# Copyright 2003, 2005, 2007 Dave Abrahams
# Copyright 2006, 2007 Rene Rivera
# Copyright 2003, 2004, 2005, 2006 Vladimir Prus
# Distributed under the Boost Software License, Version 1.0.
# (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt)

# This file is part of Boost Build version 2. You can think of it as forming the
# main() routine. It is invoked by the bootstrapping code in bootstrap.jam.

import build-request ;
import builtin ;
import "class" : new ;
import errors ;
import feature ;
import make ;
import modules ;
import os ;
import path ;
import project ;
import property-set ;
import regex ;
import sequence ;
import targets ;
import toolset ;
import utility ;
import version ;
import virtual-target ;
import generators ;
import configure ;

################################################################################
#
# Module global data.
#
################################################################################

# Shortcut used in this module for accessing used command-line parameters.
.argv = [ modules.peek : ARGV ] ;

# Flag indicating we should display additional debugging information related to
# locating and loading Boost Build configuration files.
.debug-config = [ MATCH ^(--debug-configuration)$ : $(.argv) ] ;

# Legacy option doing too many things, some of which are not even documented.
# Should be phased out.
#   * Disables loading site and user configuration files.
#   * Disables auto-configuration for toolsets specified explicitly on the
#     command-line.
#   * Causes --toolset command-line options to be ignored.
#   * Prevents the default toolset from being used even if no toolset has been
#     configured at all.
.legacy-ignore-config = [ MATCH ^(--ignore-config)$ : $(.argv) ] ;

# The cleaning is tricky. Say, if user says 'bjam --clean foo' where 'foo' is a
# directory, then we want to clean targets which are in 'foo' as well as those
# in any children Jamfiles under foo but not in any unrelated Jamfiles. To
# achieve this we collect a list of projects under which cleaning is allowed.
.project-targets = ;

# Virtual targets obtained when building main targets references on the command
# line. When running 'bjam --clean main_target' we want to clean only files
# belonging to that main target so we need to record which targets are produced
# for it.
.results-of-main-targets = ;

# Was an XML dump requested?
.out-xml = [ MATCH ^--out-xml=(.*)$ : $(.argv) ] ;

# Default toolset & version to be used in case no other toolset has been used
# explicitly by either the loaded configuration files, the loaded project build
# scripts or an explicit toolset request on the command line. If not specified,
# an arbitrary default will be used based on the current host OS. This value,
# while not strictly necessary, has been added to allow testing Boost-Build's
# default toolset usage functionality.
.default-toolset = ;
.default-toolset-version = ;


################################################################################
#
# Public rules.
#
################################################################################

# Returns the property set with the free features from the currently processed
# build request.
#
rule command-line-free-features ( )
{
    return $(.command-line-free-features) ;
}


# Returns the location of the build system. The primary use case is building
# Boost where it is sometimes needed to get the location of other components
# (e.g. BoostBook files) and it is convenient to use locations relative to the
# Boost Build path.
#
rule location ( )
{
    local r = [ modules.binding build-system ] ;
    return $(r:P) ;
}


# Sets the default toolset & version to be used in case no other toolset has
# been used explicitly by either the loaded configuration files, the loaded
# project build scripts or an explicit toolset request on the command line. For
# more detailed information see the comment related to used global variables.
#
rule set-default-toolset ( toolset : version ? )
{
    .default-toolset = $(toolset) ;
    .default-toolset-version = $(version) ;
}

rule set-pre-build-hook ( function )
{
    .pre-build-hook = $(function) ;
}

rule set-post-build-hook ( function )
{
    .post-build-hook = $(function) ;
}

################################################################################
#
# Local rules.
#
################################################################################

# Returns actual Jam targets to be used for executing a clean request.
#
local rule actual-clean-targets ( )
{
    # Construct a list of projects explicitly detected as targets on this build
    # system run. These are the projects under which cleaning is allowed.
    for local t in $(targets)
    {
        if [ class.is-a $(t) : project-target ]
        {
            .project-targets += [ $(t).project-module ] ;
        }
    }

    # Construct a list of targets explicitly detected on this build system run
    # as a result of building main targets.
    local targets-to-clean ;
    for local t in $(.results-of-main-targets)
    {
        # Do not include roots or sources.
        targets-to-clean += [ virtual-target.traverse $(t) ] ;
    }
    targets-to-clean = [ sequence.unique $(targets-to-clean) ] ;

    local to-clean ;
    for local t in [ virtual-target.all-targets ]
    {
        local p = [ $(t).project ] ;

