diff options
author | Filip Lajszczak <filip.lajszczak@gmail.com> | 2020-02-06 18:14:17 +0300 |
---|---|---|
committer | Filip Lajszczak <filip.lajszczak@gmail.com> | 2020-02-06 18:14:17 +0300 |
commit | 2b051dd197804b5c93b6e38aae91c991278afdba (patch) | |
tree | e2872c7a8e89f03e0e4675e2d217c595d50a768c /docs/using.rst | |
parent | b27e5804b9671e28f37a6da7e2f1f7fa9455d24a (diff) | |
parent | 7da5196206b33d5593bd15cd1dcce4d790db7e6d (diff) |
Merge branch 'master' of https://github.com/certbot/certbot
Diffstat (limited to 'docs/using.rst')
-rw-r--r-- | docs/using.rst | 996 |
1 files changed, 0 insertions, 996 deletions
diff --git a/docs/using.rst b/docs/using.rst deleted file mode 100644 index e17e56b64..000000000 --- a/docs/using.rst +++ /dev/null @@ -1,996 +0,0 @@ -========== -User Guide -========== - -.. contents:: Table of Contents - :local: - -Certbot Commands -================ - -Certbot uses a number of different commands (also referred -to as "subcommands") to request specific actions such as -obtaining, renewing, or revoking certificates. The most important -and commonly-used commands will be discussed throughout this -document; an exhaustive list also appears near the end of the document. - -The ``certbot`` script on your web server might be named ``letsencrypt`` if your system uses an older package, or ``certbot-auto`` if you used an alternate installation method. Throughout the docs, whenever you see ``certbot``, swap in the correct name as needed. - -.. _plugins: - -Getting certificates (and choosing plugins) -=========================================== - -The Certbot client supports two types of plugins for -obtaining and installing certificates: authenticators and installers. - -Authenticators are plugins used with the ``certonly`` command to obtain a certificate. -The authenticator validates that you -control the domain(s) you are requesting a certificate for, obtains a certificate for the specified -domain(s), and places the certificate in the ``/etc/letsencrypt`` directory on your -machine. The authenticator does not install the certificate (it does not edit any of your server's configuration files to serve the -obtained certificate). If you specify multiple domains to authenticate, they will -all be listed in a single certificate. To obtain multiple separate certificates -you will need to run Certbot multiple times. - -Installers are Plugins used with the ``install`` command to install a certificate. -These plugins can modify your webserver's configuration to -serve your website over HTTPS using certificates obtained by certbot. - -Plugins that do both can be used with the ``certbot run`` command, which is the default -when no command is specified. The ``run`` subcommand can also be used to specify -a combination_ of distinct authenticator and installer plugins. - -=========== ==== ==== =============================================================== ============================= -Plugin Auth Inst Notes Challenge types (and port) -=========== ==== ==== =============================================================== ============================= -apache_ Y Y | Automates obtaining and installing a certificate with Apache. http-01_ (80) -nginx_ Y Y | Automates obtaining and installing a certificate with Nginx. http-01_ (80) -webroot_ Y N | Obtains a certificate by writing to the webroot directory of http-01_ (80) - | an already running webserver. -standalone_ Y N | Uses a "standalone" webserver to obtain a certificate. http-01_ (80) - | Requires port 80 to be available. This is useful on - | systems with no webserver, or when direct integration with - | the local webserver is not supported or not desired. -|dns_plugs| Y N | This category of plugins automates obtaining a certificate by dns-01_ (53) - | modifying DNS records to prove you have control over a - | domain. Doing domain validation in this way is - | the only way to obtain wildcard certificates from Let's - | Encrypt. -manual_ Y N | Helps you obtain a certificate by giving you instructions to http-01_ (80) or - | perform domain validation yourself. Additionally allows you dns-01_ (53) - | to specify scripts to automate the validation task in a - | customized way. -=========== ==== ==== =============================================================== ============================= - -.. |dns_plugs| replace:: :ref:`DNS plugins <dns_plugins>` - -Under the hood, plugins use one of several ACME protocol challenges_ to -prove you control a domain. The options are http-01_ (which uses port 80) -and dns-01_ (requiring configuration of a DNS server on -port 53, though that's often not the same machine as your webserver). A few -plugins support more than one challenge type, in which case you can choose one -with ``--preferred-challenges``. - -There are also many third-party-plugins_ available. Below we describe in more detail -the circumstances in which each plugin can be used, and how to use it. - -.. _challenges: https://tools.ietf.org/html/draft-ietf-acme-acme-03#section-7 -.. _http-01: https://tools.ietf.org/html/draft-ietf-acme-acme-03#section-7.2 -.. _dns-01: https://tools.ietf.org/html/draft-ietf-acme-acme-03#section-7.4 - -Apache ------- - -The Apache plugin currently `supports -<https://github.com/certbot/certbot/blob/master/certbot-apache/certbot_apache/entrypoint.py>`_ -modern OSes based on Debian, Fedora, SUSE, Gentoo and Darwin. -This automates both obtaining *and* installing certificates on an Apache -webserver. To specify this plugin on the command line, simply include -``--apache``. - -Webroot -------- - -If you're running a local webserver for which you have the ability -to modify the content being served, and you'd