| Age | Commit message (Collapse) | Author |
|---|
|
This changes the iterator API so that flags can be passed in to
the constructor functions to control the ignore_case behavior.
At this point, the flags are not supported on tree iterators (i.e.
there is no functional change over the old API), but the API
changes are all made to accomodate this.
By the way, I went with a flags parameter because in the future
I have a couple of other ideas for iterator flags that will make
it easier to fix some diff/status/checkout bugs.
|
|
In preparation for further iterator changes, this cleans up a few
small things in the iterator API:
* removed the git_iterator_for_repo_index_range API
* made git_iterator_free not be inlined
* minor param name and test function name tweaks
|
|
|
|
The spoolandsort iterator changes got sort-of cherry picked out of
this branch and so I dropped the commit when rebasing; however,
there were a few small changes that got dropped as well (since the
version merged upstream wasn't quite the same as what I dropped).
|
|
Make checkout update entries in the index for all files that are
updated and/or removed, unless flag GIT_CHECKOUT_DONT_UPDATE_INDEX
is given. To do this, iterators were extended to allow a little
more introspection into the index being iterated over, etc.
|
|
An earlier change to `git_diff_from_iterators` introduced a
memory leak where the allocated spoolandsort iterator was not
returned to the caller and thus not freed.
One proposal changes all iterator APIs to use git_iterator** so
we can reallocate the iterator at will, but that seems unexpected.
This commit makes it so that an iterator can be changed in place.
The callbacks are isolated in a separate structure and a pointer
to that structure can be reassigned by the spoolandsort extension.
This means that spoolandsort doesn't create a new iterator; it
just allocates a new block of callbacks (along with space for its
own extra data) and swaps that into the iterator.
Additionally, since spoolandsort is only needed to switch the
case sensitivity of an iterator, this simplifies the API to only
take the ignore_case boolean and to be a no-op if the iterator
already matches the requested case sensitivity.
|
|
The `git_iterator_reset` command has not been working in all cases
particularly when there is a start and end range. This fixes it
and adds tests for it, and also extends it with the ability to
update the start/end range strings when an iterator is reset.
|
|
This removes the need to explicitly pass the repo into iterators
where the repo is implied by the other parameters. This moves
the repo to be owned by the parent struct. Also, this has some
iterator related updates to the internal diff API to lay the
groundwork for checkout improvements.
|
|
|
|
Ignore invalid entries by default
|
|
|
|
This fixes some missed places where we can apply const-ness to
various public APIs.
There are still some index and tree APIs that cannot take const
pointers because we sort our `git_vectors` lazily and so we can't
reliably bsearch the index and tree content without applying a
`git_vector_sort()` first.
This also fixes some missed places where size_t can be used and
where const can be applied to a couple internal functions.
|
|
|
|
|
|
The workdir iterator has always tried to ignore .git files, but
it turns out there were some bugs. This makes it more robust at
ignoring .git files.
This also makes iterators always check ".git" case insensitively
regardless of the properties of the system. This will make libgit2
skip ".GIT" and the like. This is different from core git, but on
systems with case insensitive but case preserving file systems,
allowing ".GIT" to be added is problematic.
|
|
The index iterator could previously only be created from a repo
object, but this allows creating an iterator from a `git_index`
object instead (while keeping, though renaming, the old function).
|
|
There are some diff functions that are useful in a rewritten
checkout and this lays some groundwork for that. This contains
three main things:
1. Share the function diff uses to calculate the OID for a file
in the working directory (now named `git_diff__oid_for_file`
2. Add a `git_diff__paired_foreach` function to iterator over
two diff lists concurrently. Convert status to use it.
3. Move all the string/prefix/index entry comparisons into
function pointers inside the `git_diff_list` object so they
can be switched between case sensitive and insensitive
versions. This makes them easier to reuse in various
functions without replicating logic. As part of this, move
a couple of index functions out of diff.c and into index.c.
|
|
This makes it so that the check if a file is ignored will be
deferred until requested on the workdir iterator, instead of
aggressively evaluating the ignore rules for each entry. This
should improve performance because there will be no need to
check ignore rules for files that are already in the index.
|
|
|
|
This started as a complex new test for checkout going through the
"typechanges" test repository, but that revealed numerous issues
with checkout, including:
* complete failure with submodules
* failure to create blobs with exec bits
* problems when replacing a tree with a blob because the tree
"example/" sorts after the blob "example" so the delete was
being processed after the single file blob was created
This fixes most of those problems and includes a number of other
minor changes that made it easier to do that, including improving
the TYPECHANGE support in diff/status, etc.
|
|
There are a few cases where diff should leave directories in
the diff list if we want to match core git, such as when the
directory contains a .git dir. That feature was lost when I
introduced some of the new submodule handling.
This restores that and then fixes a couple of related to diff
output that are triggered by having diffs with directories in
them.