        # Remove only derived targets.
        if [ $(t).action ]
        {
            if $(t) in $(targets-to-clean) ||
                [ should-clean-project [ $(p).project-module ] ] = true
            {
                to-clean += $(t) ;
            }
        }
    }

    local to-clean-actual ;
    for local t in $(to-clean)
    {
        to-clean-actual += [ $(t).actualize ] ;
    }
    return $(to-clean-actual) ;
}


# Given a target id, try to find and return the corresponding target. This is
# only invoked when there is no Jamfile in ".". This code somewhat duplicates
# code in project-target.find but we can not reuse that code without a
# project-targets instance.
#
local rule find-target ( target-id )
{
    local split = [ MATCH (.*)//(.*) : $(target-id) ] ;

    local pm ;
    if $(split)
    {
        pm = [ project.find $(split[1]) : "." ] ;
    }
    else
    {
        pm = [ project.find $(target-id) : "." ] ;
    }

    local result ;
    if $(pm)
    {
        result = [ project.target $(pm) ] ;
    }

    if $(split)
    {
        result = [ $(result).find $(split[2]) ] ;
    }

    return $(result) ;
}


# Initializes a new configuration module.
#
local rule initialize-config-module ( module-name : location ? )
{
    project.initialize $(module-name) : $(location) ;
    if USER_MODULE in [ RULENAMES ]
    {
        USER_MODULE $(module-name) ;
    }
}


# Helper rule used to load configuration files. Loads the first configuration
# file with the given 'filename' at 'path' into module with name 'module-name'.
# Not finding the requested file may or may not be treated as an error depending
# on the must-find parameter. Returns a normalized path to the loaded
# configuration file or nothing if no file was loaded.
#
local rule load-config ( module-name : filename : path + : must-find ? )
{
    if $(.debug-config)
    {
        ECHO "notice: Searching" "$(path)" "for" "$(module-name)"
            "configuration file" "$(filename)" "." ;
    }
    local where = [ GLOB $(path) : $(filename) ] ;
    if $(where)
    {
        where = [ NORMALIZE_PATH $(where[1]) ] ;
        if $(.debug-config)
        {
            ECHO "notice: Loading" "$(module-name)" "configuration file"
                "$(filename)" "from" $(where) "." ;
        }

        # Set source location so that path-constant in config files
        # with relative paths work. This is of most importance
        # for project-config.jam, but may be used in other
        # config files as well.
        local attributes = [ project.attributes $(module-name) ] ;
        $(attributes).set source-location : $(where:D) : exact ;
        modules.load $(module-name) : $(filename) : $(path) ;
        project.load-used-projects $(module-name) ;
    }
    else
    {
        if $(must-find)
        {
            errors.user-error "Configuration file" "$(filename)" "not found in"
                "$(path)" "." ;
        }
        if $(.debug-config)
        {
            ECHO "notice:" "Configuration file" "$(filename)" "not found in"
                "$(path)" "." ;
        }
    }
    return $(where) ;
}


# Loads all the configuration files used by Boost Build in the following order:
#
#   -- test-config --
#   Loaded only if specified on the command-line using the --test-config
# command-line parameter. It is ok for this file not to exist even if specified.
# If this configuration file is loaded, regular site and user configuration
# files will not be. If a relative path is specified, file is searched for in
# the current folder.
#
#   -- site-config --
#   Always named site-config.jam. Will only be found if located on the system
# root path (Windows), /etc (non-Windows), user's home folder or the Boost Build
# path, in that order. Not loaded in case the test-config configuration file is
# loaded or either the --ignore-site-config or the --ignore-config command-line
# option is specified.
#
#   -- user-config --
#   Named user-config.jam by default or may be named explicitly using the
# --user-config command-line option or the BOOST_BUILD_USER_CONFIG environment
# variable. If named explicitly the file is looked for from the current working
# directory and if the default one is used then it is searched for in the
# user's home directory and the Boost Build path, in that order. Not loaded in
# case either the test-config configuration file is loaded, --ignore-config
# command-line option is specified or an empty file name is explicitly
# specified. If the file name has been given explicitly then the file must
# exist.
#
# Test configurations have been added primarily for use by Boost Build's
# internal unit testing system but may be used freely in other places as well.
#
local rule load-configuration-files
{
    # Flag indicating that site configuration should not be loaded.
    local ignore-site-config =
        [ MATCH ^(--ignore-site-config)$ : $(.argv) ] ;