prefer not to stop the -webserver during the certificate issuance process, you can use the webroot -plugin to obtain a certificate by including ``certonly`` and ``--webroot`` on -the command line. In addition, you'll need to specify ``--webroot-path`` -or ``-w`` with the top-level directory ("web root") containing the files -served by your webserver. For example, ``--webroot-path /var/www/html`` -or ``--webroot-path /usr/share/nginx/html`` are two common webroot paths. - -If you're getting a certificate for many domains at once, the plugin -needs to know where each domain's files are served from, which could -potentially be a separate directory for each domain. When requesting a -certificate for multiple domains, each domain will use the most recently -specified ``--webroot-path``. So, for instance, - -:: - - certbot certonly --webroot -w /var/www/example -d www.example.com -d example.com -w /var/www/other -d other.example.net -d another.other.example.net - -would obtain a single certificate for all of those names, using the -``/var/www/example`` webroot directory for the first two, and -``/var/www/other`` for the second two. - -The webroot plugin works by creating a temporary file for each of your requested -domains in ``${webroot-path}/.well-known/acme-challenge``. Then the Let's Encrypt -validation server makes HTTP requests to validate that the DNS for each -requested domain resolves to the server running certbot. An example request -made to your web server would look like: - -:: - - 66.133.109.36 - - [05/Jan/2016:20:11:24 -0500] "GET /.well-known/acme-challenge/HGr8U1IeTW4kY_Z6UIyaakzOkyQgPr_7ArlLgtZE8SX HTTP/1.1" 200 87 "-" "Mozilla/5.0 (compatible; Let's Encrypt validation server; +https://www.letsencrypt.org)" - -Note that to use the webroot plugin, your server must be configured to serve -files from hidden directories. If ``/.well-known`` is treated specially by -your webserver configuration, you might need to modify the configuration -to ensure that files inside ``/.well-known/acme-challenge`` are served by -the webserver. - -Nginx ------ - -The Nginx plugin should work for most configurations. We recommend backing up -Nginx configurations before using it (though you can also revert changes to -configurations with ``certbot --nginx rollback``). You can use it by providing -the ``--nginx`` flag on the commandline. - -:: - - certbot --nginx - -.. _standalone: - -Standalone ----------- - -Use standalone mode to obtain a certificate if you don't want to use (or don't currently have) -existing server software. The standalone plugin does not rely on any other server -software running on the machine where you obtain the certificate. - -To obtain a certificate using a "standalone" webserver, you can use the -standalone plugin by including ``certonly`` and ``--standalone`` -on the command line. This plugin needs to bind to port 80 in -order to perform domain validation, so you may need to stop your -existing webserver. - -It must still be possible for your machine to accept inbound connections from -the Internet on the specified port using each requested domain name. - -By default, Certbot first attempts to bind to the port for all interfaces using -IPv6 and then bind to that port using IPv4; Certbot continues so long as at -least one bind succeeds. On most Linux systems, IPv4 traffic will be routed to -the bound IPv6 port and the failure during the second bind is expected. - -Use ``--<challenge-type>-address`` to explicitly tell Certbot which interface -(and protocol) to bind. - -.. note:: The ``--standalone-supported-challenges`` option has been - deprecated since ``certbot`` version 0.9.0. - -.. _dns_plugins: - -DNS Plugins ------------ - -If you'd like to obtain a wildcard certificate from Let's Encrypt or run -``certbot`` on a machine other than your target webserver, you can use one of -Certbot's DNS plugins. - -These plugins are not included in a default Certbot installation and must be -installed separately. While the DNS plugins cannot currently be used with -``certbot-auto``, they are available in many OS package managers and as Docker -images. Visit https://certbot.eff.org to learn the best way to use the DNS -plugins on your system. - -Once installed, you can find documentation on how to use each plugin at: - -* `certbot-dns-cloudflare <https://certbot-dns-cloudflare.readthedocs.io>`_ -* `certbot-dns-cloudxns <https://certbot-dns-cloudxns.readthedocs.io>`_ -* `certbot-dns-digitalocean <https://certbot-dns-digitalocean.readthedocs.io>`_ -* `certbot-dns-dnsimple <https://certbot-dns-dnsimple.readthedocs.io>`_ -* `certbot-dns-dnsmadeeasy <https://certbot-dns-dnsmadeeasy.readthedocs.io>`_ -* `certbot-dns-google <https://certbot-dns-google.readthedocs.io>`_ -* `certbot-dns-linode <https://certbot-dns-linode.readthedocs.io>`_ -* `certbot-dns-luadns <https://certbot-dns-luadns.readthedocs.io>`_ -* `certbot-dns-nsone <https://certbot-dns-nsone.readthedocs.io>`_ -* `certbot-dns-ovh <https://certbot-dns-ovh.readthedocs.io>`_ -* `certbot-dns-rfc2136 <https://certbot-dns-rfc2136.readthedocs.io>`_ -* `certbot-dns-route53 <https://certbot-dns-route53.readthedocs.io>`_ - -Manual ------- - -If you'd like to obtain a certificate running ``certbot`` on a machine -other than your target webserver or perform the steps for domain -validation yourself, you can use the manual plugin. While hidden from -the UI, you can use the plugin to obtain a certificate by specifying -``certonly`` and ``--manual`` on the command line. This requires you -to copy and paste commands into another terminal session, which may -be on a different computer. - -The manual plugin can use either the ``http`` or the ``dns`` challenge. You