ACLEditorDenyMalpermesiAllowPermesiAllow %1Permesi na %1Deny %1Malpermesi na %1Mumble - Add channelMumble - Aldoni kanalonDefault server valueDefaŭlta serviloFailed: Invalid channelMalsukcesis: Nevalida kanaloMumble - Edit %1Mumble - Redakti na %1ID: %1identigilo: %1This grants the %1 privilege. If a privilege is both allowed and denied, it is denied.<br />%2Tiu koncedas la privilegion %1. Se privilegio estas kaj permesata kaj malpermesata, ĝi estas malpermesata.<br />%2Channel must have a nameLa kanalo devas havi nomonThis revokes the %1 privilege. If a privilege is both allowed and denied, it is denied.<br />%2Tiu forprenas la privilegion %1. Se privilegio estas kaj permesata kaj malpermesata, ĝi estas malpermesata.<br />%2DialogDialogoNameNomoEnter the channel name here.Enigu la kanal-nomon ĉi tien.DescriptionPriskriboPasswordPasvortoEnter the channel password here.Enigu la kanal-pasvorton ĉi tien.Check to create a temporary channel.Kontroli por krei provizoran kanalon.TemporaryKelkatempa<b>Position</b><br/>
This value enables you to change the way Mumble arranges the channels in the tree. A channel with a higher <i>Position</i> value will always be placed below one with a lower value and the other way around. If the <i>Position</i> value of two channels is equal they will get sorted alphabetically by their name.<b>Position</b><br/>
This value enables you to change the way mumble arranges the channels in the tree. A channel with a higher <i>Position</i> value will always be placed below one with a lower value and the other way around. If the <i>Position</i> value of two channels is equal they will get sorted alphabetically by their name.<b>Pozicio</b><br/>
Tiu ĉi valoro ebligas al vi ŝanĝi kiel Mumble disponas la kanalojn en la arbo. Kanalo kun pli alta <i>Pozicia</i> valoro ĉiam estos metita sub alian kun pli malalta valoro, samo validas se male. Se la <i>Pozicia</i> valoro de du kanaloj estas egalaj, ili nome ordiĝos laŭalfabete.
PositionPozicio&Groups&GrupojGroupGrupoList of groupsListo da grupojRemove selected groupForigi la elektitan gruponRemoveForigiInherit group members from parentHeredi grup-anojn de patra objektoInheritHerediMake group inheritable to sub-channelsIgi grupon heredebla al sub-kanalojInheritableNeheredeblaGroup was inherited from parent channelGrupo estis heredita de patra kanaloInheritedHereditaMembersMembrojAddAldoniAdd member to groupAldoni anon al grupoRemove member from groupForigi anon de grupo&ACL&ACLActive ACLsAktivaj ACLojList of entriesListo da elementojInherit ACL of parent?Ĉu heredu ACLon de patro?This sets whether or not the ACL up the chain of parent channels are applied to this object. Only those entries that are marked in the parent as "Apply to sub-channels" will be inherited.Inherit ACLsHeredi ACLojnMove entry upMovi elementon suprenThis moves the entry up in the list. As entries are evaluated in order, this may change the effective permissions of users. You cannot move an entry above an inherited entry, if you really need that you'll have to duplicate the inherited entry.&UpSu&prenMove entry downMovi elementon subenThis moves the entry down in the list. As entries are evaluated in order, this may change the effective permissions of users.&DownSu&benAdd new entryAldoni novan elementonThis adds a new entry, initially set with no permissions and applying to all.&Add&AldoniRemove entryForigi elementonThis removes the currently selected entry.Tio forigas la nune elektatan eron.&Remove&ForigiContextKuntekstoEntry should apply to this channel.Entry should apply to this channelLa ero estu rilata al tiu ĉi kanalo.This makes the entry apply to this channel.Tio Applies to this channelEntry should apply to sub-channels.Add new groupAldoni novan gupon<b>Add</b><br/>
Add a new group.<b>Aldoni</b><br/>
Aldoni novan grupon.Inherited membersHeriditaj anojContains the list of members added to the group by this channel.Enhavas la liston da anoj, kiuj aldoniĝis de ĉi tiu kanalo al la grupo.Contains a list of members whose group membership will not be inherited from the parent channel.Enhavas liston da anoj kies grup-aneco ne estos heredita de patra kanalo.Contains the list of members inherited by other channels.Enhavas la liston da anoj, kiuj estis hereditaj de aliaj kanaloj.Type in the name of a user you wish to add to the group and click Add.Entajpu la nomon de uzanto, kiun vi volas aldoni al grupon kaj klaku Aldoni!Type in the name of a user you wish to remove from the group and click Add.Entajpu la nomon de uzanto, kiun vi volas forigi de grupo kaj klaku Aldoni!ExcludeBariExcluded membersBaritaj membrojThis makes the entry apply to sub-channels of this channel.Tiu igos la eron efektivigi al la sub-kanaloj de tiu kanalo.Applies to sub-channelsEfektivigas al sub-kanalojPermissionsPermesojUser/GroupUzanto/GrupoGroup this entry applies toGrupo, al kiu tiu ĉi elemento aplikasUser IDUzant-identigiloUser this entry applies toUzanto, al kiu tiu ĉi elemento aplikasThis controls which user this entry applies to. Just type in the user name and hit enter to query the server for a match.Tiu kontrolas al kiu uzanto tiu ero efektivigas. Simple entajpu la uzant-nomon kaj presu la enig-klavon por igi la servilon serĉi kongruon.&Properties&Atributoj<b>Name</b><br />Enter the channel name in this field. The name has to comply with the restriction imposed by the server you are connected to.<b>Nomo</b><br />Entajpu la kanal-nomon en tiun areon. La nomo devas obei la regulojn de la servilo, al kiu vi konektatas.<b>Temporary</b><br />
When checked the channel created will be marked as temporary. This means when the last player leaves it the channel will be automatically deleted by the server.<b>Provizora</b><br />
Se kontrolita, la kreita kanalo estos markita kiel provizora. Ĉi tio indikas, ke la kanalo estos forigita aŭtomate post la lasta ludanto estas forlasinta.<b>Group</b><br />
These are all the groups currently defined for the channel. To create a new group, just type in the name and press enter.<b>Grupo</b><br />
Ĉi tiuj nuntempe estas ĉiuj difinitaj grupoj por la kanalo. Por krei novan grupon, kaj entajpu la nomon kaj premu la enigan klavon.<b>Remove</b><br />This removes the currently selected group. If the group was inherited, it will not be removed from the list, but all local information about the group will be cleared.<b>Inherit</b><br />This inherits all the members in the group from the parent, if the group is marked as <i>Inheritable</i> in the parent channel.<b>Inheritable</b><br />This makes this group inheritable to sub-channels. If the group is non-inheritable, sub-channels are still free to create a new group with the same name.<b>Inherited</b><br />This indicates that the group was inherited from the parent channel. You cannot edit this flag, it's just for information.<b>Members</b><br />
This list contains all members that were added to the group by the current channel. Be aware that this does not include members inherited by higher levels of the channel tree. These can be found in the <i>Inherited members</i> list. To prevent this list to be inherited by lower level channels uncheck <i>Inheritable</i> or manually add the members to the <i>Excluded members</i> list.<b>Excluded members</b><br />
Contains a list of members whose group membership will not be inherited from the parent channel.<b>Inherited members</b><br />
Contains the list of members inherited by the current channel. Uncheck <i>Inherit</i> to prevent inheritance from higher level channels.This controls which group of users this entry applies to.<br />Note that the group is evaluated in the context of the channel the entry is used in. For example, the default ACL on the Root channel gives <i>Write</i> permission to the <i>admin</i> group. This entry, if inherited by a channel, will give a user write privileges if he belongs to the <i>admin</i> group in that channel, even if he doesn't belong to the <i>admin</i> group in the channel where the ACL originated.<br />If a group name starts with '!', its membership is negated, and if it starts with '~', it is evaluated in the channel the ACL was defined in, rather than the channel the ACL is active in.<br />If a group name starts with '#', it is interpreted as an access token. Users must have entered whatever follows the '#' in their list of access tokens to match. This can be used for very simple password access to channels for non-authenticated users.<br />If a group name starts with '$', it will only match users whose certificate hash matches what follows the '$'.<br />A few special predefined groups are:<br /><b>all</b> - Everyone will match.<br /><b>auth</b> - All authenticated users will match.<br /><b>sub,a,b,c</b> - User currently in a sub-channel minimum <i>a</i> common parents, and between <i>b</i> and <i>c</i> channels down the chain. See the website for more extensive documentation on this one.<br /><b>in</b> - Users currently in the channel will match (convenience for '<i>sub,0,0,0</i>').<br /><b>out</b> - Users outside the channel will match (convenience for '<i>!sub,0,0,0</i>').<br />Note that an entry applies to either a user or a group, not both.<b>Password</b><br />This field allows you to easily set and change the password of a channel. It uses Mumble's access tokens feature in the background. Use ACLs and groups if you need more fine grained and powerful access control.<b>Pasvorto</b><br />Ĉi tiu kampo vin permesas agordi kaj ŝanĝi facile la pasvorton de iu kanalo. Ĝi uzas la atingoĵetona trajto de Murmur fone. Se vi necesas pli detala kaj pli potenca atingokontrolo, uzi ACL-ojn kaj grupojn.This shows all the entries active on this channel. Entries inherited from parent channels will be shown in italics.<br />ACLs are evaluated top to bottom, meaning priority increases as you move down the list.ID of the channel.Identigilo de la kanalo.Maximum UsersMaksimumaj UzantojMaximum number of users allowed in the channelMaksimuma nombro da uzantoj permesitaj en la kanalo<b>Maximum Users</b><br />
This value allows you to set the maximum number of users allowed in the channel. If the value is above zero, only that number of users will be allowed to enter the channel. If the value is zero, the maximum number of users in the channel is given by the server's default limit.This is the sort order for the channel.Ĉi tiu estas la ordiga ordo por la kanalo.PropertiesEcojChannel passwordPasvorto de kanaloMaximum usersMaksimumaj uzantojChannel nameKanalnomoInherited group membersForeign group membersInherited channel membersAdd members to groupAldoni membrojn al la grupoList of ACL entriesALSAAudioInputDefault ALSA CardDefaŭlta Karto de ALSAOpening chosen ALSA Input failed: %1ALSAAudioOutputDefault ALSA CardDefaŭlta Karto de ALSAOpening chosen ALSA Output failed: %1ALSAEnumeratorGetting name (longname) of the sound card failed: %1Getting name of the sound card failed: %1ASIOConfig%1 (version %2)%1 (versiono %2)%1 -> %2 samples buffer, with %3 sample resolution (%4 preferred) at %5 Hz%1 -> %2 samples buffer, with %3 sample resolution (%4 preferred) at %5HzASIO Initialization failed: %1Failed to instantiate ASIO driverASIOASIODevice selectionAprarat-elektoDeviceAparatoDevice to use for microphoneThis chooses what device to query. You still need to actually query the device and select which channels to use.Query selected deviceThis queries the selected device for channels. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.&QueryConfigure selected deviceThis configures the selected device. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.&Configure&AgordiCapabilitiesEblecoDriver namePelil-nomoBuffer sizeThis will configure the input channels for ASIO. Make sure you select at least one channel as microphone and speaker. <i>Microphone</i> should be where your microphone is attached, and <i>Speaker</i> should be a channel that samples '<i>What you hear</i>'.<br />For example, on the Audigy 2 ZS, a good selection for Microphone would be '<i>Mic L</i>' while Speaker should be '<i>Mix L</i>' and '<i>Mix R</i>'.Configure input channelsChannelsKanalojMicrophoneMikrofono<-<-->->UnusedNeuzataSpeakersParolantojList of microphonesList of speakersASIOInputYou need to select at least one microphone and one speaker source to use ASIO.Opening selected ASIO device failed. No input will be done.AboutDialogAbout MumblePri Mumble&About Mumble&Pri Mumble&License&PermesiloA&uthors&Third-Party LicensesOKKonfirmiLicense agreementAuthorsAŭtorojThird-party license agreements<h3>Mumble (%1)</h3><p>%3</p><p><b>An Open Source, low-latency, high quality voice-chat utility</b></p><p><tt><a href="%2">%2</a></tt></p>AudioInputInterfaceInterfacoSystemSistemoInput method for audioDeviceAparatoInput device for audioEniga aparato por sono<b>This is the input device to use for audio.</b>TransmissionTranssendo&Transmit&TranssendiWhen to transmit your speechKiam transsendi vian voĉon<b>This sets when speech should be transmitted.</b><br /><i>Continuous</i> - All the time<br /><i>Voice Activity</i> - When you are speaking clearly.<br /><i>Push To Talk</i> - When you hold down the hotkey set under <i>Shortcuts</i>.DoublePush TimeIf you press the PTT key twice in this time it will get locked.<b>DoublePush Time</b><br />If you press the push-to-talk key twice during the configured interval of time it will be locked. Mumble will keep transmitting until you hit the key once more to unlock PTT again.Reset audio cue to default<b>Reset</b><br/>Reset the paths for the files to their default.Browse for on audio fileBrowse for off audio fileOffMalŝaltitaOnEnŝaltiPreview the audio cuesUse SNR based speech detectionSignal to NoiseProporcio de signalo al bruo<b>This sets speech detection to use Amplitude.</b><br />In this mode, the raw strength of the input signal is used to detect speech.AmplitudeamplitudoVoice &HoldHow long to keep transmitting after silenceSilence BelowSilenteco Sube<b>This sets the trigger values for voice detection.</b><br />Use this together with the Audio Statistics window to manually tune the trigger values for detecting speech. Input values below "Silence Below" always count as silence. Values above "Speech Above" always count as voice. Values in between will count as voice if you're already talking, but will not trigger a new detection.Speech AboveParolado PretereSignal values above this count as voiceCompressionDensigo&Quality&KvalitoQuality of compression (peak bandwidth)<b>This sets the quality of compression.</b><br />This determines how much bandwidth Mumble is allowed to use for outgoing audio.Audio per packetHow many audio frames to send per packet<b>This selects how many audio frames should be put in one packet.</b><br />Increasing this will increase the latency of your voice, but will also reduce bandwidth requirements.<b>This shows peak outgoing bandwidth used.</b><br />This shows the peak amount of bandwidth sent out from your machine. Audio bitrate is the maximum bitrate (as we use VBR) for the audio data alone. Position is the bitrate used for positional information. Overhead is our framing and the IP packet headers (IP and UDP is 75% of this overhead).Audio ProcessingNoise suppression<b>This sets the amount of noise suppression to apply.</b><br />The higher this value, the more aggressively stationary noise will be suppressed.Maximum amplification of input sound<b>Maximum amplification of input.</b><br />Mumble normalizes the input volume before compressing, and this sets how much it's allowed to amplify.<br />The actual level is continually updated based on your current speech pattern, but it will never go above the level specified here.<br />If the <i>Microphone loudness</i> level of the audio statistics hover around 100%, you probably want to set this to 2.0 or so, but if, like most people, you are unable to reach 100%, set this to something much higher.<br />Ideally, set it so <i>Microphone Loudness * Amplification Factor >= 100</i>, even when you're speaking really soft.