ACLEditor
Deny
拒絕
Allow
允許
Allow %1
允許 %1
Deny %1
拒絕 %1
Mumble - Add channel
Mumble - 新增頻道
Default server value
伺服器預設值
Failed: Invalid channel
失敗: 無效的頻道
Mumble - Edit %1
Mumble - 編輯 %1
ID: %1
ID: %1
This grants the %1 privilege. If a privilege is both allowed and denied, it is denied.<br />%2
授予 %1 權限.如果一個權限同時被拒絕和允許,則視為被拒絕。<br />%2
Channel must have a name
頻道必須指定一個名稱
This revokes the %1 privilege. If a privilege is both allowed and denied, it is denied.<br />%2
撤銷 %1 權限.如果一個權限同時被拒絕和允許,則視為被拒絕。<br />%2
Dialog
對話框
Name
名稱
Enter the channel name here.
在此輸入頻道名稱。
Description
描述
Password
密碼
Enter the channel password here.
在此輸入頻道密碼。
Check to create a temporary channel.
點此建立臨時頻道。
Temporary
臨時頻道
<b>Position</b><br/>
This value enables you to change the way Mumble arranges the channels in the tree. A channel with a higher <i>Position</i> value will always be placed below one with a lower value and the other way around. If the <i>Position</i> value of two channels is equal they will get sorted alphabetically by their name.
<b>Position</b><br/>
This value enables you to change the way mumble arranges the channels in the tree. A channel with a higher <i>Position</i> value will always be placed below one with a lower value and the other way around. If the <i>Position</i> value of two channels is equal they will get sorted alphabetically by their name.
這個數值讓您改變頻道在 Mumble 清單樹的部署位置。當頻道擁有較小的數值時,將被放在比較上面的位置,如果有多個頻道擁有相同數值時,將依頻道名稱做排序。
Position
順位
&Groups
群組(&G)
Group
群組
List of groups
群組清單
Remove selected group
刪除群組
Remove
刪除
Inherit group members from parent
繼承自父組成員
Inherit
繼承
Make group inheritable to sub-channels
使群組可被子頻道繼承
Inheritable
可繼承
Group was inherited from parent channel
繼承自父頻道的群組
Inherited
繼承的
Members
成員
Add
新增
Add member to group
新增群組成員
Remove member from group
刪除群組成員
&ACL
存取控制表(&A)
Active ACLs
目前的存取控制規則
List of entries
存取規則列表
Inherit ACL of parent?
繼承自父存取控制表?
This sets whether or not the ACL up the chain of parent channels are applied to this object. Only those entries that are marked in the parent as "Apply to sub-channels" will be inherited.
設定是否將父頻道的存取控制表套用至當前對象。只有在父頻道內被標記為“套用到子頻道”的項目將被繼承。
Inherit ACLs
繼承存取控制表
Move entry up
上移規則順位
This moves the entry up in the list. As entries are evaluated in order, this may change the effective permissions of users. You cannot move an entry above an inherited entry, if you really need that you'll have to duplicate the inherited entry.
在列表中上移規則順位。由於規則自上而下依序處理,這有可能改變使用者的有效權限。你不能將一個項目移到繼承的項目之上,如果你確實想這麼做,你需要複製繼承的規則。
&Up
上移(&U)
Move entry down
下移規則順位
This moves the entry down in the list. As entries are evaluated in order, this may change the effective permissions of users.
在列表中下移規則順位。由於規則自上而下依序處理,這有可能改變使用者的有效權限。
&Down
下移(&D)
Add new entry
新增規則
This adds a new entry, initially set with no permissions and applying to all.
新增規則,預設值為無權限且套用到所有項目。
&Add
新增(&A)
Remove entry
刪除規則
This removes the currently selected entry.
刪除選取的規則。
&Remove
刪除(&R)
Context
前後關系
Entry should apply to this channel.
Entry should apply to this channel
輸入的內容將應用於此頻道。
This makes the entry apply to this channel.
指定規則到目前頻道。
Applies to this channel
使用在目前頻道
Entry should apply to sub-channels.
使用在子頻道的規則。
Add new group
新增群組
<b>Add</b><br/>
Add a new group.
<b>新增</b><br/>
新增群組。
Inherited members
繼承的成員
Contains the list of members added to the group by this channel.
顯示被頻道加入群組的成員。
Contains a list of members whose group membership will not be inherited from the parent channel.
顯示不繼承父頻道的成員。
Contains the list of members inherited by other channels.
顯示繼承其他頻道的成員。
Type in the name of a user you wish to add to the group and click Add.
輸入欲移入本群組的使用者名稱並點選新增。
Type in the name of a user you wish to remove from the group and click Add.
輸入欲移出本群組的使用者名稱並點選移除。
Exclude
拒絕
Excluded members
排除的成員
This makes the entry apply to sub-channels of this channel.
使用該規則到目前頻道的子頻道。
Applies to sub-channels
套用到子頻道
Permissions
權限
User/Group
使用者/群組
Group this entry applies to
套用該規則的群組
User ID
使用者名稱
User this entry applies to
使用該規則的使用者
This controls which user this entry applies to. Just type in the user name and hit enter to query the server for a match.
控制該規則應用到哪個使用者。請向伺服器送出使用者名稱來查詢。
&Properties
屬性(&P)
<b>Name</b><br />Enter the channel name in this field. The name has to comply with the restriction imposed by the server you are connected to.
<b>名稱</b><br />在此輸入頻道名稱。此名稱必須符合連線伺服器的使用規則。
<b>Temporary</b><br />
When checked the channel created will be marked as temporary. This means when the last player leaves it the channel will be automatically deleted by the server.
<b>臨時頻道</b><br />
選擇後將建立一個臨時頻道。這表示當最後一個使用者離開的時候,本頻道將自動關閉。
<b>Group</b><br />
These are all the groups currently defined for the channel. To create a new group, just type in the name and press enter.
<b>群組</b><br />
這些是頻道內已設定好的群組。要建立新群組,只要輸入名稱並送出即可。
<b>Remove</b><br />This removes the currently selected group. If the group was inherited, it will not be removed from the list, but all local information about the group will be cleared.
<b>刪除</b><br />刪除選擇的群組。如果本群組是被繼承的,那將不會在此清單中消失,但是所有關於此群組的資訊將被清除。
<b>Inherit</b><br />This inherits all the members in the group from the parent, if the group is marked as <i>Inheritable</i> in the parent channel.
<b>繼承</b><br />如果父群組被標記為<i>可繼承</i>則此群組的所有成員將來自父群組。
<b>Inheritable</b><br />This makes this group inheritable to sub-channels. If the group is non-inheritable, sub-channels are still free to create a new group with the same name.
<b>可繼承</b><br/>使本群組可繼承到子頻道。如果群組不可繼承,則子頻道可以建立一個同名群組。
<b>Inherited</b><br />This indicates that the group was inherited from the parent channel. You cannot edit this flag, it's just for information.
<b>繼承</b><br/>表示群組設定來自父頻道,你無法編輯這個旗幟,它僅供參考。
<b>Members</b><br />
This list contains all members that were added to the group by the current channel. Be aware that this does not include members inherited by higher levels of the channel tree. These can be found in the <i>Inherited members</i> list. To prevent this list to be inherited by lower level channels uncheck <i>Inheritable</i> or manually add the members to the <i>Excluded members</i> list.
<b>成員</b><br/>這份清單涵蓋目前頻道所有已加入群組的成員。請注意,這並未包含來自頻道樹中繼承自父頻道的成員。繼承自父頻道的成員可以在<i>繼承的成員</i>清單中找到。要防止這份清單被等級較低的頻道繼承,取消<i>可繼承</i>或手動增加到<i>排除的成員</i>名單。
<b>Excluded members</b><br />
Contains a list of members whose group membership will not be inherited from the parent channel.
<b>Inherited members</b><br />
Contains the list of members inherited by the current channel. Uncheck <i>Inherit</i> to prevent inheritance from higher level channels.
This controls which group of users this entry applies to.<br />Note that the group is evaluated in the context of the channel the entry is used in. For example, the default ACL on the Root channel gives <i>Write</i> permission to the <i>admin</i> group. This entry, if inherited by a channel, will give a user write privileges if he belongs to the <i>admin</i> group in that channel, even if he doesn't belong to the <i>admin</i> group in the channel where the ACL originated.<br />If a group name starts with '!', its membership is negated, and if it starts with '~', it is evaluated in the channel the ACL was defined in, rather than the channel the ACL is active in.<br />If a group name starts with '#', it is interpreted as an access token. Users must have entered whatever follows the '#' in their list of access tokens to match. This can be used for very simple password access to channels for non-authenticated users.<br />If a group name starts with '$', it will only match users whose certificate hash matches what follows the '$'.<br />A few special predefined groups are:<br /><b>all</b> - Everyone will match.<br /><b>auth</b> - All authenticated users will match.<br /><b>sub,a,b,c</b> - User currently in a sub-channel minimum <i>a</i> common parents, and between <i>b</i> and <i>c</i> channels down the chain. See the website for more extensive documentation on this one.<br /><b>in</b> - Users currently in the channel will match (convenience for '<i>sub,0,0,0</i>').<br /><b>out</b> - Users outside the channel will match (convenience for '<i>!sub,0,0,0</i>').<br />Note that an entry applies to either a user or a group, not both.
<b>Password</b><br />This field allows you to easily set and change the password of a channel. It uses Mumble's access tokens feature in the background. Use ACLs and groups if you need more fine grained and powerful access control.
This shows all the entries active on this channel. Entries inherited from parent channels will be shown in italics.<br />ACLs are evaluated top to bottom, meaning priority increases as you move down the list.
ID of the channel.
頻道名稱。
Maximum Users
使用者最大值
Maximum number of users allowed in the channel
頻道內可允許的最大使用者數量
<b>Maximum Users</b><br />
This value allows you to set the maximum number of users allowed in the channel. If the value is above zero, only that number of users will be allowed to enter the channel. If the value is zero, the maximum number of users in the channel is given by the server's default limit.
This is the sort order for the channel.
Properties
Channel password
Maximum users
Channel name
Inherited group members
Foreign group members
Inherited channel members
Add members to group
List of ACL entries
ALSAAudioInput
Default ALSA Card
預設 ALSA 音效卡
Opening chosen ALSA Input failed: %1
無法打開所選 ALSA 輸入: %1
ALSAAudioOutput
Default ALSA Card
預設 ALSA 音效卡
Opening chosen ALSA Output failed: %1
無法打開所選 ALSA 輸出: %1
ALSAEnumerator
Getting name (longname) of the sound card failed: %1
Getting name of the sound card failed: %1
ASIOConfig
%1 (version %2)
%1 (版本 %2)
%1 -> %2 samples buffer, with %3 sample resolution (%4 preferred) at %5 Hz
%1 -> %2 samples buffer, with %3 sample resolution (%4 preferred) at %5Hz
%1 -> %2 取樣緩衝, 使用 %3 取樣解析度 (%4 優先) 在 %5 Hz
ASIO Initialization failed: %1
ASIO初始化失敗: %1
Failed to instantiate ASIO driver
無法初始化 ASIO 驅動
ASIO
ASIO
Device selection
選擇裝置
Device
裝置
Device to use for microphone
作為麥克風的裝置
This chooses what device to query. You still need to actually query the device and select which channels to use.
選擇要查詢的裝置。你仍需要實際查詢該裝置然後選擇要使用哪些聲道。
Query selected device
查詢所選裝置
This queries the selected device for channels. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.
查詢所選裝置的聲道。注意大多數 ASIO 驅動有極端漏洞,查詢裝置可能導致應用程式或系統當機。
&Query
查詢(&Q)
Configure selected device
設定選則的裝置
This configures the selected device. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.
設定選擇的裝置。注意大多數 ASIO 驅動有極端漏洞,查詢裝置可能導致應用程式或系統當機。
&Configure
設定(&C)
Capabilities
裝置訊息
Driver name
裝置名稱
Buffer size
緩重區大小
This will configure the input channels for ASIO. Make sure you select at least one channel as microphone and speaker. <i>Microphone</i> should be where your microphone is attached, and <i>Speaker</i> should be a channel that samples '<i>What you hear</i>'.<br />For example, on the Audigy 2 ZS, a good selection for Microphone would be '<i>Mic L</i>' while Speaker should be '<i>Mix L</i>' and '<i>Mix R</i>'.
This will configure the input channels for ASIO. Make sure you select at least one channel as microphone and speaker. <i>Microphone</i> should be where your microphone is attached, and <i>Speaker</i> should be a channel that samples '<i>What you hear</i>'.<br />For example, on the Audigy 2 ZS, a good selection for Microphone would be '<i>Mic L</i>' while Speaker should be '<i>Mix L</i>' and '<i>Mix R</i>'.
Configure input channels
設定輸入頻道
Channels
頻道
Microphone
麥克風
<-
←
->
→
Unused
未使用
Speakers
喇叭
List of microphones
List of speakers
ASIOInput
You need to select at least one microphone and one speaker source to use ASIO.
Opening selected ASIO device failed. No input will be done.
無法打開所選 ASIO 裝置。沒有可用輸入。
AboutDialog
About Mumble
關於 Mumble
&About Mumble
關於 Mumble(&A)
&License
授權(&L)
A&uthors
&Third-Party Licenses
OK
確定
License agreement
Authors
Third-party license agreements
<h3>Mumble (%1)</h3><p>%3</p><p><b>An Open Source, low-latency, high quality voice-chat utility</b></p><p><tt><a href="%2">%2</a></tt></p>
<h3>Mumble (%1)</h3><p>%3</p><p><b>為玩家而生的語音工具</b></p><p><tt><a href="%2">%2</a></tt></p>
AudioInput
Interface
界面
System
系統
Input method for audio
音源輸入
Device
裝置
Input device for audio
語音輸入裝置
<b>This is the input device to use for audio.</b>
這是用來輸入語音的裝置
Transmission
語音發送
&Transmit
語音發送時機(&T)
When to transmit your speech
何時發送你的語音
<b>This sets when speech should be transmitted.</b><br /><i>Continuous</i> - All the time<br /><i>Voice Activity</i> - When you are speaking clearly.<br /><i>Push To Talk</i> - When you hold down the hotkey set under <i>Shortcuts</i>.
<b>設置何時語音將被發送。</b><br /><i>連續</i>一直<br /><i>有語音活動</i> 當你說話清晰時。<br /><i>按鍵通話</i> - 當你按住作為<i>快捷鍵</i>的自定義按鍵組合時。
DoublePush Time
兩次按鍵時間間隔
If you press the PTT key twice in this time it will get locked.
如果你在時限內連按兩次發送鍵將會鎖定。
<b>DoublePush Time</b><br />If you press the push-to-talk key twice during the configured interval of time it will be locked. Mumble will keep transmitting until you hit the key once more to unlock PTT again.
<b>連點時間</b><br />如果你在設定時間內連按兩次發送鍵將會鎖定並持續發送語音,直到你再按一次發送鍵才會解鎖。
Reset audio cue to default
重設指示音效成預設值
<b>Reset</b><br/>Reset the paths for the files to their default.
<b>重設</b><br/>重設檔案路徑成預設值。
Browse for on audio file
選擇開始發送語音時的音效
Browse for off audio file
選擇停止發送語音時的音效
Off
停止發送時
On
開始發送時
Preview the audio cues
預覽語音發送指示音效
Use SNR based speech detection
使用基於 SNR(訊噪比) 的語音偵測
Signal to Noise
訊噪比
<b>This sets speech detection to use Amplitude.</b><br />In this mode, the raw strength of the input signal is used to detect speech.
<b>設置使用振幅來進行語音偵測。</b><br />在此模式下,輸入信號的原始強度被用於語音偵測。
Amplitude
振幅
Voice &Hold
持續時間(&H)
How long to keep transmitting after silence
無聲後多少時間內繼續發送音效
Silence Below
以下沉默
<b>This sets the trigger values for voice detection.</b><br />Use this together with the Audio Statistics window to manually tune the trigger values for detecting speech. Input values below "Silence Below" always count as silence. Values above "Speech Above" always count as voice. Values in between will count as voice if you're already talking, but will not trigger a new detection.
<b>設置語音檢測的觸發值。</b><br />與音訊統計窗口一起來使用該值以手工調整語音偵測的觸發值。輸入值低於"靜音判定" 時視為無聲。高於"語音判定"時視為講話中。如果你正在講話,期間的偵測值會被一直視為講話中,但是不會觸發一個新的偵測。
Speech Above
語音判定
Signal values above this count as voice
信號值高於這個值時視為語音
Compression
壓縮
&Quality
品質(&Q)
Quality of compression (peak bandwidth)
壓縮品質(峰值頻寬)
<b>This sets the quality of compression.</b><br />This determines how much bandwidth Mumble is allowed to use for outgoing audio.
<b>設定壓縮品質。</b><br />決定 Mumble 發送語音時使用的頻寬大小。
Audio per packet
封包音框數
How many audio frames to send per packet
每個封包發送多少音框
<b>This selects how many audio frames should be put in one packet.</b><br />Increasing this will increase the latency of your voice, but will also reduce bandwidth requirements.
<b>選擇一個封包裡放多少個音框。</b><br />增加這個數值會增加你的語音延遲,但也會減少頻寬需求。
<b>This shows peak outgoing bandwidth used.</b><br />This shows the peak amount of bandwidth sent out from your machine. Audio bitrate is the maximum bitrate (as we use VBR) for the audio data alone. Position is the bitrate used for positional information. Overhead is our framing and the IP packet headers (IP and UDP is 75% of this overhead).
<b>顯示發送語音佔用的頻寬。</b><br />顯示從你的機器發送時佔用的頻寬大小。
Audio Processing
音效處理
Noise suppression
雜訊抑制
<b>This sets the amount of noise suppression to apply.</b><br />The higher this value, the more aggressively stationary noise will be suppressed.