can use the ``--preferred-challenges`` option -to choose the challenge of your preference. - -The ``http`` challenge will ask you to place a file with a specific name and -specific content in the ``/.well-known/acme-challenge/`` directory directly -in the top-level directory (“web root”) containing the files served by your -webserver. In essence it's the same as the webroot_ plugin, but not automated. - -When using the ``dns`` challenge, ``certbot`` will ask you to place a TXT DNS -record with specific contents under the domain name consisting of the hostname -for which you want a certificate issued, prepended by ``_acme-challenge``. - -For example, for the domain ``example.com``, a zone file entry would look like: - -:: - - _acme-challenge.example.com. 300 IN TXT "gfj9Xq...Rg85nM" - - -Additionally you can specify scripts to prepare for validation and -perform the authentication procedure and/or clean up after it by using -the ``--manual-auth-hook`` and ``--manual-cleanup-hook`` flags. This is -described in more depth in the hooks_ section. - -.. _combination: - -Combining plugins ------------------ - -Sometimes you may want to specify a combination of distinct authenticator and -installer plugins. To do so, specify the authenticator plugin with -``--authenticator`` or ``-a`` and the installer plugin with ``--installer`` or -``-i``. - -For instance, you could create a certificate using the webroot_ plugin -for authentication and the apache_ plugin for installation. - -:: - - certbot run -a webroot -i apache -w /var/www/html -d example.com - -Or you could create a certificate using the manual_ plugin for authentication -and the nginx_ plugin for installation. (Note that this certificate cannot -be renewed automatically.) - -:: - - certbot run -a manual -i nginx -d example.com - -.. _third-party-plugins: - -Third-party plugins -------------------- - -There are also a number of third-party plugins for the client, provided by -other developers. Many are beta/experimental, but some are already in -widespread use: - -=========== ==== ==== =============================================================== -Plugin Auth Inst Notes -=========== ==== ==== =============================================================== -plesk_ Y Y Integration with the Plesk web hosting tool -haproxy_ Y Y Integration with the HAProxy load balancer -s3front_ Y Y Integration with Amazon CloudFront distribution of S3 buckets -gandi_ Y Y Integration with Gandi's hosting products and API -varnish_ Y N Obtain certificates via a Varnish server -external_ Y N A plugin for convenient scripting (See also ticket 2782_) -icecast_ N Y Deploy certificates to Icecast 2 streaming media servers -pritunl_ N Y Install certificates in pritunl distributed OpenVPN servers -proxmox_ N Y Install certificates in Proxmox Virtualization servers -postfix_ N Y STARTTLS Everywhere is becoming a Certbot Postfix/Exim plugin -heroku_ Y Y Integration with Heroku SSL -=========== ==== ==== =============================================================== - -.. _plesk: https://github.com/plesk/letsencrypt-plesk -.. _haproxy: https://github.com/greenhost/certbot-haproxy -.. _s3front: https://github.com/dlapiduz/letsencrypt-s3front -.. _gandi: https://github.com/Gandi/letsencrypt-gandi -.. _icecast: https://github.com/e00E/lets-encrypt-icecast -.. _varnish: http://git.sesse.net/?p=letsencrypt-varnish-plugin -.. _2782: https://github.com/certbot/certbot/issues/2782 -.. _pritunl: https://github.com/kharkevich/letsencrypt-pritunl -.. _proxmox: https://github.com/kharkevich/letsencrypt-proxmox -.. _external: https://github.com/marcan/letsencrypt-external -.. _postfix: https://github.com/EFForg/starttls-everywhere -.. _heroku: https://github.com/gboudreau/certbot-heroku - -If you're interested, you can also :ref:`write your own plugin <dev-plugin>`. - -.. _managing-certs: - -Managing certificates -===================== - -To view a list of the certificates Certbot knows about, run -the ``certificates`` subcommand: - -``certbot certificates`` - -This returns information in the following format:: - - Found the following certs: - Certificate Name: example.com - Domains: example.com, www.example.com - Expiry Date: 2017-02-19 19:53:00+00:00 (VALID: 30 days) - Certificate Path: /etc/letsencrypt/live/example.com/fullchain.pem - Private Key Path: /etc/letsencrypt/live/example.com/privkey.pem - -``Certificate Name`` shows the name of the certificate. Pass this name -using the ``--cert-name`` flag to specify a particular certificate for the ``run``, -``certonly``, ``certificates``, ``renew``, and ``delete`` commands. Example:: - - certbot certonly --cert-name example.com - -.. _updating_certs: - -Re-creating and Updating Existing Certificates ----------------------------------------------- - -You can use ``certonly`` or ``run`` subcommands to request -the creation of a single new certificate even if you already have an -existing certificate with some of the same domain names. - -If a certificate is requested with ``run`` or ``certonly`` specifying a -certificate name that already exists, Certbot updates -the existing certificate. Otherwise a new certificate -is created and assigned the specified name. - -The ``--force-renewal``, ``--duplicate``, and ``--expand`` options -control Certbot's behavior when re-creating -a certificate with the same name as an existing certificate. -If you don't specify a requested behavior, Certbot may ask you what you intended. - - -``--force-renewal`` tells Certbot to request a new certificate -with the same domains as an existing certificate. Each domain -must be explicitly specified via ``-d``. If successful, this certificate -is saved