AudioOutput 0 0 546 669 Audio output Interface System qcbSystem 0 0 Output method for audio This is the output method to use for audio. Qt::Horizontal QSizePolicy::Maximum 24 16 Device qcbDevice 1 0 Output device for audio This is the output device to use for audio. MUComboBox::AdjustToMinimumContentsLength 16 true 0 27 Exclusive mode, not recommended. This opens the device in exclusive mode. No other application will be able to use the device. Exclusive Positional Audio Audio Output Default &Jitter Buffer qsJitter Safety margin for jitter buffer This sets the minimum safety margin for the jitter buffer. All incoming audio is buffered, and the jitter buffer continually tries to push the buffer to the minimum sustainable by your network, so latency can be as low as possible. This sets the minimum buffer size to use. If the start of sentences you hear is very jittery, increase this value. 1 5 2 Qt::Horizontal 40 0 jb Volume of incoming speech This adjusts the volume of incoming speech. Note that if you increase this beyond 100%, audio will be distorted. 0 200 100 Qt::Horizontal Volume qsVolume vol Output Delay qsDelay Amount of data to buffer This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn't cause rapid jitter in the sound. 1 10 3 Qt::Horizontal Attenuation of other applications during speech Attenuate volume of other applications during speech Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This sets the attenuation of other applications if the feature is enabled. 0 100 0 Qt::Horizontal od at Attenuate applications by... Qt::AlignLeading|Qt::AlignLeft|Qt::AlignTop true qsOtherVolume If checked Mumble lowers the volume of other applications while other users talk Attenuate applications while other users talk Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while other users talk to you. while other users talk If checked Mumble lowers the volume of other applications while you talk Attenuate applications while you talk Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while you talk. while you talk Advanced Attenuation Options If checked, Mumble will only attenuate applications that are using the same output source as Mumble Attenuate only applications using the same output as Mumble If checked, applications that use a different output than Mumble will not be attenuated. Only attenuate applications using the same output device If checked, PulseAudio loopback modules will be attenuated Attenuate PulseAudio loopback modules If loopback modules are linked to Mumble's output device/sink, they will also be attenuated. Attenuate PulseAudio loopback modules Priority Speaker If checked Mumble lowers the volume of other users while you talk if you have the "Priority Speaker" status. Attenuate other users while talking as Priority Speaker Mumble supports decreasing the volume of other users while you talk as the Priority Speaker to avoid getting disturbed. Checking this checkbox will enable this feature. Attenuate other users while talking as Priority Speaker true Positional Audio The connected "speakers" are actually headphones Checking this indicates that you don't have speakers connected, just headphones. This is important, as speakers are usually in front of you, while headphones are directly to your left/right. Headphones Minimum Distance qsMinDistance Minimum distance to user before sound volume decreases This sets the minimum distance for sound calculations. The volume of other users' speech will not decrease until they are at least this far away from you. 10 200 Qt::Horizontal 40 0 md Maximum Distance qsMaxDistance Maximum distance, beyond which speech volume won't decrease This sets the maximum distance for sound calculations. When farther away than this, other users' speech volume will not decrease any further. 10 1000 Qt::Horizontal 40 0 md Minimum Volume qsMaxDistVolume Factor for sound volume decrease What should the volume be at the maximum distance? 100 Qt::Horizontal 40 0 mv Bloom qsMaxDistVolume 40 0 bl Factor for sound volume increase How much should sound volume increase for sources that are really close? 0 75 Qt::Horizontal Loopback Test Delay Variance qsPacketDelay Variance in packet latency This sets the packet latency variance for loopback testing. Most audio paths contain some variable latency. This allows you to set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms. 100 Qt::Horizontal 40 0 dv Packet Loss qsPacketLoss Packet loss for loopback mode This sets the packet loss for loopback mode. This will be the ratio of packets lost. Unless your outgoing bandwidth is peaked or there's something wrong with your network connection, this will be 0% 50 5 20 Qt::Horizontal 40 0 pl &Loopback qcbLoopback Desired loopback mode This enables one of the loopback test modes. None - Loopback disabled Local - Emulate a local server. Server - Request loopback from server. Please note than when loopback is enabled, no other users will hear your voice. This setting is not saved on application exit. Qt::Vertical 20 40 qcbSystem qcbDevice qcbPositional qsJitter qsVolume qsDelay qcbHeadphones qsMinDistance qsBloom qsMaxDistance qsMaxDistVolume qcbLoopback qsPacketDelay qsPacketLoss MUComboBox QComboBox

widgets/MUComboBox.h