Also, this adds a new flag that can be passed to diff if you
want diff output to actually include the file content of any
untracked files.
|
|
|
|
|
|
This is a big redesign of the git_submodule_status API and the
implementation of the redesigned API. It also fixes a number of
bugs that I found in other parts of the submodule API while
writing the tests for the status part.
This also fixes a couple of bugs in the iterators that had not
been noticed before - one with iterating when there is a gitlink
(i.e. separate-work-dir) and one where I was treating anything
even vaguely submodule-like as a submodule, more aggressively
than core git does.
|
|
Creating a workdir iterator on a directory with absolutely
no files was returning an error (GIT_ENOTFOUND) instead of
an iterator for nothing. This fixes that and includes two
new tests that cover that case.
|
|
|
|
The goal of this work is to rewrite git_status_file to use the
same underlying code as git_status_foreach.
This is done in 3 phases:
1. Extend iterators to allow ranged iteration with start and
end prefixes for the range of file names to be covered.
2. Improve diff so that when there is a pathspec and there is
a common non-wildcard prefix of the pathspec, it will use
ranged iterators to minimize excess iteration.
3. Rewrite git_status_file to call git_status_foreach_ext
with a pathspec that covers just the one file being checked.
Since ranged iterators underlie the status & diff implementation,
this is actually fairly efficient. The workdir iterator does
end up loading the contents of all the directories down to the
single file, which should ideally be avoided, but it is pretty
good.
|
|
When a repo is first created, there is no HEAD yet and attempting
to diff files in the index was showing nothing because a tree
iterator could not be constructed. This adds an "empty" iterator
and falls back on that when the head cannot be looked up.
|
|
When processing status for a newly checked out repo, it is
possible that there will be submodules that have not yet been
initialized. The only way to distinguish these from untracked
directories is to have some knowledge of submodules. This
commit adds a new submodule API which, given a name or path,
can determine if it appears to be a submodule and can give
information about the submodule.
|
|
There was an error in the tree iterator where it would
delete two tree levels instead of just one when popping
up a tree level. Unfortunately the test data for the
tree iterator did not have any deep trees with subtrees
in the middle of the tree items, so this problem went
unnoticed. This contains the 1-line fix plus new test
data and tests that reveal the issue.
|
|
This adds support for roughly-right tracking of submodules
(although it does not recurse into submodules to detect
internal modifications a la core git), and it adds support
for including unmodified files in diff iteration if requested.
|
|
This includes a few cleanups that came up while converting
these files.
This commit introduces a could new git error classes, including
the catchall class: GITERR_INVALID which I'm using as the class
for invalid and out of range values which are detected at too low
a level of library to use a higher level classification. For
example, an overflow error in parsing an integer or a bad letter
in parsing an OID string would generate an error in this class.
|
|
Also cleaned up some previously converted code that still had
little things to polish.
|
|
This converts blob.c, fileops.c, and all of the win32 files.
Also, various minor cleanups throughout the code. Plus, in
testing the win32 build, I cleaned up a bunch (although not
all) of the warnings with the 64-bit build.
|
|
|
|
This is a major reorganization of the diff code. This changes
the diff functions to use the iterators for traversing the
content. This allowed a lot of code to be simplified. Also,
this moved the functions relating to outputting a diff into a
new file (diff_output.c).
This includes a number of other changes - adding utility
functions, extending iterators, etc. plus more tests for the
diff code. This also takes the example diff.c program much
further in terms of emulating git-diff command line options.
|
|
Signed-off-by: schu <schu-github@schulog.org>
|
|
This update addresses all of the feedback in pull request #570.
The biggest change was to create actual linked list stacks for
storing the tree and workdir iterator state. This cleaned up
the code a ton. Additionally, all of the static functions had
their 'git_' prefix removed, and a lot of other unnecessary
changes were removed from the original patch.
|
|
This makes two changes to iterator behavior: first, advance
can optionally do the work of returning the new current value.
This is such a common pattern that it really cleans up usage.
Second, for workdir iterators, this removes automatically
iterating into directories. That seemed like a good idea,
but when an entirely new directory hierarchy is introduced
into the workdir, there is no reason to iterate into it if
there are no corresponding entries in the tree/index that it
is being compared to.
This second change actually wasn't a lot of code because not
descending into directories was already the behavior for
ignored directories. This just extends that to all directories.
|
|
This create a new git_iterator type of object that provides a
uniform interface for iterating over the index, an arbitrary
tree, or the working directory of a repository.
As part of this, git ignore support was extended to support
push and pop of directory-based ignore files as the working
directory is being traversed (so the array of ignores does
not have to be recreated at each directory during traveral).
There are a number of other small utility functions in buffer,
path, vector, and fileops that are included in this patch
that made the iterator implementation cleaner.
|