alongside the earlier one and symbolic links (the "``live``" -reference) will be updated to point to the new certificate. This is a -valid method of renewing a specific individual -certificate. - -``--duplicate`` tells Certbot to create a separate, unrelated certificate -with the same domains as an existing certificate. This certificate is -saved completely separately from the prior one. Most users will not -need to issue this command in normal circumstances. - -``--expand`` tells Certbot to update an existing certificate with a new -certificate that contains all of the old domains and one or more additional -new domains. With the ``--expand`` option, use the ``-d`` option to specify -all existing domains and one or more new domains. - -Example: - -.. code-block:: none - - certbot --expand -d existing.com,example.com,newdomain.com - -If you prefer, you can specify the domains individually like this: - -.. code-block:: none - - certbot --expand -d existing.com -d example.com -d newdomain.com - -Consider using ``--cert-name`` instead of ``--expand``, as it gives more control -over which certificate is modified and it lets you remove domains as well as adding them. - - -``--allow-subset-of-names`` tells Certbot to continue with certificate generation if -only some of the specified domain authorizations can be obtained. This may -be useful if some domains specified in a certificate no longer point at this -system. - -Whenever you obtain a new certificate in any of these ways, the new -certificate exists alongside any previously obtained certificates, whether -or not the previous certificates have expired. The generation of a new -certificate counts against several rate limits that are intended to prevent -abuse of the ACME protocol, as described -`here <https://community.letsencrypt.org/t/rate-limits-for-lets-encrypt/6769>`__. - -.. _changing: - -Changing a Certificate's Domains -================================ - -The ``--cert-name`` flag can also be used to modify the domains a certificate contains, -by specifying new domains using the ``-d`` or ``--domains`` flag. If certificate ``example.com`` -previously contained ``example.com`` and ``www.example.com``, it can be modified to only -contain ``example.com`` by specifying only ``example.com`` with the ``-d`` or ``--domains`` flag. Example:: - - certbot certonly --cert-name example.com -d example.com - -The same format can be used to expand the set of domains a certificate contains, or to -replace that set entirely:: - - certbot certonly --cert-name example.com -d example.org,www.example.org - - -Revoking certificates ---------------------- - -If your account key has been compromised or you otherwise need to revoke a certificate, -use the ``revoke`` command to do so. Note that the ``revoke`` command takes the certificate path -(ending in ``cert.pem``), not a certificate name or domain. Example:: - - certbot revoke --cert-path /etc/letsencrypt/live/CERTNAME/cert.pem - -You can also specify the reason for revoking your certificate by using the ``reason`` flag. -Reasons include ``unspecified`` which is the default, as well as ``keycompromise``, -``affiliationchanged``, ``superseded``, and ``cessationofoperation``:: - - certbot revoke --cert-path /etc/letsencrypt/live/CERTNAME/cert.pem --reason keycompromise - -Additionally, if a certificate -is a test certificate obtained via the ``--staging`` or ``--test-cert`` flag, that flag must be passed to the -``revoke`` subcommand. -Once a certificate is revoked (or for other certificate management tasks), all of a certificate's -relevant files can be removed from the system with the ``delete`` subcommand:: - - certbot delete --cert-name example.com - -.. note:: If you don't use ``delete`` to remove the certificate completely, it will be renewed automatically at the next renewal event. - -.. note:: Revoking a certificate will have no effect on the rate limit imposed by the Let's Encrypt server. - -.. _renewal: - -Renewing certificates ---------------------- - -.. note:: Let's Encrypt CA issues short-lived certificates (90 - days). Make sure you renew the certificates at least once in 3 - months. - -.. seealso:: Many of the certbot clients obtained through a - distribution come with automatic renewal out of the box, - such as Debian and Ubuntu versions installed through `apt`, - CentOS/RHEL 7 through EPEL, etc. See `Automated Renewals`_ - for more details. - -As of version 0.10.0, Certbot supports a ``renew`` action to check -all installed certificates for impending expiry and attempt to renew -them. The simplest form is simply - -``certbot renew`` - -This command attempts to renew any previously-obtained certificates that -expire in less than 30 days. The same plugin and options that were used -at the time the certificate was originally issued will be used for the -renewal attempt, unless you specify other plugins or options. Unlike ``certonly``, ``renew`` acts on -multiple certificates and always takes into account whether each one is near -expiry. Because of this, ``renew`` is suitable (and designed) for automated use, -to allow your system to automatically renew each certificate when appropriate. -Since ``renew`` only renews certificates that are near expiry it can be -run as frequently as you want - since it will usually take no action. - -The ``renew`` command includes hooks for running commands or scripts before or after a certificate is -renewed. For example, if you have a single certificate obtained using -the standalone_ plugin, you might need to stop the webserver -before renewing so standalone can bind to the necessary ports, and -then restart it after the plugin is finished. Example:: - - certbot