ACLEditor
Deny
Atal
Allow
Caniatau
Allow %1
Caniatau &1
Deny %1
Gwadu %1
Mumble - Add channel
Mumble - Ychwanegu sianel
Default server value
Failed: Invalid channel
Methwyd: Sianel annilys
Mumble - Edit %1
Mumble - Golygu &1
ID: %1
ID: &1
This grants the %1 privilege. If a privilege is both allowed and denied, it is denied.<br />%2
Channel must have a name
Rhaid i'r sianel gael enw
This revokes the %1 privilege. If a privilege is both allowed and denied, it is denied.<br />%2
Dialog
Deialog
Name
Enw
Enter the channel name here.
Gosodwch enw'r sianel yn yr fan hyn
Description
Disgrifiad
Password
Cyfrinair
Enter the channel password here.
Rhowch gyfrinair y sianel yn y fan hon
Check to create a temporary channel.
Ticiwch er mwyn creu sianel dros dro.
Temporary
Dros dro
<b>Position</b><br/>
This value enables you to change the way Mumble arranges the channels in the tree. A channel with a higher <i>Position</i> value will always be placed below one with a lower value and the other way around. If the <i>Position</i> value of two channels is equal they will get sorted alphabetically by their name.
<b>Position</b><br/>
This value enables you to change the way mumble arranges the channels in the tree. A channel with a higher <i>Position</i> value will always be placed below one with a lower value and the other way around. If the <i>Position</i> value of two channels is equal they will get sorted alphabetically by their name.
Position
Lleoliad
&Groups
&Grwpiau
Group
Grŵp
List of groups
Rhestr o'r holl grwpiau
Remove selected group
Dileu'r grŵp dethol
Remove
Dileu
Inherit group members from parent
Etifeddu aelodau'r grŵp o'r rhiant
Inherit
Etifeddu
Make group inheritable to sub-channels
Gwneud yr grŵp yn etifeddadwy i is-sianeli
Inheritable
Etifeiddadwy
Group was inherited from parent channel
Roedd y grŵp wedi ei etifeddu o sianel rhiant
Inherited
Wedi ei etifeddu
Members
Aelodau
Add
Ychwanegu
Add member to group
Ychwanegu aelod i'r grŵp
Remove member from group
Dileu aelod o'r grŵp
&ACL
&ACL
Active ACLs
ACLs gweithgar
List of entries
Rhestr o gofnodion
Inherit ACL of parent?
Etifeddu ACL yr rhiant?
This sets whether or not the ACL up the chain of parent channels are applied to this object. Only those entries that are marked in the parent as "Apply to sub-channels" will be inherited.
Inherit ACLs
Etifeddu ACLs
Move entry up
Symud yr cofnod i fyny
This moves the entry up in the list. As entries are evaluated in order, this may change the effective permissions of users. You cannot move an entry above an inherited entry, if you really need that you'll have to duplicate the inherited entry.
&Up
&I Fyny
Move entry down
Symyd yr cofnod i lawr
This moves the entry down in the list. As entries are evaluated in order, this may change the effective permissions of users.
&Down
&I Lawr
Add new entry
Ychwanegu cofnod newydd
This adds a new entry, initially set with no permissions and applying to all.
&Add
&Ychwanegu
Remove entry
Dileu'r cofnod
This removes the currently selected entry.
Mae hyn yn dileu'r cofnod a detholwyd
&Remove
&Dileu
Context
Cyd-destun
Entry should apply to this channel.
Entry should apply to this channel
Dyla'r cofnod bod yn berthnasol i'r sianel hon
This makes the entry apply to this channel.
Mae hyn yn achosi i'r cofnod bod yn berthnasol i'r sianel hon.
Applies to this channel
Yn berthansol i'r sianel hon
Entry should apply to sub-channels.
Dyla'r cofnod bod yn berthansol i is-sianeli.
Add new group
Ychwanegu grŵp newydd
<b>Add</b><br/>
Add a new group.
<b>Ychwanegu</b><br/>
Ychwanegu grŵp newydd.
Inherited members
Aelodau a etifeddwyd
Contains the list of members added to the group by this channel.
Yn cynnwys rhestr o aelodau a ychwanegwyd i'r grŵp gan yr sianel hon.
Contains a list of members whose group membership will not be inherited from the parent channel.
Yn cynnwys rhestr o aelodau a ni fyd yn etifeddu ei aelodaeth grŵp o'r sianel rhiant.
Contains the list of members inherited by other channels.
Yn cynnwys y rhestr o aelodau a etifeddwyd gan sianeli eraill.
Type in the name of a user you wish to add to the group and click Add.
Teipiwch enw defnyddiwr rydach yn dymuno ychwanegu i'r grŵp a phwyswch Ychwanegu.
Type in the name of a user you wish to remove from the group and click Add.
Teipiwch enw defnyddiwr rydach yn dymuno tynnu o'r grŵp a phwyswch Ychwanegu.
Exclude
Eithrio
Excluded members
Aelodau wedi'i hallgau
This makes the entry apply to sub-channels of this channel.
Mae hyn yn achosi i'r cofnod bod yn berthnasol i is-sianeli y sianel hon.
Applies to sub-channels
Yn berthnasol i is-sianeli
Permissions
Hawliau
User/Group
Defnyddiwr/Grŵp
Group this entry applies to
User ID
ID yr defnyddiwr
User this entry applies to
This controls which user this entry applies to. Just type in the user name and hit enter to query the server for a match.
&Properties
&Priodweddau
<b>Name</b><br />Enter the channel name in this field. The name has to comply with the restriction imposed by the server you are connected to.
<b>Temporary</b><br />
When checked the channel created will be marked as temporary. This means when the last player leaves it the channel will be automatically deleted by the server.
<b>Group</b><br />
These are all the groups currently defined for the channel. To create a new group, just type in the name and press enter.
<b>Remove</b><br />This removes the currently selected group. If the group was inherited, it will not be removed from the list, but all local information about the group will be cleared.
<b>Inherit</b><br />This inherits all the members in the group from the parent, if the group is marked as <i>Inheritable</i> in the parent channel.
<b>Inheritable</b><br />This makes this group inheritable to sub-channels. If the group is non-inheritable, sub-channels are still free to create a new group with the same name.
<b>Inherited</b><br />This indicates that the group was inherited from the parent channel. You cannot edit this flag, it's just for information.
<b>Members</b><br />
This list contains all members that were added to the group by the current channel. Be aware that this does not include members inherited by higher levels of the channel tree. These can be found in the <i>Inherited members</i> list. To prevent this list to be inherited by lower level channels uncheck <i>Inheritable</i> or manually add the members to the <i>Excluded members</i> list.
<b>Excluded members</b><br />
Contains a list of members whose group membership will not be inherited from the parent channel.
<b>Inherited members</b><br />
Contains the list of members inherited by the current channel. Uncheck <i>Inherit</i> to prevent inheritance from higher level channels.
This controls which group of users this entry applies to.<br />Note that the group is evaluated in the context of the channel the entry is used in. For example, the default ACL on the Root channel gives <i>Write</i> permission to the <i>admin</i> group. This entry, if inherited by a channel, will give a user write privileges if he belongs to the <i>admin</i> group in that channel, even if he doesn't belong to the <i>admin</i> group in the channel where the ACL originated.<br />If a group name starts with '!', its membership is negated, and if it starts with '~', it is evaluated in the channel the ACL was defined in, rather than the channel the ACL is active in.<br />If a group name starts with '#', it is interpreted as an access token. Users must have entered whatever follows the '#' in their list of access tokens to match. This can be used for very simple password access to channels for non-authenticated users.<br />If a group name starts with '$', it will only match users whose certificate hash matches what follows the '$'.<br />A few special predefined groups are:<br /><b>all</b> - Everyone will match.<br /><b>auth</b> - All authenticated users will match.<br /><b>sub,a,b,c</b> - User currently in a sub-channel minimum <i>a</i> common parents, and between <i>b</i> and <i>c</i> channels down the chain. See the website for more extensive documentation on this one.<br /><b>in</b> - Users currently in the channel will match (convenience for '<i>sub,0,0,0</i>').<br /><b>out</b> - Users outside the channel will match (convenience for '<i>!sub,0,0,0</i>').<br />Note that an entry applies to either a user or a group, not both.
<b>Password</b><br />This field allows you to easily set and change the password of a channel. It uses Mumble's access tokens feature in the background. Use ACLs and groups if you need more fine grained and powerful access control.
This shows all the entries active on this channel. Entries inherited from parent channels will be shown in italics.<br />ACLs are evaluated top to bottom, meaning priority increases as you move down the list.
ID of the channel.
ID yr sianel.
Maximum Users
Maximum number of users allowed in the channel
<b>Maximum Users</b><br />
This value allows you to set the maximum number of users allowed in the channel. If the value is above zero, only that number of users will be allowed to enter the channel. If the value is zero, the maximum number of users in the channel is given by the server's default limit.
This is the sort order for the channel.
Properties
Channel password
Maximum users
Channel name
Inherited group members
Foreign group members
Inherited channel members
Add members to group
List of ACL entries
ALSAAudioInput
Default ALSA Card
Cerdyn Diofyn ALSA
Opening chosen ALSA Input failed: %1
Methodd agor yr Mewnbwn ALSA a dewiswyd: %1
ALSAAudioOutput
Default ALSA Card
Cerdyn Diofyn ALSA
Opening chosen ALSA Output failed: %1
Methodd agor yr Mewnbwn ALSA a dewiswyd: %1
ALSAEnumerator
Getting name (longname) of the sound card failed: %1
Getting name of the sound card failed: %1
ASIOConfig
%1 (version %2)
%1 (fersiwn %2)
%1 -> %2 samples buffer, with %3 sample resolution (%4 preferred) at %5 Hz
%1 -> %2 samples buffer, with %3 sample resolution (%4 preferred) at %5Hz
ASIO Initialization failed: %1
Failed to instantiate ASIO driver
ASIO
ASIO
Device selection
Dewis dyfais
Device
Dyfais
Device to use for microphone
Dyfais i ddefnyddio fel meicroffon
This chooses what device to query. You still need to actually query the device and select which channels to use.
Mae hyn yn dewis pa ddyfais i ymholi. Rydach dal angen ymholi'r ddyfais a dewis pa sianel i'w ddefnyddio.
Query selected device
Ymholi'r ddyfais a dewiswyd
This queries the selected device for channels. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.
Mae hyn yn ymholi'r ddyfais a dewiswyd ar gyfer sianeli. Byddwch yn ymwybodol bod llawer o yrwyr ASIO yn debygol o gau'r rhaglen neu'r system os rydach yn ei ymholi.
&Query
&Ymholi
Configure selected device
Ffurfweddwch y ddyfais a dewiswyd
This configures the selected device. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.
&Configure
Capabilities
Driver name
Buffer size
This will configure the input channels for ASIO. Make sure you select at least one channel as microphone and speaker. <i>Microphone</i> should be where your microphone is attached, and <i>Speaker</i> should be a channel that samples '<i>What you hear</i>'.<br />For example, on the Audigy 2 ZS, a good selection for Microphone would be '<i>Mic L</i>' while Speaker should be '<i>Mix L</i>' and '<i>Mix R</i>'.
Configure input channels
Channels
Sianeli
Microphone
Meicroffon
<-
<-
->
->
Unused
Heb eu defnyddio
Speakers
Seinyddion
List of microphones
List of speakers
ASIOInput
You need to select at least one microphone and one speaker source to use ASIO.
Opening selected ASIO device failed. No input will be done.
AboutDialog
About Mumble
Am Mumble
&About Mumble
&Am Mumble
&License
&Trwydded
A&uthors
&Third-Party Licenses
OK
Iawn
License agreement
Authors
Third-party license agreements
<h3>Mumble (%1)</h3><p>%3</p><p><b>An Open Source, low-latency, high quality voice-chat utility</b></p><p><tt><a href="%2">%2</a></tt></p>
AudioInput
Interface
Rhyngwyneb
System
System
Input method for audio
Dull mewnbwn ar gyfer sain
Device
Dyfais
Input device for audio
Dyfais mewnbwn ar gyfer sain
<b>This is the input device to use for audio.</b>
<b>Hwn yw'r dull mewnbwn ar gyfer sain.</b>
Transmission
&Transmit
When to transmit your speech
<b>This sets when speech should be transmitted.</b><br /><i>Continuous</i> - All the time<br /><i>Voice Activity</i> - When you are speaking clearly.<br /><i>Push To Talk</i> - When you hold down the hotkey set under <i>Shortcuts</i>.
