[tx-robot] updated from transifex

42 files changed, 424 insertions, 424 deletions

diff --git a/apps/twofactor_backupcodes/l10n/bg.js b/apps/twofactor_backupcodes/l10n/bg.js
index 44d59145de3..d385c7fcdb4 100644
--- a/apps/twofactor_backupcodes/l10n/bg.js
+++ b/apps/twofactor_backupcodes/l10n/bg.js
@@ -1,10 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "активиран",
-    "deactivated" : "деактивиран",
-    "created" : "създаден",
-    "destroyed" : "унищожен",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Това е вашия резервен код. Моля, запишете го (или го принтирайте) защото по-късно няма да имате възможност да го видите.",
     "Save backup codes" : "Записване на резервния код",
     "Print backup codes" : "Принтиране на резервния код",
@@ -18,6 +14,10 @@ OC.L10N.register(
     "Second-factor backup codes" : "Резервен код за втората стъпка",
     "You have enabled two-factor authentication but have not yet generated backup codes. Be sure to do this in case you lose access to your second factor." : "Включили сте двустепенното удостоверяването, но не сте създали резервен код. Моля, създайте резервен код, който да ползвате когато загубите достъп до устройството генериращо кода за втората стъпка в удостоверяването.",
     "Backup code" : "Резервен код",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода.",
+    "activated" : "активиран",
+    "deactivated" : "деактивиран",
+    "created" : "създаден",
+    "destroyed" : "унищожен"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/bg.json b/apps/twofactor_backupcodes/l10n/bg.json
index fd20b08d44b..e3f1725a659 100644
--- a/apps/twofactor_backupcodes/l10n/bg.json
+++ b/apps/twofactor_backupcodes/l10n/bg.json
@@ -1,8 +1,4 @@
 { "translations": {
-    "activated" : "активиран",
-    "deactivated" : "деактивиран",
-    "created" : "създаден",
-    "destroyed" : "унищожен",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Това е вашия резервен код. Моля, запишете го (или го принтирайте) защото по-късно няма да имате възможност да го видите.",
     "Save backup codes" : "Записване на резервния код",
     "Print backup codes" : "Принтиране на резервния код",
@@ -16,6 +12,10 @@
     "Second-factor backup codes" : "Резервен код за втората стъпка",
     "You have enabled two-factor authentication but have not yet generated backup codes. Be sure to do this in case you lose access to your second factor." : "Включили сте двустепенното удостоверяването, но не сте създали резервен код. Моля, създайте резервен код, който да ползвате когато загубите достъп до устройството генериращо кода за втората стъпка в удостоверяването.",
     "Backup code" : "Резервен код",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервен код е бил генериран. Използвани са {{used}} от {{total}} кода.",
+    "activated" : "активиран",
+    "deactivated" : "деактивиран",
+    "created" : "създаден",
+    "destroyed" : "унищожен"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/cs.js b/apps/twofactor_backupcodes/l10n/cs.js
index 0861065ec70..3fbcf92cd2e 100644
--- a/apps/twofactor_backupcodes/l10n/cs.js
+++ b/apps/twofactor_backupcodes/l10n/cs.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "aktivováno",
-    "updated" : "aktualizováno",
-    "mounted" : "připojeno (mount)",
-    "deactivated" : "deaktivováno",
-    "beforeCreate" : "předVytvořením",
-    "created" : "vytvořen",
-    "beforeUpdate" : "předAktualizací",
-    "beforeDestroy" : "předZničením",
-    "destroyed" : "zničeno",
-    "beforeMount" : "předPřipojením",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Zde jsou vaše záložní kódy. Kódy si uložte a/nebo vytiskněte, protože už je nebude možné zobrazit znovu.",
     "Save backup codes" : "Uložit záložní kódy",
     "Print backup codes" : "Vytisknout záložní kódy",
@@ -29,6 +19,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Poskytovatel záložních kódů pro dvoustupňové ověřování",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Použijte jeden ze svých záložních kódů které jste si uložili při nastavování dvoufázového ověřování.",
     "Submit" : "Odeslat",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito.",
+    "activated" : "aktivováno",
+    "updated" : "aktualizováno",
+    "mounted" : "připojeno (mount)",
+    "deactivated" : "deaktivováno",
+    "beforeCreate" : "předVytvořením",
+    "created" : "vytvořen",
+    "beforeUpdate" : "předAktualizací",
+    "beforeDestroy" : "předZničením",
+    "destroyed" : "zničeno",
+    "beforeMount" : "předPřipojením"
 },
 "nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;");
diff --git a/apps/twofactor_backupcodes/l10n/cs.json b/apps/twofactor_backupcodes/l10n/cs.json
index 48bbf9d1b65..06b11c419bf 100644
--- a/apps/twofactor_backupcodes/l10n/cs.json
+++ b/apps/twofactor_backupcodes/l10n/cs.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "aktivováno",
-    "updated" : "aktualizováno",
-    "mounted" : "připojeno (mount)",
-    "deactivated" : "deaktivováno",
-    "beforeCreate" : "předVytvořením",
-    "created" : "vytvořen",
-    "beforeUpdate" : "předAktualizací",
-    "beforeDestroy" : "předZničením",
-    "destroyed" : "zničeno",
-    "beforeMount" : "předPřipojením",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Zde jsou vaše záložní kódy. Kódy si uložte a/nebo vytiskněte, protože už je nebude možné zobrazit znovu.",
     "Save backup codes" : "Uložit záložní kódy",
     "Print backup codes" : "Vytisknout záložní kódy",
@@ -27,6 +17,16 @@
     "A two-factor auth backup codes provider" : "Poskytovatel záložních kódů pro dvoustupňové ověřování",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Použijte jeden ze svých záložních kódů které jste si uložili při nastavování dvoufázového ověřování.",
     "Submit" : "Odeslat",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Záložní kódy byly vytvořeny. {{used}} z {{total}} kódů bylo využito.",
+    "activated" : "aktivováno",
+    "updated" : "aktualizováno",
+    "mounted" : "připojeno (mount)",
+    "deactivated" : "deaktivováno",
+    "beforeCreate" : "předVytvořením",
+    "created" : "vytvořen",
+    "beforeUpdate" : "předAktualizací",
+    "beforeDestroy" : "předZničením",
+    "destroyed" : "zničeno",
+    "beforeMount" : "předPřipojením"
 },"pluralForm" :"nplurals=4; plural=(n == 1 && n % 1 == 0) ? 0 : (n >= 2 && n <= 4 && n % 1 == 0) ? 1: (n % 1 != 0 ) ? 2 : 3;"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/de.js b/apps/twofactor_backupcodes/l10n/de.js
index a5b475165b8..454b192aea0 100644
--- a/apps/twofactor_backupcodes/l10n/de.js
+++ b/apps/twofactor_backupcodes/l10n/de.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "Aktiviert",
-    "updated" : "Aktualisiert",
-    "mounted" : "Eingebunden",
-    "deactivated" : "Deaktiviert",
-    "beforeCreate" : "beforeCreate",
-    "created" : "Erstellt",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "Vernichtet",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Deine Backup-Codes.  Bitte speichere und/oder drucke  diese aus, da diese Codes später nicht mehr gelesen werden können",
     "Save backup codes" : "Backup-Codes speichern",
     "Print backup codes" : "Backup-Codes drucken",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwende einen der Backup-Codes, den Du bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert hast.",
     "Submit" : "Übermitteln",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt.",
+    "activated" : "Aktiviert",
+    "updated" : "Aktualisiert",
+    "mounted" : "Eingebunden",
+    "deactivated" : "Deaktiviert",
+    "beforeCreate" : "beforeCreate",
+    "created" : "Erstellt",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "Vernichtet",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/de.json b/apps/twofactor_backupcodes/l10n/de.json