renew --pre-hook "service nginx stop" --post-hook "service nginx start" - -If a hook exits with a non-zero exit code, the error will be printed -to ``stderr`` but renewal will be attempted anyway. A failing hook -doesn't directly cause Certbot to exit with a non-zero exit code, but -since Certbot exits with a non-zero exit code when renewals fail, a -failed hook causing renewal failures will indirectly result in a -non-zero exit code. Hooks will only be run if a certificate is due for -renewal, so you can run the above command frequently without -unnecessarily stopping your webserver. - -When Certbot detects that a certificate is due for renewal, ``--pre-hook`` -and ``--post-hook`` hooks run before and after each attempt to renew it. -If you want your hook to run only after a successful renewal, use -``--deploy-hook`` in a command like this. - -``certbot renew --deploy-hook /path/to/deploy-hook-script`` - -For example, if you have a daemon that does not read its certificates as the -root user, a deploy hook like this can copy them to the correct location and -apply appropriate file permissions. - -/path/to/deploy-hook-script - -.. code-block:: none - - #!/bin/sh - - set -e - - for domain in $RENEWED_DOMAINS; do - case $domain in - example.com) - daemon_cert_root=/etc/some-daemon/certs - - # Make sure the certificate and private key files are - # never world readable, even just for an instant while - # we're copying them into daemon_cert_root. - umask 077 - - cp "$RENEWED_LINEAGE/fullchain.pem" "$daemon_cert_root/$domain.cert" - cp "$RENEWED_LINEAGE/privkey.pem" "$daemon_cert_root/$domain.key" - - # Apply the proper file ownership and permissions for - # the daemon to read its certificate and key. - chown some-daemon "$daemon_cert_root/$domain.cert" \ - "$daemon_cert_root/$domain.key" - chmod 400 "$daemon_cert_root/$domain.cert" \ - "$daemon_cert_root/$domain.key" - - service some-daemon restart >/dev/null - ;; - esac - done - -You can also specify hooks by placing files in subdirectories of Certbot's -configuration directory. Assuming your configuration directory is -``/etc/letsencrypt``, any executable files found in -``/etc/letsencrypt/renewal-hooks/pre``, -``/etc/letsencrypt/renewal-hooks/deploy``, and -``/etc/letsencrypt/renewal-hooks/post`` will be run as pre, deploy, and post -hooks respectively when any certificate is renewed with the ``renew`` -subcommand. These hooks are run in alphabetical order and are not run for other -subcommands. (The order the hooks are run is determined by the byte value of -the characters in their filenames and is not dependent on your locale.) - -Hooks specified in the command line, :ref:`configuration file -<config-file>`, or :ref:`renewal configuration files <renewal-config-file>` are -run as usual after running all hooks in these directories. One minor exception -to this is if a hook specified elsewhere is simply the path to an executable -file in the hook directory of the same type (e.g. your pre-hook is the path to -an executable in ``/etc/letsencrypt/renewal-hooks/pre``), the file is not run a -second time. You can stop Certbot from automatically running executables found -in these directories by including ``--no-directory-hooks`` on the command line. - -More information about hooks can be found by running -``certbot --help renew``. - -If you're sure that this command executes successfully without human -intervention, you can add the command to ``crontab`` (since certificates -are only renewed when they're determined to be near expiry, the command -can run on a regular basis, like every week or every day). In that case, -you are likely to want to use the ``-q`` or ``--quiet`` quiet flag to -silence all output except errors. - -If you are manually renewing all of your certificates, the -``--force-renewal`` flag may be helpful; it causes the expiration time of -the certificate(s) to be ignored when considering renewal, and attempts to -renew each and every installed certificate regardless of its age. (This -form is not appropriate to run daily because each certificate will be -renewed every day, which will quickly run into the certificate authority -rate limit.) - -Note that options provided to ``certbot renew`` will apply to -*every* certificate for which renewal is attempted; for example, -``certbot renew --rsa-key-size 4096`` would try to replace every -near-expiry certificate with an equivalent certificate using a 4096-bit -RSA public key. If a certificate is successfully renewed using -specified options, those options will be saved and used for future -renewals of that certificate. - -An alternative form that provides for more fine-grained control over the -renewal process (while renewing specified certificates one at a time), -is ``certbot certonly`` with the complete set of subject domains of -a specific certificate specified via `-d` flags. You may also want to -include the ``-n`` or ``--noninteractive`` flag to prevent blocking on -user input (which is useful when running the command from cron). - -``certbot certonly -n -d example.com -d www.example.com`` - -All of the domains covered by the certificate must be specified in -this case in order to renew and replace the old certificate rather -than obtaining a new one; don't forget any `www.