<br /><br />Note that there is no harm in setting this to maximum, but Mumble will start picking up other conversations if you leave it to auto-tune to that level.Current speech detection chanceAktuala ŝanco de rekono de paroladoEnabling this will cancel the echo from your speakers. Mixed has low CPU impact, but only works well if your speakers are equally loud and equidistant from the microphone. Multichannel echo cancellation provides much better echo cancellation, but at a higher CPU cost.DisabledElŝaltite<b>This sets speech detection to use Signal to Noise ratio.</b><br />In this mode, the input is analyzed for something resembling a clear signal, and the clarity of that signal is used to trigger speech detection.<b>This shows the current speech detection settings.</b><br />You can change the settings from the Settings dialog or from the Audio Wizard.Signal values below this count as silenceMaximum bandwidth used for sending audioUse Amplitude based speech detection<b>This selects how long after a perceived stop in speech transmission should continue.</b><br />Set this higher if your voice breaks up when you speak (seen by a rapidly blinking voice icon next to your name).Exclusive modeEkskluziva reĝimo<b>This opens the device in exclusive mode.</b><br />No other application will be able to use the device.ExclusiveEkskluziveR&esetR&eŝargi&Browse...&Foliumi...B&rowse...F&oliumi...&Preview&Antaŭrigardo<b>Preview</b><br/>Plays the current <i>on</i> sound followed by the current <i>off</i> sound.Displays an always on top window with a push to talk button in itDisplay push to talk windowMiscAliaAudible audio cue when starting or stopping to transmit<b>This enables transmission audio cues.</b><br />Setting this will give you a short audio beep when you start and stop transmitting.Audio cueGets played when starting to transmitGets played when stopping to transmitHold TimeTime the microphone stays open after the PTT key is releasedServer maximum network bandwidth is only %1 kbit/s. Audio quality auto-adjusted to %2 kbit/s (%3 ms)Max. AmplificationIdle actionminutes donothingneniodeafensurdigimutemutigiafterpostEcho CancellationThe idle action will be reversed upon any key or mouse button inputUndo Idle action upon activityAudio input<b>This is the input method to use for audio.</b>Enable Opus' low-delay mode when the quality is set to <b>64 kb/s</b> or higher. If checked, Mumble will enable Opus' low-delay mode when the quality is set to <b>64 kbit/s</b> or higher. Low-delay mode decreases latency by <b>~15 milliseconds</b> in the round trip. This mode may require an higher bitrate to preserve the same quality, in comparison with the music and VOIP modes.Allow low delay modeDon't use noise suppression.Use the noise suppression algorithm provided by Speex.Use the noise suppression algorithm provided by RNNoise.Use a combination of Speex and RNNoise to do noise suppression.BothThis controls the amount by which Speex will suppress noise.Speex suppression strengthAudioInputDialogContinuousVoice ActivityPush To TalkPremi Por ParoliAudio Input%1 ms%1 msOffMalŝaltita%1 s%1 s%1 kb/s%1 kb/s-%1 dB-%1 dB%1 kbit/s (Audio %2, Position %4, Overhead %3)Audio systemInput deviceEcho cancellation modeTransmission modePTT lock thresholdPTT hold thresholdSilence belowCurrent speech detection chanceAktuala ŝanco de rekono de paroladoSpeech aboveSpeech belowAudio per packetQuality of compression (peak bandwidth)Noise suppressionMaximum amplificationTransmission started soundTransmission stopped soundInitiate idle action after (in minutes)Idle actionAccess to the microphone was denied. Please allow Mumble to use the microphone by changing the settings in System Preferences -> Security & Privacy -> Privacy -> Microphone.Access to the microphone was denied. Please check that your operating system's microphone settings allow Mumble to use the microphone.DisabledElŝaltiteDisable echo cancellation.AudioOutputInterfaceInterfacoSystemSistemoOutput method for audioDeviceAparatoOutput device for audio<b>This is the output device to use for audio.</b>Positional AudioPozicia SonoAudio OutputSon-eligoDefault &Jitter BufferSafety margin for jitter buffer<b>This sets the minimum safety margin for the jitter buffer.</b><br />All incoming audio is buffered, and the jitter buffer continually tries to push the buffer to the minimum sustainable by your network, so latency can be as low as possible. This sets the minimum buffer size to use. If the start of sentences you hear is very jittery, increase this value.Minimum distance to user before sound volume decreasesThis sets the minimum distance for sound calculations. The volume of other users' speech will not decrease until they are at least this far away from you.This sets the maximum distance for sound calculations. When farther away than this, other users' speech volume will not decrease any further.<b>This enables one of the loopback test modes.</b><br /><i>None</i> - Loopback disabled<br /><i>Local</i> - Emulate a local server.<br /><i>Server</i> - Request loopback from server.<br />Please note than when loopback is enabled, no other users will hear your voice. This setting is not saved on application exit.VolumeLaŭtecoVolume of incoming speechLaŭteco de venanta voĉo<b>This adjusts the volume of incoming speech.</b><br />Note that if you increase this beyond 100%, audio will be distorted.Output DelayAmount of data to bufferKiom da datenoj por bufriThe connected "speakers" are actually headphonesThe connected "speakers" are actually headphones.Factor for sound volume decreaseBloomFactor for sound volume increaseHow much should sound volume increase for sources that are really close?Checking this indicates that you don't have speakers connected, just headphones. This is important, as speakers are usually in front of you, while headphones are directly to your left/right.This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn't cause rapid jitter in the sound.HeadphonesKapaŭskultilojMinimum DistanceMinimuma DistancoMaximum Distance Maksimuma DistancoMaximum distance, beyond which speech volume won't decreaseMinimum VolumeMinimuma SonfortecoWhat should the volume be at the maximum distance?Loopback TestTesto de Inversa CikloDelay VarianceVariance in packet latency<b>This sets the packet latency variance for loopback testing.</b><br />Most audio paths contain some variable latency. This allows you to set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.<b>This sets the packet latency variance for loopback testing.</b><br />Most audio paths contain some variable latency. This allows you set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.Packet LossPerditaj PaketojPacket loss for loopback modePerditaj paketoj en la reĝimo de inversa ciklo<b>This sets the packet loss for loopback mode.</b><br />This will be the ratio of packets lost. Unless your outgoing bandwidth is peaked or there's something wrong with your network connection, this will be 0%&LoopbackInversa Cik&loDesired loopback modeDezirita reĝimo de inversa cikloAttenuate applications by...Atenui aplikaĵojn de...Attenuation of other applications during speechAtenuo de aliaj aplikaĵoj dum parolado<b>Attenuate volume of other applications during speech</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This sets the attenuation of other applications if the feature is enabled.If checked Mumble lowers the volume of other applications while other users talk<b>Attenuate applications while other users talk</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while other users talk to you.while other users talkdum aliaj uzantoj parolasIf checked Mumble lowers the volume of other applications while you talk<b>Attenuate applications while you talk</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while you talk.while you talkdum vi parolasExclusive mode, not recommended.Ekskluziva reĝimo, ne rekomendita.<b>This opens the device in exclusive mode.</b><br />No other application will be able to use the device.ExclusiveEkskluziveIf checked Mumble lowers the volume of other users while you talk if you have the "Priority Speaker" status.If checked, Mumble will only attenuate applications that are using the same output source as Mumble<b>Attenuate only applications using the same output as Mumble</b><br />If checked, applications that use a different output than Mumble will not be attenuated.Only attenuate applications using the same output deviceIf checked, PulseAudio loopback modules will be attenuated<b>Attenuate PulseAudio loopback modules</b><br />If loopback modules are linked to Mumble's output device/sink, they will also be attenuated.Attenuate PulseAudio loopback modulesAudio output<b>This is the output method to use for audio.</b><b>Attenuate other users while talking as Priority Speaker</b><br />Mumble supports decreasing the volume of other users while you talk as the <i>Priority Speaker</i> to avoid getting disturbed. Checking this checkbox will enable this feature.Attenuate other users while talking as Priority SpeakerEnableAttenuationAudioOutputDialogNoneNeniuLocalLokeServerServiloAudio OutputSon-eligo%1 ms%1 ms%1 %%1 %%1 m%1 mOutput systemOutput deviceDefault jitter bufferVolume of incoming speechLaŭteco de venanta voĉoOutput delayAttenuation of other applications during speechAtenuo de aliaj aplikaĵoj dum paroladoMinimum distanceMaximum distanceMinimum volumeBloomDelay variancePacket lossPerditaj paketojLoopbackAudioOutputSampleChoose sound fileElektu sondosieronInvalid sound fileNevalida sondosieroThe file '%1' cannot be used by Mumble. Please select a file with a compatible format and encoding.AudioStats>1000 ms>1000ms>1000 msAudio StatisticsSonaj StatistikaĵojInput LevelsPeak microphone levelPeak power in last frameThis shows the peak power in the last frame (20 ms), and is the same measurement as you would usually find displayed as "input power". Please disregard this and look at <b>Microphone power</b> instead, which is much more steady and disregards outliers.Peak speaker levelThis shows the peak power of the speakers in the last frame (20 ms). Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you're playing audio from other programs, your setup is not working.This shows the peak power in the last frame (20 ms) of the speakers. Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you're playing audio from other programs, your setup is not working.Peak clean levelThis shows the peak power in the last frame (20 ms) after all processing. Ideally, this should be -96 dB when you're not talking. In reality, a sound studio should see -60 dB, and you should hopefully see somewhere around -20 dB. When you are talking, this should rise to somewhere between -5 and -10 dB.<br />If you are using echo cancellation, and this rises to more than -15 dB when you're not talking, your setup is not working, and you'll annoy other users with echoes.Signal AnalysisAnalizo de la signaloMicrophone powerMikrofonfortecoHow close the current input level is to idealThis shows how close your current input volume is to the ideal. To adjust your microphone level, open whatever program you use to adjust the recording volume, and look at the value here while talking.<br /><b>Talk loud, as you would when you're upset over getting fragged by a noob.</b><br />Adjust the volume until this value is close to 100%, but make sure it doesn't go above. If it does go above, you are likely to get clipping in parts of your speech, which will degrade sound quality.Signal-To-Noise ratioProporcio de signalo al bruoSignal-To-Noise ratio from the microphoneProporcio de signalo al bruo el la mikrofonoThis is the Signal-To-Noise Ratio (SNR) of the microphone in the last frame (20 ms). It shows how much clearer the voice is compared to the noise.<br />If this value is below 1.0, there's more noise than voice in the signal, and so quality is reduced.<br />There is no upper limit to this value, but don't expect to see much above 40-50 without a sound studio.Speech ProbabilityProbablo de ParoloProbability of speechProbablo de paroloThis is the probability that the last frame (20 ms) was speech and not environment noise.<br />Voice activity transmission depends on this being right. The trick with this is that the middle of a sentence is always detected as speech; the problem is the pauses between words and the start of speech. It's hard to distinguish a sigh from a word starting with 'h'.<br />If this is in bold font, it means Mumble is currently transmitting (if you're connected).Configuration feedbackCurrent audio bitrateAktuala sona bitrapidoBitrate of last frameBitrapido de la lasta sonaderoDoublePush intervalDuoblaPrema intertempoTime between last two Push-To-Talk pressesTempo inter la du lastaj premoj de Premi-por-ParoliSpeech DetectionRekono de ParoladoCurrent speech detection chanceAktuala ŝanco de rekono de parolado<b>This shows the current speech detection settings.</b><br />You can change the settings from the Settings dialog or from the Audio Wizard.Signal and noise power spectrumPower spectrum of input signal and noise estimateThis shows the power spectrum of the current input signal (red line) and the current noise estimate (filled blue).<br />All amplitudes are multiplied by 30 to show the interesting parts (how much more signal than noise is present in each waveband).<br />This is probably only of interest if you're trying to fine-tune noise conditions on your microphone. Under good conditions, there should be just a tiny flutter of blue at the bottom. If the blue is more than halfway up on the graph, you have a seriously noisy environment.Echo AnalysisAnalizo de eĥoWeights of the echo cancellerThis shows the weights of the echo canceller, with time increasing downwards and frequency increasing to the right.<br />Ideally, this should be black, indicating no echo exists at all. More commonly, you'll have one or more horizontal stripes of bluish color representing time delayed echo. You should be able to see the weights updated in real time.<br />Please note that as long as you have nothing to echo off, you won't see much useful data here. Play some music and things should stabilize. <br />You can choose to view the real or imaginary parts of the frequency-domain weights, or alternately the computed modulus and phase. The most useful of these will likely be modulus, which is the amplitude of the echo, and shows you how much of the outgoing signal is being removed at that time step. The other viewing modes are mostly useful to people who want to tune the echo cancellation algorithms.<br />Please note: If the entire image fluctuates massively while in modulus mode, the echo canceller fails to find any correlation whatsoever between the two input sources (speakers and microphone). Either you have a very long delay on the echo, or one of the input sources is configured wrong.This is the audio bitrate of the last compressed frame (20 ms), and as such will jump up and down as the VBR adjusts the quality. The peak bitrate can be adjusted in the Settings dialog.AudioWizardAudio Tuning WizardSon-agordi-asistantoIntroductionEnkondukoWelcome to the Mumble Audio WizardBonvenon al la son-asistanto de MumbleFinishedFinitaEnjoy using MumbleĜuu uzi na MumbleDevice selectionAprarat-elektoSelecting the input and output device to use with Mumble.This is the device your microphone is connected to.SystemSistemoInput method for audioDeviceAparatoInput device to use<b>Selects which sound card to use for audio input.</b>Cancel echo from headset or speakersUse echo cancellationThis enables echo cancellation of outgoing audio, which helps both on speakers and on headsets.This is the device your speakers or headphones are connected to.Output method for audioOutput device to use<b>Selects which sound card to use for audio Output.</b>Enable positional audioAllows positioning of soundAllows positioning of sound.Input DeviceEnig-aparatoOutput DeviceElig-aparatoThis allows Mumble to use positional audio to place voices.<p>
To keep latency to an absolute minimum, it's important to buffer as little audio as possible on the soundcard. However, many soundcards report that they require a much smaller buffer than what they can actually work with, so the only way to set this value is to try and fail.