    if $(.legacy-ignore-config) && $(.debug-config)
    {
        ECHO "notice: Regular site and user configuration files will be ignored" ;
        ECHO "notice: due to the --ignore-config command-line option." ;
    }

    initialize-config-module test-config ;
    local test-config = [ MATCH ^--test-config=(.*)$ : $(.argv) ] ;
    local uq = [ MATCH \"(.*)\" : $(test-config) ] ;
    if $(uq)
    {
        test-config = $(uq) ;
    }
    if $(test-config)
    {
        local where =
            [ load-config test-config : $(test-config:BS) : $(test-config:D) ] ;
        if $(where)
        {
            if $(.debug-config) && ! $(.legacy-ignore-config)
            {
                ECHO "notice: Regular site and user configuration files will" ;
                ECHO "notice: be ignored due to the test configuration being"
                    "loaded." ;
            }
        }
        else
        {
            test-config = ;
        }
    }

    local user-path = [ os.home-directories ] [ os.environ BOOST_BUILD_PATH ] ;
    local site-path = /etc $(user-path) ;
    if [ os.name ] in NT CYGWIN
    {
        site-path = [ modules.peek : SystemRoot ] $(user-path) ;
    }

    if $(ignore-site-config) && !$(.legacy-ignore-config)
    {
        ECHO "notice: Site configuration files will be ignored due to the" ;
        ECHO "notice: --ignore-site-config command-line option." ;
    }

    initialize-config-module site-config ;
    if ! $(test-config) && ! $(ignore-site-config) && ! $(.legacy-ignore-config)
    {
        load-config site-config : site-config.jam : $(site-path) ;
    }

    initialize-config-module user-config ;
    if ! $(test-config) && ! $(.legacy-ignore-config)
    {
        local user-config = [ MATCH ^--user-config=(.*)$ : $(.argv) ] ;
        user-config = $(user-config[-1]) ;
        user-config ?= [ os.environ BOOST_BUILD_USER_CONFIG ] ;
        # Special handling for the case when the OS does not strip the quotes
        # around the file name, as is the case when using Cygwin bash.
        user-config = [ utility.unquote $(user-config) ] ;
        local explicitly-requested = $(user-config) ;
        user-config ?= user-config.jam ;

        if $(user-config)
        {
            if $(explicitly-requested)
            {
                # Treat explicitly entered user paths as native OS path
                # references and, if non-absolute, root them at the current
                # working directory.
                user-config = [ path.make $(user-config) ] ;
                user-config = [ path.root $(user-config) [ path.pwd ] ] ;
                user-config = [ path.native $(user-config) ] ;

                if $(.debug-config)
                {
                    ECHO "notice: Loading explicitly specified user"
                        "configuration file:" ;
                    ECHO "    $(user-config)" ;
                }

                load-config user-config : $(user-config:BS) : $(user-config:D)
                    : must-exist ;
            }
            else
            {
                load-config user-config : $(user-config) : $(user-path) ;
            }
        }
        else if $(.debug-config)
        {
            ECHO "notice: User configuration file loading explicitly disabled." ;
        }
    }
        
    # We look for project-config.jam from "." upward.
    # I am not sure this is 100% right decision, we might as well check for
    # it only alonside the Jamroot file. However:
    #
    # - We need to load project-root.jam before Jamroot
    # - We probably would need to load project-root.jam even if there's no
    #   Jamroot - e.g. to implement automake-style out-of-tree builds.
    local file = [ path.glob "." : project-config.jam ] ;
    if ! $(file)
    {
        file = [ path.glob-in-parents "." : project-config.jam ] ;
    }
    if $(file)
    {
        initialize-config-module project-config : $(file:D) ;
        load-config project-config : project-config.jam : $(file:D) ;        
    }   
}


