Expansion of file system happens automatically

No need to run it manually. Has been this case for a while now actually.

Thanks for the heads-up @John-Mc

1 files changed, 1 insertions, 1 deletions

diff --git a/README.rst b/README.rst
index 3bb2581..a6986fc 100644
--- a/README.rst
+++ b/README.rst
@@ -27,7 +27,7 @@ How to use it?
 #. Unzip the image and install it to an sd card `like any other Raspberry Pi image <https://www.raspberrypi.org/documentation/installation/installing-images/README.md>`_
 #. Configure your WiFi by editing ``octopi-wpa-supplicant.txt`` on the root of the flashed card when using it like a thumb drive
 #. Boot the Pi from the card
-#. Log into your Pi via SSH (it is located at ``octopi.local`` `if your computer supports bonjour <https://learn.adafruit.com/bonjour-zeroconf-networking-for-windows-and-linux/overview>`_ or the IP address assigned by your router), default username is "pi", default password is "raspberry", change the password using the ``passwd`` command and expand the filesystem of the SD card through the corresponding option when running ``sudo raspi-config``.
+#. Log into your Pi via SSH (it is located at ``octopi.local`` `if your computer supports bonjour <https://learn.adafruit.com/bonjour-zeroconf-networking-for-windows-and-linux/overview>`_ or the IP address assigned by your router), default username is "pi", default password is "raspberry" and change the password using the ``passwd`` command.
 
 OctoPrint is located at `http://octopi.local <http://octopi.local>`_ and also at `https://octopi.local <https://octopi.local>`_. Since the SSL certificate is self signed (and generated upon first boot), you will get a certificate warning at the latter location, please ignore it.