</p>
<p>
You should hear a voice sample. Change the slider below to the lowest value which gives <b>no</b> interruptions or jitter in the sound. Please note that local echo is disabled during this test.
</p>
Amount of data to bufferKiom da datenoj por bufriThis sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn't cause rapid jitter in the sound.<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the blue and green but <b>not</b> the red zone while you speak.
</p>
Positional AudioPozicia SonoAdjusting attenuation of positional audio.Use headphones instead of speakersUzi kapaŭskultilojn anstataŭ laŭtparolilojn<p>
Congratulations. You should now be ready to enjoy a richer sound experience with Mumble.
</p>
<p>
Mumble is under continuous development, and the development team wants to focus on the features that benefit the most users. To this end, Mumble supports submitting anonymous statistics about your configuration to the developers. These statistics are essential for future development, and also make sure the features you use aren't deprecated.
</p>
Use headphonesUzi kapaŭskultilonThis ignores the OS speaker configuration and configures the positioning for headphones instead.Volume tuningTuning microphone hardware volume to optimal settings.Now talk softly, as you would when talking late at night and you don't want to disturb anyone. Adjust the slider below so that the bar moves into green when you talk, but stays blue while you're silent.Voice Activity DetectionLetting Mumble figure out when you're talking and when you're silent.This will help Mumble figure out when you are talking. The first step is selecting which data value to use.Raw amplitude from inputSignal-To-Noise ratioProporcio de signalo al bruoNext you need to adjust the following slider. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you're not talking, everything should be in the red (definitively not speech).Next you need to adjust the following two sliders. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you're not talking, everything should be in the red (definitively not speech).Device tuningChanging hardware output delays to their minimum value.Submit anonymous statistics to the Mumble projectPush To Talk:Premi Por Paroli:Quality & NotificationsAdjust quality and notification settings.Quality settingsLowMalaltaBalancedNotification settingsUse Text-To-Speech to read notifications and messages to you.Disable Text-To-Speech and use sounds instead.%1 ms%1 msEnables attenuation of other applications while users talk to youAttenuate applications while other users talkHighAltaCustomPropreYou already set a customized quality configuration in Mumble. Select this setting to keep it.Enables attenuation of other applications while users talk to you. This means that as soon someone starts to speak to you in Mumble, the sound of all other applications (like audio players) will get attenuated so you can hear them more clearly.Apply some high contrast optimizations for visually impaired usersUse high contrast graphicsKeep custom Text-To-Speech settings.<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but <b>not</b> the crisscrossed zone while you speak.
</p>
<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but <b>not</b> the criss-crossed zone while you speak.
</p>
For high contrast modeNow talk softly, as you would when talking late at night and you don't want to disturb anyone. Adjust the slider below so that the bar moves into empty zone when you talk, but stays in the striped one while you're silent.For high contrast modeNext you need to adjust the following slider. The first few utterances you say should end up in the empty area (definitive speech). While talking, you should stay inside the striped (might be speech) and when you're not talking, everything should be in the crisscrossed (definitively not speech).For high contrast modeIn this configuration Mumble will use a <b>low amount of bandwidth</b>. This will inevitably result in high latency and poor quality. Choose this only if your connection cannot handle the other settings. (16kbit/s, 60ms per packet)This is the <b>recommended default</b> configuration. It provides a good balance between quality, latency, and bandwidth usage. (40kbit/s, 20ms per packet)This configuration is only recommended for use in setups where bandwidth is not an issue, like a LAN. It provides the lowest latency supported by Mumble and <b>high quality</b>. (72kbit/s, 10ms per packet)<b>This is the input method to use for audio.</b><b>This is the Output method to use for audio.</b><html><head/><body><p>This is the audio tuning wizard for Mumble. This will help you correctly set the input levels of your sound card, and also set the correct parameters for sound processing in Mumble. </p><p>Please be aware that as long as this wizard is active, audio will be looped locally to allow you to listen to it, and no audio will be sent to the server. </p><p>Note that you can cancel this wizard at any time without it having an effect on your current audio systems. The settings are only once this wizard has been completed.</p></body></html><html><head/><body><p>Mumble supports positional audio for some games, and will position the voice of other users relative to their position in game. Depending on their position, the volume of the voice will be changed between the speakers to simulate the direction and distance the other user is at. Such positioning depends on your speaker configuration being correct in your operating system, so a test is done here. </p><p>The graph below shows the position of <span style=" color:#56b4e9;">you</span>, the <span style=" color:#d55e00;">speakers</span> and a <span style=" color:#009e73;">moving sound source</span> as if seen from above. You should hear the audio move between the channels. </p><p>You can also use your mouse to position the <span style=" color:#009e73;">sound source</span> manually.</p></body></html>Input systemInput deviceOutput systemOutput deviceOutput delayMaximum amplificationVAD levelPTT shortcutNo buttons assignedBanEditorMumble - Edit Bans&Address&Adreso&MaskReasonKialoStartEkiEndFinoUserUzantoHashHaketo&Add&Aldoni&UpdateĜ&isdatigi&Remove&ForigiBan ListSearch fieldSerĉ-kampoThis is the search field. Use it to find bans that have this username set in the username field.Who are you looking for?Kiun serĉas vi?No nicknameNeniu kromnomoIP addressIP adresoNo IP addressNeniu IP adresoReason for the banKialo por forbariNo reasonNeniu kialoBan end dateDato de la forbara finoBan end date. If you set the same date for start and end, the ban will be permanent (it will not expire).Certificate hashNo certificate hashBanned usersForbaritaj uzantojThis is a list with banned users.Use this button if you want to add a new ban.Use this button if you want to update ban information.Use this button if you want to remove user from the ban list.Clear all fieldsVakigi ĉiuj kampojnThis button clears all fields. Use it if you want to add a new ban.ClearVakigiBan List - %n Ban(s)SearchSerĉiIP AddressIP-adresoMaskStart date/timeEnd date/timeCertViewNameNomoEmailRetpoŝtoIssuerExpiry Date(none)(neniu)Self-signedMemsubskribitaCertWizardUnable to validate email.<br />Enter a valid (or blank) email to continue.There was an error generating your certificate.<br />Please try again.Your certificate and key could not be exported to PKCS#12 format. There might be an error in your certificate.The file could not be opened for writing. Please use another file.The file's permissions could not be set. No certificate and key has been written. Please use another file.The file could not be written successfully. Please use another file.The file could not be opened for reading. Please use another file.The file is empty or could not be read. Please use another file.The file did not contain a valid certificate and key. Please use another file.Select file to export certificate toSelect file to import certificate fromUnable to import. Missing password or incompatible file type.<b>Certificate Expiry:</b> Your certificate is about to expire. You need to renew it, or you will no longer be able to connect to servers you are registered on.Current certificateAktuala atestiloCertificate file to importCertificate passwordCertificate to importNew certificateNova atestiloFile to export certificate toEmail addressYour nameCertificatesCertificate ManagementAtestila AdministradoCertificate AuthenticationAtestila AŭtentigoAuthenticating to servers without using passwordsCurrent certificateAktuala atestiloThis is the certificate Mumble currently uses.Tiun atestilon Mumble aktuale uzas.Current CertificateAktuala atestiloCreate a new certificateKrei novan atestilonThis will create a new certificate.Tio kreos novan atestilon.Import certificate from fileEnporti atestilon de dosieroThis will import a certificate from file.Tio enportos atestilon de dosiero.Import a certificateEnporti atestilonExport CertificateElporti atestilonThis will export a certificate to file.Tio elportos atestilon de dosiero.Export current certificateElporti aktualan atestilonImport CertificateEnporti atestilonPKCS #12 Certificate importEnporto de atestilo de tipo PKCS #12<p>Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from Firefox, Internet Explorer, Opera etc.</p><p>If the file is password protected, you will need the password to import the certificate.</p><p>Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from FireFox, Internet Explorer, Opera etc.</p><p>If the file is password protected, you will need the password to import the certificate.</p>Import fromEnporti deFilename to import fromDosiernomo por enporti deThis is the filename you wish to import a certificate from.Select file to import fromElektu dosieron por enportiThis opens a file selection dialog to choose a file to import a certificate from.Open...Malfermi...PasswordpasvortoPassword for PKCS#12 filepasvorto por PKCS#12 dosieroThis is the password for the PKCS#12 file containing your certificate.Certificate to importThis is the certificate you are importing.Certificate DetailsDetaloj de la AtestiloReplace CertificateAnstataŭigi atestilonReplace existing certificate with new certificate?<p>You already have a certificate stored in Mumble, and you are about to replace it.</p>
<p>If you are upgrading to a certificate issued to you by a trusted CA and the email addresses match your current certificate, this is completely safe, and servers you connect to will automatically recognize the strong certificate for your email address.
</p>
<p>If this is not the case, you will no longer be recognized by any server you previously have authenticated with. If you haven't been registered on any server yet, this is nothing to worry about.
</p>
<p>
Are you sure you wish to replace your certificate?