# Autoconfigure toolsets based on any instances of --toolset=xx,yy,...zz or
# toolset=xx,yy,...zz in the command line. May return additional properties to
# be processed as if they had been specified by the user.
#
local rule process-explicit-toolset-requests
{
    local extra-properties ;

    local option-toolsets  = [ regex.split-list [ MATCH ^--toolset=(.*)$ : $(.argv) ] : "," ] ;
    local feature-toolsets = [ regex.split-list [ MATCH   ^toolset=(.*)$ : $(.argv) ] : "," ] ;

    for local t in $(option-toolsets) $(feature-toolsets)
    {
        # Parse toolset-version/properties.
        local (t-v,t,v) = [ MATCH (([^-/]+)-?([^/]+)?)/?.* : $(t) ] ;
        local toolset-version = $((t-v,t,v)[1]) ;
        local toolset = $((t-v,t,v)[2]) ;
        local version = $((t-v,t,v)[3]) ;

        if $(.debug-config)
        {
            ECHO notice: [cmdline-cfg] Detected command-line request for
                $(toolset-version): "toolset=" $(toolset) "version="
                $(version) ;
        }

        # If the toolset is not known, configure it now.
        local known ;
        if $(toolset) in [ feature.values <toolset> ]
        {
            known = true ;
        }
        if $(known) && $(version) && ! [ feature.is-subvalue toolset
            : $(toolset) : version : $(version) ]
        {
            known = ;
        }
        # TODO: we should do 'using $(toolset)' in case no version has been
        # specified and there are no versions defined for the given toolset to
        # allow the toolset to configure its default version. For this we need
        # to know how to detect whether a given toolset has any versions
        # defined. An alternative would be to do this whenever version is not
        # specified but that would require that toolsets correctly handle the
        # case when their default version is configured multiple times which
        # should be checked for all existing toolsets first.

        if ! $(known)
        {
            if $(.debug-config)
            {
                ECHO "notice: [cmdline-cfg] toolset $(toolset-version) not"
                    "previously configured; attempting to auto-configure now" ;
            }
            toolset.using $(toolset) : $(version) ;
        }
        else
        {
            if $(.debug-config)
            {
                ECHO notice: [cmdline-cfg] toolset $(toolset-version) already
                    configured ;
            }
        }

        # Make sure we get an appropriate property into the build request in
        # case toolset has been specified using the "--toolset=..." command-line
        # option form.
        if ! $(t) in $(.argv) && ! $(t) in $(feature-toolsets)
        {
            if $(.debug-config)
            {
                ECHO notice: [cmdline-cfg] adding toolset=$(t) to the build
                    request. ;
            }
            extra-properties += toolset=$(t) ;
        }
    }

    return $(extra-properties) ;
}


# Returns 'true' if the given 'project' is equal to or is a (possibly indirect)
# child to any of the projects requested to be cleaned in this build system run.
# Returns 'false' otherwise. Expects the .project-targets list to have already
# been constructed.
#
local rule should-clean-project ( project )
{
    if ! $(.should-clean-project.$(project))
    {
        local r = false ;
        if $(project) in $(.project-targets)
        {
            r = true ;
        }
        else
        {
            local parent = [ project.attribute $(project) parent-module ] ;
            if $(parent) && $(parent) != user-config
            {
                r = [ should-clean-project $(parent) ] ;
            }
        }
        .should-clean-project.$(project) = $(r) ;
    }

    return $(.should-clean-project.$(project)) ;
}


################################################################################
#
# main()
# ------
#
################################################################################

{    
    if --version in $(.argv)
    {
        version.print ;
        EXIT ;
    }
    
    version.verify-engine-version ;    
    
    load-configuration-files ;

    local extra-properties ;
    # Note that this causes --toolset options to be ignored if --ignore-config
    # is specified.
    if ! $(.legacy-ignore-config)
    {
        extra-properties = [ process-explicit-toolset-requests ] ;
    }


    # We always load project in "." so that 'use-project' directives have any
    # chance of being seen. Otherwise, we would not be able to refer to
    # subprojects using target ids.
    local current-project ;
    if [ project.find "." : "." ]
    {
        current-project = [ project.target [ project.load "." ] ] ;
    }


    # In case there are no toolsets currently defined makes the build run using
    # the default toolset.
    if ! $(.legacy-ignore-config) && ! [ feature.values <toolset> ]
    {
        local default-toolset = $(.default-toolset) ;
        local default-toolset-version = ;
        if $(default-toolset)
        {
            default-toolset-version = $(.default-toolset-version) ;
        }
        else
        {
            default-toolset = gcc ;
            if [ os.name ] = NT
            {
                default-toolset = msvc ;
            }
            else if [ os.name ] = MACOSX
            {
                default-toolset = darwin ;
            }                        
        }

        toolset.using $(default-toolset) : $(default-toolset-version) ;
    }


    # Parse command line for targets and properties. Note that this requires
    # that all project files already be loaded.
    local build-request = [ build-request.from-command-line $(.argv)
        $(extra-properties) ] ;
    local target-ids = [ $(build-request).get-at 1 ] ;
    local properties = [ $(build-request).get-at 2 ] ;