index 26a0f1be897..437522b0a82 100644
--- a/apps/twofactor_backupcodes/l10n/de.json
+++ b/apps/twofactor_backupcodes/l10n/de.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "Aktiviert",
-    "updated" : "Aktualisiert",
-    "mounted" : "Eingebunden",
-    "deactivated" : "Deaktiviert",
-    "beforeCreate" : "beforeCreate",
-    "created" : "Erstellt",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "Vernichtet",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Deine Backup-Codes.  Bitte speichere und/oder drucke  diese aus, da diese Codes später nicht mehr gelesen werden können",
     "Save backup codes" : "Backup-Codes speichern",
     "Print backup codes" : "Backup-Codes drucken",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwende einen der Backup-Codes, den Du bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert hast.",
     "Submit" : "Übermitteln",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erstellt. {{used}} von {{total}} Codes wurden benutzt.",
+    "activated" : "Aktiviert",
+    "updated" : "Aktualisiert",
+    "mounted" : "Eingebunden",
+    "deactivated" : "Deaktiviert",
+    "beforeCreate" : "beforeCreate",
+    "created" : "Erstellt",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "Vernichtet",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/de_DE.js b/apps/twofactor_backupcodes/l10n/de_DE.js
index 0573fb9d8a7..cb8b3eeaf74 100644
--- a/apps/twofactor_backupcodes/l10n/de_DE.js
+++ b/apps/twofactor_backupcodes/l10n/de_DE.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "Aktiviert",
-    "updated" : "Aktualisiert",
-    "mounted" : "Eingebunden",
-    "deactivated" : "Deaktiviert",
-    "beforeCreate" : "beforeCreate",
-    "created" : "Erstellt",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "Vernichtet",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Ihre Backup-Codes. Bitte speichern und/oder drucken Sie diese, da diese Codes später nicht mehr gelesen werden können",
     "Save backup codes" : "Backup-Codes speichern",
     "Print backup codes" : "Backup-Codes drucken",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwenden Sie einen der Backup-Codes, den Sie bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert haben.",
     "Submit" : "Übermitteln",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt.",
+    "activated" : "Aktiviert",
+    "updated" : "Aktualisiert",
+    "mounted" : "Eingebunden",
+    "deactivated" : "Deaktiviert",
+    "beforeCreate" : "beforeCreate",
+    "created" : "Erstellt",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "Vernichtet",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/de_DE.json b/apps/twofactor_backupcodes/l10n/de_DE.json
index 57716668ae6..3903387a982 100644
--- a/apps/twofactor_backupcodes/l10n/de_DE.json
+++ b/apps/twofactor_backupcodes/l10n/de_DE.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "Aktiviert",
-    "updated" : "Aktualisiert",
-    "mounted" : "Eingebunden",
-    "deactivated" : "Deaktiviert",
-    "beforeCreate" : "beforeCreate",
-    "created" : "Erstellt",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "Vernichtet",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dies sind Ihre Backup-Codes. Bitte speichern und/oder drucken Sie diese, da diese Codes später nicht mehr gelesen werden können",
     "Save backup codes" : "Backup-Codes speichern",
     "Print backup codes" : "Backup-Codes drucken",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Ein Anbieter für Zweifaktor-Backup-Codes",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Verwenden Sie einen der Backup-Codes, den Sie bei der Einrichtung der Zwei-Faktor-Authentifizierung gespeichert haben.",
     "Submit" : "Übermitteln",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup-Codes wurden erzeugt. {{used}} von {{total}} Codes wurden benutzt.",
+    "activated" : "Aktiviert",
+    "updated" : "Aktualisiert",
+    "mounted" : "Eingebunden",
+    "deactivated" : "Deaktiviert",
+    "beforeCreate" : "beforeCreate",
+    "created" : "Erstellt",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "Vernichtet",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/en_GB.js b/apps/twofactor_backupcodes/l10n/en_GB.js
index 40a5556a5c3..3a82a7b8faf 100644
--- a/apps/twofactor_backupcodes/l10n/en_GB.js
+++ b/apps/twofactor_backupcodes/l10n/en_GB.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "activated",
-    "updated" : "updated",
-    "mounted" : "mounted",
-    "deactivated" : "deactivated",
-    "beforeCreate" : "beforeCreate",
-    "created" : "created",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destroyed",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later",
     "Save backup codes" : "Save backup codes",
     "Print backup codes" : "Print backup codes",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "A two-factor auth backup codes provider",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Use one of the backup codes you saved when setting up two-factor authentication.",
     "Submit" : "Submit",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used.",
+    "activated" : "activated",
+    "updated" : "updated",
+    "mounted" : "mounted",
+    "deactivated" : "deactivated",
+    "beforeCreate" : "beforeCreate",
+    "created" : "created",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destroyed",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/en_GB.json b/apps/twofactor_backupcodes/l10n/en_GB.json
index 838ce57c518..dbf755ace65 100644
--- a/apps/twofactor_backupcodes/l10n/en_GB.json
+++ b/apps/twofactor_backupcodes/l10n/en_GB.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "activated",
-    "updated" : "updated",
-    "mounted" : "mounted",
-    "deactivated" : "deactivated",
-    "beforeCreate" : "beforeCreate",
-    "created" : "created",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destroyed",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later",
     "Save backup codes" : "Save backup codes",
     "Print backup codes" : "Print backup codes",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "A two-factor auth backup codes provider",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Use one of the backup codes you saved when setting up two-factor authentication.",
     "Submit" : "Submit",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes have been generated. {{used}} of {{total}} codes have been used.",
+    "activated" : "activated",
+    "updated" : "updated",
+    "mounted" : "mounted",
+    "deactivated" : "deactivated",
+    "beforeCreate" : "beforeCreate",
+    "created" : "created",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destroyed",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/es.js b/apps/twofactor_backupcodes/l10n/es.js
index dfbf1bbe3b9..c76e49aad02 100644
--- a/apps/twofactor_backupcodes/l10n/es.js
+++ b/apps/twofactor_backupcodes/l10n/es.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "activado",
-    "updated" : "actualizado",
-    "mounted" : "montado",
-    "deactivated" : "desactivado",
-    "beforeCreate" : "beforeCreate",
-    "created" : "creado",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destruido",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estos son sus códigos de respaldo. Por favor guardelos y/o imprimalos ya que no podrá obtenerlos de nuevo.",
     "Save backup codes" : "Guardar códigos de respaldo",
     "Print backup codes" : "Imprimir códigos de respaldo",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Un proveedor de códigos respaldo para verificación en dos pasos",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno de los códigos de respaldo que guardaste cuando activaste la verificación en dos pasos.",