</p>
This is the certificate Mumble currently uses. It will be replaced.Tiun atestilon Mumble aktuale uzas. Ĝi anstataŭiĝos.New certificateNova atestiloThis is the new certificate that will replace the old one.New CertificateNova AtestiloMake a backup of your certificateExport toElporti alFilename to export toThis is the filename you wish to export a certificate to.Save As...Konservi kiel...This is the certificate Mumble currently uses. It will be exported.Generate a new certificate for strong authenticationGeneri novan atestilon por forta aŭtentigo<p>Mumble will now generate a strong certificate for authentication to servers.</p><p>If you wish, you may provide some additional information to be stored in the certificate, which will be presented to servers when you connect. If you provide a valid email address, you can upgrade to a CA issued email certificate later on, which provides strong identification.</p>NameNomoEmailRetpoŝtoYour email address (e.g. johndoe@mumble.info)This is your email address. It is strongly recommended to provide a valid email address, as this will allow you to upgrade to a strong certificate without authentication problems.Your name (e.g. John Doe)Via nomo (ekz. John Doe)This is your name, and will be filled out in the certificate. This field is entirely optional.FinishFiniCertificate-based authentication is ready for useEnjoy using Mumble with strong authentication.Automatic certificate creationAŭtomata kreo de atestilo<p>If you ever lose your current certificate, which will happen if your computer suffers a hardware failure or you reinstall your machine, you will no longer be able to authenticate to any server you are registered on. It is therefore <b>mandatory</b> that you make a backup of your certificate. We strongly recommend you store this backup on removable storage, such as a USB flash drive.</p>
<p>Note that this file will not be encrypted, and if anyone gains access to it, they will be able to impersonate you, so take good care of it.</p><p>Mumble can use certificates to authenticate with servers. Using certificates avoids passwords, meaning you don't need to disclose any password to the remote site. It also enables very easy user registration and a client side friends list independent of servers.</p><p>While Mumble can work without certificates, the majority of servers will expect you to have one.</p><p>Creating a new certificate automatically is sufficient for most use cases. But Mumble also supports certificates representing trust in the users ownership of an email address. These certificates are issued by third parties. For more information see our <a href="http://mumble.info/certificate.php">user certificate documentation</a>. </p>ChanACLNoneNeniuTraverseTrairiEnterEniriSpeakParoliMute/DeafenMutigi/SurdigiMake channelFari kanalonMake temporaryDumtempigiLink channelLigi kanalonThis represents no privileges.This represents total access to the channel, including the ability to change group and ACL information. This privilege implies all other privileges.This represents the permission to traverse the channel. If a user is denied this privilege, he will be unable to access this channel and any sub-channels in any way, regardless of other permissions in the sub-channels.This represents the permission to join the channel. If you have a hierarchical channel structure, you might want to give everyone Traverse, but restrict Enter in the root of your hierarchy.This represents the permission to speak in a channel. Users without this privilege will be suppressed by the server (seen as muted), and will be unable to speak until they are unmuted by someone with the appropriate privileges.This represents the permission to whisper to this channel from the outside. This works exactly like the <i>speak</i> privilege, but applies to packets spoken with the Whisper key held down. This may be used to broadcast to a hierarchy of channels without linking.This represents the permission to mute and deafen other users. Once muted, a user will stay muted until he is unmuted by another privileged user or reconnects to the server.This represents the permission to move a user to another channel or kick him from the server. To actually move the user, either the moving user must have Move privileges in the destination channel, or the user must normally be allowed to enter the channel. Users with this privilege can move users into channels the target user normally wouldn't have permission to enter.This represents the permission to make sub-channels. The user making the sub-channel will be added to the admin group of the sub-channel.This represents the permission to make a temporary subchannel. The user making the sub-channel will be added to the admin group of the sub-channel. Temporary channels are not stored and disappear when the last user leaves.This represents the permission to link channels. Users in linked channels hear each other, as long as the speaking user has the <i>speak</i> privilege in the channel of the listener. You need the link privilege in both channels to create a link, but just in either channel to remove it.This represents the permission to write text messages to other users in this channel.This represents the permission to forcibly remove users from the server.This represents the permission to permanently remove users from the server.This represents the permission to register and unregister users on the server.This represents the permission to register oneself on the server.WhisperFlustriMoveMoviText messageTekst-mesaĝoKickForpeliBanForbariRegister UserRegistrigi UzantonRegister SelfRegistriĝiWrite ACLThis represents the permission to use the listen-feature allowing to listen to a channel without being in it.ListenThis represents the permission to reset the comment or avatar of a user.Reset User ContentChatbarTextEditPaste and &SendPaste and sendAlglui kaj &Sendi<center>Type chat message here</center><center>Tajpu babilmesaĝon ĉi tie</center>Unable to send image: too large.Unable to send image %1: too large.This server does not allow sending images.ClientUserFriendAmikoAuthenticatedAŭtentigitaPriority speakerRecordingMuted (server)Mutigite (servilo)Deafened (server)Surdigite (servilo)Local Ignore (Text messages)Loke Ignori (Tekstmesaĝojn)Local MuteLoke MutigiMuted (self)Mutigite (mem)Deafened (self)Surdigite (mem)Local Ignore (Text-To-Speech)ConfigDialogAccept changesAkcepti ŝanĝojnThis button will accept current settings and return to the application.<br />The settings will be stored to disk when you leave the application.Reject changesRifuzi ŝanĝojnThis button will reject all changes and return to the application.<br />The settings will be reset to the previous positions.Apply changesApliki ŝanĝojnThis button will immediately apply all changes.Undo changes for current pageThis button will revert any changes done on the current page to the most recent applied settings.Restore defaults for current pageMumble ConfigurationAgordo de MumbleConfiguration categoriesThis button will restore the defaults for the settings on the current page. Other pages will not be changed.<br />To restore all settings to their defaults, you can press the "Defaults (All)" button.Restore all defaultsThis button will restore the defaults for all settings.Defaults (All)ConnectDialogConnecting to %1Konektante al %1Enter usernameenigi uzantonomonServernameServilnomoUnknownUsersUzantojFailed to fetch server listMumble Server ConnectPingEĥosondoRemove from FavoritesForigi de FavoratojAdd custom serverAldoni propran servilon&Copy&KopiiCopy favorite link to clipboardKopii favoratan ligilon al tondujo&Paste&GluiPaste favorite from clipboardAlglui favoraton de tondujo&Edit...%Redakti&Add New...&Aldoni novan...Add to &FavoritesAldoni al FavoratojOpen &WebpageMalfermi RetpaĝonServer listSearchSerĉiLocationFilterFiltriShow AllShow PopulatedShow ReachableAllĈiujAfricaAsiaEuropeNorth AmericaOceaniaSouth AmericaConsent to the transmission of private data<p>To measure the latency (ping) of public servers and determine the number of active users, your IP address must be transmitted to each public server.</p><p>Do you consent to the transmission of your IP address? If you answer no, the public server list will be deactivated. However, you can reactivate it at any time in the network settings.</p>C&onnect&KonektiAdding host %1Aldonante gastigan komputilon %1HostnameNomo de gastiga komputiloBonjour nameBonjour-nomoPortPordoAddressesAdresojWebsiteRetejoPacket lossPerditaj paketojPing (80%)Eĥosondo (80%)%1 ms%1 msPing (95%)Eĥosondo (95%)BandwidthKapacito%1 kbit/s%1 kbitoj/sVersionVersioConnectDialogEditEdit ServerRedakti ServilonName of the serverNomo de la serviloA&ddressA&dresoInternet address of the server.Internet address of the server. Retadreso de la servilo.<b>Address</b><br/>
Internet address of the server. This can be a normal hostname, an IPv4/IPv6 address or a Bonjour service identifier. Bonjour service identifiers have to be prefixed with a '@' to be recognized by Mumble.<b>Address</b></br>
Internet address of the server. This can be a normal hostname, an ipv4/6 address or a bonjour service identifier. Bonjour service identifiers have to be prefixed with a '@' to be recognized by Mumble.&Port&PordoPort on which the server is listening<b>Port</b><br/>
Port on which the server is listening. If the server is identified by a Bonjour service identifier this field will be ignored.&Username&UzantnomoUsername to send to the serverLa uzantnomo por sendi al la servilo<b>Username</b><br/>
Username to send to the server. Be aware that the server can impose restrictions on how a username might look like. Also your username could already be taken by another user.<b>Uzantnomo</b><br/>
La uzantnomo por sendi al la servilo. Konsciu ke la servilo povas trudi limigojn pri kiel uzantnomo povas aspekti. Krome via uzantnomo jam povas esti uzata de alia uzanto.LabelEtikedoAdd ServerAldoni ServilonYou are currently connected to a server.
Do you want to fill the dialog with the connection data of this server?
Host: %1 Port: %2You have an URL in your clipboard.
Do you want to fill the dialog with this data?
Host: %1 Port: %2PasswordPasvortoPassword to send to the serverLa pasvorto por sendi al la servilo<b>Password</b><br/>
Password to be sent to the server on connect. This password is needed when connecting as <i>SuperUser</i> or to a server using password authentication. If not entered here the password will be queried on connect.<b>Pasvorto</b><br/>
La pasvorto por sendi al la servilo ekkonekte. La pasvorto nepras, kiam oni konektas kiel <i>SuperUser<i> aŭ al servilo, kiu uzas perpasvortan aŭtentigon. Se la pasvorto ne estas enigita, ĝi estos petata ekkonekte.Show passwordMontri pasvorton<b>Label</b><br/>
Label of the server. This is what the server will be named like in your server list and can be chosen freely.Local server labelLoka servil-etikedo127.0.0.1127.0.0.16473864738Your usernameVia uzantnomoYour passwordVia pasvorto&Fill&IgnoreCrashReporterMumble Crash Report<p><b>We're terribly sorry, but it seems Mumble has crashed. Do you want to send a crash report to the Mumble developers?</b></p><p>The crash report contains a partial copy of Mumble's memory at the time it crashed, and will help the developers fix the problem.</p>Email address (optional)Retpoŝtadreso (malnepra)Please describe briefly, in English, what you were doing at the time of the crashPlease briefly describe what you were doing at the time of the crashBonvolu priskribi koncize en la angla, kion vi faris kiam la kraŝo okazisSend ReportSendi la RaportonDon't send reportNe sendi la raportonCrash upload successfulThank you for helping make Mumble better!Crash upload failedUploading crash reportAbort uploadĈesigi la alŝutonHTTP error %1: "%2"Internal error encountered in CrashReporter.cpp: Received network reply does not contain an HTTP status code. Please inform a developer about error code %1DatabaseThe database '%1' is read-only. Mumble cannot store server settings (i.e. SSL certificates) until you fix this problem.The database '%1' is read-only. Mumble can not store server settings (ie. SSL certificates) until you fix this problem.The database file '%1' set in the configuration file does not exist. Do you want to create a new database file at this location?Mumble failed to initialize a database in any of the possible locations.DeveloperConsoleDeveloper ConsoleDockTitleBarDrag hereGlobalShortcutShortcutsFulmoklavojList of configured shortcutsListo da agorditaj fulmoklavojFunctionFunkcioDataDatenojShortcutFulmoklavoSuppressAdd new shortcutAldoni novan fulmoklavonThis will add a new global shortcutTio aldonos novan mallokan fulmoklavon&Add&AldoniRemove selected shortcutForigi la elektitan fulmoklavonThis will permanently remove a selected shortcut.Tio daŭre forigi elektitan fulmoklavon.&Remove&Forigi<html><head/><body><p>Mumble can currently only use mouse buttons and keyboard modifier keys (Alt, Ctrl, Cmd, etc.) for global shortcuts.</p><p>If you want more flexibility, you can enable <span style=" font-style:italic;">Access for assistive devices</span> in the system's Accessibility preferences. However, please note that this change also potentially allows malicious programs to read what is typed on your keyboard.</p></body></html>Open Accessibility PreferencesSkipPreterpasiEnable Global ShortcutsEbligi Mallokajn Fulmoklavojn<b>Additional Shortcut Engines</b><br />This section allows you to configure the use of additional GlobalShortcut engines.Additional Shortcut Engines<b>Enable Windows hooks</b>.<br />This enables the Windows hooks shortcut engine. Using this engine allows Mumble to suppress keypresses and mouse clicks.Enable Windows hooks<b>Enable GKey</b>.<br />This setting enables support for the GKey shortcut engine, for "G"-keys found on Logitech keyboards.Enable GKey<b>Enable XInput</b><br />This setting enables support for the XInput shortcut engine, for Xbox compatible controllers.Enable XInput<b>Enable shortcuts in privileged applications</b>.<br />Also known as "UIAccess". This allows Mumble to receive global shortcut events from programs running at high privilege levels, such as an Admin Command Prompt or older games that run with admin privileges.