DoublePush Time
If you press the PTT key twice in this time it will get locked.
<b>DoublePush Time</b><br />If you press the push-to-talk key twice during the configured interval of time it will be locked. Mumble will keep transmitting until you hit the key once more to unlock PTT again.
Reset audio cue to default
<b>Reset</b><br/>Reset the paths for the files to their default.
Browse for on audio file
Browse for off audio file
Off
I Ffwrdd
On
Ymlaen
Preview the audio cues
Use SNR based speech detection
Signal to Noise
Signal i Sŵn
<b>This sets speech detection to use Amplitude.</b><br />In this mode, the raw strength of the input signal is used to detect speech.
Amplitude
Voice &Hold
Llais &Dal
How long to keep transmitting after silence
Silence Below
Distawrwydd o dan
<b>This sets the trigger values for voice detection.</b><br />Use this together with the Audio Statistics window to manually tune the trigger values for detecting speech. Input values below "Silence Below" always count as silence. Values above "Speech Above" always count as voice. Values in between will count as voice if you're already talking, but will not trigger a new detection.
Speech Above
Llais os yw'n uwch
Signal values above this count as voice
Compression
Cywasgu
&Quality
&Ansawdd
Quality of compression (peak bandwidth)
<b>This sets the quality of compression.</b><br />This determines how much bandwidth Mumble is allowed to use for outgoing audio.
Audio per packet
Sain bob paced
How many audio frames to send per packet
<b>This selects how many audio frames should be put in one packet.</b><br />Increasing this will increase the latency of your voice, but will also reduce bandwidth requirements.
<b>This shows peak outgoing bandwidth used.</b><br />This shows the peak amount of bandwidth sent out from your machine. Audio bitrate is the maximum bitrate (as we use VBR) for the audio data alone. Position is the bitrate used for positional information. Overhead is our framing and the IP packet headers (IP and UDP is 75% of this overhead).
Audio Processing
Noise suppression
<b>This sets the amount of noise suppression to apply.</b><br />The higher this value, the more aggressively stationary noise will be suppressed.
Maximum amplification of input sound
<b>Maximum amplification of input.</b><br />Mumble normalizes the input volume before compressing, and this sets how much it's allowed to amplify.<br />The actual level is continually updated based on your current speech pattern, but it will never go above the level specified here.<br />If the <i>Microphone loudness</i> level of the audio statistics hover around 100%, you probably want to set this to 2.0 or so, but if, like most people, you are unable to reach 100%, set this to something much higher.<br />Ideally, set it so <i>Microphone Loudness * Amplification Factor >= 100</i>, even when you're speaking really soft.<br /><br />Note that there is no harm in setting this to maximum, but Mumble will start picking up other conversations if you leave it to auto-tune to that level.
Current speech detection chance
Enabling this will cancel the echo from your speakers. Mixed has low CPU impact, but only works well if your speakers are equally loud and equidistant from the microphone. Multichannel echo cancellation provides much better echo cancellation, but at a higher CPU cost.
Disabled
<b>This sets speech detection to use Signal to Noise ratio.</b><br />In this mode, the input is analyzed for something resembling a clear signal, and the clarity of that signal is used to trigger speech detection.
<b>This shows the current speech detection settings.</b><br />You can change the settings from the Settings dialog or from the Audio Wizard.
Signal values below this count as silence
Maximum bandwidth used for sending audio
Use Amplitude based speech detection
<b>This selects how long after a perceived stop in speech transmission should continue.</b><br />Set this higher if your voice breaks up when you speak (seen by a rapidly blinking voice icon next to your name).
Exclusive mode
<b>This opens the device in exclusive mode.</b><br />No other application will be able to use the device.
Exclusive
R&eset
&Browse...
&Pori
B&rowse...
&Preview
<b>Preview</b><br/>Plays the current <i>on</i> sound followed by the current <i>off</i> sound.
Displays an always on top window with a push to talk button in it
Display push to talk window
Misc
Audible audio cue when starting or stopping to transmit
<b>This enables transmission audio cues.</b><br />Setting this will give you a short audio beep when you start and stop transmitting.
Audio cue
Gets played when starting to transmit
Gets played when stopping to transmit
Hold Time
Time the microphone stays open after the PTT key is released
Server maximum network bandwidth is only %1 kbit/s. Audio quality auto-adjusted to %2 kbit/s (%3 ms)
Max. Amplification
Idle action
minutes do
nothing
deafen
mute
after
Echo Cancellation
The idle action will be reversed upon any key or mouse button input
Undo Idle action upon activity
Audio input
<b>This is the input method to use for audio.</b>
Enable Opus' low-delay mode when the quality is set to <b>64 kb/s</b> or higher.
If checked, Mumble will enable Opus' low-delay mode when the quality is set to <b>64 kbit/s</b> or higher. Low-delay mode decreases latency by <b>~15 milliseconds</b> in the round trip. This mode may require an higher bitrate to preserve the same quality, in comparison with the music and VOIP modes.
Allow low delay mode
Don't use noise suppression.
Use the noise suppression algorithm provided by Speex.
Use the noise suppression algorithm provided by RNNoise.
Use a combination of Speex and RNNoise to do noise suppression.
Both
This controls the amount by which Speex will suppress noise.
Speex suppression strength
AudioInputDialog
Continuous
Voice Activity
Push To Talk
Audio Input
%1 ms
%1 me
Off
%1 s
%1 kb/s
-%1 dB
%1 kbit/s (Audio %2, Position %4, Overhead %3)
Audio system
Input device
Echo cancellation mode
Transmission mode
PTT lock threshold
PTT hold threshold
Silence below
Current speech detection chance
Speech above
Speech below
Audio per packet
Sain bob paced
Quality of compression (peak bandwidth)
Noise suppression
Maximum amplification
Transmission started sound
Transmission stopped sound
Initiate idle action after (in minutes)
Idle action
Access to the microphone was denied. Please allow Mumble to use the microphone by changing the settings in System Preferences -> Security & Privacy -> Privacy -> Microphone.
Access to the microphone was denied. Please check that your operating system's microphone settings allow Mumble to use the microphone.
Disabled
Disable echo cancellation.
AudioOutput
Interface
Rhyngwyneb
System
System
Output method for audio
Dull allbwn ar gyfer sain
Device
Dyfais
Output device for audio
<b>This is the output device to use for audio.</b>
Positional Audio
Audio Output
Default &Jitter Buffer
Safety margin for jitter buffer
<b>This sets the minimum safety margin for the jitter buffer.</b><br />All incoming audio is buffered, and the jitter buffer continually tries to push the buffer to the minimum sustainable by your network, so latency can be as low as possible. This sets the minimum buffer size to use. If the start of sentences you hear is very jittery, increase this value.
Minimum distance to user before sound volume decreases
This sets the minimum distance for sound calculations. The volume of other users' speech will not decrease until they are at least this far away from you.
This sets the maximum distance for sound calculations. When farther away than this, other users' speech volume will not decrease any further.
<b>This enables one of the loopback test modes.</b><br /><i>None</i> - Loopback disabled<br /><i>Local</i> - Emulate a local server.<br /><i>Server</i> - Request loopback from server.<br />Please note than when loopback is enabled, no other users will hear your voice. This setting is not saved on application exit.
Volume
Volume of incoming speech
<b>This adjusts the volume of incoming speech.</b><br />Note that if you increase this beyond 100%, audio will be distorted.
Output Delay
Amount of data to buffer
The connected "speakers" are actually headphones
The connected "speakers" are actually headphones.
Factor for sound volume decrease
Bloom
Factor for sound volume increase
How much should sound volume increase for sources that are really close?
Checking this indicates that you don't have speakers connected, just headphones. This is important, as speakers are usually in front of you, while headphones are directly to your left/right.
This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn't cause rapid jitter in the sound.
Headphones
Minimum Distance
Maximum Distance
Maximum distance, beyond which speech volume won't decrease
Minimum Volume
What should the volume be at the maximum distance?
Loopback Test
Delay Variance
Variance in packet latency
<b>This sets the packet latency variance for loopback testing.</b><br />Most audio paths contain some variable latency. This allows you to set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.
<b>This sets the packet latency variance for loopback testing.</b><br />Most audio paths contain some variable latency. This allows you set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.
Packet Loss
Packet loss for loopback mode
<b>This sets the packet loss for loopback mode.</b><br />This will be the ratio of packets lost. Unless your outgoing bandwidth is peaked or there's something wrong with your network connection, this will be 0%
&Loopback
Desired loopback mode
Attenuate applications by...
Attenuation of other applications during speech
<b>Attenuate volume of other applications during speech</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This sets the attenuation of other applications if the feature is enabled.
If checked Mumble lowers the volume of other applications while other users talk
<b>Attenuate applications while other users talk</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while other users talk to you.
while other users talk
If checked Mumble lowers the volume of other applications while you talk
<b>Attenuate applications while you talk</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while you talk.
while you talk
Exclusive mode, not recommended.
<b>This opens the device in exclusive mode.</b><br />No other application will be able to use the device.
Exclusive
If checked Mumble lowers the volume of other users while you talk if you have the "Priority Speaker" status.
If checked, Mumble will only attenuate applications that are using the same output source as Mumble
<b>Attenuate only applications using the same output as Mumble</b><br />If checked, applications that use a different output than Mumble will not be attenuated.
Only attenuate applications using the same output device
If checked, PulseAudio loopback modules will be attenuated
<b>Attenuate PulseAudio loopback modules</b><br />If loopback modules are linked to Mumble's output device/sink, they will also be attenuated.
Attenuate PulseAudio loopback modules
Audio output
<b>This is the output method to use for audio.</b>
<b>Attenuate other users while talking as Priority Speaker</b><br />Mumble supports decreasing the volume of other users while you talk as the <i>Priority Speaker</i> to avoid getting disturbed. Checking this checkbox will enable this feature.
Attenuate other users while talking as Priority Speaker
Enable
Attenuation
AudioOutputDialog
None
Dim
Local
Server
Audio Output
%1 ms
%1 me
%1 %
%1 m
Output system
Output device
Default jitter buffer
Volume of incoming speech
Output delay
Attenuation of other applications during speech
Minimum distance
Maximum distance
Minimum volume
Bloom
Delay variance
Packet loss
Loopback
AudioOutputSample
Choose sound file
Invalid sound file
The file '%1' cannot be used by Mumble. Please select a file with a compatible format and encoding.
AudioStats
>1000 ms
>1000ms
Audio Statistics
Input Levels
Peak microphone level
Peak power in last frame
This shows the peak power in the last frame (20 ms), and is the same measurement as you would usually find displayed as "input power". Please disregard this and look at <b>Microphone power</b> instead, which is much more steady and disregards outliers.
Peak speaker level
This shows the peak power of the speakers in the last frame (20 ms). Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you're playing audio from other programs, your setup is not working.
This shows the peak power in the last frame (20 ms) of the speakers. Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you're playing audio from other programs, your setup is not working.
Peak clean level
This shows the peak power in the last frame (20 ms) after all processing. Ideally, this should be -96 dB when you're not talking. In reality, a sound studio should see -60 dB, and you should hopefully see somewhere around -20 dB. When you are talking, this should rise to somewhere between -5 and -10 dB.<br />If you are using echo cancellation, and this rises to more than -15 dB when you're not talking, your setup is not working, and you'll annoy other users with echoes.
Signal Analysis
Microphone power
How close the current input level is to ideal
This shows how close your current input volume is to the ideal. To adjust your microphone level, open whatever program you use to adjust the recording volume, and look at the value here while talking.<br /><b>Talk loud, as you would when you're upset over getting fragged by a noob.</b><br />Adjust the volume until this value is close to 100%, but make sure it doesn't go above. If it does go above, you are likely to get clipping in parts of your speech, which will degrade sound quality.