    # Expand properties specified on the command line into multiple property
    # sets consisting of all legal property combinations. Each expanded property
    # set will be used for a single build run. E.g. if multiple toolsets are
    # specified then requested targets will be built with each of them.
    if $(properties)
    {
        expanded = [ build-request.expand-no-defaults $(properties) ] ;
        local xexpanded ;
        for local e in $(expanded)
        {
            xexpanded += [ property-set.create [ feature.split $(e) ] ] ;
        }
        expanded = $(xexpanded) ;
    }
    else
    {
        expanded = [ property-set.empty ] ;
    }


    # Check that we actually found something to build.
    if ! $(current-project) && ! $(target-ids)
    {
        errors.user-error "error: no Jamfile in current directory found, and no"
            "target references specified." ;
        EXIT ;
    }


    # Flags indicating that this build system run has been started in order to
    # clean existing instead of create new targets. Note that these are not the
    # final flag values as they may get changed later on due to some special
    # targets being specified on the command line.
    local clean    ; if "--clean"     in $(.argv) { clean    = true ; }
    local cleanall ; if "--clean-all" in $(.argv) { cleanall = true ; }


    # List of explicitly requested files to build. Any target references read
    # from the command line parameter not recognized as one of the targets
    # defined in the loaded Jamfiles will be interpreted as an explicitly
    # requested file to build. If any such files are explicitly requested then
    # only those files and the targets they depend on will be built and they
    # will be searched for among targets that would have been built had there
    # been no explicitly requested files.
    local explicitly-requested-files


    # List of Boost Build meta-targets, virtual-targets and actual Jam targets
    # constructed in this build system run.
    local targets ;
    local virtual-targets ;
    local actual-targets ;


    # Process each target specified on the command-line and convert it into
    # internal Boost Build target objects. Detect special clean target. If no
    # main Boost Build targets were explictly requested use the current project
    # as the target.
    for local id in $(target-ids)
    {
        if $(id) = clean
        {
            clean = true ;
        }
        else
        {
            local t ;
            if $(current-project)
            {
                t = [ $(current-project).find $(id) : no-error ] ;
            }
            else
            {
                t = [ find-target $(id) ] ;
            }

            if ! $(t)
            {
                ECHO "notice: could not find main target" $(id) ;
                ECHO "notice: assuming it is a name of file to create." ;
                explicitly-requested-files += $(id) ;
            }
            else
            {
                targets += $(t) ;
            }
        }
    }
    if ! $(targets)
    {
        targets += [ project.target [ project.module-name "." ] ] ;
    }
    
    if [ option.get dump-generators : : true ] 
    {
        generators.dump ;
    }
    
    # We wish to put config.log in the build directory corresponding
    # to Jamroot, so that the location does not differ depending on
    # directory where we do build.  The amount of indirection necessary
    # here is scary.
    local first-project = [ $(targets[0]).project ] ;
    local first-project-root-location = [ $(first-project).get project-root ] ;
    local first-project-root-module = [ project.load $(first-project-root-location) ] ;
    local first-project-root = [ project.target  $(first-project-root-module) ] ;
    local first-build-build-dir = [ $(first-project-root).build-dir ] ;
    configure.set-log-file $(first-build-build-dir)/config.log ;
    
    # Now that we have a set of targets to build and a set of property sets to
    # build the targets with, we can start the main build process by using each
    # property set to generate virtual targets from all of our listed targets
    # and any of their dependants.
    for local p in $(expanded)
    {
        .command-line-free-features = [ property-set.create [ $(p).free ] ] ;
        for local t in $(targets)
        {
            local g = [ $(t).generate $(p) ] ;
            if ! [ class.is-a $(t) : project-target ]
            {
                .results-of-main-targets += $(g[2-]) ;
            }
            virtual-targets += $(g[2-]) ;
        }
    }


    # Convert collected virtual targets into actual raw Jam targets.
    for t in $(virtual-targets)
    {
        actual-targets += [ $(t).actualize ] ;
    }