<br /><br />
Without this option enabled, using Mumble's global shortcuts in privileged applications will not work. This can seem inconsistent: for example, if the Push-to-Talk button is pressed in a non-privileged program, but released in a privileged application, Mumble will not observe that it has been released and you will continue to talk until you press the Push-to-Talk button again.Enable shortcuts in privileged applicationsGlobalShortcutButtonsEdit shortcutStart capture process<html><head/><body><p>Starts the capture process: all buttons you press will be added to the tree.</p><p>Once all buttons are released, the capture process stops automatically.</p></body></html>AddAldoniRemove the currently selected itemsRemoveForigiGlobalShortcutConfig<html><head/><body><p>Mumble can currently only use mouse buttons and keyboard modifier keys (Alt, Ctrl, Cmd, etc.) for global shortcuts.</p><p>If you want more flexibility, you can add Mumble as a trusted accessibility program in the Security & Privacy section of your Mac's System Preferences.</p><p>In the Security & Privacy preference pane, change to the Privacy tab. Then choose Accessibility (near the bottom) in the list to the left. Finally, add Mumble to the list of trusted accessibility programs.</body></html>ShortcutsFulmoklavoj<b>This is the global shortcut key combination.</b><br />Click this field and then press the desired key/button combo to rebind. Double-click to clear.<b>This is the global shortcut key combination.</b><br />Double-click this field and then the desired key/button combo to rebind.Suppress keys from other applications<b>This hides the button presses from other applications.</b><br />Enabling this will hide the button (or the last button of a multi-button combo) from other applications. Note that not all buttons can be suppressed.Configured shortcutsGlobalShortcutEngineUnknownGlobalShortcutMacMouseKeyboardGlobalShortcutTargetWhisper TargetFlustro-celoChannel TargetRestrict to GroupIf specified, only members of this group will receive the whisper.List of usersListo da uzantojAddAldoniRemoveForigiModifiersModifilojDo not send positional audio information when using this whisper shortcut.Ignore positional audioIgnori pozician sononShout to Linked channelsShout to subchannelsThe whisper will also be transmitted to linked channels.The whisper will also be sent to the subchannels of the channel target.Shout/Whisper to:Current selectionWhen shouting to channel:Shout to linked channelsChannelKanaloGlobalShortcutWinMouseKeyboardGlobalShortcutXKeyboardMouseJackAudioSystemHardware PortsMonoStereoLCDNot connectedNekonektiteLCDConfigEnable this deviceEbligi ĉi tiun aparatonLCDLCDDevicesAparatojNameNomo<p>This is the list of available LCD devices on your system. It lists devices by name, but also includes the size of the display. Mumble supports outputting to several LCD devices at a time.</p>
<h3>Size:</h3>
<p>
This field describes the size of an LCD device. The size is given either in pixels (for Graphic LCDs) or in characters (for Character LCDs).</p>
<h3>Enabled:</h3>
<p>This decides whether Mumble should draw to a particular LCD device.</p>SizeGrandoEnabledEnŝaltiteViewsMinimum Column WidthMinimuma Kolumnolarĝo<p>This option decides the minimum width a column in the User View.</p>
<p>If too many people are speaking at once, the User View will split itself into columns. You can use this option to pick a compromise between number of users shown on the LCD, and width of user names.</p>
This setting decides the width of column splitter.Splitter WidthMinimum column widthSplitter widthListenerLocalVolumeDialogAdjusting local volume for listening to %1LogDebugSencimigaCriticalGravaWarningAvertoInformationInformojOther self-muted/deafenedAliulo sin mutigis/surdigisUser recording state changedUser kicked (you or by you)User kickedYou self-mutedVi vin mutigisUser muted (you)Uzanto mutiĝis (vi)User muted (by you)Uzanto mutiĝis (de vi)User muted (other)Uzanto mutiĝis (aliulo)You self-unmutedVi vin malmutigisYou self-deafenedVi vin surdigisYou self-undeafenedVi vin malsurdigisUser renamedUzanto renomiĝisUser connected and entered channelUser left channel and disconnectedPrivate text messagethe serverla servilo[[ Invalid size ]][[ Text object too large to display ]][[ Teksta objekto tro grandas por montri ]][Date changed to %1]
[La dato ŝanĝis al %1]
link to %1ligilo al %1FTP link to %1player linkchannel linkkanal-ligilo%1 link%1 ligiloServer connectedServer disconnectedUser joined serverUser left serverUser joined channelUser left channelPermission deniedText messageTekst-mesaĝoYou joined channelYou joined channel (moved)User started listening to channelUser stopped listening to channelPlugin messageLogConfigToggle console for %1 eventsToggle pop-up notifications for %1 eventsToggle Text-To-Speech for %1 eventsClick here to toggle sound notification for %1 eventsToggle window highlight (if not active) for %1 eventsPath to sound file used for sound notifications in the case of %1 events<br />Single click to play<br />Double-click to changeClick here to toggle console output for %1 events.<br />If checked, this option makes Mumble output all %1 events in its message log.Click here to toggle pop-up notifications for %1 events.<br />If checked, a notification pop-up will be created by Mumble for every %1 event.Click here to toggle pop-up notifications for %1 events.<br />If checked, a notification pop-up will be created by mumble for every %1 event.Click here to toggle window highlight for %1 events.<br />If checked, Mumble's window will be highlighted for every %1 event, if not active.Path to sound file used for sound notifications in the case of %1 events.<br />Single click to play<br />Double-click to change<br />Ensure that sound notifications for these events are enabled or this field will not have any effect.Click here to toggle Text-To-Speech for %1 events.<br />If checked, Mumble uses Text-To-Speech to read %1 events out loud to you. Text-To-Speech is also able to read the contents of the event which is not true for sound files. Text-To-Speech and sound files cannot be used at the same time.Click here to toggle sound notification for %1 events.<br />If checked, Mumble uses a soundfile predefined by you to indicate %1 events. Soundfiles and Text-To-Speech cannot be used at the same time.Click here to toggle sound notification for %1 events.<br />If checked, Mumble uses a sound file predefined by you to indicate %1 events. Sound files and Text-To-Speech cannot be used at the same time.Path to soundfile used for sound notifications in the case of %1 events.<br />Single click to play<br />Doubleclick to change<br />Be sure that sound notifications for these events are enabled or this field will not have any effect.MessagesMesaĝojMessageMesaĝoConsoleKonzoloNotificationText-To-SpeechSoundfileSon-dosieroPathVojoText To SpeechVolumeLaŭtecoVolume of Text-To-Speech Engine<b>This is the volume used for the speech synthesis.</b>Length thresholdMessage length threshold for Text-To-Speech Engine<b>This is the length threshold used for the Text-To-Speech Engine.</b><br />Messages longer than this limit will not be read aloud in their full length. CharactersWhisperFlustroIf checked you will only hear whispers from users you added to your friend list.Only accept whispers from friendsIf enabled text messages you send will be read back to you with TTSRead back own messagesChat LogBabil-protokoloMaximum chat lengthMaksimuma babil-longoUnlimitedNelimigite LinesLiniojHighlightIf enabled, TTS will not dictate the message scope.Omit Message ScopeIf enabled, TTS will not dictate the message author.Omit Message AuthorIf checked the time at the beginning of a message will be displayed in the 24-hour format.
The setting only applies for new messages, the already shown ones will retain the previous time format.Use 24-hour clockHow far individual messages are spaced out from one another.Message marginsLog messagesTTS engine volumeChat message marginsLookConfigSystem defaultSistema defaŭltoNoneNeniuOnly with usersNur kun uzantojAllĈiujAskDemandiDo NothingFari nenionMoveMovi<a href="%1">Browse</a>This link is located next to the theme heading in the ui config and opens the user theme directoryUser InterfaceUzanto-interfacoThis sets which channels to automatically expand. <i>None</i> and <i>All</i> will expand no or all channels, while <i>Only with users</i> will expand and collapse channels as users join and leave them.List users above subchannels (requires restart).<b>If set, users will be shown above subchannels in the channel view.</b><br />A restart of Mumble is required to see the change.Users above ChannelsUzantoj supre de la Kanaloj<b>If set, will verify you want to quit if connected.</b><b>Se agordata, kontrolos ke vi volas ĉesi se estos konektita.</b>Show number of users in each channelMontri nombron da uzantoj en ĉiu kanaloShow channel user countMontri nombron da uzantoj en la kanaloLanguageLingvoLanguage to use (requires restart)Lingvo por uzi (relanĉo nepras)<b>This sets which language Mumble should use.</b><br />You have to restart Mumble to use the new language.Look and FeelLayoutAranĝoClassicKlasikaStackedHybridCustomPropreThis changes the behavior when moving channels.This sets the behavior of channel drags; it can be used to prevent accidental dragging. <i>Move</i> moves the channel without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the channel.This sets the behavior of channel drags; it can be used to prevent accidental dragging. <i>Move Channel</i> moves the channel without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the channel.ExpandEtendiWhen to automatically expand channelsChannel DraggingAsk whether to close or minimize when quitting Mumble.Ask on quit while connectedAlways On Top<b>If set, minimizing the Mumble main window will cause it to be hidden and accessible only from the tray. Otherwise, it will be minimized as a window normally would.</b>Hide in tray when minimizedHide the main Mumble window in the tray when it is minimized.This setting controls when the application will be always on top.NeverNeniamAlwaysĈiamIn minimal viewIn normal viewDisplays talking status in system trayShow talking status in tray iconThis setting controls in which situations the application will stay always on top. If you select <i>Never</i> the application will not stay on top. <i>Always</i> will always keep the application on top. <i>In minimal view</i> / <i>In normal view</i> will only keep the application always on top when minimal view is activated / deactivated.Show context menu in menu barApply some high contrast optimizations for visually impaired usersOptimize for high contrastApplicationAplikaĵoAdds user and channel context menus into the menu barTray IconChannel TreeUse selected item as the chat bar targetFilter automatically hides empty channelsShow transmit mode dropdown in toolbarThemeTheme to use to style the user interface<b>Configures which theme the Mumble user interface should be styled with</b><br />Mumble will pick up themes from certain directories and display them in this list. The one you select will be used to customize the visual appearance of Mumble. This includes colors, icons and more.User DraggingThis changes the behavior when moving users.This sets the behavior of user drags; it can be used to prevent accidental dragging. <i>Move</i> moves the user without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the user.<b>Enable Developer menu</b><br />This enables the "Developer"-menu in Mumble. This menu is used for developer-specific features, such as the Developer Console.Enable Developer menuWhen in custom layout mode, checking this disables rearranging.Lock layoutTalking UIA user that is silent for the given amount of seconds will be removed from the Talkin UI.Remove silent user afterIf this is checked, the local user (yourself) will always be visible in the TalkingUI (regardless of talking state).Always keep local user visibleHow many characters from the original name to display at the beginning of an abbreviated name.String to separate a channel name from its parent's.Channel separatorAbbreviated prefix charactersThe names of how many parent channels should be included in the channel's name when displaying it in the TalkingUI?How many characters from the original name to display at the end of an abbreviated name.Abbreviated postfix charactersWhether to also allow abbreviating the current channel of a user (instead of only its parent channels).Abbreviate current channel nameChannel hierarchy depthAbbreviation replacementWhether the channel (hierarchy) name should be abbreviated, if it exceeds the specified maximum length.Abbreviate channel namesThe preferred maximum length of a channel (hierarchy) name in the Talking UI. Note that this is not a hard limit though.Max. channel name lengthRelative font size to use in the Talking UI in percent.Rel. font size (%)String that gets used instead of the cut-out part of an abbreviated name.Prefix character countPostfix character countMaximum name lengthRelative font sizeAlways on topChannel draggingAutomatically expand channels whenUser dragging behaviorSilent user lifetimeShow the local volume adjustment for each user (if any).Show volume adjustmentsWhether to show all of the local user's listeners (ears) in the TalkingUI (and thereby also the channels they are in). Show local user's listeners (ears)Hide the username for each user if they have a nickname.Show nicknames onlyMainWindowRootRadikoPush-to-TalkGlobal ShortcutPremi-por-ParoliPush and hold this button to send voice.Global ShortcutPremadi ĉi tiun butonon por sendadi voĉon.This configures the push-to-talk button, and as long as you hold this button down, you will transmit voice.Global ShortcutReset Audio ProcessorGlobal ShortcutUnlink PluginGlobal ShortcutPush-to-MuteGlobal ShortcutJoin ChannelGlobal ShortcutToggle OverlayGlobal ShortcutToggle state of in-game overlay.Global ShortcutToggle MinimalGlobal ShortcutVolume Up (+10%)Global ShortcutVolume Down (-10%)Global ShortcutMumbleMumbleMumble -- %1Mumble -- %1&WindowMinimizeCtrl+MCtrl+MCloseFermiMumble is currently connected to a server. Do you want to Close or Minimize it?Mute SelfGlobal ShortcutSet self-mute status.Global ShortcutThis will set or toggle your muted status. If you turn this off, you will also disable self-deafen.Global ShortcutDeafen SelfGlobal ShortcutSet self-deafen status.Global ShortcutThis will set or toggle your deafened status. If you turn this on, you will also enable self-mute.Global ShortcutWhisper/ShoutWhisper<center>Not connected</center>Not connectedClearVakigiOpening URL %1File does not existFile is not a configuration file.Settings merged from file.URL scheme is not 'mumble'This version of Mumble can't handle URLs for Mumble version %1.%2.%3Connecting to %1Konektante al %1Enter usernameEnigu uzantonomonConnecting to server %1.Konektante al servilo %1.Reconnecting.Rekonektante.Transmit Mode set to ContinuousRegister yourself as %1Registrigi vin kiel %1<p>You are about to register yourself on this server. This action cannot be undone, and your username cannot be changed once this is done. You will forever be known as '%1' on this server.</p><p>Are you sure you want to register yourself?</p>Register user %1Registrigi uzanton %1<p>You are about to register %1 on the server. This action cannot be undone, the username cannot be changed, and as a registered user, %1 will have access to the server even if you change the server password.</p><p>From this point on, %1 will be authenticated with the certificate currently in use.</p><p>Are you sure you want to register %1?</p>Kicking user %1Banning user %1View comment on user %1Vidi komenton de uzanto %1Message to channel %1Mesaĝo por la kanalo %1Connected.Konektite.<li>Expected certificate digest (SHA-1): %1</li>Server presented a certificate which failed verification.<p>%1</p><ul>%2</ul><p>The specific errors with this certificate are:</p><ol>%3</ol><p>Do you wish to accept this certificate anyway?<br />(It will also be stored so you won't be asked this again.)</p>SSL Version mismatchServer connection failed.<center>Type message to channel '%1' here</center>Type message to channel '%1' here<center>Tajpu mesaĝon por la kanalo '%1' ĉi tie</center><center>Type message to user '%1' here</center>Type message to user '%1' here<center>Tajpu mesaĝon por la uzanto '%1' ĉi tie</center>Choose image fileElektu bildodosieronFailed to load imageMalsukcesis ŝargi la bildonCould not open file for reading.Ne povas malfermi la dosieron por legi.Image format not recognized.Ne rekonis bildformaton.&User&Uzanto&Channel&KanaloUse in conjunction with Whisper to.Global ShortcutThis will switch the states of the in-game overlay.Global ShortcutLink ChannelGlobal ShortcutCycle Transmit ModeGlobal ShortcutSet Transmit Mode to Push-To-TalkGlobal ShortcutSet Transmit Mode to ContinuousGlobal ShortcutSet Transmit Mode to VADGlobal ShortcutSend Text MessageGlobal ShortcutSend Clipboard Text MessageGlobal ShortcutThis will send your Clipboard content to the channel you are currently in.Global ShortcutContinuousVoice ActivityPush-to-TalkPremi-por-ParoliMumble - Minimal View -- %1CancelNuligiSave Image As...Save Image FileCould not save image: %1Change your commentTransmit Mode set to Voice ActivityTransmit Mode set to Push-to-Talk&View CertificateEnter reasonEnigu kialonSending message to %1Sendi mesaĝion al %1To %1: %2Al %1: %2Message to %1Mesaĝo al %1Are you sure you want to reset the comment of user %1?Are you sure you want to reset the avatar of user %1?Ĉu vi certas, ke vi volas rekomencigi la avataron de uzanto %1?Are you sure you want to delete %1 and all its sub-channels?Sending message to channel %1Message to tree %1To %1 (Tree): %2(Tree) %1: %2Unmuted and undeafened.Malmutigite kaj malsurdigite.Unmuted.Malmutigite.Muted.Mutigite.Muted and deafened.Mutigite kaj surdigite.Deafened.Surdigite.Undeafened.MalsurdigiteRestart Mumble?Some settings will only apply after a restart of Mumble. Restart Mumble now?About QtPri QtSSL Verification failed: %1<li>Server certificate digest (SHA-1): %1</li><b>WARNING:</b> The server presented a certificate that was different from the stored one.This server is using an older encryption standard, and is no longer supported by modern versions of Mumble.Server connection failed: %1.Servila konekto malsukcesis: %1.Disconnected from server.Invalid usernameNevalida uzantonomoYou connected with an invalid username, please try another one.Username in useUzantnomo estas uzataThat username is already in use, please try another username.Tiu uzantnomo jam estas uzata, bonvolu provi alian uzantnomon.Wrong certificate or passwordWrong certificate or password for registered user. If you are
certain this user is protected by a password please retry.