Maximum amplification of input sound
輸入聲音的最大放大率
<b>Maximum amplification of input.</b><br />Mumble normalizes the input volume before compressing, and this sets how much it's allowed to amplify.<br />The actual level is continually updated based on your current speech pattern, but it will never go above the level specified here.<br />If the <i>Microphone loudness</i> level of the audio statistics hover around 100%, you probably want to set this to 2.0 or so, but if, like most people, you are unable to reach 100%, set this to something much higher.<br />Ideally, set it so <i>Microphone Loudness * Amplification Factor >= 100</i>, even when you're speaking really soft.<br /><br />Note that there is no harm in setting this to maximum, but Mumble will start picking up other conversations if you leave it to auto-tune to that level.
<b>輸入的最大放大率。</b><br />Mumble 在壓縮前會規格化輸入音量,該選項設置音量被允許放大多少。<br />實際等級將根據你的語音模式來持續更新,但是不會高于這里指定的等級。<br />如果音頻統計的<i>麥克風響度</i>等級在 100%左右,你很有可能想把該值設為大約 2.0,但是如果像大多數人一樣,你不能達到 100%,設置一個更高的值。<br />理想狀態下,設置該值使<i>麥克風響度 * 放大率 >= 100</i>,甚至當你相當輕聲的講話時。<br /><br />注意設置該值為其最大值不會有任何副作用,但是如果你將該值設為自動調節到其最大值, Mumble 會開始拾取其他人的談話。
Current speech detection chance
目前語音偵測頻率
Enabling this will cancel the echo from your speakers. Mixed has low CPU impact, but only works well if your speakers are equally loud and equidistant from the microphone. Multichannel echo cancellation provides much better echo cancellation, but at a higher CPU cost.
Disabled
停用
<b>This sets speech detection to use Signal to Noise ratio.</b><br />In this mode, the input is analyzed for something resembling a clear signal, and the clarity of that signal is used to trigger speech detection.
<b>設置使用訊噪比來進行語音偵測。</b><br /> 在此模式下,將從輸入中尋找並分析出一個近似清晰的信號,而這個信號的清晰度被用於觸發語音偵測。
<b>This shows the current speech detection settings.</b><br />You can change the settings from the Settings dialog or from the Audio Wizard.
<b>顯示目前語音偵測設定。</b><br />你能在設定對話框或音頻精靈裡修改目前設定。
Signal values below this count as silence
訊號小於此值時視為靜音
Maximum bandwidth used for sending audio
發送語音時可用的最大頻寬
Use Amplitude based speech detection
使用基於振幅的語音檢測
<b>This selects how long after a perceived stop in speech transmission should continue.</b><br />Set this higher if your voice breaks up when you speak (seen by a rapidly blinking voice icon next to your name).
Exclusive mode
排除模式
<b>This opens the device in exclusive mode.</b><br />No other application will be able to use the device.
<b>選擇的裝置將使用獨占模式。</b><br />獨占時其他應用程式將無法使用此裝置。
Exclusive
獨占模式
R&eset
重設(&E)
&Browse...
瀏覽(&B)...
B&rowse...
瀏覽(&r)...
&Preview
預覽(&P)
<b>Preview</b><br/>Plays the current <i>on</i> sound followed by the current <i>off</i> sound.
<b>預覽</b>播放目前<i>開始</i>音效接著播放目前<i>停止</i>音效。
Displays an always on top window with a push to talk button in it
按鍵發話鈕永遠顯示在最上層
Display push to talk window
顯示按鍵發話視窗
Misc
雜項
Audible audio cue when starting or stopping to transmit
當開始或停止傳送時發出聽得見的提示音效
<b>This enables transmission audio cues.</b><br />Setting this will give you a short audio beep when you start and stop transmitting.
Audio cue
提示音效
Gets played when starting to transmit
開始發送時播放
Gets played when stopping to transmit
停止發送時播放
Hold Time
保持時間
Time the microphone stays open after the PTT key is released
隨按即說鍵放開後保持麥克風持續開啟的時間
Server maximum network bandwidth is only %1 kbit/s. Audio quality auto-adjusted to %2 kbit/s (%3 ms)
伺服器最大可用頻寬為 %1 kbit/s,語音品質自動調整為 %2 kbit/s (%3 毫秒)
Max. Amplification
放大上限
Idle action
閒置動作
minutes do
分鐘後
nothing
無動作
deafen
靜音
mute
關閉麥克風
after
經過
Echo Cancellation
取消回音
The idle action will be reversed upon any key or mouse button input
Undo Idle action upon activity
Audio input
<b>This is the input method to use for audio.</b>
Enable Opus' low-delay mode when the quality is set to <b>64 kb/s</b> or higher.
If checked, Mumble will enable Opus' low-delay mode when the quality is set to <b>64 kbit/s</b> or higher. Low-delay mode decreases latency by <b>~15 milliseconds</b> in the round trip. This mode may require an higher bitrate to preserve the same quality, in comparison with the music and VOIP modes.
Allow low delay mode
Don't use noise suppression.
Use the noise suppression algorithm provided by Speex.
Use the noise suppression algorithm provided by RNNoise.
Use a combination of Speex and RNNoise to do noise suppression.
Both
This controls the amount by which Speex will suppress noise.
Speex suppression strength
AudioInputDialog
Continuous
連續
Voice Activity
語音活動
Push To Talk
按鍵發話
Audio Input
音效輸入
%1 ms
%1 毫秒
Off
關閉
%1 s
%1 秒
%1 kb/s
%1 kb/s
-%1 dB
-%1 分貝
%1 kbit/s (Audio %2, Position %4, Overhead %3)
%1 kbit/s (音效 %2, 位置 %4, 傳輸耗消 %3)
Audio system
Input device
Echo cancellation mode
Transmission mode
PTT lock threshold
PTT hold threshold
Silence below
Current speech detection chance
Speech above
Speech below
Audio per packet
封包音框數
Quality of compression (peak bandwidth)
壓縮品質(峰值頻寬)
Noise suppression
雜訊抑制
Maximum amplification
Transmission started sound
Transmission stopped sound
Initiate idle action after (in minutes)
Idle action
閒置動作
Access to the microphone was denied. Please allow Mumble to use the microphone by changing the settings in System Preferences -> Security & Privacy -> Privacy -> Microphone.
Access to the microphone was denied. Please check that your operating system's microphone settings allow Mumble to use the microphone.
Disabled
停用
Disable echo cancellation.
AudioOutput
Interface
界面
System
系統
Output method for audio
音效輸出方式
Device
裝置
Output device for audio
音效輸出使用的裝置
<b>This is the output device to use for audio.</b>
<b>音效輸出使用的裝置。</b>
Positional Audio
聲音定位
Audio Output
音效輸出
Default &Jitter Buffer
預設語音緩衝(&J)
Safety margin for jitter buffer
語音緩衝的安全邊界
<b>This sets the minimum safety margin for the jitter buffer.</b><br />All incoming audio is buffered, and the jitter buffer continually tries to push the buffer to the minimum sustainable by your network, so latency can be as low as possible. This sets the minimum buffer size to use. If the start of sentences you hear is very jittery, increase this value.
<b>設定語音的最小值。</b><br />緩衝機制在於強化語音品質,克服延遲抖動(Jitter)與封包丟失(Packet Drop)等網路損壞情況。設定緩衝區的最小值。如果你聽到的語音起始部分是顫音,請增加這個值。
Minimum distance to user before sound volume decreases
This sets the minimum distance for sound calculations. The volume of other users' speech will not decrease until they are at least this far away from you.
This sets the maximum distance for sound calculations. When farther away than this, other users' speech volume will not decrease any further.
<b>This enables one of the loopback test modes.</b><br /><i>None</i> - Loopback disabled<br /><i>Local</i> - Emulate a local server.<br /><i>Server</i> - Request loopback from server.<br />Please note than when loopback is enabled, no other users will hear your voice. This setting is not saved on application exit.
<b>啟用一個迴路測試模式.</b><br /><i>不使用</i> - 停用迴路<br /><i>本地伺服器</i> - 模擬一台本地伺服器.<br /><i>伺服器</i> - 連接到伺服器執行測試<br />請注意,執行迴路測試時其他使用者將不會聽到你的聲音,離開時此設定值將不會被儲存。
Volume
語音音量
Volume of incoming speech
收到語音的音量
<b>This adjusts the volume of incoming speech.</b><br />Note that if you increase this beyond 100%, audio will be distorted.
<b>調整收到語音的音量。</b><br />注意如果此數值超過 100%,聲音會失真。
Output Delay
輸出延遲
Amount of data to buffer
語音緩衝大小
The connected "speakers" are actually headphones
The connected "speakers" are actually headphones.
使用耳機
Factor for sound volume decrease
音量減弱因子
Bloom
音量增強
Factor for sound volume increase
音量增強因子
How much should sound volume increase for sources that are really close?
當音源距離過近時音量增強上限?
Checking this indicates that you don't have speakers connected, just headphones. This is important, as speakers are usually in front of you, while headphones are directly to your left/right.
選擇此項表示你使用的揚聲器是耳機而非喇叭。這很重要,因為喇叭通常放置在你面前,而耳機直接在你左右。
This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn't cause rapid jitter in the sound.
Headphones
耳機
Minimum Distance
最小距離
Maximum Distance
最大距離
Maximum distance, beyond which speech volume won't decrease
超過最大距離時音量將不再減弱
Minimum Volume
最小音量
What should the volume be at the maximum distance?
位於最大距離時的音量大小?
Loopback Test
迴路測試
Delay Variance
封包延遲
Variance in packet latency
封包延遲變化量
<b>This sets the packet latency variance for loopback testing.</b><br />Most audio paths contain some variable latency. This allows you to set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.
<b>This sets the packet latency variance for loopback testing.</b><br />Most audio paths contain some variable latency. This allows you set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.
<b>設置回路測試時的延遲時間變化量。</b><br />大多數音效路徑含有一定的延遲。該選項允許你設置回路測試模式時的參數。例如,如果你設置該值為 15毫秒,將模擬一個 20-35毫秒延遲或一個 80-95毫秒延遲的網路。大多數國內網路的延遲方差啊大概是5毫秒.
Packet Loss
封包遺失
Packet loss for loopback mode
回路模式的封包遺失
<b>This sets the packet loss for loopback mode.</b><br />This will be the ratio of packets lost. Unless your outgoing bandwidth is peaked or there's something wrong with your network connection, this will be 0%
<b>設定回路模式的封包遺失。</b><br />該值為遺失率。除非你的出外的頻寬達到滿載或者你的網路連接有問題,該值會是 0%
&Loopback
迴路(&L)
Desired loopback mode
回路模式
Attenuate applications by...
干擾抑制...
Attenuation of other applications during speech
講話時降低其他應用程式的音量
<b>Attenuate volume of other applications during speech</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This sets the attenuation of other applications if the feature is enabled.
If checked Mumble lowers the volume of other applications while other users talk
選用時,當其他使用者講話時 Mumble 將降低其他應用程式音量
<b>Attenuate applications while other users talk</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while other users talk to you.
while other users talk
其他使用者發話時啟用
If checked Mumble lowers the volume of other applications while you talk
選用時,當你講話時 Mumble 將降低其他應用程式音量
<b>Attenuate applications while you talk</b><br />Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while you talk.
while you talk
自己講話時啟用
Exclusive mode, not recommended.
獨占模式,不推薦使用。
<b>This opens the device in exclusive mode.</b><br />No other application will be able to use the device.
<b>選擇的裝置將使用獨占模式。</b><br />獨占時其他應用程式將無法使用此裝置。
Exclusive
獨占模式
If checked Mumble lowers the volume of other users while you talk if you have the "Priority Speaker" status.
If checked, Mumble will only attenuate applications that are using the same output source as Mumble
<b>Attenuate only applications using the same output as Mumble</b><br />If checked, applications that use a different output than Mumble will not be attenuated.
Only attenuate applications using the same output device
If checked, PulseAudio loopback modules will be attenuated
<b>Attenuate PulseAudio loopback modules</b><br />If loopback modules are linked to Mumble's output device/sink, they will also be attenuated.
Attenuate PulseAudio loopback modules
Audio output
<b>This is the output method to use for audio.</b>
<b>Attenuate other users while talking as Priority Speaker</b><br />Mumble supports decreasing the volume of other users while you talk as the <i>Priority Speaker</i> to avoid getting disturbed. Checking this checkbox will enable this feature.
Attenuate other users while talking as Priority Speaker
Enable
Attenuation
AudioOutputDialog
None
無
Local
本地
Server
伺服器
Audio Output
音效輸出
%1 ms
%1 毫秒
%1 %
%1 %
%1 m
%1 m
Output system
Output device
Default jitter buffer
Volume of incoming speech
收到語音的音量
Output delay
Attenuation of other applications during speech
講話時降低其他應用程式的音量
Minimum distance
Maximum distance
Minimum volume
Bloom
音量增強
Delay variance
Packet loss
封包遺失
Loopback
AudioOutputSample
Choose sound file
選擇音效檔
Invalid sound file
無效音效檔
The file '%1' cannot be used by Mumble. Please select a file with a compatible format and encoding.
Mumble無法使用 %1 。請選擇可相容的檔案格式與編碼方式。
AudioStats
>1000 ms
>1000ms
>1000毫秒
Audio Statistics
音效統計
Input Levels
輸入位準
Peak microphone level
麥克風位準
Peak power in last frame
最後遜框的尖峰傳輸率
This shows the peak power in the last frame (20 ms), and is the same measurement as you would usually find displayed as "input power". Please disregard this and look at <b>Microphone power</b> instead, which is much more steady and disregards outliers.
Peak speaker level
揚聲器位準
This shows the peak power of the speakers in the last frame (20 ms). Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you're playing audio from other programs, your setup is not working.
This shows the peak power in the last frame (20 ms) of the speakers. Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you're playing audio from other programs, your setup is not working.
Peak clean level
淨輸入位準
This shows the peak power in the last frame (20 ms) after all processing. Ideally, this should be -96 dB when you're not talking. In reality, a sound studio should see -60 dB, and you should hopefully see somewhere around -20 dB. When you are talking, this should rise to somewhere between -5 and -10 dB.<br />If you are using echo cancellation, and this rises to more than -15 dB when you're not talking, your setup is not working, and you'll annoy other users with echoes.
Signal Analysis
訊號分析
Microphone power
麥克風功率
How close the current input level is to ideal
當前輸入級別離完美有多近
This shows how close your current input volume is to the ideal. To adjust your microphone level, open whatever program you use to adjust the recording volume, and look at the value here while talking.<br /><b>Talk loud, as you would when you're upset over getting fragged by a noob.</b><br />Adjust the volume until this value is close to 100%, but make sure it doesn't go above. If it does go above, you are likely to get clipping in parts of your speech, which will degrade sound quality.
Signal-To-Noise ratio
訊噪比
Signal-To-Noise ratio from the microphone
麥克風的信噪音比
This is the Signal-To-Noise Ratio (SNR) of the microphone in the last frame (20 ms). It shows how much clearer the voice is compared to the noise.<br />If this value is below 1.0, there's more noise than voice in the signal, and so quality is reduced.<br />There is no upper limit to this value, but don't expect to see much above 40-50 without a sound studio.
Speech Probability
語音的概率
Probability of speech
語音的概率
This is the probability that the last frame (20 ms) was speech and not environment noise.<br />Voice activity transmission depends on this being right. The trick with this is that the middle of a sentence is always detected as speech; the problem is the pauses between words and the start of speech. It's hard to distinguish a sigh from a word starting with 'h'.<br />If this is in bold font, it means Mumble is currently transmitting (if you're connected).
Configuration feedback
設定回饋
Current audio bitrate
目前音效位元率
Bitrate of last frame
最後音效訊框的位元率
DoublePush interval
兩次按鍵時間間隔
Time between last two Push-To-Talk presses
鎖定按鍵發話功能的時間間隔
Speech Detection
語音偵測
Current speech detection chance
目前語音偵測機率
<b>This shows the current speech detection settings.</b><br />You can change the settings from the Settings dialog or from the Audio Wizard.
<b>顯示目前語音偵測設定。</b><br />你能在設定對話框或音效精靈裡修改目前設定。
Signal and noise power spectrum
訊號和噪音功率頻譜
Power spectrum of input signal and noise estimate
輸入訊號和噪音估計的功率頻譜
This shows the power spectrum of the current input signal (red line) and the current noise estimate (filled blue).<br />All amplitudes are multiplied by 30 to show the interesting parts (how much more signal than noise is present in each waveband).<br />This is probably only of interest if you're trying to fine-tune noise conditions on your microphone. Under good conditions, there should be just a tiny flutter of blue at the bottom. If the blue is more than halfway up on the graph, you have a seriously noisy environment.
Echo Analysis
回音分析
Weights of the echo canceller
回聲抵消器的影響
This shows the weights of the echo canceller, with time increasing downwards and frequency increasing to the right.<br />Ideally, this should be black, indicating no echo exists at all. More commonly, you'll have one or more horizontal stripes of bluish color representing time delayed echo. You should be able to see the weights updated in real time.<br />Please note that as long as you have nothing to echo off, you won't see much useful data here. Play some music and things should stabilize. <br />You can choose to view the real or imaginary parts of the frequency-domain weights, or alternately the computed modulus and phase. The most useful of these will likely be modulus, which is the amplitude of the echo, and shows you how much of the outgoing signal is being removed at that time step. The other viewing modes are mostly useful to people who want to tune the echo cancellation algorithms.<br />Please note: If the entire image fluctuates massively while in modulus mode, the echo canceller fails to find any correlation whatsoever between the two input sources (speakers and microphone). Either you have a very long delay on the echo, or one of the input sources is configured wrong.
