Age | Commit message (Collapse) | Author |
|
This is preparation for #6041.
For historic reasons, the code for bulding the section tree and the taxonomies were very much separate.
This works, but makes it hard to extend, maintain, and possibly not so fast as it could be.
This simplification also introduces 3 slightly breaking changes, which I suspect most people will be pleased about. See referenced issues:
This commit also switches the radix tree dependency to a mutable implementation: github.com/armon/go-radix.
Fixes #6154
Fixes #6153
Fixes #6152
|
|
fixes superfluous whitespace around code blocks due to misuse of pre tag
|
|
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
|
|
|
|
To get it to build on Go 1.13.
|
|
Fixes #6088
|
|
- added support for anonymous footnotes
- changed source block html output to more closely resemble emacs org-export
output
|
|
See #6040
|
|
Sadly, goorgeous has not been updated in over a year and still has a lot of
open issues (e.g. no support for nested lists).
go-org fixes most of those issues and supports a larger subset of Org mode
syntax.
|
|
|
|
This will hopefully improve the dependency/install problems we have seen lately.
See #5954
|
|
|
|
|
|
|
|
|
|
|
|
Closes #5812
|
|
Closes #5780
|
|
Closes #5673
|
|
The main motivation of this commit is to add a `page.Page` interface to replace the very file-oriented `hugolib.Page` struct.
This is all a preparation step for issue #5074, "pages from other data sources".
But this also fixes a set of annoying limitations, especially related to custom output formats, and shortcodes.
Most notable changes:
* The inner content of shortcodes using the `{{%` as the outer-most delimiter will now be sent to the content renderer, e.g. Blackfriday.
This means that any markdown will partake in the global ToC and footnote context etc.
* The Custom Output formats are now "fully virtualized". This removes many of the current limitations.
* The taxonomy list type now has a reference to the `Page` object.
This improves the taxonomy template `.Title` situation and make common template constructs much simpler.
See #5074
Fixes #5763
Fixes #5758
Fixes #5090
Fixes #5204
Fixes #4695
Fixes #5607
Fixes #5707
Fixes #5719
Fixes #3113
Fixes #5706
Fixes #5767
Fixes #5723
Fixes #5769
Fixes #5770
Fixes #5771
Fixes #5759
Fixes #5776
Fixes #5777
Fixes #5778
|
|
|
|
|
|
|
|
Fixes #5650
|
|
Fixes #4993
|
|
Fixes #5497
|
|
This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are:
* A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`.
* A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable.
If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates.
Given the example tree below:
If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`).
```bash
config
├── _default
│ ├── config.toml
│ ├── languages.toml
│ ├── menus
│ │ ├── menus.en.toml
│ │ └── menus.zh.toml
│ └── params.toml
├── development
│ └── params.toml
└── production
├── config.toml
└── params.toml
```
Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`.
Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization.
We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed.
Fixes #5422
|
|
|
|
Fixes #5432
See #5435
|
|
This commits reworks how file caching is performed in Hugo. Now there is only one way, and it can be configured.
This is the default configuration:
```toml
[caches]
[caches.getjson]
dir = ":cacheDir"
maxAge = -1
[caches.getcsv]
dir = ":cacheDir"
maxAge = -1
[caches.images]
dir = ":resourceDir/_gen"
maxAge = -1
[caches.assets]
dir = ":resourceDir/_gen"
maxAge = -1
```
You can override any of these cache setting in your own `config.toml`.
The placeholders explained:
`:cacheDir`: This is the value of the `cacheDir` config option if set (can also be set via OS env variable `HUGO_CACHEDIR`). It will fall back to `/opt/build/cache/hugo_cache/` on Netlify, or a `hugo_cache` directory below the OS temp dir for the others.
`:resourceDir`: This is the value of the `resourceDir` config option.
`maxAge` is the time in seconds before a cache entry will be evicted, -1 means forever and 0 effectively turns that particular cache off.
This means that if you run your builds on Netlify, all caches configured with `:cacheDir` will be saved and restored on the next build. For other CI vendors, please read their documentation. For an CircleCI example, see https://github.com/bep/hugo-sass-test/blob/6c3960a8f4b90e8938228688bc49bdcdd6b2d99e/.circleci/config.yml
Fixes #5404
|
|
No functional changes, just support for Go Modules.
|
|
Fixes #5392
|
|
See #5371
|
|
Closes #5261
|
|
See #4414
|
|
This reverts commit 83c873ff37ddd379181540021232f026e7678486.
|
|
Closes #5261
|
|
Closes #5340
|
|
Fixes #5344
|
|
Fixes #5325
|
|
See #5324
|
|
Now that we have a proper page parse tree, this can be greatly simplified.
See #5324
|
|
See #5324
|
|
The main item in this commit is showing of errors with a file context when running `hugo server`.
This can be turned off: `hugo server --disableBrowserError` (can also be set in `config.toml`).
But to get there, the error handling in Hugo needed a revision. There are some items left TODO for commits soon to follow, most notable errors in content and config files.
Fixes #5284
Fixes #5290
See #5325
See #5324
|
|
|
|
|
|
|
|
And run the Appveyor tests without GOPATH.
Fixes https://github.com/magefile/mage/issues/79
|
|
See #5115
|
|
See #5115
|