Otherwise abort and check your certificate and username.Wrong passwordmalĝusta pasvortoWrong server password for unregistered user account, please try again.Images (*.png *.jpg *.jpeg)Bildoj (*.png *.jpg *.jpeg)C&onfigureAg&ordi&Help&HelpoLogThis shows all recent activity. Connecting to servers, errors and information messages all show up here.<br />To configure exactly which messages show up here, use the <b>Settings</b> command from the menu.&Quit Mumble&Ĉesi na MumbleCloses the programExits the application.Eliras la aplikaĵon.Ctrl+QCtrl+QOpen the server connection dialog&Disconnect&MalkonektiDisconnect from serverDisconnects you from the server.Show information about the server connectionThis will show extended information about the connection to the server.&MuteMutigi&DeafenSurdigi&Local MuteLoke MutigiSend a Text MessageSendi tekst-mesaĝonSends a text message to another user.Sendas tekst-mesaĝon al alia uzanto.Add new channelAldoni novan kanalonThis adds a new sub-channel to the currently selected channel.Remove channelForigi kanalonThis removes a channel and all sub-channels.Edit Groups and ACL for channelThis opens the Group and ACL dialog for the channel, to control permissions.&LinkLink your channel to another channelThis is the chatbar<br />If you enter text here and then press enter the text is sent to the user or channel that was selected. If nothing is selected the message is sent to your current channel.ChatbarShows a dialog of registered servers, and also allows quick-connect.Montras dialogon de registritaj serviloj, kaj ankaŭ permesas tujkonekti.Kick user (with reason)Kick selected user off server. You'll be asked to specify a reason.Mute userMutigi uzantonMute or unmute user on server. Unmuting a deafened user will also undeafen them.Mutigi aŭ malmutigi uzanton servile. Malmutigi surdan uzanton ankaŭ malsurdigos ĝin.Kick and ban user (with reason)Kick and ban selected user from server. You'll be asked to specify a reason.Deafen userSurdigi uzantonDeafen or undeafen user on server. Deafening a user will also mute them.Surdigi aŭ malsurdigi uzanton servile. Surdigi uzanton ankaŭ mutigos ĝin.Mute user locallyLoke mutigi uzantonMute or unmute user locally. Use this on other users in the same room.This links your current channel to the selected channel. If users in a channel have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.This links your current channel to the selected channel. If they have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.&UnlinkChannelUnlink your channel from another channelThis unlinks your current channel from the selected channel.Unlinks your channel from all linked channels.This unlinks your current channel (not the selected one) from all linked channels.&ResetReset audio preprocessorThis will reset the audio preprocessor, including noise cancellation, automatic gain and voice activity detection. If something suddenly worsens the audio environment (like dropping the microphone) and it was temporary, use this to avoid having to wait for the preprocessor to readjust.&Mute SelfMute yourselfMutigi vinMute or unmute yourself. When muted, you will not send any data to the server. Unmuting while deafened will also undeafen.&Deafen SelfDeafen yourselfSurdigi vinDeafen or undeafen yourself. When deafened, you will not hear anything. Deafening yourself will also mute.&Text-To-SpeechToggle Text-To-SpeechEnable or disable the text-to-speech engine. Only messages enabled for TTS in the Configuration dialog will actually be spoken.Display audio statisticsPops up a small dialog with information about your current audio input.Forcibly unlink pluginThis forces the current plugin to unlink, which is handy if it is reading completely wrong data.Configure MumbleAllows you to change most settings for Mumble.Start the audio configuration wizardThis will guide you through the process of configuring your audio hardware.&What's This?Enter What's This? modeClick this to enter "What's This?" mode. Your cursor will turn into a question mark. Click on any button, menu choice or area to show a description of what it is.Information about MumbleInformoj pri MumbleShows a small dialog with information and license for Mumble.Information about SpeexShows a small dialog with information about Speex.Information about QtInformoj pri QtShows a small dialog with information about Qt.Check for &UpdatesCheck for new version of MumbleConnects to the Mumble webpage to check if a new version is available, and notifies you with an appropriate download URL if this is the case.Sends a text message to all users in a channel.Configure certificates for strong authenticationThis starts the wizard for creating, importing and exporting certificates for authentication against servers.Register user on serverRegistrigi uzanton en la servilonThis will permanently register the user on the server.Add &FriendAldoni &amikonAdds a user as your friend.Aldonas uzanton kiel via amiko.This will add the user as a friend, so you can recognize him on this and other servers.&Remove Friend&Forigi &amikonRemoves a user from your friends.Forigas uzanton de via amikoj.This will remove a user from your friends list.&Update FriendĜisdatigi AmikonUpdate name of your friend.Ĝisdatigi la nomon de via amiko.Your friend uses a different name than what is in your database. This will update the name.Edit registered users listRedakti liston da registritaj uzantojThis opens the editor for registered users, which allow you to change their name or unregister them.Add or remove text-based access tokens&Minimal ViewPlejeta VidoToggle minimal window modesThis will toggle minimal mode, where the log window and menu is hidden.You muted and deafened %1.Vi mutigis kaj surdigis na %1.You unmuted and undeafened %1.Vi malmutigis kaj malsurdigis na %1.You undeafened %1.Vi malsurdigis na %1.You suppressed %1.%1 muted and deafened by %2.%1 mutiĝis kaj surdiĝis de %2.%1 unmuted and undeafened by %2.%1 malmutiĝis kaj malsurdiĝis de %2.%1 undeafened by %2.%1 malsurdiĝis de %2.%1 suppressed by %2.%1 moved to %2.%1 moviĝis al %2.%1 moved to %2 by %3.%1 moviĝis al %2 de %3.%1 moved in from %2 by %3.%1 enmoviĝis el %2 de %3.%1 is now muted and deafened.%1 nun estas muta kaj surda.Your account information can not be verified currently. Please try again laterWelcome message: %1Bonvenmesaĝo: %1Mumble: %1Mumble: %1You were denied %1 privileges in %2.%3 was denied %1 privileges in %2.Denied: Cannot modify SuperUser.Malpermesis: Ne povas modifi la uzanton SuperUser.Denied: Invalid channel name.Malpermesis: Nevalida kanal-nomo.Denied: Text message too long.Malpermesis: Teksta mesaĝo tro longas.Denied: Operation not permitted in temporary channel.Malpermesis: Operacio ne estas permesata en provizora kanalo.You need a certificate to perform this operation.%1 does not have a certificate.%1 ne havas atestilon.Invalid username: %1.Nevalida uzantnomo: %1.Invalid username.Nevalida uzantnomo.Channel is full.Kanalo estas plena.Channel nesting limit reached.Channel count limit reached. Need to delete channels before creating new ones.Permission denied.%1 connected and entered channel.%1 connected.%1 konektis.%1 is now muted.%1 nun estas muta.%1 is now unmuted.%1 nun estas malmuta.Recording startedRecording stopped%1 started recording.%1 stopped recording.You revoked your priority speaker status.You assumed priority speaker status.%1 revoked your priority speaker status.%1 gave you priority speaker status.You revoked priority speaker status for %1.You gave priority speaker status to %1.%1 revoked own priority speaker status.%1 assumed priority speaker status.%1 revoked priority speaker status for %2.%1 gave priority speaker status to %2.You were unmuted and undeafened by %1.Vi malmutiĝis kaj malsurdiĝis de %1.You were muted by %1.Vi mutiĝis de %1.You were undeafened by %1.Vi malsurdiĝis de %1.You were suppressed.You were suppressed by %1.You were unsuppressed.You were unsuppressed by %1.You joined %1.You moved %1 to %2.Vi movis na %1 al %2.%1 is recording%1 renamed to %2 by %3.%1 disconnected.%1 malkonektis.Servermessage fromServiloFailed to load Opus, it will not be available for audio encoding/decoding.The server requests minimum client version %1The server requests positional audio be enabled.The server requests positional audio be disabled.The server requests Push-to-Talk be enabled.The server requests Push-to-Talk be disabled.You were unmuted by %1.Vi malmutiĝis de %1.You muted %1.Vi mutigis na %1.You unsuppressed %1.You unmuted %1.Vi malmutigis na %1.%1 muted by %2.%1 mutiĝis de %2.%1 unsuppressed by %2.%1 unmuted by %2.%1 malmutiĝis de %2.Unable to find matching CELT codecs with other clients. You will not be able to talk to all users.You were muted and deafened by %1.You were deafened by %1.Vi mutiĝis kaj surdiĝis de %1.You were kicked from the server by %1: %2.%3 was kicked from the server by %1: %2.You were kicked and banned from the server by %1: %2.%3 was kicked and banned from the server by %1: %2.You were moved to %1 by %2.Vi moviĝis de %2 al %1.%1 entered channel.%1 eniris la kanalon.Server connection rejected: %1.Malakceptis la servilan konekton: %1.Denied: %1.Malpermesis: %1.%1 renamed to %2.%1 renomiĝis al %2.%1 left channel and disconnected.%1 foriris la kanalon kaj malkonektis.Message from %1Mesaĝo de %1You have User Dragging set to "Do Nothing" so the user wasn't moved.You have Channel Dragging set to "Do Nothing" so the channel wasn't moved.Unknown Channel Drag mode in UserModel::dropMimeData.Remote controlling Mumble:
InvocationAlvokoError: No RPC command specifiedEraro: Ne specifis komandon de RPC RPCRPCWelcome to Mumble.Bonvenon al Mumble.Skipping version check in debug mode.Hide FrameKaŝi la KadronToggle showing frame on minimal windowThis will toggle whether the minimal window should have a frame for moving and resizing.&Unlink AllMalligi ĈionReset the comment of the selected user.Nuligi la komenton de la elektita uzanto.&Join Channel&Eniri kanalonView comment in editorQuery server for connection information for userS&erverS&ervilo&Self&Unlink PluginsRegister yourself on the serverRegistrigi vin en la servilonChange your avatar image on this serverŜanĝi vian avatarbildon en la servilo&Remove AvatarForigi la AvataronRemove currently defined avatar image.Icon ToolbarChange your own commentŜanĝi vian propran komentonRecordingPriority Speaker&Copy URL&Kopii na la URLCopies a link to this channel to the clipboard.Ignore MessagesIgnori MesaĝojnLocally ignore user's text chat messages.Loke ignori la tekstajn babilmesaĝojn de la uzanto.Silently drops all text messages from the user.Edit ban list on serverThis lets you edit the server-side IP ban list.&Filter on/off&Filtrilo ŝaltita/malŝaltitaToggle the channel filter (Ctrl+F)Baskuligi la kanal-filtron (Ctrl+F)Enable or disable the filtering of select channels.