` domains! Specifying -a subset of the domains creates a new, separate certificate containing -only those domains, rather than replacing the original certificate. -When run with a set of domains corresponding to an existing certificate, -the ``certonly`` command attempts to renew that specific certificate. - -Please note that the CA will send notification emails to the address -you provide if you do not renew certificates that are about to expire. - -Certbot is working hard to improve the renewal process, and we -apologize for any inconvenience you encounter in integrating these -commands into your individual environment. - -.. note:: ``certbot renew`` exit status will only be 1 if a renewal attempt failed. - This means ``certbot renew`` exit status will be 0 if no certificate needs to be updated. - If you write a custom script and expect to run a command only after a certificate was actually renewed - you will need to use the ``--deploy-hook`` since the exit status will be 0 both on successful renewal - and when renewal is not necessary. - -.. _renewal-config-file: - - -Modifying the Renewal Configuration File ----------------------------------------- - -When a certificate is issued, by default Certbot creates a renewal configuration file that -tracks the options that were selected when Certbot was run. This allows Certbot -to use those same options again when it comes time for renewal. These renewal -configuration files are located at ``/etc/letsencrypt/renewal/CERTNAME``. - -For advanced certificate management tasks, it is possible to manually modify the certificate's -renewal configuration file, but this is discouraged since it can easily break Certbot's -ability to renew your certificates. If you choose to modify the renewal configuration file -we advise you to test its validity with the ``certbot renew --dry-run`` command. - -.. warning:: Modifying any files in ``/etc/letsencrypt`` can damage them so Certbot can no longer properly manage its certificates, and we do not recommend doing so. - -For most tasks, it is safest to limit yourself to pointing symlinks at the files there, or using -``--deploy-hook`` to copy / make new files based upon those files, if your operational situation requires it -(for instance, combining certificates and keys in different way, or having copies of things with different -specific permissions that are demanded by other programs). - -If the contents of ``/etc/letsencrypt/archive/CERTNAME`` are moved to a new folder, first specify -the new folder's name in the renewal configuration file, then run ``certbot update_symlinks`` to -point the symlinks in ``/etc/letsencrypt/live/CERTNAME`` to the new folder. - -If you would like the live certificate files whose symlink location Certbot updates on each run to -reside in a different location, first move them to that location, then specify the full path of -each of the four files in the renewal configuration file. Since the symlinks are relative links, -you must follow this with an invocation of ``certbot update_symlinks``. - -For example, say that a certificate's renewal configuration file previously contained the following -directives:: - - archive_dir = /etc/letsencrypt/archive/example.com - cert = /etc/letsencrypt/live/example.com/cert.pem - privkey = /etc/letsencrypt/live/example.com/privkey.pem - chain = /etc/letsencrypt/live/example.com/chain.pem - fullchain = /etc/letsencrypt/live/example.com/fullchain.pem - -The following commands could be used to specify where these files are located:: - - mv /etc/letsencrypt/archive/example.com /home/user/me/certbot/example_archive - sed -i 's,/etc/letsencrypt/archive/example.com,/home/user/me/certbot/example_archive,' /etc/letsencrypt/renewal/example.com.conf - mv /etc/letsencrypt/live/example.com/*.pem /home/user/me/certbot/ - sed -i 's,/etc/letsencrypt/live/example.com,/home/user/me/certbot,g' /etc/letsencrypt/renewal/example.com.conf - certbot update_symlinks - -Automated Renewals ------------------- - -Many Linux distributions provide automated renewal when you use the -packages installed through their system package manager. The -following table is an *incomplete* list of distributions which do so, -as well as their methods for doing so. - -If you are not sure whether or not your system has this already -automated, refer to your distribution's documentation, or check your -system's crontab (typically in `/etc/crontab/` and `/etc/cron.*/*` and -systemd timers (`systemctl list-timers`). - -.. csv-table:: Distributions with Automated Renewal - :header: "Distribution Name", "Distribution Version", "Automation Method" - - "CentOS", "EPEL 7", "systemd" - "Debian", "jessie", "cron, systemd" - "Debian", "stretch", "cron, systemd" - "Debian", "testing/sid", "cron, systemd" - "Fedora", "26", "systemd" - "Fedora", "27", "systemd" - "RHEL", "EPEL 7", "systemd" - "Ubuntu", "17.10", "cron, systemd" - "Ubuntu", "certbot PPA", "cron, systemd" - -.. _where-certs: - -Where are my certificates? -========================== - -All generated keys and issued certificates can be found in -``/etc/letsencrypt/live/$domain``. In the case of creating a SAN certificate -with multiple alternative names, ``$domain`` is the first domain passed in -via -d parameter. Rather than copying, please point -your (web) server configuration directly to those files (or create -symlinks). During the renewal_, ``/etc/letsencrypt/live`` is updated -with the latest necessary files. - -.. note:: ``/etc/letsencrypt/archive`` and ``/etc/letsencrypt/keys`` - contain all previous keys and certificates, while - ``/etc/letsencrypt/live`` symlinks to the latest versions. - -The following files are available: - -``privkey.pem`` - Private key for the certificate. - - .. warning:: This **must be kept secret at all times**! Never share - it with anyone, including Certbot developers. You cannot - put it into a safe, however - your server still needs to access - this file in order for SSL/TLS to work. - - .. note:: As of Certbot version 0.29.0, private keys for new certificate - default to ``0600``. Any changes to the group mode or