Signal-To-Noise ratio
Cymhareb Signal-i-Sain
Signal-To-Noise ratio from the microphone
This is the Signal-To-Noise Ratio (SNR) of the microphone in the last frame (20 ms). It shows how much clearer the voice is compared to the noise.<br />If this value is below 1.0, there's more noise than voice in the signal, and so quality is reduced.<br />There is no upper limit to this value, but don't expect to see much above 40-50 without a sound studio.
Speech Probability
Probability of speech
This is the probability that the last frame (20 ms) was speech and not environment noise.<br />Voice activity transmission depends on this being right. The trick with this is that the middle of a sentence is always detected as speech; the problem is the pauses between words and the start of speech. It's hard to distinguish a sigh from a word starting with 'h'.<br />If this is in bold font, it means Mumble is currently transmitting (if you're connected).
Configuration feedback
Current audio bitrate
Bitrate of last frame
DoublePush interval
Time between last two Push-To-Talk presses
Speech Detection
Synhwyro Llais
Current speech detection chance
<b>This shows the current speech detection settings.</b><br />You can change the settings from the Settings dialog or from the Audio Wizard.
Signal and noise power spectrum
Power spectrum of input signal and noise estimate
This shows the power spectrum of the current input signal (red line) and the current noise estimate (filled blue).<br />All amplitudes are multiplied by 30 to show the interesting parts (how much more signal than noise is present in each waveband).<br />This is probably only of interest if you're trying to fine-tune noise conditions on your microphone. Under good conditions, there should be just a tiny flutter of blue at the bottom. If the blue is more than halfway up on the graph, you have a seriously noisy environment.
Echo Analysis
Weights of the echo canceller
This shows the weights of the echo canceller, with time increasing downwards and frequency increasing to the right.<br />Ideally, this should be black, indicating no echo exists at all. More commonly, you'll have one or more horizontal stripes of bluish color representing time delayed echo. You should be able to see the weights updated in real time.<br />Please note that as long as you have nothing to echo off, you won't see much useful data here. Play some music and things should stabilize. <br />You can choose to view the real or imaginary parts of the frequency-domain weights, or alternately the computed modulus and phase. The most useful of these will likely be modulus, which is the amplitude of the echo, and shows you how much of the outgoing signal is being removed at that time step. The other viewing modes are mostly useful to people who want to tune the echo cancellation algorithms.<br />Please note: If the entire image fluctuates massively while in modulus mode, the echo canceller fails to find any correlation whatsoever between the two input sources (speakers and microphone). Either you have a very long delay on the echo, or one of the input sources is configured wrong.
This is the audio bitrate of the last compressed frame (20 ms), and as such will jump up and down as the VBR adjusts the quality. The peak bitrate can be adjusted in the Settings dialog.
AudioWizard
Audio Tuning Wizard
Introduction
Welcome to the Mumble Audio Wizard
Finished
Wedi gorffen
Enjoy using Mumble
Mwynhewch defnyddio Mumble
Device selection
Dewis dyfais
Selecting the input and output device to use with Mumble.
This is the device your microphone is connected to.
System
System
Input method for audio
Dull mewnbwn ar gyfer sain
Device
Dyfais
Input device to use
Dyfais mewnbwn i'w ddefnyddio
<b>Selects which sound card to use for audio input.</b>
Cancel echo from headset or speakers
Use echo cancellation
This enables echo cancellation of outgoing audio, which helps both on speakers and on headsets.
This is the device your speakers or headphones are connected to.
Output method for audio
Dull allbwn ar gyfer sain
Output device to use
Dyfais allbwn i'w ddefnyddio
<b>Selects which sound card to use for audio Output.</b>
Enable positional audio
Allows positioning of sound
Allows positioning of sound.
Input Device
Dyfais mewnbwn
Output Device
Dyfais allbwn
This allows Mumble to use positional audio to place voices.
<p>
To keep latency to an absolute minimum, it's important to buffer as little audio as possible on the soundcard. However, many soundcards report that they require a much smaller buffer than what they can actually work with, so the only way to set this value is to try and fail.
</p>
<p>
You should hear a voice sample. Change the slider below to the lowest value which gives <b>no</b> interruptions or jitter in the sound. Please note that local echo is disabled during this test.
</p>
Amount of data to buffer
This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn't cause rapid jitter in the sound.
<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the blue and green but <b>not</b> the red zone while you speak.
</p>
Positional Audio
Adjusting attenuation of positional audio.
Use headphones instead of speakers
Defnyddio clustffonau yn lle seinyddion
<p>
Congratulations. You should now be ready to enjoy a richer sound experience with Mumble.
</p>
<p>
Mumble is under continuous development, and the development team wants to focus on the features that benefit the most users. To this end, Mumble supports submitting anonymous statistics about your configuration to the developers. These statistics are essential for future development, and also make sure the features you use aren't deprecated.
</p>
Use headphones
Defnyddio clustffonau
This ignores the OS speaker configuration and configures the positioning for headphones instead.
Volume tuning
Tuning microphone hardware volume to optimal settings.
Now talk softly, as you would when talking late at night and you don't want to disturb anyone. Adjust the slider below so that the bar moves into green when you talk, but stays blue while you're silent.
Voice Activity Detection
Letting Mumble figure out when you're talking and when you're silent.
This will help Mumble figure out when you are talking. The first step is selecting which data value to use.
Raw amplitude from input
Signal-To-Noise ratio
Cymhareb Signal-i-Sain
Next you need to adjust the following slider. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you're not talking, everything should be in the red (definitively not speech).
Next you need to adjust the following two sliders. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you're not talking, everything should be in the red (definitively not speech).
Device tuning
Changing hardware output delays to their minimum value.
Submit anonymous statistics to the Mumble project
Push To Talk:
Gwthio I Siarad:
Quality & Notifications
Ansawdd & Hysbysiadau
Adjust quality and notification settings.
Newid dewisiadau ansawdd a hysbysiadau.
Quality settings
Dewisiadau ansawdd
Low
Isel
Balanced
Cytbwys
Notification settings
Dewisiadau hysbysiadau
Use Text-To-Speech to read notifications and messages to you.
Disable Text-To-Speech and use sounds instead.
%1 ms
%1 me
Enables attenuation of other applications while users talk to you
Attenuate applications while other users talk
High
Uchel
Custom
You already set a customized quality configuration in Mumble. Select this setting to keep it.
Enables attenuation of other applications while users talk to you. This means that as soon someone starts to speak to you in Mumble, the sound of all other applications (like audio players) will get attenuated so you can hear them more clearly.
Apply some high contrast optimizations for visually impaired users
Use high contrast graphics
Keep custom Text-To-Speech settings.
<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but <b>not</b> the crisscrossed zone while you speak.
</p>
<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but <b>not</b> the criss-crossed zone while you speak.
</p>
For high contrast mode
Now talk softly, as you would when talking late at night and you don't want to disturb anyone. Adjust the slider below so that the bar moves into empty zone when you talk, but stays in the striped one while you're silent.
For high contrast mode
Next you need to adjust the following slider. The first few utterances you say should end up in the empty area (definitive speech). While talking, you should stay inside the striped (might be speech) and when you're not talking, everything should be in the crisscrossed (definitively not speech).
For high contrast mode
In this configuration Mumble will use a <b>low amount of bandwidth</b>. This will inevitably result in high latency and poor quality. Choose this only if your connection cannot handle the other settings. (16kbit/s, 60ms per packet)
This is the <b>recommended default</b> configuration. It provides a good balance between quality, latency, and bandwidth usage. (40kbit/s, 20ms per packet)
This configuration is only recommended for use in setups where bandwidth is not an issue, like a LAN. It provides the lowest latency supported by Mumble and <b>high quality</b>. (72kbit/s, 10ms per packet)
<b>This is the input method to use for audio.</b>
<b>This is the Output method to use for audio.</b>
<html><head/><body><p>This is the audio tuning wizard for Mumble. This will help you correctly set the input levels of your sound card, and also set the correct parameters for sound processing in Mumble. </p><p>Please be aware that as long as this wizard is active, audio will be looped locally to allow you to listen to it, and no audio will be sent to the server. </p><p>Note that you can cancel this wizard at any time without it having an effect on your current audio systems. The settings are only once this wizard has been completed.</p></body></html>
<html><head/><body><p>Mumble supports positional audio for some games, and will position the voice of other users relative to their position in game. Depending on their position, the volume of the voice will be changed between the speakers to simulate the direction and distance the other user is at. Such positioning depends on your speaker configuration being correct in your operating system, so a test is done here. </p><p>The graph below shows the position of <span style=" color:#56b4e9;">you</span>, the <span style=" color:#d55e00;">speakers</span> and a <span style=" color:#009e73;">moving sound source</span> as if seen from above. You should hear the audio move between the channels. </p><p>You can also use your mouse to position the <span style=" color:#009e73;">sound source</span> manually.</p></body></html>
Input system
Input device
Output system
Output device
Output delay
Maximum amplification
VAD level
PTT shortcut
No buttons assigned
BanEditor
Mumble - Edit Bans
&Address
&Cyfeiriad
&Mask
&Cuddio
Reason
Rheswm
Start
Cychwyn
End
Gorffen
User
Defnyddiwr
Hash
&Add
&Ychwanegu
&Update
&Diweddaru
&Remove
&Tynnu
Ban List
Search field
This is the search field. Use it to find bans that have this username set in the username field.
Who are you looking for?
Beth rydach yn chwilio amdano?
No nickname
IP address
Cyfeiriad IP
No IP address
Dim cyfeiriad IP
Reason for the ban
No reason
Dim rheswm
Ban end date
Ban end date. If you set the same date for start and end, the ban will be permanent (it will not expire).
Certificate hash
No certificate hash
Banned users
This is a list with banned users.
Use this button if you want to add a new ban.
Use this button if you want to update ban information.
Use this button if you want to remove user from the ban list.
Clear all fields
This button clears all fields. Use it if you want to add a new ban.
Clear
Clirio
Ban List - %n Ban(s)
Search
IP Address
Cyfeiriad IP
Mask
Start date/time
End date/time
CertView
Name
Enw
Email
Ebost
Issuer
Expiry Date
(none)
(dim)
Self-signed
CertWizard
Unable to validate email.<br />Enter a valid (or blank) email to continue.
There was an error generating your certificate.<br />Please try again.
Your certificate and key could not be exported to PKCS#12 format. There might be an error in your certificate.
The file could not be opened for writing. Please use another file.
The file's permissions could not be set. No certificate and key has been written. Please use another file.
The file could not be written successfully. Please use another file.
The file could not be opened for reading. Please use another file.
The file is empty or could not be read. Please use another file.
The file did not contain a valid certificate and key. Please use another file.
Select file to export certificate to
Select file to import certificate from
Unable to import. Missing password or incompatible file type.
<b>Certificate Expiry:</b> Your certificate is about to expire. You need to renew it, or you will no longer be able to connect to servers you are registered on.
Current certificate
Certificate file to import
Certificate password
Certificate to import
New certificate
File to export certificate to
Email address
Your name
Certificates
Certificate Management
Certificate Authentication
Authenticating to servers without using passwords
Current certificate
This is the certificate Mumble currently uses.
Current Certificate
Create a new certificate
This will create a new certificate.
Import certificate from file
This will import a certificate from file.
Import a certificate
Export Certificate
This will export a certificate to file.
Export current certificate
Import Certificate
PKCS #12 Certificate import
<p>Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from Firefox, Internet Explorer, Opera etc.</p><p>If the file is password protected, you will need the password to import the certificate.</p>
<p>Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from FireFox, Internet Explorer, Opera etc.</p><p>If the file is password protected, you will need the password to import the certificate.</p>
Import from
Filename to import from
This is the filename you wish to import a certificate from.
Select file to import from
This opens a file selection dialog to choose a file to import a certificate from.
Open...
Agor...
Password
Cyfrinair
Password for PKCS#12 file
Cyfrinair ar gyfer y ffeil PKCS#12
This is the password for the PKCS#12 file containing your certificate.
Certificate to import
This is the certificate you are importing.
Certificate Details
Replace Certificate
Replace existing certificate with new certificate?