By default all empty channels will be filtered.
You can mark additional channels for filtering from
the channel's context menu.Ctrl+FCtrl+F&Hide Channel when FilteringKaŝi Kanalon dum FiltranteReset the avatar of the selected user.Rekomencigi la avataron de la elektita uzanto.Locally adjust the user's speech volume.Opens a dialog with a volume slider. Use this on other users in the same room.&Developer&Hide MumbleHides the main Mumble window.Hides the main Mumble window. Restore by clicking on the tray icon or starting Mumble again.Show the Developer ConsoleShows the Mumble Developer Console, where Mumble's log output can be inspected.&Connect...&Ban list...&Information...&Kick...&Ban...Local Volume Adjustment...Send &Message...&Add...&Remove...&Edit...%RedaktiAudio S&tatistics...&Settings...&Audio Wizard...Developer &Console...&About...&Pri...About &Speex...About &Qt...&Certificate Wizard...&Register...Registered &Users...Change &Avatar...&Access Tokens...Reset &Comment...Reset &Avatar...View Comment...&Change Comment...R&egister...ShowShows the main Mumble window.Server sync protocol violation. No user profile received.Protocol violation. Server sent remove for occupied channel.Listen to channelListen to this channel without joining itLocally adjust the volume for this virtual ear.&ListenerNo action available...Unable to %1 into %2 - Adding the respective access (password) token might grant you access.No more listeners allowed in this channel.You are not allowed to listen to more channels than you currently are.You started listening to %1%1 started listening to your channelYou stopped listening to %1Vi ĉesis aŭskultadi %1%1 stopped listening to your channel%1 ĉesis aŭskultadi vian kanalonTalking UIToggles the visibility of the TalkingUI.Join user's channelKuniĝi al la kanalo de la uzantoJoins the channel of this user.Kuniĝos al la kanalo de ĉi tiu uzanto.Channels and usersKanaloj kaj uzantojActivity logAktiveca protokoloChat messageBabila mesaĝoDisable Text-To-SpeechLocally disable Text-To-Speech for this user's text chat messages.Silently disables Text-To-Speech for all text messages from the user.TreeArboChannelKanaloPrivatePrivata%1: %2%1: %2(%1) %2(%1) %2Configuration file %1 does not exist or is not writable.
Agordadosiero %1 ne ekzistas aŭ ĝi estas neverkebla.
Hide/show main windowGlobal ShortcutKaŝi/Montri ĉefafenestron&Set Nickname...Set a local nicknameSets a local nickname for another user.Usage: mumble rpc <action> [options]
It is possible to remote control a running instance of Mumble by using
the 'mumble rpc' command.
Valid actions are:
mute
Mute self
unmute
Unmute self
togglemute
Toggle self-mute status
deaf
Deafen self
undeaf
Undeafen self
toggledeaf
Toggle self-deafen status
starttalking
Start talking
stoptalking
Stop talking
Usage: mumble [options] [<url> | <plugin_list>]
<url> specifies a URL to connect to after startup instead of showing
the connection window, and has the following form:
mumble://[<username>[:<password>]@]<host>[:<port>][/<channel>[/<subchannel>...]][?version=<x.y.z>]
<plugin_list> is a list of plugin files that shall be installed
The version query parameter has to be set in order to invoke the
correct client version. It currently defaults to 1.2.0.
Valid options are:
-h, --help Show this help text and exit.
-m, --multiple
Allow multiple instances of the client to be started.
-c, --config
Specify an alternative configuration file.
If you use this to run multiple instances of Mumble at once,
make sure to set an alternative 'database' value in the config.
-n, --noidentity
Suppress loading of identity files (i.e., certificates.)
-jn, --jackname <arg>
Set custom Jack client name.
--license
Show the Mumble license.
--authors
Show the Mumble authors.
--third-party-licenses
Show licenses for third-party software used by Mumble.
--window-title-ext <arg>
Sets a custom window title extension.
--dump-input-streams
Dump PCM streams at various parts of the input chain
(useful for debugging purposes)
- raw microphone input
- speaker readback for echo cancelling
- processed microphone input
--print-echocancel-queue
Print on stdout the echo cancellation queue state
(useful for debugging purposes)
--translation-dir <dir>
Specifies an additional translation fir <dir> in which
Mumble will search for translation files that overwrite
the bundled ones
Directories added this way have higher priority than
the default locations used otherwise
--print-translation-dirs
Print out the paths in which Mumble will search for
translation files that overwrite the bundled ones.
(Useful for translators testing their translations)
--locale <locale>
Overwrite the locale in Mumble's settings with a
locale that corresponds to the given locale string.
If the format is invalid, Mumble will error.
Otherwise the locale will be permanently saved to
Mumble's settings.
ManualManual Mumble Positional AudioPositionPozicioXXYYZZmmHeadingAzimuthAzimutoElevation°Meta dataContextKuntekstoIdentitySetStateStatoUnhingeLinkActivateDisplayHow long silent user's positions should stay marked after they have stopped talking (in seconds).Silent user displaytime:NetworkConfigNetworkRetoConnectionKonektoUse TCP compatibility modeUse TCP compatability mode<b>Enable TCP compatibility mode</b>.<br />This will make Mumble use only TCP when communicating with the server. This will increase overhead and cause lost packets to produce noticeable pauses in communication, so this should only be used if you are unable to use the default (which uses UDP for voice and TCP for control).Reconnect when disconnectedRekonekti post malkonektiĝo<b>Reconnect when disconnected</b>.<br />This will make Mumble try to automatically reconnect after 10 seconds if your server connection fails.<b>Rekonekti post malkonektiĝo</b>.<br/>Tio igos na Mumble aŭtomate provi rekonekti post 10 sekundoj, se via servila konekto fiaskas.Reconnect automaticallyRekonekti aŭtomateProxyProkuriloTypeTipoType of proxy to connect throughTipo de prokurilo por konekti traDirect connectionSenpera konektoHTTP(S) proxyHTTP(S)-prokuriloSOCKS5 proxySOCKS5-prokuriloHostnameNomo de gastiga komputiloHostname of the proxyNomo de la prokurila gastiga komputiloForce TCP modeEnable QoS to prioritize packetsEbligi QoS-on por prioritatigi datumpaketojnThis will enable QoS, which will attempt to prioritize voice packets over other traffic.Ĉi tio ebligos QoS-on, kiu provos prioritatigi voĉdatumpaketojn pli ol alia datumtrafiko.Use Quality of ServiceUzi Servokvaliton (QoS)Don't send certificate to server and don't save passwords. (Not saved).Ne sendu atestilon al servilo kaj ne konservu pasvortojn. (Ne estos konservitaj).<b>This will suppress identity information from the client.</b><p>The client will not identify itself with a certificate, even if defined, and will not cache passwords for connections. This is primarily a test-option and is not saved.</p>Suppress certificate and password storage<b>Type of proxy to connect through.</b><br />This makes Mumble connect through a proxy for all outgoing connections. Note: Proxy tunneling forces Mumble into TCP compatibility mode, causing all voice data to be sent via the control channel.<b>Hostname of the proxy.</b><br />This field specifies the hostname of the proxy you wish to tunnel network traffic through.PortPordoPort number of the proxyPorda numero de la prokurilo<b>Port number of the proxy.</b><br />This field specifies the port number that the proxy expects connections on.UsernameUzantnomoUsername for proxy authenticationUzantnomo por prokuril-aŭtentikeco<b>Username for proxy authentication.</b><br />This specifies the username you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.PasswordPasvortoPassword for proxy authenticationPasvorto por prokuril-aŭtentikeco<b>Password for proxy authentication.</b><br />This specifies the password you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.Mumble servicesServoj de MumbleCheck for new releases of Mumble automatically.This will check for new releases of Mumble every time you start the program, and notify you if one is available.Check for application updates on startupCheck for new releases of plugins automatically.This will check for new releases of plugins every time you start the program, and download them automatically.<b>Submit anonymous statistics.</b><br />Mumble has a small development team, and as such needs to focus its development where it is needed most. By submitting a bit of statistics you help the project determine where to focus development.Submit anonymous statistics to the Mumble projectSubmit anonymous statisticsReconnect to last used server when starting MumbleReconnect to last server on startupPrivacyPrivatecoPrevent OS information being sent to Mumble servers and web servers<b>Don't send OS information to servers</b><br/>
Prevents the client from sending potentially identifying information about the operating system to the Mumble server and web servers.Do not send OS information to Mumble servers and web serversWhen toggled this hides the public server list from the connect dialogHide public server listKaŝi la publikan servilalistonCheck for plugin updates on startupAutomatically download and install plugin updatesOverlaySilentSilentaTalkingParoladoWhisperFlustriShoutKriiChannelKanaloFailed to create communication with overlay at %2: %1. No overlay will be available.OverlayClientFilterFiltriOnly talkingNur parolanteTalking and recently activeParolante kaj aktive antaŭ ne longeAll in current channelAll in linked channelsAlways show yourselfĈiam montri vi memConfigure recently active time (%1 seconds)...ColumnsKolumnojSortOrdigiAlphabeticallyAlfabeteLast state changeLasta ŝanĝo de la statoEdit...Redakti...Reset ZoomConfigure recently active timeAmount of seconds users remain active after talking:OverlayConfigTo move the users, drag the little red dot.To resize the users, mouse wheel over a user.To resize the users, mousewheel over a user.For more options, right click a user.For more options, rightclick a user.Dekstre alklaki uzanton por vidi pli da opcioj.Launcher FilterOverlayTegoChoose executableChoose applicationElekti aplikaĵonChoose pathElekti vojonLoad Overlay PresetsMumble overlay presets (*.mumblelay)Save Overlay PresetsKonservi antaŭagordojn de tegoOptionsOpciojEnable overlay.Ŝalti tegon.Enable OverlayŜalti TegonThis sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.<br />Please note that if you start Mumble after starting the application, or if you disable the overlay while the application is running, there is no safe way to restart the overlay without also restarting the application.This sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.<br />Please note that if you start the application after starting Mumble, or if you disable the overlay while running, there is no safe way to restart the overlay without also restarting the application.LayoutAranĝoBlacklistNigralistoWhitelistBlankalistoUninstall OverlayMalinstali TegonOverlay InstallationInstaleco de TegoMumble has detected that you do not have the Mumble Overlay installed.
Click the button below to install the overlay.Install Mumble OverlayOverlay UpgradeMumble has detected an old version of the overlay support files installed on your computer.
To upgrade these files to their latest versions, click the button below.Upgrade Mumble OverlayDisplay a frame counter in the overlayShow FPS counterLoad an overlay preset from fileLoad…Ŝargi..Save your overlay settings to fileSave…Konservi...Set the overlay font.Set the overlay text color.ColorKoloroRemoveForigiFontTiparoFPS and Clock DisplayDisplay a clock in the overlay showing the current local time (system time).Show ClockMontri horloĝonOverlay ExceptionsOverlay Exception ModeAllowed launchersAddAldoniAllowed programsPermesitaj programojAllowed pathsPermesitaj vojojBlacklisted programsBarlistigitaj programojOverlayEditorStateStatoUser is not talkingUzanto ne estas parolantaPassivePasivaUser is talking in your channel or a linked channelLa uzanto estas parolanta en aŭ via kanalo aŭ ligita kanalo.TalkingParolanteUser is whispering to you privatelyLa uzanto estas flustranta private al viPrivate WhisperPrivata FlustroUser is shouting to your channelUzanto krias al via kanaloChannel WhisperKanala FlustroZoomZomiZoom FactorZomfaktoroEnabled ElementsUser avatar, chosen by each userAvatarAvataroUser's nameNomo de la uzantoUsernameUzantnomoName of user's channel, if outside your current channelKanalnomo de uzanto, kiam ekster via nuna kanaloChannelKanaloMuted or deafenedMutigite aŭ surdigiteMute stateMutstatoBounding box, automatically shrunk to minimum size to contain all visible elementsBounding boxLimiga kestoOverlay EditorZoom levelZomecoOverlayEditorSceneLayout presetLarge square avatarAvatar and NameAvataro kaj NomoUser Opacity%1%%1%Object OpacityAlignmentĜisrandigoLeftMaldekstraCenterCentraRightDekstraTopSupraBottomMalsupraColor...Koloro...Font...Tiparo...Bounding boxLimiga kestoPen widthPaddingPen colorFill colorPick pen colorPick fill colorPick colorPick fontPluginConfigPluginsPlugin has no configure function.Plugin has no about function.OptionsOpciojEnable plugins and transmit positional informationThis allows plugins for supported games to fetch your in-game position and transmit it with each voice packet. This enables other users to hear your voice in-game from the direction your character is in relation to their own.Link to Game and Transmit PositionReloads all pluginsThis rescans and reloads plugins. Use this if you just added or changed a plugin to the plugins directory.&Reload pluginsInformation about pluginInformoj pri la kromprogramoThis shows a small information message about the plugin.&About&PriShow configuration page of pluginThis shows the configuration page of the plugin, if any.&Configure&AgordiNameNomoEnablePAKeyEventsInstall a plugin from a local fileInstall plugin...Unload the currently selected plugin. This will remove it from the plugin list for the current session.UnloadThe plugin was installed successfullyUnable to deactivate all requested features for plugin "%1"Unable to load plugin "%1"Whether the positional audio feature of this plugin should be enabledThis plugin does not provide support for positional audioWhether this plugin has the permission to be listening to all keyboard events that occur while Mumble has focusWhether this plugin should be enabledPluginInstallerPluginInstallerYou are about to install the plugin listed below. Do you wish to proceed?<html><head/><body><p><span style=" font-weight:600;">Name:</span></p></body></html><html><head/><body><p><span style=" font-weight:600;">Version:</span></p></body></html><html><head/><body><p><span style=" font-weight:600;">Author(s):</span></p></body></html><html><head/><body><p><span style=" font-weight:600;">Description:</span></p></body></html>&No&YesThe file "%1" is not a valid plugin file!Found more than one plugin library for the current OS in "%1" ("%2" and "%3")!Unable to find a plugin for the current OS in "%1"Unable to load plugin "%1" - check the plugin interface!Unable to delete old plugin at "%1"Unable to copy plugin library from "%1" to "%2"Unable to move plugin library to "%1"PluginManager%1 lost link%1 linkedPlugin "%1" encountered a permanent error in positional data gatheringNon-plugin found in plugin directory: "%1"Failed at loading manual plugin: %1PluginUpdaterPluginUpdaterThe following plugins can be updated.Select allPluginDownload-URLDo you want to update the selected plugins?Unable to download plugin update for "%1" from "%2" (%3)Update for plugin "%1" failed due to too many redirectsUnable to download plugin update for "%1" from "%2" (HTTP status code %3)Successfully updated plugin "%1"PortAudioSystemDefault devicePulseAudioSystemDefault InputDefault OutputQApplicationFailed to restart mumbleMumble failed to restart itself. Please restart it manually.Mumble is currently connected to a serverQObjectCodecInit: Failed to load Opus, it will not be available for encoding/decoding audio.Talking UIEcho cancellation is not supported for the interface combination "%1" (in) and "%2" (out).<p>If you're using Linux this is most likely because you are using a version from your distribution's package repository that have their own update cycles.</p><p>If you want to always have the most recent Mumble version, you should consider using a different method of installation.