group owner (gid) - of this file will be preserved on renewals. - - This is what Apache needs for `SSLCertificateKeyFile - <https://httpd.apache.org/docs/2.4/mod/mod_ssl.html#sslcertificatekeyfile>`_, - and Nginx for `ssl_certificate_key - <http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_certificate_key>`_. - -``fullchain.pem`` - All certificates, **including** server certificate (aka leaf certificate or - end-entity certificate). The server certificate is the first one in this file, - followed by any intermediates. - - This is what Apache >= 2.4.8 needs for `SSLCertificateFile - <https://httpd.apache.org/docs/2.4/mod/mod_ssl.html#sslcertificatefile>`_, - and what Nginx needs for `ssl_certificate - <http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_certificate>`_. - -``cert.pem`` and ``chain.pem`` (less common) - ``cert.pem`` contains the server certificate by itself, and - ``chain.pem`` contains the additional intermediate certificate or - certificates that web browsers will need in order to validate the - server certificate. If you provide one of these files to your web - server, you **must** provide both of them, or some browsers will show - "This Connection is Untrusted" errors for your site, `some of the time - <https://whatsmychaincert.com/>`_. - - Apache < 2.4.8 needs these for `SSLCertificateFile - <https://httpd.apache.org/docs/2.4/mod/mod_ssl.html#sslcertificatefile>`_. - and `SSLCertificateChainFile - <https://httpd.apache.org/docs/2.4/mod/mod_ssl.html#sslcertificatechainfile>`_, - respectively. - - If you're using OCSP stapling with Nginx >= 1.3.7, ``chain.pem`` should be - provided as the `ssl_trusted_certificate - <http://nginx.org/en/docs/http/ngx_http_ssl_module.html#ssl_trusted_certificate>`_ - to validate OCSP responses. - -.. note:: All files are PEM-encoded. - If you need other format, such as DER or PFX, then you - could convert using ``openssl``. You can automate that with - ``--deploy-hook`` if you're using automatic renewal_. - -.. _hooks: - -Pre and Post Validation Hooks -============================= - -Certbot allows for the specification of pre and post validation hooks when run -in manual mode. The flags to specify these scripts are ``--manual-auth-hook`` -and ``--manual-cleanup-hook`` respectively and can be used as follows: - -:: - - certbot certonly --manual --manual-auth-hook /path/to/http/authenticator.sh --manual-cleanup-hook /path/to/http/cleanup.sh -d secure.example.com - -This will run the ``authenticator.sh`` script, attempt the validation, and then run -the ``cleanup.sh`` script. Additionally certbot will pass relevant environment -variables to these scripts: - -- ``CERTBOT_DOMAIN``: The domain being authenticated -- ``CERTBOT_VALIDATION``: The validation string (HTTP-01 and DNS-01 only) -- ``CERTBOT_TOKEN``: Resource name part of the HTTP-01 challenge (HTTP-01 only) - -Additionally for cleanup: - -- ``CERTBOT_AUTH_OUTPUT``: Whatever the auth script wrote to stdout - -Example usage for HTTP-01: - -:: - - certbot certonly --manual --preferred-challenges=http --manual-auth-hook /path/to/http/authenticator.sh --manual-cleanup-hook /path/to/http/cleanup.sh -d secure.example.com - -/path/to/http/authenticator.sh - -.. code-block:: none - - #!/bin/bash - echo $CERTBOT_VALIDATION > /var/www/htdocs/.well-known/acme-challenge/$CERTBOT_TOKEN - -/path/to/http/cleanup.sh - -.. code-block:: none - - #!/bin/bash - rm -f /var/www/htdocs/.well-known/acme-challenge/$CERTBOT_TOKEN - -Example usage for DNS-01 (Cloudflare API v4) (for example purposes only, do not use as-is) - -:: - - certbot certonly --manual --preferred-challenges=dns --manual-auth-hook /path/to/dns/authenticator.sh --manual-cleanup-hook /path/to/dns/cleanup.sh -d secure.example.com - -/path/to/dns/authenticator.sh - -.. code-block:: none - - #!/bin/bash - - # Get your API key from https://www.cloudflare.com/a/account/my-account - API_KEY="your-api-key" - EMAIL="your.email@example.com" - - # Strip only the top domain to get the zone id - DOMAIN=$(expr match "$CERTBOT_DOMAIN" '.*\.\(.*\..*\)') - - # Get the Cloudflare zone id - ZONE_EXTRA_PARAMS="status=active&page=1&per_page=20&order=status&direction=desc&match=all" - ZONE_ID=$(curl -s -X GET "https://api.cloudflare.com/client/v4/zones?name=$DOMAIN&$ZONE_EXTRA_PARAMS" \ - -H "X-Auth-Email: $EMAIL" \ - -H "X-Auth-Key: $API_KEY" \ - -H "Content-Type: application/json" | python -c "import sys,json;print(json.load(sys.stdin)['result'][0]['id'])") - - # Create TXT record - CREATE_DOMAIN="_acme-challenge.$CERTBOT_DOMAIN" - RECORD_ID=$(curl -s -X POST "https://api.cloudflare.com/client/v4/zones/$ZONE_ID/dns_records" \ - -H "X-Auth-Email: $EMAIL" \ - -H "X-Auth-Key: $API_KEY" \ - -H "Content-Type: application/json" \ - --data '{"type":"TXT","name":"'"$CREATE_DOMAIN"'","content":"'"$CERTBOT_VALIDATION"'","ttl":120}' \ - | python -c "import sys,json;print(json.load(sys.stdin)['result']['id'])") - # Save info for cleanup - if [ ! -d /tmp/CERTBOT_$CERTBOT_DOMAIN ];then - mkdir -m 0700 /tmp/CERTBOT_$CERTBOT_DOMAIN - fi - echo $ZONE_ID > /tmp/CERTBOT_$CERTBOT_DOMAIN/ZONE_ID - echo $RECORD_ID > /tmp/CERTBOT_$CERTBOT_DOMAIN/RECORD_ID - - # Sleep to make sure the change has time to propagate over to DNS - sleep 25 - -/path/to/dns/cleanup.sh - -.. code-block:: none - - #!