<p>You already have a certificate stored in Mumble, and you are about to replace it.</p>
<p>If you are upgrading to a certificate issued to you by a trusted CA and the email addresses match your current certificate, this is completely safe, and servers you connect to will automatically recognize the strong certificate for your email address.
</p>
<p>If this is not the case, you will no longer be recognized by any server you previously have authenticated with. If you haven't been registered on any server yet, this is nothing to worry about.
</p>
<p>
Are you sure you wish to replace your certificate?
</p>
This is the certificate Mumble currently uses. It will be replaced.
New certificate
This is the new certificate that will replace the old one.
New Certificate
Tystysgrif Newydd
Make a backup of your certificate
Export to
Filename to export to
This is the filename you wish to export a certificate to.
Save As...
Cadw Fel...
This is the certificate Mumble currently uses. It will be exported.
Generate a new certificate for strong authentication
<p>Mumble will now generate a strong certificate for authentication to servers.</p><p>If you wish, you may provide some additional information to be stored in the certificate, which will be presented to servers when you connect. If you provide a valid email address, you can upgrade to a CA issued email certificate later on, which provides strong identification.</p>
Name
Enw
Email
E-bost
Your email address (e.g. johndoe@mumble.info)
Eich cyfeiriad e-bost (e.e. johndoe@mumble.info)
This is your email address. It is strongly recommended to provide a valid email address, as this will allow you to upgrade to a strong certificate without authentication problems.
Your name (e.g. John Doe)
Eich enw (e.e. John Doe)
This is your name, and will be filled out in the certificate. This field is entirely optional.
Finish
Gorffen
Certificate-based authentication is ready for use
Enjoy using Mumble with strong authentication.
Automatic certificate creation
<p>If you ever lose your current certificate, which will happen if your computer suffers a hardware failure or you reinstall your machine, you will no longer be able to authenticate to any server you are registered on. It is therefore <b>mandatory</b> that you make a backup of your certificate. We strongly recommend you store this backup on removable storage, such as a USB flash drive.</p>
<p>Note that this file will not be encrypted, and if anyone gains access to it, they will be able to impersonate you, so take good care of it.</p>
<p>Mumble can use certificates to authenticate with servers. Using certificates avoids passwords, meaning you don't need to disclose any password to the remote site. It also enables very easy user registration and a client side friends list independent of servers.</p><p>While Mumble can work without certificates, the majority of servers will expect you to have one.</p><p>Creating a new certificate automatically is sufficient for most use cases. But Mumble also supports certificates representing trust in the users ownership of an email address. These certificates are issued by third parties. For more information see our <a href="http://mumble.info/certificate.php">user certificate documentation</a>. </p>
ChanACL
None
Dim
Traverse
Enter
Speak
Mute/Deafen
Make channel
Creu sianel
Make temporary
Link channel
This represents no privileges.
This represents total access to the channel, including the ability to change group and ACL information. This privilege implies all other privileges.
This represents the permission to traverse the channel. If a user is denied this privilege, he will be unable to access this channel and any sub-channels in any way, regardless of other permissions in the sub-channels.
This represents the permission to join the channel. If you have a hierarchical channel structure, you might want to give everyone Traverse, but restrict Enter in the root of your hierarchy.
This represents the permission to speak in a channel. Users without this privilege will be suppressed by the server (seen as muted), and will be unable to speak until they are unmuted by someone with the appropriate privileges.
This represents the permission to whisper to this channel from the outside. This works exactly like the <i>speak</i> privilege, but applies to packets spoken with the Whisper key held down. This may be used to broadcast to a hierarchy of channels without linking.
This represents the permission to mute and deafen other users. Once muted, a user will stay muted until he is unmuted by another privileged user or reconnects to the server.
This represents the permission to move a user to another channel or kick him from the server. To actually move the user, either the moving user must have Move privileges in the destination channel, or the user must normally be allowed to enter the channel. Users with this privilege can move users into channels the target user normally wouldn't have permission to enter.
This represents the permission to make sub-channels. The user making the sub-channel will be added to the admin group of the sub-channel.
This represents the permission to make a temporary subchannel. The user making the sub-channel will be added to the admin group of the sub-channel. Temporary channels are not stored and disappear when the last user leaves.
This represents the permission to link channels. Users in linked channels hear each other, as long as the speaking user has the <i>speak</i> privilege in the channel of the listener. You need the link privilege in both channels to create a link, but just in either channel to remove it.
This represents the permission to write text messages to other users in this channel.
This represents the permission to forcibly remove users from the server.
This represents the permission to permanently remove users from the server.
This represents the permission to register and unregister users on the server.
This represents the permission to register oneself on the server.
Whisper
Move
Symud
Text message
Kick
Ban
Register User
Register Self
Write ACL
This represents the permission to use the listen-feature allowing to listen to a channel without being in it.
Listen
This represents the permission to reset the comment or avatar of a user.
Reset User Content
ChatbarTextEdit
Paste and &Send
Paste and send
<center>Type chat message here</center>
Unable to send image: too large.
Unable to send image %1: too large.
This server does not allow sending images.
ClientUser
Friend
Ffrind
Authenticated
Priority speaker
Recording
Muted (server)
Deafened (server)
Local Ignore (Text messages)
Local Mute
Muted (self)
Deafened (self)
Local Ignore (Text-To-Speech)
ConfigDialog
Accept changes
This button will accept current settings and return to the application.<br />The settings will be stored to disk when you leave the application.
Reject changes
This button will reject all changes and return to the application.<br />The settings will be reset to the previous positions.
Apply changes
This button will immediately apply all changes.
Undo changes for current page
This button will revert any changes done on the current page to the most recent applied settings.
Restore defaults for current page
Mumble Configuration
Configuration categories
This button will restore the defaults for the settings on the current page. Other pages will not be changed.<br />To restore all settings to their defaults, you can press the "Defaults (All)" button.
Restore all defaults
This button will restore the defaults for all settings.
Defaults (All)
ConnectDialog
Connecting to %1
Cysylltu i %1
Enter username
Servername
Unknown
Users
Defnyddwyr
Failed to fetch server list
Mumble Server Connect
Ping
Remove from Favorites
Tynnu o Ffefrynau
Add custom server
&Copy
&Copio
Copy favorite link to clipboard
&Paste
&Gludo
Paste favorite from clipboard
&Edit...
&Add New...
Add to &Favorites
Open &Webpage
Server list
Search
Location
Filter
Show All
Show Populated
Show Reachable
All
Africa
Asia
Europe
North America
Oceania
South America
Consent to the transmission of private data
<p>To measure the latency (ping) of public servers and determine the number of active users, your IP address must be transmitted to each public server.</p><p>Do you consent to the transmission of your IP address? If you answer no, the public server list will be deactivated. However, you can reactivate it at any time in the network settings.</p>
C&onnect
Adding host %1
Hostname
Bonjour name
Port
Porth
Addresses
Cyfeiriad
Website
Gwefan
Packet loss
Ping (80%)
%1 ms
%1 me
Ping (95%)
Bandwidth
Lled Band
%1 kbit/s
%1 kbit/s
Version
Fersiwn
ConnectDialogEdit
Edit Server
Name of the server
Enw'r gweinydd
A&ddress
Internet address of the server.
Internet address of the server.
<b>Address</b><br/>
Internet address of the server. This can be a normal hostname, an IPv4/IPv6 address or a Bonjour service identifier. Bonjour service identifiers have to be prefixed with a '@' to be recognized by Mumble.
<b>Address</b></br>
Internet address of the server. This can be a normal hostname, an ipv4/6 address or a bonjour service identifier. Bonjour service identifiers have to be prefixed with a '@' to be recognized by Mumble.
&Port
Port on which the server is listening
<b>Port</b><br/>
Port on which the server is listening. If the server is identified by a Bonjour service identifier this field will be ignored.
&Username
Username to send to the server
<b>Username</b><br/>
Username to send to the server. Be aware that the server can impose restrictions on how a username might look like. Also your username could already be taken by another user.
Label
Label
Add Server
Ychwanegu Gweinydd
You are currently connected to a server.
Do you want to fill the dialog with the connection data of this server?
Host: %1 Port: %2
You have an URL in your clipboard.
Do you want to fill the dialog with this data?
Host: %1 Port: %2
Password
Cyfrinair
Password to send to the server
<b>Password</b><br/>
Password to be sent to the server on connect. This password is needed when connecting as <i>SuperUser</i> or to a server using password authentication. If not entered here the password will be queried on connect.
Show password
Dangos cyfrinair
<b>Label</b><br/>
Label of the server. This is what the server will be named like in your server list and can be chosen freely.
Local server label
127.0.0.1
127.0.0.1
64738
64738
Your username
Your password
&Fill
&Ignore
CrashReporter
Mumble Crash Report
<p><b>We're terribly sorry, but it seems Mumble has crashed. Do you want to send a crash report to the Mumble developers?</b></p><p>The crash report contains a partial copy of Mumble's memory at the time it crashed, and will help the developers fix the problem.</p>
Email address (optional)
Please describe briefly, in English, what you were doing at the time of the crash
Please briefly describe what you were doing at the time of the crash
Send Report
Don't send report
Crash upload successful
Thank you for helping make Mumble better!
Crash upload failed
Uploading crash report
Abort upload
HTTP error %1: "%2"
Internal error encountered in CrashReporter.cpp: Received network reply does not contain an HTTP status code. Please inform a developer about error code %1
Database
The database '%1' is read-only. Mumble cannot store server settings (i.e. SSL certificates) until you fix this problem.
The database '%1' is read-only. Mumble can not store server settings (ie. SSL certificates) until you fix this problem.
The database file '%1' set in the configuration file does not exist. Do you want to create a new database file at this location?
Mumble failed to initialize a database in any of the possible locations.
DeveloperConsole
Developer Console
DockTitleBar
Drag here
GlobalShortcut
Shortcuts
List of configured shortcuts
Function
Data
Shortcut
Suppress
Add new shortcut
This will add a new global shortcut
&Add
&Ychwanegu
Remove selected shortcut
This will permanently remove a selected shortcut.
&Remove
<html><head/><body><p>Mumble can currently only use mouse buttons and keyboard modifier keys (Alt, Ctrl, Cmd, etc.) for global shortcuts.</p><p>If you want more flexibility, you can enable <span style=" font-style:italic;">Access for assistive devices</span> in the system's Accessibility preferences. However, please note that this change also potentially allows malicious programs to read what is typed on your keyboard.</p></body></html>
Open Accessibility Preferences
Skip
Enable Global Shortcuts
<b>Additional Shortcut Engines</b><br />This section allows you to configure the use of additional GlobalShortcut engines.
Additional Shortcut Engines
<b>Enable Windows hooks</b>.<br />This enables the Windows hooks shortcut engine. Using this engine allows Mumble to suppress keypresses and mouse clicks.
Enable Windows hooks
<b>Enable GKey</b>.<br />This setting enables support for the GKey shortcut engine, for "G"-keys found on Logitech keyboards.
Enable GKey
<b>Enable XInput</b><br />This setting enables support for the XInput shortcut engine, for Xbox compatible controllers.
Enable XInput
<b>Enable shortcuts in privileged applications</b>.<br />Also known as "UIAccess". This allows Mumble to receive global shortcut events from programs running at high privilege levels, such as an Admin Command Prompt or older games that run with admin privileges.
<br /><br />
Without this option enabled, using Mumble's global shortcuts in privileged applications will not work. This can seem inconsistent: for example, if the Push-to-Talk button is pressed in a non-privileged program, but released in a privileged application, Mumble will not observe that it has been released and you will continue to talk until you press the Push-to-Talk button again.
Enable shortcuts in privileged applications
GlobalShortcutButtons
Edit shortcut
Start capture process
<html><head/><body><p>Starts the capture process: all buttons you press will be added to the tree.</p><p>Once all buttons are released, the capture process stops automatically.</p></body></html>
Add
Ychwanegu
Remove the currently selected items
Remove
GlobalShortcutConfig
<html><head/><body><p>Mumble can currently only use mouse buttons and keyboard modifier keys (Alt, Ctrl, Cmd, etc.) for global shortcuts.</p><p>If you want more flexibility, you can add Mumble as a trusted accessibility program in the Security & Privacy section of your Mac's System Preferences.</p><p>In the Security & Privacy preference pane, change to the Privacy tab. Then choose Accessibility (near the bottom) in the list to the left. Finally, add Mumble to the list of trusted accessibility programs.</body></html>
Shortcuts
<b>This is the global shortcut key combination.</b><br />Click this field and then press the desired key/button combo to rebind. Double-click to clear.
