PATH)))
-        self.assertTrue(os.path.exists(os.path.join(
-            temp_testdata, _PARTIAL_LINK_PATH)))
-
-    def test_copy_file_without_comments(self):
-        dest = tempfile.mkstemp()[1]
-        letshelp_le_apache.copy_file_without_comments(_PASSWD_FILE, dest)
-
-        with open(_PASSWD_FILE) as original:
-            with open(dest) as copy:
-                for original_line, copied_line in zip(original, copy):
-                    self.assertEqual(original_line, copied_line)
-
-    @mock.patch(_MODULE_NAME + ".subprocess.Popen")
-    def test_safe_config_file(self, mock_popen):
-        mock_popen().communicate.return_value = ("PEM RSA private key", None)
-        self.assertFalse(letshelp_le_apache.safe_config_file("filename"))
-
-        mock_popen().communicate.return_value = ("ASCII text", None)
-        self.assertFalse(letshelp_le_apache.safe_config_file(_PASSWD_FILE))
-        self.assertFalse(letshelp_le_apache.safe_config_file(_KEY_FILE))
-        self.assertFalse(letshelp_le_apache.safe_config_file(_SECRET_FILE))
-        self.assertTrue(letshelp_le_apache.safe_config_file(_CONFIG_FILE))
-
-    @mock.patch(_MODULE_NAME + ".subprocess.Popen")
-    def test_tempdir(self, mock_popen):
-        mock_popen().communicate.side_effect = [
-            ("version", None), ("modules", None), ("vhosts", None)]
-        args = _get_args()
-
-        tempdir = letshelp_le_apache.setup_tempdir(args)
-
-        with open(os.path.join(tempdir, "config_file")) as config_fd:
-            self.assertEqual(config_fd.read(), args.config_file + "\n")
-
-        with open(os.path.join(tempdir, "version")) as version_fd:
-            self.assertEqual(version_fd.read(), "version")
-
-        with open(os.path.join(tempdir, "modules")) as modules_fd:
-            self.assertEqual(modules_fd.read(), "modules")
-
-        with open(os.path.join(tempdir, "vhosts")) as vhosts_fd:
-            self.assertEqual(vhosts_fd.read(), "vhosts")
-
-    @mock.patch(_MODULE_NAME + ".subprocess.check_call")
-    def test_verify_config(self, mock_check_call):
-        args = _get_args()
-        mock_check_call.side_effect = [
-            None, OSError, subprocess.CalledProcessError(1, "apachectl")]
-
-        letshelp_le_apache.verify_config(args)
-        self.assertRaises(SystemExit, letshelp_le_apache.verify_config, args)
-        self.assertRaises(SystemExit, letshelp_le_apache.verify_config, args)
-
-    @mock.patch(_MODULE_NAME + ".subprocess.Popen")
-    def test_locate_config(self, mock_popen):
-        mock_popen().communicate.side_effect = [
-            OSError, ("bad_output", None), (_COMPILE_SETTINGS, None)]
-
-        self.assertRaises(
-            SystemExit, letshelp_le_apache.locate_config, "ctl")
-        self.assertRaises(
-            SystemExit, letshelp_le_apache.locate_config, "ctl")
-        server_root, config_file = letshelp_le_apache.locate_config("ctl")
-        self.assertEqual(server_root, "/etc/apache2")
-        self.assertEqual(config_file, "apache2.conf")
-
-    @mock.patch(_MODULE_NAME + ".argparse")
-    def test_get_args(self, mock_argparse):
-        argv = ["-d", "/etc/apache2"]
-        mock_argparse.ArgumentParser.return_value = _create_mock_parser(argv)
-        self.assertRaises(SystemExit, letshelp_le_apache.get_args)
-
-        server_root = "/etc/apache2"
-        config_file = server_root + "/apache2.conf"
-        argv = ["-d", server_root, "-f", config_file]
-        mock_argparse.ArgumentParser.return_value = _create_mock_parser(argv)
-        args = letshelp_le_apache.get_args()
-        self.assertEqual(args.apache_ctl, "apachectl")
-        self.assertEqual(args.server_root, server_root)
-        self.assertEqual(args.config_file, os.path.basename(config_file))
-
-        server_root = "/etc/apache2"
-        config_file = "/etc/httpd/httpd.conf"
-        argv = ["-d", server_root, "-f", config_file]
-        mock_argparse.ArgumentParser.return_value = _create_mock_parser(argv)
-        self.assertRaises(SystemExit, letshelp_le_apache.get_args)
-
-    def test_main_with_args(self):
-        with mock.patch(_MODULE_NAME + ".get_args"):
-            self._test_main_common()
-
-    def test_main_without_args(self):
-        with mock.patch(_MODULE_NAME + ".get_args") as get_args:
-            args = _get_args()
-            server_root, config_file = args.server_root, args.config_file
-            args.server_root = args.config_file = None
-            get_args.return_value = args
-            with mock.patch(_MODULE_NAME + ".locate_config") as locate:
-                locate.return_value = (server_root, config_file)
-                self._test_main_common()
-
-    def _test_main_common(self):
-        with mock.patch(_MODULE_NAME + ".verify_config"):
-            with mock.patch(_MODULE_NAME + ".setup_tempdir") as mock_setup:
-                tempdir_path = tempfile.mkdtemp()
-                mock_setup.return_value = tempdir_path
-                with mock.patch(_MODULE_NAME + ".make_and_verify_selection"):
-                    testdir_basename = "test"
-                    os.mkdir(os.path.join(tempdir_path, testdir_basename))
-
-                    letshelp_le_apache.main()
-
-                    tar = tarfile.open(os.path.join(
-                        tempdir_path, "config.tar.gz"))
-
-                    tempdir = tar.next()
-                    if tempdir is None:
-                        self.fail("Invalid tarball!")  # pragma: no cover
-                    else:
-                        self.assertTrue(tempdir.isdir())
-                        self.assertEqual(tempdir.name, ".")
-
-                    testdir = tar.next()
-                    if testdir is None:
-                        self.fail("Invalid tarball!")  # pragma: no cover
-                    else:
-                        self.assertTrue(testdir.isdir())
-                        self.assertEqual(os.path.basename(testdir.name),
-                                         testdir_basename)
-
-                    self.assertEqual(tar.next(), None)
-
-
-def _create_mock_parser(argv):
-    parser = argparse.ArgumentParser()
-    mock_parser = mock.MagicMock()
-    mock_parser.add_argument = parser.add_argument
-    mock_parser.parse_args = functools.partial(parser.parse_args, argv)
-
-    return mock_parser
-
-
-def _get_args():
-    args = argparse.Namespace()
-    args.apache_ctl = "apache_ctl"
-    args.config_file = "config_file"
-    args.server_root = "server_root"
-
-    return args
-
-
-if __name__ == "__main__":
-    unittest.main()  # pragma: no cover
diff --git a/letshelp-certbot/letshelp_certbot/magic_typing.py b/letshelp-certbot/letshelp_certbot/magic_typing.py
deleted file mode 100644
index d6b1ff056..000000000
--- a/letshelp-certbot/letshelp_certbot/magic_typing.py
+++ /dev/null
@@ -1,16 +0,0 @@
-"""Shim class to not have to depend on typing module in prod."""
-import sys
-
-
-class TypingClass(object):
-    """Ignore import errors by getting anything"""
-    def __getattr__(self, name):
-        return None
-
-try:
-    # mypy doesn't respect modifying sys.modules
-    from typing import *  # pylint: disable=wildcard-import, unused-wildcard-import
-    from typing import Collection, IO  # type: ignore
-    # pylint: enable=unused-import
-except ImportError:
-    sys.modules[__name__] = TypingClass()
diff --git a/letshelp-certbot/letshelp_certbot/magic_typing_test.py b/letshelp-certbot/letshelp_certbot/magic_typing_test.py
deleted file mode 100644
index 41bc245fa..000000000
--- a/letshelp-certbot/letshelp_certbot/magic_typing_test.py
+++ /dev/null
@@ -1,41 +0,0 @@
-"""Tests for letshelp_certbot.magic_typing."""
-import sys
-import unittest
-
-import mock
-
-
-class MagicTypingTest(unittest.TestCase):
-    """Tests for letshelp_certbot.magic_typing."""
-    def test_import_success(self):
-        try:
-            import typing as temp_typing
-        except ImportError: # pragma: no cover
-            temp_typing = None # pragma: no cover
-        typing_class_mock = mock.MagicMock()
-        text_mock = mock.MagicMock()
-        typing_class_mock.Text = text_mock
-        sys.modules['typing'] = typing_class_mock
-        if 'letshelp_certbot.magic_typing' in sys.modules:
-            del sys.modules['letshelp_certbot.magic_typing'] # pragma: no cover
-        from letshelp_certbot.magic_typing import Text
-        self.assertEqual(Text, text_mock)
-        del sys.modules['letshelp_certbot.magic_typing']
-        sys.modules['typing'] = temp_typing
-
-    def test_import_failure(self):
-        try:
-            import typing as temp_typing
-        except ImportError: # pragma: no cover
-            temp_typing = None # pragma: no cover
-        sys.modules['typing'] = None
-        if 'letshelp_certbot.magic_typing' in sys.modules:
-            del sys.modules['letshelp_certbot.magic_typing'] # pragma: no cover
-        from letshelp_certbot.magic_typing import Text
-        self.assertTrue(Text is None)
-        del sys.modules['letshelp_certbot.magic_typing']
-        sys.modules['typing'] = temp_typing
-
-
-if __name__ == '__main__':
-    unittest.main()  # pragma: no cover
diff --git a/letshelp-certbot/letshelp_certbot/testdata/mods-available/ssl.load b/letshelp-certbot/letshelp_certbot/testdata/mods-available/ssl.load
deleted file mode 100644
index 3d2336ae0..000000000
--- a/letshelp-certbot/letshelp_certbot/testdata/mods-available/ssl.load
+++ /dev/null
@@ -1,2 +0,0 @@
-# Depends: setenvif mime socache_shmcb
-LoadModule ssl_module /usr/lib/apache2/modules/mod_ssl.so
diff --git a/letshelp-certbot/letshelp_certbot/testdata/mods-enabled/ssl.load b/letshelp-certbot/letshelp_certbot/testdata/mods-enabled/ssl.load