This is the audio bitrate of the last compressed frame (20 ms), and as such will jump up and down as the VBR adjusts the quality. The peak bitrate can be adjusted in the Settings dialog.
AudioWizard
Audio Tuning Wizard
音效設定精靈
Introduction
介紹
Welcome to the Mumble Audio Wizard
歡迎使用 Mumble 音效精靈
Finished
完成
Enjoy using Mumble
Mumble 祝您使用愉快
Device selection
選擇裝置
Selecting the input and output device to use with Mumble.
選擇 Mumble 用來輸入和輸出的裝置。
This is the device your microphone is connected to.
與麥克風連接的裝置。
System
系統
Input method for audio
音效輸入方法
Device
裝置
Input device to use
使用的輸入裝置
<b>Selects which sound card to use for audio input.</b>
<b>選擇用於音效輸入的音效卡。</b>
Cancel echo from headset or speakers
抑制來自耳機或喇叭的回音
Use echo cancellation
使用迴音消除
This enables echo cancellation of outgoing audio, which helps both on speakers and on headsets.
啟用送出音效的迴音消除,這在喇叭和耳機上都有幫助。
This is the device your speakers or headphones are connected to.
與喇叭或耳機連接的裝置。
Output method for audio
音效輸出方式
Output device to use
使用的輸出裝置
<b>Selects which sound card to use for audio Output.</b>
<b>選擇輸出音效的音效卡。</b>
Enable positional audio
啟用音效定位
Allows positioning of sound
Allows positioning of sound.
允許音效定位
Input Device
輸入裝置
Output Device
輸出裝置
This allows Mumble to use positional audio to place voices.
這允許 Mumble 使用聲音定位來放置語音。
<p>
To keep latency to an absolute minimum, it's important to buffer as little audio as possible on the soundcard. However, many soundcards report that they require a much smaller buffer than what they can actually work with, so the only way to set this value is to try and fail.
</p>
<p>
You should hear a voice sample. Change the slider below to the lowest value which gives <b>no</b> interruptions or jitter in the sound. Please note that local echo is disabled during this test.
</p>
<p>
為了讓語音的延遲降到最低,我們希望音效卡中的緩衝越低越好。然而很多音效卡在極低的緩衝下看起來依舊在工作, 因此我們只能試出一個音效卡能接受的最小值。
</p>
<p>
你會聽到一段音效樣本。拉動下方的滑桿,在音效不會中斷破碎或卡住的情況下,盡可能調低。
</p>
Amount of data to buffer
緩衝資料大小
This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn't cause rapid jitter in the sound.
<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the blue and green but <b>not</b> the red zone while you speak.
</p>
<p>
打開你的錄音裝置控制面板,確定麥克風輸入已經啟用並將麥克風音量調到最大。如果有『麥克風增量』選項,請確認該選項已開啟。
</p>
<p>
大聲說話,就像你破口大罵時的樣子。接者降低錄音裝置控制面板中的麥克風音量,使你正常說話時下方的音量條處於藍色與綠色部份盡可能接近紅色區塊的位置,但是又不會到達紅色區塊。
</p>
Positional Audio
定位音頻
Adjusting attenuation of positional audio.
調節定位音頻的衰減量.
Use headphones instead of speakers
使用耳機而不是喇叭
<p>
Congratulations. You should now be ready to enjoy a richer sound experience with Mumble.
</p>
<p>
Mumble is under continuous development, and the development team wants to focus on the features that benefit the most users. To this end, Mumble supports submitting anonymous statistics about your configuration to the developers. These statistics are essential for future development, and also make sure the features you use aren't deprecated.
</p>
<p>
恭喜你,好好享受 Mumble 帶來的絕妙體驗吧!
</p>
<p>
Mumble 尚在持續開發中,開發人員希望知道使用者的需求。Mumble 可以向開發人員發送匿名資料,這對日後的專案發展非常重要。
</p>
Use headphones
使用耳機
This ignores the OS speaker configuration and configures the positioning for headphones instead.
這將忽略操作系統的揚聲器配置并為耳機配置音頻定位.
Volume tuning
音量調節
Tuning microphone hardware volume to optimal settings.
調節麥克風硬件音量到最佳設置。
Now talk softly, as you would when talking late at night and you don't want to disturb anyone. Adjust the slider below so that the bar moves into green when you talk, but stays blue while you're silent.
現在輕聲講話,就像你在深夜時不想打擾任何人一樣。調節下面的滑塊直到下面的進度條在你講話時進入綠區,在你停止說話的時停留在藍區。
Voice Activity Detection
語言活動檢測
Letting Mumble figure out when you're talking and when you're silent.
讓 Mumble 分辨出你是在說話還是保持安靜.
This will help Mumble figure out when you are talking. The first step is selecting which data value to use.
這將幫助 Mumble 知道你是在講話。第一步是選擇用哪個數據值。
Raw amplitude from input
輸入的原始振幅
Signal-To-Noise ratio
信噪比
Next you need to adjust the following slider. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you're not talking, everything should be in the red (definitively not speech).
Next you need to adjust the following two sliders. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you're not talking, everything should be in the red (definitively not speech).
下一步你需要調節下面兩個滑塊。你最初講几句話時進度條應該停留在綠區(確定是講話)。當你講話時,進度條應該停留在黃區(可能是講話)﹔當你沒講話時,進度條應該停留在紅區(明確沒在講話).
Device tuning
裝置調整
Changing hardware output delays to their minimum value.
修改硬體輸出延遲到最小值。
Submit anonymous statistics to the Mumble project
發送匿名統計給 Mumble 專案
Push To Talk:
按鍵發話:
Quality & Notifications
品質與通知
Adjust quality and notification settings.
品質調整與通知設定。
Quality settings
品質設定
Low
低
Balanced
平衡
Notification settings
通知設定
Use Text-To-Speech to read notifications and messages to you.
使用文字轉語音功能讀取給您的通知與訊息。
Disable Text-To-Speech and use sounds instead.
停用文字轉語音並使用音效代替。
%1 ms
%1 毫秒
Enables attenuation of other applications while users talk to you
當使用者對你講話時降低其他程式的音量
Attenuate applications while other users talk
當 Mumble 偵測到通訊活動時降低其他應用程式音量
High
高
Custom
自訂
You already set a customized quality configuration in Mumble. Select this setting to keep it.
如果您已自行設定 Mumble 的音質,請選擇此項不予更動設定。
Enables attenuation of other applications while users talk to you. This means that as soon someone starts to speak to you in Mumble, the sound of all other applications (like audio players) will get attenuated so you can hear them more clearly.
當其他使用者對您發話時降低其他程式音量。這是只當有人在 Mumble 中向您發話時,其他執行中的程式(像是音樂播放器之類)將會被降低音量,使您能聽到更清楚的訊息。
Apply some high contrast optimizations for visually impaired users
允許視障使用者使用高對比色彩配置
Use high contrast graphics
使用高對比圖形
Keep custom Text-To-Speech settings.
維持文字轉語音的自訂方案。
<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but <b>not</b> the crisscrossed zone while you speak.
</p>
<p>
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there's an option to enable a "Microphone boost" make sure it's checked.
</p>
<p>
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but <b>not</b> the criss-crossed zone while you speak.
</p>
For high contrast mode
<p> 打開你的錄音裝置控制面板,確定麥克風輸入已經啟用並將麥克風音量調到最大。如果有『麥克風增量』選項,請確認該選項已開啟。 </p> <p> 大聲說話,就像你破口大罵時的樣子。接者降低你錄音裝置控制面板中的麥克風音量,使你正常說話時下方的音量條處於藍色與綠色部份盡可能接近紅色區塊的位置,但又不會到達紅色區塊。 </p>
Now talk softly, as you would when talking late at night and you don't want to disturb anyone. Adjust the slider below so that the bar moves into empty zone when you talk, but stays in the striped one while you're silent.
For high contrast mode
現在輕聲講話,就像你在深夜時不想打擾任何人一樣。調節下面的滑塊直到下面的進度條在你講話時進入綠區,而在你關閉麥克風時停留在藍區。
Next you need to adjust the following slider. The first few utterances you say should end up in the empty area (definitive speech). While talking, you should stay inside the striped (might be speech) and when you're not talking, everything should be in the crisscrossed (definitively not speech).
For high contrast mode
下一步你需要調節下面兩個滑塊。你最初講幾句話時進度條應該停留在綠區(確定是講話)。當你講話時,進度條應該停留在黃區(可能是講話)﹔當你沒講話時,進度條應該停留在紅區(明確沒在講話).
In this configuration Mumble will use a <b>low amount of bandwidth</b>. This will inevitably result in high latency and poor quality. Choose this only if your connection cannot handle the other settings. (16kbit/s, 60ms per packet)
選此設定 Mumble 會盡可能降低頻寬的使用量,這將提高音效延遲與降低語音品質,只在你的網路環境差到極點時才選擇此項。(16kbit/s,封包間隔60毫秒)
This is the <b>recommended default</b> configuration. It provides a good balance between quality, latency, and bandwidth usage. (40kbit/s, 20ms per packet)
這是<b>推薦的預設選項</b>,它在音質、延遲與頻寬的使用上取得了一個很好的平衡。(40kbit/s,封包間隔20毫秒)
This configuration is only recommended for use in setups where bandwidth is not an issue, like a LAN. It provides the lowest latency supported by Mumble and <b>high quality</b>. (72kbit/s, 10ms per packet)
此選項只建議使用在頻寬充裕的環境,Mumble將提供最低延遲與最好的品質。(72kbit/s, 封包間隔10毫秒)
<b>This is the input method to use for audio.</b>
<b>This is the Output method to use for audio.</b>
<html><head/><body><p>This is the audio tuning wizard for Mumble. This will help you correctly set the input levels of your sound card, and also set the correct parameters for sound processing in Mumble. </p><p>Please be aware that as long as this wizard is active, audio will be looped locally to allow you to listen to it, and no audio will be sent to the server. </p><p>Note that you can cancel this wizard at any time without it having an effect on your current audio systems. The settings are only once this wizard has been completed.</p></body></html>
<html><head/><body><p>Mumble supports positional audio for some games, and will position the voice of other users relative to their position in game. Depending on their position, the volume of the voice will be changed between the speakers to simulate the direction and distance the other user is at. Such positioning depends on your speaker configuration being correct in your operating system, so a test is done here. </p><p>The graph below shows the position of <span style=" color:#56b4e9;">you</span>, the <span style=" color:#d55e00;">speakers</span> and a <span style=" color:#009e73;">moving sound source</span> as if seen from above. You should hear the audio move between the channels. </p><p>You can also use your mouse to position the <span style=" color:#009e73;">sound source</span> manually.</p></body></html>
Input system
Input device
Output system
Output device
Output delay
Maximum amplification
VAD level
PTT shortcut
No buttons assigned
BanEditor
Mumble - Edit Bans
Mumble - 編輯黑名單
&Address
IP位置(&A)
&Mask
子網路遮罩(&M)
Reason
原因
Start
開始
End
結束
User
使用者
Hash
雜湊值
&Add
新增(&A)
&Update
更新(&U)
&Remove
刪除(&R)
Ban List
封鎖名單
Search field
搜尋欄
This is the search field. Use it to find bans that have this username set in the username field.
這個是搜尋條件。用來搜尋並封鎖擁有相似文字片段的使用者名稱。
Who are you looking for?
你在找誰?
No nickname
沒有暱稱
IP address
IP 位置
No IP address
沒有 IP 位置
Reason for the ban
封鎖理由
No reason
沒有理由
Ban end date
封鎖結束時間
Ban end date. If you set the same date for start and end, the ban will be permanent (it will not expire).
封鎖結束時間。如果開始與結束時間相同,表示永久封鎖 (將不會過期)。
Certificate hash
憑證雜湊值
No certificate hash
沒有憑證雜湊值
Banned users
被封鎖的使用者
This is a list with banned users.
這是封鎖使用者名單。
Use this button if you want to add a new ban.
點擊此新增封鎖對象。
Use this button if you want to update ban information.
點此更新封鎖資訊。
Use this button if you want to remove user from the ban list.
點此將使用者自封鎖名單中刪除。
Clear all fields
清除所有條件
This button clears all fields. Use it if you want to add a new ban.
本按鈕將清除所有條件。如果您需要增加封鎖對象請點擊此鈕。
Clear
清除
Ban List - %n Ban(s)
封鎖清單 - %n 封鎖
Search
IP Address
IP位置
Mask
Start date/time
End date/time
CertView
Name
姓名
Email
電子郵件
Issuer
發行人
Expiry Date
有效期限
(none)
(none)
Self-signed
自簽名
CertWizard
Unable to validate email.<br />Enter a valid (or blank) email to continue.
無法驗證電子郵件。<br />輸入正確的電子信箱地址或留白繼續下一步。
There was an error generating your certificate.<br />Please try again.
產生憑證時發生錯誤。<br />請重試。
Your certificate and key could not be exported to PKCS#12 format. There might be an error in your certificate.
你的憑證與金鑰無法依 PKCS#12 格式輸出。也許你的憑證有誤。
The file could not be opened for writing. Please use another file.
無法寫入,請選擇其他檔案。
The file's permissions could not be set. No certificate and key has been written. Please use another file.
無法設定檔案權限。無法寫入憑證或密鑰。請更換檔案。
The file could not be written successfully. Please use another file.
寫入失敗,請選擇其他檔案。
The file could not be opened for reading. Please use another file.
檔案無法開啟或讀取,請選擇其他檔案。
The file is empty or could not be read. Please use another file.
此為空檔案或無法讀取,請選擇其他檔案。
The file did not contain a valid certificate and key. Please use another file.
檔案不含有效憑證與金鑰,請選擇其他檔案。
Select file to export certificate to
選擇導出憑證到
Select file to import certificate from
選擇匯入憑證自
Unable to import. Missing password or incompatible file type.
<b>Certificate Expiry:</b> Your certificate is about to expire. You need to renew it, or you will no longer be able to connect to servers you are registered on.
<b>憑證到期:</b> 您的憑證即將到期。你需要更新它,否則將不能夠連接到您已註冊的伺服器上。
Current certificate
目前的憑證
Certificate file to import
Certificate password
Certificate to import
匯入的憑證
New certificate
新憑證
File to export certificate to
Email address
Your name
Certificates
Certificate Management
憑證管理
Certificate Authentication
憑證認證
Authenticating to servers without using passwords
連接伺服器不使用密碼驗證
Current certificate
目前的憑證
This is the certificate Mumble currently uses.
Mumble 目前使用的憑證。
Current Certificate
目前的憑證
Create a new certificate
建立新憑證
This will create a new certificate.
此選項將建立新憑證。
Import certificate from file
從檔案匯入憑證
This will import a certificate from file.
此選項將匯入憑證。
Import a certificate
匯入憑證
Export Certificate
匯出憑證
This will export a certificate to file.
此選項將會出憑證至檔案。
Export current certificate
匯出目前憑證
Import Certificate
匯入憑證
PKCS #12 Certificate import
匯入 PKCS #12憑證
<p>Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from Firefox, Internet Explorer, Opera etc.</p><p>If the file is password protected, you will need the password to import the certificate.</p>
<p>Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from FireFox, Internet Explorer, Opera etc.</p><p>If the file is password protected, you will need the password to import the certificate.</p>
<p>Mumble 可以匯入 PKCS #12 格式的憑證。不只 Mumble 在匯出時使用這種格式,包含 Firefox、Internet Explorer 還有 Opera 等等也是使用這種格式。</p><p>如果憑證有設定保護密碼,當您匯入憑證時需要輸入該密碼。</p>
Import from
匯入自
Filename to import from
匯入的檔案名稱
This is the filename you wish to import a certificate from.
你希望匯入的檔案名稱。
Select file to import from
選擇匯入的檔案來源
This opens a file selection dialog to choose a file to import a certificate from.
開啟對話框選擇即將匯入的憑證。
Open...
開啟...
Password
密碼
Password for PKCS#12 file
PKCS#12 檔案密碼
This is the password for the PKCS#12 file containing your certificate.
這是包含密碼的 PKCS#12 憑證。
Certificate to import
匯入的憑證
This is the certificate you are importing.
這是正在匯入的憑證。
Certificate Details
憑證詳細資訊
Replace Certificate
置換憑證
Replace existing certificate with new certificate?
使用新憑證置換現存憑證?
<p>You already have a certificate stored in Mumble, and you are about to replace it.</p>
<p>If you are upgrading to a certificate issued to you by a trusted CA and the email addresses match your current certificate, this is completely safe, and servers you connect to will automatically recognize the strong certificate for your email address.
</p>
<p>If this is not the case, you will no longer be recognized by any server you previously have authenticated with. If you haven't been registered on any server yet, this is nothing to worry about.
</p>
<p>
Are you sure you wish to replace your certificate?
</p>
This is the certificate Mumble currently uses. It will be replaced.
這是 Mumble正在使用的憑證,即將被置換。
New certificate
新憑證
This is the new certificate that will replace the old one.
就憑證將被置換為新憑證。
New Certificate
新憑證
Make a backup of your certificate
建立憑證備份
Export to
匯出到
Filename to export to
匯出的檔案名稱
This is the filename you wish to export a certificate to.
你希望匯出的檔案名稱。
Save As...
另存成...
This is the certificate Mumble currently uses. It will be exported.
即將匯出 Mumble 目前使用的憑證。
Generate a new certificate for strong authentication
建立高強度憑證
<p>Mumble will now generate a strong certificate for authentication to servers.</p><p>If you wish, you may provide some additional information to be stored in the certificate, which will be presented to servers when you connect. If you provide a valid email address, you can upgrade to a CA issued email certificate later on, which provides strong identification.</p>
Name
名稱
Email
Email
Your email address (e.g. johndoe@mumble.info)
你的電子郵件位址 (例: johndoe@mumble.info)
This is your email address. It is strongly recommended to provide a valid email address, as this will allow you to upgrade to a strong certificate without authentication problems.