<b>This is the global shortcut key combination.</b><br />Double-click this field and then the desired key/button combo to rebind.
Suppress keys from other applications
<b>This hides the button presses from other applications.</b><br />Enabling this will hide the button (or the last button of a multi-button combo) from other applications. Note that not all buttons can be suppressed.
Configured shortcuts
GlobalShortcutEngine
Unknown
GlobalShortcutMac
Mouse
Keyboard
GlobalShortcutTarget
Whisper Target
Channel Target
Restrict to Group
If specified, only members of this group will receive the whisper.
List of users
Add
Ychwanegu
Remove
Modifiers
Do not send positional audio information when using this whisper shortcut.
Ignore positional audio
Shout to Linked channels
Shout to subchannels
The whisper will also be transmitted to linked channels.
The whisper will also be sent to the subchannels of the channel target.
Shout/Whisper to:
Current selection
When shouting to channel:
Shout to linked channels
Channel
Sianel
GlobalShortcutWin
Mouse
Keyboard
GlobalShortcutX
Keyboard
Mouse
JackAudioSystem
Hardware Ports
Mono
Stereo
LCD
Not connected
LCDConfig
Enable this device
LCD
Devices
Name
Enw
<p>This is the list of available LCD devices on your system. It lists devices by name, but also includes the size of the display. Mumble supports outputting to several LCD devices at a time.</p>
<h3>Size:</h3>
<p>
This field describes the size of an LCD device. The size is given either in pixels (for Graphic LCDs) or in characters (for Character LCDs).</p>
<h3>Enabled:</h3>
<p>This decides whether Mumble should draw to a particular LCD device.</p>
Size
Enabled
Wedi'i alluogi
Views
Minimum Column Width
<p>This option decides the minimum width a column in the User View.</p>
<p>If too many people are speaking at once, the User View will split itself into columns. You can use this option to pick a compromise between number of users shown on the LCD, and width of user names.</p>
This setting decides the width of column splitter.
Splitter Width
Minimum column width
Splitter width
ListenerLocalVolumeDialog
Adjusting local volume for listening to %1
Log
Debug
Critical
Warning
Information
Other self-muted/deafened
User recording state changed
User kicked (you or by you)
User kicked
You self-muted
User muted (you)
User muted (by you)
User muted (other)
You self-unmuted
You self-deafened
You self-undeafened
User renamed
User connected and entered channel
User left channel and disconnected
Private text message
the server
[[ Invalid size ]]
[[ Text object too large to display ]]
[Date changed to %1]
link to %1
FTP link to %1
player link
channel link
%1 link
Server connected
Server disconnected
User joined server
User left server
User joined channel
User left channel
Permission denied
Text message
You joined channel
You joined channel (moved)
User started listening to channel
User stopped listening to channel
Plugin message
LogConfig
Toggle console for %1 events
Toggle pop-up notifications for %1 events
Toggle Text-To-Speech for %1 events
Click here to toggle sound notification for %1 events
Toggle window highlight (if not active) for %1 events
Path to sound file used for sound notifications in the case of %1 events<br />Single click to play<br />Double-click to change
Click here to toggle console output for %1 events.<br />If checked, this option makes Mumble output all %1 events in its message log.
Click here to toggle pop-up notifications for %1 events.<br />If checked, a notification pop-up will be created by Mumble for every %1 event.
Click here to toggle pop-up notifications for %1 events.<br />If checked, a notification pop-up will be created by mumble for every %1 event.
Click here to toggle window highlight for %1 events.<br />If checked, Mumble's window will be highlighted for every %1 event, if not active.
Path to sound file used for sound notifications in the case of %1 events.<br />Single click to play<br />Double-click to change<br />Ensure that sound notifications for these events are enabled or this field will not have any effect.
Click here to toggle Text-To-Speech for %1 events.<br />If checked, Mumble uses Text-To-Speech to read %1 events out loud to you. Text-To-Speech is also able to read the contents of the event which is not true for sound files. Text-To-Speech and sound files cannot be used at the same time.
Click here to toggle sound notification for %1 events.<br />If checked, Mumble uses a soundfile predefined by you to indicate %1 events. Soundfiles and Text-To-Speech cannot be used at the same time.
Click here to toggle sound notification for %1 events.<br />If checked, Mumble uses a sound file predefined by you to indicate %1 events. Sound files and Text-To-Speech cannot be used at the same time.
Path to soundfile used for sound notifications in the case of %1 events.<br />Single click to play<br />Doubleclick to change<br />Be sure that sound notifications for these events are enabled or this field will not have any effect.
Messages
Message
Console
Notification
Text-To-Speech
Soundfile
Path
Text To Speech
Volume
Volume of Text-To-Speech Engine
<b>This is the volume used for the speech synthesis.</b>
Length threshold
Message length threshold for Text-To-Speech Engine
<b>This is the length threshold used for the Text-To-Speech Engine.</b><br />Messages longer than this limit will not be read aloud in their full length.
Characters
Whisper
If checked you will only hear whispers from users you added to your friend list.
Only accept whispers from friends
If enabled text messages you send will be read back to you with TTS
Read back own messages
Chat Log
Maximum chat length
Unlimited
Lines
Highlight
If enabled, TTS will not dictate the message scope.
Omit Message Scope
If enabled, TTS will not dictate the message author.
Omit Message Author
If checked the time at the beginning of a message will be displayed in the 24-hour format.
The setting only applies for new messages, the already shown ones will retain the previous time format.
Use 24-hour clock
How far individual messages are spaced out from one another.
Message margins
Log messages
TTS engine volume
Chat message margins
LookConfig
System default
None
Dim
Only with users
All
Ask
Do Nothing
Move
Symud
<a href="%1">Browse</a>
This link is located next to the theme heading in the ui config and opens the user theme directory
User Interface
This sets which channels to automatically expand. <i>None</i> and <i>All</i> will expand no or all channels, while <i>Only with users</i> will expand and collapse channels as users join and leave them.
List users above subchannels (requires restart).
<b>If set, users will be shown above subchannels in the channel view.</b><br />A restart of Mumble is required to see the change.
Users above Channels
<b>If set, will verify you want to quit if connected.</b>
Show number of users in each channel
Show channel user count
Language
Language to use (requires restart)
<b>This sets which language Mumble should use.</b><br />You have to restart Mumble to use the new language.
Look and Feel
Layout
Classic
Stacked
Hybrid
Custom
This changes the behavior when moving channels.
This sets the behavior of channel drags; it can be used to prevent accidental dragging. <i>Move</i> moves the channel without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the channel.
This sets the behavior of channel drags; it can be used to prevent accidental dragging. <i>Move Channel</i> moves the channel without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the channel.
Expand
When to automatically expand channels
Channel Dragging
Ask whether to close or minimize when quitting Mumble.
Ask on quit while connected
Always On Top
<b>If set, minimizing the Mumble main window will cause it to be hidden and accessible only from the tray. Otherwise, it will be minimized as a window normally would.</b>
Hide in tray when minimized
Hide the main Mumble window in the tray when it is minimized.
This setting controls when the application will be always on top.
Never
Byth
Always
In minimal view
In normal view
Displays talking status in system tray
Show talking status in tray icon
This setting controls in which situations the application will stay always on top. If you select <i>Never</i> the application will not stay on top. <i>Always</i> will always keep the application on top. <i>In minimal view</i> / <i>In normal view</i> will only keep the application always on top when minimal view is activated / deactivated.
Show context menu in menu bar
Apply some high contrast optimizations for visually impaired users
Optimize for high contrast
Application
Adds user and channel context menus into the menu bar
Tray Icon
Channel Tree
Use selected item as the chat bar target
Filter automatically hides empty channels
Show transmit mode dropdown in toolbar
Theme
Theme to use to style the user interface
<b>Configures which theme the Mumble user interface should be styled with</b><br />Mumble will pick up themes from certain directories and display them in this list. The one you select will be used to customize the visual appearance of Mumble. This includes colors, icons and more.
User Dragging
This changes the behavior when moving users.
This sets the behavior of user drags; it can be used to prevent accidental dragging. <i>Move</i> moves the user without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the user.
<b>Enable Developer menu</b><br />This enables the "Developer"-menu in Mumble. This menu is used for developer-specific features, such as the Developer Console.
Enable Developer menu
When in custom layout mode, checking this disables rearranging.
Lock layout
Talking UI
A user that is silent for the given amount of seconds will be removed from the Talkin UI.
Remove silent user after
If this is checked, the local user (yourself) will always be visible in the TalkingUI (regardless of talking state).
Always keep local user visible
How many characters from the original name to display at the beginning of an abbreviated name.
String to separate a channel name from its parent's.
Channel separator
Abbreviated prefix characters
The names of how many parent channels should be included in the channel's name when displaying it in the TalkingUI?
How many characters from the original name to display at the end of an abbreviated name.
Abbreviated postfix characters
Whether to also allow abbreviating the current channel of a user (instead of only its parent channels).
Abbreviate current channel name
Channel hierarchy depth
Abbreviation replacement
Whether the channel (hierarchy) name should be abbreviated, if it exceeds the specified maximum length.
Abbreviate channel names
The preferred maximum length of a channel (hierarchy) name in the Talking UI. Note that this is not a hard limit though.
Max. channel name length
Relative font size to use in the Talking UI in percent.
Rel. font size (%)
String that gets used instead of the cut-out part of an abbreviated name.
Prefix character count
Postfix character count
Maximum name length
Relative font size
Always on top
Channel dragging
Automatically expand channels when
User dragging behavior
Silent user lifetime
Show the local volume adjustment for each user (if any).
Show volume adjustments
Whether to show all of the local user's listeners (ears) in the TalkingUI (and thereby also the channels they are in).
Show local user's listeners (ears)
Hide the username for each user if they have a nickname.
Show nicknames only
MainWindow
Root
Tardd
Push-to-Talk
Global Shortcut
Push and hold this button to send voice.
Global Shortcut
This configures the push-to-talk button, and as long as you hold this button down, you will transmit voice.
Global Shortcut
Reset Audio Processor
Global Shortcut
Unlink Plugin
Global Shortcut
Push-to-Mute
Global Shortcut
Join Channel
Global Shortcut
Toggle Overlay
Global Shortcut
Toggle state of in-game overlay.
Global Shortcut
Toggle Minimal
Global Shortcut
Volume Up (+10%)
Global Shortcut
Volume Down (-10%)
Global Shortcut
Mumble
Mumble -- %1
&Window
Minimize
Ctrl+M
Close
Mumble is currently connected to a server. Do you want to Close or Minimize it?
Mute Self
Global Shortcut
Set self-mute status.
Global Shortcut
This will set or toggle your muted status. If you turn this off, you will also disable self-deafen.
Global Shortcut
Deafen Self
Global Shortcut
Set self-deafen status.
Global Shortcut
This will set or toggle your deafened status. If you turn this on, you will also enable self-mute.
Global Shortcut
Whisper/Shout
Whisper
<center>Not connected</center>
Not connected
Clear
Clirio
Opening URL %1
File does not exist
File is not a configuration file.
Settings merged from file.
URL scheme is not 'mumble'
This version of Mumble can't handle URLs for Mumble version %1.%2.%3
Connecting to %1
Cysylltu i %1
Enter username
Connecting to server %1.
Reconnecting.
Transmit Mode set to Continuous
Register yourself as %1
<p>You are about to register yourself on this server. This action cannot be undone, and your username cannot be changed once this is done. You will forever be known as '%1' on this server.</p><p>Are you sure you want to register yourself?</p>
Register user %1
<p>You are about to register %1 on the server. This action cannot be undone, the username cannot be changed, and as a registered user, %1 will have access to the server even if you change the server password.</p><p>From this point on, %1 will be authenticated with the certificate currently in use.</p><p>Are you sure you want to register %1?</p>
Kicking user %1
Banning user %1
View comment on user %1
Message to channel %1
Connected.