     "Submit" : "Enviar",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}.",
+    "activated" : "activado",
+    "updated" : "actualizado",
+    "mounted" : "montado",
+    "deactivated" : "desactivado",
+    "beforeCreate" : "beforeCreate",
+    "created" : "creado",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destruido",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/es.json b/apps/twofactor_backupcodes/l10n/es.json
index af56e6d9a0e..a420c02acf8 100644
--- a/apps/twofactor_backupcodes/l10n/es.json
+++ b/apps/twofactor_backupcodes/l10n/es.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "activado",
-    "updated" : "actualizado",
-    "mounted" : "montado",
-    "deactivated" : "desactivado",
-    "beforeCreate" : "beforeCreate",
-    "created" : "creado",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destruido",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estos son sus códigos de respaldo. Por favor guardelos y/o imprimalos ya que no podrá obtenerlos de nuevo.",
     "Save backup codes" : "Guardar códigos de respaldo",
     "Print backup codes" : "Imprimir códigos de respaldo",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Un proveedor de códigos respaldo para verificación en dos pasos",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno de los códigos de respaldo que guardaste cuando activaste la verificación en dos pasos.",
     "Submit" : "Enviar",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Se han generado los códigos de respaldo. Estás usando {{used}} de {{total}}.",
+    "activated" : "activado",
+    "updated" : "actualizado",
+    "mounted" : "montado",
+    "deactivated" : "desactivado",
+    "beforeCreate" : "beforeCreate",
+    "created" : "creado",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destruido",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/fr.js b/apps/twofactor_backupcodes/l10n/fr.js
index 0695524be23..7186f82dff7 100644
--- a/apps/twofactor_backupcodes/l10n/fr.js
+++ b/apps/twofactor_backupcodes/l10n/fr.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "activé",
-    "updated" : "mis à jour",
-    "mounted" : "Monté",
-    "deactivated" : "désactivé",
-    "beforeCreate" : "Avant la création",
-    "created" : "créé",
-    "beforeUpdate" : "Avant la mise à jour",
-    "beforeDestroy" : "Avant la suppresion",
-    "destroyed" : "détruit",
-    "beforeMount" : "Avant montage",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Voici vos codes de récupération. Veuillez les sauvegarder et/ou les imprimer car vous ne pourrez plus y avoir accès ultérieurement",
     "Save backup codes" : "Sauvegarder les codes de récupération",
     "Print backup codes" : "Imprimer les codes de récupération",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Un fournisseur de codes de récupération d'authentification à deux facteurs",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Utilisez l'un des codes de secours que vous avez crée lors du paramétrage de l'authentification à deux facteurs.",
     "Submit" : "Envoyer",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés.",
+    "activated" : "activé",
+    "updated" : "mis à jour",
+    "mounted" : "Monté",
+    "deactivated" : "désactivé",
+    "beforeCreate" : "Avant la création",
+    "created" : "créé",
+    "beforeUpdate" : "Avant la mise à jour",
+    "beforeDestroy" : "Avant la suppresion",
+    "destroyed" : "détruit",
+    "beforeMount" : "Avant montage"
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/apps/twofactor_backupcodes/l10n/fr.json b/apps/twofactor_backupcodes/l10n/fr.json
index b96a9f4ebb8..8052387cd0c 100644
--- a/apps/twofactor_backupcodes/l10n/fr.json
+++ b/apps/twofactor_backupcodes/l10n/fr.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "activé",
-    "updated" : "mis à jour",
-    "mounted" : "Monté",
-    "deactivated" : "désactivé",
-    "beforeCreate" : "Avant la création",
-    "created" : "créé",
-    "beforeUpdate" : "Avant la mise à jour",
-    "beforeDestroy" : "Avant la suppresion",
-    "destroyed" : "détruit",
-    "beforeMount" : "Avant montage",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Voici vos codes de récupération. Veuillez les sauvegarder et/ou les imprimer car vous ne pourrez plus y avoir accès ultérieurement",
     "Save backup codes" : "Sauvegarder les codes de récupération",
     "Print backup codes" : "Imprimer les codes de récupération",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Un fournisseur de codes de récupération d'authentification à deux facteurs",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Utilisez l'un des codes de secours que vous avez crée lors du paramétrage de l'authentification à deux facteurs.",
     "Submit" : "Envoyer",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Les codes de récupération ont été générés. {{used}} codes sur {{total}} ont été utilisés.",
+    "activated" : "activé",
+    "updated" : "mis à jour",
+    "mounted" : "Monté",
+    "deactivated" : "désactivé",
+    "beforeCreate" : "Avant la création",
+    "created" : "créé",
+    "beforeUpdate" : "Avant la mise à jour",
+    "beforeDestroy" : "Avant la suppresion",
+    "destroyed" : "détruit",
+    "beforeMount" : "Avant montage"
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/gl.js b/apps/twofactor_backupcodes/l10n/gl.js
index 8ba24096413..954d511553f 100644
--- a/apps/twofactor_backupcodes/l10n/gl.js
+++ b/apps/twofactor_backupcodes/l10n/gl.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "activado",
-    "updated" : "actualizado",
-    "mounted" : "montado",
-    "deactivated" : "desactivado",
-    "beforeCreate" : "antesDaCreación",
-    "created" : "creado",
-    "beforeUpdate" : "antesDaActualización",
-    "beforeDestroy" : "antesDaDestrución",
-    "destroyed" : "destruído",
-    "beforeMount" : "antesDaMontaxe",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes son os seus códigos de seguranza. Gárdeos e/ou imprímaos xa que non poderá volver lelos de novo.",
     "Save backup codes" : "Gardar os códigos de seguranza",
     "Print backup codes" : "Imprimir os códigos de seguranza",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Un provedor de códigos de seguranza para a autenticación de dous factores",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Use un dos códigos de seguranza que gardou cuando axustou a autenticación de dous factores.",
     "Submit" : "Enviar ",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}.",
+    "activated" : "activado",
+    "updated" : "actualizado",
+    "mounted" : "montado",
+    "deactivated" : "desactivado",
+    "beforeCreate" : "antesDaCreación",
+    "created" : "creado",
+    "beforeUpdate" : "antesDaActualización",
+    "beforeDestroy" : "antesDaDestrución",
+    "destroyed" : "destruído",
+    "beforeMount" : "antesDaMontaxe"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/gl.json b/apps/twofactor_backupcodes/l10n/gl.json
index 2bdd624c169..64b13b3136c 100644
--- a/apps/twofactor_backupcodes/l10n/gl.json
+++ b/apps/twofactor_backupcodes/l10n/gl.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "activado",
-    "updated" : "actualizado",
-    "mounted" : "montado",
-    "deactivated" : "desactivado",
-    "beforeCreate" : "antesDaCreación",
-    "created" : "creado",
-    "beforeUpdate" : "antesDaActualización",
-    "beforeDestroy" : "antesDaDestrución",
-    "destroyed" : "destruído",
-    "beforeMount" : "antesDaMontaxe",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes son os seus códigos de seguranza. Gárdeos e/ou imprímaos xa que non poderá volver lelos de novo.",
     "Save backup codes" : "Gardar os códigos de seguranza",
