2015.12.15 - 1.2.1 - cleanflight

• Add links to STM VCP Drivers and Zadig.
• Update recovery procedure on Firmware Flasher page.

2015.12.15 - 1.2.0 - cleanflight

• Support Cleanflight API 1.15.0.
• Add new failsafe configuration.
• Support IBUS Serial RX.

2015.11.28 - 1.1.0 - cleanflight

• Support Cleanflight API 1.14.0.
• GUI cleanups and fixes.

2015.11.11 - 1.0.0 - cleanflight

• Major GUI rework.
• Support flashing of boards that have USB directly connected to MCU. (Device Firmware Update/DFU support).

2015.10.31 - 0.66.0 - cleanflight

• Update servo configuration (requires firmware >= 1.10.0).
• Add some notes and help messages for common issues.
• Update sponsors panel and add links to new boards.
• Upgrade some JS libraries to latest versions (Three, JQuery/UI, D3)
• Allow stick input from UI (when using RX_MSP)
• Align servo numbering with firmware and documentation

2015.05.23 - 0.65.0 - cleanflight

• Support flashing of the SPRacingF3.
• Support manual baud rate configuration for flashing.

2015.05.20 - 0.64.0 - cleanflight

• Support In-flight adjustment of Pitch P/I/D and Roll P/I/D and Pitch/Roll rates.
• Manual serial port selection.
• Update sponsors panel.
• Update list of supported boards and add links to them.
• Minor firmware release listing improvements.

2015.05.09 - 0.63.2 - cleanflight

• Support cleanflight API version > 1.9.

2015.04.14 - 0.63.1 - cleanflight

• Fix for looptime backup/restore when migrating from firmware with api < 1.8.
• Update sponsors panel.
• Add link for T-Shirts!

2015.03.29 - 0.63.0 - cleanflight

• Configuration tab supports auto_disarm_delay and disarm_kill_switch (requires firmware >= 1.8.0).
• PID Tuning tab allows TPA Breakpoint changes (requires firmware >= 1.8.0).
• Correct Artificial Horizon Pitch/Roll views.
• Change logging time stamp to include date stamp.
• Support new firmware 1.8 serial port configuration.
• Move documentation and help to new tab.
• Add contributing section to welcome tab.

2015.02.27 - 0.62.1 - cleanflight

• Minor bug fixes.

2015.02.26 - 0.62.0 - cleanflight

• Add flight indicators to setup screen tab.
• Add dataflash tab (requires firmware >= 1.8.0)..
• Add Cleanflight logos.
• Fix loading online flash files - github moved them to amazon aws.
• Fix to fallback 3D model.
• Add support for SPRacingF3.

2015.02.03 - 0.61.0 - cleanflight

• Support changing PID controller - three new PID controllers in 1.7.0 firmware.
• Support for LED thrust ring.
• Support for LED colors.
• Support for displaying sonar sensor reading on the sensors tab.
• UI cleanup - 'Welcome' and 'Firmware flasher' are now tabs.
• New Logo. (Tom McCullough)
• New 3D models (AkFreak).
• Update presentation of LEDs that have multiple functions.
• Add Documentation and Support panels to welcome tab.
• Add support for backup and restore of LED strip configuration.
• Fix for disappearing tabs in chrome 41 beta.
• Various other minor improvements.

2015.01.08 - 0.60.0 - cleanflight

• Add LED strip tab for LED configuration (requires firmware >= 1.6.0)..
• Replace motor order images (stronnag)

2015.01.08 - 0.59.1 - cleanflight

• Add support for Blackbox flight recorder feature (requires firmware >= 1.5.0).
• Update RSSI channel section to allow any channel.
• Implement configuration migration to aid with backwards compatibility.
• Allow CLI access when connecting firmware with an out-of-date API.
• Support 'release candidate' and 'stable' releases.

2015.01.04 - 0.59.0 - cleanflight

• Overhaul configuration tab.
• Allow configuration of GPS baud rate.

2015.01.03 - 0.58.0 - cleanflight

• Add new 'Ports' tab to allow configuration of serial ports.

2014.12.06 - 0.57.2 - cleanflight

• Force user to select firmware before flashing (pulsar).

2014.12.06 - 0.57.1 - cleanflight

• Latest firmware required.
• Merge latest baseflight configurator changes.
• Added support for choosing and downloading firmware via the github relases API.
• Added Armattan Quads as a sponsor.
• Various UI tweaks.