<li>Expected certificate digest (SHA-1): %1</li>
Server presented a certificate which failed verification.
<p>%1</p><ul>%2</ul><p>The specific errors with this certificate are:</p><ol>%3</ol><p>Do you wish to accept this certificate anyway?<br />(It will also be stored so you won't be asked this again.)</p>
SSL Version mismatch
Server connection failed.
<center>Type message to channel '%1' here</center>
Type message to channel '%1' here
<center>Type message to user '%1' here</center>
Type message to user '%1' here
Choose image file
Failed to load image
Methodd llwytho'r delwedd
Could not open file for reading.
Image format not recognized.
&User
&Channel
Use in conjunction with Whisper to.
Global Shortcut
This will switch the states of the in-game overlay.
Global Shortcut
Link Channel
Global Shortcut
Cycle Transmit Mode
Global Shortcut
Set Transmit Mode to Push-To-Talk
Global Shortcut
Set Transmit Mode to Continuous
Global Shortcut
Set Transmit Mode to VAD
Global Shortcut
Send Text Message
Global Shortcut
Send Clipboard Text Message
Global Shortcut
This will send your Clipboard content to the channel you are currently in.
Global Shortcut
Continuous
Voice Activity
Push-to-Talk
Mumble - Minimal View -- %1
Cancel
Save Image As...
Save Image File
Could not save image: %1
Change your comment
Transmit Mode set to Voice Activity
Transmit Mode set to Push-to-Talk
&View Certificate
Enter reason
Sending message to %1
To %1: %2
Message to %1
Are you sure you want to reset the comment of user %1?
Are you sure you want to reset the avatar of user %1?
Are you sure you want to delete %1 and all its sub-channels?
Sending message to channel %1
Message to tree %1
To %1 (Tree): %2
(Tree) %1: %2
Unmuted and undeafened.
Unmuted.
Muted.
Muted and deafened.
Deafened.
Undeafened.
Restart Mumble?
Some settings will only apply after a restart of Mumble. Restart Mumble now?
About Qt
SSL Verification failed: %1
<li>Server certificate digest (SHA-1): %1</li>
<b>WARNING:</b> The server presented a certificate that was different from the stored one.
This server is using an older encryption standard, and is no longer supported by modern versions of Mumble.
Server connection failed: %1.
Disconnected from server.
Invalid username
You connected with an invalid username, please try another one.
Username in use
That username is already in use, please try another username.
Wrong certificate or password
Wrong certificate or password for registered user. If you are
certain this user is protected by a password please retry.
Otherwise abort and check your certificate and username.
Wrong password
Wrong server password for unregistered user account, please try again.
Images (*.png *.jpg *.jpeg)
C&onfigure
&Help
Log
This shows all recent activity. Connecting to servers, errors and information messages all show up here.<br />To configure exactly which messages show up here, use the <b>Settings</b> command from the menu.
&Quit Mumble
Closes the program
Exits the application.
Ctrl+Q
Open the server connection dialog
&Disconnect
Disconnect from server
Disconnects you from the server.
Show information about the server connection
This will show extended information about the connection to the server.
&Mute
&Deafen
&Local Mute
Send a Text Message
Sends a text message to another user.
Add new channel
This adds a new sub-channel to the currently selected channel.
Remove channel
This removes a channel and all sub-channels.
Edit Groups and ACL for channel
This opens the Group and ACL dialog for the channel, to control permissions.
&Link
Link your channel to another channel
This is the chatbar<br />If you enter text here and then press enter the text is sent to the user or channel that was selected. If nothing is selected the message is sent to your current channel.
Chatbar
Shows a dialog of registered servers, and also allows quick-connect.
Kick user (with reason)
Kick selected user off server. You'll be asked to specify a reason.
Mute user
Mute or unmute user on server. Unmuting a deafened user will also undeafen them.
Kick and ban user (with reason)
Kick and ban selected user from server. You'll be asked to specify a reason.
Deafen user
Deafen or undeafen user on server. Deafening a user will also mute them.
Mute user locally
Mute or unmute user locally. Use this on other users in the same room.
This links your current channel to the selected channel. If users in a channel have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.
This links your current channel to the selected channel. If they have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.
&Unlink
Channel
Unlink your channel from another channel
This unlinks your current channel from the selected channel.
Unlinks your channel from all linked channels.
This unlinks your current channel (not the selected one) from all linked channels.
&Reset
Reset audio preprocessor
This will reset the audio preprocessor, including noise cancellation, automatic gain and voice activity detection. If something suddenly worsens the audio environment (like dropping the microphone) and it was temporary, use this to avoid having to wait for the preprocessor to readjust.
&Mute Self
Mute yourself
Mute or unmute yourself. When muted, you will not send any data to the server. Unmuting while deafened will also undeafen.
&Deafen Self
Deafen yourself
Deafen or undeafen yourself. When deafened, you will not hear anything. Deafening yourself will also mute.
&Text-To-Speech
Toggle Text-To-Speech
Enable or disable the text-to-speech engine. Only messages enabled for TTS in the Configuration dialog will actually be spoken.
Display audio statistics
Pops up a small dialog with information about your current audio input.
Forcibly unlink plugin
This forces the current plugin to unlink, which is handy if it is reading completely wrong data.
Configure Mumble
Allows you to change most settings for Mumble.
Start the audio configuration wizard
This will guide you through the process of configuring your audio hardware.
&What's This?
Enter What's This? mode
Click this to enter "What's This?" mode. Your cursor will turn into a question mark. Click on any button, menu choice or area to show a description of what it is.
Information about Mumble
Shows a small dialog with information and license for Mumble.
Information about Speex
Shows a small dialog with information about Speex.
Information about Qt
Shows a small dialog with information about Qt.
Check for &Updates
Check for new version of Mumble
Connects to the Mumble webpage to check if a new version is available, and notifies you with an appropriate download URL if this is the case.
Sends a text message to all users in a channel.
Configure certificates for strong authentication
This starts the wizard for creating, importing and exporting certificates for authentication against servers.
Register user on server
This will permanently register the user on the server.
Add &Friend
Adds a user as your friend.
This will add the user as a friend, so you can recognize him on this and other servers.
&Remove Friend
Removes a user from your friends.
This will remove a user from your friends list.
&Update Friend
Update name of your friend.
Your friend uses a different name than what is in your database. This will update the name.
Edit registered users list
This opens the editor for registered users, which allow you to change their name or unregister them.
Add or remove text-based access tokens
&Minimal View
Toggle minimal window modes
This will toggle minimal mode, where the log window and menu is hidden.
You muted and deafened %1.
You unmuted and undeafened %1.
You undeafened %1.
You suppressed %1.
%1 muted and deafened by %2.
%1 unmuted and undeafened by %2.
%1 undeafened by %2.
%1 suppressed by %2.
%1 moved to %2.
%1 moved to %2 by %3.
%1 moved in from %2 by %3.
%1 is now muted and deafened.
Your account information can not be verified currently. Please try again later
Welcome message: %1
Mumble: %1
You were denied %1 privileges in %2.
%3 was denied %1 privileges in %2.
Denied: Cannot modify SuperUser.
Denied: Invalid channel name.
Denied: Text message too long.
Denied: Operation not permitted in temporary channel.
You need a certificate to perform this operation.
%1 does not have a certificate.
Invalid username: %1.
Invalid username.
Channel is full.
Channel nesting limit reached.
Channel count limit reached. Need to delete channels before creating new ones.
Permission denied.
%1 connected and entered channel.
%1 connected.
%1 is now muted.
%1 is now unmuted.
Recording started
Recording stopped
%1 started recording.
%1 stopped recording.
You revoked your priority speaker status.
You assumed priority speaker status.
%1 revoked your priority speaker status.
%1 gave you priority speaker status.
You revoked priority speaker status for %1.
You gave priority speaker status to %1.
%1 revoked own priority speaker status.
%1 assumed priority speaker status.
%1 revoked priority speaker status for %2.
%1 gave priority speaker status to %2.
You were unmuted and undeafened by %1.
You were muted by %1.
You were undeafened by %1.
You were suppressed.
You were suppressed by %1.
You were unsuppressed.
You were unsuppressed by %1.
You joined %1.
You moved %1 to %2.
%1 is recording
%1 renamed to %2 by %3.
%1 disconnected.
Server
message from
Failed to load Opus, it will not be available for audio encoding/decoding.
The server requests minimum client version %1
The server requests positional audio be enabled.
The server requests positional audio be disabled.
The server requests Push-to-Talk be enabled.
The server requests Push-to-Talk be disabled.
You were unmuted by %1.
You muted %1.
You unsuppressed %1.
You unmuted %1.
%1 muted by %2.
%1 unsuppressed by %2.
%1 unmuted by %2.
Unable to find matching CELT codecs with other clients. You will not be able to talk to all users.
You were muted and deafened by %1.
You were deafened by %1.
You were kicked from the server by %1: %2.
%3 was kicked from the server by %1: %2.
You were kicked and banned from the server by %1: %2.
%3 was kicked and banned from the server by %1: %2.
You were moved to %1 by %2.
%1 entered channel.
Server connection rejected: %1.
Denied: %1.
%1 renamed to %2.
%1 left channel and disconnected.
Message from %1
You have User Dragging set to "Do Nothing" so the user wasn't moved.
You have Channel Dragging set to "Do Nothing" so the channel wasn't moved.
Unknown Channel Drag mode in UserModel::dropMimeData.
Remote controlling Mumble:
Invocation
Error: No RPC command specified
RPC
Welcome to Mumble.
Skipping version check in debug mode.
Hide Frame
Toggle showing frame on minimal window
This will toggle whether the minimal window should have a frame for moving and resizing.
&Unlink All
Reset the comment of the selected user.
&Join Channel
View comment in editor
Query server for connection information for user
S&erver
&Self
&Unlink Plugins
Register yourself on the server
Change your avatar image on this server
&Remove Avatar
Remove currently defined avatar image.
Icon Toolbar
Change your own comment
Recording
Priority Speaker
&Copy URL
Copies a link to this channel to the clipboard.
Ignore Messages
Locally ignore user's text chat messages.
Silently drops all text messages from the user.
Edit ban list on server
This lets you edit the server-side IP ban list.
&Filter on/off
Toggle the channel filter (Ctrl+F)
Enable or disable the filtering of select channels.
By default all empty channels will be filtered.
You can mark additional channels for filtering from
the channel's context menu.
Ctrl+F
&Hide Channel when Filtering
Reset the avatar of the selected user.
Locally adjust the user's speech volume.
Opens a dialog with a volume slider. Use this on other users in the same room.
&Developer
&Hide Mumble
Hides the main Mumble window.
Hides the main Mumble window. Restore by clicking on the tray icon or starting Mumble again.
Show the Developer Console
Shows the Mumble Developer Console, where Mumble's log output can be inspected.
&Connect...
&Ban list...
&Information...
&Kick...
&Ban...
Local Volume Adjustment...
Send &Message...
&Add...
&Remove...
&Edit...
Audio S&tatistics...
&Settings...
&Audio Wizard...
Developer &Console...
&About...
About &Speex...
About &Qt...
&Certificate Wizard...
&Register...
Registered &Users...
Change &Avatar...
&Access Tokens...
Reset &Comment...
Reset &Avatar...
View Comment...
&Change Comment...
R&egister...
Show
Shows the main Mumble window.
Server sync protocol violation. No user profile received.
Protocol violation. Server sent remove for occupied channel.
Listen to channel
Listen to this channel without joining it
Locally adjust the volume for this virtual ear.
&Listener
No action available...
Unable to %1 into %2 - Adding the respective access (password) token might grant you access.
No more listeners allowed in this channel.
You are not allowed to listen to more channels than you currently are.
You started listening to %1
%1 started listening to your channel
You stopped listening to %1
%1 stopped listening to your channel
Talking UI
Toggles the visibility of the TalkingUI.
Join user's channel
Joins the channel of this user.
Channels and users
Activity log
Chat message
Disable Text-To-Speech
Locally disable Text-To-Speech for this user's text chat messages.
Silently disables Text-To-Speech for all text messages from the user.