     "Print backup codes" : "Imprimir os códigos de seguranza",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Un provedor de códigos de seguranza para a autenticación de dous factores",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Use un dos códigos de seguranza que gardou cuando axustou a autenticación de dous factores.",
     "Submit" : "Enviar ",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Los códigos de seguranza foron xerados. Usou {{used}} códigos de {{total}}.",
+    "activated" : "activado",
+    "updated" : "actualizado",
+    "mounted" : "montado",
+    "deactivated" : "desactivado",
+    "beforeCreate" : "antesDaCreación",
+    "created" : "creado",
+    "beforeUpdate" : "antesDaActualización",
+    "beforeDestroy" : "antesDaDestrución",
+    "destroyed" : "destruído",
+    "beforeMount" : "antesDaMontaxe"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/hu.js b/apps/twofactor_backupcodes/l10n/hu.js
index 4d9f15f3777..16d3bcc3e59 100644
--- a/apps/twofactor_backupcodes/l10n/hu.js
+++ b/apps/twofactor_backupcodes/l10n/hu.js
@@ -1,8 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "Aktivált",
-    "updated" : "frissítve",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ezek a biztonsági kódjaid. Kérlek mentsd el vagy nyomtasd ki őket úgy hogy később is meglegyenek.",
     "Save backup codes" : "Biztonsági kódok mentése",
     "Print backup codes" : "Biztonsági kódok nyomtatása",
@@ -18,6 +16,8 @@ OC.L10N.register(
     "Two factor backup codes" : "Kétfaktoros biztonsági mentési kódok",
     "A two-factor auth backup codes provider" : "Kétfaktoros azonosítás biztonsági kódok szolgáltatója",
     "Submit" : "Küldés",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}.",
+    "activated" : "Aktivált",
+    "updated" : "frissítve"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/hu.json b/apps/twofactor_backupcodes/l10n/hu.json
index 299f11dc616..53adb544296 100644
--- a/apps/twofactor_backupcodes/l10n/hu.json
+++ b/apps/twofactor_backupcodes/l10n/hu.json
@@ -1,6 +1,4 @@
 { "translations": {
-    "activated" : "Aktivált",
-    "updated" : "frissítve",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ezek a biztonsági kódjaid. Kérlek mentsd el vagy nyomtasd ki őket úgy hogy később is meglegyenek.",
     "Save backup codes" : "Biztonsági kódok mentése",
     "Print backup codes" : "Biztonsági kódok nyomtatása",
@@ -16,6 +14,8 @@
     "Two factor backup codes" : "Kétfaktoros biztonsági mentési kódok",
     "A two-factor auth backup codes provider" : "Kétfaktoros azonosítás biztonsági kódok szolgáltatója",
     "Submit" : "Küldés",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "A biztonsági kódok elkészültek. Felhasználva: {{used}}, ennyiből: {{total}}.",
+    "activated" : "Aktivált",
+    "updated" : "frissítve"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/is.js b/apps/twofactor_backupcodes/l10n/is.js
index ab7b8da6797..d1975286eeb 100644
--- a/apps/twofactor_backupcodes/l10n/is.js
+++ b/apps/twofactor_backupcodes/l10n/is.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "virkjað",
-    "updated" : "uppfært",
-    "mounted" : "tengt í skráakerfi",
-    "deactivated" : "afvirkjað",
-    "beforeCreate" : "beforeCreate",
-    "created" : "búið til",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "eyðilagt",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Þetta eru öryggisafritunarkóðarnir þínir. Vistaðu þá og/eða prentaðu þá út, því þú munt ekki geta lesið þá aftur síðar í ferlinu",
     "Save backup codes" : "Vista öryggisafritunarkóða",
     "Print backup codes" : "Prenta öryggisafritunarkóða",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Útgefandi tveggja-þrepa öryggisafritunarkóða",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Notaðu einn af öryggisafritunarkóðunum sem þú vistaðir þegar þú settir upp tveggja-þátta auðkenningu.",
     "Submit" : "Senda inn",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir.",
+    "activated" : "virkjað",
+    "updated" : "uppfært",
+    "mounted" : "tengt í skráakerfi",
+    "deactivated" : "afvirkjað",
+    "beforeCreate" : "beforeCreate",
+    "created" : "búið til",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "eyðilagt",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);");
diff --git a/apps/twofactor_backupcodes/l10n/is.json b/apps/twofactor_backupcodes/l10n/is.json
index f0a86db945f..0f4796b657a 100644
--- a/apps/twofactor_backupcodes/l10n/is.json
+++ b/apps/twofactor_backupcodes/l10n/is.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "virkjað",
-    "updated" : "uppfært",
-    "mounted" : "tengt í skráakerfi",
-    "deactivated" : "afvirkjað",
-    "beforeCreate" : "beforeCreate",
-    "created" : "búið til",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "eyðilagt",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Þetta eru öryggisafritunarkóðarnir þínir. Vistaðu þá og/eða prentaðu þá út, því þú munt ekki geta lesið þá aftur síðar í ferlinu",
     "Save backup codes" : "Vista öryggisafritunarkóða",
     "Print backup codes" : "Prenta öryggisafritunarkóða",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Útgefandi tveggja-þrepa öryggisafritunarkóða",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Notaðu einn af öryggisafritunarkóðunum sem þú vistaðir þegar þú settir upp tveggja-þátta auðkenningu.",
     "Submit" : "Senda inn",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Öryggisafritunarkóðar hafa verið útbúnir. {{used}} af {{total}} kóðum hafa verið notaðir.",
+    "activated" : "virkjað",
+    "updated" : "uppfært",
+    "mounted" : "tengt í skráakerfi",
+    "deactivated" : "afvirkjað",
+    "beforeCreate" : "beforeCreate",
+    "created" : "búið til",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "eyðilagt",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n % 10 != 1 || n % 100 == 11);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/it.js b/apps/twofactor_backupcodes/l10n/it.js
index f94283acd5d..03a034179e4 100644
--- a/apps/twofactor_backupcodes/l10n/it.js
+++ b/apps/twofactor_backupcodes/l10n/it.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "attivati",
-    "updated" : "aggiornati",
-    "mounted" : "montati",
-    "deactivated" : "disattivati",
-    "beforeCreate" : "beforeCreate",
-    "created" : "creati",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "distrutti",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Questi sono i tuoi codici di backup. Salvali e/o stampali poiché non potrai più leggerli successivamente",
     "Save backup codes" : "Salva i codici di backup",
     "Print backup codes" : "Stampa i codici di backup",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Un fornitore di codici di backup per l'autenticazione a due fattori",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno dei codici di backup che hai salvato quando configuri l'autenticazione a due fattori.",
     "Submit" : "Invia",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati.",
+    "activated" : "attivati",
+    "updated" : "aggiornati",
+    "mounted" : "montati",
+    "deactivated" : "disattivati",
+    "beforeCreate" : "beforeCreate",
+    "created" : "creati",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "distrutti",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/it.json b/apps/twofactor_backupcodes/l10n/it.json
index 2e2f9716a10..eb53c62be07 100644
--- a/apps/twofactor_backupcodes/l10n/it.json
+++ b/apps/twofactor_backupcodes/l10n/it.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "attivati",
-    "updated" : "aggiornati",
-    "mounted" : "montati",
-    "deactivated" : "disattivati",
-    "beforeCreate" : "beforeCreate",
-    "created" : "creati",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "distrutti",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Questi sono i tuoi codici di backup. Salvali e/o stampali poiché non potrai più leggerli successivamente",