/bin/bash - - # Get your API key from https://www.cloudflare.com/a/account/my-account - API_KEY="your-api-key" - EMAIL="your.email@example.com" - - if [ -f /tmp/CERTBOT_$CERTBOT_DOMAIN/ZONE_ID ]; then - ZONE_ID=$(cat /tmp/CERTBOT_$CERTBOT_DOMAIN/ZONE_ID) - rm -f /tmp/CERTBOT_$CERTBOT_DOMAIN/ZONE_ID - fi - - if [ -f /tmp/CERTBOT_$CERTBOT_DOMAIN/RECORD_ID ]; then - RECORD_ID=$(cat /tmp/CERTBOT_$CERTBOT_DOMAIN/RECORD_ID) - rm -f /tmp/CERTBOT_$CERTBOT_DOMAIN/RECORD_ID - fi - - # Remove the challenge TXT record from the zone - if [ -n "${ZONE_ID}" ]; then - if [ -n "${RECORD_ID}" ]; then - curl -s -X DELETE "https://api.cloudflare.com/client/v4/zones/$ZONE_ID/dns_records/$RECORD_ID" \ - -H "X-Auth-Email: $EMAIL" \ - -H "X-Auth-Key: $API_KEY" \ - -H "Content-Type: application/json" - fi - fi - -.. _lock-files: - -Changing the ACME Server -======================== - -By default, Certbot uses Let's Encrypt's initial production server at -https://acme-v01.api.letsencrypt.org/. You can tell Certbot to use a -different CA by providing ``--server`` on the command line or in a -:ref:`configuration file <config-file>` with the URL of the server's -ACME directory. For example, if you would like to use Let's Encrypt's -new ACMEv2 server, you would add ``--server -https://acme-v02.api.letsencrypt.org/directory`` to the command line. -Certbot will automatically select which version of the ACME protocol to -use based on the contents served at the provided URL. - -If you use ``--server`` to specify an ACME CA that implements a newer -version of the spec, you may be able to obtain a certificate for a -wildcard domain. Some CAs (such as Let's Encrypt) require that domain -validation for wildcard domains must be done through modifications to -DNS records which means that the dns-01_ challenge type must be used. To -see a list of Certbot plugins that support this challenge type and how -to use them, see plugins_. - -Lock Files -========== - -When processing a validation Certbot writes a number of lock files on your system -to prevent multiple instances from overwriting each other's changes. This means -that by default two instances of Certbot will not be able to run in parallel. - -Since the directories used by Certbot are configurable, Certbot -will write a lock file for all of the directories it uses. This include Certbot's -``--work-dir``, ``--logs-dir``, and ``--config-dir``. By default these are -``/var/lib/letsencrypt``, ``/var/log/letsencrypt``, and ``/etc/letsencrypt`` -respectively. Additionally if you are using Certbot with Apache or nginx it will -lock the configuration folder for that program, which are typically also in the -``/etc`` directory. - -Note that these lock files will only prevent other instances of Certbot from -using those directories, not other processes. If you'd like to run multiple -instances of Certbot simultaneously you should specify different directories -as the ``--work-dir``, ``--logs-dir``, and ``--config-dir`` for each instance -of Certbot that you would like to run. - -.. _config-file: - -Configuration file -================== - -Certbot accepts a global configuration file that applies its options to all invocations -of Certbot. Certificate specific configuration choices should be set in the ``.conf`` -files that can be found in ``/etc/letsencrypt/renewal``. - -By default no cli.ini file is created, after creating one -it is possible to specify the location of this configuration file with -``certbot-auto --config cli.ini`` (or shorter ``-c cli.ini``). An -example configuration file is shown below: - -.. include:: ../examples/cli.ini - :code: ini - -By default, the following locations are searched: - -- ``/etc/letsencrypt/cli.ini`` -- ``$XDG_CONFIG_HOME/letsencrypt/cli.ini`` (or - ``~/.config/letsencrypt/cli.ini`` if ``$XDG_CONFIG_HOME`` is not - set). - -Since this configuration file applies to all invocations of certbot it is incorrect -to list domains in it. Listing domains in cli.ini may prevent renewal from working. -Additionally due to how arguments in cli.ini are parsed, options which wish to -not be set should not be listed. Options set to false will instead be read -as being set to true by older versions of Certbot, since they have been listed -in the config file. - -.. keep it up to date with constants.py - -.. _log-rotation: - -Log Rotation -============ - -By default certbot stores status logs in ``/var/log/letsencrypt``. By default -certbot will begin rotating logs once there are 1000 logs in the log directory. -Meaning that once 1000 files are in ``/var/log/letsencrypt`` Certbot will delete -the oldest one to make room for new logs. The number of subsequent logs can be -changed by passing the desired number to the command line flag -``--max-log-backups``. - -.. note:: Some distributions, including Debian and Ubuntu, disable - certbot's internal log rotation in favor of a more traditional - logrotate script. If you are using a distribution's packages and - want to alter the log rotation, check `/etc/logrotate.d/` for a - certbot rotation script. - -.. _command-line: - -Certbot command-line options -============================ - -Certbot supports a lot of command line options. Here's the full list, from -``certbot --help all``: - -.. literalinclude:: cli-help.txt - -Getting help -============ - -If you're having problems, we recommend posting on the Let's Encrypt -`Community Forum <https://community.letsencrypt.org>`_. - -If you find a bug in the software, please do report it in our `issue -tracker <https://github.com/certbot/certbot/issues>`_. Remember to -give us as much information as possible: - -- copy and paste exact command line used and the output (though mind - that the latter might include some personally identifiable - information, including your email and domains) -- copy and paste logs from ``/var/log/letsencrypt`` (though mind they - also might contain personally identifiable information) -- copy and paste ``certbot --version`` output -- your operating system, including specific version -- specify which installation method you've chosen |