Tree
Channel
Sianel
Private
%1: %2
(%1) %2
Configuration file %1 does not exist or is not writable.
Hide/show main window
Global Shortcut
&Set Nickname...
Set a local nickname
Sets a local nickname for another user.
Usage: mumble rpc <action> [options]
It is possible to remote control a running instance of Mumble by using
the 'mumble rpc' command.
Valid actions are:
mute
Mute self
unmute
Unmute self
togglemute
Toggle self-mute status
deaf
Deafen self
undeaf
Undeafen self
toggledeaf
Toggle self-deafen status
starttalking
Start talking
stoptalking
Stop talking
Usage: mumble [options] [<url> | <plugin_list>]
<url> specifies a URL to connect to after startup instead of showing
the connection window, and has the following form:
mumble://[<username>[:<password>]@]<host>[:<port>][/<channel>[/<subchannel>...]][?version=<x.y.z>]
<plugin_list> is a list of plugin files that shall be installed
The version query parameter has to be set in order to invoke the
correct client version. It currently defaults to 1.2.0.
Valid options are:
-h, --help Show this help text and exit.
-m, --multiple
Allow multiple instances of the client to be started.
-c, --config
Specify an alternative configuration file.
If you use this to run multiple instances of Mumble at once,
make sure to set an alternative 'database' value in the config.
-n, --noidentity
Suppress loading of identity files (i.e., certificates.)
-jn, --jackname <arg>
Set custom Jack client name.
--license
Show the Mumble license.
--authors
Show the Mumble authors.
--third-party-licenses
Show licenses for third-party software used by Mumble.
--window-title-ext <arg>
Sets a custom window title extension.
--dump-input-streams
Dump PCM streams at various parts of the input chain
(useful for debugging purposes)
- raw microphone input
- speaker readback for echo cancelling
- processed microphone input
--print-echocancel-queue
Print on stdout the echo cancellation queue state
(useful for debugging purposes)
--translation-dir <dir>
Specifies an additional translation fir <dir> in which
Mumble will search for translation files that overwrite
the bundled ones
Directories added this way have higher priority than
the default locations used otherwise
--print-translation-dirs
Print out the paths in which Mumble will search for
translation files that overwrite the bundled ones.
(Useful for translators testing their translations)
--locale <locale>
Overwrite the locale in Mumble's settings with a
locale that corresponds to the given locale string.
If the format is invalid, Mumble will error.
Otherwise the locale will be permanently saved to
Mumble's settings.
Manual
Manual Mumble Positional Audio
Position
Lleoliad
X
Y
Z
m
Heading
Azimuth
Elevation
°
Meta data
Context
Cyd-destun
Identity
Set
State
Unhinge
Link
Activate
Display
How long silent user's positions should stay marked after they have stopped talking (in seconds).
Silent user displaytime:
NetworkConfig
Network
Connection
Use TCP compatibility mode
Use TCP compatability mode
<b>Enable TCP compatibility mode</b>.<br />This will make Mumble use only TCP when communicating with the server. This will increase overhead and cause lost packets to produce noticeable pauses in communication, so this should only be used if you are unable to use the default (which uses UDP for voice and TCP for control).
Reconnect when disconnected
<b>Reconnect when disconnected</b>.<br />This will make Mumble try to automatically reconnect after 10 seconds if your server connection fails.
Reconnect automatically
Proxy
Type
Type of proxy to connect through
Direct connection
HTTP(S) proxy
SOCKS5 proxy
Hostname
Hostname of the proxy
Force TCP mode
Enable QoS to prioritize packets
This will enable QoS, which will attempt to prioritize voice packets over other traffic.
Use Quality of Service
Defnyddio Ansawdd o Wasanaeth
Don't send certificate to server and don't save passwords. (Not saved).
<b>This will suppress identity information from the client.</b><p>The client will not identify itself with a certificate, even if defined, and will not cache passwords for connections. This is primarily a test-option and is not saved.</p>
Suppress certificate and password storage
<b>Type of proxy to connect through.</b><br />This makes Mumble connect through a proxy for all outgoing connections. Note: Proxy tunneling forces Mumble into TCP compatibility mode, causing all voice data to be sent via the control channel.
<b>Hostname of the proxy.</b><br />This field specifies the hostname of the proxy you wish to tunnel network traffic through.
Port
Porth
Port number of the proxy
<b>Port number of the proxy.</b><br />This field specifies the port number that the proxy expects connections on.
Username
Enw Defnyddiwr
Username for proxy authentication
<b>Username for proxy authentication.</b><br />This specifies the username you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.
Password
Cyfrinair
Password for proxy authentication
<b>Password for proxy authentication.</b><br />This specifies the password you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.
Mumble services
Check for new releases of Mumble automatically.
This will check for new releases of Mumble every time you start the program, and notify you if one is available.
Check for application updates on startup
Check for new releases of plugins automatically.
This will check for new releases of plugins every time you start the program, and download them automatically.
<b>Submit anonymous statistics.</b><br />Mumble has a small development team, and as such needs to focus its development where it is needed most. By submitting a bit of statistics you help the project determine where to focus development.
Submit anonymous statistics to the Mumble project
Submit anonymous statistics
Reconnect to last used server when starting Mumble
Reconnect to last server on startup
Ailgysylltu i'r gweinydd olaf ar gychwyn
Privacy
Prevent OS information being sent to Mumble servers and web servers
<b>Don't send OS information to servers</b><br/>
Prevents the client from sending potentially identifying information about the operating system to the Mumble server and web servers.
Do not send OS information to Mumble servers and web servers
When toggled this hides the public server list from the connect dialog
Hide public server list
Check for plugin updates on startup
Automatically download and install plugin updates
Overlay
Silent
Talking
Yn siarad
Whisper
Shout
Gweiddi
Channel
Sianel
Failed to create communication with overlay at %2: %1. No overlay will be available.
OverlayClient
Filter
Only talking
Talking and recently active
All in current channel
All in linked channels
Always show yourself
Configure recently active time (%1 seconds)...
Columns
Colofnau
Sort
Alphabetically
Yn ôl yr wyddor
Last state change
Edit...
Golygu...
Reset Zoom
Configure recently active time
Amount of seconds users remain active after talking:
OverlayConfig
To move the users, drag the little red dot.
To resize the users, mouse wheel over a user.
To resize the users, mousewheel over a user.
For more options, right click a user.
For more options, rightclick a user.
Ar gyfer fwy o opsiynau, gwnewch glic dde fel defnyddiwr.
Launcher Filter
Overlay
Choose executable
Choose application
Dewis rhaglen
Choose path
Load Overlay Presets
Mumble overlay presets (*.mumblelay)
Save Overlay Presets
Options
Opsiynau
Enable overlay.
Enable Overlay
This sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.<br />Please note that if you start Mumble after starting the application, or if you disable the overlay while the application is running, there is no safe way to restart the overlay without also restarting the application.
This sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.<br />Please note that if you start the application after starting Mumble, or if you disable the overlay while running, there is no safe way to restart the overlay without also restarting the application.
Layout
Blacklist
Whitelist
Uninstall Overlay
Overlay Installation
Mumble has detected that you do not have the Mumble Overlay installed.
Click the button below to install the overlay.
Install Mumble Overlay
Overlay Upgrade
Mumble has detected an old version of the overlay support files installed on your computer.
To upgrade these files to their latest versions, click the button below.
Upgrade Mumble Overlay
Display a frame counter in the overlay
Show FPS counter
Load an overlay preset from file
Load…
Llwytho...
Save your overlay settings to file
Save…
Cadw...
Set the overlay font.
Set the overlay text color.
Color
Lliw
Remove
Tynnu
Font
Ffont
FPS and Clock Display
Display a clock in the overlay showing the current local time (system time).
Show Clock
Dangod Cloc
Overlay Exceptions
Overlay Exception Mode
Allowed launchers
Add
Ychwanegu
Allowed programs
Allowed paths
Blacklisted programs
OverlayEditor
State
User is not talking
Nid yw'r defnyddiwr yn siarad
Passive
User is talking in your channel or a linked channel
Talking
Yn siarad
User is whispering to you privately
Private Whisper
User is shouting to your channel
Channel Whisper
Zoom
Chwyddo
Zoom Factor
Ffactor Chwyddo
Enabled Elements
User avatar, chosen by each user
Avatar
Afatar
User's name
Enw'r Defnyddiwr
Username
Enw Defnyddiwr
Name of user's channel, if outside your current channel
Channel
Sianel
Muted or deafened
Mute state
Bounding box, automatically shrunk to minimum size to contain all visible elements
Bounding box
Overlay Editor
Zoom level
OverlayEditorScene
Layout preset
Large square avatar
Avatar and Name
User Opacity
%1%
%1%
Object Opacity
Alignment
Left
Chwith
Center
Canol
Right
Dde
Top
Top
Bottom
Gwaelod
Color...
Lliw...
Font...
Ffont...
Bounding box
Pen width
Padding
Pen color
Fill color
Pick pen color
Pick fill color
Pick color
Dewis lliw
Pick font
Dewis ffont
PluginConfig
Plugins
Plugin has no configure function.
Plugin has no about function.
Options
Opsiynau
Enable plugins and transmit positional information
This allows plugins for supported games to fetch your in-game position and transmit it with each voice packet. This enables other users to hear your voice in-game from the direction your character is in relation to their own.
Link to Game and Transmit Position
Reloads all plugins
This rescans and reloads plugins. Use this if you just added or changed a plugin to the plugins directory.
&Reload plugins
Information about plugin
This shows a small information message about the plugin.
&About
&Gwybodaeth
Show configuration page of plugin
This shows the configuration page of the plugin, if any.
&Configure
Name
Enw
Enable
PA
KeyEvents
Install a plugin from a local file
Install plugin...
Unload the currently selected plugin. This will remove it from the plugin list for the current session.
Unload
The plugin was installed successfully
Unable to deactivate all requested features for plugin "%1"
Unable to load plugin "%1"
Whether the positional audio feature of this plugin should be enabled
This plugin does not provide support for positional audio
Whether this plugin has the permission to be listening to all keyboard events that occur while Mumble has focus
Whether this plugin should be enabled
PluginInstaller
PluginInstaller
You are about to install the plugin listed below. Do you wish to proceed?
<html><head/><body><p><span style=" font-weight:600;">Name:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Version:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Author(s):</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Description:</span></p></body></html>
&No
&Yes
The file "%1" is not a valid plugin file!
Found more than one plugin library for the current OS in "%1" ("%2" and "%3")!
Unable to find a plugin for the current OS in "%1"
Unable to load plugin "%1" - check the plugin interface!
Unable to delete old plugin at "%1"
Unable to copy plugin library from "%1" to "%2"
Unable to move plugin library to "%1"
PluginManager
%1 lost link
%1 linked
Plugin "%1" encountered a permanent error in positional data gathering
Non-plugin found in plugin directory: "%1"
Failed at loading manual plugin: %1
PluginUpdater
PluginUpdater
The following plugins can be updated.
Select all
Plugin
Download-URL
Do you want to update the selected plugins?
Unable to download plugin update for "%1" from "%2" (%3)
Update for plugin "%1" failed due to too many redirects
Unable to download plugin update for "%1" from "%2" (HTTP status code %3)
Successfully updated plugin "%1"
PortAudioSystem
Default device
PulseAudioSystem
Default Input
Default Output
QApplication
Failed to restart mumble
Mumble failed to restart itself. Please restart it manually.
Mumble is currently connected to a server
QObject
CodecInit: Failed to load Opus, it will not be available for encoding/decoding audio.
Talking UI
Echo cancellation is not supported for the interface combination "%1" (in) and "%2" (out).
<p>If you're using Linux this is most likely because you are using a version from your distribution's package repository that have their own update cycles.</p><p>If you want to always have the most recent Mumble version, you should consider using a different method of installation.
See <a href="https://wiki.mumble.info/wiki/Installing_Mumble">the Mumble wiki</a> for what alternatives there are.</p>
Local Mute
Ignore Messages
Disable Text-To-Speech
"%1" could not be saved permanently and is lost on restart because %2 does not have a certificate.
Local Volume Adjustment...