     "Save backup codes" : "Salva i codici di backup",
     "Print backup codes" : "Stampa i codici di backup",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Un fornitore di codici di backup per l'autenticazione a due fattori",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Usa uno dei codici di backup che hai salvato quando configuri l'autenticazione a due fattori.",
     "Submit" : "Invia",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "I codici di backup sono stati generali. {{used}} di {{total}} codici sono stati utilizzati.",
+    "activated" : "attivati",
+    "updated" : "aggiornati",
+    "mounted" : "montati",
+    "deactivated" : "disattivati",
+    "beforeCreate" : "beforeCreate",
+    "created" : "creati",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "distrutti",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/ja.js b/apps/twofactor_backupcodes/l10n/ja.js
index 130c24a784a..59c825b25ad 100644
--- a/apps/twofactor_backupcodes/l10n/ja.js
+++ b/apps/twofactor_backupcodes/l10n/ja.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "活性化されました",
-    "updated" : "アップデートされました",
-    "mounted" : "マウントされました",
-    "deactivated" : "失効した",
-    "beforeCreate" : "作成前",
-    "created" : "作成されました",
-    "beforeUpdate" : "更新前",
-    "beforeDestroy" : "破棄前",
-    "destroyed" : "破棄されました",
-    "beforeMount" : "マウント前",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "これらはあなたのバックアップコードです。 後からこのコードは見ることはできないので、保存するか印刷しておいてください",
     "Save backup codes" : "バックアップコードを保存",
     "Print backup codes" : "バックアップコードを印刷",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "2要素認証バックアップコードプロバイダ",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "2要素認証を設定するときに保存したバックアップコードのいずれかを使用します。",
     "Submit" : "了解",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。"
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。",
+    "activated" : "活性化されました",
+    "updated" : "アップデートされました",
+    "mounted" : "マウントされました",
+    "deactivated" : "失効した",
+    "beforeCreate" : "作成前",
+    "created" : "作成されました",
+    "beforeUpdate" : "更新前",
+    "beforeDestroy" : "破棄前",
+    "destroyed" : "破棄されました",
+    "beforeMount" : "マウント前"
 },
 "nplurals=1; plural=0;");
diff --git a/apps/twofactor_backupcodes/l10n/ja.json b/apps/twofactor_backupcodes/l10n/ja.json
index 5c9c927f7d8..f4711c7f0f8 100644
--- a/apps/twofactor_backupcodes/l10n/ja.json
+++ b/apps/twofactor_backupcodes/l10n/ja.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "活性化されました",
-    "updated" : "アップデートされました",
-    "mounted" : "マウントされました",
-    "deactivated" : "失効した",
-    "beforeCreate" : "作成前",
-    "created" : "作成されました",
-    "beforeUpdate" : "更新前",
-    "beforeDestroy" : "破棄前",
-    "destroyed" : "破棄されました",
-    "beforeMount" : "マウント前",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "これらはあなたのバックアップコードです。 後からこのコードは見ることはできないので、保存するか印刷しておいてください",
     "Save backup codes" : "バックアップコードを保存",
     "Print backup codes" : "バックアップコードを印刷",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "2要素認証バックアップコードプロバイダ",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "2要素認証を設定するときに保存したバックアップコードのいずれかを使用します。",
     "Submit" : "了解",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。"
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "バックアップコードが生成されました。 {{total}} 中の {{used}} コードが使用されています。",
+    "activated" : "活性化されました",
+    "updated" : "アップデートされました",
+    "mounted" : "マウントされました",
+    "deactivated" : "失効した",
+    "beforeCreate" : "作成前",
+    "created" : "作成されました",
+    "beforeUpdate" : "更新前",
+    "beforeDestroy" : "破棄前",
+    "destroyed" : "破棄されました",
+    "beforeMount" : "マウント前"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/nb.js b/apps/twofactor_backupcodes/l10n/nb.js
index 0287b16aace..12c1a0c33d3 100644
--- a/apps/twofactor_backupcodes/l10n/nb.js
+++ b/apps/twofactor_backupcodes/l10n/nb.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "aktivert",
-    "updated" : "oppdatert",
-    "mounted" : "tilkoblet",
-    "deactivated" : "deaktivert",
-    "beforeCreate" : "beforeCreate",
-    "created" : "opprettet",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "ødelagt",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dette er sikkerhetskopi-kodene. Lagre og/eller skriv dem ut siden du ikke vil kunne se kodene her igjen senere.",
     "Save backup codes" : "Lagre sikkerhetskopi-kodene",
     "Print backup codes" : "Skriv ut sikkerhetskopi-koder",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "En leverandør av sikkerhetskopi av to-faktor koder",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Bruk en av backup kodene du lagret når du opprettet to-faktor autentisering.",
     "Submit" : "Send",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk.",
+    "activated" : "aktivert",
+    "updated" : "oppdatert",
+    "mounted" : "tilkoblet",
+    "deactivated" : "deaktivert",
+    "beforeCreate" : "beforeCreate",
+    "created" : "opprettet",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "ødelagt",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/nb.json b/apps/twofactor_backupcodes/l10n/nb.json
index 14a0dfe4b41..f74857770d5 100644
--- a/apps/twofactor_backupcodes/l10n/nb.json
+++ b/apps/twofactor_backupcodes/l10n/nb.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "aktivert",
-    "updated" : "oppdatert",
-    "mounted" : "tilkoblet",
-    "deactivated" : "deaktivert",
-    "beforeCreate" : "beforeCreate",
-    "created" : "opprettet",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "ødelagt",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dette er sikkerhetskopi-kodene. Lagre og/eller skriv dem ut siden du ikke vil kunne se kodene her igjen senere.",
     "Save backup codes" : "Lagre sikkerhetskopi-kodene",
     "Print backup codes" : "Skriv ut sikkerhetskopi-koder",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "En leverandør av sikkerhetskopi av to-faktor koder",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Bruk en av backup kodene du lagret når du opprettet to-faktor autentisering.",
     "Submit" : "Send",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Sikkerhetskopi-koder har blitt opprettet. {{used}} av {{total}} koder i bruk.",
+    "activated" : "aktivert",
+    "updated" : "oppdatert",
+    "mounted" : "tilkoblet",
+    "deactivated" : "deaktivert",
+    "beforeCreate" : "beforeCreate",
+    "created" : "opprettet",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "ødelagt",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/nl.js b/apps/twofactor_backupcodes/l10n/nl.js
index 3e4e61f4056..20ad8d799b7 100644
--- a/apps/twofactor_backupcodes/l10n/nl.js
+++ b/apps/twofactor_backupcodes/l10n/nl.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "geactiveerd",
-    "updated" : "geüpdatet",
-    "mounted" : "aangekoppeld",
-    "deactivated" : "uitgeschakeld",
-    "beforeCreate" : "beforeCreate",
-    "created" : "gecreëerd",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "vernietigd",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dit zijn je back-upcodes. Bewaar ze en/of druk ze alsjeblieft af, want je ze niet later nog een keer opvragen.",
     "Save backup codes" : "Bewaren backup code",
     "Print backup codes" : "Afdrukken backup code",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Een two-factor auth backup codes provider",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Gebruik een van de backupcodes die je bewaarde bij het inschakelen van de twee-factor authenticatie.",
     "Submit" : "Verwerken",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt.",
+    "activated" : "geactiveerd",
+    "updated" : "geüpdatet",
+    "mounted" : "aangekoppeld",
+    "deactivated" : "uitgeschakeld",
+    "beforeCreate" : "beforeCreate",