你的電子信箱地址。這裡強烈建議您使用正確的信箱地址,以便讓您升級成高強度憑證免於認證問題。
Your name (e.g. John Doe)
你的姓名 (例:John Doe)
This is your name, and will be filled out in the certificate. This field is entirely optional.
你的大名,將填寫於憑證中,此項目可留白。
Finish
完成
Certificate-based authentication is ready for use
以憑證為基礎的認證方式已經準備好可以使用了
Enjoy using Mumble with strong authentication.
在強驗證之下享受 Mumble。
Automatic certificate creation
自動建立憑證
<p>If you ever lose your current certificate, which will happen if your computer suffers a hardware failure or you reinstall your machine, you will no longer be able to authenticate to any server you are registered on. It is therefore <b>mandatory</b> that you make a backup of your certificate. We strongly recommend you store this backup on removable storage, such as a USB flash drive.</p>
<p>Note that this file will not be encrypted, and if anyone gains access to it, they will be able to impersonate you, so take good care of it.</p>
<p>Mumble can use certificates to authenticate with servers. Using certificates avoids passwords, meaning you don't need to disclose any password to the remote site. It also enables very easy user registration and a client side friends list independent of servers.</p><p>While Mumble can work without certificates, the majority of servers will expect you to have one.</p><p>Creating a new certificate automatically is sufficient for most use cases. But Mumble also supports certificates representing trust in the users ownership of an email address. These certificates are issued by third parties. For more information see our <a href="http://mumble.info/certificate.php">user certificate documentation</a>. </p>
ChanACL
None
無
Traverse
路過
Enter
進入
Speak
發言
Mute/Deafen
關閉麥克風/關閉喇叭
Make channel
建立頻道
Make temporary
建立臨時頻道
Link channel
連接頻道
This represents no privileges.
這代表無特權。
This represents total access to the channel, including the ability to change group and ACL information. This privilege implies all other privileges.
允許完整控制頻道,包含變更群組與存取控制表資訊。本權限包含所有其他權限。
This represents the permission to traverse the channel. If a user is denied this privilege, he will be unable to access this channel and any sub-channels in any way, regardless of other permissions in the sub-channels.
允許縱覽頻道。如果一個使用者缺乏此權限,即使他擁有子頻道的權限,也無法進入此頻道以及下屬之子頻道。
This represents the permission to join the channel. If you have a hierarchical channel structure, you might want to give everyone Traverse, but restrict Enter in the root of your hierarchy.
允許進入頻道。如果您擁有較高層次的頻道,您可能會讓使用者路過,但限制他們進入你的根頻道。
This represents the permission to speak in a channel. Users without this privilege will be suppressed by the server (seen as muted), and will be unable to speak until they are unmuted by someone with the appropriate privileges.
允許在頻道發言。使用者缺乏此權限將被伺服器限制發言(看起來像關閉麥克風的),直到具有適當權限的人取消關閉麥克風。
This represents the permission to whisper to this channel from the outside. This works exactly like the <i>speak</i> privilege, but applies to packets spoken with the Whisper key held down. This may be used to broadcast to a hierarchy of channels without linking.
This represents the permission to mute and deafen other users. Once muted, a user will stay muted until he is unmuted by another privileged user or reconnects to the server.
允許使用者將其他人設為關閉麥克風或關閉喇叭。一旦被設為關閉麥克風,將一直保持關閉麥克風狀態到被其他有權限的使用者取消,或重新連線為止。
This represents the permission to move a user to another channel or kick him from the server. To actually move the user, either the moving user must have Move privileges in the destination channel, or the user must normally be allowed to enter the channel. Users with this privilege can move users into channels the target user normally wouldn't have permission to enter.
允許使用者將其他人驅逐到其他頻道或踢出這台伺服器。要驅逐使用者需要擁有目標頻道的移動權限,被驅逐者要有進入目標頻道的權限。擁有此權限的使用者可以將沒有進入某頻道權限的人拉入該頻道。
This represents the permission to make sub-channels. The user making the sub-channel will be added to the admin group of the sub-channel.
允許建立一個子頻道。使用者可以建立一個子頻道並被加入子頻道管理員群組。
This represents the permission to make a temporary subchannel. The user making the sub-channel will be added to the admin group of the sub-channel. Temporary channels are not stored and disappear when the last user leaves.
允許使用者建立一個臨時的子頻道。使用者可以建立一個臨時子頻道並被加入子頻道管理員群組。臨時子頻道不會永久存在,當最後一個使用者離開時,臨時子頻道將會消失。
This represents the permission to link channels. Users in linked channels hear each other, as long as the speaking user has the <i>speak</i> privilege in the channel of the listener. You need the link privilege in both channels to create a link, but just in either channel to remove it.
允許連結頻道。當發言的使用者擁有<i>發言</i>的權限時,被連接的頻道可以聽到彼此的發言,你需要同時擁有兩個頻道的連結權限,但僅擁有一方時可移除連結。
This represents the permission to write text messages to other users in this channel.
允許發送文字訊息給頻道內其他使用者。
This represents the permission to forcibly remove users from the server.
允許強制使用者離開伺服器。
This represents the permission to permanently remove users from the server.
允許永久禁止使用者進入伺服器。
This represents the permission to register and unregister users on the server.
允許使用者在伺服器上註冊與移除註冊。
This represents the permission to register oneself on the server.
允許使用者在伺服器上註冊。
Whisper
悄悄話
Move
移動
Text message
文字訊息
Kick
剔除
Ban
封鎖
Register User
註冊使用者
Register Self
註冊自己
Write ACL
建立存取控制表
This represents the permission to use the listen-feature allowing to listen to a channel without being in it.
Listen
This represents the permission to reset the comment or avatar of a user.
Reset User Content
ChatbarTextEdit
Paste and &Send
Paste and send
貼上與送出(&S)
<center>Type chat message here</center>
<center>在此輸入訊息</center>
Unable to send image: too large.
Unable to send image %1: too large.
This server does not allow sending images.
ClientUser
Friend
朋友
Authenticated
已認證
Priority speaker
優先講者
Recording
錄音
Muted (server)
關閉麥克風 (伺服器)
Deafened (server)
關閉喇叭 (伺服器)
Local Ignore (Text messages)
本地忽略 (文字訊息)
Local Mute
本地關閉麥克風
Muted (self)
關閉麥克風 (自己)
Deafened (self)
關閉喇叭 (自己)
Local Ignore (Text-To-Speech)
ConfigDialog
Accept changes
確定
This button will accept current settings and return to the application.<br />The settings will be stored to disk when you leave the application.
該按鈕將接受當前設定並返回到應用程式。<br />當你退出應用程式時這些設定將被儲存。
Reject changes
取消變更
This button will reject all changes and return to the application.<br />The settings will be reset to the previous positions.
該按鈕將拒絕所有修改並回到應用程式。<br />這些設定將被重置到先前的設定。
Apply changes
套用
This button will immediately apply all changes.
該按鈕將立即套用所有修改。
Undo changes for current page
取消變更。
This button will revert any changes done on the current page to the most recent applied settings.
該按鈕將復原對當前頁的任意修改到最近使用的設置。
Restore defaults for current page
恢復預設值
Mumble Configuration
Mumble 設定
Configuration categories
This button will restore the defaults for the settings on the current page. Other pages will not be changed.<br />To restore all settings to their defaults, you can press the "Defaults (All)" button.
Restore all defaults
This button will restore the defaults for all settings.
Defaults (All)
ConnectDialog
Connecting to %1
正在連接到 %1
Enter username
輸入帳號
Servername
伺服器名稱
Unknown
Users
使用者
Failed to fetch server list
無法抓取伺服器清單
Mumble Server Connect
Mumble 伺服器連線
Ping
反應時間
Remove from Favorites
從我的最愛中刪除
Add custom server
新增自訂伺服器
&Copy
複製(&C)
Copy favorite link to clipboard
複製我的最愛連結到剪貼簿
&Paste
貼上(&P)
Paste favorite from clipboard
從剪貼簿貼上我的最愛連結
&Edit...
編輯(&E)...
&Add New...
新增伺服器(&A)...
Add to &Favorites
新增到我的最愛(&F)
Open &Webpage
開啟網頁(&W)
Server list
Search
Location
Filter
過濾
Show All
Show Populated
Show Reachable
All
全部
Africa
Asia
Europe
North America
Oceania
South America
Consent to the transmission of private data
<p>To measure the latency (ping) of public servers and determine the number of active users, your IP address must be transmitted to each public server.</p><p>Do you consent to the transmission of your IP address? If you answer no, the public server list will be deactivated. However, you can reactivate it at any time in the network settings.</p>
C&onnect
連線(&C)
Adding host %1
正在新增主機 %1
Hostname
主機名稱
Bonjour name
Bonjour 名稱
Port
埠號
Addresses
網址
Website
網站
Packet loss
封包遺失
Ping (80%)
反應時間(80%)
%1 ms
%1 ms
Ping (95%)
反應時間(95%)
Bandwidth
頻寬
%1 kbit/s
%1 kbit/s
Version
版本
ConnectDialogEdit
Edit Server
編輯伺服器
Name of the server
伺服器名稱
A&ddress
網址(&A)
Internet address of the server.
Internet address of the server.
伺服器網址。
<b>Address</b><br/>
Internet address of the server. This can be a normal hostname, an IPv4/IPv6 address or a Bonjour service identifier. Bonjour service identifiers have to be prefixed with a '@' to be recognized by Mumble.
<b>Address</b></br>
Internet address of the server. This can be a normal hostname, an ipv4/6 address or a bonjour service identifier. Bonjour service identifiers have to be prefixed with a '@' to be recognized by Mumble.
<b>網址</b><br/>
伺服器的網路位置。可以是一般的主機名稱、一個 IPv4/IPv6 位置或者是一個 Bonjour 服務的標誌。 Bonjour 服務帶有 '@' 前綴的標誌可以被 Mumble 認可。
&Port
埠號(&P)
Port on which the server is listening
伺服器監聽的埠號
<b>Port</b><br/>
Port on which the server is listening. If the server is identified by a Bonjour service identifier this field will be ignored.
<b>埠</b><br/>
伺服器使用的監聽埠。如果伺服器標記使用 Bonjour 服務,此欄位將被忽略。
&Username
帳號(&U)
Username to send to the server
發送給伺服器的使用者名稱
<b>Username</b><br/>
Username to send to the server. Be aware that the server can impose restrictions on how a username might look like. Also your username could already be taken by another user.
<b>使用者名稱</b><br/>
發送給伺服器的使用者名稱。請注意該伺服器可能限制使用者名稱的樣式。同時您慣用的名稱可能已被其它人使用。
Label
標籤
Add Server
新增伺服器
You are currently connected to a server.
Do you want to fill the dialog with the connection data of this server?
Host: %1 Port: %2
You have an URL in your clipboard.
Do you want to fill the dialog with this data?
Host: %1 Port: %2
Password
密碼
Password to send to the server
發送給伺服器的密碼
<b>Password</b><br/>
Password to be sent to the server on connect. This password is needed when connecting as <i>SuperUser</i> or to a server using password authentication. If not entered here the password will be queried on connect.
<b>密碼</b><br/>
與伺服器連線時發送的密碼。只有以<i>超級使用者</i>身份登入伺服器時才需要。如果不填寫此欄位,登入時需要填寫密碼。
Show password
顯示密碼
<b>Label</b><br/>
Label of the server. This is what the server will be named like in your server list and can be chosen freely.
<b>標籤</b><br/>
伺服器的標籤。伺服器在你的清單中顯示的名稱,可以自由設定。
Local server label
本地伺服器標籤
127.0.0.1
127.0.0.1
64738
64738
Your username
您的帳號
Your password
您的密碼
&Fill
&Ignore
CrashReporter
Mumble Crash Report
Mumble 當機回報
<p><b>We're terribly sorry, but it seems Mumble has crashed. Do you want to send a crash report to the Mumble developers?</b></p><p>The crash report contains a partial copy of Mumble's memory at the time it crashed, and will help the developers fix the problem.</p>
<p><b>非常抱歉,Mumble當機了。您願意送出當機回報給 Mumble 開發者嗎?</b></p><p>當機回報內容包含 Mumble 當機時的記憶體內容副本,將可協助開發者修復此問題。</p>
Email address (optional)
Email 地址(選填、非必要)
Please describe briefly, in English, what you were doing at the time of the crash
Please briefly describe what you were doing at the time of the crash
請使用英文填寫當機前的那一刻您在做什麼動作
Send Report
送出
Don't send report
不要送出
Crash upload successful
當機回報上傳成功
Thank you for helping make Mumble better!
感謝您的協助讓 Mumble 更完美!
Crash upload failed
當機回報上傳失敗
Uploading crash report
上傳當機回報中
Abort upload
放棄上傳
HTTP error %1: "%2"
Internal error encountered in CrashReporter.cpp: Received network reply does not contain an HTTP status code. Please inform a developer about error code %1
Database
The database '%1' is read-only. Mumble cannot store server settings (i.e. SSL certificates) until you fix this problem.
The database '%1' is read-only. Mumble can not store server settings (ie. SSL certificates) until you fix this problem.
資料庫 '%1' 目前為唯讀狀態。Mumble 無法儲存伺服器設定(例:SSL 憑證) 直到您修復此問題。
The database file '%1' set in the configuration file does not exist. Do you want to create a new database file at this location?
Mumble failed to initialize a database in any of the possible locations.
DeveloperConsole
Developer Console
DockTitleBar
Drag here
拖曳至此
GlobalShortcut
Shortcuts
快速鍵
List of configured shortcuts
設定好的快速鍵清單
Function
功能
Data
資料
Shortcut
快速鍵
Suppress
禁止
Add new shortcut
新增快速鍵
This will add a new global shortcut
即將新增全域的快速鍵
&Add
新增(&A)
Remove selected shortcut
移除快速鍵
This will permanently remove a selected shortcut.
即將永久刪除選定的快速鍵。
&Remove
刪除(&R)
<html><head/><body><p>Mumble can currently only use mouse buttons and keyboard modifier keys (Alt, Ctrl, Cmd, etc.) for global shortcuts.</p><p>If you want more flexibility, you can enable <span style=" font-style:italic;">Access for assistive devices</span> in the system's Accessibility preferences. However, please note that this change also potentially allows malicious programs to read what is typed on your keyboard.</p></body></html>
Open Accessibility Preferences
開啟無障礙選項
Skip
略過
Enable Global Shortcuts
啟用全域快速鍵
<b>Additional Shortcut Engines</b><br />This section allows you to configure the use of additional GlobalShortcut engines.
Additional Shortcut Engines
<b>Enable Windows hooks</b>.<br />This enables the Windows hooks shortcut engine. Using this engine allows Mumble to suppress keypresses and mouse clicks.
Enable Windows hooks
<b>Enable GKey</b>.<br />This setting enables support for the GKey shortcut engine, for "G"-keys found on Logitech keyboards.
Enable GKey
<b>Enable XInput</b><br />This setting enables support for the XInput shortcut engine, for Xbox compatible controllers.
Enable XInput
<b>Enable shortcuts in privileged applications</b>.<br />Also known as "UIAccess". This allows Mumble to receive global shortcut events from programs running at high privilege levels, such as an Admin Command Prompt or older games that run with admin privileges.
<br /><br />
Without this option enabled, using Mumble's global shortcuts in privileged applications will not work. This can seem inconsistent: for example, if the Push-to-Talk button is pressed in a non-privileged program, but released in a privileged application, Mumble will not observe that it has been released and you will continue to talk until you press the Push-to-Talk button again.
Enable shortcuts in privileged applications
GlobalShortcutButtons
Edit shortcut
Start capture process
<html><head/><body><p>Starts the capture process: all buttons you press will be added to the tree.</p><p>Once all buttons are released, the capture process stops automatically.</p></body></html>
Add
新增
Remove the currently selected items
Remove
GlobalShortcutConfig
<html><head/><body><p>Mumble can currently only use mouse buttons and keyboard modifier keys (Alt, Ctrl, Cmd, etc.) for global shortcuts.</p><p>If you want more flexibility, you can add Mumble as a trusted accessibility program in the Security & Privacy section of your Mac's System Preferences.</p><p>In the Security & Privacy preference pane, change to the Privacy tab. Then choose Accessibility (near the bottom) in the list to the left. Finally, add Mumble to the list of trusted accessibility programs.</body></html>
Shortcuts
快速鍵
<b>This is the global shortcut key combination.</b><br />Click this field and then press the desired key/button combo to rebind. Double-click to clear.
<b>This is the global shortcut key combination.</b><br />Double-click this field and then the desired key/button combo to rebind.
<b>這是全域快速鍵組合。</b><br />雙擊該區域然後綁定想要的按鍵/按鈕組合。
Suppress keys from other applications
禁止其他應用程序使用的按鍵
<b>This hides the button presses from other applications.</b><br />Enabling this will hide the button (or the last button of a multi-button combo) from other applications. Note that not all buttons can be suppressed.
<b>向其他應用程序隱藏這些按鍵。</b><br/>允許該選項將向其他應用程序隱藏指定按鍵(或者組合按鍵的最后一個按鍵)。注意并不是所有按鍵都能被禁用。
Configured shortcuts
GlobalShortcutEngine
Unknown
GlobalShortcutMac
Mouse
Keyboard
GlobalShortcutTarget
Whisper Target
悄悄話對象
Channel Target
目標頻道
Restrict to Group
群組限制
If specified, only members of this group will receive the whisper.