deleted file mode 120000
index 9d7972384..000000000
--- a/letshelp-certbot/letshelp_certbot/testdata/mods-enabled/ssl.load
+++ /dev/null
@@ -1 +0,0 @@
-../mods-available/ssl.load
\ No newline at end of file
diff --git a/letshelp-certbot/letshelp_certbot/testdata/super_secret_file.txt b/letshelp-certbot/letshelp_certbot/testdata/super_secret_file.txt
deleted file mode 100644
index 9f592eb7d..000000000
--- a/letshelp-certbot/letshelp_certbot/testdata/super_secret_file.txt
+++ /dev/null
@@ -1 +0,0 @@
-hunter2
diff --git a/letshelp-certbot/letshelp_certbot/testdata/uncommonly_named_k3y b/letshelp-certbot/letshelp_certbot/testdata/uncommonly_named_k3y
deleted file mode 100644
index 659274d1d..000000000
--- a/letshelp-certbot/letshelp_certbot/testdata/uncommonly_named_k3y
+++ /dev/null
@@ -1,6 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIGrAgEAAiEAm2Fylv+Uz7trgTW8EBHP3FQSMeZs2GNQ6VRo1sIVJEkCAwEAAQIh
-AJT0BA/xD01dFCAXzSNyj9nfSZa3NpqzJZZn/eOm7vghAhEAzUVNZn4lLLBD1R6N
-E8TKNQIRAMHHyn3O5JeY36lwKwkUlEUCEAliRauN0L0+QZuYjfJ9aJECEGx4dru3
-rTPCyighdqWNlHUCEQCiLjlwSRtWgmMBudCkVjzt
------END RSA PRIVATE KEY-----
diff --git a/letshelp-certbot/letshelp_certbot/testdata/uncommonly_named_p4sswd b/letshelp-certbot/letshelp_certbot/testdata/uncommonly_named_p4sswd
deleted file mode 100644
index 3559c1d1f..000000000
--- a/letshelp-certbot/letshelp_certbot/testdata/uncommonly_named_p4sswd
+++ /dev/null
@@ -1 +0,0 @@
-johntheripper:$apr1$fIGE9.JL$jTCwNWZy9Ak/yvOLuOyzQ1
diff --git a/letshelp-certbot/readthedocs.org.requirements.txt b/letshelp-certbot/readthedocs.org.requirements.txt
deleted file mode 100644
index b24681caa..000000000
--- a/letshelp-certbot/readthedocs.org.requirements.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-# readthedocs.org gives no way to change the install command to "pip
-# install -e certbot[docs]" (that would in turn install documentation
-# dependencies), but it allows to specify a requirements.txt file at
-# https://readthedocs.org/dashboard/letsencrypt/advanced/ (c.f. #259)
-
-# Although ReadTheDocs certainly doesn't need to install the project
-# in --editable mode (-e), just "pip install .[docs]" does not work as
-# expected and "pip install -e certbot[docs]" must be used instead
-
--e letshelp-certbot[docs]
diff --git a/letshelp-certbot/setup.cfg b/letshelp-certbot/setup.cfg
deleted file mode 100644
index 2a9acf13d..000000000
--- a/letshelp-certbot/setup.cfg
+++ /dev/null
@@ -1,2 +0,0 @@
-[bdist_wheel]
-universal = 1
diff --git a/letshelp-certbot/setup.py b/letshelp-certbot/setup.py
deleted file mode 100644
index 448c145ce..000000000
--- a/letshelp-certbot/setup.py
+++ /dev/null
@@ -1,58 +0,0 @@
-from setuptools import find_packages
-from setuptools import setup
-
-version = '0.7.0.dev0'
-
-install_requires = [
-    'mock',
-    'setuptools',  # pkg_resources
-]
-
-docs_extras = [
-    'Sphinx>=1.0',  # autodoc_member_order = 'bysource', autodoc_default_flags
-    'sphinx_rtd_theme',
-]
-
-setup(
-    name='letshelp-certbot',
-    version=version,
-    description="Let's help Certbot client",
-    url='https://github.com/letsencrypt/letsencrypt',
-    author="Certbot Project",
-    author_email='client-dev@letsencrypt.org',
-    license='Apache License 2.0',
-    python_requires='>=2.7, !=3.0.*, !=3.1.*, !=3.2.*, !=3.3.*, !=3.4.*',
-    classifiers=[
-        'Development Status :: 3 - Alpha',
-        'Intended Audience :: System Administrators',
-        'License :: OSI Approved :: Apache Software License',
-        'Operating System :: POSIX :: Linux',
-        'Programming Language :: Python',
-        'Programming Language :: Python :: 2',
-        'Programming Language :: Python :: 2.7',
-        'Programming Language :: Python :: 3',
-        'Programming Language :: Python :: 3.5',
-        'Programming Language :: Python :: 3.6',
-        'Programming Language :: Python :: 3.7',
-        'Programming Language :: Python :: 3.8',
-        'Topic :: Internet :: WWW/HTTP',
-        'Topic :: Security',
-        'Topic :: System :: Installation/Setup',
-        'Topic :: System :: Networking',
-        'Topic :: System :: Systems Administration',
-        'Topic :: Utilities',
-    ],
-
-    packages=find_packages(),
-    include_package_data=True,
-    install_requires=install_requires,
-    extras_require={
-        'docs': docs_extras,
-    },
-    entry_points={
-        'console_scripts': [
-            'letshelp-certbot-apache = letshelp_certbot.apache:main',
-        ],
-    },
-    test_suite='letshelp_certbot',
-)
diff --git a/linter_plugin.py b/linter_plugin.py
index 1754b1a2a..b6388e2c7 100644
--- a/linter_plugin.py
+++ b/linter_plugin.py
@@ -10,7 +10,7 @@ from pylint.checkers import BaseChecker
 from pylint.interfaces import IAstroidChecker
 