+    "created" : "gecreëerd",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "vernietigd",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/nl.json b/apps/twofactor_backupcodes/l10n/nl.json
index cf8712fb5c9..92e9d98d35e 100644
--- a/apps/twofactor_backupcodes/l10n/nl.json
+++ b/apps/twofactor_backupcodes/l10n/nl.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "geactiveerd",
-    "updated" : "geüpdatet",
-    "mounted" : "aangekoppeld",
-    "deactivated" : "uitgeschakeld",
-    "beforeCreate" : "beforeCreate",
-    "created" : "gecreëerd",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "vernietigd",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Dit zijn je back-upcodes. Bewaar ze en/of druk ze alsjeblieft af, want je ze niet later nog een keer opvragen.",
     "Save backup codes" : "Bewaren backup code",
     "Print backup codes" : "Afdrukken backup code",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Een two-factor auth backup codes provider",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Gebruik een van de backupcodes die je bewaarde bij het inschakelen van de twee-factor authenticatie.",
     "Submit" : "Verwerken",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Backup codes zijn gegenereerd. {{used}} van {{total}} codes zijn gebruikt.",
+    "activated" : "geactiveerd",
+    "updated" : "geüpdatet",
+    "mounted" : "aangekoppeld",
+    "deactivated" : "uitgeschakeld",
+    "beforeCreate" : "beforeCreate",
+    "created" : "gecreëerd",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "vernietigd",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/pl.js b/apps/twofactor_backupcodes/l10n/pl.js
index 3f99e2faad1..d2f248f26f9 100644
--- a/apps/twofactor_backupcodes/l10n/pl.js
+++ b/apps/twofactor_backupcodes/l10n/pl.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "aktowowane",
-    "updated" : "zaktualizowane",
-    "mounted" : "zamontowane",
-    "deactivated" : "zdezaktywowane",
-    "beforeCreate" : "przed utworzeniem",
-    "created" : "utworzone",
-    "beforeUpdate" : "przed aktualizacją",
-    "beforeDestroy" : "przed zniszczeniem",
-    "destroyed" : "zniszczone",
-    "beforeMount" : "przed zamontowaniem",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "To są kody zapasowe. Proszę je zapisać i/lub wydrukować, ponieważ później nie będzie można ich ponownie odczytać",
     "Save backup codes" : "Zapisz kody zapasowe",
     "Print backup codes" : "Drukuj kody zapasowe",
@@ -26,6 +16,16 @@ OC.L10N.register(
     "Use backup code" : "Użyj kodu zapasowego",
     "Two factor backup codes" : "Kody zapasowe uwierzytelnienia dwuskładnikowego",
     "A two-factor auth backup codes provider" : "Dostawca dwuskładnikowych kodów zapasowych ",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych.",
+    "activated" : "aktowowane",
+    "updated" : "zaktualizowane",
+    "mounted" : "zamontowane",
+    "deactivated" : "zdezaktywowane",
+    "beforeCreate" : "przed utworzeniem",
+    "created" : "utworzone",
+    "beforeUpdate" : "przed aktualizacją",
+    "beforeDestroy" : "przed zniszczeniem",
+    "destroyed" : "zniszczone",
+    "beforeMount" : "przed zamontowaniem"
 },
 "nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);");
diff --git a/apps/twofactor_backupcodes/l10n/pl.json b/apps/twofactor_backupcodes/l10n/pl.json
index 9b77503d3be..be9ed319faa 100644
--- a/apps/twofactor_backupcodes/l10n/pl.json
+++ b/apps/twofactor_backupcodes/l10n/pl.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "aktowowane",
-    "updated" : "zaktualizowane",
-    "mounted" : "zamontowane",
-    "deactivated" : "zdezaktywowane",
-    "beforeCreate" : "przed utworzeniem",
-    "created" : "utworzone",
-    "beforeUpdate" : "przed aktualizacją",
-    "beforeDestroy" : "przed zniszczeniem",
-    "destroyed" : "zniszczone",
-    "beforeMount" : "przed zamontowaniem",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "To są kody zapasowe. Proszę je zapisać i/lub wydrukować, ponieważ później nie będzie można ich ponownie odczytać",
     "Save backup codes" : "Zapisz kody zapasowe",
     "Print backup codes" : "Drukuj kody zapasowe",
@@ -24,6 +14,16 @@
     "Use backup code" : "Użyj kodu zapasowego",
     "Two factor backup codes" : "Kody zapasowe uwierzytelnienia dwuskładnikowego",
     "A two-factor auth backup codes provider" : "Dostawca dwuskładnikowych kodów zapasowych ",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Kody zapasowe zostały wygenerowane. {{used}} z {{total}} kodów zostało wykorzystanych.",
+    "activated" : "aktowowane",
+    "updated" : "zaktualizowane",
+    "mounted" : "zamontowane",
+    "deactivated" : "zdezaktywowane",
+    "beforeCreate" : "przed utworzeniem",
+    "created" : "utworzone",
+    "beforeUpdate" : "przed aktualizacją",
+    "beforeDestroy" : "przed zniszczeniem",
+    "destroyed" : "zniszczone",
+    "beforeMount" : "przed zamontowaniem"
 },"pluralForm" :"nplurals=4; plural=(n==1 ? 0 : (n%10>=2 && n%10<=4) && (n%100<12 || n%100>14) ? 1 : n!=1 && (n%10>=0 && n%10<=1) || (n%10>=5 && n%10<=9) || (n%100>=12 && n%100<=14) ? 2 : 3);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/pt_BR.js b/apps/twofactor_backupcodes/l10n/pt_BR.js
index fedd9dba1e4..ddd691e69c1 100644
--- a/apps/twofactor_backupcodes/l10n/pt_BR.js
+++ b/apps/twofactor_backupcodes/l10n/pt_BR.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "ativado",
-    "updated" : "atualizado",
-    "mounted" : "montado",
-    "deactivated" : "desativado",
-    "beforeCreate" : "beforeCreate",
-    "created" : "criado",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destruído",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes são os seus códigos de backup. Salve e/ou imprima-os, pois não será possível ler os códigos novamente mais tarde",
     "Save backup codes" : "Salvar códigos de backup",
     "Print backup codes" : "Imprimir códigos de backup",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Um provedor de códigos de backup de autenticação de dois fatores",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Use um dos códigos de backup que você salvou ao configurar a autenticação de dois fatores.",
     "Submit" : "Enviar",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados.",
+    "activated" : "ativado",
+    "updated" : "atualizado",
+    "mounted" : "montado",
+    "deactivated" : "desativado",
+    "beforeCreate" : "beforeCreate",
+    "created" : "criado",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destruído",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/apps/twofactor_backupcodes/l10n/pt_BR.json b/apps/twofactor_backupcodes/l10n/pt_BR.json
index 3f9aa0e0e93..e67bc8a466e 100644
--- a/apps/twofactor_backupcodes/l10n/pt_BR.json
+++ b/apps/twofactor_backupcodes/l10n/pt_BR.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "ativado",
-    "updated" : "atualizado",
-    "mounted" : "montado",
-    "deactivated" : "desativado",
-    "beforeCreate" : "beforeCreate",
-    "created" : "criado",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destruído",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Estes são os seus códigos de backup. Salve e/ou imprima-os, pois não será possível ler os códigos novamente mais tarde",
     "Save backup codes" : "Salvar códigos de backup",
     "Print backup codes" : "Imprimir códigos de backup",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Um provedor de códigos de backup de autenticação de dois fatores",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Use um dos códigos de backup que você salvou ao configurar a autenticação de dois fatores.",
     "Submit" : "Enviar",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Códigos de backup foram gerados. {{used}} de {{total}} códigos foram usados.",