如果指定,則只有此群組的成員可接收悄悄話。
List of users
使用者清單
Add
新增
Remove
刪除
Modifiers
修飾
Do not send positional audio information when using this whisper shortcut.
使用快速鍵發送悄悄話時不送出聲音定位資訊。
Ignore positional audio
忽略聲音定位
Shout to Linked channels
對連結的頻道大喊
Shout to subchannels
對子頻道大喊
The whisper will also be transmitted to linked channels.
悄悄話可以發送到所有相連結的頻道。
The whisper will also be sent to the subchannels of the channel target.
悄悄話內容可以發送到目標頻道的所有子頻道。
Shout/Whisper to:
Current selection
When shouting to channel:
Shout to linked channels
Channel
頻道
GlobalShortcutWin
Mouse
Keyboard
GlobalShortcutX
Keyboard
Mouse
JackAudioSystem
Hardware Ports
Mono
Stereo
LCD
Not connected
未連接
LCDConfig
Enable this device
啟用裝置
LCD
LCD
Devices
裝置
Name
名稱
<p>This is the list of available LCD devices on your system. It lists devices by name, but also includes the size of the display. Mumble supports outputting to several LCD devices at a time.</p>
<h3>Size:</h3>
<p>
This field describes the size of an LCD device. The size is given either in pixels (for Graphic LCDs) or in characters (for Character LCDs).</p>
<h3>Enabled:</h3>
<p>This decides whether Mumble should draw to a particular LCD device.</p>
<p>這是您系統上可用的LCD裝置清單。本清單包含裝置名稱與解析度。Mumble 支援同時輸出到數個LCD裝置。</p>
<h3>尺寸:</h3>
<p>
這邊顯示您 LCD 裝置的尺寸。這個尺寸可能使用像素或文字表示。</p>
<h3>啟用:</h3>
<p>Mumble 是否顯示在 LCD 裝置上。</p>
Size
解析度
Enabled
已啟用
Views
檢視
Minimum Column Width
最小列寬
<p>This option decides the minimum width a column in the User View.</p>
<p>If too many people are speaking at once, the User View will split itself into columns. You can use this option to pick a compromise between number of users shown on the LCD, and width of user names.</p>
This setting decides the width of column splitter.
設定列分割線寬度。
Splitter Width
分割線寬度
Minimum column width
Splitter width
ListenerLocalVolumeDialog
Adjusting local volume for listening to %1
Log
Debug
除錯
Critical
緊急
Warning
警告
Information
訊息
Other self-muted/deafened
其他人自我關閉喇叭/關閉麥克風
User recording state changed
使用者錄音狀態改變
User kicked (you or by you)
使用者被(你或因為你)踢出
User kicked
使用者被踢出
You self-muted
您設定關閉麥克風
User muted (you)
使用者關閉(你的)麥克風
User muted (by you)
使用者被關閉麥克風(由你)
User muted (other)
使用者關閉麥克風(其他人)
You self-unmuted
您設定開啟麥克風
You self-deafened
您設定關閉喇叭
You self-undeafened
您設定開啟喇叭
User renamed
使用者已更名
User connected and entered channel
User left channel and disconnected
Private text message
the server
伺服器
[[ Invalid size ]]
[[ Text object too large to display ]]
[[ 顯示的文字物件太大 ]]
[Date changed to %1]
[日期變更為 %1]
link to %1
連接到 %1
FTP link to %1
player link
玩家連結
channel link
頻道連結
%1 link
%1 連結
Server connected
Server disconnected
User joined server
User left server
User joined channel
User left channel
Permission denied
Text message
文字訊息
You joined channel
You joined channel (moved)
User started listening to channel
User stopped listening to channel
Plugin message
LogConfig
Toggle console for %1 events
為 %1 事件啟用控制台
Toggle pop-up notifications for %1 events
%1 事件跳出通知視窗
Toggle Text-To-Speech for %1 events
%1 事件使用文本語音轉換
Click here to toggle sound notification for %1 events
點擊這里為 %1 事件啟用聲音通知
Toggle window highlight (if not active) for %1 events
Path to sound file used for sound notifications in the case of %1 events<br />Single click to play<br />Double-click to change
%1 事件中使用提示音效檔案<br />單點播放音效<br />連按兩下以變更
Click here to toggle console output for %1 events.<br />If checked, this option makes Mumble output all %1 events in its message log.
點擊這裡為 %1 事件啟用控制台輸出。<br />如果選取,該選項使 Mumble 輸出所有 %1 事件到它的訊息日誌。
Click here to toggle pop-up notifications for %1 events.<br />If checked, a notification pop-up will be created by Mumble for every %1 event.
Click here to toggle pop-up notifications for %1 events.<br />If checked, a notification pop-up will be created by mumble for every %1 event.
Click here to toggle window highlight for %1 events.<br />If checked, Mumble's window will be highlighted for every %1 event, if not active.
Path to sound file used for sound notifications in the case of %1 events.<br />Single click to play<br />Double-click to change<br />Ensure that sound notifications for these events are enabled or this field will not have any effect.
Click here to toggle Text-To-Speech for %1 events.<br />If checked, Mumble uses Text-To-Speech to read %1 events out loud to you. Text-To-Speech is also able to read the contents of the event which is not true for sound files. Text-To-Speech and sound files cannot be used at the same time.
Click here to toggle sound notification for %1 events.<br />If checked, Mumble uses a soundfile predefined by you to indicate %1 events. Soundfiles and Text-To-Speech cannot be used at the same time.
點擊這裡為 %1 事件啟用聲音通知。<br />如果選中, Mumble 會使用一個你預先定義的聲音文件來標示 %1 事件。聲音文件和文本語音轉換不能同時被使用。
Click here to toggle sound notification for %1 events.<br />If checked, Mumble uses a sound file predefined by you to indicate %1 events. Sound files and Text-To-Speech cannot be used at the same time.
Path to soundfile used for sound notifications in the case of %1 events.<br />Single click to play<br />Doubleclick to change<br />Be sure that sound notifications for these events are enabled or this field will not have any effect.
Messages
消息
Message
消息
Console
控制台
Notification
通知
Text-To-Speech
文本語音轉換
Soundfile
聲音文件
Path
路徑
Text To Speech
文本語音轉換
Volume
音量
Volume of Text-To-Speech Engine
文本語音轉換引擎的音量
<b>This is the volume used for the speech synthesis.</b>
<b>這是用於語音合成的音量。</b>
Length threshold
長度閾值
Message length threshold for Text-To-Speech Engine
用于文本語音轉換的消息長度閾值
<b>This is the length threshold used for the Text-To-Speech Engine.</b><br />Messages longer than this limit will not be read aloud in their full length.
<b>這是用于文本語音轉換引擎的消息長度閾值。</b><br />消息長于此值時將不會被全部讀出來。
Characters
字元
Whisper
悄悄話
If checked you will only hear whispers from users you added to your friend list.
選擇此項則只有在您好友清單中的使用者才可發送悄悄話給你。
Only accept whispers from friends
只接受好友的悄悄話
If enabled text messages you send will be read back to you with TTS
啟此功能啟用後將使用文本轉語音讀出回傳的訊息。
Read back own messages
回送訊息
Chat Log
聊天紀錄
Maximum chat length
最大聊天長度
Unlimited
無限制
Lines
行
Highlight
If enabled, TTS will not dictate the message scope.
Omit Message Scope
If enabled, TTS will not dictate the message author.
Omit Message Author
If checked the time at the beginning of a message will be displayed in the 24-hour format.
The setting only applies for new messages, the already shown ones will retain the previous time format.
Use 24-hour clock
How far individual messages are spaced out from one another.
Message margins
Log messages
TTS engine volume
Chat message margins
LookConfig
System default
系統預設
None
無
Only with users
只顯示自己所在
All
全部
Ask
詢問
Do Nothing
無動作
Move
移動
<a href="%1">Browse</a>
This link is located next to the theme heading in the ui config and opens the user theme directory
User Interface
使用者界面
This sets which channels to automatically expand. <i>None</i> and <i>All</i> will expand no or all channels, while <i>Only with users</i> will expand and collapse channels as users join and leave them.
This sets which channels to automatically expand. <i>None</i> and <i>All</i> will expand no or all channels, while <i>Only with users</i> will expand and collapse channels as users join and leave them.
List users above subchannels (requires restart).
顯示頻道內使用者清單(需重新啟動)。
<b>If set, users will be shown above subchannels in the channel view.</b><br />A restart of Mumble is required to see the change.
<b>啟用時在各子頻道下將各自顯示使用者名單</b><br />需要重新啟動。
Users above Channels
顯示頻道內使用者清單
<b>If set, will verify you want to quit if connected.</b>
<b>退出程式時如果與伺服器持續連線則進行重複確認。</b>
Show number of users in each channel
顯示每一個頻道的使用人數
Show channel user count
顯示頻道人數
Language
語言
Language to use (requires restart)
使用的語言(需要重啟)
<b>This sets which language Mumble should use.</b><br />You have to restart Mumble to use the new language.
<b>設置 Mumble 使用哪種語言。</b><br />你需要重啟 Mumble 來使用新語言。
Look and Feel
操作界面
Layout
界面布局
Classic
經典
Stacked
堆疊
Hybrid
混合
Custom
自訂
This changes the behavior when moving channels.
改變頻道拖曳時的行為。
This sets the behavior of channel drags; it can be used to prevent accidental dragging. <i>Move</i> moves the channel without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the channel.
This sets the behavior of channel drags; it can be used to prevent accidental dragging. <i>Move Channel</i> moves the channel without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the channel.
This sets the behavior of channel drags; it can be used to prevent accidental dragging. <i>Move</i> moves the channel without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the channel.
Expand
展開
When to automatically expand channels
何時自動展開頻道
Channel Dragging
頻道拖曳
Ask whether to close or minimize when quitting Mumble.
詢問退出 Mumble 時是關閉還是最小化。
Ask on quit while connected
與伺服器連線期間離開前確認
Always On Top
最上層顯示
<b>If set, minimizing the Mumble main window will cause it to be hidden and accessible only from the tray. Otherwise, it will be minimized as a window normally would.</b>
<b>如果選中,最小化 Mumble 主窗口時將使得它被隱藏到系統托盤。否則,它將會像通常一樣被最小化。</b>
Hide in tray when minimized
最小化時隱藏到系統列
Hide the main Mumble window in the tray when it is minimized.
最小化時,隱藏 Mumble 主界面到系統列。
This setting controls when the application will be always on top.
本設定控制程式何時以最上層顯示。
Never
從不
Always
總是
In minimal view
簡潔視窗時
In normal view
一般顯示時
Displays talking status in system tray
在系統列顯示發話狀態
Show talking status in tray icon
在系統列顯示發話狀態
This setting controls in which situations the application will stay always on top. If you select <i>Never</i> the application will not stay on top. <i>Always</i> will always keep the application on top. <i>In minimal view</i> / <i>In normal view</i> will only keep the application always on top when minimal view is activated / deactivated.
This setting controls in which situations the application will stay always on top. If you select <i>Never</i> the application will not stay on top. <i>Always</i> will always keep the application on top. <i>In minimal view</i> / <i>In normal view</i> will only keep the application always on top when minimal view is activated / deactivated.
Show context menu in menu bar
在選單列顯示使用者與頻道選單
Apply some high contrast optimizations for visually impaired users
允許視障使用者使用高對比色彩配置
Optimize for high contrast
高對比色彩配置最佳化
Application
程式界面
Adds user and channel context menus into the menu bar
在選單列顯示使用者與頻道選單
Tray Icon
系統列圖示
Channel Tree
頻道樹
Use selected item as the chat bar target
手動指定發送文字訊息的目標頻道
Filter automatically hides empty channels
過濾器會自動隱藏空頻道
Show transmit mode dropdown in toolbar
在工具列顯示傳輸模式的下拉選單
Theme
佈景主題
Theme to use to style the user interface
佈景主題用來設定使用者介面風格
<b>Configures which theme the Mumble user interface should be styled with</b><br />Mumble will pick up themes from certain directories and display them in this list. The one you select will be used to customize the visual appearance of Mumble. This includes colors, icons and more.
User Dragging
This changes the behavior when moving users.
This sets the behavior of user drags; it can be used to prevent accidental dragging. <i>Move</i> moves the user without prompting. <i>Do Nothing</i> does nothing and prints an error message. <i>Ask</i> uses a message box to confirm if you really wanted to move the user.
<b>Enable Developer menu</b><br />This enables the "Developer"-menu in Mumble. This menu is used for developer-specific features, such as the Developer Console.
Enable Developer menu
When in custom layout mode, checking this disables rearranging.
Lock layout
Talking UI
A user that is silent for the given amount of seconds will be removed from the Talkin UI.
Remove silent user after
If this is checked, the local user (yourself) will always be visible in the TalkingUI (regardless of talking state).
Always keep local user visible
How many characters from the original name to display at the beginning of an abbreviated name.
String to separate a channel name from its parent's.
Channel separator
Abbreviated prefix characters
The names of how many parent channels should be included in the channel's name when displaying it in the TalkingUI?
How many characters from the original name to display at the end of an abbreviated name.
Abbreviated postfix characters
Whether to also allow abbreviating the current channel of a user (instead of only its parent channels).
Abbreviate current channel name
Channel hierarchy depth
Abbreviation replacement
Whether the channel (hierarchy) name should be abbreviated, if it exceeds the specified maximum length.
Abbreviate channel names
The preferred maximum length of a channel (hierarchy) name in the Talking UI. Note that this is not a hard limit though.
Max. channel name length
Relative font size to use in the Talking UI in percent.
Rel. font size (%)
String that gets used instead of the cut-out part of an abbreviated name.
Prefix character count
Postfix character count
Maximum name length
Relative font size
Always on top
Channel dragging
Automatically expand channels when
User dragging behavior
Silent user lifetime
Show the local volume adjustment for each user (if any).
Show volume adjustments
Whether to show all of the local user's listeners (ears) in the TalkingUI (and thereby also the channels they are in).
Show local user's listeners (ears)
Hide the username for each user if they have a nickname.
Show nicknames only
MainWindow
Root
根
Push-to-Talk
Global Shortcut
按鍵發話
Push and hold this button to send voice.
Global Shortcut
按住發話鍵發送語音。
This configures the push-to-talk button, and as long as you hold this button down, you will transmit voice.
Global Shortcut
設定發話鍵,只要你按住該鍵,語音將被傳送。
Reset Audio Processor
Global Shortcut
重設音效處理程序
Unlink Plugin
Global Shortcut
停用外掛
Push-to-Mute
Global Shortcut
按鍵關麥克風
Join Channel
Global Shortcut
加入頻道
Toggle Overlay
Global Shortcut
切換浮動視窗
Toggle state of in-game overlay.
Global Shortcut
切換遊戲內浮動視窗狀態。
Toggle Minimal
Global Shortcut
切換最小化
Volume Up (+10%)
Global Shortcut
增加音量(+10%)
Volume Down (-10%)
Global Shortcut
降低音量(-10%)
Mumble
Mumble
Mumble -- %1
Mumble -- %1
&Window
視窗(&W)
Minimize
最小化
Ctrl+M
Ctrl+M
Close
關閉
Mumble is currently connected to a server. Do you want to Close or Minimize it?
Mumble 正與伺服器連線中。你希望關閉還是最小化?
Mute Self
Global Shortcut
關閉麥克風
Set self-mute status.
Global Shortcut
設定成關閉麥克風狀態。
This will set or toggle your muted status. If you turn this off, you will also disable self-deafen.
Global Shortcut
這將設定或切換您的關閉麥克風狀態。如果您關閉此功能,您還可以停用自動消音。
Deafen Self
Global Shortcut
自我關閉喇叭
Set self-deafen status.
Global Shortcut
設定自我關閉喇叭狀態。
This will set or toggle your deafened status. If you turn this on, you will also enable self-mute.
Global Shortcut
這將設定或切換您的關閉喇叭狀態。如果您開啟此功能,您將同時進入關閉麥克風狀態。
Whisper/Shout
Whisper
悄悄話/大喊
<center>Not connected</center>
Not connected
<center>未連接</center>
Clear
清除
Opening URL %1
開啟網址 %1
File does not exist
檔案不存在
File is not a configuration file.
不是設定檔。
Settings merged from file.
合併設定檔。
URL scheme is not 'mumble'
'Mumble' 不支援的網址
This version of Mumble can't handle URLs for Mumble version %1.%2.%3
目前的 Mumble 無法處理版本 %1.%2.%3 產生的網址
Connecting to %1
正在連接 %1
Enter username
輸入使用者名稱
Connecting to server %1.
連線到伺服器 %1。
Reconnecting.
正在重新連線。
Transmit Mode set to Continuous
語音發送模式設為連續
Register yourself as %1
註冊自己成為 %1
<p>You are about to register yourself on this server. This action cannot be undone, and your username cannot be changed once this is done. You will forever be known as '%1' on this server.</p><p>Are you sure you want to register yourself?</p>
Register user %1
註冊使用者 %1
<p>You are about to register %1 on the server. This action cannot be undone, the username cannot be changed, and as a registered user, %1 will have access to the server even if you change the server password.</p><p>From this point on, %1 will be authenticated with the certificate currently in use.</p><p>Are you sure you want to register %1?</p>
<p>您在此伺服器的註冊名稱為 %1。這個動作無法取消,未來也無法變更使用者名稱, %1 即使您變更密碼依舊可以連接此伺服器.</p><p>從此刻開始, %1 將使用憑證進行認證</p><p>您確定要註冊成 %1?</p>
Kicking user %1
正在剔除使用者 %1
Banning user %1
正在禁封 %1
View comment on user %1
檢視使用者 %1 的註解
Message to channel %1
發送文字訊息到 %1 頻道
Connected.