 # Modules in theses packages can import the os module.
-WHITELIST_PACKAGES = ['acme', 'certbot_compatibility_test', 'letshelp_certbot', 'lock_test']
+WHITELIST_PACKAGES = ['acme', 'certbot_compatibility_test', 'lock_test']
 
 
 class ForbidStandardOsModule(BaseChecker):
diff --git a/mypy.ini b/mypy.ini
index 188ed031f..a19fa2a5f 100644
--- a/mypy.ini
+++ b/mypy.ini
@@ -5,6 +5,3 @@ python_version = 2.7
 
 [mypy-acme.magic_typing_test]
 ignore_errors = True
-
-[mypy-letshelp_certbot.magic_typing_test]
-ignore_errors = True
diff --git a/tools/_venv_common.py b/tools/_venv_common.py
index c61385054..75d0d5d33 100644
--- a/tools/_venv_common.py
+++ b/tools/_venv_common.py
@@ -39,7 +39,6 @@ REQUIREMENTS = [
     '-e certbot-dns-route53',
     '-e certbot-dns-sakuracloud',
     '-e certbot-nginx',
-    '-e letshelp-certbot',
     '-e certbot-compatibility-test',
     '-e certbot-ci',
 ]
diff --git a/tools/install_and_test.py b/tools/install_and_test.py
index 192708957..0b47fa5f8 100755
--- a/tools/install_and_test.py
+++ b/tools/install_and_test.py
@@ -12,7 +12,7 @@ import re
 import subprocess
 import sys
 