+    "activated" : "ativado",
+    "updated" : "atualizado",
+    "mounted" : "montado",
+    "deactivated" : "desativado",
+    "beforeCreate" : "beforeCreate",
+    "created" : "criado",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destruído",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/ru.js b/apps/twofactor_backupcodes/l10n/ru.js
index c638234eb53..9847b1392ce 100644
--- a/apps/twofactor_backupcodes/l10n/ru.js
+++ b/apps/twofactor_backupcodes/l10n/ru.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "activated",
-    "updated" : "updated",
-    "mounted" : "mounted",
-    "deactivated" : "deactivated",
-    "beforeCreate" : "beforeCreate",
-    "created" : "created",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destroyed",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Это ваши резервные коды доступа. Пожалуйста, сохраните и/или распечатайте их, так как вы не сможете увидеть эти коды снова.",
     "Save backup codes" : "Сохранить резервные коды",
     "Print backup codes" : "Распечатать резервные коды",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Провайдер резервных копий для кодов двухфакторной аутентификации",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Использовать для двухфакторной аутентификации один из ранее выпущенных резервных кодов.",
     "Submit" : "Отправить",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов.",
+    "activated" : "activated",
+    "updated" : "updated",
+    "mounted" : "mounted",
+    "deactivated" : "deactivated",
+    "beforeCreate" : "beforeCreate",
+    "created" : "created",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destroyed",
+    "beforeMount" : "beforeMount"
 },
 "nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);");
diff --git a/apps/twofactor_backupcodes/l10n/ru.json b/apps/twofactor_backupcodes/l10n/ru.json
index 6af211d8b17..338833fa225 100644
--- a/apps/twofactor_backupcodes/l10n/ru.json
+++ b/apps/twofactor_backupcodes/l10n/ru.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "activated",
-    "updated" : "updated",
-    "mounted" : "mounted",
-    "deactivated" : "deactivated",
-    "beforeCreate" : "beforeCreate",
-    "created" : "created",
-    "beforeUpdate" : "beforeUpdate",
-    "beforeDestroy" : "beforeDestroy",
-    "destroyed" : "destroyed",
-    "beforeMount" : "beforeMount",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Это ваши резервные коды доступа. Пожалуйста, сохраните и/или распечатайте их, так как вы не сможете увидеть эти коды снова.",
     "Save backup codes" : "Сохранить резервные коды",
     "Print backup codes" : "Распечатать резервные коды",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Провайдер резервных копий для кодов двухфакторной аутентификации",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Использовать для двухфакторной аутентификации один из ранее выпущенных резервных кодов.",
     "Submit" : "Отправить",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Использовано {{used}} из {{total}} ранее выпущенных резервных кодов.",
+    "activated" : "activated",
+    "updated" : "updated",
+    "mounted" : "mounted",
+    "deactivated" : "deactivated",
+    "beforeCreate" : "beforeCreate",
+    "created" : "created",
+    "beforeUpdate" : "beforeUpdate",
+    "beforeDestroy" : "beforeDestroy",
+    "destroyed" : "destroyed",
+    "beforeMount" : "beforeMount"
 },"pluralForm" :"nplurals=4; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 || n%100>14) ? 1 : n%10==0 || (n%10>=5 && n%10<=9) || (n%100>=11 && n%100<=14)? 2 : 3);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/sr.js b/apps/twofactor_backupcodes/l10n/sr.js
index f4619a849f3..f83220e8dc7 100644
--- a/apps/twofactor_backupcodes/l10n/sr.js
+++ b/apps/twofactor_backupcodes/l10n/sr.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "активирано",
-    "updated" : "ажурирано",
-    "mounted" : "монтирано",
-    "deactivated" : "деактивирано",
-    "beforeCreate" : "преКреирања",
-    "created" : "креирано",
-    "beforeUpdate" : "преАжурирања",
-    "beforeDestroy" : "преУништења",
-    "destroyed" : "уништено",
-    "beforeMount" : "преМонтирања",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ово су Ваши резервни кодови. Сачувајте их и/или их одштампајте пошто више нећете моћи да их прочитате.",
     "Save backup codes" : "Сачувај резервне кодове",
     "Print backup codes" : "Одштампај резервне кодове",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "Провајдер резервних кодова за двофакторску ауторизацију",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Искористите један од резервних кодова које сте сачували када се подешавали двофакторску проверу идентитета.",
     "Submit" : "Пошаљи",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено.",
+    "activated" : "активирано",
+    "updated" : "ажурирано",
+    "mounted" : "монтирано",
+    "deactivated" : "деактивирано",
+    "beforeCreate" : "преКреирања",
+    "created" : "креирано",
+    "beforeUpdate" : "преАжурирања",
+    "beforeDestroy" : "преУништења",
+    "destroyed" : "уништено",
+    "beforeMount" : "преМонтирања"
 },
 "nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);");
diff --git a/apps/twofactor_backupcodes/l10n/sr.json b/apps/twofactor_backupcodes/l10n/sr.json
index c40fb428de5..b0c863254f8 100644
--- a/apps/twofactor_backupcodes/l10n/sr.json
+++ b/apps/twofactor_backupcodes/l10n/sr.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "активирано",
-    "updated" : "ажурирано",
-    "mounted" : "монтирано",
-    "deactivated" : "деактивирано",
-    "beforeCreate" : "преКреирања",
-    "created" : "креирано",
-    "beforeUpdate" : "преАжурирања",
-    "beforeDestroy" : "преУништења",
-    "destroyed" : "уништено",
-    "beforeMount" : "преМонтирања",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Ово су Ваши резервни кодови. Сачувајте их и/или их одштампајте пошто више нећете моћи да их прочитате.",
     "Save backup codes" : "Сачувај резервне кодове",
     "Print backup codes" : "Одштампај резервне кодове",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "Провајдер резервних кодова за двофакторску ауторизацију",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "Искористите један од резервних кодова које сте сачували када се подешавали двофакторску проверу идентитета.",
     "Submit" : "Пошаљи",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Резервни кодови су изгенерисани. {{used}} од {{total}} кодова је искоришћено.",
+    "activated" : "активирано",
+    "updated" : "ажурирано",
+    "mounted" : "монтирано",
+    "deactivated" : "деактивирано",
+    "beforeCreate" : "преКреирања",
+    "created" : "креирано",
+    "beforeUpdate" : "преАжурирања",
+    "beforeDestroy" : "преУништења",
+    "destroyed" : "уништено",
+    "beforeMount" : "преМонтирања"
 },"pluralForm" :"nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/sv.js b/apps/twofactor_backupcodes/l10n/sv.js
index b222aa0a5e7..a7b5b1336f0 100644
--- a/apps/twofactor_backupcodes/l10n/sv.js
+++ b/apps/twofactor_backupcodes/l10n/sv.js
@@ -1,11 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "aktiverad",
-    "updated" : "uppdaterad",
-    "mounted" : "monterad",
-    "deactivated" : "inaktiverad",
-    "created" : "skapad",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Detta är dina återställningsnycklar. Vänligen spara och/eller skriv ut dem eftersom du inte kommer kunna se dessa nycklar igen.",
     "Save backup codes" : "Spara återställningsnycklar",
     "Print backup codes" : "Skriv ut återställningsnycklar",
@@ -18,6 +13,11 @@ OC.L10N.register(
     "Second-factor backup codes" : "Tvåfaktorsautentisering",
     "Backup code" : "Återställningsnyckel",
     "Use backup code" : "Använd återställningsnyckel",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts.",