    # If XML data output has been requested prepare additional rules and targets
    # so we can hook into Jam to collect build data while its building and have
    # it trigger the final XML report generation after all the planned targets
    # have been built.
    if $(.out-xml)
    {
        # Get a qualified virtual target name.
        rule full-target-name ( target )
        {
            local name = [ $(target).name ] ;
            local project = [ $(target).project ] ;
            local project-path = [ $(project).get location ] ;
            return $(project-path)//$(name) ;
        }

        # Generate an XML file containing build statistics for each constituent.
        #
        rule out-xml ( xml-file : constituents * )
        {
            # Prepare valid XML header and footer with some basic info.
            local nl = "
" ;
            local os        = [ modules.peek : OS OSPLAT JAMUNAME ] "" ;
            local timestamp = [ modules.peek : JAMDATE ] ;
            local cwd       = [ PWD ] ;
            local command   = $(.argv) ;
            local bb-version = [ version.boost-build ] ;
            .header on $(xml-file) =
                "<?xml version=\"1.0\" encoding=\"utf-8\"?>"
                "$(nl)<build format=\"1.0\" version=\"$(bb-version)\">"
                "$(nl)  <os name=\"$(os[1])\" platform=\"$(os[2])\"><![CDATA[$(os[3-]:J= )]]></os>"
                "$(nl)  <timestamp><![CDATA[$(timestamp)]]></timestamp>"
                "$(nl)  <directory><![CDATA[$(cwd)]]></directory>"
                "$(nl)  <command><![CDATA[\"$(command:J=\" \")\"]]></command>"
                ;
            .footer on $(xml-file) =
                "$(nl)</build>" ;

            # Generate the target dependency graph.
            .contents on $(xml-file) +=
                "$(nl)  <targets>" ;
            for local t in [ virtual-target.all-targets ]
            {
                local action = [ $(t).action ] ;
                if $(action)
                    # If a target has no action, it has no dependencies.
                {
                    local name = [ full-target-name $(t) ] ;
                    local sources = [ $(action).sources ] ;
                    local dependencies ;
                    for local s in $(sources)
                    {
                        dependencies += [ full-target-name $(s) ] ;
                    }

                    local path = [ $(t).path ] ;
                    local jam-target = [ $(t).actual-name ] ;

                    .contents on $(xml-file) +=
                        "$(nl)    <target>"
                        "$(nl)      <name><![CDATA[$(name)]]></name>"
                        "$(nl)      <dependencies>"
                        "$(nl)        <dependency><![CDATA[$(dependencies)]]></dependency>"
                        "$(nl)      </dependencies>"
                        "$(nl)      <path><![CDATA[$(path)]]></path>"
                        "$(nl)      <jam-target><![CDATA[$(jam-target)]]></jam-target>"
                        "$(nl)    </target>"
                        ;
                }
            }
            .contents on $(xml-file) +=
                "$(nl)  </targets>" ;

            # Build $(xml-file) after $(constituents). Do so even if a
            # constituent action fails and regenerate the xml on every bjam run.
            INCLUDES $(xml-file) : $(constituents) ;
            ALWAYS $(xml-file) ;
            __ACTION_RULE__ on $(xml-file) = build-system.out-xml.generate-action ;
            out-xml.generate $(xml-file) ;
        }

        # The actual build actions are here; if we did this work in the actions
        # clause we would have to form a valid command line containing the
        # result of @(...) below (the name of the XML file).
        #
        rule out-xml.generate-action ( args * : xml-file
            : command status start end user system : output ? )
        {
            local contents =
                [ on $(xml-file) return $(.header) $(.contents) $(.footer) ] ;
            local f = @($(xml-file):E=$(contents)) ;
        }

        # Nothing to do here; the *real* actions happen in
        # out-xml.generate-action.
        actions quietly out-xml.generate { }

        # Define the out-xml file target, which depends on all the targets so
        # that it runs the collection after the targets have run.
        out-xml $(.out-xml) : $(actual-targets) ;

        # Set up a global __ACTION_RULE__ that records all the available
        # statistics about each actual target in a variable "on" the --out-xml
        # target.
        #
        rule out-xml.collect ( xml-file : target : command status start end user
            system : output ? )
        {
            local nl = "
" ;
            # Open the action with some basic info.
            .contents on $(xml-file) +=
                "$(nl)  <action status=\"$(status)\" start=\"$(start)\" end=\"$(end)\" user=\"$(user)\" system=\"$(system)\">" ;