已連線。
<li>Expected certificate digest (SHA-1): %1</li>
Server presented a certificate which failed verification.
服務器提供的憑證認證失敗。
<p>%1</p><ul>%2</ul><p>The specific errors with this certificate are:</p><ol>%3</ol><p>Do you wish to accept this certificate anyway?<br />(It will also be stored so you won't be asked this again.)</p>
SSL Version mismatch
SSL版本不合
Server connection failed.
<center>Type message to channel '%1' here</center>
Type message to channel '%1' here
<center>在此輸入給 %1 頻道的文字訊息</center>
<center>Type message to user '%1' here</center>
Type message to user '%1' here
<center>在此輸入給使用者 %1 的文字訊息</center>
Choose image file
選擇圖檔
Failed to load image
讀取圖檔失敗
Could not open file for reading.
無法讀取開啟的檔案。
Image format not recognized.
無法辨識圖檔格式。
&User
使用者(&U)
&Channel
頻道(&C)
Use in conjunction with Whisper to.
Global Shortcut
結合悄悄話一起。
This will switch the states of the in-game overlay.
Global Shortcut
這將切換遊戲中浮動視窗的狀態。
Link Channel
Global Shortcut
連接頻道
Cycle Transmit Mode
Global Shortcut
循環發送模式
Set Transmit Mode to Push-To-Talk
Global Shortcut
Set Transmit Mode to Continuous
Global Shortcut
Set Transmit Mode to VAD
Global Shortcut
Send Text Message
Global Shortcut
送出文字訊息
Send Clipboard Text Message
Global Shortcut
This will send your Clipboard content to the channel you are currently in.
Global Shortcut
Continuous
連續
Voice Activity
語音活動
Push-to-Talk
按鍵發話
Mumble - Minimal View -- %1
Mumble - 精簡檢視 -- %1
Cancel
取消
Save Image As...
另存圖片 ...
Save Image File
儲存圖片
Could not save image: %1
無法儲存圖片:%1
Change your comment
變更你的註解
Transmit Mode set to Voice Activity
語音發送模式設為語音活動時
Transmit Mode set to Push-to-Talk
語音發送模式設為按鍵發話
&View Certificate
檢視憑證(&V)
Enter reason
輸入原因
Sending message to %1
發送訊息給 %1
To %1: %2
發送給 %1: %2
Message to %1
發送訊息給 %1
Are you sure you want to reset the comment of user %1?
你確定要重製使用者 %1 的註解?
Are you sure you want to reset the avatar of user %1?
你確定要重設使用者 %1 的頭像?
Are you sure you want to delete %1 and all its sub-channels?
你確定要刪除 %1 和它的子頻道嗎?
Sending message to channel %1
發送訊息給頻道 %1
Message to tree %1
發送消息給樹 %1
To %1 (Tree): %2
(Tree) %1: %2
給 %1 (樹): %2
Unmuted and undeafened.
解除關閉麥克風與喇叭。
Unmuted.
解除關閉麥克風。
Muted.
關閉麥克風。
Muted and deafened.
已關閉麥克風與喇叭。
Deafened.
已關閉喇叭。
Undeafened.
解除關閉喇叭。
Restart Mumble?
重新啟動 Mumble?
Some settings will only apply after a restart of Mumble. Restart Mumble now?
部份設定只在 Mumble 重新啟動後生效。現在就重新啟動 Mumble?
About Qt
關於 Qt
SSL Verification failed: %1
SSL 認證失敗: %1
<li>Server certificate digest (SHA-1): %1</li>
<b>WARNING:</b> The server presented a certificate that was different from the stored one.
<b>警告:</b>伺服器提供的憑證與保存的憑證不同。
This server is using an older encryption standard, and is no longer supported by modern versions of Mumble.
這台伺服器使用舊式加密標準,新版的 Mumble 已不再支援。
Server connection failed: %1.
伺服器連線失敗: %1.
Disconnected from server.
與伺服器斷開連接。
Invalid username
無效的使用者名稱
You connected with an invalid username, please try another one.
你使用一個無效的使用者名稱連線,請嘗試另外一個。
Username in use
使用者名稱重複
That username is already in use, please try another username.
使用者名稱已經存在,請使用其他名稱。
Wrong certificate or password
錯誤的憑證或密碼
Wrong certificate or password for registered user. If you are
certain this user is protected by a password please retry.
Otherwise abort and check your certificate and username.
Wrong password
密碼錯誤
Wrong server password for unregistered user account, please try again.
未註冊使用者的伺服器密碼錯誤,請重試。
Images (*.png *.jpg *.jpeg)
圖片 (*.png *.jpg *.jpeg)
C&onfigure
設定(&C)
&Help
說明(&H)
Log
日誌
This shows all recent activity. Connecting to servers, errors and information messages all show up here.<br />To configure exactly which messages show up here, use the <b>Settings</b> command from the menu.
這裡顯示所有最近的活動。正在連線服務器、錯誤和通知消息都將在此顯示。<br />設定哪些訊息在此顯示,請從選單中使用<b>設定</b>。
&Quit Mumble
離開 Mumble(&Q)
Closes the program
關閉程式
Exits the application.
退出應用程式。
Ctrl+Q
Ctrl+Q
Open the server connection dialog
打開伺服器連線對話框
&Disconnect
斷開連線(&D)
Disconnect from server
從伺服器斷開連線
Disconnects you from the server.
使你從伺服器斷開連線。
Show information about the server connection
顯示伺服器連接訊息
This will show extended information about the connection to the server.
顯示服務器連接的額外訊息。
&Mute
關閉麥克風(&M)
&Deafen
關閉喇叭(&D)
&Local Mute
本地關閉麥克風(&L)
Send a Text Message
發送文字訊息
Sends a text message to another user.
向其他使用者發送文字訊息。
Add new channel
新增頻道
This adds a new sub-channel to the currently selected channel.
在目前選頻道內新增一個子頻道。
Remove channel
移除頻道
This removes a channel and all sub-channels.
刪除頻道及其所有子頻道。
Edit Groups and ACL for channel
編輯頻道群組與存取控制表
This opens the Group and ACL dialog for the channel, to control permissions.
開啟頻道群組和存取控制表,來編輯頻道的連線權限。
&Link
連結(&L)
Link your channel to another channel
連結你的頻道和另一個頻道
This is the chatbar<br />If you enter text here and then press enter the text is sent to the user or channel that was selected. If nothing is selected the message is sent to your current channel.
Chatbar
聊天室
Shows a dialog of registered servers, and also allows quick-connect.
顯示已註冊伺服器的對話框,並允許快速連結。
Kick user (with reason)
踢出使用者 (附帶理由)
Kick selected user off server. You'll be asked to specify a reason.
從伺服器踢出使用者。你將被要求提供理由。
Mute user
關閉使用者麥克風
Mute or unmute user on server. Unmuting a deafened user will also undeafen them.
關閉或開啟伺服器上使用者的麥克風。開啟一個關閉喇叭的使用者的麥克風的同時將會一併開啟他的喇叭。
Kick and ban user (with reason)
踢出與封鎖使用者 (附帶理由)
Kick and ban selected user from server. You'll be asked to specify a reason.
從伺服器上踢出與封鎖使用者。你將被要求提出理由。
Deafen user
關閉使用者的喇叭
Deafen or undeafen user on server. Deafening a user will also mute them.
關閉或開啟伺服器上使用者的喇叭。關閉喇叭的同時將一併關閉麥克風。
Mute user locally
關閉局部使用者的麥克風
Mute or unmute user locally. Use this on other users in the same room.
關閉或開啟局部使用者麥克風。將此設定套用於同一個房間的使用者。
This links your current channel to the selected channel. If users in a channel have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.
This links your current channel to the selected channel. If they have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.
&Unlink
Channel
取消連結(&U)
Unlink your channel from another channel
取消你的頻道和另一個頻道之間的連結
This unlinks your current channel from the selected channel.
取消你的當前頻道和所選頻道之間的連結。
Unlinks your channel from all linked channels.
取消你的頻道和所有已連結頻道之間的連結。
This unlinks your current channel (not the selected one) from all linked channels.
取消你的當前頻道(非所選頻道)和所有已連結的頻道之間的連結。
&Reset
重設(&R)
Reset audio preprocessor
重設音效處理程序
This will reset the audio preprocessor, including noise cancellation, automatic gain and voice activity detection. If something suddenly worsens the audio environment (like dropping the microphone) and it was temporary, use this to avoid having to wait for the preprocessor to readjust.
該選項將重置音頻預處理器,包含噪音消除,自動獲取和語音活動檢測。如果音頻環境突然變的惡劣(比如掉麥)并且是暫時的,使用該選項來避免等待預處理器自我調節。
&Mute Self
自我關閉麥克風(&M)
Mute yourself
自我關閉麥克風
Mute or unmute yourself. When muted, you will not send any data to the server. Unmuting while deafened will also undeafen.
對自己關閉麥克風或取消關閉麥克風。當關閉麥克風時,你將無法發送語音到伺服器。當取消關閉麥克風時將同時取消關閉喇叭。
&Deafen Self
自我關閉喇叭(&D)
Deafen yourself
自我關閉喇叭
Deafen or undeafen yourself. When deafened, you will not hear anything. Deafening yourself will also mute.
使自己關閉喇叭或取消關閉喇叭。當關閉喇叭時,你將聽不到聲音。自我關閉喇叭時亦關閉麥克風。
&Text-To-Speech
文字轉語音(&T)
Toggle Text-To-Speech
切換文字轉語音
Enable or disable the text-to-speech engine. Only messages enabled for TTS in the Configuration dialog will actually be spoken.
使用或庭用文字轉語音引擎。只有在設定對話框裡啟用了文字轉語音時英文文字訊息才會被讀出來。
Display audio statistics
顯示音效統計
Pops up a small dialog with information about your current audio input.
彈出一個關于你當前音頻輸入信息的對話框。
Forcibly unlink plugin
強制卸載外掛
This forces the current plugin to unlink, which is handy if it is reading completely wrong data.
強制卸載目前外掛,當外掛讀取的數據完全錯誤時相當有用。
Configure Mumble
設定 Mumble
Allows you to change most settings for Mumble.
允許你改變 Mumble 的大多數設定。
Start the audio configuration wizard
啟動音效精靈
This will guide you through the process of configuring your audio hardware.
這將引導你設定你的音效硬體。
&What's This?
這是什麼(&W)?
Enter What's This? mode
進入 這是什麼? 模式
Click this to enter "What's This?" mode. Your cursor will turn into a question mark. Click on any button, menu choice or area to show a description of what it is.
點擊進入"這是什麼?"模式。你的滑鼠將變成一個問號。點擊任意按鈕,選單或區域來顯示它的描述。
Information about Mumble
Mumble 的相關訊息
Shows a small dialog with information and license for Mumble.
顯示一個 Mumble 相關訊息和許可的對話框。
Information about Speex
Speex 的相關訊息
Shows a small dialog with information about Speex.
顯示一個 Speex 相關信息的小對話框。
Information about Qt
Qt 相關訊息
Shows a small dialog with information about Qt.
顯示一個 Qt 相關訊息的小對話框。
Check for &Updates
檢查與更新(&U)
Check for new version of Mumble
檢查新版 Mumble
Connects to the Mumble webpage to check if a new version is available, and notifies you with an appropriate download URL if this is the case.
連接到 Mumble 首頁檢查是否有新版可用,如果有新版本將通知你下載。
Sends a text message to all users in a channel.
向頻道內所有使用者發送純文字訊息。
Configure certificates for strong authentication
設定高強度驗證頻證
This starts the wizard for creating, importing and exporting certificates for authentication against servers.
開啟引導精靈,建立、匯入與匯出伺服器身份驗證憑證。
Register user on server
伺服器上註冊使用者
This will permanently register the user on the server.
使用者將永久註冊在伺服器上。
Add &Friend
新增朋友(&F)
Adds a user as your friend.
增加一個使用者成為朋友。
This will add the user as a friend, so you can recognize him on this and other servers.
增加一個使用者成為朋友,不管在此伺服器或其他伺服器你都可以辨認他。
&Remove Friend
移除朋友(&R)
Removes a user from your friends.
自朋友列中刪除一個使用者。
This will remove a user from your friends list.
你將從朋友清單中刪除一個使用者。
&Update Friend
更新朋友(&U)
Update name of your friend.
更新你的朋友的名字。
Your friend uses a different name than what is in your database. This will update the name.
好友的名稱與資料庫紀錄不同。即將更新。
Edit registered users list
編輯已註冊使用者清單
This opens the editor for registered users, which allow you to change their name or unregister them.
開啟註冊帳號編輯器,允許您變更他們的名稱或取消註冊。
Add or remove text-based access tokens
增加或移除文字存取標記
&Minimal View
簡潔視窗(&M)
Toggle minimal window modes
啟用簡潔視窗模式
This will toggle minimal mode, where the log window and menu is hidden.
這將啟用簡潔視窗模式,該模式將隱藏日誌欄與選單。
You muted and deafened %1.
你已關閉 %1 麥克風與喇叭。
You unmuted and undeafened %1.
你已開啟 %1 麥克風與喇叭。
You undeafened %1.
你的喇叭被 %1 開啟。
You suppressed %1.
你抑制了 %1。
%1 muted and deafened by %2.
%2 關閉 %1 的麥克風與喇叭。
%1 unmuted and undeafened by %2.
%2 開啟 %1 的麥克風與喇叭。
%1 undeafened by %2.
%1 被 %2 取消關閉喇叭。
%1 suppressed by %2.
%2 抑制了 %1。
%1 moved to %2.
%1 移動至 %2。
%1 moved to %2 by %3.
%3 將 %1 移動至 %2。
%1 moved in from %2 by %3.
%3 將 %1 從 %2 移動到此。
%1 is now muted and deafened.
%1 現在被關閉麥克風和關閉喇叭.
Your account information can not be verified currently. Please try again later
您的帳戶信息目前無法確認,請稍候重試
Welcome message: %1
歡迎訊息:%1
Mumble: %1
Mumble:%1
You were denied %1 privileges in %2.
您在 %2 的 %1 權限被拒絕。
%3 was denied %1 privileges in %2.
%3 在 %2 的 %1 權限被拒絕。
Denied: Cannot modify SuperUser.
拒絕:無法修改超級使用者。
Denied: Invalid channel name.
拒絕:無效的頻道名稱。
Denied: Text message too long.
拒絕:訊息太長。
Denied: Operation not permitted in temporary channel.
拒絕:此操作無法使用於臨時頻道。
You need a certificate to perform this operation.
您需要憑證才可進行此操作。
%1 does not have a certificate.
%1 沒有憑證。
Invalid username: %1.
無效的使用者名稱: %1
Invalid username.
無效的用戶名。
Channel is full.
頻道已滿。
Channel nesting limit reached.
Channel count limit reached. Need to delete channels before creating new ones.
Permission denied.
沒有權限。
%1 connected and entered channel.
%1 connected.
%1 已連線。
%1 is now muted.
%1 現在被關閉麥克風。
%1 is now unmuted.
%1 現在被取消關閉麥克風。
Recording started
已開始錄音
Recording stopped
已停止錄音
%1 started recording.
%1 已開始錄音。
%1 stopped recording.
%1 已停止錄音。
You revoked your priority speaker status.
You assumed priority speaker status.
%1 revoked your priority speaker status.
%1 gave you priority speaker status.
You revoked priority speaker status for %1.
You gave priority speaker status to %1.
%1 revoked own priority speaker status.
%1 assumed priority speaker status.
%1 revoked priority speaker status for %2.
%1 gave priority speaker status to %2.
You were unmuted and undeafened by %1.
You were muted by %1.
你被 %1 關閉麥克風。
You were undeafened by %1.
你被 %1 取消關閉喇叭。
You were suppressed.
You were suppressed by %1.
你被抑制了。
You were unsuppressed.
You were unsuppressed by %1.
You joined %1.
You moved %1 to %2.
您已移動 %1 到 %2。
%1 is recording
%1 正在錄音
%1 renamed to %2 by %3.
%1 disconnected.
%1 離線。
Server
message from
伺服器
Failed to load Opus, it will not be available for audio encoding/decoding.
The server requests minimum client version %1
伺服器要求使用 %1 以上版本客戶端
The server requests positional audio be enabled.
伺服器要求啟動定位音效。
The server requests positional audio be disabled.
伺服器要求關閉定位音效。
The server requests Push-to-Talk be enabled.
伺服器要求使用按鍵發話。
The server requests Push-to-Talk be disabled.
伺服器要求關閉按鍵發話。
You were unmuted by %1.
你被 %1 取消關閉麥克風。
You muted %1.
你關閉了 %1 的麥克風。
You unsuppressed %1.
你開啟了 %1 的麥克風。
You unmuted %1.
你開啟了 %1 的麥克風。
%1 muted by %2.
%1 被 %2 關閉麥克風。
%1 unsuppressed by %2.
%1 unmuted by %2.
%1 被 %2 取消關閉麥克風。
Unable to find matching CELT codecs with other clients. You will not be able to talk to all users.
You were muted and deafened by %1.
You were deafened by %1.
你被 %1 關閉麥克風與喇叭。
You were kicked from the server by %1: %2.
你被 %1 從服務器踢出: %2。
%3 was kicked from the server by %1: %2.
%3 被 %1 從服務器踢出: %2。
You were kicked and banned from the server by %1: %2.
你被 %1 從服務器踢出並封鎖: %2。
%3 was kicked and banned from the server by %1: %2.
%3 被 %1 從服務器踢出並封鎖: %2。
You were moved to %1 by %2.
你被從 %1 移動到 %2。
%1 entered channel.
%1 進入頻道。
Server connection rejected: %1.