+    "activated" : "aktiverad",
+    "updated" : "uppdaterad",
+    "mounted" : "monterad",
+    "deactivated" : "inaktiverad",
+    "created" : "skapad"
 },
 "nplurals=2; plural=(n != 1);");
diff --git a/apps/twofactor_backupcodes/l10n/sv.json b/apps/twofactor_backupcodes/l10n/sv.json
index ff6dd4b59d1..18b8b8406b4 100644
--- a/apps/twofactor_backupcodes/l10n/sv.json
+++ b/apps/twofactor_backupcodes/l10n/sv.json
@@ -1,9 +1,4 @@
 { "translations": {
-    "activated" : "aktiverad",
-    "updated" : "uppdaterad",
-    "mounted" : "monterad",
-    "deactivated" : "inaktiverad",
-    "created" : "skapad",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Detta är dina återställningsnycklar. Vänligen spara och/eller skriv ut dem eftersom du inte kommer kunna se dessa nycklar igen.",
     "Save backup codes" : "Spara återställningsnycklar",
     "Print backup codes" : "Skriv ut återställningsnycklar",
@@ -16,6 +11,11 @@
     "Second-factor backup codes" : "Tvåfaktorsautentisering",
     "Backup code" : "Återställningsnyckel",
     "Use backup code" : "Använd återställningsnyckel",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Återställningsnycklarna har skapats. {{used}} av {{total}} nycklar har använts.",
+    "activated" : "aktiverad",
+    "updated" : "uppdaterad",
+    "mounted" : "monterad",
+    "deactivated" : "inaktiverad",
+    "created" : "skapad"
 },"pluralForm" :"nplurals=2; plural=(n != 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/tr.js b/apps/twofactor_backupcodes/l10n/tr.js
index cdd6fa5058e..7bdcaa895a2 100644
--- a/apps/twofactor_backupcodes/l10n/tr.js
+++ b/apps/twofactor_backupcodes/l10n/tr.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "etkinleştirildi",
-    "updated" : "güncellendi",
-    "mounted" : "bağlandı",
-    "deactivated" : "devre dışı bırakıldı",
-    "beforeCreate" : "eklenmedenOnce",
-    "created" : "eklenme",
-    "beforeUpdate" : "guncellenmedenOnce",
-    "beforeDestroy" : "yokEdilmedenOnce",
-    "destroyed" : "yokEdildi",
-    "beforeMount" : "baglanmadanOnce",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Yedek kodlarınızı burada görebilirsiniz. Kodları daha sonra göremeyeceğiniz için bu kodları kaydedin ya da yazdırın",
     "Save backup codes" : "Yedek kodları kaydet",
     "Print backup codes" : "Yedek kodları yazdır",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "İki aşamalı kimlik doğrulaması için yedek kodlar sağlayıcısı",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "İki aşamalı kimlik doğrulamasını ayarlarken yedek kodlarından birini kullanın.",
     "Submit" : "Gönder",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor.",
+    "activated" : "etkinleştirildi",
+    "updated" : "güncellendi",
+    "mounted" : "bağlandı",
+    "deactivated" : "devre dışı bırakıldı",
+    "beforeCreate" : "eklenmedenOnce",
+    "created" : "eklenme",
+    "beforeUpdate" : "guncellenmedenOnce",
+    "beforeDestroy" : "yokEdilmedenOnce",
+    "destroyed" : "yokEdildi",
+    "beforeMount" : "baglanmadanOnce"
 },
 "nplurals=2; plural=(n > 1);");
diff --git a/apps/twofactor_backupcodes/l10n/tr.json b/apps/twofactor_backupcodes/l10n/tr.json
index 77b1b650a2e..f3524a2dbd4 100644
--- a/apps/twofactor_backupcodes/l10n/tr.json
+++ b/apps/twofactor_backupcodes/l10n/tr.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "etkinleştirildi",
-    "updated" : "güncellendi",
-    "mounted" : "bağlandı",
-    "deactivated" : "devre dışı bırakıldı",
-    "beforeCreate" : "eklenmedenOnce",
-    "created" : "eklenme",
-    "beforeUpdate" : "guncellenmedenOnce",
-    "beforeDestroy" : "yokEdilmedenOnce",
-    "destroyed" : "yokEdildi",
-    "beforeMount" : "baglanmadanOnce",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "Yedek kodlarınızı burada görebilirsiniz. Kodları daha sonra göremeyeceğiniz için bu kodları kaydedin ya da yazdırın",
     "Save backup codes" : "Yedek kodları kaydet",
     "Print backup codes" : "Yedek kodları yazdır",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "İki aşamalı kimlik doğrulaması için yedek kodlar sağlayıcısı",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "İki aşamalı kimlik doğrulamasını ayarlarken yedek kodlarından birini kullanın.",
     "Submit" : "Gönder",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor."
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "Yedek kodları oluşturuldu. {{used}} / {{total}} kod kullanılıyor.",
+    "activated" : "etkinleştirildi",
+    "updated" : "güncellendi",
+    "mounted" : "bağlandı",
+    "deactivated" : "devre dışı bırakıldı",
+    "beforeCreate" : "eklenmedenOnce",
+    "created" : "eklenme",
+    "beforeUpdate" : "guncellenmedenOnce",
+    "beforeDestroy" : "yokEdilmedenOnce",
+    "destroyed" : "yokEdildi",
+    "beforeMount" : "baglanmadanOnce"
 },"pluralForm" :"nplurals=2; plural=(n > 1);"
 }
\ No newline at end of file
diff --git a/apps/twofactor_backupcodes/l10n/zh_TW.js b/apps/twofactor_backupcodes/l10n/zh_TW.js
index d66c19d2148..fd2a8fb5aed 100644
--- a/apps/twofactor_backupcodes/l10n/zh_TW.js
+++ b/apps/twofactor_backupcodes/l10n/zh_TW.js
@@ -1,16 +1,6 @@
 OC.L10N.register(
     "twofactor_backupcodes",
     {
-    "activated" : "已啟用",
-    "updated" : "已更新",
-    "mounted" : "已掛載",
-    "deactivated" : "已停用",
-    "beforeCreate" : "建立前",
-    "created" : "已建立",
-    "beforeUpdate" : "更新前",
-    "beforeDestroy" : "銷毀前",
-    "destroyed" : "已銷毀",
-    "beforeMount" : "掛載前",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "以下是您的備用碼，由於備用碼不會再次顯示，請儲存 並/或 列印。",
     "Save backup codes" : "儲存備用碼",
     "Print backup codes" : "列印備用碼",
@@ -30,6 +20,16 @@ OC.L10N.register(
     "A two-factor auth backup codes provider" : "兩階段驗證備用碼供應商",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "設定啟用兩階段驗證時，可輸入其中一個您已儲存的備用碼。",
     "Submit" : "送出",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過"
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過",
+    "activated" : "已啟用",
+    "updated" : "已更新",
+    "mounted" : "已掛載",
+    "deactivated" : "已停用",
+    "beforeCreate" : "建立前",
+    "created" : "已建立",
+    "beforeUpdate" : "更新前",
+    "beforeDestroy" : "銷毀前",
+    "destroyed" : "已銷毀",
+    "beforeMount" : "掛載前"
 },
 "nplurals=1; plural=0;");
diff --git a/apps/twofactor_backupcodes/l10n/zh_TW.json b/apps/twofactor_backupcodes/l10n/zh_TW.json
index fb934ba1249..e0b586f0f84 100644
--- a/apps/twofactor_backupcodes/l10n/zh_TW.json
+++ b/apps/twofactor_backupcodes/l10n/zh_TW.json
@@ -1,14 +1,4 @@
 { "translations": {
-    "activated" : "已啟用",
-    "updated" : "已更新",
-    "mounted" : "已掛載",
-    "deactivated" : "已停用",
-    "beforeCreate" : "建立前",
-    "created" : "已建立",
-    "beforeUpdate" : "更新前",
-    "beforeDestroy" : "銷毀前",
-    "destroyed" : "已銷毀",
-    "beforeMount" : "掛載前",
     "These are your backup codes. Please save and/or print them as you will not be able to read the codes again later" : "以下是您的備用碼，由於備用碼不會再次顯示，請儲存 並/或 列印。",
     "Save backup codes" : "儲存備用碼",
     "Print backup codes" : "列印備用碼",
@@ -28,6 +18,16 @@
     "A two-factor auth backup codes provider" : "兩階段驗證備用碼供應商",
     "Use one of the backup codes you saved when setting up two-factor authentication." : "設定啟用兩階段驗證時，可輸入其中一個您已儲存的備用碼。",
     "Submit" : "送出",
-    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過"
+    "Backup codes have been generated. {{used}} of {{total}} codes have been used." : "備用碼已經建立。{{total}}組中有{{used}}組備用碼已被使用過",
+    "activated" : "已啟用",
+    "updated" : "已更新",
+    "mounted" : "已掛載",
+    "deactivated" : "已停用",
+    "beforeCreate" : "建立前",
+    "created" : "已建立",
+    "beforeUpdate" : "更新前",
+    "beforeDestroy" : "銷毀前",
+    "destroyed" : "已銷毀",
+    "beforeMount" : "掛載前"
 },"pluralForm" :"nplurals=1; plural=0;"
 }
\ No newline at end of file