2014.12.06 - 0.57

• Firmware flasher now contains firmware builds picker
• Implement new and experimental review mechanism
• Support for new A-tail Quad craft type
• Firmware flasher flashing speed optimizations
• Add specific 3D models for atail/vtail quad (norem)
• Major bugfix for stuck UI after delayed port open procedure
• Bugfix for GPS distance to home not displaying
• Bugfix for backup/restore misbehaving (mostly on OSX)

2014.11.04 - 0.56

• Add hex plus, hex X, tri, y4, y6 3D models (jef79m)
• Bugfix for battery voltage saving sequence
• Bugfix for fetching development firmware

2014.10.31 - 0.55

• Minimum required Chrome version set to 38+
• Minimum accepted firmware version set to 2.31
• Support for flashing development firmware
• Setup tab performance improvements, faster 3D model
• Strongly improve amount of data stored in backups
• Improve flash on connect in firmware flasher
• Rearrange texts and options in firmware flasher
• Bugfix for corrupted minimum window size on Windows 7
• Bugfix for incorrect date & time in firmware flasher
• Bugfix for port handler firing before port being initialized

2014.10.06 - 0.54

• Backup files now also contain servo settings
• Pre 0.54 backup files are incompatible, save new ones
• Bugfixes

2014.09.30 - 0.53

• Enhanced 3D model (creyc)
• Fallback 3D model for canvas renderer (creyc)
• More predefined options for channel map
• Display motor/servo signal value inside the bars
• Bugfixes

2014.09.29. - 0.52

• We recommend upgrading to the latest firmware
• Simplified Initial Setup tab and renamed it to Setup
• Renamed Auxiliary Configuration to Mode selection
• Implemented new Configuration tab (check it out)
• Simplified meter UI in Receiver tab
• Channel Map is now configurable in Receiver tab
• Using new "real" 3D renderer for the 3D model
• 3D model for Quad X (creyc)
• Additional motor order diagrams (creyc)
• Updated MSP layer with new custom Baseflight commands
• Various optimizations and bugfixes

9.11.2014 - 0.51.3 cleanflight

• Add 'Adjustments' tab for configuring in-flight adjustment switches.

13.10.2014 - 0.51.2 cleanflight

• Requires latest firmware.
• Change default channel mode range to 1300/1700 to match MultiWii MID AUX checkbox.
• Use new experimental MSP_API_VERSION command.

13.10.2014 - 0.51.1 cleanflight

• Requires latest firmware.
• Update donation link.
• Update MSP IDs for Cleanflight specific MSP commands.

13.10.2014 - 0.51.0 cleanflight

• Requires latest firmware.
• Support mode ranges on auxillary tab.

2014.09.09 - 0.51

• Configurator userbase is over 9000 now :-)
• Small global UI revamp to utilize space little bit better
• Online Firmware can be saved locally
• Added missing model information for custom model

09.04.2014 - 0.50.3 cleanflight

• Update URLs.

09.04.2014 - 0.50.2 cleanflight

• Update default data filenames.

09.04.2014 - 0.50.1 cleanflight

• Ensure initialised data is not used when configuring aux channels.
• Update sponsors for cleanflight specific sponsors.

2014.08.31 - 0.50

• Small UI revamp for Firmware Flasher
• Added "Flash slowly" mode (bluetooth friendly)
• Bugfixes

08.25.2014 - 0.49.1 cleanflight

• Fix auxiliary configuration tab when using an rc system with 3 aux channels.

08.18.2014 - 0.49

• Motor indicators now display signal length in tooltips
• Additional motor order diagrams (creyc)
• Bugfixes

2014.07.27 - 0.48

• Configurator reached 6000+ users on 2014.07.26
• Added motor order diagrams (creyc, Curtisbeef)
• Flashing timeout bugfixes

07.31.2014 - cleanflight

• Fix auxiliary configuration tab when using parallel pwm.

2014.07.17 - 0.47

• Bugfixes related to Chrome 36+ release
• Various optimizations and behavior improvements

2014.07.11 - 0.46

• Application will display a spinner while waiting for data
• Bugfixes

07.06.2014 - cleanflight

• Servos tab updated to support Cleanflight's cleaner implementation of channel forwarding

2014.07.04 - 0.45

• Configurator reached 5000+ users on 2014.07.03
• Updated various text notes to make things clearer
• UI polish
• Various bugfixes

2014.06.27 - 0.44

• Added more scale factors in the motor testing tab
• If application closes without disconnecting motors should spin down
• Bugfixes for CLI, Motor Testing & Logging tabs

2014.06.26 - 0.43

• Experimental passthrough support for logging
• MSP_ANALOG support for logging
• Allow running motors (testing) while monitoring sensors
• Major UI changes in Motor Testing tab
• Tiny cosmetic changes
• Initial set of UI bugfixes for Chrome 36+

2014.06.16 - 0.42

• Added I2C Error indicator to status bar
• Optimizations & bugfixes

2014.06.01 - 0.41

• Configurator reached 4000+ users on 05.29.2014
• Support for new current sensing code (latest firmware)

2014.05.27 - 0.40

• Added Logging tab (log various MSP data into CSV file)
• Bugfix for CLI input area

2014.05.08 - 0.39

• UI enhancements for sensors tab

2014.05.08 - 0.38

• Bugfix for firmware flasher UI
• Updating libraries

2014.05.08 - 0.37

• Window can be resized and maximized
• Graphs will now properly scale to fill content area
• Small GPS UI rework
• Small UI polish on all tabs
• Bugfixes