            # If we have an action object we can print out more detailed info.
            local action = [ on $(target) return $(.action) ] ;
            if $(action)
            {
                local action-name    = [ $(action).action-name ] ;
                local action-sources = [ $(action).sources     ] ;
                local action-props   = [ $(action).properties  ] ;

                # The qualified name of the action which we created the target.
                .contents on $(xml-file) +=
                    "$(nl)    <name><![CDATA[$(action-name)]]></name>" ;

                # The sources that made up the target.
                .contents on $(xml-file) +=
                    "$(nl)    <sources>" ;
                for local source in $(action-sources)
                {
                    local source-actual = [ $(source).actual-name ] ;
                    .contents on $(xml-file) +=
                        "$(nl)      <source><![CDATA[$(source-actual)]]></source>" ;
                }
                .contents on $(xml-file) +=
                    "$(nl)    </sources>" ;

                # The properties that define the conditions under which the
                # target was built.
                .contents on $(xml-file) +=
                    "$(nl)    <properties>" ;
                for local prop in [ $(action-props).raw ]
                {
                    local prop-name = [ MATCH ^<(.*)>$ : $(prop:G) ] ;
                    .contents on $(xml-file) +=
                        "$(nl)      <property name=\"$(prop-name)\"><![CDATA[$(prop:G=)]]></property>" ;
                }
                .contents on $(xml-file) +=
                    "$(nl)    </properties>" ;
            }

            local locate = [ on $(target) return $(LOCATE) ] ;
            locate ?= "" ;
            .contents on $(xml-file) +=
                "$(nl)    <jam-target><![CDATA[$(target)]]></jam-target>"
                "$(nl)    <path><![CDATA[$(target:G=:R=$(locate))]]></path>"
                "$(nl)    <command><![CDATA[$(command)]]></command>"
                "$(nl)    <output><![CDATA[$(output)]]></output>" ;
            .contents on $(xml-file) +=
                "$(nl)  </action>" ;
        }

        # When no __ACTION_RULE__ is set "on" a target, the search falls back to
        # the global module.
        module
        {
            __ACTION_RULE__ = build-system.out-xml.collect
                [ modules.peek build-system : .out-xml ] ;
        }
        
        IMPORT
            build-system :
            out-xml.collect
            out-xml.generate-action
            : :
            build-system.out-xml.collect
            build-system.out-xml.generate-action
            ;
    }

    local j = [ option.get jobs ] ;
    if $(j)
    {
        modules.poke : PARALLELISM : $(j) ;
    }
    
    local k = [ option.get keep-going : true : true ] ;
    if $(k) in "on" "yes" "true"
    {
        modules.poke : KEEP_GOING : 1 ;
    }
    else if $(k) in "off" "no" "false"
    {
        modules.poke : KEEP_GOING : 0 ;
    }
    else
    {
        ECHO "error: Invalid value for the --keep-going option" ;
        EXIT ;
    }
                
    # The 'all' pseudo target is not strictly needed expect in the case when we
    # use it below but people often assume they always have this target
    # available and do not declare it themselves before use which may cause
    # build failures with an error message about not being able to build the
    # 'all' target.
    NOTFILE all ;

    # And now that all the actual raw Jam targets and all the dependencies
    # between them have been prepared all that is left is to tell Jam to update
    # those targets.
    if $(explicitly-requested-files)
    {
        # Note that this case can not be joined with the regular one when only
        # exact Boost Build targets are requested as here we do not build those
        # requested targets but only use them to construct the dependency tree
        # needed to build the explicitly requested files.
        UPDATE $(explicitly-requested-files:G=e) $(.out-xml) ;
    }
    else if $(cleanall)
    {
        UPDATE clean-all ;
    }
    else if $(clean)
    {
        common.Clean clean : [ actual-clean-targets ] ;
        UPDATE clean ;
    }
    else
    {      
        configure.print-configure-checks-summary ;        
        
        if $(.pre-build-hook)
        {
            $(.pre-build-hook) ;
        }
        
        DEPENDS all : $(actual-targets) ;
        if UPDATE_NOW in [ RULENAMES ]
        {            
            local ok = [ UPDATE_NOW all $(.out-xml) ] ;
            if $(.post-build-hook)
            {
                $(.post-build-hook) $(ok) ;
            }
            # Prevent automatic update of the 'all' target, now that
            # we have explicitly updated what we wanted.
            UPDATE ;
        }
        else
        {
            UPDATE all $(.out-xml) ;
        }            
    }
}