伺服器拒絕連接: %1。
Denied: %1.
拒絕: %1。
%1 renamed to %2.
%1 更改名稱為 %2。
%1 left channel and disconnected.
%1 離開頻道且離線。
Message from %1
來至 %1 的消息
You have User Dragging set to "Do Nothing" so the user wasn't moved.
You have Channel Dragging set to "Do Nothing" so the channel wasn't moved.
你設置頻道拖動為“無動作"因此頻道沒有被移動。
Unknown Channel Drag mode in UserModel::dropMimeData.
UserModel::dropMimeData 中未知的頻道拖放模式。
Remote controlling Mumble:
Invocation
調用
Error: No RPC command specified
錯誤:指定的 PRC 指令不存在。
RPC
遠端程序呼叫
Welcome to Mumble.
歡迎使用 Mumble。
Skipping version check in debug mode.
在除錯模式中略過版本檢查。
Hide Frame
隱藏邊框
Toggle showing frame on minimal window
在簡潔視窗模式下切換邊框顯示
This will toggle whether the minimal window should have a frame for moving and resizing.
該選項切換簡化窗口是否有個用來移動和改變大小的邊框。
&Unlink All
取消所有連結(&U)
Reset the comment of the selected user.
重設使用者註解。
&Join Channel
加入頻道(&J)
View comment in editor
在編輯器中檢視使用者註解
Query server for connection information for user
查詢伺服器的使用者資訊
S&erver
伺服器(&E)
&Self
本機設定(&S)
&Unlink Plugins
停用外掛(&U)
Register yourself on the server
在此伺服器註冊
Change your avatar image on this server
更改你在此伺服器的頭像。
&Remove Avatar
移除頭像(&R)
Remove currently defined avatar image.
移除目前定義的頭像圖片。
Icon Toolbar
工具欄圖示
Change your own comment
變更你自己的註解
Recording
錄音
Priority Speaker
優先講者
&Copy URL
複製網址(&C)
Copies a link to this channel to the clipboard.
複製頻道網址到剪貼簿。
Ignore Messages
忽略訊息
Locally ignore user's text chat messages.
本地忽略使用者的文字聊天訊息。
Silently drops all text messages from the user.
自動刪除來自所有使用者的文字訊息。
Edit ban list on server
編輯伺服器上的封鎖名單
This lets you edit the server-side IP ban list.
讓你編輯伺服器端的封鎖 IP 清單。
&Filter on/off
開/關過濾器(&F)
Toggle the channel filter (Ctrl+F)
切換頻道過濾器 (Ctrl+F)
Enable or disable the filtering of select channels.
By default all empty channels will be filtered.
You can mark additional channels for filtering from
the channel's context menu.
Ctrl+F
Ctrl+F
&Hide Channel when Filtering
隱藏被過濾的頻道 (&H)
Reset the avatar of the selected user.
重設指定使用者的頭像。
Locally adjust the user's speech volume.
調整部份使用者的音量。
Opens a dialog with a volume slider. Use this on other users in the same room.
&Developer
&Hide Mumble
Hides the main Mumble window.
Hides the main Mumble window. Restore by clicking on the tray icon or starting Mumble again.
Show the Developer Console
Shows the Mumble Developer Console, where Mumble's log output can be inspected.
&Connect...
&Ban list...
&Information...
&Kick...
&Ban...
Local Volume Adjustment...
Send &Message...
&Add...
&Remove...
&Edit...
編輯(&E)...
Audio S&tatistics...
&Settings...
&Audio Wizard...
Developer &Console...
&About...
About &Speex...
About &Qt...
&Certificate Wizard...
&Register...
Registered &Users...
Change &Avatar...
&Access Tokens...
Reset &Comment...
Reset &Avatar...
View Comment...
&Change Comment...
R&egister...
Show
Shows the main Mumble window.
Server sync protocol violation. No user profile received.
Protocol violation. Server sent remove for occupied channel.
Listen to channel
Listen to this channel without joining it
Locally adjust the volume for this virtual ear.
&Listener
No action available...
Unable to %1 into %2 - Adding the respective access (password) token might grant you access.
No more listeners allowed in this channel.
You are not allowed to listen to more channels than you currently are.
You started listening to %1
%1 started listening to your channel
You stopped listening to %1
%1 stopped listening to your channel
Talking UI
Toggles the visibility of the TalkingUI.
Join user's channel
Joins the channel of this user.
Channels and users
Activity log
Chat message
Disable Text-To-Speech
Locally disable Text-To-Speech for this user's text chat messages.
Silently disables Text-To-Speech for all text messages from the user.
Tree
Channel
頻道
Private
%1: %2
(%1) %2
Configuration file %1 does not exist or is not writable.
Hide/show main window
Global Shortcut
&Set Nickname...
Set a local nickname
Sets a local nickname for another user.
Usage: mumble rpc <action> [options]
It is possible to remote control a running instance of Mumble by using
the 'mumble rpc' command.
Valid actions are:
mute
Mute self
unmute
Unmute self
togglemute
Toggle self-mute status
deaf
Deafen self
undeaf
Undeafen self
toggledeaf
Toggle self-deafen status
starttalking
Start talking
stoptalking
Stop talking
Usage: mumble [options] [<url> | <plugin_list>]
<url> specifies a URL to connect to after startup instead of showing
the connection window, and has the following form:
mumble://[<username>[:<password>]@]<host>[:<port>][/<channel>[/<subchannel>...]][?version=<x.y.z>]
<plugin_list> is a list of plugin files that shall be installed
The version query parameter has to be set in order to invoke the
correct client version. It currently defaults to 1.2.0.
Valid options are:
-h, --help Show this help text and exit.
-m, --multiple
Allow multiple instances of the client to be started.
-c, --config
Specify an alternative configuration file.
If you use this to run multiple instances of Mumble at once,
make sure to set an alternative 'database' value in the config.
-n, --noidentity
Suppress loading of identity files (i.e., certificates.)
-jn, --jackname <arg>
Set custom Jack client name.
--license
Show the Mumble license.
--authors
Show the Mumble authors.
--third-party-licenses
Show licenses for third-party software used by Mumble.
--window-title-ext <arg>
Sets a custom window title extension.
--dump-input-streams
Dump PCM streams at various parts of the input chain
(useful for debugging purposes)
- raw microphone input
- speaker readback for echo cancelling
- processed microphone input
--print-echocancel-queue
Print on stdout the echo cancellation queue state
(useful for debugging purposes)
--translation-dir <dir>
Specifies an additional translation fir <dir> in which
Mumble will search for translation files that overwrite
the bundled ones
Directories added this way have higher priority than
the default locations used otherwise
--print-translation-dirs
Print out the paths in which Mumble will search for
translation files that overwrite the bundled ones.
(Useful for translators testing their translations)
--locale <locale>
Overwrite the locale in Mumble's settings with a
locale that corresponds to the given locale string.
If the format is invalid, Mumble will error.
Otherwise the locale will be permanently saved to
Mumble's settings.
Manual
Manual Mumble Positional Audio
Position
順位
X
Y
Z
m
Heading
Azimuth
Elevation
°
Meta data
Context
前後關系
Identity
Set
State
狀態
Unhinge
Link
Activate
Display
顯示
How long silent user's positions should stay marked after they have stopped talking (in seconds).
Silent user displaytime:
NetworkConfig
Network
網路
Connection
連接
Use TCP compatibility mode
Use TCP compatability mode
使用 TCP 相容模式
<b>Enable TCP compatibility mode</b>.<br />This will make Mumble use only TCP when communicating with the server. This will increase overhead and cause lost packets to produce noticeable pauses in communication, so this should only be used if you are unable to use the default (which uses UDP for voice and TCP for control).
<b>啟用 TCP 兼容模式</b>。<br/>這將使 Mumble 與服務器通信時只使用 TCP。這將增加系統開銷并導致丟包從而使通信時出現明顯的暫停,因此只有在你不能使用默認模式時使用它(默認模式使用 UDP 來傳輸語音,TCP 來控制)。
Reconnect when disconnected
連接斷開后重新連接
<b>Reconnect when disconnected</b>.<br />This will make Mumble try to automatically reconnect after 10 seconds if your server connection fails.
<b>連接斷開后重新連接</b>。<br/>這將使 Mumble 在與服務器的連接斷開 10秒后自動重新連接。
Reconnect automatically
自動重新連接
Proxy
代理伺服器
Type
類型
Type of proxy to connect through
代理伺服器的類型
Direct connection
直接連線
HTTP(S) proxy
HTTP(S) 代理
SOCKS5 proxy
SOCKS5 代理
Hostname
主機名
Hostname of the proxy
代理伺服器主機名稱
Force TCP mode
只用TCP模式
Enable QoS to prioritize packets
使用 QoS 優先發送封包
This will enable QoS, which will attempt to prioritize voice packets over other traffic.
啟用服務質量管理(QoS)後,語音封包將優先於其他流量處理。
Use Quality of Service
使用服務質量管理 (QoS)
Don't send certificate to server and don't save passwords. (Not saved).
不要將憑證傳給伺服器也不要儲存密碼。(不儲存)。
<b>This will suppress identity information from the client.</b><p>The client will not identify itself with a certificate, even if defined, and will not cache passwords for connections. This is primarily a test-option and is not saved.</p>
<b>這將阻止辨識客戶端的身份資訊</b><p>客戶端將無法使用憑證證明自己的身份,就算證明了,也無法儲存連線密碼。此為測試用選項且不儲存。</p>
Suppress certificate and password storage
不儲存憑證與密碼
<b>Type of proxy to connect through.</b><br />This makes Mumble connect through a proxy for all outgoing connections. Note: Proxy tunneling forces Mumble into TCP compatibility mode, causing all voice data to be sent via the control channel.
<b>通過代理伺服器的通訊協定類型</b><br/>讓 Mumble 所有通訊都透過代理伺服器。注意:使用代理穿隧將使 Mumble 進入 TCP 相容模式,所有語音資料將使用控制頻道發送。
<b>Hostname of the proxy.</b><br />This field specifies the hostname of the proxy you wish to tunnel network traffic through.
<b>代理伺服器的主機名稱</b><br/>用來指定存取網路的代理伺服器。
Port
埠號
Port number of the proxy
代理伺服器埠號
<b>Port number of the proxy.</b><br />This field specifies the port number that the proxy expects connections on.
<b>代理服務器埠號。</b><br/>該字段指定代理服務器使用的埠號。
Username
用戶名
Username for proxy authentication
用於代理認証的用戶名
<b>Username for proxy authentication.</b><br />This specifies the username you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.
<b>用於代理認証的用戶名。</b><br />該字段指定用於代理認証的用戶名。如果代理不需要認証,或者你想要使用匿名連接,請將此字段留白。
Password
密碼
Password for proxy authentication
用於代理認証的密碼
<b>Password for proxy authentication.</b><br />This specifies the password you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.
<b>用於代理認証的密碼。</b><br/>該字段指定用於代理認証的密碼。如果代理不需要認証,或者你想要使用匿名連接,請將此字段留白。
Mumble services
Mumble 服務
Check for new releases of Mumble automatically.
讓 Mumble 自動偵測新發行版本。
This will check for new releases of Mumble every time you start the program, and notify you if one is available.
每次啟動 Mumble 時,將會自動檢查有無新版本發行,如果發行新版將提醒通知。
Check for application updates on startup
啟動時檢查更新
Check for new releases of plugins automatically.
自動檢查外掛更新。
This will check for new releases of plugins every time you start the program, and download them automatically.
當啟動程式的時候,Mumble 將自動檢查並更新外掛模組。
<b>Submit anonymous statistics.</b><br />Mumble has a small development team, and as such needs to focus its development where it is needed most. By submitting a bit of statistics you help the project determine where to focus development.
<b>送出匿名統計。</b><br />Mumble 有一個重視未來發展的開發團隊,透過您的資訊能讓開發團隊更精確的抓住未來的發展方向。
Submit anonymous statistics to the Mumble project
遞交匿名統計數據給 Mumble 專案
Submit anonymous statistics
發送匿名統計
Reconnect to last used server when starting Mumble
啟動時連接最後使用的伺服器
Reconnect to last server on startup
啟動時自動連接到最後使用的伺服器
Privacy
Prevent OS information being sent to Mumble servers and web servers
<b>Don't send OS information to servers</b><br/>
Prevents the client from sending potentially identifying information about the operating system to the Mumble server and web servers.
Do not send OS information to Mumble servers and web servers
When toggled this hides the public server list from the connect dialog
Hide public server list
Check for plugin updates on startup
Automatically download and install plugin updates
Overlay
Silent
靜音
Talking
講話
Whisper
悄悄話
Shout
大喊
Channel
頻道
Failed to create communication with overlay at %2: %1. No overlay will be available.
無法在 %2 建立連接:%1。沒有可用的浮動視窗。
OverlayClient
Filter
過濾
Only talking
僅說話
Talking and recently active
說話語最近活動
All in current channel
目前頻道裡所有的
All in linked channels
所有相互連結的頻道
Always show yourself
總是顯視你自己
Configure recently active time (%1 seconds)...
設定最近活動時間 (%1 秒)…
Columns
列
Sort
排序
Alphabetically
按英文字母排序
Last state change
最後停留的頻道
Edit...
編輯…
Reset Zoom
重設大小
Configure recently active time
重設最近活動時間
Amount of seconds users remain active after talking:
多少秒鐘內持續判定語音活動:
OverlayConfig
To move the users, drag the little red dot.
拖動小紅點移動使用者清單。
To resize the users, mouse wheel over a user.
To resize the users, mousewheel over a user.
在使用者清單上使用滑鼠滾輪縮放使用者清單。
For more options, right click a user.
For more options, rightclick a user.
右鍵點擊使用者開啟更多選項。
Launcher Filter
Overlay
浮動視窗
Choose executable
選擇執行檔
Choose application
選擇應用程式
Choose path
Load Overlay Presets
載入浮動視窗樣板
Mumble overlay presets (*.mumblelay)
Mumble 浮動視窗樣板 (*.mumblelay)
Save Overlay Presets
儲存浮動視窗樣板
Options
選項
Enable overlay.
啟用浮動視窗。
Enable Overlay
啟用浮動視窗
This sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.<br />Please note that if you start Mumble after starting the application, or if you disable the overlay while the application is running, there is no safe way to restart the overlay without also restarting the application.
This sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.<br />Please note that if you start the application after starting Mumble, or if you disable the overlay while running, there is no safe way to restart the overlay without also restarting the application.
這裡設定開啟或關閉浮動視窗。這個設定只在啟動程式時檢查,因此要確定你啟動應用程式前 Mumble 還有本選項是開啟的。<br />請注意如果你已經開啟 Mumble 與應用程式或者在應用程式執行期間關閉了浮動視窗,除了重新啟動應用程式之外,沒有辦法重新啟動浮動視窗。
Layout
界面布局
Blacklist
黑名單
Whitelist
白名單
Uninstall Overlay
反安裝浮動視窗
Overlay Installation
安裝浮動視窗
Mumble has detected that you do not have the Mumble Overlay installed.
Click the button below to install the overlay.
Mumble 偵測到你尚未安裝 Mumble 浮動視窗。
點選下方按鍵安裝浮動視窗。
Install Mumble Overlay
安裝 Mumble 浮動視窗
Overlay Upgrade
浮動視窗升級
Mumble has detected an old version of the overlay support files installed on your computer.
To upgrade these files to their latest versions, click the button below.
Mumble 偵測到你已安裝舊版的浮動視窗檔。
點選下方按鈕,升級浮動視窗到最新版。
Upgrade Mumble Overlay
升級 Mumble 浮動視窗
Display a frame counter in the overlay
在浮動視窗中顯示 FPS
Show FPS counter
顯示 FPS
Load an overlay preset from file
從檔案讀取浮動視窗設定
Load…
讀取…
Save your overlay settings to file
儲存浮動視窗設定成檔案
Save…
儲存…
Set the overlay font.
設定字型。
Set the overlay text color.
設定浮動視窗文字色彩。
Color
色彩
Remove
刪除
Font
字型
FPS and Clock Display
顯示 FPS 與時間
Display a clock in the overlay showing the current local time (system time).
在浮動視窗中顯示現在時間 (系統時間)。
Show Clock
顯示時間
Overlay Exceptions
Overlay Exception Mode
Allowed launchers
Add
新增
Allowed programs
Allowed paths
Blacklisted programs
OverlayEditor
State
狀態
User is not talking
使用者沒有講話
Passive
被動
User is talking in your channel or a linked channel
使用者在你的頻道或與此頻道連結的頻道中講話。
Talking
講話中
User is whispering to you privately
使用者與你私下悄悄話中。
Private Whisper
私人的悄悄話
User is shouting to your channel
使用者在你的頻道中大喊
Channel Whisper
頻道悄悄話
Zoom
放大
Zoom Factor
縮放參數
Enabled Elements
可用元素
User avatar, chosen by each user
使用者頭像,由使用者自訂。
Avatar
頭像
User's name
使用者的名稱
Username
使用者名稱
Name of user's channel, if outside your current channel
使用者的頻道名稱,如果不在你目前所在頻道
Channel
頻道
Muted or deafened
關閉麥克風或喇叭
Mute state
靜默狀態
Bounding box, automatically shrunk to minimum size to contain all visible elements
邊框,自動將所有可見元素以最小顯示。
Bounding box
邊框
Overlay Editor
無縫嵌入編輯器
Zoom level
OverlayEditorScene
Layout preset
預設布局
Large square avatar
大型頭像
Avatar and Name
頭像與名稱
User Opacity
名單透明度
%1%
%1%
Object Opacity
物件透明度
Alignment
對齊方式
Left
靠左對齊
Center
置中對齊
Right
靠右對齊
Top
靠上對齊
Bottom
靠下對齊
Color...