-SKIP_PROJECTS_ON_WINDOWS = ['certbot-apache', 'letshelp-certbot']
+SKIP_PROJECTS_ON_WINDOWS = ['certbot-apache']
 
 
 def call_with_print(command):
diff --git a/tox.cover.py b/tox.cover.py
index 0ef5c0d07..3e69a14d6 100755
--- a/tox.cover.py
+++ b/tox.cover.py
@@ -9,7 +9,7 @@ DEFAULT_PACKAGES = [
     'certbot_dns_digitalocean', 'certbot_dns_dnsimple', 'certbot_dns_dnsmadeeasy',
     'certbot_dns_gehirn', 'certbot_dns_google', 'certbot_dns_linode', 'certbot_dns_luadns',
     'certbot_dns_nsone', 'certbot_dns_ovh', 'certbot_dns_rfc2136', 'certbot_dns_route53',
-    'certbot_dns_sakuracloud', 'certbot_nginx', 'letshelp_certbot']
+    'certbot_dns_sakuracloud', 'certbot_nginx']
 
 COVER_THRESHOLDS = {
     'certbot': {'linux': 96, 'windows': 96},
@@ -30,10 +30,9 @@ COVER_THRESHOLDS = {
     'certbot_dns_route53': {'linux': 92, 'windows': 92},
     'certbot_dns_sakuracloud': {'linux': 97, 'windows': 97},
     'certbot_nginx': {'linux': 97, 'windows': 97},
-    'letshelp_certbot': {'linux': 100, 'windows': 100}
 }
 
-SKIP_PROJECTS_ON_WINDOWS = ['certbot-apache', 'letshelp-certbot']
+SKIP_PROJECTS_ON_WINDOWS = ['certbot-apache']
 
 
 def cover(package):
diff --git a/tox.ini b/tox.ini
index b2710ce35..3903cdf45 100644
--- a/tox.ini
+++ b/tox.ini
@@ -34,8 +34,7 @@ all_packages =
     certbot[dev] \
     certbot-apache \
     {[base]dns_packages} \
-    certbot-nginx \
-    letshelp-certbot
+    certbot-nginx
 install_packages =
     python {toxinidir}/tools/pip_install_editable.py {[base]all_packages}
 source_paths =
@@ -58,7 +57,6 @@ source_paths =
     certbot-dns-route53/certbot_dns_route53
     certbot-dns-sakuracloud/certbot_dns_sakuracloud
     certbot-nginx/certbot_nginx
-    letshelp-certbot/letshelp_certbot
     tests/lock_test.py
 
 [testenv]