<p>You're using a Mumble version that <b>explicitly disabled</b> update-checks.</p><p>This means that the update notification you might receive by using this option will <b>most likely be meaningless</b> for you.</p>
Talking (muted)
All messages
Toggle console for all events
Toggle pop-up notifications for all events
Toggle window highlight (if not active) for all events
Click here to toggle sound notifications for all events
Toggle Text-to-Speech for all events
RNNoise is not available due to a sample rate mismatch.
Reset all settings?
Do you really want to reset all settings (not only the ones currently visible) to their default value?
Local Nickname Adjustment...
<b>Blocked URL scheme "%1"</b>
The URL uses a scheme that has been blocked for security reasons.
Blocked URL: "%1"
Default Device
Dyfais Diofyn
Access to the microphone was denied. Please allow Mumble to use the microphone by changing the settings in System Preferences -> Security & Privacy -> Privacy -> Microphone.
Access to the microphone was denied due to system restrictions. You will not be ableto use the microphone in this session.
If enabled this tries to cancel out echo from the audio stream.
Disabled
Echo cancellation is disabled.
Mixed echo cancellation (speex)
Mixed has low CPU impact, but only works well if your speakers are equally loud and equidistant from the microphone.
Multichannel echo cancellation (speex)
Multichannel echo cancellation provides much better echo cancellation, but at a higher CPU cost. Multichannel echo cancellation requires more CPU, so you should try mixed first.
The provided URL uses an invalid version format: "%1"
The directories in which Mumble searches for extra translation files are:
Invocation
EXPERIMENTAL: Acoustic echo cancellation (Apple).
The support for this option is experimental only! This option works best when using built-in microphone and speaker.
RichTextEditor
Failed to load image
Methodd llwytho'r delwedd
Image file too large to embed in document. Please use images smaller than %1 kB.
Message is too long.
Mae'r neges rhy hir.
Display
Source Text
Testyn Gwreiddiol
&Bold
&Print Trwm
Ctrl+B
Ctrl+B
&Italic
&Italig
Italic
Italig
Ctrl+I
Ctrl+I
Underline
Tanlinellu
Ctrl+U
Ctrl+U
Color
Lliw
Insert Link
Ctrl+L
Ctrl+L
Insert Image
RichTextEditorLink
Add Link
Ychwanegu Cysylltiad
URL
URL
Text
Testyn
ServerHandler
Unable to resolve hostname
Server is not responding to TCP pings
UDP packets cannot be sent to or received from the server. Switching to TCP mode.
UDP packets cannot be sent to the server. Switching to TCP mode.
UDP packets cannot be received from the server. Switching to TCP mode.
UDP packets can be sent to and received from the server. Switching back to UDP mode.
Connection timed out
ServerInformation
Server information
Server Information
<b>Host:</b>
<html><head/><body><p><span style=" font-weight:600;">Port:</span></p></body></html>
<b>Users</b>:
<html><head/><body><p><span style=" font-weight:600;">Protocol:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Release:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">OS:</span></p></body></html>
Audio
<html><head/><body><p><span style=" font-weight:600;">Allowed:</span></p></body></html>
<b>Current:</b>
<b>Codec:</b>
Connection details
UDP (Voice)
<b>Encryption:</b>
<b>Avg. latency:</b>
Statistics
Good
Da
Late
Hwyr
Lost
Wedi'i golli
Resync
Outgoing
Incoming
Voice packets is currently sent over TCP.
TCP (Control)
<b>TLS version:</b>
<b>Cipher suite:</b>
<forward secrecy>
&View certificate
&Ok
Unknown
The connection provides perfect forward secrecy.
The connection does NOT provide perfect forward secrecy.
No information about forward secrecy available.
ServerView
Favorite
Ffefrynu
LAN
LAN
Public Internet
Rhyngwyd Cyhoeddus
ShortcutActionWidget
Unassigned
ShortcutDelegate
On
Ymlaen
Off
I ffwrdd
Toggle
Unassigned
No buttons assigned
Press to show button combination
ShortcutTargetDialog
Root
Tardd
Parent
Rhiant
Current
Subchannel #%1
ShortcutTargetWidget
...
...
,
,
Root
Tardd
Parent
Rhiant
Current
Subchannel #%1
Invalid
Empty
<Empty>
Gwag
Current selection
ShortcutToggleWidget
Off
I ffwrdd
Toggle
On
Ymlaen
TextMessage
Enter text
If checked the message is recursively sent to all subchannels
Send recursively to subchannels
Message
Tokens
Empty Token
Tocyn Gwag
Mumble - Access Tokens
Mumble - Tocynnau Mynediad
List of access tokens on current server
<b>This is an editable list of access tokens on the connected server.</b>
<br />
An access token is a text string, which can be used as a password for very simple access management on channels. Mumble will remember the tokens you've used and resend them to the server next time you reconnect, so you don't have to enter these every time.
Add a token
Ychwanegwch tocyn
&Add
&Ychwanegu
Remove a token
&Remove
&Tynnu
Tokens
UserEdit
Registered Users
Defnyddwyr Cofrestredig
Remove
Tynnu
Rename
Ail-enwi
Who are you looking for?
Beth rydach yn chwilio amdano?
Days
Dydd
Weeks
Wythnos
Months
Mis
Years
Blwyddyn
Inactive for
Registered users: %n account(s)
Search
User list
UserInformation
User Information
Gwybodaeth Am Y Defnyddiwr
Connection Information
Gwybodaeth Am Y Cysylltiad
Version
Fersiwn
OS
OS
Certificate
Tystysgrif
IP Address
Cyfeiriad IP
CELT Versions
Fersiynau CELT
Details...
Manylion...
Ping Statistics
Pings received
Average ping
TCP (Control)
UDP (Voice)
UDP Network statistics
Good
Da
Late
Hwyr
Lost
Wedi'i golli
Resync
From Client
To Client
Connection time
Amser a chysylltwyd
%1w
%1w
%1d
%1d
%1h
%1h
%1m
%1m
%1s
%1s
,
,
%1 (%2)
%1.%2.%3 (%4)
%1 (%2)
Supported
Not Supported
Not Reported
%1 online (%2 idle)
%1 ar-lein (%2 yn segur)
%1 online
%1 ar-lein
%1 kbit/s
%1 kbit/s
Bandwidth
GroupBox
Lled Band
Bandwidth
Label
Lled Band
Ping deviation
UserListModel
Nick
Nick
Inactive days
Last channel
Sianel olaf
Last seen: %1
Gwelwyd diwethaf: %1
Never
Byth
Channel ID: %1
UserLocalNicknameDialog
Local nickname for other users
<b>Adjust the nickname of other users locally</b><br />
User nickname
Adjusting local nickname for %1
UserLocalVolumeDialog
Local volume for other users
<b>Adjust the volume of other users locally</b><br />Mumble supports adjusting the volume of other users locally.
Adjusting local volume for %1
dB
<html><head/><body><p>Use the slider or the text box to change the volume of the user.</p><p><span style="font-weight:600;">Attention!</span></p><p>Increasing the volume of a user too much can permanently damage your hearing. It may also increase the background noise of the user.</p></body></html>
User volume
UserModel
This is a user connected to the server. The icon to the left of the user indicates whether or not they are talking:
Talking to your channel.
Shouting directly to your channel.
Whispering directly to your channel.
Whispering directly to you.
Not talking.
Ddim yn siarad.
This is a channel on the server. The icon indicates the state of the channel:
Your current channel.
A channel that is linked with your channel. Linked channels can talk to each other.
A channel on the server that you are not linked to.
This shows the flags the user has on the server, if any:
On your friend list
Ar eich rhestr ffrindiau
Authenticated user
Muted (manually muted by self)
Muted (manually muted by admin)
Muted (not allowed to speak in current channel)
Muted (muted by you, only on your machine)
Muted (push-to-mute)
Deafened (by self)
Deafened (by admin)
User has a new comment set (click to show)
User has a comment set, which you've already seen. (click to show)
Ignoring Text Messages
Yn Anwybyddu Negeseuon Testun
This shows the flags the channel has, if any:
Channel has a new comment set (click to show)
Channel has a comment set, which you've already seen. (click to show)
Channel will be hidden when filtering is enabled
Name
Enw
Flags
Fflagiau
Are you sure you want to drag this user?
Are you sure you want to drag this channel?
Ydach yn siwr rydach eisio llusgo'r sianel hyn?
Cannot perform this movement automatically, please reset the numeric sorting indicators or adjust it manually.
Talking while being muted on your end
This is a channel listener. The corresponding user hears everything you say in this channel.
Channel has access restrictions so that you can't enter it
Channel has access restrictions but you can enter nonetheless
VersionCheck
Upgrade Mumble
Uwchraddio Mumble
A new version of Mumble has been detected and automatically downloaded. It is recommended that you either upgrade to this version, or downgrade to the latest stable release. Do you want to launch the installer now?
Cafodd fersiwn newydd o Mumble ei darganfod a'i lawrlwytho'n awtomatig. Mae'n argymelladwy eich bod yn uwchraddio i'r fersiwn hon, neu lawr-raddio i'r fersiwn cadarn fwyaf diweddar. Ydach eisio cychwyn yr gosodwr rwan?
Failed to launch snapshot installer.
Corrupt download of new version detected. Automatically removed.
Downloading new snapshot from %1 to %2
Failed to write new version to disk.
Failed to write new version to disc.
Mumble failed to retrieve version information from the central server.
ViewCert
Certificate Chain Details
Certificate chain
Certificate details
Manylion tystysgrif
Common Name
Organization
Subunit
Country
Locality
State
Valid from: %1
Dilys o: %1
Valid to: %1
Dilys tan: %1
Serial: %1
Public Key: %1 bits %2
RSA
RSA
DSA
DSA
Digest (SHA-1): %1
Digest (SHA-256): %1
Email: %1
E-bost: %1
DNS: %1
DNS: %1
Issued by:
Cyhoeddwyd gan:
Unit Name
VoiceRecorder
Recorder failed to create directory '%1'
Methodd y recordydd creu'r lleoliad '%1'
Recorder failed to open file '%1'
Methodd yr recordydd agor yr ffeil '%1'
.wav - Uncompressed
.wav - Heb ei chywasgu
.ogg (Vorbis) - Compressed
.ogg (Vorbis) - Wedi'i chywasgu
.au - Uncompressed
.au - Heb ei chywasgu
.flac - Lossless compressed
.flac - Cywasgu heb golled
VoiceRecorderDialog
Recorder
Recordydd
Control
Rheoli
00:00:00
00:00:00
&Start
&Dechrau
S&top
S&top
Mode
Modd
Multichannel
Output
Allbwn
Output format
Fformat allbwn
Target directory
Lleoliad targed
Filename
Enw'r ffeil
&Browse...
&Pori
Valid variables are:
Inserts the user's name
Yn mewnosod enw'r defnyddiwr
Inserts the current date
Yn mewnosod yr dyddiad cyfredol
Inserts the current time
Yn mewnosod yr amser cyfredol
Inserts the hostname
Yn mewnosod yr enw lletywr
Recorder still running
Mae'r recordydd dal yn rhedeg
Closing the recorder without stopping it will discard unwritten audio. Do you really want to close the recorder?
Unable to start recording. Not connected to a server.
Methy cychwyn recordio. Heb cysylltu i gweinydd.
The server you are currently connected to is version 1.2.2 or older. For privacy reasons, recording on servers of versions older than 1.2.3 is not possible.
Please contact your server administrator for further information.
Mae'r gweinydd rydach wedi ei gysylltu ag ar y funud yn fersiwn 1.2.2 neu hyn. Oherwydd rhesymau preifatrwydd, nid yw recordio yn bosib ar fersiynau hyn na 1.2.3.
Cysylltwch â gweinyddwr y gweinydd ar gyfer gwybodaeth bellach.
There is already a recorder active for this server.
Please select a recording format.
Dewisiwch fformat recordio.
Stopping
Stopio
Select target directory
Downmix
WASAPIInput
Access to the microphone was denied. Please check that your operating system's microphone settings allow Mumble to use the microphone.
WASAPISystem
Default Device
Dyfais Diofyn
qwPTTButtonWidget
Mumble PTT
PTT Mumble
Push to talk
Gwthio i siarad