色彩…
Font...
字型…
Bounding box
背景
Pen width
線條寬度
Padding
間距
Pen color
線條色彩
Fill color
填充色彩
Pick pen color
選擇線條色彩
Pick fill color
選擇填充色彩
Pick color
選擇色彩
Pick font
選擇字型
PluginConfig
Plugins
外掛
Plugin has no configure function.
外掛沒有設定選項。
Plugin has no about function.
外掛沒有額外資訊。
Options
選項
Enable plugins and transmit positional information
啟用外掛並傳送位置訊息
This allows plugins for supported games to fetch your in-game position and transmit it with each voice packet. This enables other users to hear your voice in-game from the direction your character is in relation to their own.
Link to Game and Transmit Position
連結到遊戲並傳送位置
Reloads all plugins
重新載入所有外掛
This rescans and reloads plugins. Use this if you just added or changed a plugin to the plugins directory.
重新掃描和重新載入外掛。當你增加或改變一個外掛時使用此選項。
&Reload plugins
&重新載入外掛
Information about plugin
外掛資訊
This shows a small information message about the plugin.
顯示插件相關信息。
&About
關於(&A)
Show configuration page of plugin
顯示外掛設定
This shows the configuration page of the plugin, if any.
顯示插件配置頁面。
&Configure
設定(&C)
Name
名稱
Enable
PA
KeyEvents
Install a plugin from a local file
Install plugin...
Unload the currently selected plugin. This will remove it from the plugin list for the current session.
Unload
The plugin was installed successfully
Unable to deactivate all requested features for plugin "%1"
Unable to load plugin "%1"
Whether the positional audio feature of this plugin should be enabled
This plugin does not provide support for positional audio
Whether this plugin has the permission to be listening to all keyboard events that occur while Mumble has focus
Whether this plugin should be enabled
PluginInstaller
PluginInstaller
You are about to install the plugin listed below. Do you wish to proceed?
<html><head/><body><p><span style=" font-weight:600;">Name:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Version:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Author(s):</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Description:</span></p></body></html>
&No
&Yes
The file "%1" is not a valid plugin file!
Found more than one plugin library for the current OS in "%1" ("%2" and "%3")!
Unable to find a plugin for the current OS in "%1"
Unable to load plugin "%1" - check the plugin interface!
Unable to delete old plugin at "%1"
Unable to copy plugin library from "%1" to "%2"
Unable to move plugin library to "%1"
PluginManager
%1 lost link
%1 linked
Plugin "%1" encountered a permanent error in positional data gathering
Non-plugin found in plugin directory: "%1"
Failed at loading manual plugin: %1
PluginUpdater
PluginUpdater
The following plugins can be updated.
Select all
Plugin
Download-URL
Do you want to update the selected plugins?
Unable to download plugin update for "%1" from "%2" (%3)
Update for plugin "%1" failed due to too many redirects
Unable to download plugin update for "%1" from "%2" (HTTP status code %3)
Successfully updated plugin "%1"
PortAudioSystem
Default device
PulseAudioSystem
Default Input
預設輸入
Default Output
預設輸出
QApplication
Failed to restart mumble
重新啟動 mumble 失敗
Mumble failed to restart itself. Please restart it manually.
Mumble 自我重新啟動失敗。請手動重啟。
Mumble is currently connected to a server
QObject
CodecInit: Failed to load Opus, it will not be available for encoding/decoding audio.
Talking UI
Echo cancellation is not supported for the interface combination "%1" (in) and "%2" (out).
<p>If you're using Linux this is most likely because you are using a version from your distribution's package repository that have their own update cycles.</p><p>If you want to always have the most recent Mumble version, you should consider using a different method of installation.
See <a href="https://wiki.mumble.info/wiki/Installing_Mumble">the Mumble wiki</a> for what alternatives there are.</p>
Local Mute
本地關閉麥克風
Ignore Messages
忽略訊息
Disable Text-To-Speech
"%1" could not be saved permanently and is lost on restart because %2 does not have a certificate.
Local Volume Adjustment...
<p>You're using a Mumble version that <b>explicitly disabled</b> update-checks.</p><p>This means that the update notification you might receive by using this option will <b>most likely be meaningless</b> for you.</p>
Talking (muted)
All messages
Toggle console for all events
Toggle pop-up notifications for all events
Toggle window highlight (if not active) for all events
Click here to toggle sound notifications for all events
Toggle Text-to-Speech for all events
RNNoise is not available due to a sample rate mismatch.
Reset all settings?
Do you really want to reset all settings (not only the ones currently visible) to their default value?
Local Nickname Adjustment...
<b>Blocked URL scheme "%1"</b>
The URL uses a scheme that has been blocked for security reasons.
Blocked URL: "%1"
Default Device
預設裝置
Access to the microphone was denied. Please allow Mumble to use the microphone by changing the settings in System Preferences -> Security & Privacy -> Privacy -> Microphone.
Access to the microphone was denied due to system restrictions. You will not be ableto use the microphone in this session.
If enabled this tries to cancel out echo from the audio stream.
Disabled
停用
Echo cancellation is disabled.
Mixed echo cancellation (speex)
Mixed has low CPU impact, but only works well if your speakers are equally loud and equidistant from the microphone.
Multichannel echo cancellation (speex)
Multichannel echo cancellation provides much better echo cancellation, but at a higher CPU cost. Multichannel echo cancellation requires more CPU, so you should try mixed first.
The provided URL uses an invalid version format: "%1"
The directories in which Mumble searches for extra translation files are:
Invocation
調用
EXPERIMENTAL: Acoustic echo cancellation (Apple).
The support for this option is experimental only! This option works best when using built-in microphone and speaker.
RichTextEditor
Failed to load image
讀取圖片失敗
Image file too large to embed in document. Please use images smaller than %1 kB.
嵌入文件的圖片過大,請使用小於 %1 kB 的圖片。
Message is too long.
訊息太長。
Display
顯示
Source Text
原始文字
&Bold
粗體(&B)
Ctrl+B
Ctrl+B
&Italic
斜體(&I)
Italic
斜體
Ctrl+I
Ctrl+I
Underline
下底線
Ctrl+U
Ctrl+U
Color
顏色
Insert Link
插入連結
Ctrl+L
Ctrl+L
Insert Image
插入圖片
RichTextEditorLink
Add Link
新增連結
URL
網址
Text
說明
ServerHandler
Unable to resolve hostname
Server is not responding to TCP pings
UDP packets cannot be sent to or received from the server. Switching to TCP mode.
UDP封包無法送發到伺服器或無法自伺服器接收。切換為 TCP 模式。
UDP packets cannot be sent to the server. Switching to TCP mode.
UDP封包無法發送到伺服器。切換為 TCP 模式。
UDP packets cannot be received from the server. Switching to TCP mode.
UDP封包無法自伺服器接收。切換為 TCP 模式。
UDP packets can be sent to and received from the server. Switching back to UDP mode.
UDP封包可以送到伺服器且可以自伺服器接收。切換回 UDP 模式。
Connection timed out
連線逾時
ServerInformation
Server information
Server Information
<b>Host:</b>
<html><head/><body><p><span style=" font-weight:600;">Port:</span></p></body></html>
<b>Users</b>:
<html><head/><body><p><span style=" font-weight:600;">Protocol:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">Release:</span></p></body></html>
<html><head/><body><p><span style=" font-weight:600;">OS:</span></p></body></html>
Audio
<html><head/><body><p><span style=" font-weight:600;">Allowed:</span></p></body></html>
<b>Current:</b>
<b>Codec:</b>
Connection details
UDP (Voice)
UDP (語音)
<b>Encryption:</b>
<b>Avg. latency:</b>
Statistics
Good
好
Late
延遲
Lost
遺失
Resync
重新同步
Outgoing
Incoming
Voice packets is currently sent over TCP.
TCP (Control)
TCP (控制)
<b>TLS version:</b>
<b>Cipher suite:</b>
<forward secrecy>
&View certificate
&Ok
Unknown
The connection provides perfect forward secrecy.
The connection does NOT provide perfect forward secrecy.
No information about forward secrecy available.
ServerView
Favorite
我的最愛
LAN
區域網路
Public Internet
公開網路
ShortcutActionWidget
Unassigned
未分配
ShortcutDelegate
On
開啟
Off
關閉
Toggle
切換
Unassigned
未分配
No buttons assigned
Press to show button combination
ShortcutTargetDialog
Root
根
Parent
上層
Current
目前
Subchannel #%1
子頻道 #%1
ShortcutTargetWidget
...
…
,
,
Root
根
Parent
父級
Current
目前
Subchannel #%1
子頻道 #%1
Invalid
無效
Empty
<Empty>
空
Current selection
ShortcutToggleWidget
Off
關閉
Toggle
切換
On
開啟
TextMessage
Enter text
輸入文字
If checked the message is recursively sent to all subchannels
選擇後訊息將發送到所有子頻道。
Send recursively to subchannels
發送到所有子頻道。
Message
消息
Tokens
Empty Token
空白授權碼
Mumble - Access Tokens
Mumble - 授權碼
List of access tokens on current server
列出目前伺服器所有授權碼
<b>This is an editable list of access tokens on the connected server.</b>
<br />
An access token is a text string, which can be used as a password for very simple access management on channels. Mumble will remember the tokens you've used and resend them to the server next time you reconnect, so you don't have to enter these every time.
Add a token
新增授權碼
&Add
新增(&A)
Remove a token
移除一個授權碼
&Remove
移除(&R)
Tokens
UserEdit
Registered Users
註冊使用者
Remove
移除
Rename
更名
Who are you looking for?
您在找誰?
Days
天
Weeks
週
Months
月
Years
年
Inactive for
停止活動
Registered users: %n account(s)
已註冊使用者:%n 個帳號
Search
User list
UserInformation
User Information
使用者資訊
Connection Information
連線資訊
Version
版本
OS
作業系統
Certificate
憑證
IP Address
IP位置
CELT Versions
CELT 版本
Details...
細節...
Ping Statistics
Ping 統計
Pings received
接收的 Ping
Average ping
平均 ping
TCP (Control)
TCP (控制)
UDP (Voice)
UDP (語音)
UDP Network statistics
UDP 網路統計
Good
好
Late
延遲
Lost
遺失
Resync
重新同步
From Client
從客戶端
To Client
到客戶端
Connection time
連接時間
%1w
%1w
%1d
%1d
%1h
%1h
%1m
%1m
%1s
%1s
,
,
%1 (%2)
%1.%2.%3 (%4)
%1 (%2)
Supported
支援
Not Supported
不支援
Not Reported
不回報
%1 online (%2 idle)
線上 %1 (%2 發呆)
%1 online
線上 %1
%1 kbit/s
%1 kbit/s
Bandwidth
GroupBox
頻寬
Bandwidth
Label
頻寬
Ping deviation
Ping 誤差
UserListModel
Nick
暱稱
Inactive days
停止活動天數
Last channel
最新頻道
Last seen: %1
最後看見: %1
Never
從不
Channel ID: %1
UserLocalNicknameDialog
Local nickname for other users
<b>Adjust the nickname of other users locally</b><br />
User nickname
Adjusting local nickname for %1
UserLocalVolumeDialog
Local volume for other users
<b>Adjust the volume of other users locally</b><br />Mumble supports adjusting the volume of other users locally.
Adjusting local volume for %1
調整 %1 的本機音量
dB
分貝
<html><head/><body><p>Use the slider or the text box to change the volume of the user.</p><p><span style="font-weight:600;">Attention!</span></p><p>Increasing the volume of a user too much can permanently damage your hearing. It may also increase the background noise of the user.</p></body></html>
User volume
UserModel
This is a user connected to the server. The icon to the left of the user indicates whether or not they are talking:
這是一位與伺服器連接的使用者。使用者左邊的圖示顯示他是否正在發話。
Talking to your channel.
正在對你的頻道講話。
Shouting directly to your channel.
Whispering directly to your channel.
直接對你的頻道大喊。
Whispering directly to you.
直接對您發送悄悄話。
Not talking.
沒有說話。
This is a channel on the server. The icon indicates the state of the channel:
此為伺服器上的一個頻道。圖示顯示頻道狀態:
Your current channel.
你目前的頻道。
A channel that is linked with your channel. Linked channels can talk to each other.
一個與您的頻道連接的頻道。連接的頻道可以相互通話。
A channel on the server that you are not linked to.
伺服器上一個你沒有連接的頻道。
This shows the flags the user has on the server, if any:
如果有的話,顯示此伺服氣上的使用者標示:
On your friend list
在好友清單中
Authenticated user
授權的使用者
Muted (manually muted by self)
關閉麥克風的 (自主關閉麥克風)
Muted (manually muted by admin)
關閉麥克風的 (管理員設定關閉麥克風)
Muted (not allowed to speak in current channel)
關閉麥克風的 (不允許在目前的頻道發話)
Muted (muted by you, only on your machine)
關閉麥克風的 (自主關閉麥克風,只在您的機器上有效)
Muted (push-to-mute)
Deafened (by self)
關閉喇叭(自設)
Deafened (by admin)
關閉喇叭(管理員設)
User has a new comment set (click to show)
使用者更新了說明 (點擊顯示)
User has a comment set, which you've already seen. (click to show)
使用者更新了說明,您已閱畢。(點擊顯示)
Ignoring Text Messages
忽略文字訊息
This shows the flags the channel has, if any:
如果有的話,顯示頻道標誌:
Channel has a new comment set (click to show)
頻道有新說明 (點擊顯示)
Channel has a comment set, which you've already seen. (click to show)
頻道有新說明,您已閱畢。 (點擊顯示)
Channel will be hidden when filtering is enabled
當過濾啟用時頻道將會隱藏
Name
名稱
Flags
標誌
Are you sure you want to drag this user?
Are you sure you want to drag this channel?
你確定要移動這個頻道?
Cannot perform this movement automatically, please reset the numeric sorting indicators or adjust it manually.
無法自動調整位置,請重新調整編號順序。
Talking while being muted on your end
This is a channel listener. The corresponding user hears everything you say in this channel.
Channel has access restrictions so that you can't enter it
Channel has access restrictions but you can enter nonetheless
VersionCheck
Upgrade Mumble
更新 Mumble
A new version of Mumble has been detected and automatically downloaded. It is recommended that you either upgrade to this version, or downgrade to the latest stable release. Do you want to launch the installer now?
檢測到新版的 Mumble 並已自動下載。建議您更新到此版本,或降版到最新穩定版。需要立即啟動安裝程式嗎?
Failed to launch snapshot installer.
快照版安裝程式啟動失敗。
Corrupt download of new version detected. Automatically removed.
新版程式下載失敗。已自動移除。
Downloading new snapshot from %1 to %2
從 %1 下載新快照版到 %2
Failed to write new version to disk.
Failed to write new version to disc.
新版程式寫入失敗。
Mumble failed to retrieve version information from the central server.
Mumble 接收中央伺服器訊息失敗。
ViewCert
Certificate Chain Details
認証鏈詳細信息
Certificate chain
認証鏈
Certificate details
認証詳細信息
Common Name
Organization
Subunit
Country
Locality
State
狀態
Valid from: %1
有效期始于: %1
Valid to: %1
有效期到: %1
Serial: %1
序列號: %1
Public Key: %1 bits %2
公開密鑰: %1 比特 %2
RSA
非對稱加密算法
DSA
數字簽名算法
Digest (SHA-1): %1
摘要 (SHA-1): %1
Digest (SHA-256): %1
摘要 (SHA-1): %1 {256)?}
Email: %1
Email: %1
DNS: %1
DNS: %1
Issued by:
發布者:
Unit Name
VoiceRecorder
Recorder failed to create directory '%1'
建立 %1 目錄失敗
Recorder failed to open file '%1'
錄音機開啟 '%1' 失敗
.wav - Uncompressed
.wav - 未壓縮
.ogg (Vorbis) - Compressed
.ogg (Vorbis) - 有壓縮
.au - Uncompressed
.au - 未壓縮
.flac - Lossless compressed
.flac - 無損壓縮
VoiceRecorderDialog
Recorder
錄音
Control
控制
00:00:00
00:00:00
&Start
開始(&S)
S&top
停止(&t)
Mode
模式
Multichannel
多聲道
Output
輸出
Output format
輸出格式
Target directory
輸出目錄
Filename
檔案名稱
&Browse...
瀏覽(&B)...
Valid variables are:
無效的變量:
Inserts the user's name
插入使用者名稱
Inserts the current date
插入目前日期
Inserts the current time
插入目前時間
Inserts the hostname
插入主機名稱
Recorder still running
持續錄音中
Closing the recorder without stopping it will discard unwritten audio. Do you really want to close the recorder?
不停止錄音而直接關閉將導致未寫入的音效檔廢棄。您確定要關閉錄音?
Unable to start recording. Not connected to a server.
無法開始錄音。沒有與伺服器連線。
The server you are currently connected to is version 1.2.2 or older. For privacy reasons, recording on servers of versions older than 1.2.3 is not possible.
Please contact your server administrator for further information.
目前連線的伺服器版本為 1.2.2 或更舊版,因此無法錄音。在低於 1.2.3 版的伺服器上無法錄音。
請聯絡伺服器管理員獲得更多訊息。
There is already a recorder active for this server.
已有一個錄音機在本伺服器使用。
Please select a recording format.
請選擇錄音格式。
Stopping
停止中
Select target directory
選擇目標目錄
Downmix
立體聲轉單聲道
WASAPIInput
Access to the microphone was denied. Please check that your operating system's microphone settings allow Mumble to use the microphone.
WASAPISystem
Default Device
預設裝置
qwPTTButtonWidget
Mumble PTT
Mumble 按鍵發話
Push to talk
按鍵發話