See <a href="https://wiki.mumble.info/wiki/Installing_Mumble">the Mumble wiki</a> for what alternatives there are.</p>Local MuteLoke MutigiIgnore MessagesIgnori MesaĝojnDisable Text-To-Speech"%1" could not be saved permanently and is lost on restart because %2 does not have a certificate.Local Volume Adjustment...<p>You're using a Mumble version that <b>explicitly disabled</b> update-checks.</p><p>This means that the update notification you might receive by using this option will <b>most likely be meaningless</b> for you.</p>Talking (muted)All messagesToggle console for all eventsToggle pop-up notifications for all eventsToggle window highlight (if not active) for all eventsClick here to toggle sound notifications for all eventsToggle Text-to-Speech for all eventsRNNoise is not available due to a sample rate mismatch.Reset all settings?Do you really want to reset all settings (not only the ones currently visible) to their default value?Local Nickname Adjustment...<b>Blocked URL scheme "%1"</b>The URL uses a scheme that has been blocked for security reasons.Blocked URL: "%1"Default DeviceDefaŭlta aparatoAccess to the microphone was denied. Please allow Mumble to use the microphone by changing the settings in System Preferences -> Security & Privacy -> Privacy -> Microphone.Access to the microphone was denied due to system restrictions. You will not be ableto use the microphone in this session.If enabled this tries to cancel out echo from the audio stream.DisabledElŝaltiteEcho cancellation is disabled.Mixed echo cancellation (speex)Mixed has low CPU impact, but only works well if your speakers are equally loud and equidistant from the microphone.Multichannel echo cancellation (speex)Multichannel echo cancellation provides much better echo cancellation, but at a higher CPU cost. Multichannel echo cancellation requires more CPU, so you should try mixed first.The provided URL uses an invalid version format: "%1"The directories in which Mumble searches for extra translation files are:
InvocationAlvokoEXPERIMENTAL: Acoustic echo cancellation (Apple).The support for this option is experimental only! This option works best when using built-in microphone and speaker.RichTextEditorFailed to load imageMalsukcesis ŝargi la bildonImage file too large to embed in document. Please use images smaller than %1 kB.Message is too long.Mesaĝo estas tro longa.DisplaySource TextFont-texto&Bold&GraseCtrl+BCtrl+B&Italic&KursiveItalicKursiveCtrl+ICtrl+IUnderlineSubstrekiteCtrl+UCtrl+UColorKoloroInsert LinkEnmeti LigilonCtrl+LCtrl+LInsert ImageEnmeti BildonRichTextEditorLinkAdd LinkAldoni LigilonURLURLTextTekstoServerHandlerUnable to resolve hostnameNe eblas malkomponi servilonomonServer is not responding to TCP pingsL'Servilo ne respondas al TCP-aj eĥosondojUDP packets cannot be sent to or received from the server. Switching to TCP mode.UDP-ajn datumpaketojn ne eblas sendi aŭ ricevi de la servilo. Nune ŝanĝas al TCP-an modon.UDP packets cannot be sent to the server. Switching to TCP mode.UDP-a datumpaketoj ne povas sendiĝi al la servilo. Nune ŝanĝas al TCP-an modon.UDP packets cannot be received from the server. Switching to TCP mode.UDP-a datumpaketoj ne povas riceviĝi de la servilo. Nune ŝanĝas al TCP-an modon.UDP packets can be sent to and received from the server. Switching back to UDP mode.UDP-a datumpaketoj povas sendiĝi al, kaj riceviĝi de, la servilo. Nune revenas al UDP-an modon.Connection timed outL'Konekto tempolimiĝisServerInformationServer informationServer Information<b>Host:</b><html><head/><body><p><span style=" font-weight:600;">Port:</span></p></body></html><b>Users</b>:<html><head/><body><p><span style=" font-weight:600;">Protocol:</span></p></body></html><html><head/><body><p><span style=" font-weight:600;">Release:</span></p></body></html><html><head/><body><p><span style=" font-weight:600;">OS:</span></p></body></html>Audio<html><head/><body><p><span style=" font-weight:600;">Allowed:</span></p></body></html><b>Current:</b><b>Codec:</b>Connection detailsUDP (Voice)UDP (Voĉo)<b>Encryption:</b><b>Avg. latency:</b>StatisticsGoodBoneLateMalfruaLostPerditaResyncOutgoingIncomingVoice packets is currently sent over TCP.TCP (Control)TCP (Kontrolo)<b>TLS version:</b><b>Cipher suite:</b><forward secrecy>&View certificate&OkUnknownThe connection provides perfect forward secrecy.The connection does NOT provide perfect forward secrecy.No information about forward secrecy available.ServerViewFavoritePlejŝataLANLANPublic InternetPublika InterretoShortcutActionWidgetUnassignedNeatribuiteShortcutDelegateOnEnOffMalŝaltitaToggleBaskuligiUnassignedNeatribuiteNo buttons assignedPress to show button combinationShortcutTargetDialogRootRadikoParentPatroCurrentAktualaSubchannel #%1La %1a SubkanaloShortcutTargetWidget......, ,RootRadikoParentPatroCurrentAktualaSubchannel #%1La %1a SubkanaloInvalidNevalideEmpty<Empty>MalpleneCurrent selectionShortcutToggleWidgetOffMalŝaltitaToggleBaskuleOnŜaltiteTextMessageEnter textEnigu tekstonIf checked the message is recursively sent to all subchannelsSend recursively to subchannelsMessageMesaĝoTokensEmpty TokenMumble - Access TokensMumble - AtingoĵetonojList of access tokens on current serverListo da atingoĵetonoj en aktuala servilo<b>This is an editable list of access tokens on the connected server.</b>
<br />
An access token is a text string, which can be used as a password for very simple access management on channels. Mumble will remember the tokens you've used and resend them to the server next time you reconnect, so you don't have to enter these every time.
Add a tokenAldoni ĵetonon&Add&AldoniRemove a tokenForigi ĵetonon&Remove&ForigiTokensUserEditRegistered UsersRegistritaj UzantojRemoveForigiRenameAlinomiWho are you looking for?Kiun serĉas vi?DaysTagojWeeksSemajnojMonthsMonatojYearsJarojInactive forRegistered users: %n account(s)Registritaj uzantoj: %n konto(j)Registritaj uzantoj: %n konto(j)SearchSerĉiUser listUserInformationUser InformationInformoj de la UzantoConnection InformationInformoj de la KonektoVersionVersioOSCertificateAtestiloIP AddressIP-adresoCELT VersionsDetails...Detaloj...Ping StatisticsPings receivedAverage pingTCP (Control)TCP (Kontrolo)UDP (Voice)UDP (Voĉo)UDP Network statisticsGoodBoneLateMalfruaLostPerditaResyncFrom ClientDe KlientoTo ClientAl KlientoConnection time%1w%1sem%1d%1t%1h%1h%1m%1m%1s%1s, , %1 (%2)%1.%2.%3 (%4)%1 (%2)SupportedSuptenateNot SupportedNesuptenateNot Reported%1 online (%2 idle)%1 online%1 konektita%1 kbit/s%1 kbitoj/sBandwidthGroupBoxKapacitoBandwidthLabelKapacitoPing deviationUserListModelNickKromnomoInactive daysLast channelLast seen: %1NeverNeniamChannel ID: %1UserLocalNicknameDialogLocal nickname for other users<b>Adjust the nickname of other users locally</b><br />User nicknameAdjusting local nickname for %1UserLocalVolumeDialogLocal volume for other users<b>Adjust the volume of other users locally</b><br />Mumble supports adjusting the volume of other users locally.Adjusting local volume for %1 dB<html><head/><body><p>Use the slider or the text box to change the volume of the user.</p><p><span style="font-weight:600;">Attention!</span></p><p>Increasing the volume of a user too much can permanently damage your hearing. It may also increase the background noise of the user.</p></body></html>User volumeUserModelThis is a user connected to the server. The icon to the left of the user indicates whether or not they are talking:Talking to your channel.Shouting directly to your channel.Whispering directly to your channel.Whispering directly to you.Not talking.This is a channel on the server. The icon indicates the state of the channel:Your current channel.A channel that is linked with your channel. Linked channels can talk to each other.A channel on the server that you are not linked to.This shows the flags the user has on the server, if any:On your friend listAuthenticated userMuted (manually muted by self)Muted (manually muted by admin)Muted (not allowed to speak in current channel)Muted (muted by you, only on your machine)Muted (push-to-mute)Deafened (by self)Deafened (by admin)User has a new comment set (click to show)User has a comment set, which you've already seen. (click to show)Ignoring Text MessagesThis shows the flags the channel has, if any:Channel has a new comment set (click to show)Channel has a comment set, which you've already seen. (click to show)Channel will be hidden when filtering is enabledNameNomoFlagsAre you sure you want to drag this user?Are you sure you want to drag this channel?Cannot perform this movement automatically, please reset the numeric sorting indicators or adjust it manually.Talking while being muted on your endThis is a channel listener. The corresponding user hears everything you say in this channel.Channel has access restrictions so that you can't enter itChannel has access restrictions but you can enter nonethelessVersionCheckUpgrade MumbleA new version of Mumble has been detected and automatically downloaded. It is recommended that you either upgrade to this version, or downgrade to the latest stable release. Do you want to launch the installer now?Failed to launch snapshot installer.Corrupt download of new version detected. Automatically removed.Downloading new snapshot from %1 to %2Failed to write new version to disk.Failed to write new version to disc.Mumble failed to retrieve version information from the central server.ViewCertCertificate Chain DetailsCertificate chainCertificate detailsDetaloj de la atestiloCommon NameOrganizationSubunitCountryLocalityStateStatoValid from: %1Valid to: %1Serial: %1Public Key: %1 bits %2RSADSADigest (SHA-1): %1Digest (SHA-256): %1Email: %1Retpoŝto: %1DNS: %1DNS: %1Issued by:Unit NameVoiceRecorderRecorder failed to create directory '%1'Recorder failed to open file '%1'.wav - Uncompressed.ogg (Vorbis) - Compressed.au - Uncompressed.flac - Lossless compressedVoiceRecorderDialogRecorderControl00:00:0000:00:00&StartS&topModeReĝimoMultichannelOutputEligoOutput formatTarget directoryFilenameDosiernomo&Browse...&FoliumiValid variables are:Inserts the user's nameInserts the current dateInserts the current timeInserts the hostnameEnmetas la nomon de gastiga komputiloRecorder still runningClosing the recorder without stopping it will discard unwritten audio. Do you really want to close the recorder?Unable to start recording. Not connected to a server.The server you are currently connected to is version 1.2.2 or older. For privacy reasons, recording on servers of versions older than 1.2.3 is not possible.
Please contact your server administrator for further information.There is already a recorder active for this server.Please select a recording format.StoppingSelect target directoryElekti celdosieronDownmixWASAPIInputAccess to the microphone was denied. Please check that your operating system's microphone settings allow Mumble to use the microphone.WASAPISystemDefault DeviceDefaŭlta aparatoqwPTTButtonWidgetMumble PTTMumble PPPPush to talkPremi por paroli