2014.05.03 - 0.36

• Another bugfix for high dpi displays
• PID names will now match PID names in firmware

2014.05.03 - 0.35

• Configurator reached 3000+ users on 2014.05.03
• Polished Welcome screen
• Tiny UI bugfix for gps tab

2014.04.29 - 0.34

• Bugfix for wrong graph positions on high dpi displays

2014.04.26 - 0.33

• Bugfix for loading online firmware

2014.04.22 - 0.32

• Native application frame on Chrome 35+
• Dedicated application options
• Reworked Sensors tab (optimized graphs, new ui)
• Small ui changes
• Performance improvements

2014.04.11 - 0.31

• Bugfix for Sliders not properly updating
• Bugfix for CLI line feed on ChromeOS

2014.04.03 - 0.30

• Configurator reached 2000+ users on 2014.03.24
• Initial work on translation support
• Small UI rework in initial tab
• UI rework in receiver tab, new plot
• Bugfixes related to servo tab, ui polish
• Added info box in initial tab display voltage & RSSI
• Stability improvements, performance improvements, bugfixes

2014.03.09 - 0.29

• Motor Tab UI bugfixes
• Added support for variable plot refresh rate in Receiver Tab
• Bugfixes

2014.03.01 - 0.28

• Online Firmware now displays Github commit info
• Stability improvements & bugfixes

2014.02.27 - 0.27

• Sensor Tab UI bugfixes
• Firmware Flasher functionality improvements
• Added new "developer" functionality "flash on connect"
• Major Version checking added

2014.02.23 - 0.26

• Motor tab UI / functionality changes
• Backup settings IO bugfixes
• Receiver / Aux config tab command collision bugfix

2014.02.20 - 0.25

• Running on new serial API (Chrome 33+)
• Added Velocity in PID tab
• Added Profile select in PID tab
• Different scaling for raw sensor data
• Motor Test now support defining min/max values
• Added Master slider in Motor Test UI
• There should be no "garbage" in the beginning of CLI session
• Added Log window
• Print Operating System, Chrome, Configurator versions on startup
• Firmware flashing backend rework
• IHEX parser code rework
• Stronger input field validation (for most numeric fields)
• Added Battery warning / scale UI

2014.01.17 - 0.24

• Added Min Throttle, Failsafe Throttle UI
• Stronger Input validation
• Bugfixes

2014.01.04 - 0.23

• Various UI changes across the board

2013.12.29 - 0.22

• Added auto-connect feature (enabled by default)
• Bugfixes

2013.12.18 - 0.21

• Handle small screen resolutions more gracefully
• Bugfix for Servo tab save button & CAMSTAB

2013.12.16 - 0.20

• Minor iprovements & bugfixes

2013.12.09 - 0.19

• Added packet error counter in status bar
• Servos tab now also shows servos that belong to servo_tilt
• Potential bugfixes for STM32 flasher
• Minor iprovements & bugfixes

2013.11.26 - 0.18

• Removing Refresh button
• Ports are automatically pulled in the background
• Added Gimbal mixer suppor to Servos tab (experimental)
• Small UI changes related to connect sequence
• Added "error" user notifications if initial connect times out

2013.11.17 - 0.17

• Extensive work on Firmware Flasher & STM32 protocol
• Faster flashing speed (improvement of about 24%)
• Using separate thread for hex file parsing (multithreading)
• Bugfixes related to flashing gnu compiled .hex files

2013.11.14 - 0.16

• Minimum required Google Chrome / Chromium version is now 31
• Polished Firmware Flasher UI
• Bugfixes related to flashing rev5 naze boards

2013.11.14 - 0.15

• Added firmware flasher (currently supporting 2 modes)
• 1 - "local flashing", from a .hex file
• 2 - "online flashing", latest firmware is fetched from github.com

2013.11.12 - 0.14

• Re-Enabled Servos tab (hopefully with all problems sorted out)
• Added support for "Motor Testing Mode" in Motor/Servo Outputs tab
• Updated MSP
• Utilizing notification API to promote new app version updates

2013.11.10 - 0.13

• Disabling Servos tab until all bugs are ironed out
• Bugfixes

2013.11.09 - 0.12

• Bugfixes related to failing connect procedure
• Bugfixes related to GPS data types
• Implemented experimental Servos tab
• Updated MSP to the latest version
• Major MSP refactoring, improving reliability in some cases
• Initial notify implementation for critical errors

2013.11.02 - 0.11

• Debug values are now displayed and plotted in Sensor tab (dade)
• Command history in CLI tab (dade)
• Bugfixes related to GPS tab

2013.10.30 - 0.10

• AUX Configuration now shows current AUX channel state
• Polished couple of texts
• Added changelog within the app
• 3D view in Initial Setup now displays model type selected

2013.10.16 - 0.9

• Polished Auxiliary configuration tab
• Polished Raw sensod data tab
• Updated libraries